sip-based-dect rev1.9 25 feb., 2013. 2 table of contents 1. overview 2. specification and features...
TRANSCRIPT
![Page 1: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/1.jpg)
SIP-Based-DECT
Rev1.9 25 Feb., 2013
![Page 2: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/2.jpg)
2
Table of Contents
1. Overview
2. Specification and Features
3. Air Synchronization 4. Registration 1. Installation Basic Flow 2. CS radio zone design 3. CS/PS Firmware Update 4. Setup CS/PS and NS1000 5. Maintenance of System phone book
Appendix
- PS Ring Group-Air Synchronization -Move CS -Site Survey (Tool)-Site Planning (Tool)
- PS function List
![Page 3: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/3.jpg)
3
Chapter 1
Overview
![Page 4: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/4.jpg)
4
1. Overview (Why SIP-Based DECT)
LANLAN
No separate server or GW is required with NS1000, Offer high-quality Business Communication, with most Reliable DECT Technology.
Spec.
Radio technology DECT VoIP signaling SIP
Number of Handsets Max. 255 handsets *1
Number of CS Max. 128 CS
Max. 32 CS/8Air sync group
CS synchronization Air synchronization
Handover Yes (seamless)
Cell StationCell Station
In Expensive Wireless solution with SIP based DECT solutionHigh Quality Voice with Noise reduction Dramatically Reduce Wire installation cost in large service area.Easy install and maintenance with Firmware Air-download
![Page 5: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/5.jpg)
5
1. Overview (Hand Over)
<Cell Station>
SIP based DECT phone satisfies needs of personnel who want to be always ready to talk to partners or customers anywhere and anytime within their company.
<PS> <PS>
<Cell Station>
<PS> <PS>
NS1000
Hand Over
![Page 6: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/6.jpg)
6
PS can be reception which is located anywhere.The whole building becomes the communication zone.
Multi Zone
Features and BenefitsOffice
StorageMeeting Room
Hallways
Hand-over
Suitable Environments
Frequent moving about inside the company
On-site employees: efficient because it is not necessary to return to the office to make a call.
Call receptionists: less trouble because the person to transfer the call to can be anywhere.
Customers: improved CS because there is less time spent waiting to transfer calls.
Retail Store
Automotive Dealership
Factory
1. Overview
![Page 7: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/7.jpg)
7
Move to other System/LocationPS can be moved from original site to the other site.
<Cell Station-1->
IP
<Cell Station-2->
Slave UnitsMaster Units
<PS201> <PS301>Move with PSto other site
In this condition, the PS must be resisted to other unit also
PS can be resisted up to 4 different Cell Station (Need to regist NS1000 also)
1. Overview
![Page 8: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/8.jpg)
8
Chapter 2
Specification and Features
![Page 9: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/9.jpg)
9
US/CANADA Model
EU Model
- High quality wideband voice
- Noise reduction
-Full-duplex hands free
-Air-download of firmware
- Headset jack (2.5mm plug)
- Vibration
- Up to 500 personal phonebook
2. Specification and Features
KX-UDT111
Portable Station (Standard Model)
![Page 10: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/10.jpg)
10
US/CANADA
*LCD back light off and Bluetooth is not in use.
*Future
2. Specification and Features
- High quality wideband voice
- Noise reduction
-Full-duplex hands free
- Air-download of firmware
- Headset jack (2.5mm plug)
- Vibration
- Up to 500 personal phonebook
- Bluetooth ( Version 2.0, Class 2 )(Headset/Phonebook transfer )
Portable Station (Slim & Light Model)
KX-UDT121
EU Model
![Page 11: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/11.jpg)
11
*LCD back light off and Bluetooth is not in use.
*Future
2. Specification and Features
- High quality wideband voice
- Noise reduction
-Full-duplex hands free
- Air-download of firmware
- Vibration
- Against Hazard LevelIP65 (IEC529)
- Up to 500 personal phonebook
- Bluetooth ( Version 2.0, Class 2 )(Headset/Phonebook transfer )
Portable Station (Taught Model)
KX-UDT131
US/CANADA EU Model
![Page 12: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/12.jpg)
12
- Web interface for set up
- Air-download of firmware
- Max PS registration : Up to 255 per CS and System
- The number of Cell Station for a system : Up to 64 or 128 (One Look networking) (32 per air sync group/Max 8 Air sync group per
one Unit, total max 128 Air Sync group on One-Look networking )
- PoE or optional AC adaptor(KX-A239)
2. Specification and Features
*Future
Cell Station
KX-UDS124
![Page 13: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/13.jpg)
13
PS Detail Specification
KX-UDT111 KX-UDT121 KX-UDT131
LCD1.8”, 65,000-color
TFT display1.8”, 65,000-color
TFT display1.8”, 65,000-color
TFT displayLCD Backlit Yes Yes YesBluetooth No Built in Built inVibration Yes Yes YesQuick Charge No ( 10Hours) Yes (3 Hours) Yes (3 Hours)
Talk Time12h (Narrow band)
9h (Wide band)
14h (Narrow band)
11h (Wide band)
14h (Narrow band)
11h (Wide band)
Stand bay time 200h 200h 200h
DECT Encryption Yes Yes Yes
Soft Key 3 3 3Size (HxWxD) 146.3x48x25.4 mm 127.5x48.5x18 mm 152 X 55 X 23mmWeight 115g 90g 150g
BatteryAAA-Ni-MH 2 cell Battery : Li-ion 3.7V
700mAhBattery : Li-ion 3.7V
700mAh
EncloseAC Adaptor, ChargerBelt Clip and Holder
AC Adaptor, ChargerBelt Clip and Holder
AC Adaptor, ChargerBelt Clip and Holder
2. Specification and Features
![Page 14: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/14.jpg)
14
CS Detail Specification
2. Specification and Features
