short form catalog - versatis catalog.pdf · 2004-04-27 · 1 rev. 012104 825 dawson drive, suite...

1

Rev. 012104

825 Dawson Drive, Suite 1, Newark, DE 19713Phone 302-368-7824 Fax 302-368-7830

Email: [email protected] www.bwtek.com

SHORT FORM CATALOG

Lasers and Spectrometersfor all your application needs

2

Rev. 012104



Table of ContentsBWC-ASE WHITE LIGHT TEST SOURCE ................................................................................................. 4BWC-SLD BROADBAND TEST SOURCE ................................................................................................. 4BWA FIBER COUPLED HIGH POWER LASER DIODE ARRAY ............................................................... 5BWK - PIGTAILED HIGH POWER LASER DIODE.................................................................................... 5BWKM PIGTAILED LASER DIODE ............................................................................................................ 5BWC-M MULTICHANNEL LASER LIGHT SOURCE ................................................................................ 6BWC-CWDM MULTICHANNEL LASER TEST SOURCE ........................................................................ 6BWC-FL FIBER LASER AND RAMAN FIBER LASER .............................................................................. 7BWC-FL-OEM FIBER LASER AND RAMAN FIBER LASER MODULE .................................................. 7BWC-FLP PULSED FIBER LASER .............................................................................................................. 7BWC-EDFA-E BENCH TOP ERBIUM DOPED FIBER AMPLIFIER .......................................................... 8BTC112E TE COOLED LINEAR CCD SPECTROMETER(USB 2.0/1.1) .................................................... 9BTC110E TE COOLED LINEAR CCD SPECTROMETER (RS232) ............................................................ 9BTC110 OEM TE COOLED LINEAR CCD SPECTROMETER MODULE (RS232 OR USB) .................... 9BTC211E TE COOLED LINEAR INGAAS ARRAY SPECTROMETER (USB) ......................................... 10BTC31XE HIGH RESOLUTION TE COOLED LINEAR CCD SPECTROMETER ................................... 10BTC500E TE COOLED LINEAR PBS ARRAY SPECTROMETER (USB) ................................................ 10BRC711E FIBER COUPLED NIR ENHANCED PDA ARRAY SPECTROMETER.....................................11BRM-785 NARROW LINEWIDTH FIBER COUPLED LASER..................................................................11SYSTEM AND ACCESSORY OPTIONS ................................................................................................... 11BPS100 PHOTO INTENSITY FEEDBACK CONTROLLED TUNGSTEN LIGHT SOURCE .................. 12BDS100 UV/VIS AND NIR DEUTERIUM/ TUNGSTEN LIGHT SOURCE .............................................. 12BDS130 UV/VIS AND NIR DEUTERIUM/ TUNGSTEN LIGHT SOURCE .............................................. 12BCH100/BFH105 FIBER COUPLED CUVETTE/FILTER SAMPLE HOLDER ......................................... 13BRP FIBER REFLECTANCE PROBE ......................................................................................................... 13FPC SERIES FIBER PATCH CORD ........................................................................................................... 13BRP FIBER OPTIC RAMAN PROBE ......................................................................................................... 14BWB SERIES LOW NOISE VIOLET/BLUE LASER ................................................................................. 15BWN SERIES LOW NOISE GREEN/RED/YELLOW LASER ................................................................... 15BWR SERIES DIODE PUMPED SOLID STATE NIR LASER.................................................................... 15BWF2 HIGH POWER PORTABLE BENCH TOP FIBER COUPLED LASER SYSTEM........................... 16BWF3 HIGH POWER RACK MOUNT FIBER COUPLED DIODE LASER SYSTEM ............................. 16BWF5 MICROCOMPUTER AND TOUCH SCREEN CONTROLLED SYSTEM DIODE LASER .......... 16BWF-OEM COMPACT FIBER COUPLED DIODE LASER MODULE .................................................... 17BRM-785 NARROW LINEWIDTH FIBER COUPLED LASER ................................................................ 17BWDT-2A-OEM COMPACT DIODE LASER DRIVER BOARD .............................................................. 18BWDT-8-OEM MULTICHANNEL DIODE LASER DRIVER BOARD ...................................................... 18TERMS AND CONDITIONS .........................................................................................19PRICES AND QUOTATIONS ..................................................................................................................... 19

3

Rev. 012104



PURCHASE ORDERS AND PAYMENT METHODS ................................................................................ 19DELIVERY AND SHIPPING ....................................................................................................................... 19RETURNS AND CANCELLATION FEE .................................................................................................... 19INTERNATIONAL CUSTOMERS .............................................................................................................. 19WARRANTY TERMS AND CONDITIONS............................................................................................... 19WARRANTY RETURN PROCEDURE ....................................................................................................... 20SAFETY WARNINGS ................................................................................................................................. 20

4

Rev. 012304BROADBAND LIGHT SOURCES



BWC-ASE series are turnkey whitelight test sources. They produceamplified spontaneous emissionranging from 1520 to 1570nm, 1520to 1620nm, and 1700 to 2000nm withhigh spectral power density. Thewhite light sources are constructedby use of special EDFA fibers,resulting wavelength and powerstability.

