side entry ball valves - tecnovalve
TRANSCRIPT
A Long Experience in Energy Equipment and one Goal:
S ide Entr yBal l ValvesType 54 & 55
The Customer ’s sa t i s fac t ion .
VALVITALIA is an Italian Group of valves and other energy equipment manufacturers created to provide to the customers complete packages of products and services.Italy historically has been the Country with the largest number of valves and other energy equipment manufacturers. Also, Italy hasprovided to the oil & gas companies excellent engineering services. Experienced management, quality, performance, availability of large inventory and full dedication to the customer’s satisfaction differentiate VALVITALIA from the competition.VALVITALIA can provide discrete products and/or complete packages, including actuators, gear operators, pre-assembled skidsfor gas regulating e metering stations.Among the pre and post salesservices, VALVITALIA offers the refurbishment of any type of valve.The availability of stocks represents an additional service to the customers, very difficult to find elsewhere.
2
VALVITALIA PAVIA PLANT
Offer the best product at a competitive price and to respect agreed delivery times is our commitment.
VALVITALIA reserves the right to change design, specification and materials without notice
TYPE 54 TYPE 55 TYPE 54 TYPE 55
STANDARD FEATURES Type 54 Type 55 COMMENTS
Type 54
Type 55
3
TECHNICAL FEATURES
Trunnion mounted ball valve
When the ball is in fully closed position, two trunnions absorb the side thrust generated by line pressures, preventing excess friction between ball and seats. With this system, even at full rated working pressure, operating torque stays low. Therefore a generous sizing of trunnions is essential to the life and operability of the valve.The spherical surface is machined and ground to close tolerance. To reduce torque and minimize wear, the ball is then electrolessnickel plated and polished to mirror finish. For special applications the ball may be hardfaced with T.C.C. (Tungsten carbidecoating) to improve resistance to wear and prevent scratching caused by hard particles.
TYPE 54 TYPE 55
Size range 1 1/2” FB up 6” FB up Special sizes available to 6” RB to 60” on request
PressureANSI 150÷2500 1ANSI 150÷2500
e API 6A e API 6AThree piece split body YES YESAnti-static device YES YESSelf relieving seats YES NO 55-option (no extra cost)Double Piston Effect seats NO YES 54-option (no extra cost)Lubricated stem YES YESLubricated seat NO YES 54-option(*)Double block and bleed YES YESMetal to metal seats YES (*) YES (*)Trunnion mounted ball YES YESFull or Reduced bore YES YESBi-directional YES YESMinimum thickness ASME B16.34 YES YESRF or RTJ flanges to ASME B16.5 YES YES Other flange design(*)BW (butt-weld) ends to ASME B16.25 YES YES Other code for BW design(*)Bore and end-to-end YES YES Dimensions other than API 6D(*)Manufacture in accordance
YES YESASME B 16.34 design
with API spec. 6D available on request(*)Materials certification to EN10204
Type 3.1.C materials type 3.1.B for pressure containing YES YES
certification level (*)parts, ball, stem and seatsFire safe design to
YES YESOther fire safe code
API 6FA (BS 6755 Pt. 2) (e.g. API 607)(*)Bolting ASME VIII div. I YES YES ASME 16.34 available (*)Operation by lever, gear w/
YES YEShandwheel or actuator
Ease of main0tenanceType 54/55 design requires valve removal from line in order to perform maintenance.
(*) available with extra cost
VALVITALIA reserves the right to change design, specification and materials without notice
4
TECHNICAL FEATURESEmergency stem and seat sealant injectionIn case of emergency, when sealing materials (seat sealing and stem o-ring) are damaged or decom-posed by fire or other accidental causes, a sealant injection into fittings on both stem and seat preventsleakage until the primary seal is restored. For Type 54 ball valve the seat sealant injection is an optional feature available with an extra cost.. However, the material between ball and seat is athermoplastic, thus no further injection is necessary. Self lubricated, low friction materials is used forstem bearings, stem seals and body seats. Low friction materials, e.g. nylon, are used for seat inserts. Stem bearings and self-lubricating seals give predictable operating torque for the life of the valve.
StemThe stem is made separately from the ball. It is blow-out proof, property obtained with an integral collar in the bottom of the stem.
Stem SealSealing system can be defined triple: two static o-rings seal the stem, plus a third graphite retained bythe adaptor flange. This ultimate seal can be replaced when the valve is in line and in closed position.
Fire safe design and testFire safe is standard design of all Valvitalia ball valve. Two o-ring and gland gasket prevent leakpaths from the valve stem area, o-ring and body gasketprevent leakage through the valve body. If fire deteriorate o-ring, gland gasket, body gasket andthe stem firesafe packing prevent fluid or gas leakage.Valvitalia soft seat ball valve fire safe test(shown in the image) was witnessed and certified according to API 607 - API 6 FA - BS 6755 pt.2.
