spare parts list - boom · 2015. 3. 20. · 200/117 250/140. 3 contents page general information 2...

Spare Parts List - Boom

595-081-E2007-01-12

2

86/59

6.25 ± 0.75

120/62

143/76

171/94

200/117

250/140

Boom specifications

Extrusion dimensions

mm

14.0

24.8

39.4

67.7

112

185

Wy min.cm3

Wy min.3

Wy min.

± 10%

7.8

13.7

20.9

35.7

55.5

91.4

Wx min.cm3

± 10%

1.67

2.16

2.83

4.03

5.36

6.96

Weightkg/m+ 20%– 0%

4.0 ± 1.0

5.5 ± 0.75

Sailgroove

mm

16x4

25x6

25x6

25x6

32x8

32x8

LowerT-track

Dimensionsmm

2*

2+1 flattening** reef

3**

3**

4**

4**

No. ofReefing

lines

ø8

ø10

ø10

ø12

ø12

ø14

Size ofreefinglinesmm

1:3

1:3

1:3

1:4

1:4

1:4

Internalouthaul

ratio***

* 86/59 can not be fitted with ”Single-Line Reefing”

** Maximum two ”Single-Line Reefs” can be fitted. Further reefs must be with Running Hooks.

*** Conventional Outhaul

Seldén Mast AB reserves the right to alter the design or specification without prior warning, to allow unrestricted future product development.

General informationBoom equipment can vary from boat to boat. This Part List does not list the variations, but gives the maximumquantities that each boom end-fitting can be fitted with for each part number. The boom end-fittings can thus easily be fitted withsupplementary parts at a later date. Because the same sparepartsdrawing is used for all gooseneck end-fittings or for all outboardend-fittings, more items are often shown on the drawing than canactually be fitted.

Nor are the spares drawings necessarily identical to the parts listed.

”Inboard and Outboard boom end” have numbers and letters marked at most of the sheave slots.The spare parts tables refer to these markings (”Pos”.) for sheaves and stoppers as they can have different dimensions even if on the same end-fitting.

Extrusion dimensions

mmA

89 15

1014

15

16

20

18

20

20

20

30

30

12

12

16

16

Dimensions inboard boom end

W ØD

W

ØD

A

86/59

120/62

143/76

171/94

200/117

250/140

3

ContentsPage

General information 2

Table of booms 2

Spare parts inboard and outboard ends 86/59 & 120/62 4-5 143/76 & 171/94 6-7 200/117 & 250/140 8-9

Outhauls Conventional outhaul 10-11In-mast furling outhaul 10-11Cars 10-11

Page

Sliders Mainsheet sliders 12-13Kicker sliders 12-13

Single line reef 14-15

Reef line knot

IMPORTANT!

The reefing line is tied as illustrated, with a bowlineand running noose.No. 1 reef is shown. Note that grommets are required along the foot for each reef.

4

–1

2

4

4

–

–

5

5

6

7

7

8

9

10

11

12

13

13

13

14

15

16

17

17

17

17

17

17

21

22

23

24

25

27

28

32

32

33

34

35

36

Inboard boom end fitting

Clevis pin

Split pin

Split ring

Pin

Split pin

Pin

Clevis pin

Washer

Circular clip

Split pin

Separator

Sheave

Sheave (spacer)

Pin

Washer

Circular clip

Pin

Split pin

Jam lever

Flange bushing

Spring

Plug - White

Plug - Blue

Plug - Red

Plug - Yellow

Plug - Green

Plug - Black

Pin

Washer

Circular clip

Sheave

Clevis pin

Split pin

Sheave

Poprivet LD 850

Poprivet LD 650

Plug

Plug

Plug

Plug

85/58, 86/59

ø8x36

–

ø20x1,5

ø5x40

ø2x10

–

ø8x63

ø17/8-2

–

ø2,5x12

–

ø45/8-13

ø70/12-16

ø10x66

ø20/10-0,8

–

ø3x18

ø2,5x12

13x105

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

ø4,8x12,7

ø12/4,5-11

ø14/8-12

–

–

1

1

–

1

13)

2

–

1

11)

–

1

–

2

1

1

11)

–

1

1

2

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

4

2

2

–

–

509-013

165-107

–

301-015

166-083

301-046

–

165-118

164-002

–

301-047

–

504-320

504-332

166-084

164-028

–

166-046

301-047

511-062-01

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

167-018

319-595

319-596

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

Inboard boom end

Item Description Dimension Qty Part no. Pos.