Highlights·Covering C+L band: 1520-1620nm·Custom wavelength band 1700 -2000 nm·Highly stabilized optical outputpower·Compact and rugged design·Various fiber optic connectorstyles·Best performance/cost ratio

BWC-ASE White Light Test Source

BWC-SLD provides a stable sourceof light over bands of >hundreds ofnm @30dBm/nm. Available wave-lengths are from 670 - 1650 nm. Itcomes complete with a high preci-sion controller for high output levelsand stability of operations. Alsoavailable are high power (>50mW)and custom bandwidth versions.New SLD-1C is centered at 1310nmwith 90nm FWHM @5mW.

Highlights ·One source for broad or custombands·Highly stable optical output power·Available in 1, 2 or multiplechannel configurations·Various fiber optic connectoroptions

·Best performance to cost ratio

BWC-SLD Broadband Test Source

SLD9 Spectrum ASE4-GF Spectrum SLD1C Spectrum

5

Rev. 012304 FIBER PIGTAILED LASER DIODES



BWA series laser diode arraysoffer superior performance to cost.Rugged packaging, ultra-stable fiberattachment and a uniquely efficientfiber coupling design provide anintense low divergence and a circularsymmetric beam from the output endof the fiber pigtail. The package hasconvenient mounting plates andcustomer selectable fiber termina-tions.

Highlights ·Ultrahigh brightness

·Over 1.2mW cm—2sr-1

·14W @ 0.22 NA @ 100µµµµµm

·30W @ 0.4 NA @ 400µµµµµm

·810, 940 or 980nm

·Other custom wavelengths

·High Reliability·High Efficiency

BWA Fiber Coupled High Power Laser Diode Array

BWK-Pigtailed high power laserdiodes are ideal for thermal printing,military, aerospace and otherapplications that require highbrightness and long life. The BWK-980-2.5-pig (BWK-810-2.5-pig)provides 2.5W out of a 100um @0.22 NA Fiber, while the BWK-810-1.2-pig (BWK-980-1.2-pig) provides1.2W out of a 50um @ 0.22 NA fiber.Termination options include: barefiber, ST connector and SMA-905connector.

Highlights ·Up to 1.2W @ 0.22 NA @ 50um

·1.5W @ 0.12 NA @100um

·4.0W @ 0.22 NA @ 100um

·635 -1900nm in Wavelength

·50 or 100um Fiber

·High Reliability·High Efficiency

BWK - Pigtailed High Power Laser Diode

The fiber pigtailed BWKM serieslaser diodes come with pigtailed 14pin DIP package. They are hermeti-cally sealed and available for wave-lengths of 980, 1310, 1480, 1550 &1610nm, or at other customizedwavelengths between 650 and1700nm. BWKM modules provide anoutput power of greater than 1mWout of a Corning SMF-28 fiber.

Highlights ·Standard 14-Pin DIP Package·Single Mode Fiber Output·Center Wavelength Available 650 -1650nm·Laser Welded and HermeticallySealed·TE cooled with Monitoring PD·F-P Structure Multi-LongitudinalMode

BWKM Pigtailed Laser Diode

6

Rev. 012204MULTICHANNEL LASER SOURCES



BWC-CWDM multi-channel lasersource employs stabilized Fabry-Perot laser diodes. The standardconfiguration comes with eightCWDM wavelength channels in twounits, from 1470 to 1530nm (unit A)and 1550 to 1610nm (unit B). Itprovides highly stabilized opticaloutput power, external synchroniza-tion capability and internal modula-tion of 200Hz. Analog control portsare available for customized monitor-ing and control applications.

Highlights ·Available wavelengths of: 1470 -1610nm·Standard (<5nm) and narrow(<0.5nm) spectral linewidth ver-sions·Highly stable optical output power·Internal modulation of 200Hz·External sync. control option·Various fiber optic connectorstyles·Isolator and DFB LD optionsavailable

BWC-CWDM Multichannel Laser Test Source

BWC-M multichannel laser sourceemploys stabilized Fabry-Perot laserdiodes. Available wavelengths arefrom 960nm to 1650nm or custom.This product provides highly stableoptical output power, built-in 200Hzmodulation control and optionalexternal synchronization control.

The BWC-M can be configured forcustom number of channels.

