Software flash tool ODIN

Software flash tool ODIN

How to Flash a firmware with ODIN Download one of the firmwares from below.If you already have a firmware, you can download the Ancora.OPS and the Odin Multi Downloader v4.43.exe from Other.

Mobile handling procedure for firmware updateWhile switched off, keep the following buttons pressed. Release the power-button once the Samsung Galaxy W(I8150) is switched on.

ContinuedAs soon as the screen with the exclamation mark appears hit the Volume up-button. Now you should be in the download mode.Connect your device to the Computer. Note: In order that your Samsung Galaxy W to be detected by ODIN, you will have to install the drivers manually or install Kies (Kies can be uninstalled right after, if prefered, because the drivers will remain in the system). Make sure Kies is not running in the task-manager, while using ODIN.

INFO: The download-mode is being used to flash firmwares, without using the official method of Samsung Kies. This should be reachable even if you have a corrupted firmware installed.

Odin InstallationOpen Odin Multi Downloader v4.43.exe . INFO: Use ODIN Multi Download v.4.43, I reported some issues with lower versionsClick on the OPS-Button and select the Ancora.ops file.Set up the settings as followsmark the option: One Package, Protect OPS, Auto Rebootunmark the option: Reset Time (Sec)

ContinuedClick on the One Package-Button and select the downloaded MD5-file.Click on the Start-Button. Flashing takes around 10-15 minutes. The first start up takes up to 5 min., so please don't panic and don't press anything until the home screen appears!

NotificationMaybe it is more secure to make a full wipe using ClockWorkMod.

The reason why these complicated steps might be necessary: Because your system most likely be a mess, if you were flashing all different kinds of firmwares. To make sure your device is not an overwritten old firmware these steps are necessary.Flashing firmwares via ODIN does not delete all old data !!!

Use this course of action:

1. Backup everything manually what you can!

2. If you have not already installed ClockWorkMod, use the flash instruction from above and download the ClockWorkMod from the section Other.

3. Once ClockWorkMod is flashed, go to the Recovery Mode(which is the ClockWordMod):a) backup and restore -> backup to external sdcardb) backup and restore -> restore from external sdcardThis is to make sure the files aren't corrupted, if this is successful you can be sure everything is backupped. If you get a MD5 mismatch something went wrong. Try again!c) wipe data/factory reset -> confirmd) wipe cache partition -> confirme) mounts and storage -> format system -> confirmf) mounts and storage -> format cache -> confirmg) mounts and storage -> format data -> confirm

4. You restart your phone in Download Mode and flash a firmware using this instruction, which is provided in the thread under Firmwares.

5. Now you will have to flash again the ClockWorkMod recovery to restore your data.

Note: But this is only possible if the previous firmware is compatible with the current one. Most custom ROMs aren't compatible with the stock ROMs or other custom ROMs!

Than open ClockWorkMod Recovery and:

backup and restore-> advanced restore from external sdcard -> select the backup -> Restore data -> confirm.

Now if you want the stock recovery back(needed for OTA updates) instood of ClockWorkMod, than go to Other and select the stock recovery, and flash it on your device.

6. Now you should have a fresh device like you have never flashed before!!!