sensor balluff fotoelectrico_datasheet
TRANSCRIPT
2.1.1
2.1
mini.s
mini.s
Round style2.1.2 BOS 08M
M8 Metal2.1.6 BOS 12M
M12 Metal2.1.16 BOS 18M
M18 Metalwith potentiometertoughwith teach-inLaserwith AC voltagewith angled head
2.1.46 BOS 18EM18 stainless steel
2.1.52 BOS 18KFM18 plasticLaser
2.1.70 BOS 18KWM18 plasticwith angled headLaser
2.1.84 BOS 18K(R)M18 plastic
2.1.92 BOS 30MM30 metal
Cube style2.1.96 BOS Q08M
mini.s2.1.100 BOS 2K
mini.s2.1.110 BOS 5K
mini.swith potentiometer
2.1.118 BOS 6Kmini.swith teach-inLaser
2.1.130 BOS 15K2.1.136 BOS 21M
Laser2.1.148 BOS 26K
Laser2.1.156 BOS 36K2.1.162 BOS 65K
ContentsPhotoelectricSensors
Photo
ele
ctri
c Senso
rs –
Sta
ndar
d
2.1.2
BOS 08MConnectionAccessories
The new dimension fromBalluff – small in size,big in performance
Miniaturization in the Balluffline continues at full pace.The new Opto-mini.sBOS 08M sensors stand outwith ease of handling andfixed sensing distances andranges.
This sensor family includesdiffuse sensors in tubularM8 housing, retroreflectiveand through-beam sensors.
These small photoelectricsensors open up possibilitiesin high-dynamic applicationssuch as on robot gripperarms. Here is wherecomponents with the lightestweight, a small footprint andyet the greatest switchingprecision are demanded.
In short: The new BOS 08Mare small, tough, flexible andeconomical.
Diffuse, Retroreflective,Through-beam Receiver
Wiring diagrams
Through-beam emitter
Recommendedaccessoriesplease order separately
ConnectorBKS-_ 48/BKS-_ 49
ReflectorBOS R-9
PhotoelectricSensors
BOS 08MProduct Overview
2.1.3
Photoelectricsensorsaccessoriespage 2.3.2 ...
2.1
2.3
Type
DiffuseBOS 08M-PS-RD10-S49BOS 08M-PO-RD10-S49BOS 08M-PS-RD10-03BOS 08M-PO-RD10-03
RetroreflectiveBOS 08M-PS-PR10-S49BOS 08M-PO-PR10-S49BOS 08M-PS-PR10-03BOS 08M-PO-PR10-03
Through-beamBOS 08M-PS-RE10-S49BOS 08M-PO-RE10-S49BOS 08M-PS-RE10-03BOS 08M-PO-RE10-03
BOS 08M-X-RS10-S49BOS 08M-X-RS10-03
OutputLighttype
Sensingdistance/range
0...55 mm0...55 mm 0...55 mm0...55 mm
25...550 mm25...550 mm25...550 mm25...550 mm
0...1.1 m0...1.1 m0...1.1 m0...1.1 m
0...1.1 m0...1.1 m
Connec-tion
500 Hz500 Hz500 Hz500 Hz
500 Hz500 Hz500 Hz500 Hz
500 Hz500 Hz500 Hz500 Hz
Outputfunction
Page
2.1.42.1.42.1.42.1.4
2.1.42.1.42.1.52.1.5
2.1.52.1.52.1.52.1.5
2.1.52.1.5
Specialfeatures
Red
ligh
t
Infra
red
M8
conn
ecto
r, 3-
pin
Cab
le, 3
m
10...
30 V
DC
Pol
ariz
ing
filte
r
NP
N-T
rans
isto
r
PN
P-T
rans
isto
r
Ligh
t-on
Dar
k-on
UBSwitchingfrequency
mini.sM8 Metal
www.balluff.com
Connectors ...page 5.2 ...