Highlights·Available wavelengths of: 960-1650nm·Standard (<5nm) and narrow(<0.5nm) spectral linewidthversions·Highly stable optical output power·Built-in modulation of 200Hz·External sync. control option·Various fiber optic connectorstyles·Isolator and DFB LD optionsavailable

BWC-M Multichannel Laser Light Source

7

Rev. 012304 FIBER LASER/AMPLIFIER



BWC-FL is a compact, turnkeysystem. It provides up to 20W oflaser output in a standard SM fiber.The BWC-FL systems employ highbrightness double-clad fibers,pumped by high power laser diodemodules. High power outputs atlonger wavelengths are achieved byuse of additional high efficiencycascaded Raman resonatorsattached to the BWC-FL-1115.Standard and custom wavelengthsare available covering a wide range ofspectrum.

Highlights·Available wavelengths of 1064 to1500nm·Up to 20W output power·Standard single mode fiber pigtail·High conversion efficiency·High suppression ratio for sidemodes·Compact with forced air-cooling·Turn-key operation

BWC-FL Fiber Laser and Raman Fiber Laser

BWC-FL-OEM comes in Type I (TEcooled) and Type II (non-cooled)packages. Both are compactmodules designed for OEM applica-tions. Up to 20W laser output in astandard SM fiber can be achieved.The BWC-FL-OEM modules employhigh brightness double-clad fibers,pumped by high power laser diodemodules. High power outputs areavailable in the wavelength range of1064 - 1500nm.

Highlights ·Available wavelengths of 1064 to1500nm·Up to 20W output power·Standard single mode fiber pigtail·High conversion efficiency·High suppression ratio for sidemodes·Compact in size

BWC-FL-OEM Fiber Laser and Raman Fiber Laser Module

The BWC-FLP is a compact fiberlaser system which was initiallydeveloped for eye safe radar andrange finder applications. It is basedon EDFA and Raman optical ampli-fier technology. BWC-FLP cangenerate a high peak power of 60 -100W with tunable pulse width of upto 40ns and repetition rate of 0-10kHz.

Applications·Fiber Optic Testing

·Eye Safe Lidar

·Eye Safe Range Finder

·Metrology

·Printing

·Micro-material Processing

·Medical Imaging Research·Signal Transmission

BWC-FLP Pulsed Fiber Laser

8

Rev. 012304FIBER LASER/AMPLIFIER



The BWC-EDFA-E is aturnkey bench top amplifier/broad-band source, which operates over awide temperature range and exhibitsextremely low power dissipation.BWC-EDFA-E comes withmicrocontroller based alarm andcontrol option. Optimum performanceand system stability are supportedthrough the use of optical isolation atthe input and output.

Highlights

·Gain-flattened spectral responseoption·Dynamic gain equalization·Broad bandwidth·Low noise·Isolated input and output·Optical input and output tapsoption·Wide operating temperature range·Standard serial communicationinterface option·Low power consumption

BWC-EDFA-E Bench Top Erbium Doped Fiber Amplifier

9

Rev. 012304 SPECTROMETERS/ACCESSORIES



BTC110E spectrometers areequipped with 2048 elementsthermoelectricaly cooled (TEC) linearCCD arrays, optimized high through-put spectrographs, Windows basedoperating software and fiber coupledinput capability. The BTC110Espectrometers offer high S/N ratio,low dark counts and long termoperation stability, and are ideal forlow light level detections and longterm monitoring applications.Resolution of 0.3nm or better can besupplied.

Highlights ·16 bit digitizer with RS232 (orUSB adapter) interface·TE cooled high stability and lowdark counts·High signal/noise ratio > 1000·0.3 to 20nm resolution versionsavailable·Ideal for low light level applica-tions·Configurable in wavelength rangeof 200 -1100nm·1-16 multiplier integration

BTC110E TE Cooled Linear CCD Spectrometer (RS232)

BTC110-OEM are OEM CCDspectrometers equipped with 2048elements thermoelectricaly cooled(TEC) linear CCD arrays, optimizedhigh throughput spectrographs andfiber coupled input capability. TheBTC110-OEM spectrometers offerhigh S/N ratio, low dark counts andlong term operation stability, and areideal for low light level detectionsand long term monitoring applica-tions. Resolution of 0.3nm or bettercan be supplied.

Highlights

· TE cooled high stability and lowdark counts· High signal/noise ratio >1000· 0.3 to 20nm resolution versionsavailable· Ideal for low light level applica-tions· Custom configurations andapplication support ·Configurable in wavelength rangeof 200 -1100nm· 16 bit digitizer with RS232 orUSB 2.0

BTC110-OEM TE Cooled Linear CCD Spectrometer Module (RS232 or USB 2.0)

BTC112 are low cost and highperformance TE cooled linear CCDspectrometers with USB interface.They are equipped with 2048 ele-ments thermoelectric cooled (TEC)linear CCD arrays, built-in 16 bitdigitizers with high speed plug andplay USB 2.0/1.1 interfaces andoptimized high throughput spectro-graphs. BTC112 spectrometers areideal for low light level detection andlong term monitoring applications.Resolution of 0.3nm or better can besupplied.

