solving your need for greater filtration efficiency€¦ · catalyst recovery, removal of pipe...

Bag Filter Housings

Solving your need for greater filtration efficiency

Eaton manufactures bag filter housings and filter bags to global standards for industries around the world. In recent years, a number of changes have been made to the manufacturing process to raise the level of quality delivered to our customers.

The selection of single bag filter housings ranges from those suitable for exacting absolute filtration applications to high-quality housings designed, especially for cost-sensitive applications and everything in between. Multi-bag filter housings that accommodate up to 36 individual filter bags for flow rates of up to 6,341 GPM (1,440 m3/h) are available in a number of different designs.

Eaton is helping customers reduce process costs through its development of a unique line of proprietary filter bags and elements that offer a compelling, cost-effective alternative to more expensive filtration systems. Customers can choose from a complete line of single or multi-bag filter housings designed to meet the needs of the most demanding applications.

Eaton offers a full range of filter bags: more than 1,500 choices in all, from economically sewn filter bags for standard applications, to welded, multi-layered bags for more demanding applications.

For more information, please email us at [email protected] or visit www.eaton.com/filtration

© 2014 Eaton. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. All information and recommenda-tions appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the infor-mation herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.

North America 44 Apple Street Tinton Falls, NJ 07724Toll Free: 800 656-3344 (North America only)Tel: +1 732 212-4700

Europe/Africa/Middle East Auf der Heide 2 53947 Nettersheim, GermanyTel: +49 2486 809-0

Internormen Product Line Friedensstraße 41 68804 Altlußheim, GermanyTel: +49 6205 2094-0

Begerow Product LineAn den Nahewiesen 24 55450 Langenlonsheim, GermanyTel: +49 6704 204-0

ChinaNo. 3, Lane 280, Linhong Road Changning District, 200335 Shanghai, P.R. ChinaTel: +86 21 5200-0099

Singapore4 Loyang Lane #04-01/02 Singapore 508914Tel: +65 6825-1668

BrazilAv. Julia Gaioli, 474 – Bonsucesso 07251-500 – Guarulhos, BrazilTel: +55 11 2465-8822

8

Bag Filter Housings

AutomotiveFiltration of pre-treatment bath, filtration of e-coat, top coat and clear coat, primer, paint ring line filters, parts cleaning fluids, drawing compounds, lubricants, metal working fluids and pump intake filters.

ChemicalCatalyst recovery, removal of pipe scale, polishing of aqueous process fluids, alkalis, acids and solvents, filtration of emulsions and dispersions, gel removal from resins. Activated carbon or catalyst removal in the fine chemicals industry is a typical example of a demanding application in chemical processing. Eaton filter bags meet the application requirements for high-filtration efficiency, yet also offer long service life and reliability.

ElectronicsWafer and chip processing, electronic etching baths, photo-chemical polishing, and high-purity water filtration and pre-filtration of various membrane filtration processes to improve their cost-effectiveness. Eaton filter bags demons trate the required purity, efficiency and consistent performance.

Food and beverageFiltration of wine, spirits and beer, removal of particles from edible oils, removal of carbon black from cellulose, slime removal in gelatin, liquid sugar, thick juice, corn syrup polishing, starch processing, milk processing and soft drinks. Many Eaton filter bags conform to FDA and EEC food processing standards and can meet the unique and varied demands of these applications.

Metal workingFiltration of hydraulic oil, pre-treatment system filtration, precious metal recovery, metal working fluids and drawing compounds. Parts cleaning machines use our filter bags for minimizing residual dirt on parts.

Paint and lacquerRemoval of agglomerates, removal of paint coagulates, solvent filtration, removal of storage contaminants, filling lines, paint mixing lines and monomer purification.

PetrochemicalsFiltration of lube oils, fuel additives, enhanced oil recovery, filtration of amine solutions, filtration of glycol fluids, gas purification processes, distillation and cracking processes, amine washers, off-shore filter stations, oil drilling and injection fluids.

PharmaceuticalRecovery of expensive active ingredients, catalyst re covery, active carbon purification and removal, filtration of gelatin, hormones, vitamin extracts, polishing of herbal mixtures, protein removal from plasma, filtration of saline solutions.

Resins, plastics, inks and coatingsOil and polymer filtration, dispersions, polymerization batches, resins for can coatings, plastics compounding, printing ink, plastics processing, paper coatings, high-purity ink-jet fluid filtration.

Water treatmentWell water filtration, water treatment plants, silt removal, pipe scale removal, sand and algae removal from sea water, ion exchange resin recovery, calcium deposit removal, filtration of chemicals used for water treatment, dust removal from cooling tower installations. Surface water filtration is an area traditionally dominated by expensive cartridge filtration.

Applications

USEF-FBH-01

10-2014

Bag Filter Housings

World proven, cost-effective systemsfor bag filtration

PROLINE 100™ multi-bag filter housingsThe most competitively priced, 100 psi (6.9 bar), non-code housings that Eaton has to offer. Up to 8 filter bags per housing.

FLOWLINE II™ single bag filter housingsOne-piece body construction makes this the easy and economical choice for single bag filter housings.

MAXILINE™ multi-bag filter housingsHousings for high-volume applications demanding frequent filter bag change- outs. Up to 24 filter bags per housing.

ECOLINE™ single bag filter housingsLightweight design for commercial, OEM, non-hazardous, low pressure applications that do not requirea code stamp.

TOPLINE™ single bag filter housingsThe finest bag filter housing available. From its high- performance design to its investment-cast components.

POLYLINE™ single bag filter housingsRugged, all plastic housings meet the needs of ultra-pure or corrosive applications.

SIDELINE™ single bag filter housingsMid-priced housings are solid, investment-cast filters suitable for most applications.

MODULINE™ multi-bag filter housing systemContinuous filtration and larger flow rates in a flexible multi-bag filter housing system.

FLOWLINE™ single bag filter housingsVersatile, heavy-duty bag filter housings.

DUOLINE™ multi-bag filter housing systemContinuous filtration in a dual-housing configuration.










8

The revolutionary QIC-LOCK opening mechanism is the answer to users’ demands who work in an environment where productivity and safety are the key priorities.

• QIC-LOCK opening mechanism is safe to use. An interlock prevents opening until the housing is entirely vented.

• QIC-LOCK opening mechanism is simple and fast to operate. Standing in place, the operator can rotate the hand wheel and open the cover. There is no requirement to have full movement and access around the housing or use any tools as with conventional bolted closures.

• QIC-LOCK opening mechanism has a rugged design, precision machining assures long life and repeatable operation. A special coating protects the spindle surface from wear and corrosion. The design is approved for all pressure housing design codes.

• QIC-LOCK opening mechanism doesn’t just make life easier for operators; there are significant cost benefits to be realized with greatly reduced downtime and lower maintenance costs.

1. Filter element change necessary – open the safety interlock to ensure simultaneous pressure relief.

2. Rotate the spindle using the hand wheel to open the V-clamp into the end position.

3. Open the cover aided by spring-assisted mechanism.

4. Change filter element.

5. Close the cover.

6. Close the V-clamp by rotation of the spindle.

Fast

Simple

Efficient

Economical

Safe

User- friendly

Durable

�Low Maintenance

Cost-effective

High Productivity

7. Close the safety interlock and the housing is ready to go back on-line.

Open and close your multi-bag filter housing in 30 seconds or less

QIC-LOCK™ Opening Mechanism

USEF-FBH-02

10-2014

ECOLINE™ Single Bag Filter Housing

MINILINE EBF single bag filter housing (available in EMEA)

This single bag filter housing is a highly cost-effective solution for price-sensitive applications and features a handy V-clamp closure and threaded couplings. Units come standard with filter bag size 01 or 02 stainless steel restrainer baskets. Sizes 03 and 04 available in EMEA.

Eaton’s ECOLINE single

bag filter housing is

a light-weight design

for commercial,

OEM, non-hazardous,

low-pressure applica-

tions that do not require

a code stamp.

Lightweight, economical single bag filter housing for commercial applications

Features � Side inlet with evacuation cover prevents spillage of unfiltered liquid, allowing for clean and easy filter bag change-outs � V-clamp cover closure is easy to operate, allowing cover to be removed or closed quickly � Compression hold down creates 360 degree sealing between the filter bag and the bag filter housing � Designed with a 1/4” thread port on the lid for vent or gauge � Smooth, bead-blasted finish makes it easy to completely clean the interior

Options � Available in 316 stainless steel for high corrosion resistance. 304 stainless steel version available in EMEA � Adjustable mounting legs for simplified installation �Multiple I/O connections to suit application

Unique, internal body-to-basket O-ringseal prevents bypass and is easy tomaintain










8

Technical data

ModelsNo. of

filter bags SizeFlow rate1

GPM (m³/h)Max. pressure

psi (bar)Max. temp.

°F (°C)Housing volume

gal (l)Housing weight

lb (kg)I/O

connections

EBF-0101 1 1 88 (20) 100 (6) 250 (120) 4.1 (15.5) 25 (7.5) 2” thread

EBF-0102 1 2 176 (40) 100 (6) 250 (120) 7.1 (27.0) 38 (11.0) 2” thread

EBF-0103 1 3 26 (6) 150 (9) 250 (120) 0.8 (3.0) 9 (3.5) 1 1/2” thread

EBF-0104 1 4 53 (12) 150 (9) 250 (120) 1.2 (4.5) 11 (4.5) 1 1/2” thread 1 Maximum theoretical flow based on water viscosity, filter bag specific. 2 Depending on seal material. Metric measures represent comparable products produced for EMEA and may not be an exact conversion from inches.

ECOLINE Single Bag Filter Housing

Dimensions - inch (mm)

Models A B C D E

EBF-0101 22.88 (581) 7.68 (195) 19.64 (489) 5.37 (150) 37.00 (940)

EBF-0102 38.50 (977) 7.68 (195) 35.19 (884) 5.37 (150) 68.00 (1,727)

EBF-0103 14.56 (370) 4.50 (114) 11.81 (295) 3.50 (110) 24.00 (609)

EBF-0104 20.69 (525) 4.50 (114) 17.87 (454) 3.50 (110) 34.50 (876) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversion from inches.

