simocode pro presentation for simodode_dp customers

SIMOCODE proSIRIUS Motor ManagementAs of 09/2004

Automation and DrivesSIMOCODE proAs of 09/04(This document is subject to changes)Low-Voltage Controls & DistributionStarting SituationSystemComponentsFunctionsIntegrationPracticeInformation

SIMOCODE-DP Has Undergone Advancement Additional and New FeaturesRemovable current transformer

Additional control functions

Voltage detection up to 690 V

Power and cos-phi

Temperature detection (Pt100/ Pt1000)

Analog input/output

Measuring curves recording

Graphical parameterization

PlusplusplusCompatible with SIMOCODE-DP!Starting Situation


Starting Situation Motor management systems Smaller Function scope Larger I/O solutions, communication-capableSIMOCODE-DPSound price/performance YesterdaySIMOCODE-DP the standardStarting Situation


Starting SituationNew requirementsSIMOCODE-DP TodayRequest for reduced price or expanded functionsStarting SituationMotor management systemsI/O solutions, communication-capable Smaller Function scope Larger


Starting SituationExpanded customized functionsSIMOCODE pro V variableSIMOCODE-DPSIMOCODE pro C compact TomorrowDivision into two systems for consistent and cost-favorable customized functionality Starting Situation Smaller Function scope Larger

System SIMOCODE pro


The System SIMOCODE pro C CompactThe compact system for:

Direct starters and Reversing startersUp to 80 % of all present SIMOCODE-DP applications at a price reduction of 20 %.System


Control circuitAutomation systemThe Design of SIMOCODE pro Motor FeedersMain circuit SIMOCODE pro C CompactSystem


The System SIMOCODE pro V Variable The variable system with:

All control functions andVariably expandable additional functionsSystem


The Design of SIMOCODE pro Motor FeedersMain circuitControl circuit SIMOCODE pro V Variable Automation systemSystem


The System has been designed for mixed operation.Targeted combination of SIMOCODE pro C and SIMOCODE pro V in the same switchgear, depending on the individual functional requirements

SIMOCODE pro C is fully upward-compatible with SIMOCODE pro V

A mixed application in the same switchgear does not produce extra costs it saves costs!No re-wiring is required (removable terminals)

The current measuring module can remain in the main circuit

No additional engineering is required (identical terminals)

The pro C parameterization can be adopted unchanged

pro V utilizes the same components as pro C (stock-keeping)I.e. with a conversion to SIMOCODE pro V:System


The SystemSystem

The Components SIMOCODE pro


The Components SIMOCODE pro C CompactComponents


The ComponentsOperator Panel5 buttons / 10 LEDsCurrent Measuring ModuleBasic Unit 20.3 A 630 AStraight-through/busbar connection technology4 I / 3 O binaryThermistorPROFIBUS-DP24 V DC / 110 240 V UC Connection CableIn various lengths (up to 2 m) SIMOCODE pro V Variable Components


0.3 3 A2.4 25 A10 100 A20 200 A63 630 A *)The Current RangesBusbar connectionStraight-through transformer0.3 A or higher

Current Measuring Modules for all motor currents45 mm55 mm120 mm145 mmWidths:*) With 3UF18 intermediate transformers up to 820 AComponents


The Voltage Range0.3 3 A2.4 25 A/ 690 V10 100 A/ 690 V

20 200 A/ 690 V

63 630 A*)/ 690 V

Busbar connectionStraight-through transformerUp to 690 V

Current/Voltage Measuring Modules *) With 3UF18 intermediate transformers up to 820 A45 mm55 mm120 mm145 mmWidths:Components


Variably Expandable Additional Functions Expansion modules for SIMOCODE pro V Up to 5 expansion modules can be connected to the Basic Unit 2:Components


Variably Expandable Additional Functions Expansion modules for SIMOCODE pro V Temperature Module for: Max.1Temperature monitoring of up to 3 analog temperature sensors (e.g.: Pt100/ Pt1000)New!