Highlights ·OEM and end user versions·Wide wavelength ranges·TE cooled high stability and lowdark counts·Built-in 16 bit digitizer·0.3 to 20nm resolution·Plug and play high speed USB2.0/1.1 interface·Up to over 180 complete spectra/s transferring speed·5- 65535ms integration time·TCP/IP Interface available

BTC112E TE Cooled Linear CCD Spectrometer (USB 2.0/1.1)

10

Rev. 012304SPECTROMETERS/ACCESSORIES



BTC211E spectrometers areequipped with 512 elementsthermoelectricaly cooled (TEC) linearInGaAs arrays, optimized highthroughput spectrographs, Windowsbased operating software and fibercoupled input capability. TheBTC211E spectrometers offer high S/N ratio, low dark counts and longterm operation stability, and are idealfor low light level detections and longterm monitoring applications.Resolution of 0.7nm or better can besupplied.

Highlights

·16 bit digitizer with USB 2.0/1.1interface·TE cooled high stability and lowdark counts·High signal/noise ratio >1000·0.75 to 20nm resolution versionsavailable·Configurable in wavelength rangeof 800 -1700nm·Custom configurations andapplication support

BTC211E TE Cooled Linear InGaAs Array Spectrometer (USB 2.0/1.1)

BTC31X are low cost and highresolution TE cooled linear CCDspectrometers. It is equipped with a2048 elements thermoelectric cooled(TEC) linear CCD array, optimizedhigh throughput spectrograph,Windows based operating software,and fiber coupled input capability.They come in standard wavelengthranges of UV, Vis, NIR or customspecified. Pixel resolution of0.035nm or better can be supplied.

Highlights ·TE cooled high stability and lowdark counts·High signal/noise ratio >1000·0.035nm maximum pixel resolutionversions available·Ideal for low light level applica-tions·Custom configurations andaplication support·Configurable in wavelength rangeof 200 - 1100nm·16 bit digitizer with USB 2.0/1.1interface

BTC31XE High Resolution TE Cooled Linear CCD Spectrometer

Highlights ·14 bit digitizer with USB 2.0compatiable interface·TE cooled high stability and lowdark counts·1.0 to 50nm resolution versionsavailable·Configurable in wavelength rangeof 1100 -2900nm·Custom configurations andapplication support

BTC500E TE Cooled Linear PbS Array Spectrometer (USB)BTC500E spectrometers areequipped with 256 elementsthermoelectricaly cooled (TEC) linearPbS arrays, optimized high through-put spectrographs, Windows basedoperating software and fiber coupledinput capability. The BTC500Espectrometers are suitable for longwave NIR applications. Resolution of1.0nm or better can be supplied.

11




BRC711E is a low cost and highperformance linear PDA spectrometerwith high speed plug and play USB2.0 or 1.1 interface. It is equippedwith a 512 or 1024 elements linearPDA array, optimized high throughputspectrograph, 16 bit built-in digitizer,Windows based operating software,and fiber coupled input capability.BTC711E spectrometers come instandard wavelength ranges of UV,Vis, NIR or custom specified. Pixelresolution of 0.3nm or higher can besupplied.

Highlights

·Enhanced QE in NIR·High UV response·High dynamic range·Plug and play USB 2.0/1.1interface·16 bit digitizer·No moving parts·512 or 1024 elements PDAs·Portable and light weight

BRC711E Fiber Coupled NIR Enhanced PDA Array Spectrometer

The BRM fiber coupled High-powerlaser module is an integratedpackage of laser driver, TE cooler,and controller as well as high-brightness fiber coupled laser at785nm @ >1.5W. It is specificallydesigned for Raman spectroscopy.Both OEM and portable bench topversions are available. The OEMmodule is powered by 5V DC. It alsoprovides a TTL modulation port,which can accept a modulationcontrol input of up to 100kHz.

Highlights·785nm @ >1.5W

·100um @ 0.22NA fiber

·Narrow spectral width (0.2nm)

·Compact and rugged package

·Convenient 5V DC input (OEM)

·Ideal for Raman excitation

·Medical and sensor instrument·Other industrial Applications

NEW CLEANLAZETM FOR RAMAN SPECTROSCOPY

System and Accessory OptionsLVF- Linear variable order sorting filters for UV/Vis,Vis/NIR and UV/Vis/NIR configurations

FLA-100- Focusing lens assembly sensitivity en-hancement option for installation inside array spec-trometers

BIS-1.5- 1.5 inch integrating sphere or cosine correc-tor with SMA905 fiber coupler

SCL-12- Portable spectral calibration source powersupply assembly, including a 12V DC power adapter,requires a calibration lamp assembly for operation

SCL-Hg- Mercury calibration lamp assembly withSMA905 fiber coupler, to be used with SCL-12

SCL-Ar- Argon calibration lamp assembly withSMA905 fiber coupler, to be used with SCL-12

SCL-Ne- Neon calibration lamp assembly withSMA905 fiber coupler, to be used with SCL-12

BRM-785 Narrow Linewidth Fiber Coupled Laser

12




BDS100 is a turnkey fiber coupledUV/Vis/NIR light source, It provides aspectral output of 200 -1100nm. TheUV lamp is based on RF technologyproviding the advantage of low heatgeneration and power consumption.The light source comes completewith DC power supply. Safetyshutter, individual on/off controls forthe deuterium and tungsten lampsare provided.