Boom dimension: 86/59

120/62

ø10x50

ø2,9x16

–

–

–

ø10x72

–

ø20/10-0,8

ø12/9

–

44x150x2

ø45/10-11

–

ø10x72

ø20x10-0,8

ø12/9

–

–

11x120

ø15/12/10-5,5

ø1,8/Dy15/L8/N4,13

ø8

ø8

ø8

ø8

ø8

ø8

ø10x66

ø20/10-0,8

ø12/9

ø38/10-11

ø8x27

ø2,5x12

ø28x8-13

ø6,4x12,7

–

ø14/8-12

ø14/8-12

ø14/8-12

ø12/4,5-11

1

1

1

–

–

–

1

–

21)

2

–

2

4

–

1

21)

2

–

–

4

8

4

1

1

1

1

1

1

1

21)

2

2

1

1

1

4

–

2

2

2

2

509-025

165-206

301-049

–

–

–

166-326

–

164-028

301-073

–

537-152

504-504

–

166-326

164-028

301-073

–

–

511-074

306-327

308-062

319-529

319-530

319-531

319-532

319-533

319-534

166-325

164-028

301-073

504-505

165-113

301-047

504-319

167-004

–

319-596

319-596

319-596

319-596

–

–

–

–

–

–

–

–

–

–

–

0,1,2,F

–

–

–

–

–

–

0,1,2,F

–

–

–

–

–

–

–

–

–

–

–2)

–

–

–

–

–

–

–

–

–

Dimension Qty Part no. Pos.

120/62

2)

1) Plastic washers are only intended as spacers to fill out possible gaps between locking rings and fittings. Correct quantities cannot therefore be specified. The table shows the recommended quantity of plastic washers when retro-fitting.

Only two outer sheave slots of the three on the upper face on the outboard end-fitting should be used for luff reefing arrangements.

3) Fastening for outhaul block.

–

5

Screw

Sheave

40

41

41

42

43

43

44

Outboard boom end fitting

Pin

Clevis pin

Washer

Circular clip

Split pin

86/59

–

ø8/55

–

ø2,5x12

ø45/8-13

1

–

1

–

1

2

500-010

–

165-119

–

301-047

504-320

–

–

–

–

–

–

Outboard boom end



120/62

ø10x66

–

ø20/10-0,8

ø12/9

–

ø45/10-11

1

1

–

11)

2

–

3

500-021

166-325

–

164-028

301-073

–

504-504

–

–

–

–

–

0,1,2

Sheave45 ø28/8-5,5 1 504-023-01 – ø38/10-11 1 504-505 –

46 MRX-6x12 2 155-613 – MRX 6x12 2 155-613 –


120/62

47

48

Clevis pin

Split pin

–

–

–

–

–

–

–

–

ø5x28

ø2x10

1

1

165-601

301-046

–

–

1) Plastic washers are only intended as spacers to fill out possible gaps between locking rings and fittings. Correct quantities cannot therefore be specified. The table shows the recommended quantity of plastic washers when retro-fitting.

42

4344

4544

4748

32

28

36

2527

26

23 2224

21

22

35

23

12

11 13

34

33

2

7

6

5

1

3

4

10

9

8

15

17

14

1614

16

46 31

29

37

30

2018

13

12

43

42

41

40

1)

6

–

–

1

2

3

4

5

6

7

8

9

11

12

13

14

15

16

17

17

17

17

17

17

21

22

23

24

25

26

27

28

29

31

32 b

33

34

35

36

37


Clevis pin

Washer

Split pin

Pin*

Washer

Circular clip

Separator

Sheave

Pin*

Washer

Circular clip

Jam lever

Flange bushing

Spring

Plug - White

Plug - Blue

Plug - Red

Plug - Yellow

Plug - Green

Plug - Black

Pin*

Washer

Circular clip

Sheave

Clevis pin

Washer

Split pin

Sheave

Clevis pin

Split pin

Poprivet LD 870

Plug

Plug

Plug

Plug

Plug

143/76

ø12x61

ø24/13-2,5

ø4x18

ø10x82,5

ø20/10-0,8

ø12/9

44x159x2

ø45/10-13

ø12x82

ø20/12,2-0,5

ø14/11

13x150

ø18/14/12-6,5

ø1,8/Dy15/L8/N4,13

ø8

ø8

ø8

ø8

ø8

ø8

ø10x82,5

ø20/10-0,8

ø12/9

ø38/10-11

ø10x28

ø20/10-2

ø2,5x16

ø38/10-11

–

–

ø6,4x17,8 4)

ø14/8-12

ø15/9,5-12

ø14/8-12

ø14/8

1

1

1

1

1

21)

2

2

4

1

21)

2

4

8

4

1

1

1

1

1

1

1

21)

2

2

1

1

1

1

–

–

4

2

2

2

2

–

509-017

166-2578)9)

164-404

301-061

166-3135)

164-028

301-073

537-151

504-321

166-3126)

164-025

301-070

511-072

306-326

308-062

319-529

319-530

319-531

319-532

319-533

319-534

166-3137)