ApplicationsCoarse filtration > 500 µm ✓

Medium filtration > 10 µm Fine filtration < 10 µm

Pre-filtration ✓

Safety filtration High volumeBatch filtration Circuit filtration Continuous filtration

Solvents, paints Fats and oils Catalyst, activated carbon Acids, bases Petrochemicals Water, waste water ✓

Chemical industry Pharmaceuticals Metal cleaning ✓

Automotive Electronics Food and beverage Paint and lacquer Water treatment ✓

Galvanic industry

E

C A

D

B

USEF-FBH-14

10-2014

This single bag filter housing’s lightweight but robust construction incorporates valuable features that heavy-duty applications demand. Units come standard with filter bag size 01 or 02 stainless steel restrainer baskets.

Features � Side inlet with evacuation cover prevents spillage of unfiltered liquid, allowing for clean and easy filter bag change-outs � Easy open cover features integral handle, 1/4” vent and gauge ports and “no tools” eye-bolt closures � Cover opening direction easily adapts to different piping layouts and adjusts in the field to accommodate walls, posts or other obstructions

Eaton’s FLOWLINE

single bag filter housing

is a versatile, heavy-duty,

cost-effective bag filter

housing and the best

choice for industrial,

commercial and OEM

applications that do not

require a code stamp.

Lightweight, cost- effective single bag filter housing meets a wide range of applications

FLOWLINE™ Single Bag Filter Housing

Ergonomic, integral cover handle is easy to open and close

Compression bag hold down creates 360 degree sealing between filter bag and bag filter housing

Options � Available in 316 stainless steel for high corrosion resistance or carbon steel. 316 Ti stainless steel version available in EMEA � Buna-N® O-rings for the cover are standard. EPDM or Viton® seals and gaskets are available �Multiple I/O connections to suit application

Viton® is a registered trademark of E. I. du Pont de Nemours and company.

� Fabricated construction provides a cost-effective, lighter weight alternative to cast bag filter housings � Adjustable mounting legs for simplified installation � Ergonomic, integral cover handle is easy to open � Smooth, bead-blasted finish, coupled with a minimum number of welds makes it easy to completely clean the interior � Standard design available with threaded or flanged connections










8

FLOWLINE Single Bag Filter Housing



Pre-filtration ✓

Safety filtration High volumeBatch filtration ✓

Circuit filtration Continuous filtration




Galvanic industry

G

E C

A

D

B

F

Technical data

ModelsNo. of



psi (bar)Max. temp.



lb (kg)I/O

connections

FBF-0101 1 01 88 (20) 150 (10) 250 (120) 4 (15.5) 30 (13.6) 2” thread

FBF-0102 1 02 176 (40) 150 (10) 250 (120) 7 (27.0) 43 (19.5) 2” thread

FBF-0101 1 01 88 (20) 150 (10) 250 (120) 4 (15.5) 40 (21.5) 2” flange

FBF-0102 1 02 176 (40) 150 (10) 250 (120) 7 (27.0) 53 (27.0) 2” flange

FBF-0102* 1 02 176 (40) 150 (10) 250 (120) 7 (27.0) 61 (27.6) 3” flange 1 Maximum theoretical flow based on water viscosity, filter bag specific. Metric measures represent comparable products produced for EMEA and may not be an exact conversions. * Available in the US only.


Models A B C D E F G

FBF-0101 5.37 (136) 19.64 (499) 26.38 (670) 10.42 (265) 37.00 (939) 19.10 (485) 7.68 (195)

FBF-0102 5.37 (136) 35.19 (894) 41.68 (1,059) 10.42 (265) 67.75 (1,708) 19.10 (485) 7.68 (195)

FBF-0101 6.70 (150) 20.78 (487) 27.62 (701) 11.75 (299) 38.00 (965) 19.10 (485) 7.68 (195)

FBF-0102 6.70 (150) 36.31 (882) 42.88 (1,089) 11.75 (299) 69.00 (1,753) 19.10 (485) 7.68 (195)

FBF-0102* 8.00 (203) 37.19 (945) 43.79 (1,112) 13.07 (332) 70.20 (1,783) 19.10 (485) 7.68 (195) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversion from inches.

USEF-FBH-12

10-2014

FLOWLINE II™ Single Bag Filter Housing

Unique, internal body-to-basket O-ring seal prevents bypass and is easy to maintain

This single bag filter housing features a unique one-piece body design that eliminates the traditional body-to-bottom cap circumferential weld. Units come standard with filter bag size 01 or 02 stainless steel restrainer baskets.

Features � Side inlet with evacuation cover prevents spillage of unfiltered liquid, allowing for clean and easy filter bag change-outs � Easy open cover features integral handle, 1/4” vent and gauge ports and “no tools” eye-bolt closures � 316 stainless steel support basket

Eaton’s FLOWLINE II


offers the most cost-

effective solution to


requirements.

One-piece body construction is the easy and economical choice for single bag filter housing applications

Options � Available in 304 or 316 stainless steel for high corrosion resistance or carbon steel � Available in three configu-rations: side in and bottom out; side in and side out on opposite sides for in-line piping; or side in and side out on the same side for loop design layouts or duplexing � End connection options include 2” NPT or 2” 150# RF flanged. The size 02 unit is also available with 3” 150# RF flanges in the side in/side out and loop configuration as well as bottom out configuration

Available in the US only. Kynar® is a registered trademark of Arkema Inc.

� Adjustable mounting legs for simplified installation � Kynar® compression ring provides an advanced, long-term solution for securing the filter media and support basket into the enclosure � Buna-N® O-ring seals for cover and basket � Bead-blast, external finish is standard for stainless steel construction. Shop paint is standard for carbon steel construction










8

FLOWLINE II Single Bag Filter Housing

Technical data

ModelsNo. of



psi (bar)Max. temp.



lb (kg)I/O

connections

SBL101__020N 1 01 88 (20) 150 (10) 250 (120) 4 (15.5) 37 (16.8) 2” thread

SBL102__020N 1 02 176 (40) 150 (10) 250 (120) 7 (27.0) 50 (22.7) 2” thread

SBL101__020A 1 01 88 (20) 150 (10) 250 (120) 4 (15.5) 37 (16.8) 2” flange

SBL102__020A 1 02 176 (40) 150 (10) 250 (120 7 (27.0) 50 (22.7) 2” flange

SBL102__030A 1 02 176 (40) 150 (10) 250 (120) 7 (27.0) 69 (31.4) 3” flange 1 Maximum theoretical flow based on water viscosity, filter bag specific.



SBL101__020N 4.80 (122) 18.39 (467) 25.25 (641) 9.88 (251) 35.55 (903) 19.10 (485) 7.68 (195)

SBL102__020N 4.80 (122) 33.55 (852) 40.41 (1,026) 9.88 (251) 66.50 (1,689) 19.10 (485) 7.68 (195)

SBL101__020A 6.84 (174) 19.67 (500) 26.54 (674) 11.92 (303) 34.44 (875) 19.10 (485) 7.68 (195)

SBL102__020A 6.84 (174) 34.83 (885) 41.70 (1,059) 11.92 (303) 67.52 (1,715) 19.10 (485) 7.68 (195)

SBL102__030A 7.98 (180) 35.30 (897) 41.93 (1,065) 12.15 (309) 68.31 (1,735) 19.10 (485) 7.68 (195) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversion from inches.

G

E C

A

D

B

F

USEF-FBH-13

10-2014



Pre-filtration ✓


Circuit filtration Continuous filtration




Galvanic industry

POLYLINE™ Single Bag Filter Housing

PPL/PVDF models feature external cover threads

This single bag filter housing has no metal components to rust, corrode or contaminate the process media and is ideal for contamination sensitive or severely corrosive applications. Units come standard with filter bag size 01 or 02 polypropylene or size 02 PVDF restrainer baskets.

Features � All plastic construction with smooth interior surfaces makes it easy to clean � Compression hold down creates 360 degree sealing between the filter bag and the bag filter housing

Eaton’s POLYLINE single

bag filter housing is

an all-plastic, rugged

polypropylene or PVDF

construction for superior

corrosion resistance.

The glass fiber

reinforced polypropylene

withstands high-pressure

and temperature

combinations.

Choice of PPL or PVDF construction for ultra-pure or corrosive applications

� Removable, “no tools required” spin-off cover for quick filter bag change-outs. Just a few turns of the cover using the built-in handle and the housing opens and closes with little effort � Standard design available with threaded or flanged connections � Vent/bleed valve installed on the housing cover and an integral mounting flange for rock-solid installation without the need for support legs � Dual outlets allow either in-line or loop piping connections with other outlet used as a drain

Options � Available in glass fiber reinforced polypropylene or PVDF � Viton® seals and gaskets for the cover and restrainer basket are standard. EPDM seals and gaskets are available �Multiple I/O connections to suit application � Round bottom restrainer basket size 01 or 02 available in polypropylene











8

Technical data

ModelsNo. of



psi (bar)Max. temp.



lb (kg)I/O

connections

PBF-0101 (thread) 1 1 88 (20) 150 @ 70 ° F (10 @ 21 °C) 240 @ 70 psi (115 @ 4.8 bar) 9.5 (36) 49 (22.3) 2” thread

PBF-0102 (thread) 1 2 176 (40) 150 @ 70 °F (10 @ 21 °C) 240 @ 70 psi (115 @ 4.8 bar) 9.5 (36) 63 (28.6) 2” thread

PBF-0101 (flange) 1 1 88 (20) 150 @ 70 °F (10 @ 21 °C) 240 @ 70 psi (115 @ 4.8 bar) 6.6 (25) 53 (24.0) 2” flange

PBF-0102 (flange) 1 2 176 (40) 150 @ 70 °F (10 @ 21 °C) 240 @ 70 psi (115 @ 4.8 bar) 9.5 (36) 66 (30.0) 2” flange

1 Maximum theoretical flow based on water viscosity, filter bag specific. 2 Depending on seal material. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.