ComponentsUp to 5 expansion modules can be connected to the Basic Unit 2:


Smaller Dimensions Including expanded functionality SIMOCODE proSIMOCODE-DP96 mm60 mmImproved scaling accuracyAll digital modules are combinableAdditional functionsComponents

The Functions SIMOCODE pro


The FunctionsComprehensive motor feeder protection + flexible control!SIMOCODE pro integrates the following features in only one system:

Multifunctional electronic motor protection

Flexible software for motor control

Detailed operating, service and diagnostics data

Communication via PROFIBUS-DP

SIMOCODE pro is a flexible and modular motor management system for motors used in low-voltage applications. Based on SIMOCODE-DP. Functions


The FunctionsFunctionsProtective functions

Overload protection (Class 5 - 40) Thermistor motor protection Phase failure monitoring Unbalance protection Stall protection Earth-fault monitoring Monitoring of current limit values Monitoring of operating hours Monitoring of motor stop times Number-of-starts monitoring Etc.

Expanded monitoring functions:

Temperature monitoring Pt100/ Pt1000 Voltage monitoring Power monitoring Cos-phi monitoring Phase sequence detection Input, output and monitoring 0/4-20 mA signal

Measuring curves recordingControl functions

Direct online starter Reversing starter Star-delta starter Star-delta starter with reversal of rotational direction Two speeds, motors with separate windings (pole changeover switch), also with reversal of rotational direction Two speeds, motors with separate Dahlander windings, also with reversal of rotational direction Solenoid valve actuation Positioner actuation Soft starter actuation Soft starter actuation with reversal of rotational direction Logic modules (truth tables, counters, timers, edge evaluation, limit monitoring...) and Standard functions (power failure monitoring, emergency start, external faults ...) More functions than ever before.


The FunctionsFunctions Phase failure monitoring Unbalance protection Stall protection Earth-fault monitoring Monitoring of current limit values Monitoring of operating hours Monitoring of motor stop times Numbers-of-starts monitoring Etc.

Expanded monitoring functions:

Temperature monitoring Pt100/ Pt1000 Voltage monitoring Power monitoring Cos-phi monitoring Phase sequence detection Input, output and monitoring 0/4-20 mA signal

Measuring curves recordingControl functions

Direct online starter Reversing starter Star-delta starter Star-delta starter with reversal of rotational direction Two speeds, motors with separate windings (pole changeover switch), also with reversal of rotational direction Two speeds, motors with separate Dahlander windings, also with reversal of rotational direction Solenoid valve actuation Positioner actuation Soft starter actuation Soft starter actuation with reversal of rotational direction Logic modules (truth tables, counters, timers, edge evaluation, limit monitoring...) and Standard functions (power failure monitoring, emergency start, external faults ...) Whats New.


The DataFunctionsService data

Motor operating hours Motor stop times Number of motor starts Number of overload trips Unit-internal storage of comments Unit operating hours Etc.Operating data

Motor switching state (on, off, left, right, slow, fast) Current in phase 1, 2, 3 and max. current Voltage in phase 1, 2, 3 Effective power Apparent power Power factor Phase unbalance Phase sequence Time to trip Motor model heating Remaining motor cooling time Temperature (e.g. motor temperature) Current analog signal value Etc.Diagnostics data

Numerous detailed early warning and fault messages, also for further processing within the device or the control system Device-internal fault logging with time stamp Time stamp marking of individually selectable status, warning and fault messages Value of the last tripping current Checkback faults (e.g. no current flow in the main current circuit after ON control command) Etc.Communication

12 Mbps , automatic baud rate detection Time synchronization Cyclic and acyclic services Even more detailed information on the motor feeder.