164-028

301-073

504-505

165-203

164-004

301-048

504-505

–

–

167-002

319-596

319-597

319-596

319-596

–

–

–

–

–

–

–

–

–

0,1,2,3

–

–

–

0,1,2,3

–

–

–

–

–

–

–

–

–

–

–2)

–

–

–

–

–

–

–

–

–

–

–

–

Inboard boom end



171/94

ø12x61

ø24/13-2,5

ø4x18

ø12x98,5

ø20/12,2-0,5

ø14/11

–

ø57/12-13

ø12x98,5

ø20x12,2-0,5

ø14/11

13x150

ø18/14/12-6,5

ø1,8/Dy15/L8/N4,13

ø8

ø8

ø8

ø8

ø8

ø8

ø10x93,5

ø20/10-0,8

ø12/9

ø45/10-13

ø10x28

–

ø2,5x16

ø38/10-11

ø10x28

ø2,5x16

ø15/9,5-12

ø15/9,5-12

ø14/8-12

ø14/8

ø14/8

1

1

1

1

1

21)

2

–

4

1

21)

2

4

8

4

1

1

1

1

1

1

1

21)

2

2

1

–

1

1

1

1

2

2

2

2

2

509-018

166-2578)9)

164-404

301-061

166-3085)

164-025

301-070

–

504-324

166-3086)

164-025

301-070

511-072

306-326

308-062

319-529

319-530

319-531

319-532

319-533

319-534

166-3097)

164-028

301-073

504-321

165-203

–

301-048

504-505

165-203

301-048

32 a Poprivet LD 850 ø6,4x12,7 3) 2 167-004 – ø6,4x12,7 6 167-004

319-597

319-597

319-596

319-596

319-596

–

–

–

–

–

–

–

0,1,2,3

–

–

–

0,1,2,3

–

–

–

–

–

–

–

–

–2)

–

–

–

–

–

–

–

– – – –

–

–

–

–

–


171/94

2)

3)

4)

5)

6)

7)

8)

9)

Plastic washers are only intended as spacers to fill out possible gaps between locking rings and fittings. Correct quantities cannot therefore be specified. The table shows the recommended quantity of plastic washers when retro-fitting.


Upper flanges

Lower flanges

Also as a package 5 + 49 1 166-313-01 - - 1 166-308-01 -

Also as a package 11 + 49 1 166-312-01 - - 1 166-308-01 -

Also as a package 21 + 49 1 166-313-01 - - 1 166-309-01 -

Also as a package 2 + 49 1 166-257-01 - - 1 166-257-01 -

Booms made before 2003 use article number 165-413

Also as a package 5 + 49 1 166-313-01 - - 1 166-308-01 -

Also as a package 11 + 49 1 166-312-01 - - 1 166-308-01 -

Also as a package 21 + 49 1 166-313-01 - - 1 166-309-01 -

Also as a package 2 + 49 1 166-257-01 - - 1 166-257-01 -

Also as a package 5 + 49 1 166-313-01 - - 1 166-308-01 -

Also as a package 11 + 49 1 166-312-01 - - 1 166-308-01 -

Also as a package 21 + 49 1 166-313-01 - - 1 166-309-01 -

Also as a package 2 + 49 1 166-257-01 - - 1 166-257-01 -

Also as a package 5 + 49 1 166-313-01 - - 1 166-308-01 -

Also as a package 11 + 49 1 166-312-01 - - 1 166-308-01 -

Also as a package 21 + 49 1 166-313-01 - - 1 166-309-01 -

Also as a package 2 + 49 1 166-257-01 - - 1 166-257-01 -

Also as a package 5 + 49 1 166-313-01 - - 1 166-308-01 -

Also as a package 11 + 49 1 166-312-01 - - 1 166-308-01 -

Also as a package 21 + 49 1 166-313-01 - - 1 166-309-01 -

Also as a package 2 + 49 1 166-257-01 - - 1 166-257-01 -

Also as a package 5 + 49 1 166-313-01 - - 1 166-308-01 -

Also as a package 11 + 49 1 166-312-01 - - 1 166-308-01 -

Also as a package 21 + 49 1 166-313-01 - - 1 166-309-01 -

Also as a package 2 + 49 1 166-257-01 - - 1 166-257-01 -

Also as a package 5 + 49 1 166-313-01 - - 1 166-308-01 -

Also as a package 11 + 49 1 166-312-01 - - 1 166-308-01 -

Also as a package 21 + 49 1 166-313-01 - - 1 166-309-01 -

Also as a package 2 + 49 1 166-257-01 - - 1 166-257-01 -

Also as a package 5 + 49 1 166-313-01 - - 1 166-308-01 -

Also as a package 11 + 49 1 166-312-01 - - 1 166-308-01 -

Also as a package 21 + 49 1 166-313-01 - - 1 166-309-01 -

Also as a package 2 + 49 1 166-257-01 - - 1 166-257-01 -

* For inboard casting without locking pin recess (before 2003) see separate table on page 7.