POLYLINE Single Bag Filter Housing


Models A B C D E F G H

PBF-0101 (thread) 6.50 (165) 10.00 (254) 3.25 (83) 34.12 (867) 20.00 (508) 18.38 (467) 6.13 (156) 23.88 (607)

PBF-0102 (thread) 6.50 (165) 10.00 (254) 3.25 (83) 50.12 (1,273) 36.00 (914) 18.38 (467) 6.13 (156) 39.88 (1,013)

PBF-0101 (flange) 5.69 (145) 10.00 (254) 3.25 (83) 34.12 (867) 20.00 (508) 18.38 (467) 8.63 (219) 23.88 (607)

PBF-0102 (flange) 5.69 (145) 10.00 (254) 3.25 (83) 50.12 (1,273) 36.00 (914) 18.38 (467) 8.63 (219) 39.88 (1,013) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.


Medium filtration > 10 µm ✓

Fine filtration < 10 µm

Pre-filtration ✓


Circuit filtration ✓

Continuous filtration

Solvents, paints Fats and oils Catalyst, activated carbon Acids, bases ✓

Petrochemicals Water, waste water ✓

Chemical industry ✓

Pharmaceuticals Metal cleaning Automotive Electronics ✓

Food and beverage Paint and lacquer Water treatment ✓

Galvanic industry ✓

°

°

psi

B

(clearance) E

C

A

F

H

D

G

Operating temperature/pressure for POLYLINE

single bag filter housings

B

E (clearance)

C

A

F

H

D

G

USEF-FBH-15

10-2014

SIDELINE™ Single Bag Filter Housing

MINILINE SBF(available EMEA only)

This single bag filter housing is a solid, investment-cast filter. Units come standard with filter bag size 01 or 02 stainless steel restrainer baskets. Sizes 03 and 04 available in EMEA.

Features � Side inlet with evacuation cover prevents spillage of unfiltered liquid, allowing for clean and easy filter bag change-outs � Cover opening direction easily adapts to different piping layouts and adjusts in the field to accommodate walls, posts or other obstructions � Compression hold down creates 360 degree sealing between the filter bag and the bag filter housing

� Ergonomic, integral cover handle is easy to open � Standard design available with threaded or flanged connections � Smooth, bead-blasted finish, coupled with a minimum two-weld design makes it easy to completely clean the interior � Designed in accordance with Section VIII, Division 1 of the ASME Code (standard in the US), “AD 2000-Merkblätter”, EN 13445 and PED (standard in EMEA)

Options � Available in 316 stainless steel for high corrosion resistance. 316 Ti stainless steel version available in EMEA �Magnetic inserts to collect metallic chips, fines and dust for sizes 01 and 02 � Buna-N® O-rings for the cover are standard. EPDM, Viton®, PTFE encapsulated Viton or silicone rubber seals and gaskets are available �Multiple I/O connections to suit application � Available with eye-bolt closure or T-bolt closure for faster maintenance


Eaton’s SIDELINE


is a mid-priced bag filter

housings for most

industrial applications.

Reliable, mid-priced filter housing for most applications

Ergonomic, integral cover handle is easy to open and close

Compression bag hold down creates 360 degree sealing between filter bag and bag filter housing










8

Technical data

ModelsNo. of



psi (bar)Max. temp.



lb (kg)I/O

connections

SBF-0101 1 1 88 (20) 150 (10) 400 (160) 4.75 (18) 84.0 (38.1) 2” flange

SBF-0102 1 2 176 (40) 150 (10) 400 (160) 8.45 (32) 102.0 (46.3) 2” flange

SBF-0103* 1 3 26 (6) 300 (16) 225 (160) 0.79 (3) 24.0 (12.0) 1½” thread

SBF-0104* 1 4 53 (12) 300 (16) 225 (160) 1.19 (4.5) 26.0 (13.0) 1½” thread

TSBF-0101* 1 1 88 (20) 150 (6) 400 (160) 4.75 (18) 84.0 (38.1) 2” flange

TSBF-0102* 1 2 176 (40) 150 (6) 400 (160) 8.45 (32) 102.0 (46.3) 2” flange

TSBF-0103* 1 3 26 (6) 300 (16) 225 (160) 0.79 (3) 24.0 (12.0) 1½” thread

TSBF-0104* 1 4 53 (12) 300 (16) 225 (160) 1.19 (4.5) 26.0 (13.0) 1½” thread 1 Maximum theoretical flow based on water viscosity, filter bag specific. Metric measures represent comparable products produced for EMEA and may not be an exact conversions. * Available in EMEA only.

SIDELINE Single Bag Filter Housing


Model A B C D E G

SBF-0101 8.66 (220) 19.50 (495) 26.62 (676) 14.38 (365) 38.00 (965) 8.62 (219)

SBF-0102 8.66 (220) 35.00 (889) 42.12 (1,070) 14.38 (365) 69.00 (1,753) 8.62 (219)

SBF-0103* 3.50 (110) 11.81 (300) 18.12 (460) 7.48 (190) 23.00 (584) 4.49 (114)

SBF-0104* 3.50 (110) 17.87 (454) 24.25 (616) 7.48 (190) 34.50 (876) 4.49 (114)

TSBF-0101* 8.66 (220) 19.49 (495) 23.62 (600) 13.50 (343) 32.48 (825) 8.62 (219)

TSBF-0102* 8.66 (220) 35.04 (890) 39.17 (995) 13.50 (343) 48.03 (1,220) 8.62 (219)

TSBF-0103* 4.33 (110) 11.81 (300) 15.51 (394) 8.66 (220) 19.06 (484) 4.49 (114)

TSBF-0104* 4.33 (110) 17.91 (455) 21.65 (550) 8.66 (220) 25.20 (640) 4.49 (114) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversion from inches.



Fine filtration < 10 µm

Pre-filtration ✓

Safety filtration ✓

High volumeBatch filtration ✓



Solvents, paints ✓

Fats and oils ✓

Catalyst, activated carbon Acids, bases ✓

Petrochemicals ✓

Water, waste water ✓


Pharmaceuticals Metal cleaning ✓

Automotive Electronics Food and beverage ✓

Paint and lacquer ✓

Water treatment ✓


G

E C

A

D

B

USEF-FBH-11

10-2014

TOPLINE™ Single Bag Filter Housing

Eaton’s TOPLINE single bag filter housing is the best bag filter housing for the most demanding applications and features easy filter bag change-outs as well as providing optimum sealing of the filter bag.

This single bag filter housing is simply the best, from its high-performance design to its heavy-duty investment-cast components. Units come standard with filter bag size 01 or 02 stainless steel restrainer baskets.

The best single bag filter housing for the most demanding applications

Features � Top inlet requires less headroom and allows liquid flow through the cover, improves sealing, reduces product loss and makes filter bag change-outs cleaner � Smooth, bead-blasted finish, coupled with a minimum two-weld design makes it easy to completely clean the interior � Adjustable mounting legs for simplified installation � Designed in accordance with Section VIII, Division 1 of the ASME Code (standard in the US), “AD 2000-Merkblätter”, EN 13445 and PED (standard in EMEA)

Options � Available in carbon steel or 316 stainless steel for high corrosion resistance. 316 Ti stainless steel version available in EMEA �Magnetic inserts to collect metallic chips, fines and dust for sizes 01 and 02 � Buna-N® O-rings for the cover are standard. EPDM, Viton®, PTFE encapsulated Viton or silicone rubber seals and gaskets are available �Multiple I/O connections to suit application � Available with eye-bolt closure or T-bolt closure for faster maintenance


Top inlet connection with hinged cover make filter bag change-outs quick and easy










8

Technical data

ModelsNo. of



psi (bar)Max. temp.



lb (kg)I/O

connections

TBF-0101 1 1 88 (20) 150 (10) 400 (160) 3.5 (13.0) 80 (36) 2”

TBF-0102 1 2 176 (40) 150 (10) 400 (160) 7.25 (27.5) 93 (42) 2”

TTBF-0101* 1 1 88 (20) 150 (10) 400 (160) 3.5 (13.0) 80 (36) 2”

TTBF-0102* 1 2 176 (40) 150 (10) 400 (160) 7.25 (27.5) 93 (42) 2” 1 Maximum theoretical flow based on water viscosity, filter bag specific. Metric measures represent comparable products produced for EMEA and may not be an exact conversions. * Available in EMEA only.

TOPLINE Single Bag Filter Housing



TBF-0101 12.10 (307) 15.50 (395) 21.25 (540) 19.10 (486) 32.00 (813) 19.25 (489) 8.62 (219)

TBF-0102 12.10 (307) 31.00 (790) 36.75 (934) 19.10 (486) 63.00 (1,600) 19.25 (489) 8.62 (219)

TTBF-0101* 13.78 (350) 14.76 (375) 22.44 (570) 19.69 (500) 34.72 (882) 24.41 (620) 8.62 (219)

TTBF-0102* 13.78 (350) 29.53 (750) 37.17 (944) 19.69 (500) 49.09 (1,247) 24.41 (620) 8.62 (219) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversion from inches.

ApplicationsCoarse filtration > 500 µm Medium filtration > 10 µm ✓

Fine filtration < 10 µm ✓

Pre-filtration ✓


High volumeBatch filtration ✓




Fats and oils ✓

Catalyst, activated carbon ✓Acids, bases ✓

Petrochemicals ✓



Pharmaceuticals ✓

Metal cleaning Automotive ✓

Electronics ✓

Food and beverage ✓

Paint and lacquer ✓

Water treatment ✓


G

E

A

D

B

F

C

USEF-FBH-10

10-2014

MAXILINE™ VMBF Multi-Bag Filter Housing

This multi-bag filter housing is equipped with the QIC-LOCK™ opening mechanism. Units are available in 4, 6, 8, 10 and 12 filter bag configurations and come standard with filter bag size 02 stainless steel restrainer baskets.

