smc product workbook

SEATTLE MANUFACTURING CORPORATION

PRODUCT COMPARISON

1.800.426.6251 | smc gear.net

S E AT T L E M A N U FA C T U R I N G C O R P O R AT I O N | SINCE 1967

1

MINIMUM BREAKING STRENGTH – 3 SIGMA TESTThe minimum Breaking Strength (MBS) of all SMC products are calculated using the 3 Sigma Rating system which indicates that 99.87% of the products tested will break at values above the published MBS. All breaking strengths reported in this product catalog and on SMC equipment are calculated using this method.

PIN TO PIN VS. SYSTEM STRENGTHStandards such as NFPA, ANSI, CE and UIAA prescribe various types of test methods; some of them are intended to test the system strength and others are designed to test the device only. The “system strength” method tests the device as it interacts with rope, webbing or other applicable equipment. The “pin to pin” method tests the device strength only by loading the device between two polished steel pins and slowly pulled to failure.

When comparing device minimum breaking strengths, the user needs to be certain which test methods have been applied as the results can be signi� cantly di� erent from one to the other and o� en misleading. For example, a rescue descender used with lightweight, small diameter rope will have a lower system strength than the same descender used with a heavyweight, larger rope. In addition, the pin to pin method on this same device will provide another MBS altogether. As such, the user can be misinformed if the source and method of testing is not adequately understood.

Many of the standards are written to test the system strength rather than the pin to pin strength. This is important because the system is only as strong as the weakest link and when using the device in the � eld, the user needs this information to make good gear choices for their application. When it is not practical to test in a system due to so many variables or when variables can signi� cantly alter the e� ect of the test, the pin to pin method is used.

MARKING OF STANDARD STRENGTH VS ACTUAL STRENGTHWhen a device is certi� ed to a standard, the minimum breaking strength required to meet the standard is marked on all SMC devices. If the actual breaking strength (still tested per the standard) is signi� cantly greater than the minimum required strength, SMC may also mark the device with the actual strength information. For example, the large rescue carabiner meets the NFPA G rating of 40kN MBS, but the actual MBS is 46kN. SMC marks both of these results on the carabiner.

Please note that SMC does not mark a device with the pin to pin results (which is o� en greater than the system strength) unless it is the method required by the standard. For example, the rescue descender may break at 150% of the rated strength when pulled pin to pin. Per the standards, however, SMC will only mark the more realist, but lower system strength, on the device.

1.800.426.6251 | smc gear.net


2

ITEM # DESCRIPTION MATERIAL COLOR(s) L x W (inches) WEIGHT GATE OPEN (inches)

MAJOR AXIS

MINOR AXIS OPEN RATING(s)

11803Captive Eye Keeper

Small Stainless

Steel Bright 1.95 x .52

0.15 oz.

4.2g .58 NA NA NA

11804Captive Eye Keeper

Large Stainless

Steel Bright 2.05 x .66

0.17 oz.

4.8g0.67 NA NA NA

170xx Light D Aluminum

Bright (01)Black (02)Purple (03)Orange (04)

Red (05)

3.96 x 2.211.7 oz.

48g0.74

4496 lbf.

20 kN

1798 lbf.

8 kN

1124 lbf.

5 kN–

180xx Mountain D Aluminum


Red (05)

4.37 x 2.562.4 oz.

68g0.95

6070 lbf.

27 kN

1574 lbf.

7 kN

1574 lbf.

7 kN–

185xx Locking D Aluminum


Red (05)

4.37 x 2.562.6 oz.

74g0.82

6070 lbf.

27 kN

1574 lbf.

7 kN

1574 lbf.

7 kN–

190xx Oval Carabiner Aluminum Bright (01)Black (02)

4.26 x 2.212.2 oz.

63g0.71

4496 lbf.

20 kN

1574 lbf.

7 kN

1349 lbf.

6 kN–

250xx Large Aluminum Locking Aluminum Bright (01)Black (02)

5.04 x 2.973.8 oz.

108g1.2

7643 lbf.

34 kN

2473 lbf.

11 kN

2248 lbf.

10 kN–

Aluminum Carabiners

1.800.426.6251 | smc gear.net


3


MAJOR AXIS


NFPA1030xx Kinetic Screw Lock Aluminum Blue (00)

Orange (04)Black (07)

4.57 x 2.832.8 oz.