Split pin

Locking pin

7

40

Screw

41

42

43

44

45

46


Pin*

Washer

Circular clip

Sheave

Sheave

143/76

ø10x82,5

ø20/10-0,8

ø12/9

ø45/10-11

ø38/10-11

MRX 6x12

1

1

21)

2

4

1

4

500-019

166-3132)

164-028

301-073

504-504

504-505

155-613

–

–

–

–

1,2,3,4

0

–

Outboard boom end



174/94

ø12x98,5

ø20/10-0,8

ø14/11

ø70/12-13

ø57/12-13

MRX 6x12

1

1

21)

2

4

1

4

500-016

166-3082)

164-028

301-070

504-326

504-324

155-613

–

–

–

–

1,2,3,4

0

–


171/94

47

48

Clevis pin ø5x41

ø2x10

1

1

165-604

301-046

–

–

ø5x41

ø2x10

1

1

165-604

301-046

–

–

49 ø4x11 1 166-259 – ø4x11 1 166-259 –

4243

44

45

4447 48

32

28

36

2527

26

23 2224

21

22

35

23

12

49

11 13

34

33

2

7

6

5

491

3

4

9

8

15

17

14

1614

16

46 31

29

37

30

201813

12

43

42

4149

40

1)

2)

Plastic washers are only intended as spacers to fill out possible gaps between locking rings and fittings. Correct quantities can-not therefore be specified. The table shows the recommended quantity of plastic washers when retro-fitting.

Also as a package 41 + 49 1 166-313-01 - - 1 166-308-01 - Also as a package 41 + 49 1 166-313-01 - - 1 166-308-01 - Also as a package 41 + 49 1 166-313-01 - - 1 166-308-01 - Also as a package 41 + 49 1 166-313-01 - - 1 166-308-01 - Also as a package 41 + 49 1 166-313-01 - - 1 166-308-01 - Also as a package 41 + 49 1 166-313-01 - - 1 166-308-01 - Also as a package 41 + 49 1 166-313-01 - - 1 166-308-01 - Also as a package 41 + 49 1 166-313-01 - - 1 166-308-01 -


10

Boom 143/76 Boom 171/94

Item Part no. Part no.

5 Package for replacement 166-313-02 166-308-02














Boom 143/76 Boom 171/94






For inboard casting without locking pin recess (before 2003)

Also as a package 5 or 11 + 49 1 166-304-01 - - 1 166-322-01 -

Also as a package 21 + 49 1 166-305-01 - - 1 166-301-01 -

Also as a package 2 + 50 1 166-256-01 - - 1 166-256-01 -

Booms made before 2003 use article number 165-559

8

–1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

17

17

17

17

17

18

20

21

22

23

24

25

26

27

28

29

30

30

31

32

33

34

35

36

37


Clevis pin

Washer

Split pin

Pin*

Washer

Circular clip

Separator

Sheave

Sheave

Pin*

Washer

Circular clip

Jam lever

Flange bushing

Spring

Plug – White

Plug – Blue

Plug – Red

Plug – Yellow

Plug – Green

Plug – Black

Jam lever

Spring

Pin*

Washer

Circular clip

Sheave

Clevis pin

Washer

Split pin

Sheave

Clevis pin

Washer

Washer

Split pin

Poprivet LD 870

Plug

Plug

Plug

Plug

Plug

200/117

ø16x76

ø30/17-3

ø5x28

ø14x124

ø20/14-1

ø16/13

225x63x2

ø70/14-16

ø70/14-13

ø14x124

ø20/14-1

ø16/13

16x190

ø24/20/14-7,5

ø2/Dy17,2/L8/N4,13

ø8

ø8

ø8

ø8

ø8

ø8

13x150

ø1,8/Dy15/L8/N4,13

ø12x112

ø20/12,2-0,5

ø14/11

ø45/12-16

ø10x32

ø20/10-0,8

ø2,5x16

ø45/10-13

ø10x32

ø20/10-2

ø20/10-0,8

ø2,5x16

ø6,4x17,8

ø18/12-12

ø18/12-12

ø15/9,5-12

ø14/8-12

ø14/8-12

1

1

1

1

1

21)

2

2

4

1

1

21)

2

4

8

4

1

1

1

1

1

1

1

1

1

21)

2

2

1

11)

1

1

1

1

11)

1

8

2

2

2

2

2

509-019

166-2565)6)

164-410

301-054

166-3043)

164-026

301-071

537-150

504-333

504-327

166-3043)

164-026

301-071

511-071

306-325

308-061

319-529

319-530

319-531

319-532

319-533

319-534

511-072

308-062

166-3054)

