sm broch platforms 040810.indd 1 4/8/10 12:05:02 pm · on the market. a galvanized inner coating...

SM_Broch_Platforms_040810.indd 1 4/8/10 12:05:02 PM

THE PINNACLE OF PERFORMANCEWithout question, Smeal platforms are the safest, most innovative

apparatus in the industry. Their performance is a result of intelligent

engineering, designing around the needs of the firefighter and using the

highest quality materials available. All of our platforms have a rating

of 1,000 lbs. dry or 500 lbs. while flowing water, with no restrictions.

When minimum stabilizer setup requirements have been achieved, the

maximum ratings of the platform remain constant regardless of elevation,

extension or rotational placement of the aerial. This allows firefighters to

do their jobs without worrying about operational hazards.

PLATFORMS: The Smeal platform is the most versatile in the industry.

The two front entry gates open outward to maximize interior work area

efficiency, and can be folded back to allow full access in confined areas

thanks to double hinges. A continuous handrail leading from the ladder to

the platform protects climbers from large openings that would otherwise

occur when the aerial is at a high angle.

Our rearmount platform features an impressive 21.5 sq. ft. inside working

area while the midmount boasts 17.5 sq. ft. An innovative four-section

modular platform allows for simple, cost-effective replacement if any part

of it is damaged. In addition to the many other safety-conscious design

decisions we’ve made on our platforms, we’ve positioned the repelling

arm at the front of the platform to allow for safer, easier entrance and exit.

CONTROLS: Our turntable control console is easy to read, easy

to understand and easy to operate. The main operation station

is located on the driver’s side of the turntable to protect

against possible damage from low hanging tree limbs that are

prevalent on many city streets. The manual, direct hydraulic

controls are primary and override the platform control station.

We use electronic-over-hydraulic proportional controllers with

built-in ramping at the platform control station, which permits

precise aerial performance, regardless of desired operational

speed. Furthermore, the three-speed selector system allows the

platform operator to select the maximum function speed for aerial

operations in order to provide optimal control.

The Smeal Loadminder continuously measures the total ladder

load and provides a LCD readout for constant monitoring by the

operator. Smeal also provides a load chart at the main control

station and in the platform.

AERIALS: Smeal aerial ladders are well known for their generous climbing

areas. This is largely due to routing air lines, hydraulic lines and electrical

cables within the base rails of the sections, as well as by utilizing

cable carriers. Structural members that are internally exposed to the

atmosphere are protected with a coating of a compound labeled NWAC

120-4. This is a highly effective cavity corrosion inhibitor that provides

long-term protection for both ferrous and non-ferrous metals. All Smeal

ladder rungs are fabricated of a special A606 Type 4 alloy that is corrosive

resistant. Each rung is covered with a highly durable and long lasting

serrated rubber cover attached with adhesive, as well as a mechanical

clip, assuring a firm climbing surface.

With all of its innovative features, the Smeal platform provides the

smoothest ride in the industry!

SMEAL PLATFORMS


100 Ft. Mid Mount• 5-section aerial structure• 99’ horizontal reach• 10’2” minimum travel height• Approximate OAL based on MFD cab – 47’10”

85 Ft. Rear Mount • 3-section aerial structure• 81’ horizontal reach• 12’ standard travel height• Approximate OAL based on MFD cab – 45’

85 Ft. Mid Mount • 5-section aerial structure• 86’ horizontal reach• 10’2” minimum travel height• Approximate OAL based on MFD cab – 44’8”

100 Ft. Rear Mount • 3-section aerial structure• 98’ horizontal reach• 12’2” standard travel height• Approximate OAL based on MFD cab – 49’7”


PLATFORM FEATURES

Stainless Steel Plumbing: Our plumbing manifold features stainless steel construction to provide strength and corrosion resistance.

QL-12 Electrical System: This “plug ‘n play” system reduces the amount of non-plug connectors and makes it easy to add components and make repairs to the electrical system. Smeal tillers come standard with a V-mux electrical system.


FP-4 Stabilizing System: Smeal’s unique stabilizing

system places the front stabilizers just behind the cab of the apparatus; this

forward placement provides easy access to the pump

panel while reducing stress on the chassis.

Platform: Smeal platforms are available with single and dual monitors with flow capacities ranging from 1,500 to 2,000 gpm. The monitors are available from Akron, Elkhart and Task Force Tips. Most monitors have nozzle sweep from -45 to +45 degrees vertical and 90 degrees horizontal left to right for full 180 degree coverage.

Substructure: Our hot dip galvanized body mounts come off the torque box and protrude outward to carry the body from the underside of the compartment structure. Additionally, both the upper and lower brackets have rubber blocks to absorb body shock. We also utilize an isolation barrier between dissimilar metals to prevent contact.

CP-84 Waterway: The CP-84 Waterway is a standard feature that provides the strongest, most durable waterway

on the market. A galvanized inner coating prevents corrosion of the 84,000 psi pipe while the exterior waterway is chrome plated to provide a smooth telescopic movement throughout

the entire extension and retraction of the aerial ladder.


dEdICATEd TO QUALITy


In this industry, you’ll never hear of anything being “too safe” or “too

effective.” So, when we build our apparatus, quality is always our top

priority. It starts with the best materials—like our steel aerial ladders and

substructures—to build the sturdiest trucks available. Then the apparatus is

constructed by our AWS-certified welders, and every single weld is NDT third-

party inspected using mag particle examination.

We also individually paint each piece of our apparatus prior to final assembly to ensure total coverage. This gives

our trucks their exceptional look and is critical in effectively protecting against corrosion.

Our platforms are specially designed for maximization of efficiency, and the strength and stability of the Smeal

structure provides security and produces confidence.

Before we send any apparatus out the door, it first goes through a number of rigorous tests to

ensure performance is up to Smeal standards. All of our efforts to ensure

quality mean you’ll get the safest apparatus on the market.

how to Find a dealeR

to best seRve you, sMeal has a nuMbeR oF

dealeR locations acRoss noRth aMeRica.

ouR dealeR netwoRk includes soMe oF

the Most knowledgeable, expeRienced

dealeRs in the industRy. to Find the one

neaRest you, visit sMeal.coM and click

on the “dealeRs” button.


There are a lot of fire apparatus manufacturers in this industry and, to be honest, most of them build a pretty

good truck. We don’t worry about other companies, though, because leaders don’t look back. They are focused

on the task at hand. Everyday, they push themselves to be the best. And for it, they are respected. Just like

you, there is a sense of honor in what we do. We work to make the perfect fire apparatus because we believe

the bravest of the brave deserve the best of the best. We are Smeal. We build respect.

sMealFiRe appaRatus co.

p.o. box 8

610 west 4th stReet

snydeR, nebRaska 68664

ph: 402-568-2224

Fx: 402-568-2346

[email protected]

sMeal.coM

Fire Pumps, Aerials, and Line-Voltage generators are

tested by UL in accordance with NFPA 1901


sm broch platforms 040810.indd 1 4/8/10 12:05:02 pm · on the market. a galvanized inner coating...

Documents