Anti-static deviceThis device is a standard feature of VALVITALIA ball valves. A coil spring thrusts a little sphere,providing earthed continuity between stem and other metallic components of valve (ball andbody) in order to avoid sparks during tuning of the stem for opening and closing the valve andprevent problems in case of use with flammable fluids and gas.
Seat designType 54 ball valve: plastic polymer insert for seat sealing, spring energised.Type 55 ball valve: primary metal-to-metal seal and secondary synthetic o-ring seal, spring energised.
Body designVALVITALIA trunnion mounted valves have a compact and streamlined body for maximum strength andminimum weight. Uniform fine grain and structure and toughness is assured by forged steel.
Type 54
Type 55
Double barrier on body jointsVALVITALIA valve design assures double barriers for all leakpaths. In this way, when one fails, theother seals.
VALVITALIA reserves the right to change design, specification and materials without notice
5
TECHNICAL FEATURES
Body vent and drainThe drain and vent plug of the valve body enable to check the integrity of the seat ring. A bleed valve may replace the drain plug.
Double block and bleedVALVITALIA design of a valve with two seating surfaces between which the cavity can be vented trough a bleed connection andthus confirm the tightness of the valve, as well in closed position as open position, when pressure is applied to any side or bothsides of the valve.
Double piston effect (55-standard, 54-option)With the DPE seat configuration when there is a leakage in the upstream seat, the pressure entering into the body cavity pushesthe downstream seat against the ball and the valve seals. This effect is a sealing principle involved in utilising line pressure to effect a seal across the floating seat.
First barrier Second barrier
A relief valve is recommended to be installed to protect the body cavity from excess pressure.
First barrier Second barrier
Self relieving seatIn self relieving condition, excessive internal body pressure is automatically relieved both in upstream and downstream line by forcing the seats away from the closure element.
VALVITALIA reserves the right to change design, specification and materials without notice
6
STOP COLLARBEARING HOUSINGTRUNNION O-RINGTRUNNION BEARINGSTEM PINSTEM BEARINGLOWER TRUNNION CAPSCREWLOWER TRUNNIONLOWER TRUNNION F.S. SEALRELIEF VALVERETAINING RINGBODY O-RING STEM GREASE FITTINGDRAIN PLUGSEAT SPRINGSEAT RING WITH INSERTUPPER THRUST WASHERADAPTER PLATESTEM F.S. SEALTOP COVER F.S. SEALCLOSURE F.S. SEALTOP COVER O-RINGSEAT GASKET O-RINGSTEM O-RINGBEARING HOUSING CAPSCREWADAPTER PLATE CAPSCREWTOP COVER CAPSCREWBODY STUD NUTBODY STUDGLAND BUSHINGTOP COVERSTEMBALLCLOSUREBODY
Fe 360A-105VITONDRY BEARING42CrMo4DRY BEARINGA-193-B7A-350-LF2GRAPHITEA-182-F316A-350-LF2VITONAISI 101842CrMo418-8A-350-LF2 + PTFE CCGDRY BEARINGFe 410GRAPHITEGRAPHITEGRAPHITEVITONVITONVITONA-193-B7A-193-B7A-193-B7A-194-2HA-193-B7AISI 1018A-350-LF242CrMo4 (AISI 4140)A-350-LF2A-350-LF2A-350-LF2
33
1
1
1-2
4
34
1
11
61605958575352515045473930282725b222019181615141210a10987654321
Pos. Description Material Notes
STEM PINU-CUP PACKINGRELIEF VALVECHECK VALVEPULLER BUSHINGPULLER CAPSCREWSEAT GREASE FITTINGBODY O-RING ANCHOR PINBEARINGBEARING RETAINERGREASE FITTINGVENT PLUGDRAIN PLUGSEAT SPRINGINNER SEAT RINGOUTER SEAT RINGLOWER THRUST WASHERUPPER THRUST WASHERSTEM KEYADAPTER PLATETOP COVER O-RINGSEAT GASKET O-RINGSEAL O-RINGSTEM O-RINGADAPTER PLATE CAPSCREWTOP COVER CAPSCREWBODY STUD NUTBODY STUDGLAND BUSHINGTOP COVERSTEMBALLCLOSUREBODY