79g0.98

6294 lbf.

28 kN

2023 lbf.

9 kN

1798 lbf.

8 kNNFPA-T

NFPA1031xx Kinetic Twist Lock Aluminum Blue (00)

Orange (04)Black (07)

4.57 x 2.853.2 oz.

91g0.98

6294 lbf.

28 kN

2023 lbf.

9 kN

1798 lbf.

8 kNNFPA-T

NFPA185xx Locking D Aluminum Bright (01)Black (02)Red (05)

4.37 x 2.562.6 oz.

74g0.82

6070 lbf.

27 kN

1574 lbf.

7 kN

1574 lbf.

7 kNNFPA-T

NFPA2055xx Crossover, Screwlock Aluminum Pewter (00)Black (07)

5.53 x 3.345.1 oz.

145g1

8992 lbf.

40 kN

3597 lbf.

16 kN

4046 lbf.

18 kNNFPA-G

NFPA2056xx Crossover, Dual-lock Aluminum Pewter (00)Black (07)

5.53 x 3.355.5 oz.

156g1

8992 lbf.

40 kN

3597 lbf.

16 kN

4046 lbf.

18 kN

NFPA-G

ANSIZ359.1 (07)

NFPA2057xx Crossover, Tri-lock Aluminum Pewter (00)Black (07)

5.53 x 3.355.5 oz.

156g1

8992 lbf.

40 kN

3597 lbf.

16 kN

4046 lbf.

18 kN

NFPA-G

ANSIZ359.1 (07)

NFPA Aluminum Carabiners

1.800.426.6251 | smc gear.net


4

Large Steel Carabiners


MAJOR AXIS


240xx Large Stainless Locking Stainless

Steel Bright (01)Black (07)

5.04 x 2.9710.9 oz.

309g1.2

10341 lbf.

46 kN

4046 lbf.

18 kN

2473 lbf.

11 kN–

NFPA20003 X-Large Steel Locking Steel Bright 5.7 x 3.512.2 oz.

346g1.45

12139 lbf.

54 kN

2922 lbf.

13 kN

3147 lbf.

14 kNNFPA-G

NFPA210xx Large Steel Locking Steel Bright (01)Black (07)

5.04 x 2.9710.6 oz.

300g1.2

10341 lbf.

46 kN

3597 lbf.

16 kN

2473 lbf.

11 kNNFPA-G

NFPA21002 Large Heat-Treated Steel Steel Bright 5.04 x 2.9710.6 oz.

300g1.2

14612 lbf.

65 kN

3597 lbf.

16 kN

4046 lbf.

18 kNNFPA-G

NFPA21501 ANSI Safety Lock Steel Bright 5.04 x 2.9711.5 oz.

325g1.2

10341 lbf.

46 kN

3597 lbf.

16 kN

2473 lbf.

11 kN

NFPA-G

ANSI Z359.12 (09)

1.800.426.6251 | smc gear.net


5

Lite Steel Carabiners


MAJOR AXIS


1000xx Lite Stainless Lite Stainless


4.52 x 2.766 oz.

170g0.94

7418 lbf.

33 kN

2248 lbf.

10 kN

1798 lbf.

8 kN–

NFPA1000xx Lite Alloy Steel Lite Alloy


4.52 x 2.766.6 oz.

187g0.94

10116 lbf.

45 kN

2697 lbf.

12 kN

2473 lbf.

11 kNNFPA-G

NFPA102100 ANSI FP Lite Alloy Lite Alloy

Steel Bright 4.61 x 2.91

9 oz.

255g1

10116 lbf.

45 kN

3600 lbf.

16 kN

2473 lbf.

11 kN

NFPA-G

ANSI Z359.12 (09)

NFPA102200 Lite Alloy DualGuard Lite Alloy


7 oz.

199g0.88

10116 lbf.

45 kN

2697 lbf.

12 kN

2473 lbf.

11 kNNFPA-G

NFPA102300 Lite Alloy TriGuard Lite Alloy


7 oz.

199g0.88

10116 lbf.

45 kN

2697 lbf.

12 kN

2473 lbf.

