Energy Technologies, Inc.

Remote CommunicationsInterface Capabilities

Click your mouse to

advance to the next slide

Press “Esc” key to exit

Various Communications Capabilities are available:

• Contacts• RS232 • Telnet• HTTP/HTTPS • SNMP

Standard RS232 Features & Software Options

• Contact Closure

• RS232 Menu

- ES1 Status Reports - Battleshort On/Off

- Shutdown - Help Info

RS232 Interface• AC failure alarm.

• Low battery alarm

• Temperature

I. Warm Internal Alarm

II. Hot Internal Alarm

III. Warm External Alarm

IV. Hot External Alarm

RS232 InterfaceSwitchable between User (default) & Programming.

• User Interface features:

                      i.      Non case sensitive commands.

                      ii.      UPS Status, “ES1” command

AC Fail, Low Battery, Fan Fail, Shutdown, Warm, Hot, Temperature in Celsius and % Humidity (optional)

                      iii.      Shutdown

                      iv.      Software Version, “SW1”

                       v.      Help menu, “HELP”

                       vi.      Set Hot Fail Delay Time to customer specifications.

• Programming Interface.

                        Allows re-programming of firmware for updates.

SNMP Features• HTML and SNMP interface via 100/10-BaseT

Ethernet connections.

• Uses industry standard “UPS” MIB RFC1628.

• ETI’s NPM.MIB

Standard MIB vs ETI’s NPM.MIBWhile the standard MIB includes many features, ETI’s Network Power Management (NPM) MIB includes many extended and enhanced UPS Controls

Standard MIB vs ETI’s NPM.MIBFeatures of the Standard MIB

• AC Fail Indicator

• Low Battery Indicator

• Temperature reading in Celsius/Fahrenheit

• Shutdown Outlets or System

• Remote PC/Workstation shutdown software available.

SNMP Console commands:

• Available from both TELNET and RS-232

• Set IP Address, Mask, Time and Date

• Control individual outlets on and off

Standard MIB vs ETI’s NPM.MIB

- Standard MIB - NPM.MIB Features

SNMP TRAPS reporting available:

• coldStart• upsAlarmTempBad• upsAlarmShutdownImminent• upsAlarmShutdownPending• upsAlarmLowBattery

SNMP TRAPS reporting available:

• paTrapReceptacleStatus (Status)• paTrapReceptacleTimeToGo (Timers)• paTrapAlarmID (Contact, Temperature, Humidity Alarms)• paTrapCommunicationLost 

Standard MIB vs ETI’s NPM.MIB- NPM.MIB Features

• Individual Outlet Control—up to 16 outlets:

• On • Off • Cycle• On /Off by Action Timer• On /Off by Default Timer• Outlet Sequencing by AC Timer on• Outlet Shedding (at AC FAIL) by AC Timer off

• All Outlet Control:

• Contact Closure Monitoring

• 4 sets of contacts• Hot/Warm • Fan Fail

• On • Off • Cycle• On /Off by Action Timer• On /Off by Default Timer

Standard MIB vs ETI’s NPM.MIB- NPM.MIB Features

Temperature:

• Sensors located internally and/or externally

• Readings in Fahrenheit/Celsius

• User definable Upper and Lower thresholds

• Threshold alarms to SNMP & HTML

Humidity:

• Sensors located internally and/or externally

• Readings in “Temperature Compensated Percent Humidity”

• User definable Upper and Lower thresholds

• Threshold alarms to SNMP & HTML

SNMP TRAPS

SNMP Console commands.

SNMPConsole

Commands

SNMPConsole

Commands

SNMPConsole

Commands

Monitoring and Control with Simple Network

Management Protocol(SNMP)

Our SMNP option offers sophisticated intelligent control

to assist in managing your vital power equipment

during combat scenarios.

Simple Network Management Protocol

brings your systems to your fingertips. Locally or remote:

• Monitoring

• Managing

• Configuring

• Battleshort

• Current and Voltage measurements (Available)

Monitoring Status of:

• Grid, UPS and attached loads/equipment

• Digital status (open/closed, on/off, hi/low) of alarms, switches, breakers, etc

• Analog electrical parameters can include voltage, current, frequency, wattage, power factor

• Analog environmental parameters can include temperature & humidity of site and monitored equipment

Managing

• Power output connectors: utilizing TCP/IP protocol

• Alarm reset of monitored parameters

• Temperature override of UPS alarms

Configuring

• Bridge, IP gateway, host power alarm routing

• UPS shutdown parameters

• Configure traps

• Agent properties

• Alarm history files

UPS Monitoring

UPS Management

Network Power Management (NPM):ETI’s Extended UPS Controls

NPM

SNMP Management

SNMP TRAPS reporting available

coldStartupsAlarmTempBadupsAlarmShutdownImminentupsAlarmShutdownPendingupsAlarmLowBattery

UPS History

UPS History

Future ETI SNMP Offerings: ETI.MIB

1. Broadcasting maintenance messages and emails.

2. Alarm Breakdown

3. Warranty Tracking

4. Serial Number checking