shb1000 user manual - simionic – get more with … user manual v1.3 1 thank you! thank you for...
TRANSCRIPT
SHB1000UserManual
Version1.3Oct13rd2017SIMiONIC
SHB1000UserManualV1.3
1
ThankYou!ThankyouforchoosingSIMiONICproduct. ThisSHB1000isaduplicationoftheGarminG1000bezelworkingwiththePFDorMFDapppresentedbySIMiONICwhichrunsoniPads. Ifyouhaven’tdownloaded theappsyet, scan theQRcodesbelowtodownloadthemfromAppStore.
PFD MFDSupportediPad:Dimension: 240x169.5x7.5mm(9.4x6.6x0.29in) 240x169.5x6.1mm(9.4x6.6x0.24in)Type: iPad5(2017) 9.7”iPadPro(discontinued) iPadAir2(discontinued) iPadAir(discontinued)
SHB1000UserManualV1.3
2
Overview
1. Bezel2. iPad(notincluded)3. Power/Bluetoothindicator
4. Extensionport5. USBpowerinput
3
Unpacking
SHB1000 Bezelstand(3parts)
5.5x7mm Hexkeys USBcable doubleend-open 2.0mm&2.5mm wrench
M3x6mm hexsocketbutton M3hexnutx4 headscrewx4
SHB1000UserManualV1.3
4
PrepareyouriPadWhen the iPad ismounted in thebezel, youcannot reachanybuttons on the iPad any more. Before doing that, it’srecommendedtosetyouriPadasbelow:1. EnableMultitaskingGestures2. Enable“HeySiri”
Assembling1. Disassemblethebacksheetusing2.0mmhexscrewdriver
SHB1000UserManualV1.3
5
2. Insert iPad into the bezel from the top. Pay attention tothedirectionoftheiPad.
3. ConnecttheiPadwithlightningcable(notincluded)
SHB1000UserManualV1.3
6
4. AdjustthepaddingblockstofityouriPad. Fitthepositionlugs into thebigholes for iPadAir, small holes for iPadAir2and9.7”iPadPro
5. Assemble the back sheet. Make sure that the lightningcabledoesn’tinterferewiththepaddingblocks.
SHB1000UserManualV1.3
7
6. Installthebezelstand
7. Or mount the bezel on your instrument panel with thecutoutbelow:
SHB1000UserManualV1.3
8
8. PlugintheUSBpower(USBpoweradapterisnotincluded). The bezel will do a self-test by lighting up backlightmomentarilywhenpowerisapplied.
USBpowerrequirement Backlighton BacklightoffWithiPadpluggedin <1000mA <800mAWithoutiPadpluggedin <200mA <20mAAccording to the power consumption listed above, minimumUSB power output requirement is 1000mA(5W). To give itenough margin, a USB power adapter with the capability of2000mA(10W)outputisrecommended.
SHB1000UserManualV1.3
9
Bluetoothconnection1. MakesuretheiPadisconnectedtothebezelwithlightningcableandUSBpowerisapplied.
2. Power/Bluetoothindicatorwillblinkwhitewhenthebezelisnotconnectedtoanydevice.
SHB1000UserManualV1.3
10
3. Press“NOSEUP”and“NOSEDN”atthesametimetowakeup iPad. Unlock the iPad and launch PFD or MFD app. OniOS 10, slide right on the lock screen to show the searchingpage,searchtheappandrunitdirectly.
Or,say“HeySiri”towakeuptheiPadif“HeySiri”isenabled.
4. MakesureyouhaveturnedontheBluetoothontheiPad.5. Taptheupperrightcornertoopenthesettingswindow.
SHB1000UserManualV1.3
11
6. Select “Hardware Bezel” on the left. You will see theavailablebezel(s)inthelistas“SHB1000”followedbyaUUID.
7. Tap on the item to connect the bezel. If you havemorethan1 bezel in the list,make sure you are selecting the rightonebycheckingthesignalstrengthorjusttryone.
SHB1000UserManualV1.3
12
8. When thebezel is connected, the “Disconnect”buttonwillshowup,disconnectthebezelbytappingthatbuttonwhenyouneed to. By default, the program will also turn off iPadauto-lock(keepsiPadalive)whenthebezelisconnected. Youcanadjustbezelbacklightbyslidingthebacklightcontrol.9. ThePower/Bluetoothindicatoronthebezelwillchangetosolid white also indicating that the bezel is connected to theiPad.10. Ifyoudon’tdisconnectthebezelmanuallybeforeyouquitthe PFD or MFD app, the bezel will be disconnectedautomatically and connect automatically the next time youopentheapp.
SHB1000UserManualV1.3
13
LimitedWarranty 1. Theproductiscoveredbya1yearlimitedwarrantyfromthe
date of purchase, against any defects in materials orworkmanship.
2. This limited warranty does not cover any damage,deterioration or malfunction resulting from any improperuse.
3. Wewill repair the product using either new or refurbishedreplacementparts.
4. To obtain warranty service, you must first contact us todeterminetheproblemandthemostappropriatesolutionforyou.
5. Shippingcosts forproductsreturned forwarrantyareneverincluded in the warranty. Shipping towards us as well asshippingfromustowardstheclientshallbepaidbytheclient.We may require pre-payment of return shipping costs inadvancedbybankprepaymentorothertypeofpayment.
Companyaddress:10242ndSouthBuilding,SoftwareParkNo.18Hi-TechWestRoadHi-TechIndustryDistrict,TianjinChinaSupporte-mail:[email protected]