Model No. KX-UDS124
Type 4ch wideband audio CS
Max. simultaneous calls 4
Wideband Audio Yes
Power supplyPoE (IEEE 802.3af)
AC adaptor ( optional )
CODEC (IP) G.722, G.711, G.729a
LAN port 10 base-T / 100 base-TX
Firmware upgrade Yes
DECT Encryption Yes
Seamless Handover Yes
Size 190×133.9×39.3 mm
Weight 330g (Include wall mount adaptor)
![Page 15: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/15.jpg)
15
CS Detail Specification
2. Specification and Features
LED indication on CS
LED Display Status
OFF Power Off / CS software downloadGreen ON Standby (no active calls)Slow Green Flashing Talk (active calls)Moderate Green Flashing Busy (All talk path are occupied)Red ON Fault (FLASH ROM Can not access etc.) Slow Red Flashing OUS or Start up (data link establishment air synchronization)
Moderate Red Flashing Start up (power on data link establishment)Amber ON Standby: unstable synchronization (no active calls)Slow Amber Flashing Talk: unstable synchronization (active calls)Moderate Amber Flashing Busy: unstable synchronization *
Moderate (Red ->Green->Yellow) Flashing Detect Rest Switch on Power On Status (Open CS-Web port)Red and Green alternate flashing Master-CS indication on Site survey mode. LED indication for
Slave CS on Site survey mode is follow. - Green Flashing :Synchronizing - Amber Flashing :Weak radio signaling level - Red Flashing : Out of area
Note) LED flashing patterns are as follows: Slow Flashing: 60 times per minute Moderate Flashing: 120 t60INT-2 Green Flashing/per minute
Note) LED flashing patterns are as follows: Slow Flashing: 60 times per minute Moderate Flashing: 120 t60INT-2 Green Flashing/per minute
![Page 16: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/16.jpg)
16
CS Detail Specification
2. Specification and Features
Error Indication and how to recover
![Page 17: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/17.jpg)
17
System Capacity
2. Specification and Features
System Capacity
StandAloneStacking system Networking
Main One Slave Two Slave
Extension 640 640 1000
IP 640 640 1000
PS(UDS1XX) 255 255 255
Legacy 2 0 36/96/128/240(*1) 72/192/256/480 (*2) 1000
SLT 2 0 36/96/128/160(*1) 72/192/256/320(*2) 1000
DPT 0 0 36/96/128/160(*1) 72/192/256/320(*2) 1000
CS (pcs) 64 64 128
CS-IF (4/8)Card 0 0 4 8 16
DPT-CS 0 0 11/32/32/32(*1) 22/64/64/64(*2) 128
IP-CS 64 64 128
SIP-CS(UDS124)
64 64 128
PS (WT/TCA) 512 512 512
*1: MM/NN/XX/YY means One NCP/One TDE100-TDA100/OneTDE200-TA200/OneTDE600-TDA600*2: mm/nn/xx/yy means Two NCP/Two TDE100-TDA100/TwoTDE200-TA200/TwoTDE600-TDA600
![Page 18: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/18.jpg)
18
2. Specification and Features (Cover Area)
Gray Zone:Conversation will be intermittent
A
B
C
Coverage Area: (About 50m to 60m)
A
Good Coverage Area: (About 30m to 40m) Good sound quality can be maintained.
Out of Service: Cannot make/receive calls.
C
B
CS Coverage Area for Establishing Conversation Using PSs
![Page 19: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/19.jpg)
19
2. Specification and Features (Easy Installation)
Site Survey for Air Synchronization
SIP-CSs have ability of site survey to check radio signal strength.By the LED on SIP-CS, you can check the radio signalSIP-CSs have ability of site survey to check radio signal strength.By the LED on SIP-CS, you can check the radio signal
1. Set Temporally master CS for site survey as planned - Power on CS with pressing rest SW . - Release Reset switch while LED flashes (Green/Red/Amber) - Press Rest Switch one second once again (Green and Red LED start flashing)2. Turn on Power of slave CS and locate it, then check LED on CS.3. Move Slave until LED on Slave CS goes greenSee Appendix in more detail
![Page 20: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/20.jpg)
20
Site Survey for S-PS Service Area
The PS has a PS AREA CHECK abilityUser can confirm CS cover area easily by this functionThe PS has a PS AREA CHECK abilityUser can confirm CS cover area easily by this function
1. Power ON CS and set Maintenance mode2. Change PS to PS AREA CHECK mode3. Make call from PS to PS
See Appendix in more Detail
2. Specification and Features (Easy Installation)
![Page 21: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/21.jpg)
21
Clear & Natural voice by Wideband Audio. Multi Handsets and Multi-Cell supported.
Better Receiving Frequency ResponseBetter Receiving Frequency Response
Narrow Band (G.711)
Wide Band (G.722)
Human voice Range
Enhance the High frequency by aperture rate of the receiver
aperture rate 24.5 %
aperture rate4.3 %
Enhance the Lower frequency with small receiver
EnhanceEnhance
UDT111
aperture rate 35 %
UDT121previous model
(Panasonic PBX terminal)
U P
2. Specification and Features
Wideband Audio Support
![Page 22: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/22.jpg)
22
Detect and reduce noise part from the transmission voice
Dynamic receiving volume control according to acoustic ambient noise characteristics
Noise reduction
Noise
Voice
High noise High volumeLow noise Normal volume
Noisesound
Noisesound
TX : Noise Reduction for Sending Signal
RX : Listening Enhancement for Receiving Signal
Can configure TX/RX noise reduction to ON/OFF during standby and talk (Default : OFF).
2. Specification and Features (Pattern1)
Noise Reduction features
Waiting Demo Voice file ***
![Page 23: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/23.jpg)
23
Strong against the multipath environment by the enhancedprecision of error detection and new voice processing technology.
Fading
Example
[Time]
Old
New
Voice waveform
Received RF powerat cordless handset under multipath environment.