Highlights·Individual lamp and shutter control·High output power stability·Fiber coupling capability·Compact in size·Ideal for spectroscopy

·Spectral output 200 - 1100nm

BDS100 UV/Vis and NIR Deuterium/Tungsten Light Source

BDS130 is a turnkey fiber coupledUV/Vis/NIR light source. It provides aspectral output of 200 -1100nm. Themicrocontroller controlled D2 andtungsten lamp operation provideslong term output power stability. Thelight source comes complete withpower supply, safety shutter, as wellas individual on/off controls for thedeuterium and tungsten lamps.

Highlights·Individual wavelength band and shutter control·High output power stability·Fiber coupling capability·Compact in size·Ideal for spectroscopy·Spectral output 200 - 1100nm

BDS130 UV/Vis and NIRDeuterium/Tungsten Light Source

The BPS100 series is a line of lowcost and high performance constantphoto intensity tungsten light sourceproducts. By use of photo intensityfeedback control, the BPS100demonstrates up to one order ofmagnitude improvement in outputpower stability compared withconventional sources when operatedunder constant current mode.BPS100 is ideal for spectroscopicapplications in visible and near IR.

Highlights·Constant photo intensity control

·Built-in filter holder

·Fiber coupling capability

·Compact in size

·Ideal for spectroscopy

·Spectral output 380 - 2700nm

BPS100 Photo Intensity Feedback Controlled Tungsten Light Source

13




FPC series fiber patch cords areconstructed by use of high qualityoptical fibers and couplers. Availablefibers range from a core diameter of50 up to >1000 um at numericalapertures from 0.22 (or custom.)Fiber material options include UV,Vis, NIR, and mid IR. Custom fiberbundles and fiber probes are alsoavailable.

Highlights ·High transmission·SMA 905, FC, ST, and customterminations·Fiber diameter from 50 to > 1000um·Available NA from 0.12 to 0.37·Custom fiber bundles and fiberprobes

FPC Series Fiber Patch Cord

BRP series fiber reflectance probesare constructed by use of highquality optical fibers and couplers.The standard assembly consists ofsix delivery and one return strands.The compact and flexible design ofthe probes make it ideal for reflec-tance measurement applications.Available fibers range from a corediameter of 100 up to 400um atnumerical aperture of 0.22. Fibermaterial options include UV, Vis,NIR, and mid IR.

Highlights ·High transmission·SMA 905, FC, ST, and customterminations·Six illumination and detectionconfigurations·Fiber diameter from 10 to 400um·Available NA from 0.12 to 0.37·Custom fiber bundles and fiberprobes

BRP Fiber Reflectance Probe

BCH100/BFH105 series cuvette/filtersample holders are designed for fiberoptic illumination/detection coupling,and ease of sample handling. Itholds a standard 10 x 10mm cuvetteor a 10mm thick filter for analyticalapplications. The cuvette sampleholder provides SMA 905 fibercoupling and is ideal for use withBTC series spectrometers and BDS/BPS series light sources.

Highlights ·Holds standard 10 x 10mmcuvette or 10mm thick filters·SMA 905 fiber coupling·Spring loaded sample holder forloading precision·UV, Vis and NIR versionsavailable·Custom sample holders available

BCH100/BFH105 Fiber Coupled Cuvette/Filter Sample Holder

14




BRP series products are compactfiber coupled Raman probes. Theprobe comes with focusing elementfor efficient sampling through glassand plastic, as well as othersamples. Excitation wavelengthoptions available for the BRP probesin visible and NIR. The probe designalso allows for long fiber cables to beused due to the elimination ofRaman scattering from fibers. Theunique design offers high Rayleighrejection.

Highlights ·Flexible fiber coupling·473, 488,514, 532, 785nm andother wavelength options*·>OD 6 Rayleigh rejections*·Process probes available·Fiber background eliminated for

BRP Fiber Optic Raman Probe

*See laser sections for excitation laser sources

We recommend BWB and BWN (page 16) for fluorescence and Raman excitation applications; BRM-785 narrow linewidth laser source (page 18) for Raman applications;BWF-OEM low cost fiber coupledlaser modules (page 17) for Raman and other applications.

15

Rev. 012204 BLUE/ GREEN/ YELLOW/ RED/ NIR LASER



The BWB series are very compact,self-contained, TE cooled, sold-stateViolet/Blue (375 - 475nm) lasers.They can be operated over 10 to35°C with a stable and quiet laseroutput power. The excellent quality ofthe beam mode and its low diver-gence make the lasers suitable forbeam focusing and long distancebeam positioning. The compactpower supply has all the applicablesafety features, such as key-lockswitch, emission indicator andremote connector.