42CrMo4 (AISI 4140)VITONA-182-F316AISI 1018AISI 10188-8 (SAE 1034)AISI 1018VITONC25 (AISI 1025)DRY BEARINGFe 510AISI 101842CrMo4 (AISI 4140)42CrMo4 (AISI 4140)18-8A-350-LF2A-350-LF2Fe 360 + P.P.S.Fe 360 + P.P.S.42CrMo4 (AISI 4140)Fe 410 (A-283)VITONVITONVITONVITON8-8 (SAE 1034)8-8 (SAE 1034)A-194-2HA-193-B7AISI 1018A-350-LF2C40 (AISI 1040)A-350-LF2A-350-LF2A-350-LF2
11
20
1
1-211-24
5748454443424139363332302928272625232221201514131210987654321
Pos. Description Material Notes
NOTES: 1) ELECTROLESS NICKEL PLATED 0.001" THICKNESS. - 20) NYLON FOR CLASS 1500.21) 42CrMo4 (AISI 4140) AS ALTERNATIVE - 24) A-694-F65 AS ALTERNATIVE
SERVICE: STANDARD FLUID - CARBON STEEL TRIM - FIRE SAFE DESIGNTEMPERATURE: -7OC +160OC - (-7O +121O FOR CLASS 900-1500)
STD. MATERIAL SELECTIONType 54
Type 55
NOTES: 1) ELECTROLESS NICKEL PLATED 0.001" THICKNESS.2) NYLON INSERT ON CLASS 900/1500 3) FOR LEVER OPERATED VALVES4) FOR GEAR OR ACTUATOR OPERATED VALVES
SERVICE: STANDARD FLUID - CARBON STEEL TRIM - FIRE SAFE DESIGNTEMPERATURE: -7OC +160OC - (-7O +121O FOR CLASS 900-1500)
VALVITALIA reserves the right to change design, specification and materials without notice
7
STD. MATERIAL SELECTION
150-1500-29O + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2
ASTM A350 Gr.LF2 + ENP ASTM A350 Gr.LF2 + ENP
AISI 4140 + ENPB7 / 2HPTFE VITON
INCONEL X 750
2500-29O / + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2AISI 4140 + ENP
ASTM A350 Gr.LF2 + ENPAISI 4140 + ENP
B7 / 2HNYLONVITON
INCONEL X 750
150-1500-29O + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2
ASTM A350 Gr.LF2 + ENPASTM A350 Gr.LF2 + ENP
AISI 1040 + ENPB7 / 2HVITONVITON
INCONEL X 750
2500-29O / + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A-694-F65 + ENP
ASTM A350 Gr.LF2 + ENPAISI 4140 + ENP
B7 / 2HNYLONVITON
INCONEL X 750
AA
RatingTemperatureBodyClosureBallSeatStemBoltingSeat gasketOther sealsSeat spring
54 55
Trim materials for general service (sweet fluids) FULL CARBON STEEL
150-1500-29O + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A 182 F316 + ENPA 182 F316 + ENPA 182 F316 + ENP
B7 / 2HPTFEVITON
INCONEL X 750
2500-29O / + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2
A 182 F316 LN + ENPA 182 F316 LN + ENP
17-4-PH + ENPB7 / 2HNYLONVITON
INCONEL X 750
150-1500-29O + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A 182 F316 + ENPA 182 F316 + ENP17-4-PH + ENP
B7 / 2HVITONVITON
INCONEL X 750
2500-29O / + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A-694-F65 + ENP
ASTM A350 Gr.LF2 + ENPAISI 4140 + ENP
B7 / 2HNYLONVITON
INCONEL X 750
CC
RatingTemperatureBodyClosureBallSeatStemBoltingSeat gasketOther sealsSeat spring
54 55
Trim materials for corrosive services (comply to NACE MR 01-75) STAINLESS STEEL TRIM
150-1500-29O + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A 182 F6 + ENPA 182 F6 + ENPA 182 F6 + ENP
B7 / 2HPTFEVITON
INCONEL X 750
2500-29O / + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A 182 F6 + ENPA 182 F6 + ENP
A 182 F6NM + ENPB7 / 2HNYLONVITON
INCONEL X 750
150-1500-29O + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A 182 F6 + ENPA 182 F6 + ENPA 182 F6 + ENP
B7 / 2HVITONVITON
INCONEL X 750
2500-29O / + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A 182 F6 + ENPA 182 F6 + ENPA 182 F6 + ENP
B7 / 2HNYLONVITON
INCONEL X 750
DD
RatingTemperatureBodyClosureBallSeatStemBoltingSeat gasketOther sealsSeat spring
54 55
Trim materials for highly corrosive services 13% Cr. STAINLESS STEEL TRIM
150-1500-29O + 180OC A 182 F316A 182 F316
A 182 F316 + ENPA 182 F316 + ENPA 182 F316 + ENP
B7 / 2HPTFEVITON
INCONEL X 750