11 kNNFPA-G

1.800.426.6251 | smc gear.net


6

ITEM # DESCRIPTION MATERIAL COLOR(s) L x W (inches)

THICK (inches) WEIGHT MBS BECKET:

Pin to Pin BEARING TYPE SHEAVE (dia in)

TREAD (dia in)

ROPE(dia mm) RATING

NFPA1305002” SMC/RA

Aluminum Single Aluminum Green 4.6 x 2.5 1.34

6.3 oz.

179g

6070 lbf.

27 kN– Ball Bearing 2 1.48 13 NFPA-T

147000 Swiftwater Aluminum Red/Black 4 x 3 1.3756 oz.

170g

7786 lbf.

34 kN– Ball Bearing 2 1.48 13 –

1573xxCRx

Crevasse Rescue

Aluminum Blue (00)

Orange (03)2.67 x 1.74

1.061.8 oz.

52g

4946 lbf.

22 kN– Delrin 1.2 0.82 13 –

159500TR

Technical Rescue

Aluminum Green 3 x 1.75 1.072.3 oz.

66g

5845 lbf.

26 kN– Oilite Bushing 1.2 0.82 12 –

1596xx JR Pulley Aluminum Blue (00)Black (02)

2.84 x 1.75

1.563.2 oz.

89g

4946 lbf.

22 kN– Delrin 1.2 0.82 9 –

1597xx JRB Pulley Aluminum Blue (00)Black (02)

3.57 x 1.75

1.563.3 oz.

94g

4946 lbf.

22 kN

2298 lbf.

13 kNDelrin 1.2 0.82 9 –

Aluminum Pulleys

1.800.426.6251 | smc gear.net


7




TREAD (dia in)

ROPE(dia mm) RATING

NFPA1527xx2” PMPSingle

Aluminum Green/Black (00)

Black (01)3.97 x 2.9 1.37

6.3 oz.

179g

8093 lbf.

36 kN– Ball Bearing 2 1.48 13 NFPA-G

NFPA1528xx2” PMPDouble

Aluminum Green (00)Black (01)

5.1 x 2.9 2.210.4 oz.

295g

10341 lbf.

46 kN

5170 lbf.

23 kNBall Bearing 2 1.48 13 NFPA-G

NFPA1530xxMicro PMP

Single Aluminum

Red/Grey (00)Black (01)

3.75 x 2.55

1.123.5 oz.

99g

4946 lbf.

22 kN– Ball Bearing 1.37 1 13 NFPA-T

NFPA1540xxMicro PMP

Double Aluminum

Gold (00)Black (01)

4.65 x 2.55

1.815.8 oz.

164g

8992 lbf.

40 kN

4496 lbf.

20 kNBall Bearing 1.37 1 13 NFPA-T

NFPA1580003” PMPSingle

Aluminum Red/Grey5.85 x 4.17

1.3812.5 oz.

354g

8542 lbf.

38 kN– Ball Bearing 2.97 2.46 13 NFPA-G

NFPA1585003” PMPDouble

Aluminum Gold 7.1 x 4.17 2.220.8 oz.

590g

10790 lbf.

48 kN

6744 lbf.

30 kNBall Bearing 2.97 2.46 13 NFPA-G

Aluminum Pulleys, continued

(PMP) Prusik-Minding-Pulley: Common in rope rescue. The rope to be pulled is passed through a pulley, and a Prusik is tied on the loaded side. When the rope is pulled, the Prusik rides against the pulley, and the rope slides through it; but when the rope is relaxed, the Prusik slides away from the pulley and grabs the rope. Thus, the combination acts as a ratchet.

1.800.426.6251 | smc gear.net


8




TREAD (dia in)

ROPE(dia mm) RATING

NFPA154801Advance Tech

Mate Aluminum Orange 2.97 x 2.4 1.81

5.44 oz.

154g

7643 lbf.

34 kN– Ball Bearing 1.37 1.0 7 - 12.5 NFPA-T

NFPA154900Advance Tech

HX Aluminum Orange

5.08 x 2.74

1.979.52 oz.

270g

7643 lbf.

34 kN

4046 lbf.

18 kNBall Bearing 1.37 1.0 7 - 12.5 NFPA-T




TREAD (dia in)

ROPE(dia mm) RATING

NFPA125500Kootenay HX

KPP Aluminum Gold/Black

8.67 x 4.34

3.426.4 oz.