Applications·Metrology·Wafer Inspection·Printing·Micro-material Processing·Medicine·Particle counting·Photoluminescence·Signal transmission

BWB Series Low Noise Violet/Blue Laser

The BWN series are compact, self-contained, double thermoelectric(TE)-cooled, solid-state Green/Red/Yellow (532 - 635nm) lasers. Theyproduce a stable and quiet laseroutput power over 10 to 35°C. Theexcellent quality of the beam modeand its low divergence make thelasers suitable for beam focusingand long distance beam positioning.The compact power supply has allthe applicable safety features, suchas key-lock switch, emissionindicator and remote connector.

Applications·Spectroscopy·Wafer Inspection·Micro-material Processing·Particle Counting·Signal Transmission·Metrology·Printing·Medicine·Photoluminescence·Pointing* End user and OEM power supplyversions are available

BWN Series Low Noise Green/Red/Yellow Laser

The BWR series are self-contained,TE cooled, diode-pumped, nearInfrared (1064nm) Nd:YVO4 lasers.They produce a stable laser outputpower (20 - 1500mW) over 0 to 40°C.These are CDRH compliant lasersystems. The excellent quality ofthe beam mode and its low diver-gence make the lasers suitable forbeam focusing and long distancebeam positioning. The power alsoprovides optional TTL (or Analog)modulation input for up to 25 kHz.

Applications·Optical Trapping·Wafer Inspection·Material Processing·Particle Counting·Metrology·Printing·Medicine·Illumination·Pointing·Photoluminescence

*End user and OEM power supplyversions are available

BWR Series Diode Pumped Solid State NIR Laser

* End user and OEM power supplyversions are available

16

Rev. 012304FIBER COUPLED DIODE LASER



BWF2 Series are compact turnkeyfiber-coupled laser systems providingup to 30W of continuous power. Theunique design of BWF2 includesfeatures such as optional visible (redor green) aiming beam, multifunc-tional relay controller for versatilelaser operation, and a remote port forexternal modulation and controlpurpose. Available options includelens assembly with SMA 905connector, and interface TTL oranalog ports for main and aimingbeam controls .

Highlights• Power delivered by high-bright-ness fiber of up to 45W• Stand alone self-containedsystem• Compact, TEC with forced aircooling• 630-1600nm wavelengthsavailable• OEM system option available

BWF2 High Power Portable Bench Top Fiber Coupled Laser System

The BWF3 Series are rack mount turn-key fiber-coupled laser systems pro-viding up to 150W of continuous power.The unique design of BWF3 includesoptional features as visible (red orgreen) aiming beam, multifunction re-lay controller for versatile laser opera-tions, and a remote port for externalmodulation and control purpose. Avail-able options include lens assemblieswith SMA 905 connector, and interfaceTTL or analog ports for main and aim-ing beam controls

Highlights·Power delivered by high-bright-ness fiber of up to 150W·Stand-alone self-contained system·Compact, TEC with forced aircooling·630-1600nm wavelengths available·OEM system option available

BWF3 High Power Rack Mount Fiber Coupled Diode Laser System

The BWF5 group are compact highpower diode lasers designed forOEM medical applications. Byusing color LCD touch screen andmicrocontroller based design theyprovide intelligent safety features,ease of operation, and programmableoperation settings. Features alsoinclude innovative fiber calibrationport to accommodate a variety offibers while providing well regulatedand optimum output power. It alsoprovides means of alerting operatorsabout degraded or defective fibers.

Highlights·High power available for demand-ing applications·Up to 45W power delivered byflexible fibers·Easy OEM integration·Compact, microcomputer con-trolled·405-1600nm wavelengths available·Touch screen LCD for easyoperation

BWF5 Microcomputer and Touch Screen Controlled Laser Diode System

17

Rev. 012304 FIBER COUPLED DIODE LASER



The BWF-OEM fiber coupled high-power OEM diode laser modules arecompact integrated packages oflaser driver, TE cooler, TEC controllerand high-brightness fiber pigtailedLDs at various wavelengths (630 -1900nm) and power output of up to2W. All components are enclosed inan airtight, extru aluminum housing.The module is powered by 5V DCand has a TTL modulation port,which can be operated at up to100kHz.

Highlights·2.0W @100um @0.22 NA·1.2W @ 50/100um @ 0.22/0.12NA·630 – 2000nm wavelength·Narrow spectral width (<3nm)·Compact and rugged package·Convenient 5V DC input·Modulation control of up to100kHz

BWF-OEM Compact Fiber Coupled Diode Laser Module

The BRM fiber coupled High-powerlaser module is an integratedpackage of laser driver, TE cooler,and controller as well as high-brightness fiber coupled laser at785nm @ >1.5W. It is specificallydesigned for Raman spectroscopy.Both OEM and portable bench topversions are available. The OEMmodule is powered by 5V DC. It alsoprovides a TTL modulation port,which can accept a modulationcontrol input of up to 100kHz.