164-025

301-070

504-502

165-205

164-028

301-048

504-321

165-205

164-004

164-028

301-048

167-002

319-598

319-598

319-597

319-596

319-596

–

–

–

–

–

–

–

–

0,1,2,3,4

0

–

–

–

0,1,2,3,4

–

–

–

–

–

–

–

–

0

–

–

–

–2)

–

–

–

–

–

–

–

–

–

–

–

–

–

–

Inboard boom end



250/140

ø16x76

ø30/17-3

ø5x28

ø14x142

ø20/14-1

ø16/13

–

ø70/14-16

–

ø14x142

ø20/14-1

ø16/13

16x190

ø24/20/14-7,5

ø2/Dy17,2/L8/N4,13

ø8

ø8

ø8

ø8

ø8

ø8

–

–

ø14x130

ø20/14-1

ø16/13

ø70/14-16

ø10x35

ø20/10-0,8

ø2,5x16

ø57/10-13

ø10x32

–

ø20/10-0,8

ø2,5x16

ø6,4x17,8

ø18/12-12

ø18/12-12

ø18/12-12

ø14/8-12

ø14/8-12

1

1

1

1

1

21)

2

–

5

–

1

21)

2

5

10

5

1

1

1

1

1

1

–

–

1

21)

2

2

1

11)

1

1

1

–

11)

1

12

2

2

2

2

2

509-020

166-2565)6)

164-410

301-054

166-3223)

164-026

301-071

–

504-333

–

166-3223)

164-026

301-071

511-071

306-325

308-061

319-529

319-530

319-531

319-532

319-533

319-534

–

–

166-3014)

164-026

301-071

504-333

165-221

164-028

301-048

504-323

165-205

–

164-028

301-048

167-002

319-598

319-598

319-598

319-596

319-596

–

–

–

–

–

–

–

0,1,2,3,4

–

–

–

-

0,1,2,3,4

–

–

–

–

–

–

–

–

–

–

–

–

–2)

–

–

––

–

–

–

–

–

–

–

–

–

–


250/140

1)

2)

3)

4)

5)

6)




Also as a package 21 + 49 1 166-305-01 - - 1 166-301-01 -

Also as a package 2 + 50 1 166-256-01 - - 1 166-256-01 -


Also as a package 21 + 49 1 166-305-01 - - 1 166-301-01 -

Also as a package 2 + 50 1 166-256-01 - - 1 166-256-01 -


Also as a package 21 + 49 1 166-305-01 - - 1 166-301-01 -

Also as a package 2 + 50 1 166-256-01 - - 1 166-256-01 -


Also as a package 21 + 49 1 166-305-01 - - 1 166-301-01 -

Also as a package 2 + 50 1 166-256-01 - - 1 166-256-01 -


Also as a package 21 + 49 1 166-305-01 - - 1 166-301-01 -

Also as a package 2 + 50 1 166-256-01 - - 1 166-256-01 -


Also as a package 21 + 49 1 166-305-01 - - 1 166-301-01 -

Also as a package 2 + 50 1 166-256-01 - - 1 166-256-01 -


Also as a package 21 + 49 1 166-305-01 - - 1 166-301-01 -

Also as a package 2 + 50 1 166-256-01 - - 1 166-256-01 -


47

250/140

9

Screw

40

41

42

43

44

45

46


Pin*

Washer

Circular clip

Sheave

Sheave

200/117

ø14x118

ø20/14-1

ø16/13

ø70/14-16

ø57/14-13

MRX 6x12

1

1

21)

2

4

1

4

500-017

166-3072)

164-026

301-071

504-333

504-348

155-613

–

–

–

–

1,2,3,4

0

–

Outboard boom end



250/140

ø14x142

ø20/14-1

ø16/13

ø90/14-16

–

MRX 6x12

1

1

21)

2

5

–

4

500-018

166-3222)

164-026

301-071

504-336

–

155-613

–

–

–

–

0,1,2,3,4

–

–


48

Clevis pin

Split pin

ø5x41

ø2x10

1

1

165-604

301-046

–

–

ø5x41

ø2x10

1

1

165-604

301-046

–

–

49 Locking pin ø4x11 1 166-259 – ø 4x11 1 166-259 –

50 Locking pin ø5x16 1 166-258 – ø5x 16 1 166-258 –

4243

44

45

4447 48

32

28

36

2527

26

23 2224

21

22

35

23

12

49

11 13

34

33

2

7

6

5

501

3

4

9

8

15

17

14

1614

16

46 31

29

37

30

201813

12

43

42

4149

40

10

1)

2)