750g

8542 lbf.

38 kN– Ball Bearing 3.455 2.21 – NFPA-G

156302 Shuttle Rope Aluminum Blue4.25 x 3.21

1.075.7 oz.

162g

5845 lbf.

26 kN– Ball Bearing 1.32 0.99

13Rope

–

156303 Shuttle Cable Aluminum Orange4.25 x 3.21

1.078 oz.

227g

5845 lbf.


13Cable

–

156304Shuttle Xtreme

Aluminum Green4.25 x 3.21

1.227.6 oz.

215g

5845 lbf.


13Cable

–

Progress Capture Pulleys (PCP)

Specialty Pulleys

1.800.426.6251 | smc gear.net


9

Stainless Steel Pulleys




TREAD (dia in)

ROPE(dia mm) RATING

NFPA150xxx2” SMC/RA

Single Stainless

Steel Bright 4.6 x 2.5 1.4

8.6 oz.

244g

6519 lbf.

29 kN–

Oilite Bushing (000)

Ball Bearing (500)2 1.48 13 NFPA-T

NFPA1510003” SMC/RA

Single Stainless


16 oz.

454g

11465 lbf.

51 kN– Oilite Bushing 3 2.34 16 NFPA-G


Single Stainless


23 oz.

652g

11465 lbf.

51 kN–


Ball Bearing (500)4 3.33 16 NFPA-G


Double Stainless

Steel Bright 6.6 x 2.5 2

16.2 oz.

460g

17 oz.

482g

9217 lbf.

41 kN

3372 lbf.

15 kN


Ball Bearing (500)2 1.48 13 NFPA-T


Double Stainless


40.3 oz.

1142g

44.2 oz.

1253g

14163 lbf.

63 kN

4383 lbf.

19.5 kN


Ball Bearing (500)4 3.33 16 NFPA-G

1.800.426.6251 | smc gear.net


10

ITEM # DESCRIPTION MATERIAL COLOR(s) L x W (inches) THICK (inches)1 WEIGHT MBS ROPE (dia) mm RATING

13700 Micro Rack Stainless Steel Rack

Stainless Steel Tie-off BarStainless Steel Brake Bars

Bright 8.66 x 2.75 0.3214.1 oz.

399g

1798 lbf.

8 kN

4945 lbf.

22 kN

7 - 12.5

11 - 12.5NA

NFPA14001NFPA Flat 6 Bar, J-Rack

Kit

Stainless Steel RackStainless Steel Tie-off Bar

Aluminum Brake Bars Bright 14.4 x 3.6 0.38

29.2 oz.

828g

3034 lbf.

13.5 kN

4945 lbf.

22 kN

9.5-12.5

11-16

NFPA-T

NFPA-G

NFPA14002NFPA Twist 6 Bar, J-Rack

Kit



29.2 oz.

828g

3034 lbf.

13.5 kN

4945 lbf.

22 kN

9.5-12.5

11-16

NFPA-T

NFPA-G

NFPA14003NFPA Long 6 Bar, J-Rack

Kit



32.9 oz.

933g

3034 lbf.

13.5 kN

4945 lbf.

22 kN

9.5-12.5

11-16

NFPA-T

NFPA-G

NFPA14400 NFPA 4 Bar U-Rack Kit Stainless Steel Rack

Stainless Steel Tie-off BarStainless Steel Brake Bars

Bright 9.6 x 3.6 0.3826.6 oz.

754g

3034 lbf.

13.5 kN

4945 lbf.

22 kN

9.5-12.5

11-16

NFPA-T

NFPA-G

NFPA14600 6 Bar U-Rack Kit Stainless Steel Rack

Stainless Steel Tie-off Bar Aluminum Brake Bars

Bright 14 x 3.6 0.3829.7 oz.

842g

3034 lbf.

13.5 kN

4945 lbf.

22 kN

9.5-12.5

11-16

NFPA-T

NFPA-G

Rappel Rack Kits

¹Dimension of the rack frame diameter only without the bars installed. See brake bar dimension for additional information.

1.800.426.6251 | smc gear.net


11

ITEM # DESCRIPTION MATERIAL COLOR(s) L x W (inches) THICK (inches) WEIGHT

13002 6 Bar J-Rack Stainless Steel Bright 14.4 x 2 0.3814.5 oz.