Multipath
The fading occurs when moving the place where the electricwave is strengthened or weakened each other under multipath environment.
Error
FreqLow
High Less
Error
CS
PS
Ex) cubicle farm, concrete building
occurrence multipath by direct/reflected/diffracted wave, etc
PanasonicTechnology
Advanced error correction makes stable communication.
Proprietary Process
Directwave
Diffractedwave
Reflected wave
2. Specification and Features (Pattern1)
Noise Reduction features
![Page 24: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/24.jpg)
24
CONCAVE
-Shape to avoid operation mistake in the pocket- Shape to protect keys-Concave shape and rippled keys for easy access to keys 3 Soft keys
Navigation key
1.8inch Color LCD with backlit
Receiver
Headset Connection
Microphone
aperture rate 35.0%(UDT111)
aperture rate 4.3%(previous model)
U P
Enhance aperture rate Large Ringer / Charge LED
Key backlit
Belt clip hole
Wall mountable charger
Strap hole1
Strap hole2
KX-UDT111 Appearance
2. Specification and Features
![Page 25: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/25.jpg)
25
3 Soft keys
Navigation key
1.8inchColor LCDwith backlit
Receiver
HeadsetConnection
Microphone
aperture rate 24.5%(UDT121)
aperture rate 4.3%(previous model)
Enhance aperture rate
( 90g )( 48.5 mm)
( 127.5 mm)
( 18 mm)
Pocket size
Plating Grill Section keys
U P
Ringer / Charge LED
Wall mountable charger
Belt clip hole
Key backlit
Strap hole1
Strap hole2
KX-UDT121 Appearance
2. Specification and Features
![Page 26: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/26.jpg)
26
Chapter 3
Air Synchronization
![Page 27: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/27.jpg)
27
3. Air Synchronization
Handover is available
Handover is not Available
Air Synchronisation
Air Synchronisation
LAN i/f L2 SW
Handover is not Available
SynchronisedBy Air Synchronisation
To activate Handover through CS, all CS must be synchronized.CSs are synchronized by using “Air Synchronization” for same air Sync. groupAfter CS synchronized with other CS, Handover is available.
CS (Master)
CS (Slave)
CS (Slave)
Air Synchronization
![Page 28: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/28.jpg)
28
Gray Zone:Conversation will be intermittent
A
B
C
Coverage Area:Radio signal strength level is between “03” (about 50m to 60m)and “14” (about 20m to 30m).
A
Good Coverage Area:Radio signal strength level is between “05” (about 40m to 50m)and “14” (about 20m to 30m).Good synchronisation quality can be maintained.
Out of Service:0m to 3m or the radio signal strength level is “00 to 02”.Cannot be synchronized.
C
B
3. Air Synchronization
You must not install SIP-CS without site survey.
C
CS Coverage Area for Air Synchronization between CSs
![Page 29: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/29.jpg)
29
Chapter 4
Registration
![Page 30: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/30.jpg)
30
Following is Step for SIP based DECT system registration
Step for DECT System Installation
4. Registration
Step1: Site Planning
Step3:CS Registration into Master CS ( By CS-web)
Step4: TreeSurvey
Step2:Step up Terminal Type
Step1: Local firm Update
1) Instauration Basic Flow
Step2: Site Survey
Step3: Entry CS/PS name and FF-Key
Step4: Entry CS and PS extension Number)
2) CS Radio Zone Setting (Site Survey)Step0: Initialing CS
3) Firmware UP date
Step1:Virtual Extension (UT) Install
4) Set up CS/PS and NS1000
![Page 31: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/31.jpg)
31
Continue
Step for DECT System Installation
4. Registration
Step8: Set up Slave CS
Step6: Set up System information URL
Step7: PS registration
Step5: Set up Master CS
4) Set up CS/PS and NS1000
Step9: Set up Master CS of other Air sync group
Step10: Set up Slave/Master CS to NS1000 (For Ring group)
5) Set up CS/PS and NS1000
![Page 32: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/32.jpg)
32
3. Setup CS/PS and NS1000 3-1. NS1000 setting by Web-MC 3-2. Super Master CS setting by CS-Web 3-3. PS registration
4. Maintenance of System phone book
1. CS radio zone design (Site Survey) 1-1. Site Planning 1-2. Site Survey 1-3. CS Registration into Master CS ( By CS-we
b ) 1-4. Tree Survey
5. PS Ring group setting (see Appendix)
4.1. Installation Basic Flow
Basic Flow how to set up CS/PS and regist to NS1000
2. Firmware Update 2-1. Manual Update
![Page 33: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/33.jpg)
33
Before CS/PS registration, following process must be done
Step0: Initialize CS for Before Registration
4.2. CS Radio Zone setting
1. Initialize CS
2. Open CS-Web interface
1. Depress RESET Switch while CS is
power on ( See Note )2. Keep pressing RESET Switch 10 sec.
And wait around 60sec until LED turn
on red
When you use CS very first time, you do
not need to initialize
Note : You need wait until LED on the
CS will start blinking RED or Stay
Red when you initialize CS
See next page how to initialize CS by Web
1. Depress RESET Switch and turn on
CS power
2. Keep pressing RESET until LED
blink amber/red/green
![Page 34: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/34.jpg)
34
Step0: Initialize CS by CS-Web
4.2. CS Radio Zone setting
You can initialize CS by CS-Web interface
Default Web Address(192.168.0.241)
CS-Web
For CS and PS registration, need to set up Super Master CS
1) Open CS-Web (See previous page)2) Access CS-Web (Default Web address is 192.168.0.241)3) Go to Maintenance menu then proceed Factory Reset4) Then CS will be initialized and LED on CS will start RED blinking
LOGIN
CS
Note: *1 To enable CS-Web function, need to proceed power on with reset SW (See Page 28)
Login/Password : For Installer instoperatoruserid/instpass, For Customer
admin/adminpass
![Page 35: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/35.jpg)
35
Step1: Site Planning
4.2. CS Radio Zone setting
- Site planning tool (Excel) Local PC PBX Support Page of CS-Web
1. Down Load
1) Download Site planning tool (Excel) from PBX Support Page of CS Web Site
2) After you Import site map data to this tool and determine the size scale, you can plan the CS position and check the radio range of CS. (simulate for CS positioning)
Note: Please refer Appendix more in detail
2. Determine size scale
site map data ( jpg format)
Import
2. Plan & Check CS position
Plan the CS position by using Site planning tool
![Page 36: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/36.jpg)
36
4.2. CS Radio Zone setting
Step2:Site Survey (1/2)
■ Green OK ■ Amber NG (poor) ■ Red NG (out of range)
LED
Slave
Slave
SlaveSlave
Slave
SyncMastermode
ChangePosition
LED
Locate CS as temporarily position by using LED indication
1) Keep Pressing SW and turn on the CS.2) Release the SW button and depress it again. ⇒ Sync Master mode for Site survey starts.