2500-29O / + 180OCA 182 F316A 182 F316
A 182 F316LN + ENPA 182 F316LN + ENP
17-4-PH + ENPB7 / 2HNYLONVITON
INCONEL X 750
150-1500-29O + 180OCA 182 F316A 182 F316
A 182 F316 + ENPA 182 F316 + ENP17-4-PH + ENP
B7 / 2HVITONVITON
INCONEL X 750
2500-29O / + 180OCA 182 F316A 182 F316
A 182 F316LN + ENPA 182 F316LN + ENP
17-4-PH + ENPB7 / 2HNYLONVITON
INCONEL X 750
EE
RatingTemperatureBodyClosureBallSeatStemBoltingSeat gasketOther sealsSeat spring
54 55
Trim materials for corrosive services (comply to NACE MR 01-75) FULL STAINLESS STEEL VALVE
VALVITALIA reserves the right to change design, specification and materials without notice
8
STD. MATERIAL SELECTION
150-1500-29O + 180OC A 182 F51A 182 F51A 182 F51 A 182 F51
A 182 F51 + ENPB7 / 2H PTFEVITON
INCONEL X 750
2500-29O / + 180OCA 182 F51A 182 F51A 182 F51 A 182 F51
A 182 F51 + ENPB7 / 2H NYLONVITON
INCONEL X 750
150-1500-29O + 180OC A 182 F51A 182 F51
A 182 F51 + ENPA 182 F51 + ENPA 182 F51+ ENP
B7 / 2H VITON VITON
INCONEL X 750
2500-29O / + 180OCA 182 F51A 182 F51A 182 F51 A 182 F51
A 182 F51 + ENPB7 / 2H NYLONVITON
INCONEL X 750
FF
RatingTemperatureBodyClosureBallSeatStemBoltingSeat gasketOther sealsSeat spring
54 55
Trim materials for corrosive services (comply to NACE MR 01-75) FULL DUPLEX STEEL VALVE
150-1500-49O+180OC A 182 F316A 182 F316
A 182 F316 + ENPA 182 F316 + ENPA 182 F316 + ENP
L7 / Gr.7 PTFE
PTFE + ELGILOYINCONEL X 750
2500-49O /+180OC A 182 F316A 182 F316
A 182 F316LN + ENPA 182 F316LN + ENP
17-4-PH + ENPL7 / Gr.7 NYLON
PTFE + ELGILOYINCONEL X 750
150-1500-49O+180OC A 182 F316A 182 F316
A 182 F316 + ENPA 182 F316 + ENP17-4-PH + ENPL7 / Gr.7 VITON
PTFE + ELGILOYINCONEL X 750
2500-49O /+180OCA 182 F316A 182 F316
A 182 F316LN + ENPA 182 F316LN + ENP
17-4-PH + ENPL7 / Gr.7 NYLON
PTFE + ELGILOYINCONEL X 750
GG
RatingTemperatureBodyClosureBallSeatStemBoltingSeat gasketOther sealsSeat spring
54 55
Trim materials for low temperature with stem extension FULL STAINLESS STEEL VALVE
150-1500-196O +120OC A 182 F316A 182 F316
A 182 F316 + ENP A 182 F316 + ENPXM 19 + ENP(A 453 Gr.660
KEL-FPTFE + ELGILOYINCONEL X 750
2500-196O / +120OCA 182 F316A 182 F316
A 182 F316LN + ENPA 182 F316LN + ENPINCONEL 718 + ENP
A 453 Gr.660 KEL-F
PTFE + ELGILOYINCONEL X 750
150-1500-196O +120OCA 182 F316A 182 F316
A 182 F316 + ENPA 182 F316 + ENPXM 19 + ENPA 453 Gr.660
KEL-FPTFE + ELGILOYINCONEL X 750
2500-196O / +120OCA 182 F316A 182 F316
A 182 F316LN + ENPA 182 F316LN + ENP
XM 19 + ENPA 453 Gr.660
KEL-FPTFE + ELGILOYINCONEL X 750
LL
RatingTemperatureBodyClosureBallSeatStemBoltingSeat gasketOther sealsSeat spring
54 55
Trim materials for cryogenic temperature with stem extension FULL STAINLESS STEEL VALVE
150-1500-29O + 250OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2
ASTM A350 Gr.LF2 + TCC ASTM A350 Gr.LF2 + TCC
17-4-PH + ENPB7 / 2H
METAL TO METALPTFE + ELGILOYINCONEL X 750
2500-29O / + 250OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2
ASTM A350 Gr.LF2 + TCC ASTM A350 Gr.LF2 + TCCINCONEL 718 + ENP
B7 / 2H METAL TO METALPTFE + ELGILOYINCONEL X 750
150-1500-29O + 250OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2
ASTM A350 Gr.LF2 + TCC ASTM A350 Gr.LF2 + TCC
17-4-PH + ENPB7 / 2H
METAL TO METALPTFE + ELGILOYINCONEL X 750
2500-29O / + 250OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2
ASTM A350 Gr.LF2 + TCC ASTM A350 Gr.LF2 + TCCINCONEL 718 + ENP
B7 / 2H METAL TO METALPTFE + ELGILOYINCONEL X 750
MM
RatingTemperatureBodyClosureBallSeatStemBoltingSeat gasketOther sealsSeat spring
54 55
Trim materials for high temperature
Alternative material selections available upon request.