The DataFunctionsService data

Motor operating hours Motor stop times Number of motor starts Number of overload trips Unit-internal storage of comments Unit operating hours Etc.Operating data

Motor switching state (on, off, left, right, slow, fast) Current in phase 1, 2, 3 and max. current Voltage in phase 1, 2, 3 Effective power Apparent power Power factor Phase unbalance Phase sequence Time to trip Motor model heating Remaining motor cooling time Temperature (e.g. motor temperature) Current analog signal value Etc.Diagnostics data

Numerous detailed early warning and fault messages, also for further processing within the device or the control system Device-internal fault logging with time stamp Time stamp marking of individually selectable status, warning and fault messages Value of the last tripping current Checkback faults (e.g. no current flow in the main current circuit after ON control command) Etc.Communication

12 Mbps , automatic baud rate detection Time synchronization Cyclic and acyclic services Whats New.

Integration & Configuration SIMOCODE pro


Integration & ConfigurationSIMATIC S7 PCS7PROFIBUS-DPOthersystemsTotally IntegratedSIMOCODE pro In any automation system. As with SIMOCODE-DP and with compatibility modeIntegration


PROFIBUS-DPSIMOCODE proIntegration & Configuration SystemControl cabinetMachine / system Easy and fast with SIMOCODE ES. Integration


For a more detailed description of the configured functions, comments can be embedded. Clearer structure with SIMOCODE ES Graphic. Integration & ConfigurationRepresentation of a preliminary version! Integration


Integration & ConfigurationPROFIBUS-DPEngineering stationOperator stationMaintenance stationPower Management SystemControl cabinetMachine / system In any system configuration. SIMOCODE ESSIMATIC PCS 7Integration


Integration & ConfigurationPROFIBUS-DPEngineering stationMaintenance stationPower ManagementOperator station System In any system configuration. SIMOCODE ES GraphicSIMATIC PDMMachine / systemIntegrationControl cabinet


Integration & ConfigurationPROFIBUS-DPMaintenance / Power ManagementOperator stationEngineering station System In any system configuration. SIMARIS ManagerSIMOCODE ESMachine / systemIntegrationControl cabinet


Addressing Plug for assignment of PROFIBUS address without PC/ PGIntegration & Configuration Small auxiliary equipment with large time-saving potentials. Assignment of a PROFIBUS address to one or several basic units within seconds.Integration

The Practice SIMOCODE pro


The PracticeSpace-saving FlexibleReliableCommunication-capableRequirements: Low-voltage switchgear with SIMOCODE pro Practice


The PracticeInstallation of the Current Monitoring Module beside the Basic Unit.Practice Withdrawable-unit with SIMOCODE pro


The PracticePlug-in unit up to 25 A with a height of 50 mm. (Current Monitoring Module behind the Basic Unit)Practice In-line plug-in module with SIMOCODE pro

Information SIMOCODE pro


InformationInformation www.siemens.com/simocode

*Caution: The present slide set contains 3D objects. Their correct representation requires the installation of the o2c player! (Refer to directory ..\o2c or visit www.o2c.com)As information material for our customers, we particularly recommend the Conversion flyer and the product brochure.***Reduced price: E.g. for customers who want to replace their conventional switchgear by communication-capable switchgear but are, however, not willing to pay the costs for such replacement.Expanded functions: E.g. power management (voltage, power, cos-phi....)****Design of SIMOCODE pro CEvery system is always equipped with a basic unit as basic component and a separate current monitoring module per each feeder. Both modules are electrically interconnected by means of a connection cable and, as with SIMOCODE-DP, can optionally be mechanically connected as a unit (back-to-back) or can be mounted separately (side-by-side). Thanks to the separation of the basic unit and the current detection, the main circuit may now have a distance of up to 2 m to the respective control circuit. Due to the separate current detection, the motor current to be monitored only influences the selection of the respective current monitoring module. Optionally, an operator panel for cabinet door mounting can be connected to the basic unit. The current monitoring module and the operator panel are electrically fed by the basic unit. No additional wiring is required. *Note: SIMOCODE pro V is downward-compatible with SIMOCODE pro C and, in addition to all SIMOCODE pro C functions, offers many additional functions. The parameterization of SIMOCODE pro C can be adopted unchanged.*Design of SIMOCODE pro VThe design corresponds to SIMOCODE pro C.However: Compared with basic unit 1 (SIMOCODE pro C), the basic unit 2 (SIMOCODE pro V) can be extended by additional inputs/outputs and functions with the help of various optional expansion modules. Consequently, special functions such as, e.g. earth fault detection with a summation current transformer, can be applied only where they are required.