Also as a package 41 + 49 1 166-307-01 - - 1 166-322-01 - Also as a package 41 + 49 1 166-307-01 - - 1 166-322-01 - Also as a package 41 + 49 1 166-307-01 - - 1 166-322-01 - Also as a package 41 + 49 1 166-307-01 - - 1 166-322-01 - Also as a package 41 + 49 1 166-307-01 - - 1 166-322-01 - Also as a package 41 + 49 1 166-307-01 - - 1 166-322-01 - Also as a package 41 + 49 1 166-307-01 - - 1 166-322-01 - Also as a package 41 + 49 1 166-307-01 - - 1 166-322-01 -


Boom 200/117 Boom 250140







5 Package for replacement





Boom 200/117 Boom 250140


For inboard casting without locking pin recess (before 2003)

1

–

4)

10

In-m

ast

furl

ing

Out

haul

–

B7

Block – single

In-m

ast

furl

ing

Out

haul

A3

A4

A5

A6

A7

A9

A10

– Outhaul slider T=4/5,5 1 511-519

–

–

–

307-001

602-001

319-508

–

–

–

11)

1

–

–

–

5x15x34

ø3-7x19

13/9,5/4/10

– – –

A1 Outhaul car ”4” – – – 66x46x2,5 1 507-519

166-144

504-345

530-713

307-026

602-002

–

2

4

1

11)

–

ø8x16

ø19/8-8

70x14x9

M8x16x35

ø4-7x19

–

A2 Pin

A3 Wheel

A4 Sliding Strip

A6

– Recommended wire size

–

–

–

–

A1

A2

Flange bushing

611-005–ø8 Braid line 611-005–ø10 Braid lineRecommended line size

538-5021HA 93 538-2111R312Internal becket block

538-5011HA 165 ––Block – fiddle/cleat 3)

––– 507-519166x46x2,5Outhaul car ”4”

––– 166-1442ø8x16Pin

––– 504-3454ø19/8-8Wheel

––– 530-713170x14x9Sliding Strip

––– 308-0741ø2,25/Dy36,5-26/L70Spring

––– 307-020–M6x13x25Shackle dito

––– 611-009–ø10 Braid lineRecommended line size

––– 538-9821R 311Block – single

–– 538-9231R 501

Outhaul

Item Description Dimension Qty Part no. Dimension Qty Part no.

Boom dimension: 86/59 Boom dimension: 120/62

Co

nven

tio

nal O

utha

ul

Shackle

B8

A2 Pin ø8x20 2 166-072

504-500

307-026

602-002

611-009

538-927

511-802

4

14)

–

1

1

ø27,5/8,2-9,3

M8x16x35

ø4-7x19

ø10 Braid line

R 502 (single becket block)

75x50

ø8x20 2 166-072

A1 Outhaul car ”4” 74x52x4 1 507-569 74x52x4 1 507-569

504-500

307-024

602-002

611-009

538-927

511-802

4

14)

–

1

1

ø27,5/8,2-9,3

M10x19x38

ø4-7x19

ø10 Braid line

R 521 (fiddle block)

75x50

A3 Wheel

A6 Shackle


–

– Internal block

B1

B2

B3

B4

B5

B6

Outhaul ca ”4+2”

504-5004ø27,5/8,2-9,3 504-5004ø27,5/8,2-9,3Wheel (Vertical)

504-5012ø25,3/8-6,5 504-5012ø25,3/8-6,5Wheel (Horizontal)

308-0741ø2,25/Dy36,5-26/L70 308-0741ø2,25/Dy36,5-26/L70Spring


307-0201M6x13x25 307-0201M6x13x25Shackle dito

538-9231R 501 538-9231R 501Block – single

538-9001R 601 538-9001R 601Block – single

B9 319-7231ø70/18-20 319-723ø70/18-20Doughnut



Co

nven

tio

nal O

utha

ul

Recommended line size

1) L= Extrusion length – 350 mm.

3) To be assembled at the inboard end.

L= Extrusion length – 300 mm.

5) If the main sheet is attached more than 1,5 m from the outboard boom end, two sliders are recommended to distribute the main sheet load.

ø70/18-20

11

In-m

ast

furl

ing

504-500

B7

C2 Wheel ø27,5/8,2-9,3 6 504-500

307-024

602-003

611-009

538-905

511-803

504-500

14)

–

1

1

6

M10x19x38

ø5-7x19

ø10 Braid line

R 621

132x60

ø27,5/8,2-9,3

ø27,5/8,2-9,3 6 504-500

C1 Outhaul car ”6” 90x54 1 511-570 90x54 1 511-570

307-024

602-003

611-009

538-905

511-803

14)

–

1

1

6

M10x19x38

ø5-7x19

ø10 Braid line

R 621

132x60

ø27,5/8,2-9,3

C3 Shackle


– Recommended line size

–

B1 Outhaul car ”6+4”

B2

B3

B4

B5

B6

B8

Wheel (Vertical)

504-5014ø25,3/7,95-6,5 504-5014ø27,3/7,95-6,5Wheel (Horizontal)

308-0741ø2,5/Dy 36,5-26/L70 308-0741ø2,5/Dy36,5-26/L70Spring


307-0211M8x16x32 307-0211M8x16x32Shackle dito

538-9001R 601 538-9001R 601Block – single

538-9501R 801 538-9501R 801Block – single

B9 319-7231 319-7231ø70/18-20Doughnut

Outhaul



Co

nven

tio

nal

Internal fiddle block

4)


3) To be assembled at the inboard end.