VALVITALIA reserves the right to change design, specification and materials without notice
9
383851517676102102
191216216283283305305457
165178178203203229229394
178191191216216241241406
100100105105130130155155
110110120120145145170170
120120120120120120135135
2727272727272727
125125125125125125125125
130130145145200200200200
270270320320420420520520
33333333
1012152235375267
1215202540446370
SIZE
inches
DN FACE TO FACE G H L M K S X BARE STEMVALVE WEIGHT
LEVER
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
CLASS 150 full bore valves are supplied with compact design
1.5”2”x1.5”x2”
2”3”x2”x3”
3”4”x3”x4”
4”6”x4”x6”
ANSI CLASS 150 (PN 20)Working Pressure 275 Psi (19 bar) - Hydrostatic Shell Test 420 Psi (29 bar)
TYPE54
383851517676102102
191216216283283305305457
191216216283283305305404
203203232298298321321419
100100105105130130155155
110110120120145145170170
120120120120120120120120
2727272727272727
125125125125125125125125
130130145145200200240240
270270370370570570660660
33333333
1012152238395673
1618213251547599
SIZE
inches
DN FACE TO FACE G H L M K S X BARE STEMVALVE WEIGHT
LEVER
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
1.5”2”x1.5”x2”
2”3”x2”x3”
3”4”x3”x4”
4”6”x4”x6”
ANSI CLASS 300 (PN 50)Working Pressure 720 Psi (50 bar) - Hydrostatic Shell Test 1080 Psi (75 bar)
TYPE54
383851517676102102
241292292356356406406495
241292292356356406406495
241295295359359410410498
100100105105130130155155
110110120120145145170170
120120120120120120135135
2727272727273535
125125125125125125125125
130130145145200200240240
270270370370570570660660
33333355
1214172440457780
19222535556385125
SIZE
inches
DN FACE TO FACE G H L M K S X BARE STEMVALVE WEIGHT
LEVER
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
1.5”2”x1.5”x2”
2”3”x2”x3”
3”4”x3”x4”
4”6”x4”x6”
ANSI CLASS 400 (PN 64)Working Pressure 960 Psi (66 bar) - Hydrostatic Shell Test 1440 Psi (100 bar)
TYPE54
BALL VALVES TYPE 54 (Overall Dimensions)
383851517676102102
241292292356356432432559
241292292356356432432559
241295295359359435435562
100100105105130130155155
110110120120145145170170
120120120120120120135135
2727272727273535
125125125125125125125125
130130145145200200240240
300300430430670670760760
33333355
1214182542507285
192226375774101150
SIZE
inches
DN FACE TO FACE G H L M K S X BARE STEMVALVE WEIGHT
LEVER
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
1.5”2”x1.5”x2”
2”3”x2”x3”
3”4”x3”x4”
4”6”x4”x6”
ANSI CLASS 600 (PN 100)Working Pressure 1440 Psi (99 bar) - Hydrostatic Shell Test 2160 Psi (149 bar)
TYPE54
VALVITALIA reserves the right to change design, specification and materials without notice
10
BALL VALVES TYPE 54 (Overall Dimensions)
383851517676102102
305369369381381457457610
305369369381381457457610
305372372384384460460613
100100115115145145175175
115115125125155155195195
120120120120135135168168
2727272735354242
125125125125125125250250
130130160160210210260260
400400600600900900--
33335599
202234486970145147
3143586483107162207
SIZE
inches
DN FACE TO FACE G H L M K S X BARE STEMVALVE WEIGHT
LEVER
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
1.5”2”x1.5”x2”
2”3”x2”x3”
3”4”x3”x4”
4”6”x4”x6”
ANSI CLASS 900 (PN 150)Working Pressure 2160 Psi (149 bar) - Hydrostatic Shell Test 3240 Psi (223 bar)
TYPE54
383851517676102102
305369369470470546546705
305369369470470546546705
305372372473473549549711
100100115115145145175175
115115125125155155195195
120120120120135135168168
2727272735354242
125125125125125125250250
130130160160210210260260
400400600600900900--
33335599
202234486972146151
3143587597129166270
SIZE
inches
DN FACE TO FACE G H L M K S X BARE STEMVALVE WEIGHT
LEVER
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
1.5”2”x1.5”x2”
2”3”x2”x3”
3”4”x3”x4”
4”6”x4”x6”
ANSI CLASS 1500 (PN 250)Working Pressure 3600 Psi (248 bar) - Hydrostatic Shell Test 5400 Psi (372 bar)
TYPE54
3232444464648989133133
3844514515785786736739149141022
3844514515785786736739149141022