Features � Low profile design with side inlet and tangential outlet provides easy and full drainage and reduces housing height to make filter bag change-outs easier. No need for ladders, stools or catwalks � Positive O-ring sealing provides bypass-free, safe filtration while the unique 3-point hold down ensures a high-quality seal between each filter bag and the housing body

Eaton’s MAXILINE

VMBF multi-bag filter

housing is user-friendly,

cost-effective and

designed for high

volume applications and

processes demanding

frequent filter bag

change-outs. Ideal for

batch process runs

and high dirt load

applications.

Designed for high capacity and easy, safe change-outs

� QIC-LOCK opening mechanism allows for safe, easy and fast filter bag change-outs for higher productivity and lower operating costs. Ideal for processes requiring frequent filter bag changes such as batch applications � Automatic safety interlock for venting housing (cover cannot be opened if housing is under pressure) � A counter-balanced, spring-assisted cover lifting mechanism allows for quick and easy opening of even large covers by one person � Heavy-duty stainless steel mounting legs are included � Designed in accordance with Section VIII, Division 1 of the ASME Code (standard in the US), “AD 2000-Merkblätter”, EN 13445 and PED (standard in EMEA)

Options

� Available in 304 or 316 stainless steel for high corrosion resistance � Buna N® O-rings for the cover are standard. EPDM, Viton® or silicone rubber seals and gaskets are available �Multiple I/O connections to suit application


QIC-LOCK rapid opening mechanism ensures simple, operator-friendly, and safe operation with minimal downtime to increase productivity and decrease running costs










8

Technical data

ModelsNo. of



psi (bar)Max. temp.



lb (kg)I/O

connections

VMBF-0402 4 2 705 (160) 150 (10) 250 (121) 69 (261) 484 (220) 4”

VMBF-0602* 6 2 1,057 (240) 150 (10) 250 (121) 139 (526) 920 (417) 6”

VMBF-0802 8 2 1,409 (320) 150 (10) 250 (121) 141 (534) 970 (440) 8”

VMBF-1002* 10 2 1,761 (400) 150 (10) 250 (121) 248 (939) 1,050 (476) 10”

VMBF-1202 12 2 2,114 (480) 150 (10) 250 (121) 248 (939) 1,070 (485) 10” 1 Maximum theoretical flow based on water viscosity, filter bag specific. Metric measures represent comparable products produced for EMEA and may not be an exact conversions. * Available in the US only.

MAXILINE VMBF Multi-Bag Filter Housing


Models A B C D E F

VMBF-0402 6.00 (152) 20.00 (508) 10.47 (266) 22.00 (559) 15.75 (400) 68.00 (1,727)

VMBF-0602* 7.25 (184) 20.00 (508) 12.78 (325) 31.50 (800) 20.50 (521) 82.00 (2,083)

VMBF-0802 8.25 (210) 19.00 (483) 12.78 (325) 31.50 (800) 20.50 (521) 82.00 (2,083)

VMBF-1002* 10.00 (254) 19.00 (483) 14.37 (365) 38.00 (965) 25.00 (635) 92.00 (2,337)

VMBF-1202 10.00 (254) 19.00 (483) 14.37 (365) 38.00 (965) 25.00 (635) 92.00 (2,337) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. The 8 bag loop style dimensions are available on the Eaton website. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.


Medium filtration >10 µm ✓


Pre-filtration ✓


High volume ✓

Batch filtration ✓




Fats and oils ✓


Petrochemicals ✓




Automotive ✓

Electronics Food and beverage Paint and lacquer ✓

Water treatment ✓

Galvanic industry

A

E E

D

B

CF

USEF-FBH-05

10-2014

MAXILINE™ MBF Multi-Bag Filter Housing

Unique 3-point hold down ensures a high-quality seal between each filter bag and housing body

This multi-bag filter housing is equipped with proven and easy-to-use rugged eye-bold cover closure. The housing volume is optimized to minimize product loss. Units are available in 3, 4, 6 and 8 filter bag configurations and come standard with filter bag size 02 stainless steel restrainer baskets.

Features � Low profile design with side inlet and tangential outlet provides easy and full drainage and reduces housing height to make filter bag change-outs easier. No need for ladders, stools or catwalks

Eaton’s MAXILINE MBF multi-bag filter housing

is user-friendly, cost-

effective and designed

for high volume,

multiple applications and

processes.

Rugged design offers many options to meet demanding specifications

� Positive O-ring sealing provides bypass-free, safe filtration while the unique 3-point hold down ensures a high-quality seal between each filter bag and the housing body � A counter-balanced, spring-assisted cover lifting mechanism allows for quick and easy opening of even large covers by one person � Heavy-duty stainless steel mounting legs are included � Designed in accordance with Section VIII, Division 1 of the ASME Code (standard in the US), “AD 2000-Merkblätter”, EN 13445 and PED (standard in EMEA)

Options � Available in 304 or 316 stainless steel for high corrosion resistance. Carbon steel version available in North America � Buna-N® O-rings for the cover are standard. EPDM, Viton®, PTFE encapsulated Viton or silicone rubber seals and gaskets are available �Multiple I/O connections to suit application � Available with segment clamps � Custom fittings, surface finishes, coatings and design code ratings to meet specified applications � Available with shell side outlet











8

Technical data

ModelsNo. of



psi (bar)Max. temp.



lb (kg)I/O

connections

MBF-0302* 3 2 528 (120) 150 (10) 250 (121) 40 (151) 460 (227) 3”

MBF-0402 4 2 705 (160) 150 (10) 250 (121) 69 (261) 615 (279) 4”

MBF-0602* 6 2 1,057 (240) 150 (10) 250 (121) 90 (341) 810 (367) 6”

MBF-0802 8 2 1,409 (320) 150 (10) 250 (121) 116 (439) 970 (440) 8” 1 Maximum theoretical flow based on water viscosity, filter bag specific. Metric measures represent comparable products produced for EMEA and may not be an exact conversions. * Available in the US only.

MAXILINE MBF Multi-Bag Filter Housing


Models A B C D E F

MBF-0302* 6.00 (152) 22.50 (572) 6.43 (163) 18.00 (457) 12.75 (324) 60.00 (1,524)

MBF-0402 6.00 (152) 22.19 (564) 7.93 (201) 24.00 (610) 16.00 (406) 70.00 (1,778)

MBF-0602* 7.00 (178) 20.00 (508) 9.81 (249) 26.00 (660) 18.50 (470) 74.00 (1,880)

MBF-0802 8.25 (210) 19.00 (483) 10.81 (275) 30.00 (762) 20.50 (521) 79.50 (2,019) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. The 8 bag loop style dimensions are available on the Eaton website. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.




Pre-filtration ✓


High volume ✓





Fats and oils ✓


Petrochemicals ✓




Automotive ✓


Water treatment ✓

Galvanic industry

USEF-FBH-06

10-2014

MAXILINE™ VMDE Multi-Bag Filter Housing

Eaton’s MAXILINE VMDE multi-bag filter housing is user-friendly, seals perfectly and is designed for safe filtration and minimized product loss. Ideal for batch processes which demand the highest quality of filtration.

This multi-bag filter housing is equipped with the QIC-LOCK™ opening mechanism. The flat lid construction, combined with Eaton’s SENTINEL® filter bag seal rings, seal perfectly against the lid and minimize the amount of residual product on the inner surface. This reduces product loss, spillage and makes cleaning easier. Units are available in 4 filter bag configuration and come standard with filter bag size 02 stainless steel restrainer baskets.

Features � QIC-LOCK opening mechanism allows for safe, easy and fast filter bag change-outs for higher productivity and lower operating costs. Ideal for processes requiring frequent filter bag changes such as batch applications

Designed for easy, safe filter bag change-outs with minimal product loss

� Automatic safety interlock for venting housing (cover cannot be opened if housing is under pressure) � A counter-balanced, spring-assisted cover lifting mechanism allows for quick and easy opening of even large covers by one person � Flat lid design improves sealing, reduces product loss and makes filter bag change-outs cleaner � Direct feeding of filter bags via individual inlets generates a laminar flow. This ensures optimal cake formation to further improve filtration performance � Heavy-duty stainless steel mounting legs are included � Designed in accordance with Section VIII, Division 1 of the ASME Code (standard in the US), “AD 2000-Merkblätter”, EN 13445 and PED (standard in EMEA)

Options � Available in 304 or 316 stainless steel for high corrosion resistance � Four bag filter housing for size 01 and 02 filter bags � Buna-N® O-rings for the cover are standard. EPDM, Viton®, PTFE encapsulated Viton or silicone rubber seals and gaskets are available �Multiple I/O connections to suit application � Low profile design with side inlet and tangential outlet provides easy and full drainage and reduces housing height to make filter bag change-outs easier. No need for ladders, stools or catwalks

Available in the EMEA only. Viton® is a registered trademark of E. I. du Pont de Nemours and company.

SENTINEL filter bags utilize a pressure acti-vated sealing lip, which responds to increases in differential pressure










8

Technical data

ModelsNo. of



psi (bar)Max. temp.



lb (kg)I/O

connections

VMDE-0402 bottom outlet 4 2 705 (160) 150 (10) 248 (120) 49 (185) 485 (220) DN 100 PN 16 (DIN flange)

VMDE-0402 tangential outlet 4 2 705 (160) 150 (10) 248 (120) 49 (185) 485 (220) DN 100 PN 16 (DIN flange) 1 Maximum theoretical flow based on water viscosity, filter bag specific. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.

MAXILINE VMDE Multi-Bag Filter Housing


Models A B C D E F

VMDE-0402 bottom outlet 18.70 (475) 29.13 (740) 9.02 (229) 22.01 (559) 15.75 (400) 79.72 (2,025)

VMDE-0402 tangential outlet 9.84 (250) 20.75 (527) 9.02 (229) 22.01 (559) 15.75 (400) 72.64 (1,845) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.