397g

13105 4 Bar U-Rack Stainless Steel Bright 9.6 x 2 0.3810.4 oz.

295g

13106 6 Bar U-Rack Stainless Steel Bright 14 x 2 0.3814.8 oz.

420g

13311 Long J-Rack Stainless Steel Bright 17.9 x 3.6 0.3818.4oz.

523g

13502 6 Bar Twisted J-Rack Stainless Steel Bright 14.4 x 2 0.3814.5 oz.

397g

11000 7/8” Brake Bar Stainless Steel Bright 2.47 x 0.87 0.874.1 oz.

120g

12010 1” Brake Bar - Angled Slot Stainless Steel Bright 2.455 x 1 12.8 oz.

80g

Rappel Racks & Brake Bars Components

1.800.426.6251 | smc gear.net


12

Brake Bars

ITEM # DESCRIPTION MATERIAL COLOR(s) L x W (inches) THICK (inches) WEIGHT

12020 1” Brake Bar - Straight Slot Stainless Steel Black 2.455 x 1 12.8 oz.

80g

12110 Tie-Off Bar - U-Rack Stainless Steel Bright 3.645 x 1 15.3 oz.

150g

12201 7/8” Brake Bar - Angled Slot Aluminum Bright 2.5 x 0.87 0.871.9 oz.

54g

12301 Tie-Off Bar - J-Rack Stainless Steel Bright 3.65 x 1 15.1 oz.

145g

12401 7/8” Brake Bar - Straight Slot Aluminum Blue 2.5 x 0.87 0.871.8 oz.

51g

12500 U Shape - Angled Slot Stainless Steel Bright 2.7 x 0.86 0.821.7 oz.

48g

12605 7/8” Grooved Angled Slot Aluminum Red 2.5 x 0.87 0.871.8 oz.

51g

1.800.426.6251 | smc gear.net


13

ITEM # DESCRIPTION MATERIAL COLOR(s) L x W (inches) THICK (inches)1 WEIGHT MBS ROPE (dia) mm RATING

817xx Mountaineering 8 Aluminum Black (00)Blue (02)

4.62 x 2.96 0.382.8 oz.

79.4g

1798 lbf.8kN

4046 lbf. 18 kN

8 - 10

10.2 - 13–

113000 Descent Control 8 Stainless Steel Bright 5.18 x 3.61 0.3757.5 oz.

213g

4046 lbf.

18 kN10.2 - 13 –

129000 SMC/ RA 8 Aluminum Black 6 x 3.4 0.55.3 oz.

150g

4945 lbf.

22 kN9.5 - 16 –

142000 Large Rescue 8 w/ Ears Aluminum Grey 7.15 x 6.4 0.58 oz.

227g

3822 lbf.

17 kN9.5 - 16 –

NFPA1265xx Escape 8 Aluminum Gold (01)Black (02)

2.8 x 2.73 0.381.7 oz.

48g

3147 lbf.

14 kN7.5 - 9.5 NFPA-E

NFPA1287xx Rescue 8 w/ Ears Aluminum Black(01)Grey (02)

6.16 x 5.25 0.56.5 oz.

184g

3035 lbf.13.5kN

4945 lbf. 22 kN

9.5 - 12.5

11 - 16

NFPA-T

NFPA-G

1695xx Spire AluminumBlue (02)

Orange (03)2.84 x 1.75 0.72

2.0 oz.

56g

1798 lbf.

8 kN7.5 - 10.7 UIAA

NFPA220300 Spider Stainless Face

Aluminum Body Blue/Black 8.64 x 3.35 1.55

19.8 oz.

562g

3035 lbf.

13.5 kN10 - 12.5 NFPA-T

Descenders

1.800.426.6251 | smc gear.net


14

ITEM # DESCRIPTION MATERIAL COLOR L x W (inches) THICK (inches) WEIGHT

148100 Rope Tracker Plastic Orange 20.1 x 3.4 114.5 oz.

413 g

148200 FLEX Plastic White 16 x 8 0.44 oz.

113 g

148202 FLEX Kit Plastic White 16 x 8 .728.3 oz.

235 g

148210 FLEX Clip Kit Aluminum Black 1” Diameter .720.32 oz.

9.1 g

148500 Edge Roller Aluminum Red 6.9 x 9.9 4.2549.6 oz.

1406 g

149000 Roof Roller Aluminum Gold 10 x 9.9 5.973.7 oz.

2091 g

Protection

1.800.426.6251 | smc gear.net


15

Rigging

ITEM # DESCRIPTION MATERIAL COLOR L x W (inches) THICK (inches) WEIGHT MBS RATING

815xx Rigging Ring Aluminum Grey (03)Red (05)

1.7 OD x 1.1 ID 0.50.9 oz.

26g

7193 lbf.