3) Other CS(s) synchronize to Sync Master CS automatically 4) Check other CS’s LED * Confirm the CS radio status at planning
position5) Change position until being Green LED
6) Depress the SW button again. (return to Slave)6) Depress the SW button again. (return to Slave)
![Page 37: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/37.jpg)
37
4.2. CS Radio Zone setting
Step2:Site Survey (2/2)
Following shows Site Survey status indication and status1. Change to Survey Mode Case 1: Keep Pressing reset SW and turn on the CS.(Master Mote)
Moderate Red Flashing
Red and Green Alternate Flashing
Survey Mode1
Power on CS withPressing reset SW
Release Rest SWAnd depress again
Case 2: Turn on the CS normally. (Slave Mode)
Moderate Red Flashing
Power on CS
2. How to Return Normal Mode from Survey mode Either press Reset SW more than 10 sec, or Power Off CS then Power on CS with pressing Rest SW then change to Fix IP mode then restart CS
Note : CS must be Fixed IP
Mode
Ex) 192.168.0.241
Survey Mode2
CS will enter site survey mode automatically when receives signal from Master CS
![Page 38: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/38.jpg)
38
4.2. CS Radio Zone setting
Step3:CS registration in to Master CS
CS Registration into Master CS by CS-Web
CS-Web
SuperMaster
SlaveSlave
Slave Slave
2.
3.
4.
3.1.
1. Change “CS Class” from “Slave” to “Master” via CS-Web.2. Push “Start CS Registration” button in CS Management
screen.3. CS(s) that is registered in Super Master are listed up.
1.
![Page 39: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/39.jpg)
39
4.2. CS Radio Zone setting
Step4:Tree Survey
Tree Survey (Auto Air Synchronization) by Super Master CS-Web or PC Tool
Web user interface (Web application)
CS-MT (SIP CS Management Tool)
- For small system- No installation needed
- For mid and large system- Installation is necessary
CS-Web
SuperMaster
Slave1Slave2
Slave3 Slave4 Slave5
. Auto Air Synchronization
1.
3.
1) Push “Start Tree Survey” button via CSWeb.2) System executes auto air synchronization and calculate Tree structure.3) Push “Apply” button.
Note: In case that # of CS are up to 9, PC tool needs to be used for tree-survey.
![Page 40: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/40.jpg)
40
Step1:Update firmware by CS-Web
4. 3 Firmware Update
You can perform the firmware update manually using CS Web programming. After the firmware is uploaded to the Super Master CS, the Super Master CS distributes the firmware to all other SIP-CSs automatically.
You can perform the firmware update manually using CS Web programming. After the firmware is uploaded to the Super Master CS, the Super Master CS distributes the firmware to all other SIP-CSs automatically.
CS-WebUpload new firmwareUpload new firmware
Deliver to all CS Deliver to all CS
Note: You must update CS firmware to V01.200 or later when you use CS under NS1000Note: You must update CS firmware to V01.200 or later when you use CS under NS1000
1. Get in to [Firmware Update].2. Select [Direct] for [Update Mode].3. Select updated firmware4. Click [All Update Firmware].
1. Get in to [Firmware Update].2. Select [Direct] for [Update Mode].3. Select updated firmware4. Click [All Update Firmware].
1.
2
34
![Page 41: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/41.jpg)
41
Click [Setup] select [PBX Configuration] – [1.Configration] – [1.Slot] [Virtual] – [V-UTEXT32]
Step1:Vitrula Extension (UT) install
4. 4 Set up CS/PS and NS1000
![Page 42: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/42.jpg)
42
Set up CS or PS type of Telephone type in Port Property as Master CS/SIP-CS or S-PS
Click [Set-up] - [1.Configlation] - [1. Slot] – [Select Target V-UTEXT32] – [Port property]
Step2: Set up Terminal Type
Note: 1. Telephone Type Setting is
Master CS: Super master CS which is Master CS of Air Sync Group #1
SIP-CS : Master CS of Air Sync Group 2 to 8 and or all slave CS S-PS : PS
2. Only one Master CS can be set per one Unit 3. Do not need to set UP SIP-CS if customer does not need to set up PS-Ringing (ICD-Group Function)
4. 4 Set up CS/PS and NS1000
![Page 43: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/43.jpg)
43
1. Enter Name of PS and Extension number
Click [Set-up] - [1.Configlation] - [1. Slot] – [Select Target V-UTEXT32] – [Port property]
2. Enter FF-Key of PS
Click [Set-up] - [4. Extension] - [1.Wired Extension] - [4. Flexible Button] – [Target PS ]
Note: Set up PS related programming by wired extension setting if needed
Enter PS NameEnter PS Name
Enter FF-Key CodeEnter FF-Key Code
Can be set these
Functions
Can be set these
Functions
Step3: Entry CS/PS name and FF-Key
4. 4 Set up CS/PS and NS1000
![Page 44: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/44.jpg)
44
Note: 1.For PS registration, need to assign Super Master CS in Virtual UT extension card But, It will not need AK (Capacity of UT-Extension) for Master CS but need AK for PS
1. Enter Name of CS and Extension number
Click [Set-up] - [1.Configlation] - [1. Slot] – [Select Target V-UTEXT32] – [Port property]
Step4: Entry CS and PS extension Number
4. 4 Set up CS/PS and NS1000
![Page 45: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/45.jpg)
45
Default Web Address(192.168.0.241)
CS-Web
For CS and PS registration, need to set up Super Master CS
1) Login CS-Web (192.168.0.241 as a default) In default setting, CS-Web site is set as 192.168.0.2412) Set up own IP Address In default setting, CS is defined as DHCP mode. If no DHCP server, need to set up own IP address. After IP Address, CS will restart automatically. Better select Static mode on Master CS3) Set CS mode as Mater CS In default, CS mode is set as Slave CS, so need to set CS mode as Master CS . After set Master CS, CS will restart automatically
LOGIN
Note: *1 To enable CS-Web function, need to proceed power on with reset SW (See Page 28)
Login/Password : For Installer instoperatoruserid/instpass, For Customer
admin/adminpass
Step5: Set up Master CS
Super Master CS
4. 4 Set up CS/PS and NS1000
![Page 46: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/46.jpg)
46
1) Set following URL into System File URL http://192.168.0.101:7580/utdownload/System.cfg
Then, Click All Save.After set up URL, CS will restart automatically.