A4

A3

A5

A2

A1

A10

A3

A6

A9

B7

B6

B2

B8

B9B1

B3

B2

B3

B4

C2

C3

C2

C1

MC6S 10x16

MC6S 8x16

–

3)

12

E1

F1

F1

Nut

Rodkicker slider T16-126 1 511-556 – – –

E2 Poprivet LD 850 Ø6,4x12,7 2 167-004 – – –

F1 Main sheet slider – – – T25-82 15) 511-571

F2 Screw – – – MRX 6x12 2 155-613

G1 Kicker slider – – – T25-140 1 511-800

G2 Screw – – – MC6S 8x16 3 153-006

H1 Main sheet/Kicker slider T16 15) 511-555 – – –

H2 Washer ø24/13-2,5 1 164-404 – – –

H3 Screw MFX 5x16 2 162-029 – – –

H4 M5 2 157-002 – –



Sliders

Main sheet slider T25-82 15) 511-571 T25-82 15) 511-571

F2 Screw MRX 6x12 2 155-613 MRX 6x12 2 155-613

G1 Kicker slider T25-140 1 511-800 T25-140 1 511-800

G2 Screw MC6S 8x16 3 153-006 3 153-006


Boom dimension: 143/76 171/94

Main sheet slider T32-98 15) 511-572 T32-98 15) 511-572

F2 Screw MC6S 8x16 2 153-006 MC6S 8x16 2 153-006

G1 Kicker slider T32-180 1 511-801 T32-180 x 511-801

G2 Screw MC6S 10x16 3 153-011 3 153-011


Boom dimension: 200/117 250/140

4)


To be assembled at the inboard end.



13

E2 E1

F1

F2

G1

G2

H1

H4

H2

H3

Replace block shackle K13 with K14.2)

14

Po

rtsi

de

Circlip

K1 Block – Starboard 120x109 1 538-851

Single line reef is not available for 86/59




504-346504-504166-342301-073

611-011611-011-92

4124

1

ø14/8-8,5ø45/10-11ø10x19,5ø12/9

ø10

K2 WheelK3 SheaveK5 PinK7

K10Braid line – Blue Eye, Braid line

K11K12K13

319-5601ø19/6-60Heat shrink307-0201M6x13x25Shackle538-9821R 311Block

538-8521120x109504-3464ø14/8-8,5504-5041ø45/10-11166-3422ø10x19,5301-0734ø12/9

611-010611-010-92

1ø10

319-5601ø19/6-60307-0201M6x13x25538-9821R311

K15 611-0111ø10Braid line – Blue

K9 Block – PortsideK2 WheelK3 SheaveK5 PinK7 Circlip

K10Braid line – Red Eye, Braid line

K11 Heat shrinkK12 ShackleK13 Block

611-0101ø10K15 Braid line – Blue

Single line reef

Item Description Dimension Qty Part no.


Sta

rbo

ard

Assembly number 538-851-01


Block shackle K13 can also be used.1)

ø12

Braid line – Blue Eye, Braid line

Sta

rbo

ard

Braid line – Red Eye, Braid line

Split pin

K15

K1 Block – Starboard 140x120 1 538-853 175x160 1 538-855

175x160 1 538-856504-3464ø14/8-8,5

504-3464ø14/8-8,5 504-3464ø14/8-8,5K2 Wheel504-3241ø57/12-13 504-3331ø70/14-16K3 Sheave

306-5441306-5431ø12/10-14,5 ø14/10-17,5K4 Bushing

K9 Block – PortsideK2 Wheel

––– 164-0042ø20/10-2K6 Washer301-0482ø2,5x16 301-04822,5x16K7 Split pin

319-5601ø19/6-60K11K12K13K14K15

Heat shrink307-020 1)1M6x13x25Shackle538-923 2)1R 501Block307-010 2)1M5x15x24Shackle611-0111ø10

319-5601ø19/6-80307-020 1)1M6x13x25538-900 2)1R 601307-020 2)1M6x13x25611-0151ø12Braid line – Blue

611-011611-011-92

1ø10611-015

611-015-921ø12K10




140-120 1 538-854504-3464ø14/8-8,5

504-3331ø70/14-16K3 Sheave 504-3241ø57/12-13306-5441ø14/10-17,5K4 Bushing 306-5431ø12/10-14,5165-2032ø10x28K5 Clevis pin 165-2022ø10x22164-0042ø20/10-2K6 Washer –––301-04822,5x16K7 301-0482ø2,5x16