32 kN–

81600 Aluminum Descending Ring Aluminum Matte 2 OD x 1.5 ID 0.30.4 oz.

11g

3372 lbf.

15 kN–

130104 Webbing Rigging Plate Aluminum Orange 3.3 x 2.9 .251.9 oz.

53g

5171 lbf.

23kN–

NFPA130005 SMC Rigging Plate Aluminum Red 7 x 5.3 0.511.4 oz.

323g

11,240 lbf.

50 kNNFPA-G

NFPA1303xx Mini Rigging Plate Aluminum Black (01)Blue (02)

3.75 x 2.93 0.372.8 oz.

79g

8093 lbf.

36 kNNFPA-G

NFPA1360xx SMC Swivel Aluminum Blue/Black (00)Black/Black (07)

3.5 x 2 1.34.5 oz.

128g

9892 lbf.

44 kNNFPA-G

NFPA220500 Grip Aluminum Gold 3.8 x 2.9 1.856.7 oz.

190g

1124 lbf.

5 kNNFPA-T

305100 SMC Rescue StaykStainless Steel and

AluminumBright/Orange 35 x 3.85 x 1 2.7 9.2 lbs. * –

305130 SMC Rescue Stayk KitStainless Steel and

AluminumBright/Orange 35.1 x 3.85 x 1 2.7 27.6 lbs. * –

*MBS: Actual break strength is dependent on ground placement, density and composition. See user instructions.

1.800.426.6251 | smc gear.net


16

TerrAdaptor

The TerrAdaptor is the most versatile portable anchor system available for use in rescue, industrial, and wilderness environments. This innovate high directional system is the result of the combined years of experience in the design, use and manufacturing of equipment by Pigeon Mountain Industries (PMI), Skedco, and Seattle Manufacturing Corporation (SMC).

The TerrAdaptor system is unique in that it con� gures as a gin pole/monopod, an A-Frame/Bipod, a Quadpod and, of course, the most adjustable Tripod in the market today. Due to the extreme adjustability of the TerrAdaptor, countless non-standard con� gurations are available utilizing shallow angles and horizontals that are not available with other tripod systems in the market. With independently variable head angles and interchangeable compo-nents, the TerrAdaptor will adjust to your rescue environment whether it is rural, urban, industrial, or con� ned space.

The TerrAdaptor Portable Anchor System is Certi� ed CE0843 to EN795 and CEN TS16415 (PENDING) in the standard symmetric Tripod and Quadpod con� gurations and Certi� ed NFPA1983 2012 Edition.

NFPA230100 TerrAdaptor™ Tripod System1 TerrAdaptor™ Tripod Head2 O� set Leg Clamps with 3 Load Locking Pins1 Center Leg Clamp with 3 Load Locking Pins1 Main Attachment Pin3 Legs Kits with Modular Adaptors/Rocker Feet 3 Rope Hobble Sections1 Cotter Pin Kit1 Extra Leg Coupling Pin 1 Extra Load Locking Pin 2 Lash Rings with 1 Coupling Pin each 1 TerrAdaptor™ Head/ Accessory Bag2 TerrAdaptor™ Leg Bags TerrAdaptor™ 1 User Guide

230105 TerrAdaptor™ Quadpod Attachment KitQuadpod Head AttachmentLeg kit complete with Modular Adaptor/Rocker Foot Center Leg Clamp with 3 Load Locking Pins Main Attachment PinRope Hobble Section

230109 TerrAdaptor™ Gin to Quad KitQuadpod Head AttachmentCenter Leg Clamp with 3 Load Locking Pins Main Attachment PinRope Hobble Section

230106 TerrAdaptor™ Gin Pole Kit2 Lash Rings with 2 Coupling PinsLeg Kit with Modular foot/Rocker TerrAdaptor™ User Guide

