spec sheet cv pump · 2019-04-23 · spec sheet cv pump. installation and training • technical...
TRANSCRIPT
Features:• Pump and motor mounted on a steel base with belt drive, guard, discharge line, surge
chamber and high pressure relief valve• Control panel with disconnect, magnetic starter, full motor protection, 115 volt control circuit, pressure switch and gauge• Suction and vapor return kits available as an option. • Low maintenance • Components designed to allow simple and fast replacement of repair • Exchange Program for rebuilt components • Overnight delivery available• Other manufacturer’s pump parts and service available
Installation and Training • Technical Assistance • Parts and Service
www.cryovation.com www.thecryoshop.com609.914.4792 [email protected] Mary Way Hainesport, NJ 08036
The Model CV Pump Designed specifically for pumping cryogenic liquids for conversion to gas for filling high pressure storage cylinders and various testing, purging and process requirements.
CV PumpSpec Sheet
Installation and Training • Technical Assistance • Parts and Service
www.cryovation.com www.thecryoshop.com609.914.4792 [email protected] Mary Way Hainesport, NJ 08036
Flow Rate: Ranges from 0.5 to 2.2 gpm Pressure: 3500 / 6000 PSI
Standard assembly includes: • Vacuum-Jacketed Cold End • Drive End with Krytox-packed Bearings (O2 safe) • Motor (TEFC frame) • Surge Chamber, stainless steel • Relief Valve set @ 3600/6000 PSI• Over-Pressure Safety Switch • Reference Pressure Gauge, 2-1/2” dial • Electrical Control Panel w/motor starter and hour meter • Drive Pulleys and 4 groove Belt with Belt Guard
CV PumpSpec Sheet
Installation and Training • Technical Assistance • Parts and Service
www.cryovation.com www.thecryoshop.com609.914.4792 [email protected] Mary Way Hainesport, NJ 08036
CV PumpSpec Sheet
Installation and Training • Technical Assistance • Parts and Service
www.cryovation.com www.thecryoshop.com609.914.4792 [email protected] Mary Way Hainesport, NJ 08036