Medium filtration >1 0 µm ✓


Pre-filtration ✓


High volume ✓





Fats and oils ✓


Petrochemicals ✓




Automotive ✓


Water treatment ✓

Galvanic Industry

A

DB

C

F

E A

DB

C

F

E

Tangential outlet Bottom outlet

USEF-FBH-07

10-2014

MAXILINE™ MDE Multi-Bag Filter Housing

This multi-bag filter housing is equipped with proven and easy-to-use rugged eye-bolt cover closure. The flat lid construction, combined with Eaton’s SENTINEL® filter bag seal rings, seal perfectly against the lid and minimize the amount of residual product on the inner surface. This reduces product loss, spillage and makes cleaning easier. Units are available in 4 filter bag configuration and come standard with filter bag size 02 stainless steel restrainer baskets.

Eaton’s MAXILINE MDE multi-bag filter housing is user-friendly, seals perfectly and is designed for safe filtration and minimized product loss. Ideal for batch process runs and high dirt load applications.

Designed for easy, safe filter bag change-outs with minimal product loss

Features � A counter-balanced, spring-assisted cover lifting mechanism allows for quick and easy opening of even large covers by one person � Flat lid design improves sealing, reduces product loss and makes filter bag change-outs cleaner � Direct feeding of filter bags via individual inlets generates a laminar flow. This ensures optimal cake formation to further improve filtration performance � Heavy-duty stainless steel mounting legs are included � Designed in accordance with Section VIII, Division 1 of the ASME Code (standard in the US), “AD 2000-Merkblätter”, EN 13445 and PED (standard in EMEA)

Options � Available in 304 or 316 stainless steel for high corrosion resistance � Buna-N® O-rings for the cover are standard. EPDM, Viton®, PTFE encapsulated Viton or silicone rubber seals and gaskets are available �Multiple I/O connections to suit application � Low profile design with side inlet and tangential outlet provides easy and full drainage and reduces housing height to make filter bag change-outs easier. No need for ladders, stools or catwalks

Available in EMEA only. Viton® is a registered trademark of E. I. du Pont de Nemours and company.

SENTINEL filter bags utilize a pressure acti-vated sealing lip, which responds to increases in differential pressure










8

Technical data

ModelsNo. of



psi (bar)Max. temp.



lb (kg)I/O

connections

MDE-0402 tangential/304 4 2 705 (160) 100 (7) 140 (60) 49 (185) 551 (250) DN 100 PN 10 (DIN flange)

MDE-0402 tangential/316 4 2 705 (160) 100 (7) 140 (60) 49 (185) 551 (250) DN 100 PN 10 (DIN flange)

MDE-0402 bottom outlet/304 4 2 705 (160) 100 (7) 140 (60) 49 (185) 551 (250) DN 100 PN 10 (DIN flange)

MDE-0402 bottom outlet/316 4 2 705 (160) 100 (7) 140 (60) 49 (185) 551 (250) DN 100 PN 10 (DIN flange) 1 Maximum theoretical flow based on water viscosity, filter bag specific. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.

MAXILINE MDE Multi-Bag Filter Housing


Models A B C D E F

MDE-0402 tangential/304 10.04 (255) 20.75 (527) 9.53 (242) 22.00 (559) 17.72 (450) 72.64 (1,845)

MDE-0402 tangential/316 10.04 (255) 20.75 (527) 9.53 (242) 22.00 (559) 17.72 (450) 72.64 (1,845)

MDE-0402 bottom outlet/304 18.70 (475) 27.13 (689) 9.53 (242) 22.00 (559) 17.72 (450) 87.68 (2,227)

MDE-0402 bottom outlet/316 18.70 (475) 27.13 (689) 9.53 (242) 22.00 (559) 17.72 (450) 87.68 (2,227) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.




Pre-filtration ✓


High volume ✓




Solvents, ppaints ✓

Fats and oils ✓


Petrochemicals ✓




Automotive ✓


Water treatment ✓

Galvanic industry

A

D

B

C

F

E

USEF-FBH-08

10-2014

MAXILINE™ MBF Multi-Bag Filter Housing

This multi-bag filter housing is equipped with a robust hand wheel operated davit assembly cover. Simply loosen the swing bolts, turn the davit hand wheel and swing the cover aside to open. Units are available in 3, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22 and 24 filter bag configurations and come standard with filter bag size 02 stainless steel restrainer baskets.

Eaton’s MAXILINE MBF

multi-bag filter housing

features a cost effective,

hand wheel operated

davit assembly cover and

offers up to 24 filter bags

in one multi-bag filter

housing for very high

flow rates and high dirt

load applications.

Holds up to 24 filter bags in a reliable, cost-effective design

Features � A robust, easy to use hand wheel operates the davit assembly cover making it perfect for cost-sensitive applications � Positive O-ring sealing provides bypass-free, safe filtration while the unique 3-point hold down ensures a high-quality seal between each filter bag and the housing body � Heavy-duty stainless steel mounting legs are included � Designed in accordance with Section VIII, Division 1 of the ASME Code (standard in the US), “AD 2000-Merkblätter”, EN 13445 and PED (standard in EMEA)

Options � Available in 304 or 316 stainless steel for high corrosion resistance � Buna-N® O-rings for the cover are standard. EPDM, Viton®, PTFE encapsulated Viton or silicone rubber seals and gaskets are available �Multiple I/O connections to suit application � Available with hydraulic-assist davit assembly cover � Custom fittings, surface finishes, coatings and design code ratings to meet specified applications


Unique 3-point hold down ensures a high-quality seal between each filter bag and housing body










8

Technical data

ModelsNo. of



psi (bar)Max. temp.



lb (kg)I/O

connections

MBF-0302* 3 2 528 (120) 150 (10) 250 (121) 40 (151) 460 (208) 3”

MBF-0402 4 2 705 (160) 150 (10) 250 (121) 54 (204) 615 (279) 4”

MBF-0602* 6 2 1,057 (240) 150 (10) 250 (121) 95 (360) 810 (367) 6”

MBF-0802 8 2 1,409 (320) 150 (10) 250 (121) 140 (530) 970 (440) 8”

MBF-1002* 10 2 1,761 (400) 150 (10) 250 (121) 215 (814) 1,400 (635) 10”

MBF-1202 12 2 2,114 (480) 150 (10) 250 (121) 245 (927) 1,500 (680) 10”

MBF-1402* 14 2 2,466 (560) 150 (10) 250 (121) 311 (1,177) 1,800 (816) 10”

MBF-1602* 16 2 2,818 (640) 150 (10) 250 (121) 317 (1,200) 1,875 (850) 12”

MBF-1802* 18 2 3,170 (720) 150 (10) 250 (121) 446 (1,688) 2,405 (1,090) 12”

MBF-2002* 20 2 3,523 (800) 150 (10) 250 (121) 454 (1,718) 2,445 (1,109) 14”

MBF-2202* 22 2 3,875 (880) 150 (10) 250 (121) 570 (2,158) 2,730 (1,238) 14”

MBF-2402* 24 2 4,227 (960) 150 (10) 250 (121) 570 (2,158) 2,730 (1,238) 14” 1 Maximum theoretical flow based on water viscosity, filter bag specific. Metric measures represent comparable products produced for EMEA and may not be an exact conversions. * Available in the US only.

MAXILINE MBF Multi-Bag Filter Housing


Models A B C D E F

MBF-0302* 6.00 (152) 22.50 (572) 6.43 (163) 18.00 (457) 12.75 (324) 57.00 (1,448)

MBF-0402 6.00 (152) 22.19 (564) 7.93 (201) 24.00 (610) 16.00 (406) 61.00 (1,550)

MBF-0602* 7.00 (178) 20.00 (508) 9.81 (249) 26.00 (660) 18.50 (470) 62.00 (1,575)

MBF-0802 8.25 (210) 19.00 (483) 10.81 (275) 30.00 (762) 20.50 (521) 64.00 (1,625)

MBF-1002* 10.00 (254) 17.00 (432) 13.31 (338) 36.00 (914) 24.50 (622) 70.00 (1,778)

MBF-1202 10.00 (254) 17.00 (432) 13.83 (352) 38.00 (965) 24.50 (622) 72.00 (1,829)

MBF-1402* 11.50 (292) 20.00 (508) 11.81 (300) 42.00 (1,067) 28.00 (711) 74.00 (1,880)

MBF-1602* 11.50 (292) 20.00 (508) 11.81 (300) 42.00 (1,067) 28.00 (711) 75.00 (1,905)

MBF-1802* 11.50 (292) 20.00 (508) 11.81 (300) 42.00 (1,067) 28.00 (711) 75.00 (1,905)

MBF-2002* 12.50 (318) 22.00 (559) 11.38 (289) 48.00 (1,219) 31.00 (787) 82.00 (2,083)

MBF-2202* 12.50 (318) 22.00 (559) 13.44 (341) 52.00 (1,321) 33.00 (838) 84.00 (2,134)

MBF-2402* 12.50 (318) 22.00 (559) 13.44 (341) 52.00 (1,321) 33.00 (838) 84.00 (2,134) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversion from inches.




Pre-filtration ✓


High volume ✓

Batch filtration Circuit filtration ✓

Continuous filtration Solvents, paints ✓

Fats and oils ✓


Petrochemicals ✓




Automotive ✓


Water treatment ✓

Galvanic industry

A

D

E E

B

C

Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request.

Epoxy coating is only one of various surface coating and finish options (available in EMEA only)

USEF-FBH-09

10-2014

Eaton’s PROLINE 100 Series SE multi-bag filter housing is user-friendly, cost-effective and designed for high volume applications and processes demanding frequent filter bag change-outs. Ideal for batch process runs and high dirt load applications.