230230 Lash Ring Assembly 1 Lash Ring1 Leg Coupling Pin

230370 QuickLash Assembly1 QuickLash1 Quick Release Pin

230326 Bolt Replacement Kit 4 SHCS Alloy Bolts 4 Nylok Nuts

230107 Leg Extension Kit 1 Mid-Tube1 Leg Coupling Pin

230260 Load Locking Head Pin

230301 Leg Coupling Pin230304 Replacement Quick Link230307 Rope Hobble Section230311 Main Attachment Pin 230314 TerrAdaptor™ Leg Bag230315 TerrAdaptor™ Head Bag 230360 TerrAdaptor™ Cable Sheave 230500 TerrAdaptor™ Rocker Foot 230510 TerrAdaptor™ Talon Foot 230530 TerrAdaptor™ Articulating Foot230540 TerrAdaptor™ Modular Adaptor Foot 230550 Standard Winch Bracket230551 Capstan Winch Bracket230552 Capstan Winch System

Pigeon Mountain Industries4466 N US Hwy 27 | LaFayette, GA 30728 | USA

Phone: 706.764.1437 | Fax: 706.764.1531www.pmirope.com

Skedco, Inc.10505 SW Manhasset Drive | Tualatin, OR 97062 | USA

Phone: 503.691.7909 | Fax: 503.691.7909www.skedco.com

Only Distributed By

For more information visit www.terradaptor.com

1.800.426.6251 | smc gear.net


17

Mountaineering Tools

ITEM # DESCRIPTION MATERIAL COLOR LENGTH THICK (inches) WEIGHT RATING

138000 Snow Saw Aluminum Blue 20.74 x 3.42 in. 0.1254 oz.

113g–

170500 Ice Axe Head Cover Neoprene Orange 13 in. –2.9 oz.

84g–

171200 Ice Axe Spike Cover Neoprene Orange 3.5 in. –.98 oz.

28g–

1788xx Capra Ice Axe Aluminum Shaft

Chromoly Steel HeadChromoly Steel Spike

Blue

60 cm*65 cm70 cm75 cm80 cm

100 cm

–.99 lbs.

453g*Meets UIAA**

*Axe weights are based off of the 60cm model. | **Tested to meet the current UIAA standard. xx = size

1.800.426.6251 | smc gear.net


18

ITEM # DESCRIPTION MATERIAL COLOR L x W (inches) WEIGHT RATING

162024 I Picket, 24" Aluminum Bright 24 x 212.7 oz.

361g–

162036 I Picket, 36" Aluminum Bright 36 x 219.2 oz.

544g–

162000 Picket CableStainless QuickLinkGalvinized Cable

Bright 36”3.10 oz.

88g_

164000 Snow Anchor, Small Aluminum Bright 7.5 x 4.487.5 oz.

211g_

164100 Snow Anchor, Large Aluminum Bright 10.25 x 5.9810 oz.

296gMeets UIAA*

Pickets and Anchors

**Tested to meet the current UIAA standard.

1.800.426.6251 | smc gear.net


19

Tent Stakes

ITEM # DESCRIPTION MATERIAL COLOR L x W (inches) WEIGHT

110006 6-1/2” Sheet Tent Stake Aluminum Aluminum 6.5 x 0.890.75 oz.

21g

110008 8-1/2” Sheet Tent Stake Aluminum Aluminum 8.5 x 0.891 oz.

28g

110009 9-1/2” Sheet Tent Stake Aluminum Aluminum 9.5 x 0.891 oz.

28g

110011 11-3/4” Perforated Tent Stake Aluminum Aluminum 11.75 x 0.891.36 oz.

38g

11002x Mountaineering Tent Stake Aluminum Bright (0)

Orange (3)9 x 1.29

1.5 oz.

42g

11002xMountaineering Tent Stake

4 Pack Aluminum

Bright (4)Orange (5)

9 x 1.296 oz.

168g

11003x Mountaineering Tent Stake Large Aluminum Bright (0)

Orange (3)14 x 1.29

2.7 oz.

75g

11003x Mountaineering Tent Stake

Large, 4 Pack Aluminum


14 x 1.2910.8 oz.