****Basic Unit 1 (BU 1) as basic componentThe basic unit forms the basic component of the SIMOCODE pro C system.The approximate bisection of the width compared to the previous device to a width of merely 45 mm is an essential novelty. The new wide-voltage range (110 240 V AC/DC) for the supply voltage grants enhanced application flexibility. As a matter of course, a 24 V DC version is also available.Practical - the thermistor connection integrated in the basic units. Additional evaluation units can therefore be dispensed with. The features known from SIMOCODE-DP such as 4 binary inputs (24 V DC internal supplied), the 3 monostable relay outputs as well as the PROFIBUS-DP connections are also embedded in both basic units (SUB-D and terminal connection).

Note: Now one relay output less at the basic device.

The operator panel (OP) facilitates motor feeder control via the control cabinet Halved height identical width ... and yet expanded functionality! With a surface of only 36 x 96 mm (H x W), the new operator panel can replace 5 conventional pushbuttons and 10 LEDs. With the now freely assignable 4 pushbuttons and 7 LEDs, the new operator panel now offers an even expanded functionality while offering space savings of up to 50 % in comparison with the previous devices.

Note: One additional pushbutton and additional LEDs and still reduced space requirements. *Current monitoring module and operator panel as with SIMOCODE pro C.

Basic Unit 2 (BU 2) as basic componentAll terminals as with BU 1.However: The BU 2 offers more functions and the option of connecting the described expansion modules.Furthermore, also a current/voltage measuring module can be applied instead of the current measuring module (voltage/power measuring, etc.) with these units.

Note: The BU 2 has a larger mounting depth than the BU 1. *Current Measuring Modules(IM)The current detection which is now separated from the basic units facilitates a far more flexible integration in the motor feeder. Thanks to connection cables with a length of up to 2 m, the main circuit can now have a somewhat longer distance to the control circuit. This makes SIMOCODE pro applicable also in very confined environments. The extended and noticeably overlapping current ranges as of 0.3 A are a particular novelty. The mechanical connection of the basic unit and the current measuring module as one unit as with SIMOCODE-DP is also possible for current measuring modules up to 100 A.

New: The 20 200 A current measuring module is now available either with straight-through transformer or with busbar connection technology.

*Current/Voltage Measuring Modules(UM)Similar to the current measuring modules, however, with the option of detecting the string voltages within the main circuit by the additional wiring of 3 conductors.The application of a current/voltage measuring module facilitates the measuring, processing and monitoring of power-related parameters. (Apparent power, effective power, power factor, phase sequence .)

Note: A mechanical connection of the BU with a UM is not possible. Side-by-side mounting.*Expansion by additional binary I/Os or bistable relay outputs As with SIMOCODE-DP, the basic unit can be expanded by additional binary inputs or relay outputs which can later be assigned to any functions within the system in accordance with the users individual requirements. Other than with SIMOCODE-DP, this can now be realized in two steps by means of up to two digital modules with a width of 22.5 mm. In other words: With SIMOCODE pro, the adequate replacement of an expansion module known from SIMOCODE-DP requires only 50 % of the space! In addition, the versions listed below can be flexibly combined and are applicable at the same basic unit:Digital module: 4 inputs, external supply with 24 V DC and 2 monostable relay outputsDigital module: 4 inputs, external supply with 110 240 V AC/DC and 2 monostable relay outputsDigital module: 4 inputs, external supply with 24 V DC and 2 bistable relay outputsDigital module: 4 inputs, external supply with 110 240 V AC/DC and 2 bistable relay outputsExpansion by earth fault monitoring with summation current transformer A decision between an earth fault detection or thermistor motor protection is no longer required! This is the solution: Both functions can be integrated in the same feeder within only one system if required by the user! The basic unit 2 (SIMOCODE pro V) can additionally be expanded by a earth fault module (22.5 mm). By means of a summation current transformer, an even more accurate external earth fault monitoring can thus be realized. The advantage a summation current transformer used with SIMOCODE-DP can remain in the main current circuit and be further used with SIMOCODE pro. The tripping behavior thus remains unchanged.