Note: At this point, configuration data is downloaded into Super Master CS and registrated to NS1000 automatically even if registration mode is [manual] mode in NS1000 Do not enter any other field
NS1000 IP address
In order to download configuration file from NS1000, URL information of Super Master CS for getting the file in NS1000 has to be set by CS-Web.
Step6: Set up System information URL (in Master CS)
Port #
4. 4 Set up CS/PS and NS1000
![Page 47: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/47.jpg)
47
PSSuper Master CS
CS-Web
PS has to be registered into Super Master CS by CS-Web as follows:
1) Login CS-Web
2) Select menu of PS Registration.
3) Click Start PS Registration.
4) Select Available PS and move to Selected PS by “>” button.
5) Click Next.
6) Set PS to registration mode and register that to neighbor CS. *registration mode = push button on PS.
LOGIN
Regist
Note: 1. Extension Number is downloaded from NS 1000 automatically, and also when change PS
extension number by Web-MC of NS1000, the modification data is also down loaded automatically
2. After regist PS to CS, CS-Web will be closed. After Close CS-Web, can open Web Port by PS setting
Caution: Firmware up process may execute after complete PS registration, during this process you can not
de-registration and also do not power down PS, until complete Firmware version up.
Step7: PS Registration
4. 4 Set up CS/PS and NS1000
![Page 48: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/48.jpg)
48
Slave CSSuper Master CS
CS-Web
Slave CS can regist to Super Master CS. Just Set up IP address of Master CS (*) Then proceed CS registration by Super Master CS
Note: If System Mode is set up as DHCP enable, do not need to set up Own IP-Address
LOGIN
Regist
Set up Slave CS IP address Set up Master IP address *
Start CS registration in Super Master CS
CS-Web of Slave CS
LOGIN
CS-Web of Super Master CS
Step8: Set up Slave CS
4. 4 Set up CS/PS and NS1000
![Page 49: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/49.jpg)
49
Master CSSuper Master CS
CS-Web
Master CS can regist to Super Master CS Just Set up own IP
address and Super Master IP address *And need to proceed CS registration by Super Master CS
Note: If System Mode is set up as DHCP enable, do not need to set up Own IP-Address When set up different Air Sync Group (Not 1), then need to set up Master IP Address When change any Air setting value, the CS will be restarted automatically
LOGIN
Regist
Set up Master CS IP address Set up Super Master IP address *
Start CS registration in Super Master CS
LOGIN
CS-Web of Master CS
CS-Web of Super Master CS
Step9: Set up Master CS of other Air sync group
4. 4 Set up CS/PS and NS1000
![Page 50: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/50.jpg)
50
Super Master CS
CS-Web
When user want to use PS-RING group by NS1000 ICD Group function, Must regist Master CS and Slave CS to NS 1000 as follow
1) Set UP Telephone Type as SIP-CS and Extension Number in Web-MC
2) Set up Extension number of Master CS/Slave CS in CS-Web as same as NS1000 Data
3) Set up Password (1234 as default) in CS-Web
WEB-MC UT-EXT32 Port property
Step10: Set up Slave/Master CS to NS1000 (For Ring group)
Slave CS
LOGIN
Regist
4. 4 Set up CS/PS and NS1000
![Page 51: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/51.jpg)
51
Download System Speed Dial data to PS Phone Book
4.5 Phone book registration
Download
Deliver
When System Speed dial of NS1000 is modified, NS1000 will download System Speed dial data to Super Master CS.Master CS will deliver Data to PS /Other Master CS as Phone book data, after complete download.The total number of downloaded data is defined by [Site-Property]
Note: 1. It will take around 40second to deliver Phone book Data. which is same setting for UT. Default is 300 *1 2. PS will show [Downloading PhoneBook ] as download mode as download mode. 3. Download will start when either [Apply] or [OK] ICON is clicked 4. Can not set Tennant group for PS, so basic Speed dial data is shared by all PS *1: It will take around 5 minutes to complete Phonebook transfer as MAX(256 PS is in One Cell Station)
![Page 52: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/52.jpg)
52
Appendix
![Page 53: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/53.jpg)
53
EXT. Status
200 INS
201 INS
300
301
ICD group
Member
600 300, 301
601
NS1000 setting by Web-MC
CS setting by CS-Web
Assign CS extension number in NS1000- Virtual V-UTEXT Port Property
Set ICD group- ICD Group Setting
NS1000 setting by Web-MC
Assign CS extension number in each CS
1 2
3 4 CS setting by CS-Web
Extn.300 Extn.301
PS Index=P001Extn.200
Assign member of PS Ring group in S-Master CS
Index #
Group #
Member
1 600 P001, P002
2
12
PS Index=P002Extn.201
Appendix
PS Ring Group #1 (How to work)
![Page 54: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/54.jpg)
54
1. Assign CS extension number
Extension numbers must be assigned to all CSs in the same way of UT series SIP phones - Setup- PBX Configuration 1.1 Slot - Virtual V-UTEXT Port Property
- Setup-PBX Configuration 3.5.1 ICD Group Setting
2. Set ICD group
Extension number of CSs to cover area for PS ringing need to be set in a ICD group as the member.
