Download - SNMP: Remote Interface Capabilities
Energy Technologies, Inc.
Remote CommunicationsInterface Capabilities
Click your mouse to
advance to the next slide
Press “Esc” key to exit
Standard RS232 Features & Software Options
• Contact Closure
• RS232 Menu
- ES1 Status Reports - Battleshort On/Off
- Shutdown - Help Info
RS232 Interface• AC failure alarm.
• Low battery alarm
• Temperature
I. Warm Internal Alarm
II. Hot Internal Alarm
III. Warm External Alarm
IV. Hot External Alarm
RS232 InterfaceSwitchable between User (default) & Programming.
• User Interface features:
i. Non case sensitive commands.
ii. UPS Status, “ES1” command
AC Fail, Low Battery, Fan Fail, Shutdown, Warm, Hot, Temperature in Celsius and % Humidity (optional)
iii. Shutdown
iv. Software Version, “SW1”
v. Help menu, “HELP”
vi. Set Hot Fail Delay Time to customer specifications.
• Programming Interface.
Allows re-programming of firmware for updates.
SNMP Features• HTML and SNMP interface via 100/10-BaseT
Ethernet connections.
• Uses industry standard “UPS” MIB RFC1628.
• ETI’s NPM.MIB
Standard MIB vs ETI’s NPM.MIBWhile the standard MIB includes many features, ETI’s Network Power Management (NPM) MIB includes many extended and enhanced UPS Controls
Standard MIB vs ETI’s NPM.MIBFeatures of the Standard MIB
• AC Fail Indicator
• Low Battery Indicator
• Temperature reading in Celsius/Fahrenheit
• Shutdown Outlets or System
• Remote PC/Workstation shutdown software available.
SNMP Console commands:
• Available from both TELNET and RS-232
• Set IP Address, Mask, Time and Date
• Control individual outlets on and off
Standard MIB vs ETI’s NPM.MIB
- Standard MIB - NPM.MIB Features
SNMP TRAPS reporting available:
• coldStart• upsAlarmTempBad• upsAlarmShutdownImminent• upsAlarmShutdownPending• upsAlarmLowBattery
SNMP TRAPS reporting available:
• paTrapReceptacleStatus (Status)• paTrapReceptacleTimeToGo (Timers)• paTrapAlarmID (Contact, Temperature, Humidity Alarms)• paTrapCommunicationLost
Standard MIB vs ETI’s NPM.MIB- NPM.MIB Features
• Individual Outlet Control—up to 16 outlets:
• On • Off • Cycle• On /Off by Action Timer• On /Off by Default Timer• Outlet Sequencing by AC Timer on• Outlet Shedding (at AC FAIL) by AC Timer off
• All Outlet Control:
• Contact Closure Monitoring
• 4 sets of contacts• Hot/Warm • Fan Fail
• On • Off • Cycle• On /Off by Action Timer• On /Off by Default Timer
Standard MIB vs ETI’s NPM.MIB- NPM.MIB Features
Temperature:
• Sensors located internally and/or externally
• Readings in Fahrenheit/Celsius
• User definable Upper and Lower thresholds
• Threshold alarms to SNMP & HTML
Humidity:
• Sensors located internally and/or externally
• Readings in “Temperature Compensated Percent Humidity”
• User definable Upper and Lower thresholds
• Threshold alarms to SNMP & HTML
Our SMNP option offers sophisticated intelligent control
to assist in managing your vital power equipment
during combat scenarios.
Simple Network Management Protocol
brings your systems to your fingertips. Locally or remote:
• Monitoring
• Managing
• Configuring
• Battleshort
• Current and Voltage measurements (Available)
Monitoring Status of:
• Grid, UPS and attached loads/equipment
• Digital status (open/closed, on/off, hi/low) of alarms, switches, breakers, etc
• Analog electrical parameters can include voltage, current, frequency, wattage, power factor
• Analog environmental parameters can include temperature & humidity of site and monitored equipment
Managing
• Power output connectors: utilizing TCP/IP protocol
• Alarm reset of monitored parameters
• Temperature override of UPS alarms
Configuring
• Bridge, IP gateway, host power alarm routing
• UPS shutdown parameters
• Configure traps
• Agent properties
• Alarm history files
SNMP TRAPS reporting available
coldStartupsAlarmTempBadupsAlarmShutdownImminentupsAlarmShutdownPendingupsAlarmLowBattery