simple, fast and accurate solvent-free method for produced water process monitoring
DESCRIPTION
Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring. What is produced water?. Water that comes to the surface with oil and gas Contains many chemical constituents – Salt content (salinity, total dissolved solids, electrical conductivity) – Oil and grease - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/1.jpg)
Simple, Fast and Accurate Solvent-free Method for
Produced Water Process Monitoring
![Page 2: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/2.jpg)
What is produced water?Water that comes to the surface with oil and
gas
• Contains many chemical constituents– Salt content (salinity, total dissolved solids, electrical conductivity)– Oil and grease
• Composite of many hydrocarbons andother organic materials
– Toxics from various natural inorganic and organic compounds or chemical additives– NORM– Some oxygen demanding materials
![Page 3: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/3.jpg)
U.S• Oil and grease limit used as a “surrogate” for
other pollutants
– When oil and grease are controlled, other pollutants will also be controlled
• Limit is based on a statistical analysis of data from 60 U.S. platforms
– Monthly average = 95th percentile = 29 mg/l
– Daily maximum = 99th percentile = 42 mg/l
Limits based on the Freon Extraction method
![Page 4: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/4.jpg)
Method comparison• Old protocol
– IR Technique– Freon extraction – kept light ends
D
![Page 5: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/5.jpg)
Method comparison• New Technique – EPA 1664
– Hexane extraction– Distill off the hexane
• Loss of light ends
– Weigh the residue
Hexane
![Page 6: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/6.jpg)
A2 Test Methodology• Filter water through a PTFE filter
• Mass loading• Highly efficient• Even distribution• Quick drying
![Page 7: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/7.jpg)
Filter Method• Analysis time– 30 seconds
• No solvents
• Easy disposal
• Easy cleanup
D
![Page 8: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/8.jpg)
PAL Spectrometer
![Page 9: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/9.jpg)
1. Place Sample on window
3. Analyze the sample
2. Rotate TumblIR into place
4. Cleaning is easy!
No Sample Prep Required, No Training Required
![Page 10: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/10.jpg)
Why FT-IR for Lubrication Analysis? • Water• Additive depletion
– Antioxidant• Phenolic• Aminic• EP/AW
• Oxidation• Nitration
– Varnish formation
![Page 11: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/11.jpg)
IRDetector
Scatter
Large droplets => IR scatteredA
IRDetector
Small droplets => IR absorbedB
Water in oil
Before surfactant Before surfactant
![Page 12: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/12.jpg)
A
B
Surfactant effect
• Minimizes transfer loss from container to container
• Ensures consistency in amount of oil measured
Before
After
![Page 13: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/13.jpg)
1500 1480 1460 1440 1420 1400 1380 1360 1340
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
Abs
orba
nce
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
Abs
orba
nce
Before surfactant
After surfactant
Surfactant Effect
![Page 14: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/14.jpg)
30ppm Oil in Water IR Absorbance (Filter) with Variable Concentrations of Oil Stabilizer With Pathlength Correction
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
0.45
0 0.25 0.5 1 2
Oil Stabilizer Concentration (Arbitrary Units)
Ave
rag
e A
bso
rban
ce a
t 13
77
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
Rel
ativ
e S
tan
dar
d D
evia
tio
n o
f 13
77 A
bso
rban
ce
Average Abs 1377
Standard Deviation
![Page 15: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/15.jpg)
Gravimetrically Prepared Oil in Water Standards Used for FT-IR Calibration and Method Development