PROLINE 100TM Series SE Multi-Bag Filter Housing

PROLINE 100 Series SE multi-bag filter housing with 8 filter bag capacity

This multi-bag filter housing with the QIC-LOCK opening mechanism is the most competitively priced multi-bag filter housing Eaton has to offer. Units are available in 4, 6 and 8 filter bag configurations and come standard with filter bag size 02 stainless steel restrainer baskets.

Features � 100 psi (6.9 bar), non-code bag filter housing, for a wide variety of filtration applications � Low profile design with side inlet and tangential outlet provides easy and full drainage and reduces housing height to make filter bag change-outs easier. No need for ladders, stools or catwalks

High-volume multi-bag filter housing with QIC-LOCK™ opening mechanism

� Positive O-ring sealing provides bypass-free, safe filtration while the unique 3-point hold down ensures a high-quality seal between each filter bag and the housing body � QIC-LOCK opening mechanism allows for safe, easy and fast filter bag change-outs for higher productivity and lower operating costs. Ideal for processes requiring frequent filter bag changes such as batch applications � Automatic safety interlock for venting housing (cover cannot be opened if housing is under pressure) � A counter-balanced, spring-assisted cover lifting mechanism allows for quick and easy opening of even large covers by one person

� 304 stainless steel construction with bead-blast, external finish � 150# RF flanged inlet and outlet ports for side inlet and tangential outlet configuration � Heavy-duty stainless steel mounting legs are included

Options � Available as in-line or loop piping configuration (shown) � Buna-N® O-rings for the cover are standard. Viton® or EPDM are available

Available in the US only. Viton® is a registered trademark of E. I. du Pont de Nemours and company.

Opening the housing for change-out is simple and quick. Disengaging the safety interlock releases system pressure.

A few turns of the hand wheel opens the V-clamp collar so the cover can be lifted.

The counter-balanced hinge allows the cover to be lifted with ease and stay in any position for filter bag change-out.










8

PROLINE 100 Series SE Multi-Bag Filter Housing



VPMBF-0402-BB07-040A-NT-11SE 10.06 (256) 20.75 (527) 55.63 (1,413) 22.00 (559) 36.00 (914) 71.13 (1,807) 17.75 (451)

VPMBF-0402-BB07-040A-NT-11SE-L 10.06 (256) 20.75 (527) 55.63 (1,413) 22.00 (559) 36.00 (914) 71.13 (1,807) 17.75 (451)

VPMBF-0602-BB07-060A-NT-11SE 7.88 (200) 20.81 (529) 55.44 (1,408) 31.50 (800) 47.00 (1,194) 78.88 (2,003) 23.50 (597)

VPMBF-0602-BB07-060A-NT-11SE-L 7.88 (200) 20.81 (529) 55.44 (1,408) 31.50 (800) 46.13 (1,172) 78.88 (2,003) 23.50 (597)

VPMBF-0802-BB07-060A-NT-11SE 7.88 (200) 20.81 (529) 55.44 (1,408) 31.50 (800) 47.00 (1,194) 78.88 (2,003) 23.50 (597)

VPMBF-0802-BB07-060A-NT-11SE-L 7.88 (200) 20.81 (529) 55.44 (1,408) 31.50 (800) 46.13 (1,172) 78.88 (2,003) 23.50 (597) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.




Pre-filtration ✓


High volume ✓





Fats and oils ✓


Petrochemicals ✓




Automotive ✓


Water treatment ✓

Galvanic industry

A

D

BCF

E

E

G

G

Loop configuration

In-line configuration

USEF-FBH-03

10-2014

Technical data

ModelsNo. of



psi (bar)Max. temp.

°F (°C)

Housing volume gal (l)

Housing weight lb (kg)

I/O connections

VPMBF-0402-BB07-040A-NT-11SE 4 2 400 (91) 100 (6.9) 176 (80) 56 (212) 432 (196) 4” in-line

VPMBF-0402-BB07-040A-NT-11SE-L 4 2 400 (91) 100 (6.9) 176 (80) 56 (212) 432 (196) 4” loop


VPMBF-0602-BB07-060A-NT-11SE-L 6 2 900 (204) 100 (6.9) 176 (80) 120 (454) 712 (323) 6” loop


VPMBF-0802-BB07-060A-NT-11SE-L 8 2 900 (204) 100 (6.9) 176 (80) 120 (454) 736 (338) 6” loop 1 Maximum theoretical flow based on water viscosity, filter bag specific. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.

PROLINE 100™ Series HE Multi-Bag Filter Housing

PROLINE 100 Series HE multi-bag filter housing with 8 filter bag capacity

PROLINE 100 Series HE multi-bag filter housing with 4 bag capacity

This multi-bag filter housing is equipped with a proven and easy-to-use rugged eye-bolt cover closure. Units are available in 4, 6 and 8 filter bag configurations and come standard with filter bag size 02 stainless steel restrainer baskets.

Features � 100 psi (6.9 bar), non-code bag filter housing, for a wide variety of filtration applications � Low profile design with side inlet and tangential outlet provides easy and full drainage and reduces housing height to make filter bag change-outs easier. No need for ladders, stools or catwalks

Eaton’s PROLINE 100 Series HE multi-bag filter housing offers the most cost-effective solution to multi-bag units requirements’ for a wide variety of filtration applications where a code stamp is not needed.

The most competitively priced multi-bag filter housing Eaton has to offer

� Positive O-ring sealing provides bypass-free, safe filtration while the unique 3-point hold down ensures a high-quality seal between each filter bag and the housing body � A counter-balanced, spring-assisted cover lifting mechanism allows for quick and easy opening of even large covers by one person � 304 stainless steel construction with bead-blast, external finish � 150# RF flanged inlet and outlet ports for side inlet and tangential outlet configuration � Heavy-duty stainless steel mounting legs are included

Options � Available as in-line or loop piping configuration (shown) � Buna-N® O-rings for the cover are standard. EPDM, Viton®, PTFE encapsulated Viton or silicone rubber seals and gaskets are available

Available in the US only. Viton® is a registered trademark of E. I. du Pont de Nemours and company










8

Technical data

ModelsNo. of



psi (bar)Max. temp.

°F (°C)



I/O connections

PMBF-0402-BB07-040A-NT-11HE 4 2 400 (91) 100 (6) 176 (80) 56 (212) 397 (180) 4” in-line

PMBF-0402-BB07-040A-NT-11HE-L 4 2 400 (91) 100 (6) 176 (80) 56 (212) 397 (180) 4” loop





1 Maximum theoretical flow based on water viscosity, filter bag specific. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.

PROLINE 100 Series HE Multi-Bag Filter Housing


Model A B C D E F G

PMBF-0402-BB07-040A-NT-11HE 10.00 (254) 20.75 (527) 46.44 (1,180) 22.00 (559) 35.50 (901) 71.19 (1,808) 17.75 (451)

PMBF-0402-BB07-040A-NT-11HE-L 10.00 (254) 20.75 (527) 46.44 (1,180) 22.00 (559) 30.88 (784) 71.19 (1,808) 17.75 (451)

PMBF-0602-BB07-060A-NT-11HE 7.88 (200) 20.81 (529) 48.00 (1,219) 31.50 (800) 47.00 (1,194) 79.00 (2,007) 23.50 (597)

PMBF-0602-BB07-060A-NT-11HE-L 7.88 (200) 20.81 (529) 48.00 (1,219) 31.50 (800) 42.75 (1,085) 79.00 (2,007) 23.50 (597)

PMBF-0802-BB07-060A-NT-11HE 7.88 (200) 20.81 (529) 48.00 (1,219) 31.50 (800) 47.00 (1,194) 79.00 (2,007) 23.50 (597)

PMBF-0802-BB07-060A-NT-11HE-L 7.88 (200) 20.81 (529) 48.00 (1,219) 31.50 (800) 42.75 (1,085) 79.00 (2,007) 23.50 (597) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.




Pre-filtration ✓


High volume ✓





Fats and oils ✓


Petrochemicals ✓




Automotive ✓


Water treatment ✓

Galvanic industry

A

D

BCF

E

E

G

G

Loop configuration

In-line configuration

USEF-FBH-04

10-2014

DUOLINE™ Multi-Bag Filter Housing System

DUOLINE units with SIDELINE housings

This multi-bag filter housing system consists of two single bag filter housings fitted together at the inlet and outlet by a butterfly valve or ball valve assembly. The dual housing system allows the filtration process to run continuously even during filter bag change-outs. Units come standard with filter bag size 02 stainless steel restrainer baskets.

Features � Can be equipped with the most advanced TOPLINE™ single bag filter housing, the SIDELINE™ single bag filter housing for a greater range of applications or the economical FLOWLINE™ single bag filter housing for coarse particle filtration � System arrangement assures continuous flow rates. One unit can be taken off-line in sequence for filter bag change-outs without having to take the other filter unit off-line

Eaton’s DUOLINE


systems are duplex units

for continuous filtration

processes where the

system flow cannot be

shut down for filter bag

change-outs.