3874544545845846836839279271038
100100110110140140250250290290
140140160160185185200200235235
120120135135168168185185250250
27273535424250505050
125125125125250250300300500500
204235235305305356370483483553
33559915152828
40447098162168322332675860
6286118152218282362570750990
SIZE
inches
DN FACE TO FACE G H L M K S BARE STEMVALVE WEIGHT
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
1.5”2”x1.5”x2”
2”3”x2”x3”
3”4”x3”x4”
4”6”x4”x6”
6”8”x6”x8”
ANSI CLASS 2500 (PN 420)Working Pressure 6000 Psi (420 bar) - Hydrostatic Shell Test 9000 Psi (630 bar)
TYPE54
Type 54 Class 2500 ANSI
VALVITALIA reserves the right to change design, specification and materials without notice
11
BALL VALVES TYPE 55 (Overall Dimensions)
15215220320325425430530533738738743848948954059159163568673773778183287697810221118116813841461
4575215215595596356358387628389919149911143®
114313971245134613971727152416261727®
®
®
®
®
®
3944574575335336106107626867629148649141067®
106712951143124512951524137214731524®
®
®
®
®
®
4064704705465466226227756997759278769271080®
1080®
®
®
®
®
®
®
®
®
®
®
®
®
®
305305340340380380420420470510510545590590635670670720755805805845875910100010351135118013401435
2152152552552952953453453754154154604954955405755756256607007007407858259059701080113012801400
135135168168185185185185250250250275310310310355355415415415415415415500500500500500518518
35354242505050505050505066666665658686757575759696969696118118
125125250250300300300300500500500500600600600600600600600600600600600600600600600600700700
30540040046546555055067558567583576083599092099012351060114012351445129513601445162517151895197022852450
55991515151528282842676767104104170170178178178178273273273273273710710
16518528530536538559570569689610011342175218322165301835483568427852685958593064008200947011200
®
®
®
®
17519531032539541563574574694610961422183219122235359836383648437853786058605066008400997011800
®
®
®
®
SIZE
inches
DN FACE TO FACE G H L M K S BARE STEMVALVE WEIGHT
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
6”8”X6”X8”
8”10”X8”X10”
10”12”X10”X12”
12”16”X12”X16”
14”16”
20”X16”X20”18”20”
24”X20”X24”22”24”
30”X24”X30”26”28”30”
36”X30”X36”32”34”36”40”42”46”48”56”60”
ANSI CLASS 150 (PN 20)Working Pressure 275 Psi (19 bar) - Hydrostatic Shell Test 420 Psi (29 bar)
TYPE55
15215220320325425430530533738738743848948954059159163568673773778183287697810221118116813841461
4574575215215595596356357628388389149919911092114311431245134613971397152416261727®
®
®
®
®
®
4034035025025685686486487628388389149919911092114311431245134613971397152416261727®
®
®
®
®
®
419419518518584584664664778854854930101010101114116511651270137214221422155316541756®
®
®
®
®
®
305305340340380380420420470510510545590590635670670720755805805845875910100010351135118013401435
2152152552552952953453453754154154604304305405755756256607007007407858259059701080113012801400
168168185185250250250250250275275310355355415415415415415500500500500500500500500500518518
4242505050505050505050666565868686757596969696969696118118118118
250250300300500500500500500500500600600600600600600600600600600600600600600600700700700700
3184054054704705555556805956808457708451000930100012501070115012501460131013701460164017301915199023052475
9915152828282828424267104104170170170178178273273273273273273273710710710710
18519532534547550560671681293711921430195822482548305839484050490057006000668073507550936011090
®
®
®
®
1952053353654955456468069021172139216202208244827983508419844505250605063507020770080101059012545
®
®
®
®
SIZE
inches
DN FACE TO FACE G H L M K S BARE STEMVALVE WEIGHT
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
6”8”X6”X8”
8”10”X8”X10”
10”12”X10”X12”
12”16”X12”X16”
14”16”
20”X16”X20”18”20”
24”X20”X24”22”24”
30”X24”X30”26”28”30”
36”X30”X36”32”34”36”40”42”46”48”56”60”
ANSI CLASS 300 (PN 50)Working Pressure 720 Psi (50 bar) - Hydrostatic Shell Test 1080 Psi (75bar)
TYPE55
® To be confirmed after P/O placement.