1. Oil dilution standards gravimetrically prepared in IPA2. Appropriate volumes added to a thoroughly cleaned
1000mL volumetric flask3. The IPA solvent is evaporated at 50°C under vacuum4. Dried flask is filled to the mark with distilled water5. 250uL of Oil Stabilizer additive is added6. Sample is vigorously shaken by inversion for 1-2min7. Transfer solution to cleaned 1L sample jar, shaking the
flask vigorously after ¾ of the solution is transferred
![Page 16: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/16.jpg)
Methodology
![Page 17: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/17.jpg)
Filter
![Page 18: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/18.jpg)
FT-IR Spectrum of Mineral Oil
29
58.1
29
25.8
28
56.0
14
61.9
13
77.6
72
2.5
3800 3600 3400 3200 3000 2800 2600 2400 2200 2000 1800 1600 1400 1200 1000 800 600
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Wavenumber
Abs
orba
nce
![Page 19: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/19.jpg)
1750 1700 1650 1600 1550 1500 1450 1400 1350
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Wavenumber
Abs
orba
nce
Calibration Set
Standard Name Oil (ppm) Oil Stabilizer
OIWa1 0.0 YesOIWa5 0.5 YesOIWa7 1.0 YesOIWa8 5.0 YesOIWa24 10.0 YesOIWa25 12.5 YesOIWa11 15.0 YesOIWa12 20.0 YesOIWa13 30.0 YesOIWa23 45.0 Yes
![Page 20: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/20.jpg)
Actual Concentration
Pre
dict
ed C
once
ntra
tion
R2=0.9957
![Page 21: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/21.jpg)
Actual Concentration
Pre
dict
ed C
once
ntra
tion
R2=0.9957
![Page 22: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/22.jpg)
Oil in Water Validation Set Prediction Results
SamplePredicted Oil Conc. (ppm)
Actual Oil Conc. (ppm)
Absolute Difference
Relative Error (%)
OIWA 6 Instr 1 Rep 1 0.81 0.75 0.06 8.5%OIWA 6 Instr 1 Rep 2 0.77 0.75 0.02 2.2%OIWA 6 Instr 2 Rep 1 0.84 0.75 0.09 12.3%OIWA 6 Instr 2 Rep 2 0.79 0.75 0.04 5.5%OIWA 9 Instr 1 Rep 1 7.81 7.50 0.31 4.2%OIWA 9 Instr 1 Rep 2 7.80 7.50 0.30 4.0%OIWA 9 Instr 2 Rep 1 8.05 7.50 0.55 7.3%OIWA 9 Instr 2 Rep 2 7.07 7.50 0.43 5.8%OIWA 15 Instr 1 Rep 1 2.88 3.00 0.12 4.1%OIWA 15 Instr 1 Rep 2 2.82 3.00 0.18 5.9%OIWA 15 Instr 2 Rep 1 2.88 3.00 0.12 4.1%OIWA 15 Instr 2 Rep 2 3.12 3.00 0.12 3.9%OIWA 19 Instr 1 Rep 1 19.32 17.50 1.82 10.4%OIWA 19 Instr 1 Rep 2 19.72 17.50 2.22 12.7%OIWA 19 Instr 2 Rep 1 19.57 17.50 2.07 11.8%OIWA 19 Instr 2 Rep 2 19.18 17.50 1.68 9.6%
Total 7.0%Low 5.8%High 8.2%The limit of detection for this method is 0.10ppm (100ppb)
![Page 23: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/23.jpg)
14
63.2
13
77.4
1520 1500 1480 1460 1440 1420 1400 1380 1360 1340 1320
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
Wavenumber
Abs
orba
nce
Standard1463cm-1 Abs
1377cm-1 Abs
30ppm Rep1 2.317 0.39930ppm Rep2 2.289 0.39630ppm Rep3 2.269 0.39130ppm Rep4 2.268 0.391Rel Standard Deviation 1.004886 1.001287
![Page 24: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/24.jpg)
Sample Identification Oil & Grease and Petroleum Hydrocarbons
(mg/L)
Actual Oil Concentration
(mg/L)
A2 Oil Predictions
Method Date Tested
Water #1A (OIWA, no Acid) 10.7 5 5.1 EPA 1664 12/31/2008Water #1B (OIWA, no Acid) <1.0 1 1.1 EPA 1664 12/31/2008Water #1C (OIWA, no Acid) 1 0 0.0 EPA 1664 1/5/2009Water #1D (OIWA, no Acid) 1.6 15 15.8 EPA 1664 1/5/2009Water #1E (OIWA, no Acid) 19.2 20 19.9 EPA 1664 1/5/2009
0
5
10
15
20
25
0 5 10 15 20 25
Series1
Series2
![Page 25: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/25.jpg)
Additional capabilities
• Water in crude oil– 0.1 – 0.3% level– Keeps pipes from corroding
• Water in crude oil– 1% – 50%– Allows dewatering/production validation etc
• Water/Glycol mix analysis– Drilling fluid
![Page 26: Simple, Fast and Accurate Solvent-free Method for Produced Water Process Monitoring](https://reader035.vdocuments.us/reader035/viewer/2022062517/56812d7c550346895d929075/html5/thumbnails/26.jpg)
Conclusions