*Expansion by analog temperature detection and monitoringBeside temperature monitoring using binary PTC resistors, motors are often also monitored via analog temperature sensors. Irrespective of the thermistor motor protection, the new temperature module (22.5 mm) facilitates the connection of up to three analog temperature sensors (e.g.: Pt100/ Pt1000) to the SIMOCODE pro V system. SIMOCODE pro V detects and monitors the current motor temperature and forwards it to the automation system.

Note: Sensor measuring circuits in three-conductor technology. Within the system, only one temperature (the max. temperature) of all measuring circuits is available.

Expansion by an analog input and output (0/4 20mA)Are filling levels, flowrates or positions also to be detected and monitored? If so, SIMOCODE pro offers the suitable expansion module. The optional analog module (22.5 mm) facilitates the detection, monitoring and output of a 0/4 20 mA signal and offers free access to the automation system via PROFIBUS-DP.

Note:

The analog output can be assigned with any analog value available within the system (e.g. current motor temperature, phase current, voltage, actual timer value, actual counter value, etc.).

The conversion of a 420 mA signal into a 020 mA signal is also possible (and, of course, the other way around).

***All functions known from SIMOCODE-DP have been revised and improved in terms of flexibility. Many new functions have been integrated.

*Protective and monitoring functionsAlmost all protective and monitoring functions are now designed as multi-step solutions (advance warning and fault) and offer a delay option.

Control functions The control functions known from SIMOCODE-DP + new control functions (refer to the next page). **The dataWith these data, you receive an even more comprehensive picture of your motor feeder and are always up-to-date. The additionally integrated maintenance-relevant functions support the maintenance and service personnel.***Compatibility: SIMOCODE-DP SIMOCODE proSimultaneous operation at the bus/ unit replacementMust the otherwise necessary adaptations in the control system be restricted to a minimum or even avoided within the scope of a system expansion or unit replacement ? SIMOCODE pro offers the solution!

Integration into the automation systemA system expansion or unit replacement by an advanced generation of communication-capable motor management and control devices must, especially in highly available processes, not automatically lead to extensive configuration tasks within the automation system or even to system downtimes. This is why a 3UF50 compatibility mode has been integrated in the basic unit 2 (SIMOCODE pro V). If SIMOCODE pro V is switched to this compatibility mode, data exchange is realized via PROFIBUS without affecting the automation system as with a respective SIMOCODE-DP. I.e. the automation system is continuously supplied with the required data without any additional expenditures although, within the field, SIMOCODE pro V is applied.

ParameterizationThe installation of a new GSD file, a new object manager for STEP7 or an EDD for SIMATIC PDM for device parameterization via PROFIBUS is not categorically required. SIMOCODE ES Professional offers the possibility of also realizing the parameterization via PROFIBUS-DP. The frequently available parameter files of SIMOCODE-DP can be converted into SIMOCODE ES parameter files and used for the parameterization of the new devices. (Converter) Advantage: Thanks to the device function adopted by SIMOCODE-DP and an identical parameterization, the protection, monitoring and tripping behavior of the motor practically remains unchanged. I.e. also within the field, SIMOCODE pro behaves as SIMOCODE-DP.

