simm2 m presentation sp may 2009 v1
TRANSCRIPT
1
SIMSIMM2MM2M
Network QoS & LBS platform for M2M applications
Product Presentation May 2009
2
M2M Service Providers ChallengesM2M Service Providers Challenges
u Inconsistent network coverage & packet data services
u High OPEX due to network problems
u M2M customers require guaranteed service
availability and performance
u Service providers and their M2M customers need to
assure network QoS for each M2M terminal
u Using traditional technologies for, M2M end-point level
network QoS management is not practical
3
SIMM2M OverviewSIMM2M Overview
u Network Quality of Service monitoring and diagnostic platform for M2M service providers
u Data is harvested from unlimited number of M2M terminals using a:v SIM card applet (+ embedded SIM) ; or
v Collection agent embedded directly on Telit’s module
u Provides real-time insight into each M2M Unit’s:v Quality of Service
v Location and mobility
u GIS representation; User-friendly, customized web portal
4
High Level ArchitectureHigh Level Architecture
SIMM2M Backend
UMTS GSM
Web based user interface
Telit
Presence Management
SIMM2M ModulesSIMM2M Modules
Inventory Management
GIS Representation Troubleshooting Analysis
SIMM2M AlertsSIMM2M Alerts
AlertAlert Description Description Service Restore Issued upon restoration from a complete service loss
GPRS stability Issued upon excessive PDP context reconnection attempts over a predefined time period
Terminal restart Issued whenever the M2M terminal boots and attached itself to a PLMN
Reception Level degradation Issued when RX level value experienced by the M2M terminal has dropped below a preconfigured threshold
Reception Quality degradation
Issued when the RX Quality indicator value experienced by the M2M terminal has risen above a preconfigured threshold
Location/Access Technology or PLMN change
Issued following a handoff: regular serving cell change or handoff from GSM service to UMTS or PLMN change
Periodic “keep alive”reporting
A service status report following the elapsing of a predefined time period
HW replacement Issued following a change of IMEI
SIMM2M Location ServicesSIMM2M Location Services
u Provides real-time, visibility into location and mobility aspects of unlimited number of M2M terminals
u Raw information may achieve an accuracy better than 100m in urban/suburban environments
SIMM2M basic endSIMM2M basic end--point controlpoint control
CommandCommand Description Description Start Allows user to activate event driven reporting for a
specific/group of end-pointsStop Allows user to deactivate event driven reporting for a
specific/group of end-pointsReport now Allows user to initiate a request from a specific end point (or
group) to report its current service statusReset SIM card Allows user to reset a specific SIM card (or group) in the M2M
terminal and forces re-registration of the M2M terminal to the PLMN
Advanced Collection Agent ControlAdvanced Collection Agent Control
CommandCommand Description Description Set thresholds Allows the user to set the following thresholds and report triggers
data throughput, reception level and quality, network setup and disconnection events, network address changes, etc. thresholds as report triggers.
Set periodic reporting
Allows the user to set a regular report interval.
Set service counters Allows the user to set reporting based on occurrences over a time period. E.g. Excessive packet data drops, excessive terminal restarts, excessive GSM Quality threshold crossings over time.
Historic QoS statistics configuration
Allows the user to configure and control QoS parameters collected over time
Set event triggers Allows a user to configure which events and parameters a collection agent or group of agents shall be sensitive to. E.g. Signal strength, quality, restarts, coverage loss, location changes, throughput, network changes, packet data session drops, etc…
10
Data Collection & ReportingData Collection & Reporting
u Performed by a pure software based, non intrusive, energy efficient, low footprint:v SIM card applet; or
v Collection agent embedded on Telit’s GSM modules
u No impact on M2M terminal; no need for integration with M2M application
u On the fly management and configuration of data collection
u Event driven reporting and alerting
u Supports on-demand, last few days, historical and statistical information reporting
11
Unique FeaturesUnique Features
u Provides real-time, historical and statistical visibility into network performance for each M2M unit
u Allowing immediate pinpointing of failures or poor service for each endpoint or a group of endpoints
u Enables to distinguish between network and hardware related issues
u GIS based monitoring of location/mobility for each M2M terminal
u Over the air reset of the SIM card
12
Unique Benefits Unique Benefits
u Substantial decrease in service costs and on-site
technician visits
u Differentiator – pre/post sale – increases customer’s
stickiness
u Reduction in false terminal replacement and fixing
u Empowers customer service representatives to offer
better and consistent service
Compliant Modules for SIM Version Compliant Modules for SIM Version
Enabler IIG / IIIG – depending on firmware version
EnforaG24Motorola
Late firmware versions from the last yearTelitFastrack familyWaveComMC35, MC39, MC55/56, MC75, TC65, TC63Cinterion (Siemens)
Tested modulesTested modulesVendor Vendor