Duplex units for continuous filtration processes

� Swing bolt cover for quick, easy filter bag change-outs. The TOPLINE single bag filter housing features a domed cover. FLOWLINE and SIDELINE single bag filter housings covers’ feature an integrated ergonomic handle � TOPLINE and SIDELINE models feature extended five year warranties and are designed in accordance with Section VIII, Division 1 of the ASME Code (standard in the US), “AD 2000-Merkblätter”, EN 13445 and PED (standard in EMEA) � Smooth, bead-blasted finish makes it easy to completely clean the interior

Options � Housings and fittings available in stainless steel for high corrosion resistance. Carbon steel versions available in the US � Available without valves, with butterfly valves or with ball valve assemblies � Buna-N® O-rings for the cover are standard. EPDM, Viton®, PTFE encapsulated Viton or silicone rubber seals and gaskets are available � Linkage assembly available. A quick turn of the linkage handle diverts the flow from one single bag filter housing to the other, guaranteeing a synchronized changeover











8

DUOLINE Multi-Bag Filter Housing System



Pre-filtration ✓


High volume Batch filtration Circuit filtration ✓

Continuous filtration ✓

Solvents, paints Fats and oils ✓


Petrochemicals ✓



Pharmaceuticals Metal cleaning Automotive Electronics Food and beverage Paint and lacquer ✓

Water treatment ✓

Galvanic industry

D

F

E

B

A

C

DUOLINE multi-bag filter housing with

SIDELINE single bag filter housings

Technical data

ModelsNo. of



psi (bar)Max. temp.



lb (kg)I/O

connections

F3AVTB0222 (TOPLINE) 2 2 176 (40) 150 (10) 250 (160) 16 (60.5) 240 (109) 2”

F3AVTB0322 (TOPLINE) 2 2 176 (40) 150 (10) 250 (160) 16 (60.5) 240 (109) 2”

F3AVSB00222 (SIDELINE) 2 2 176 (40) 150 (10) 250 (160) 16 (60.5) 300 (134) 2”

F3AVSB00322 (SIDELINE) 2 2 176 (40) 150 (10) 250 (160) 17 (64.35) 330 (149.7) 3”

F3AVFB00422 (FLOWLINE) 2 2 176 (40) 150 (10) 250 (160) 15 (56.78) 200 (90.7) 2”

F3AVFB00442 (FLOWLINE) 2 2 176 (40) 150 (10) 250 (160) 15 (56.78) 200 (90.7) 2”

F3AVFB00443 (FLOWLINE) 2 2 176 (40) 150 (10) 250 (160) 15 (56.78) 200 (90.7) 3”

F3AVFB011073 (FLOWLINE) 2 2 176 (40) 150 (10) 250 (160) 15 (56.78) 200 (90.7) 3” 1 Maximum theoretical flow based on water viscosity, filter bag specific. 2 Depending on seal material. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.


Models A B C D E F

F3AVTB0222 (TOPLINE) 19.25 (489) 24.50 (622) 1.93 (49) 8.62 (219) 37.50 (952) 64.00 (1,625)

F3AVTB0322 (TOPLINE) 19.25 (489) 24.50 (622) 1.93 (49) 8.62 (219) 37.50 (952) 64.00 (1,625)

F3AVSB00222 (SIDELINE) 19.25 (489) 27.50 (698) 3.15 (80) 8.62 (219) 30.62 (777) 70.00 (1,778)

F3AVSB00322 (SIDELINE) 19.25 (489) 27.50 (698) 3.15 (80) 8.62 (219) 33.12 (841) 70.00 (1,778)

F3AVFB00422 (FLOWLINE) 19.25 (489) 28.44 (722) 3.34 (85) 7.68 (195) 26.75 (679) 69.00 (1,752)

F3AVFB00442 (FLOWLINE) 19.25 (489) 28.44 (722) 3.34 (85) 7.68 (195) 26.75 (679) 69.00 (1,752)

F3AVFB00443 (FLOWLINE) 19.25 (489) 28.44 (722) 3.44 (87) 7.68 (195) 31.75 (806) 69.00 (1,752)

F3AVFB01073 (FLOWLINE) 19.25 (489) 28.44 (722) 3.44 (87) 7.68 (195) 31.75 (806) 69.00 (1,752)

Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.

USEF-FBH-17

10-2014

MODULINE™ Multi-Bag Filter Housing System

This multi-bag filter housing system provides a compact and efficient assembly of two up to eight single bag filter housings. Its space-saving design can be readily expanded with additional housing units and extra banks to provide the highest level of flexibility for process requirements. The footprint is smaller than duplexed multi-bag filter housings. Units come standard with filter bag size 02 stainless steel restrainer baskets.

Features � Can be equipped with the economical FLOWLINE™ or FLOWLINE II™* single bag filter housing for coarse particle filtration, the SIDELINE™ single bag filter housing for a greater range of applications or the most advanced TOPLINE™ single bag filter housing

Eaton’s MODULINE


systems are double or

modular multi-bag units

designed for applications

where the flow rate is

too high for a single bag

filter housing.

Modular system for continuous flow capability, higher efficiency and lower costs

� System arrangement assures continuous flow rates. Each unit is individually valved and can be taken off-line in sequence for filter bag change-outs without having to take the complete bank of filters off-line � Swing bolt cover for quick, easy filter bag change-outs. The TOPLINE single bag filter housing features a domed cover. FLOWLINE and SIDELINE single bag filter housings covers’ feature an integrated ergonomic handle � TOPLINE and SIDELINE models are designed in accordance with Section VIII, Division 1 of the ASME Code (standard in the US), “AD 2000-Merkblätter”, EN 13445 and PED (standard in EMEA)

� Easy-action, 1/4-turn ball valves provide precision flow control � Smooth, bead-blasted finish makes it easy to completely clean the interior

Options � Available in stainless steel for high corrosion resistance. Carbon steel version available in the US � Buna-N® O-rings for the cover are standard. EPDM, Viton®, PTFE encapsulated Viton or silicone rubber seals and gaskets are available � Optional gauges, vents and pressurize air port with 1/4” threaded cover taps

* Available in the US only.Viton® is a registered trademark of E. I. du Pont de Nemours and company.










8

MODULINE Multi-Bag Filter Housing System



Pre-filtration ✓


High volume ✓

Batch filtration Circuit filtration Continuous filtration ✓

Solvents, paints Fats and oils ✓

Catalyst, activated carbon Acids, bases Petrochemicals ✓




Automotive ✓

Electronics Food and beverage Paint and lacquer Water treatment ✓

Galvanic industry

12 [305] TYPA

6 [152]

LID SWING

1/4" NPT GAUGEPORT, HIGH

1/4" NPTVENT PORT

PRESSURE

C

34 [864]

B18 [458]D

INLET

1/4" NPT GAUGEPORT, LOWPRESSSURE

2-WAY BALL VALVEFOR ISOLATION

LIDHANDLE

INLET

OUTLET

1/2" NPTDRAIN PORT

E

OUTLET

3 [76]

858 [219]

14 [355] TYP

Models

No. of

filter bags Size

Flow rates1

GPM (m³/h)



Max. pressure psi (bar)

Max. temp.2 °F (°C)

I/O connections

Dimensions - in (mm)

A B C D E

M-TBF-0202 2 2 353 (80) 16.5 (62.5) 320 (145.1) 150 (10) 400 (160) 3” flange 24 (610) 23 (584) 7-3/4 (197) 24-3/16 (614) 47-1/2 (1,207)

M-TBF-0302 3 2 528 (120) 25.7 (104.9) 490 (222.3) 150 (10) 400 (160) 4” flange 36 (914) 35 (889) 8-1/4 (210) 24-11/16 (627) 48 (1,219)

M-TBF-0402 4 2 705 (160) 35 (132.5) 630 (285.8) 150 (10) 400 (160) 4” flange 48 (1,219) 47 (1,194) 8-1/4 (210) 24-11/16 (627) 48 (1,219)

M-TBF-0502 5 2 881 (200) 54.2 (205.2) 800 (362.9) 150 (10) 400 (160) 6” flange 60 (1,524) 59 (1,499) 9-5/16 (236) 25-3/4 (654) 49-1/16 (1,246)

M-TBF-0602 6 2 1,057 (240) 65.5 (248) 950 (430.9) 150 (10) 400 (160) 6” flange 72 (1,829) 71 (1,803) 9-5/16 (236) 25-3/4 (654) 49-1/16 (1,246)

M-TBF-0702 7 2 1,233 (280) 76.7 (290.3) 1,100 (499) 150 (10) 400 (160) 6” flange 84 (2,134) 83 (2,108) 9-5/16 (236) 25-3/4 (654) 49-1/16 (1,246)

M-TBF-0802 8 2 1,409 (320) 86 (325.6) 1,250 (567) 150 (10) 400 (160) 6” flange 96 (2,438) 95 (2,413) 9-5/16 (236) 25-3/4 (654) 49-1/16 (1,246) 1 Maximum theoretical flow based on water viscosity, filter bag specific. 2 Depending on seal material. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.

Dimensions for MODULINE multi-bag filter housing using TOPLINE single bag filter housingsDetails on MODULINE multi-bag filter housing assemblies using SIDELINE and FLOWLINE single bag filter housings available on request.

Technical data MODULINE systems with TOPLINE housings

Dimensions in inches

0.1

.03

.04

.07

.11

.14

.19

.25

.30

.37

.45

pre

ssu

re d

rop

, b

ar

0.1

0.2

0.4

0.6

1.0

1.6

2.1

2.8

3.6

4.4

5.3

6.5

pre

ssu

re d

rop

, p

si

flow rate gpm, per housing0 6020 40

75 150 225 300 375 450

80 100 120

Flow vs. Pressure DropFor single housing,without media

flow rate L/min, per housing

USEF-FBH-16

10-2014

Mechanically Cleaned Filters & Strainer///////////////////////TECHNICAL INFORMATION Bag Filter Housings

Bag filter housing specification codes

V MBF 04 02 AS 10 040 A U T S E N M11

RangesEBF: ECOLINE™ FBF: FLOWLINE™SBL: FLOWLINE II™*PBF: POLYLINE™SBF: SIDELINE™TBF: TOPLINE™MBF: MAXILINE™ DomeMDE: MAXILINE™ FlatPMBF: PROLINE™*

OptionsD: DUOLINE™M: MODULINE™

Number of filter bags 1, 2, 4, 8, 12, 16, 20, 24

Pressure ratings06: 90 psi

(6 bar)07: 100 psi

(7 bar)09: 135 psi

(9 bar)10: 150 psi

(10 bar)16: 225 psi

(16 bar)21: 300 psi

(21 bar)

Filter bag sizes01: Ø 7 x 17” L

(180 x 430 mm)02: Ø 7 x 32” L

(180 x 810 mm)03: Ø 4 x 9” L

(100 x 230 mm)04: Ø 4 x 15” L

(100 x 380 mm)