Highlights·785nm @ >1.5W

·100um @ 0.22NA fiber

·Narrow spectral width (0.2nm)

·Compact and rugged package

·Convenient 5V DC input (OEM)

·Ideal for Raman excitation

·Medical and sensor instrument·Other industrial Applications

NEW CLEANLAZETM FOR RAMAN SPECTROSCOPYBRM-785 Narrow Linewidth Fiber Coupled Laser

18

Rev. 012304LASER DRIVER/CONTROLLER



The BWDT-2A-OEM and BWDT-2A-OEM-S diode laser driver boards arecompact designs for driving B&WTEK’s DPSS lasers, high power LDsas well as other compatible LDs.Options include TEC drivers, moni-toring ports and TTL or analogmodulation input ports. The TECcontroller in the 2A-OEM-S providescooling capability while the 2A-OEMsupports bidirectional (cooling +heating) operations of the TEC.They support constant current orconstant power operation.

Highlights·Built in Diode Laser Protection·Constant Current or Power Mode

·TTL/ Analog Modulation Capability·Optional Bidirectional TEC controls

·Single 5V DC operation

The BWDT-8 diode laser driver boardsare compact designs for driving B&WTEK’s DPSS lasers, high power LDsas well as other compatible LDs. Ananalog interface monitoring port is pro-vided via a D-SUB connector for con-trol and monitoring of operation param-eters. The board drives up to 8 chan-nels of laser diodes simultaneously atup to 2A operating current per chan-nel.

Highlights·Driving up to 8 diode lasers·Control of 8 TE Coolers·48V DC power supply·Driving current control port·Average driving current monitoring·Individual channel on/off controllines·MM LD output power monitor·Case temperature monitor

19

Rev. 012104



TERMS AND CONDITIONS

Prices and Quotations

All quotations written or verbal are valid for 30 days fromthe date of quotation unless stated otherwise. Pricesare based on your requested specifications and quanti-ties, and are subject to change if any changes are madefrom the original request.

Prices quoted by B&W TEK are for F.O.B. factory.Special items will be individually priced per providedspecifications. All published prices are subject tochange without notice. An extra 20% handling fee oneach item is applied to international orders.

Purchase Orders and PaymentMethods

Purchase orders are accepted by mail, e-mail or fax.Hard copies of the purchase orders are required. Tominimize errors, please reference the B&W TEK quota-tion numbers. Provide also item description, purchaseorder number, ship-to and bill-to address and shippingmethod desired.

Open accounts of net 30 with approval of credit limit.Contact B&W TEK for further information.

Orders placed with MasterCard or VISA may be ac-cepted for US government customers only. Pleaseprovide account number, card holder, billing address, andexpiration date that are associated with the card to beused.

Orders may be shipped via UPS or Federal Express on aCOD basis. Cash, a money order or a bank or companycheck is required at the time of delivery.

Prepayment is required for international orders. Moneyorder, wire transfers, bank check, company check orpersonal check may be accepted. In case a letter ofcredit (L/C) is required. The customer will be respon-sible for the charges incurred by the L/C.

Delivery and Shipping

Rush orders placed by phone (for items in stock at timeof order) will be shipped within 2 working days. Most

other standard items can be shipped within 6 weeks.Delivery times for special orders will be established perquotation.

FedEx is our default shipping carrier although UPS andairfreight are available. If not specified clearly on thepurchase order at the time of ordering Airborne expresswill be used by B&W TEK at the time of shipping. Uponrequest, the tracking numbers will be provided.

Returns and Cancellation Fee

A Return Material Authorization number (RMA) is re-quired for any returned goods. Original purchase ordernumber, date of shipment and serial number must beprovided before the RMA can be issued. All the returnsshould be shipped with the original packaging materi-als with the assigned RMA number(s) clearly marked.The restocking fee will be determined after the items areinspected at B&W TEK. No product(s) will be acceptedfor restocking after 45 days. A cost estimate will beprovided by B&W TEK for out of warranty items. Spe-cially designed products damaged by the customer maynot be returned.

Should it become necessary to cancel or modify ordersprior to shipment, a restocking fee of 15 to 50% of thetotal order amount will be charged by B&W TEK Tek forreturns to stock. Specially designed products damagedby the customer may not be returned.

International Customers

Please make payment in United States dollars to bedrawn on a United States Bank. Certain items may besubject to export control and require a validated exportlicense.

Warranty Terms and Conditions

B & W TEK’s end user products, OEM modules, andcomponents are warranted to be free from defects inmaterials and workmanship for a period of 12 months, 6months, and 90 days, respectively, from the date ofinitial shipment. This warranty does not extend toincidental or consequential damages and to damagecaused by negligent or improper handling in use, stor-age, nor for products for which the original identificationmarkings or labels have been removed, defaced oraltered.