Note: About CS registration into NS1000No operation is required for registration into NS1000 like as PS.Registration will be completed automatically when match CS extension number and password on CS with the number on NS1000
Appendix
Set CS number as ICD-G member
Set CS number as ICD-G member
PS Ring Group #2 (How to set up)
![Page 55: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/55.jpg)
55
3. Set CS extension number by CS-webEach CS must assign their extension number for PS ring group. Installer needs to log-in into each CS for this setting.
3-1. How to access to each CSEach CS can be logged in from CS-web of Super master CS as follows:1) Select menu of CS Management.2) Click Remote Login button for CS that you want to log-in.
3-2. Set extension number in each CSFollowing items need to be set in each CS when
login to CS.1) Select menu of SIP Settings - CS.2) Set CS’s extension number into phone number3) Set Authentication ID (CS’s extension number)4) Set Authentication Password (“1234”) than, Click Save.
Appendix
PS Ring Group #3 (How to Set up)
![Page 56: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/56.jpg)
56
4. Set PS Ring Group by CS-webPSs are assigned as group member by CS-Web. The setting is required only for Super Master CS.
1) Select menu of PS Ring Group Settings
2) Click PS group registration button of specified group
3) Select PSs from Available Users and move to Group Members by “>” button.
4) Click “All Save” (Setting data is delivered to all CS)
4
2
3
Appendix
PS Ring Group #4 (How to Set up)
1
![Page 57: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/57.jpg)
57
Air Synchronization
SIP Based DECT-CS (MaterSIP Based DECT-CS (Mater CSCS))
An CS configured as Master CS will create and send out its own timing and synchronisation.
SIP Based DECT-CS (SlaveSIP Based DECT-CS (Slave CSCS))
An CS configured as Slave CS will receive timing and synchronisation from CS set to Master CS.
Air Synchronization Mater and Slave CS
![Page 58: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/58.jpg)
58
Air Synchronization
SIP Based DECT-CS Classification
CS Class Description
Master CS1
(synchronization source clock)
Generates clock signal.
Master CS2
(backup for Master CS1)
- Receives clock signal from Master CS1
- Can also generate clock signal if Master CS1 malfunctions.
Slave CS Receives clock signal from other CSs.
Master CS1
Master CS2
Slave CS
CSs are assigned to any one of the following three classifications forImplementing air synchronization.
Slave CS Slave CS Slave CS
Level 1 Level 2 Level 3 Level 4
Level 1
It is recommended that the number of levels in the synchronisation hierarchy is minimized for stable air synchronization. The maximum number of levels is 8
Condition of Air Synchronization
Level 8
![Page 59: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/59.jpg)
59
IP-CS Air Synchronization
Master Unit Slave Unit
Onelook Network
Master CS Slave CS Slave CS
Onelook NetworkSlave CS registered to Slave Unit can NOT Air synchronize with Master CS registered to Master Unit, so it is necessary to install additional Master CS to Slave Unit.
Master Unit Slave Unit
Onelook Network
Master CS Slave CS Master CS Slave CS
Air Synchronization Group1 Air Synchronization Group2
Condition of Air Synchronization
![Page 60: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/60.jpg)
60
Move CS
When move CS location which is already registrated, just back up CS data, then initialize CS. After move CS location the restore the back up data .
How to move registrated CS 1/2
CS-Web
Master
Slave1Slave2
Slave3 Slave4 Slave5
Slave4
Move
1) Login CS-Web for Slave4 by Installer ID
2) Back up CS data to local PC
3) Reset to Factory data (See 4.2 Step 0)
4) Set Master CS Site survey mode then move CS
(See 4.2 Step2) Then finalize CS position
CS Data Back up/Restore Menu
![Page 61: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/61.jpg)
61
Move CS
When move CS location which is already registrated, just back up CS data, then initialize CS. After move CS location the restore the back up data .
How to move registrated CS 2/2
CS-Web
Master
Slave1Slave2
Slave3 Slave4 Slave5
Slave4
Move
5) Restore Back up data6) Change primary CS index to Master CS (Level1 this case) by tree survey menu, then apply the change
Note: After change CS Level, all CS which is in same
AirSync Group will be restarted
Tree Survey Menu
![Page 62: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/62.jpg)
62
Site Survey (CS)
Set up Temporally CS
![Page 63: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/63.jpg)
63
Site Survey (CS)
Locate Slave CS
![Page 64: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/64.jpg)
64
Site Survey (PS)
CS Cover area check
![Page 65: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/65.jpg)
65
Site Survey (PS)
How to set CS as Maintenance Mode
![Page 66: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/66.jpg)
66
Site Planning tool
How to use Site planning tool
General Information
1) This tool assist you planning CS location on your site2) The tool can be downloaded from CS-Web page
How to use
1) Prepare Site Map information by jpg format2) Then Step1: Load Site Map information to planning tool Step2: Scaling of the Circle Step3: Generation the Service Aria Circle Step4: Deployment Planning Step5: Repeat Step3 &4 until complete planning
1.
2.
3.
4.