® To be confirmed after P/O placement.
VALVITALIA reserves the right to change design, specification and materials without notice
6”8”X6”X8”
8”10”X8”X10”
10”12”X10”X12”
12”16”X12”X16”
14”16”
20”X16”X20”18”20”
24”X20”X24”22”24”
30”X24”X30”26”28”30”
36”X30”X36”32”34”36”40”42”46”48”56”60”
15215220320325425430530533738738743848948954059159163568673773778183287697810221118116813841461
55966066078778783883899188999111941092119413971295139716511448154916512083177819302083®
®
®
®
®
®
55966066078778783883899188999111941092119413971295139716511448154916512083177819302083®
®
®
®
®
®
56266466479179184184199489299412001095120014071305140716641461156216642099179419462099®
®
®
®
®
®
310310350350390390430430480525525565605605650690690740775830830870900940103010701170121513801475
2152152552552952953453453754154154604954955405755756256607007007407858259059701080113012801400
168168250250250250275275310355355415415415415415415500500500500500500518518518518518660660
4242505050505050666565868686757575969696969696118118118118118150150
250250500500600600600600600600600600600600600600600600600600600600600700700700700700700700
3564204205085085655656956056958607858601020950102012751095117512751490133514001490167517651950203023552525
992828282842425710410417017017017817817827327327327327327371071071071071011601160
19024038539543149671999692211802380171824682798276036504200419049905740794085909590®
®
®
®
®
®
®
24529045548557166686711461092145025602548264830483070400049505090619069909090994010790
®
®
®
®
®
®
®
SIZE
inches
DN FACE TO FACE G H L M K S BARE STEMVALVE WEIGHT
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
ANSI CLASS 600 (PN 100)Working Pressure 1440 Psi (99 bar) - Hydrostatic Shell Test 2160 Psi (149 bar)
TYPE55
12
BALL VALVES TYPE 55 (Overall Dimensions)
15315320420425425430530533738838843948948954059159163568673773778283287797810231118116913841461
4965975976746747627629028269021055978105512321143123215241309139715241880165117781880®
®
®
®
®
®
4965975976746747627629028269021055978105512321143123215241309139715241880165117781880®
®
®
®
®
®
4996016016776777667669058299051061982106112421153124215371321141015371896166717941896®
®
®
®
®
®
310310350350390390430430475520520560600600645685685735770825825865895930102010551160120513701460
2152152552552952953453453754154154604954955405755756256607007007407858259059701080113012801400
168168185185250250250250275310310355415415415415415415500500500500500500518518518518518660
424250505050505050666665868686868675969696969696118118118118118150
250250300300500500500500500600600600600600600600600600600600600600600600700700700700700700
3184104104754755605606856006858557808551010940101012601085116012601475132513851475165517501935201023302500
991515282828283067671041701701701701701782732732732732732737107107107107101160
180235295260480605685946902109714621485190523142587285938504200500057126462651167277590®
®
®
®
®
®
2102603404505707007761037997127716421723222326322894324641004550540063717053695476598545®
®
®
®
®
®
SIZE
inches
DN FACE TO FACE G H L M K S BARE STEMVALVE WEIGHT
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
6”8”X6”X8”
8”10”X8”X10”
10”12”X10”X12”
12”16”X12”X16”
14”16”
20”X16”X20”18”20”
24”X20”X24”22”24”
30”X24”X30”26”28”30”
36”X30”X36”32”34”36”40”42”46”48”56”60”
ANSI CLASS 400 (PN 64)Working Pressure 960 Psi (66 bar) - Hydrostatic Shell Test 1440 Psi (100 bar)
TYPE55
® To be confirmed after P/O placement.
® To be confirmed after P/O placement.