Result: SIMOCODE pro V behaves as SIMOCODE-DP at the bus and additionally assures an identical motor tripping behavior.

*SIMOCODE pro can be integrated into any conventional PROFIBUS-DP capable automation system.

Parameterization and diagnostics with SIMOCODE ESSIMOCODE ES is the new parameterization software for SIMOCODE pro, executable on a PC/PG under Windows 2000 or Windows XP. With SIMOCODE ES, the SIMOCODE pro motor management system offers a user-friendly and clearly structured interface with which the SIMOCODE pro can be comfortably parameterized, operated, monitored and tested both within the field or via a central station. Thanks to the display of numerous operating, service and diagnostics data, SIMOCODE ES supplies the user with significant information for maintenance or failure cases. In failure cases, faults can thus rapidly be localized and rectified. The two versions:

SIMOCODE ES Smart, for direct connection to SIMOCODE pro via the units system interface (point-to-point) by means of the new PC cable.

SIMOCODE ES Professional, for connection to one or several devices via PROFIBUS-DP or point-to-point via the system interface.

Note: SIMOCODE-DP cannot be parameterized with SIMOCODE ES. / Old PC cables cannot be used.

*SIMOCODE ES GraphicThe optional software package for SIMOCODE ES facilitates a very ergonomic and user-friendly parameterization via Drag & Drop. The inputs and outputs of the function blocks can be graphically linked and parameters can be set.Thanks to individual comments, the configured functions can be described in detail and the device parameterization can be graphically documented. This speeds up commissioning and visibly simplifies documentation.

*Besides balanced unit functions and an elaborate hardware layout, also the user friendliness of the parameterization software as well as a profound system integration play important roles. A motor management system such as SIMOCODE pro must offer optimum and rapid integration options into the most various system configurations and automation systems. Thanks to our consideration of this aspect, we can now, with SIMOCODE pro, offer you the appropriate software tools for consistent and time-saving configuration, commissioning and diagnostics.

**Thanks to the multitude of various operating and service data which SIMOCODE pro is able to supply, SIMOCODE pro is not only a motor management system which integrates the load feeder into an automated process. In parallel, it can furthermore feed power management or maintenance systems with the data required by such systems. Due to this, SIMOCODE pro also functions as an intelligent sensor within the field for these kinds of superior systems.

*Memory Module for parameterization without PC/PGDo you want to rapidly commission a new SIMOCODE pro?Especially in the motor control centers of the process industry, the availability of the motors and with it, the availability of the processes is of utmost importance. Even short downtimes often result in high costs. With the new storage module, you can rapidly commission SIMOCODE pro without any further auxiliary tools.

Note: The storage module transmits the parameters and the PROFIBUS address. / The storage module can be fed by means of a basic unit, e.g. also in the office. / It is absolutely optional. Also without plugged-on storage module and after loss of the power supply at the basic unit, SIMOCODE pro does not lose its parameterization.

Addressing Plug for PROFIBUS addressFrequently, PROFIBUS slaves are comfortably parameterized from a central station via PROFIBUS. For such remote parameterization, a PROFIBUS address is required. With the new addressing plug, any basic unit can be assigned with any PROFIBUS address within seconds, thereby ensuring the units addressability by PROFIBUS-DP. With SIMOCODE ES Professional, several SIMOCODE pro units can thus, for example, easily be commissioned via a central station.

**With SIMOCODE pro, now plug inserts with a height of 50 mm are possible.Before, only plug inserts with a height of 100 mm were applicable with SIMOCODE pro.With the illustrated control cabinet, 35 motors can now be protected and controlled. Including communication with the automation system and the function multitude and flexibility known from SIMOCODE.*Absolute mounting flexibility: Current measuring modules side-by-side with the basic unit or ...*... current measuring modules back-to-back with the basic unit.

**

simocode pro presentation for simodode_dp customers

Documents

drivessimocode proas

variable system

advancement additional

reduced price

price reduction

direct starters

reversing startersup