Connection typesA: ANSI flangeN: NPT female threadR: Tri-clampB: BSP femaleC: BSP maleD: DIN flangeT: Tri-clamp (DN)I: Milk pipe threadW: Butt-weldJ: JIS flangeS: SMSU: MaconL: RJTM: Other

Special outletT: Tangental

Special M: Special

MaterialsAB: SS 316 (1.4401)AC: SS 316 Ti (1.4571)AD: 1.4408 + 1.4571AE: 1.4408 + 316 LAF: 1.4408AS: SS 316L (1.4404) BB: SS 304 (1.4301)BS: SS 304L (1.4306)CS: Carbon steelHB: HASTELLOY® C276HC: HASTELLOY C22HD: HASTELLOY C4PF: PVDFPO: PolypropylenePV: PVCUR: UranusTI: Titanium

Inside finishes (1st number) : Stainless steel0: Pickled1: Glass bead-blasted2: Electro-polish standard3: Food grade polished4: Pharma grade polish5: Halar® coated6: End user spec7: Anti-stick code

Outside finishes (2nd number) : Carbon steel0: Brushed/oiled1: Glass bead-/sand-blasted2: Primed3: Paint ES-3014: Epoxy coated5: Halar coated6: End user spec7: Anti-stick code

Connection sizesFor A, N, R: 005: 1/2”010: 1”012: 11/4”015: 11/2”020: 2”up to 140: 14”

For B, D, T, I, W, J, S:025: DN 25050: DN 50080: DN 80100: DN 100125: DN 125150: DN 150200: DN 200250: DN 250350: DN 350

CodestampsM: UM StampU: U StampX: CE Stamp

Closure stylesB: Eye-bolts/ringnutsC: Stut-bolts/ringnutsD: Stut-bolts/hexnutsE: Speed bar knobsG: Segment clampH: Swingbolts/hexnutsR: Ratchet closureS: QIC-LOCKV: V-clamp

Lid lift styleA: Davit hydraulicC: Counter balanceD: Davit manualE: Spring assistH: HydraulicO: ManualP: Gas springS: David spring assist

SpecialsF: Full heating jacketH: Heating jacketN: Without jacketT: Total heating jacket

– – – – – – –

All the information necessary to understand a Eaton bag filter housing description code is listed above. The example description listed, a D-VMBF-0402-AS10-040A-UT-11SEN-M is for a duplex MAXILINE 4 filter bag housing for 7 x 32” L (180 x 810 mm) filter bags, constructed of 316L (1.4404) stainless steel, rated at 150 psi (10 bar), with 4” ANSI flange inlet/outlets. It carries an ASME “U” code stamp and has a tangential outlet. The housing has a glass bead-blasted finish both inside and outside, has a QIC-LOCK opening mechanism, a spring-assisted cover lifter, does not have a heating jacket and is a “special” design.

* Available in the US only. HASTELLOY® is a registered trademark of Haynes International Inc. Halar® is a registered trademark of Solvay Group.

D –

OptionsT: T-boltV: QIC-LOCK™










8

Mechanically Cleaned Filters & Strainer////////////////////////TECHNICAL INFORMATION Bag Filter Housings

Applications

Special applicationsThe engineers at Eaton can adapt any of our filtration products for special applications. Custom fabricated skid systems can be engineered to your exact specifications.

Contact Eaton and let us know about your special needs. E-mail us at [email protected]

MBF/MDE VMBF/VMDE

Coarse filtration > 500 µm � � � � � � � � � �

Medium filtration > 10 µm � � � � � �

Fine filtration < 10 µm � � � �

Pre-filtration � � � � � � � � � � �

Safety filtration � � � � � �

High volume � � � �

Batch filtration � � � � � � �

Circuit filtration � � � � � �

Continuous filtration �

Solvents, paints � � � � �

Fats and oils � � � � � � �

Catalyst, activated carbon �

Acids, bases � � � � � � �

Petrochemicals � � � � � � �

Water, waste water � � � � � � � � � � �

Chemical industry � � � � � � �

Pharmaceuticals �

Metal cleaning � � � � � � � �

Automotive � � � � �

Electronics � �

Food and beverage � �

Paint and lacquer � � � � � �

Water treatment � � � � � � � � � � �

Galvanic industry � � �

ECOLINE™

FLOWLINE™

FLOWLINE II™*

SIDELINE™

TOPLINE™

MAXILINE™

PROLINE™*

POLYLINE™

DUOLINE™

MODULINE™

The FloWash™ basic filter cart is an easy-to-deploy mobile system that helps keep your shop floor fluids cleaner for improved production efficiency. It can be used on-line or as a stand-alone filter station. Save on replacement fluids and the associated disposal costs.

Eaton custom fabricates filter skids in a variety of metals can be configured with pumps, automated valves, control packages, etc. Fabricated filtration systems are engineered to fit the exact requirements of the application, using single or multi-bag filter housings and automated self-cleaning systems.

* Available in the US only.

USEF-FBH-18

10-2014

11

10

01

09

07

0403

05

02

06

08

The wide range of Eaton filter housing accessories makes it possible to custom design a housing to the exact specifications of your application, no matter how

complex or unique it may be.

Accessories also can be used to improve application processes or requirements. For example, displacement

balloons make filter bag change-outs easier, and LOFNETIC magnetic inserts extend filter bag lifetime in applications where magnetic particles are encountered.

Original Eaton “added value” accessories are guaranteed to work with your Eaton bag filter housings to deliver the highest performance and reliability.

Original Eaton accessories, consumables and spare parts for safety and reliability

///////////////////////TECHNICAL INFORMATION Bag Filter Housing Accessories










8

Restrainer basketsHeavy-duty, electro-polished SS 316, perforated plate baskets (included with housing) allow use of filter bags and HAYFLOW™ filter elements up to differential pressures of 36 psi (2.5 bar). Available in all standard sizes, fitting all Eaton bag filter housings. Specially designed restrainer baskets, including construction options such as HASTELLOY® or Epoxy coated, are available. Standard baskets can be used in combination with adaptor rings for retrofitting other types of housings.

LOFNETIC magnetsMagnet assemblies are inserted into the filter bag during filtration. They are a combination of bag positioner fitted in the center with a magnetic bar(s). Filter bag lifetime is extended by retaining magnetic particles, such as chips and fines, preventing deposition onto the filter media. They also retain finer magnetic dust when using filter bags with coarser retention rating. LOFNETIC magnets are available in size 01 and 02 filter bags using one or two SS 316-covered magnetic bars.

Insertion toolsHighly recommended for all installations and mandatory for some, insertion tools ensure correct positioning of the filter bag within the basket and eliminate any “bobbing” movement of the filter bag caused by uncontrolled back pressure. This avoids any chance of the filter bag bursting. ACCUGAF™, PROGAF™ and LOFCLEAR™ 500 filter bags need to be equipped with an insertion tool. A special, new collar design firmly fixes the insertion tool inside the filter bag during filtration. They are available in sizes 01 and 02.

Leg assembliesHeight-adjustable leg assemblies are standard for size 01 and 02 TOPLINE™, FLOWLINE™ and SIDELINE™ single bag filter housings and are optional for ECOLINE™ single bag filter housings. Wall mounting brackets are also available.

Displacement balloonsInserting a displacement balloon inside the filter bag minimizes the amount of residual liquid present in the filter bag and reduces product loss. This eases the changing of the filter bag, eliminating the need for expensive, pressure-aided draining systems. A special, new collar design firmly positions the balloon inside the filter bag. The SS 316 balloons’ maximum Δp is 230 psi (15.9 bar). They are available in sizes 01 and 02.

Manifold modulesEaton standard pipe modules are available in SS 316. 90° elbows, flange reductions, flanged “T” sections and flange manifolds can be easily assembled to make DUOLINE™ or MODULINE™ mulit-bag filter housings based on FLOWLINE*, SIDELINE or TOPLINE size 01 or 02 single bag filter housings.

Adapter heads for open filtrationUsed in conjunction with SNAP-RING® filter bags in gravity feed, open systems. Adapter heads are available in SS 316 and polypropylene with a 1.5” NPT (BSP) connection for pressures to 20 psi (1.4 bar).

Gaskets and O-ring sealsAs standard, Eaton metal bag filter housings are fitted with Buna-N® O-rings. Plastic housings have Viton® O-rings. Other material options, such as EPDM, Viton, PTFE encapsulated Viton or silicone rubber, are available as flat gaskets. The options offer a variety of chemical and thermal resistances to meet a multitude of uses and applications.

Mesh strainersBag filter housings may be fitted with SS 316 mesh lined strainers in place of baskets to convert them to strainer filters. Mesh strainers are available in four standard sizes: 01, 02, 03 and 04. Retention ratings are 25, 50, 100, 150, 250, 400 and 800 µm, respectively.

Hold-down ringsECOLINE, SIDELINE, FLOWLINE, POLYLINE™ and MAXILINE™ MBF bag filter housings are fitted with different hold-down rings (included with housing). They hold the filter bag securely inside the restrainer basket, which in turn is positioned correctly within the housing.

MiscellaneousGauges, vents, eye-bolts, clamp-screws, V-clamps, center-bolts, butterfly and ball valves are all available as accessories or spare parts to fit Eaton’s various bag filter housings. * Available in the US only. HASTELLOY® is a registered trademark of Haynes International Inc. Viton® is a registered trademark of E. I. du Pont de Nemours and company.

03

02

01 07

04

08

09

10

11

06

05SPLASH GUARD option for added safety

• Helps protect operators from unexpected pressurized spray and discharge

• Reduces operator exposure to potentially hazardous material

• Provides additional eye and face protection

USEF-FBH-19

10-2014

Mechanically Cleaned Filters & Strainer////////////////////////TECHNICAL INFORMATION Bag Filter Housing Accessories

solving your need for greater filtration efficiency€¦ · catalyst recovery, removal of pipe...

Documents