VALVITALIA reserves the right to change design, specification and materials without notice
13
BALL VALVES TYPE 55 (Overall Dimensions)
152152203203254254305305324375375425473473524572572619667714714762810857956100611021149
6107377378388389659651130102911301321121913211549®
1549®
®
®
®
®
®
®
®
®
®
®
®
6107377378388389659651130102911301321121913211549®
1549®
®
®
®
®
®
®
®
®
®
®
®
6137407408418419689681140103811401334123213341568®
1568®
®
®
®
®
®
®
®
®
®
®
®
25025029029034534539039045050050055059559565570070076081083583591096010201120120012801330
245245275275320320365365390430430490530530560620620670710755755815850885970106011101150
185185250250275275310310355415415415415415500500500500500518518518518518518518660660
50505050505066666586868675759696969696118118118118118118118150150
300300500500500500600600600600600600600600600600600600600700700700700700700700700700
381470470547547610610770680770920850920111010301110136012001290136016351460155016351810190020702160
151528284242575710417017017017817827327327327327371071071071071071071011601160
2352803514517428679921252114414381703206324352855300037454370543074059570®
®
®
®
®
®
®
®
3254054765468921042114214221489185824232653316042004000509061806750873010990
®
®
®
®
®
®
®
®
SIZE
inches
DN FACE TO FACE G H L M K S BARE STEMVALVE WEIGHT
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
6”8”X6”X8”
8”10”X8”X10”
10”12”X10”X12”
12”16”X12”X16”
14”16”
20”X16”X20”18”20”
24”X20”X24”22”24”
30”X24”X30”26”28”30”
36”X30”X36”32”34”36”40”42”46”48”
ANSI CLASS 900 (PN 150)Working Pressure 2160 Psi (149 bar) - Hydrostatic Shell Test 3240 Psi (223 bar)
TYPE55
® To be confirmed after P/O placement.
VALVITALIA reserves the right to change design, specification and materials without notice
14
BALL VALVES TYPE 55 (Overall Dimensions)
181225267311352397438
10221270142215751683®
®
®
10381292144515971702®
®
®
71184184110001000114611461407
385435500580670740825950
3954655256307208109001020
310355415415641641641912
66658675969696118
600600600600600600600700
6607908709901100121513251325
67104170178273273273710
1660249034504260514072009720®
19702990413050906160863011640
®
SIZE
inches
DN FACE TO FACE G H L M K S BARE STEMVALVE WEIGHT
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
8”10”12”14”16”18”20”24”
ANSI CLASS 2500 (PN 420)Working Pressure 6000 Psi (420 bar) - Hydrostatic Shell Test 9000 Psi (630 bar)
TYPE55
146146194194241241289289318362362407451451502534534597641686686730775819
705832832991991113011301384125713841664153716641943®
1943®
®
®
®
®
®
®
®
705832832991991113011301384125713841664153716641943®
1943®
®
®
®
®
®
®
®
71184184110001000114611461407127614071686155916861971®
1971®
®
®
®
®
®
®
®
320320375375445445500500580640640705760760840895895975104010701070116512301310
28028033033039539542542550056056059072572577081581590594510351035106011401180
250250250250310310355355355415415415500500500500500518518518518518518518
5050505066666565658686759696969696118118118118118118118
500500500500600600600600600600600600600600600600600700700700700700700700
43054054065565577077099068099011801090118014251320142514801530165017301800187019852100
282828285757104104104170170178273273273273273710710710710710710710
37640643748773779210891144233835584248480072509200®
®
®
®
®
®
®
®
®
®
46659667283710921232153520533071449855486000850010400
®
®
®
®
®
®
®
®
®
®
SIZE
inches
DN FACE TO FACE G H L M K S BARE STEMVALVE WEIGHT
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
6”8”X6”X8”
8”10”X8”X10”
10”12”X10”X12”
12”16”X12”X16”
14”16”
20”X16”X20”18”20”
24”X20”X24”22”24”
30”X24”X30”26”28”30”
36”X30”X36”32”34”36”
ANSI CLASS 1500 (PN 250)Working Pressure 3600 Psi (248 bar) - Hydrostatic Shell Test 5400 Psi (372 bar)
TYPE55
® To be confirmed after P/O placement.
® To be confirmed after P/O placement.
VALVITALIA reserves the right to change design, specification and materials without notice
Underground Installation• Stem extension can be required for VALVITALIA
ball valve. • This feature permits use of valves in remote area, e.g.
for underground installation. • VALVITALIA can provide any kind of stem extension,
with piping and fittings suitable to raise the body drain, the body vent and the emergency sealant injection fittings up the stand floor.
Subsea service• Special materials and protective overlays
for extended life of service.• Reliable product in order to provide long lasting service
without maintenance.• Additional sea water gaskets protect stem and external
sealing areas.• Special protective coatings and special sealing
caps protect body and bonnet bolts.
SPECIAL APPLICATIONS
15
Cryogenic service• Use range up to minus 196 °C. • Assure the maneuverability at low temperature.• Materials and dimensions are specially
designed to suit low temperature.
Gas test facilities
VALVITALIA reserves the right to change design, specification and materials without notice
A Long Experience in Energy Equipment and one Goal:
The Cus tomer ’s sa t i s fac t ion .
04-1
0 - 1
000
- VLT
.SDE
.02
Rivanazzano (PV) Plant
VALVITALIA S.p.A.Via Tortona, 69 - 27055 Rivanazzano (PV) Italy
Phone: +39.0383.945911 - Fax: +39.0383.9459962E-mail: [email protected] site: www.valvitalia.com