20

Rev. 012104



Special contracts or contracts for nonstandard productsmay have modified terms of warranty and, in suchcases, the terms as stated in the individual contractmust be signed by the duly authorized officer of B & WTEK and will supersede the standard terms.

B & W TEK will make final determination as to cause orexistence of defect and, at its option repair or replacethe products, which prove to be defective during thewarranty period. Products replaced under warranty willbe warranted only for the balance of the warranty periodfrom the original supplied equipment.

This warranty extends only to the original purchaser ofthe equipment from B & W TEK. The purchaser mustnotify B & W TEK within 15 days of first noticing thedefect and promptly return the defective product uponreceipt of RMA number(s) before expiration of thewarranty period.

Products believed by purchaser to be defective shall bereturned to B & W TEK transportation and insuranceprepaid by purchaser. Repaired or replaced products willbe returned to purchaser by B & W TEK, FOB citydestination within the Continental United States, Trans-portation beyond these limits will be charged to pur-chaser.

Warranty Return Procedure

Review terms of purchase and date of shipment todetermine validity of warranty claim. Warranty claimshould only be made for products within terms of war-ranty policy.

Contact B & W TEK and obtain authorization to returnthe item(s) in the form of an RMA (Return materialauthorization) number. For customers in the USA andcountries where distributorship and/or representation isnot available, all claims should be addressed to:

Customer ServiceB & W TEK INC.825 Dawson Dr., Suite 1Delaware Industrial ParkNewark, DE 19713

Be prepared to furnish:

a. Product Model number and serial numberb. Date of shipment/purchasec. Brief description of the problems encountered

d. Name of contact person and phone number(s) at your organization for further communica tion.

Obtain B & W TEK’s instructions for transportation andpackaging and ship the product (freight and insuranceprepaid) with the proper documentation containing theRMA number and the information specified above.

B & W TEK will advise the purchaser of its determinationof warranty at the earliest possible time. Providingcomplete information as requested will expedite theprocedure.

Safety Warnings

The laser products described in this catalog emitvisible or invisible radiation power. They aresafe to operate only when the users follow allsafety measures:

a) Post warnings in the area where the laserbeam passes to alert those present.

b) Keep all unauthorized personnel out of thearea where the laser is operated.

c) Whenever the laser is running and the beamis not in use, it is a good practice to mechani-cally block the radiation path.

d) Never look directly into the laser beam pathor scattered laser light from any reflective sur-faces,

e) Never look directly into the laser source.

f) Maintain experimental setup at lower levelto prevent inadvertent beam-eye contact.

g) As a precaution against accidental expo-sures to the laser beam or its reflection, op-erators should wear laser safety glasses withsufficient attenuation at the laser emissionwavelength .

21

Rev. 012104



CDRH Compliant System

The BWB, BWN, BWT, and BWR series lasersystems, which are certified to be in compliancewith Class IIIa, IIIb, or IV, are equipped with key lockswitch, remote control connector, laser radiationemission detector, emission time delay (in thelaser driver), a beam attenuator (shutter), emer-gence switch (Class IV only) and appropriatewarning labels. The following is a consolidate labelwhich is located on the laser head. It includesaperture label, warning logotype label and certifica-tion/identification label designed to warn the user ofpotential hazard. There are three blanks will befilled with a specific laser wavelengths (350nm –1650nm), power level (1mW – 5W) and properlaser class (IIIA, IIIB and IV).

Non-CDRH Compliant OEM modules

The BWB, BWN, BWT, BWT, and BWR serieslaser are also provided to customers as an OEMcomponent to be incorporated into a system. Themodules will be provided to customer either laserhead only, or with a B&W TEK’s OEM driver or tobe incorporated with the drivers provided by cus-tomers. In the above mentioned “OEM modules”:

1) OEM versions are non-CDRH compliant de-vices. These modules are sold as a componentinto other equipment.

2) An OEM label is attached to the modules andstates “This product is sold as a component forincorporation into other equipment. The purchaserassumes responsibility to comply with US 21 CFR1040 with regard to the use of this laser and itsintroduction into commerce.”

3) B&W TEK will provide all the necessaryassistances to help customers achieve the re-quired CDRH compliance.

4) There are built-in safety features in OEM laserdriver. Such as the emission delay, emissionindicator and interlock which will enable purchaserto easily reconfigure the system to be in compli-ance with CDRH requirements.

For Further Information

Contact following organizations for further informa-tion regarding laser safety issues.

Center for Device and Radiological HealthOffice of Compliance2098 Gaither Rd.Rockville, MD 20850Tel: 301-594-4654Fax:301-594-4672

Laser Institute of America12424 Research Parkway, Suite 125Orlando, FL 32826Tel: 407-380-1553

short form catalog - versatis catalog.pdf · 2004-04-27 · 1 rev. 012104 825 dawson drive, suite...

Documents