Repeat This Step
![Page 67: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/67.jpg)
67
PS Function List
Detail Function LIST (1)
PS FunctionFollowing table show PS function Overview
Feature NT 3XX
SIP based
Remark for SIP DECTSIP-MLTUT13X,2XX
SIP-SLTUT113,123
SIP-DECT(UDS1XX)
DID/DIL incoming call Yes Yes Yes YesInternal Call Block Yes Yes Yes YesRing Tone Pattern Selection Yes Yes Yes Yes Selected by PS MenuCall Waiting
Yes Yes Yes YesNo 'Call Waiting Caller ID' on display;
Idle Extension Hunting Yes Yes Yes YesOutside Destinations in ICD Yes Yes Yes YesQueuing Feature
Yes Yes Yes Yes'Hurry-Up' key is not available.
VIP Call Yes Yes Yes YesLog-in/Log-out
Yes Yes Yes YesFF key has to be programmed in NS1000 Web-MC
Call Forwarding (FWD) Yes Yes Yes YesDo Not Disturb (DND) Yes Yes Yes YesFWD/DND Button, Group FWD Button
Yes Yes Yes Yes'Group FWD' key is not available.
![Page 68: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/68.jpg)
68
Detail Function LIST (2)
Feature NT 3XXSIP based
Remark for SIP DECTSIP-MLTUT13X,2XX
SIP-SLTUT113,123
SIP-DECT(UDS1XX)
Line Preference. Incoming Yes No No NoCall Pickup - Directed, Group Yes Yes Yes YesHands-free Answerback Yes Yes Yes YesAutomatic Extension Release Yes Yes Yes YesEmergency Call Yes Yes Yes YesAccount Code Entry Yes Yes Yes YesDial Type Selection Yes Yes Yes YesPause Insertion
Yes Yes Yes No'Pause' key is not available..
Line Preference. OutgoingYes Yes No Yes
FF key has to be programmed in PBX
Trunk AccessYes Yes Yes Yes
FF key has to be programmed in PBX
One-touch DialingYes Yes No Yes
FF key has to be programmed in PBX
Last Number Redial Yes Yes Yes YesSpeed Dialing. Personal/System
Yes Yes Yes YesPersonal Download: N/A for SIP-DECT
Hot Line Yes No No No
![Page 69: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/69.jpg)
69
Detail Function LIST (3)
Feature NT 3XXSIP based
Remark for SIP DECTSIP-MLTUT13X,2XX
SIP-SLTUT113,123
SIP-DECT(UDS1XX)
PDN/ SDN Yes No No NoAutomatic Callback Busy Yes No No No Alternative:Use CA
insteadExecutive Busy Override Yes No No FutureCall Monitor Yes No No FutureCall Waiting Tone Yes Yes Yes YesOff-hook Call Announcement No No No NoWhisper OHCA Yes No No NoToll Restriction (TRS)
Call Barring (Barring)Yes Yes Yes Yes
Budget Management Yes Yes Yes YesExtension Dial Lock Yes Yes Yes YesDial Tone Transfer Yes No No NoWalking COS Yes No No NoVerification Code Entry Yes Yes Yes YesAutomatic Route Selection Yes Yes Yes YesHands-free Operation Yes Yes Yes YesOff-hook Monitor Yes Yes Yes NoMute Yes Yes Yes Yes
![Page 70: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/70.jpg)
70
Detail Function LIST (4)
Feature NT 3XXSIP based
Remark for SIP DECTSIP-MLTUT13X,2XX
SIP-SLTUT113,123
SIP-DECT(UDS1XX)
Headset Operation Yes Yes Yes YesData Line Security Yes Yes Yes NOFlash/Recall/Terminate Yes Yes* Yes YesExternal Feature Access Yes Yes Yes YesTrunk Call Limitation Yes Yes Yes Yes Drop the call without alarm(CPC) Signal Detection Yes Yes Yes YesCall Transfer Yes Yes Yes YesCall Hold Yes Yes Yes YesCall Park
Yes Yes Yes YesFF key has to be programmed in PBX
Call Splitting Yes Yes Yes YesMusic on Hold Yes Yes Yes YesConference
Yes Yes Yes YesSIP-MLT/SLT: hard "Conf" key, no LED, SIP-DECT: Function Menu, no LED 」
Privacy Release Yes No No NoPaging
Yes Yes Yes Yes SIP-SLT and SIP-DECT can not be paged
![Page 71: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/71.jpg)
71
Detail Function LIST (5)
Feature NT 3XXSIP based
Remark for SIP DECTSIP-MLTUT13X,2XX
SIP-SLTUT113,123
SIP-DECT(UDS1XX)
Conference Group Call Yes Yes Yes Yes
SIP-MLT/SLT SIP-DECT can be a coordinator
Door phone Call Yes Yes Yes YesDoor Open Yes Yes Yes YesTrunk Answer From Any Station Yes No No NoBackground Music (BGM) Yes No No NoOutgoing Message (OGM) Yes Yes Yes YesDirect Inward System Access Yes Yes Yes YesExternal Sensor Yes No No NoExternal Relay Control Yes No No No
Caller ID Yes Yes Yes YesIncoming Call Log Yes Yes Yes YesMessage Waiting Yes Yes Yes YesAbsent Message
Yes Yes Yes YesNo absent message information on LCD while calling.
![Page 72: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/72.jpg)
72
Detail Function LIST (6)
Feature NT 3XXSIP based
Remark for SIP DECTSIP-MLTUT13X,2XX
SIP-SLTUT113,123
SIP-DECT(UDS1XX)
Fixed Buttons Yes Yes Yes Yes Same limitation as UTFlexible Buttons Yes Yes No YesLED Indication Yes Yes Yes YesDisplay Information Yes Yes Yes YesCalling/Connected Line Identification Presentation
Yes Yes Yes Yes
Advice of Charge (AOC)Yes Yes Yes Yes
No Charge information on LCD.