300g


Ultra Light Aluminum


7 x 0.610.50 oz.

14g


Ultra Light, 4 Pack Aluminum


7 x 0.612.0 oz.

56g

115000 T-Anchor Aluminum Bright 5.15 x 3.751 oz.

28g

115050 T-Anchor, 4 Pack Aluminum Bright 5.15 x 3.754 oz.

124g

1.800.426.6251 | smc gear.net


20

Endeez

ITEM # DESCRIPTION MATERIAL COLOR L x W (inches) THICK (inches) WEIGHT ROPE (dia)

169101 Endeez Pack, Small Aluminum Pewter/Green 4 x 0.51 0.51.56 oz.

16g7.5 - 9.2

169201 Endeez Pack, Medium Aluminum Pewter/Blue 4 x 0.56 0.56.60 oz.

17g9.2 - 10.4

169202 Endeez Pack, Medium Aluminum Blue/Purple 4 x 0.56 0.56.60 oz.

17g9.2 - 10.4

For the most updated information on all SMC products visit us at www.smcgear.net

6930 Salashan ParkwayFerndale, WA 98248

800.426.6251smcgear.net

President: Kathy HughesDirector of Design: Garin WallaceDirector of Engineering: Chris Starr Director of Sales: Donald Enos

Brands: Endeez & TerrAdaptorProduct Lines:n Endeez Rope End-icator n Ice Axes, Hammers & Accessoriesn Carabiners n Crampons & Accessoriesn Pulleys n Tent Stakesn Rigging n Pickets & Anchorsn Edge Protection n Snow Sawsn Figure 8’s n TerrAdaptor & Accessoriesn Descenders n Rappel Racks & Accessories

Memberships:n Outdoor Industry Association n NFPA n ASTM n NASARn MRA n UIAA n UL n Rotary International

SMC is a mountaineering and technical work and rescue brand that produces elite equipment. SMC designs and manufactures sport and rescue hardware to aircra� industry standards while remaining true to a heritage of excellence and innovation. Seasoned climbers and rescue person-nel depend on the reliable performance of SMC gear in the most critical situations and demand-ing conditions around the globe.

Founded in 1967 as Seattle Manufacturing Corporation, on the slopes and training grounds of the worlds best mountaineers, SMC gear is trustworthy in complicated rescues, record setting rapid ascents, and expeditions to the most remote summits in the world. Our � rst product was an oval carabiner designed and manufactured speci� cally for Mary Anderson of the original REI Co-op Store who was dissatis� ed with the quality and turnaround time of overseas manufactur-ers. Our founder, Jim Clark, identi� ed the critical design and tooling elements that REI required and brought his aircra� industry standards of excellence to the manufacture of mountaineering gear. Our products expanded into the rescue market as climbers of the 60’s and 70’s became the rescue experts of the 80’s. They required durable hardware that would reliably perform in the de-manding rescue environment. This request for stronger, more sophisticated products launched SMC’s technical rescue division.

Thirty years a� er our � rst oval carabiner, SMC saw a change in leadership that would instigate even higher standards of quality for our products. In 1997 while volunteering for Alaska State Parks, avid outdoorswoman Kathy Hughes was approached with the challenge of her life – to become the next CEO of SMC. Kathy le� Alaska to meet with Jim Clark and a� er considering the endless potential of commanding an industry icon, the decision was easy. Kathy became our CEO and moved SMC into a new era of customer service, information-driven communication, and ISO certi� cation.

SMC is one of the few manufacturers of mountaineering and technical work and rescue hardware that is ISO 9001 certi� ed. ISO 9001 is maintained by the International Organization for Standard-ization (ISO) and is a family of standards for managing quality control systems. This indepen-dent, third party certi� cation process guarantees reliability and e� ciency in manufacturing. We are proud that every piece of SMC gear meets these rigid controls; our products are simply the highest quality gear that you can buy; for your life – to last a lifetime.

Today, under the direction of Kathy Hughes and her highly skilled management team, SMC is proud to be a US manufacturer of functional, high-quality mountaineering and technical work and rescue gear that dreams, designs, and manufactures 100% of its equipment in the USA. We hold true to our heritage by continuously working to improve and develop our people, our processes and our procedures. Quality Gear for Life is more than a statement… for us, it is a way of life.

smc product workbook

Documents