611-014611-014-92

1ø12K10611-010

611-010-921ø10

319-5601ø19/6-80K11 Heat shrink 319-5601ø19/6-60307-020 1)1M6x13x25K12 Shackle 307-020 1)1M6x13x25538-900 2)1R 601K13 Block 538-923 2)1R 501307-020 2)1M6x13x25K14 Shackle 307-010 2)1M5x15x24611-0141Braid line – Blue 611-0101ø10

Assembly number 538-854-01 Assembly number 538-856-01


165-2022ø10x22 165-2032ø10x28K5 Clevis pin

Po

rtsi

de

15

Braid line – Red Eye, Braid line

Sta

rbo

ard

611-018

K1 Block – Starboard 175-192 1 538-857

504-346

504-333

306-544

165-203

164-004

301-048

4

1

1

2

2

2

ø14/8-8,5

ø70/14-16

ø14/10-17,5

ø10x28

ø20/10-2

ø2,5x16

236x220 1 538-859

504-347

504-333

306-544

165-203

–

301-048

4

1

1

2

–

2

ø20/12-11,5

ø70/14-16

ø14/10-17,5

ø10x28

–

ø2,5x16

236x220 1 538-859

504-347

504-333

306-544

165-203

–

301-048

4

1

1

2

–

2

ø20/12-11,5

ø70/14-16

ø14/10-17,5

ø10x28

–

ø2,5x16

K2 Wheel

K3 Sheave

K4 Bushing

K9 Block – Portside

K2 Wheel

K3 Sheave

K4 Bushing

K5 Clevis pin

K6 Washer

K7 Split pin

K5

K6 Washer

K7 Split pin

319-5601ø19/6-80K11

K12

K13

K14

K15

Heat shrink

307-0211M8x16x32Shackle

538-9001R 601Block

307-0201M6x13x25Shakle

611-0151ø12

319-5601ø19/6-100

307-0211M8x16x32

538-9501R 801

307-0211M6x16x32

611-0191ø14Braid line – Blue

611-015611-015-92

1ø12611-019

611-019-921ø14

319-5601ø19/6-100

307-0211M8x16x32

538-9501R 801

307-0211M8x16x32

1ø14

611-018611-018-92

1ø14

K10Braid line – BlueEye, Braid line

319-5601ø19/6-80K11

K12

K13

K14

K15

Heat shrink


538-9001R 601Block


611-0101ø12Braid line – Red

611-014611-014-92

1ø12K10

Single line reef




175-192 1 538-858

504-346

504-333

306-544

165-203

164-004

301-048

4

1

1

2

2

2

ø14/8-8,5

ø70/14-16

ø14/10-17,5

ø10x28

ø20/10-2

ø2,5x16

Assembly number 538-858-01 Assembly number 538-859-01


Po

rtsi

de

Clevis pin

2)

1) Block shackle K11 can also be used.

Replace block shackle K11 with K12.

K5K15

K13K14

K4K2K3

K9

K6

K2

K12

K10

K11

K1

59

5-0

81

-E

Pri

nte

d i

n S

wed

en.

Seldén Mast AB, Sweden Tel +46 (0)31 69 69 00Fax +46 (0)31 29 71 37 e-mail [email protected]

Seldén Mast Limited, UK Tel +44 (0) 1329 504000Fax +44 (0) 1329 504049 e-mail [email protected]

Seldén Mast Inc., USA Tel +1 843-760-6278 Fax +1 843-760-1220 e-mail [email protected]

Seldén Mast A/S, DK Tel +45 39 18 44 00 Fax +45 39 27 17 00 e-mail [email protected]

Seldén Mid Europe B.V., NLTel +31 (0) 111-698 120Fax +31 (0) 111-698 130e-mail [email protected]

Seldén Mast SAS, FRTel +33 (0) 251 362 110Fax +33 (0) 251 362 185e-mail [email protected]

www.seldenmast.com

Dealer:

DINGHIESKEELBOATSYACHTS

The Seldén Group is the world’s leading manu-

facturer of masts and rigging systems in carbon

and aluminium for dinghies, keelboats and yachts.

The Group consists of Seldén Mast AB in Sweden,

Seldén Mast A/S in Denmark, Seldén Mast Ltd

in the UK, Seldén Mid Europe B.V. in the Nether-

lands, Seldén Mast SAS in France and Seldén

Mast Inc in the USA. Our well known brands

are Seldén and Furlex. The worldwide success of

Furlex has enabled us to build a network of over

750 authorised dealers covering the world’s mari-

ne markets. So wherever you sail, you can be sure

of fast access to our service,

spare parts and know-how.

spare parts list - boom · 2015. 3. 20. · 200/117 250/140. 3 contents page general information 2...

Documents