Built-in SVM Yes Yes Yes YesVoice Mail (VM) Group Yes Yes Yes YesVoice Mail DTMF Integration Yes Yes Yes Yes2WAY-REC Yes No No No2WAY-Transfer Yes No No NoVM-Transfer Yes No No NoLive Call Screening (LCS) Yes No No No
![Page 73: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/73.jpg)
73
Detail Function LIST (7)
Feature NT 3XXSIP based
Remark for SIP DECTSIP-MLTUT13X,2XX
SIP-SLTUT113,123
SIP-DECT(UDS1XX)
PS Ring Group - - - YesPS Directory - - - YesPS Feature Buttons - - - YesWireless XDP Parallel Mode Yes Yes Yes Yes Only support parallel ringingSMDR Yes Yes Yes YesPrinting Message Yes No No NoCall Charge Services Yes Yes Yes YesCall Billing for Guest Room Yes Yes Yes YesExtension Personal Identification Number
Yes Yes Yes Yes
Extension Feature Clear Yes Yes Yes YesWalking Extension Yes No No NoEnhanced Walking Extension Yes No No NoTimed Reminder Yes No No No
![Page 74: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/74.jpg)
74
Detail Function LIST (8)
Feature NT 3XXSIP based
Remark for SIP DECTSIP-MLTUT13X,2XX
SIP-SLTUT113,123
SIP-DECT(UDS1XX)
Confirmation Tone Yes Yes Yes YesCalling/Connected Line Identification by QSIG
Yes Yes Yes YesCOLP/CONP is not available.
Call Forwarding (CF).by QSIG Yes Yes Yes YesCall Transfer (CT) by QSIG Yes Yes Yes YesCompletion of Calls to Busy Subscriber (CCBS).by QSIG
Yes No No No
Network Direct Station Selection Yes No No NoCentralized Voice Mail Yes Yes Yes YesNetwork ICD Group Yes Yes Yes YesPeer-to-Peer Connection Yes Yes Yes YesSelf Labeling No Yes No NoComputer Telephony Integration
Yes Yes Yes Yes
Following enhanced CTI functions are not available -SetDisplay -ButtonPressetc.
Communication Assistant Yes Yes Yes Yes
![Page 75: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/75.jpg)
75
Detail Function LIST (9)
Feature NT 3XXSIP based
Remark for SIP DECTSIP-MLTUT13X,2XX
SIP-SLTUT113,123
SIP-DECT(UDS1XX)
Class of Service (COS) Yes Yes Yes YesGroup Yes Yes Yes YesTenant Service Yes Yes Yes Yes
Time Service Yes Yes Yes Limited
Only do "change the time mode (Day/Night/Lunch/Break)“ by feature access code.
Operator Features Yes Yes Yes YesManager Features Yes No No NoSystem Redundancy Yes Yes Yes Yes
Terminal redandancyYes Yes Yes Yes
Require to set an external NTP server.
Stand alone operationYes Yes Yes Yes
![Page 76: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/76.jpg)
76
END
20121107-01 SIP based DECT_Rev1.2_7Nov_fukuda.pptx - 1st release
20121202-02 SIP based DECT_Rev1.3_2Dec_fukuda.pptx - Change #66 Time service line
20121203-03 SIP based DECT_Rev1.4_3Dec_fukuda.pptx - Add Firmware update process
20121203-04 SIP based DECT_Rev1.5_6Dec_fukuda.pptx - Change PS registration process as a note Page #45 - Correct model name at SIP based. Wrong:133 -> Correct:113 Page #63-71- Correct description about flexible key configuration at Remark of SIP DECT, Page #63,64,66-Add LED information of Site survey mode- Add Site Survey operation in more detail
20121203-05 SIP based DECT_Rev1.6_ 18Dec_fukuda.pptx - Change Syn Group explanation for One Look System (Page12 ) - Add caution when change CS-Air Setting, the CS will be restarted automatically
20121203-10 SIP based DECT_Rev1.7_ 10Jan2013.pptx - Corrected Function List checked by Development team
20130124-01 SIP based DECT_Rev1.8_ 24Jan2013.pptx - Change CS layer ,limitation from 4 to 8(Page 63)
![Page 77: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/77.jpg)
77
END
2013 02-25 SIP based DECT_Rev1.9 25 Dec 2013 - Changed Page 12 Ring group 28 -> 128
2013 02-25 SIP based DECT_Rev1.9 25 Dec 2013 - Changed Page 33 LED indication explanation
2013 02-25 SIP based DECT_Rev1.9 25 Dec 2013 - Changed Page 33 Add LOGIN and PASSWORD Information
2013 02-25 SIP based DECT_Rev1.9 25 Dec 2013 - Changed Page 38 Correct Step and screen shot
2013 02-25 SIP based DECT_Rev1.9 25 Dec 2013 - Changed Page 39 Change explanation
2013 02-25 SIP based DECT_Rev1.9 25 Dec 2013 - Changed Page 40 Change explanation
2013 02-25 SIP based DECT_Rev1.9 25 Dec 2013 - Changed Page 44 Change explanation
2013 02-25 SIP based DECT_Rev1.9 25 Dec 2013 - Changed Page 45 Change screen shot
![Page 78: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/78.jpg)
78
END
2013 02-25 SIP based DECT_Rev1.9 25 Dec 2013 - Changed Page 45 Change explanation
2013 02-25 SIP based DECT_Rev1.9 25 Dec 2013 - Changed Page 46 Change explanation
2013 02-25 SIP based DECT_Rev1.9 25 Dec 2013 - Changed Page 48 Change explanation
![Page 79: SIP-Based-DECT Rev1.9 25 Feb., 2013. 2 Table of Contents 1. Overview 2. Specification and Features 3. Air Synchronization 4. Registration 1. Installation](https://reader037.vdocuments.us/reader037/viewer/2022110401/56649e255503460f94b1390a/html5/thumbnails/79.jpg)
79
END