5
PhotoelectricSensors
BOS 08MSensing distance 55 mmRange 550 mm
2.1.4
25...550 mm
BOS 08M-PS-PR10-S49BOS 08M-PO-PR10-S49
10...30 V DC10 %20 mA
PNP-Transistor100 mA
Light- or dark-on≤ 2 Vfixed
25...550 mmLED, red light
640 nm
LED red
1 ms500 Hz
M8×57.5 mmM8 connector, 3-pin
Nickel plated brassPMMA13 g
IP 67yesyes
–10...+60 °CEN 60947-5-2
0...55 mm
BOS 08M-PS-RD10-03BOS 08M-PO-RD10-03
10...30 V DC10 %20 mA
PNP-Transistor100 mA
Light- or dark-on≤ 2 Vfixed
0...50 mmLED, red light
640 nm
LED red
1 ms500 Hz
M8×50 mm3 m cable, PUR
3×0.14 mm²Nickel plated brass
PMMA47 g
IP 67yesyes
–10...+60 °CEN 60947-5-2
0...55 mm
BOS 08M-PS-RD10-S49BOS 08M-PO-RD10-S49
10...30 V DC10 %20 mA
PNP-Transistor100 mA
Light- or dark-on≤ 2 Vfixed
0...50 mmLED, red light
640 nm
LED red
1 ms500 Hz
M8×57.5 mmM8 connector, 3-pin
Nickel plated brassPMMA13 g
IP 67yesyes
–10...+60 °CEN 60947-5-2
Diffuse Sensing distanceRetroreflective RangeThrough-beam Range
DiffusePNP, NO 55 mmPNP, NC 55 mmRetroreflectivePNP, NO 550 mm polarizing filterPNP, NC 550 mm polarizing filterThrough-beamPNP, NO 1.1 m ReceiverPNP, NC 1.1 m Receiver
1.1 m EmitterElectrical dataSupply voltage UB
RippleNo-load supply current I0 max.Switching outputOutput currentSwitching typeVoltage drop Ud at IeSettingsOptical dataRecommended sensing distance/rangeEmitter, light typeWavelengthIndicatorsOutput function indicatorTime dataResponse timeSwitching frequency fMechanical dataDimensionsConnectionNo. of wires × cross-sectionHousing materialOptical surfaceWeightAmbient dataDegree of protection per IEC 60529Polarity reversal protectedShort circuit protectedAmbient temperature range Ta
Ambient light rejection per
Diffuse values referenced to Kodak gray card 90% Reflexion.Retroreflective values referenced to R9 reflector.
PhotoelectricSensors
BOS 08MRange 550 mm, 1.1 m
2.1.5
0...1.1 m
BOS 08M-PS-RE10-03BOS 08M-PO-RE10-03
10...30 V DC10 %15 mA
PNP-Transistor100 mA
Light- or dark-on≤ 2 Vfixed
0...1 m
LED red
1 ms500 Hz
M8×50 mm3 m cable, PUR
3×0.14 mm²Nickel plated brass
PMMA47 g
IP 67yesyes
–10...+60 °CEN 60947-5-2
0...1.1 m
BOS 08M-X-RS10-03
10...30 V DC10 %15 mA
fixed
0...1 mLED, red light
640 nm
M8×50 mm3 m cable, PUR
2×0.14 mm²Nickel plated brass
PMMA47 g
IP 67yesyes
–10...+60 °CEN 60947-5-2
0...1.1 m
BOS 08M-PS-RE10-S49BOS 08M-PO-RE10-S49
10...30 V DC10 %15 mA
PNP-Transistor100 mA
Light- or dark-on≤ 2 Vfixed
0...1 m
LED red
1 ms500 Hz
M8×57.5 mmM8 connector, 3-pin
Nickel plated brassPMMA13 g
IP 67yesyes
–10...+60 °CEN 60947-5-2
0...1.1 m
BOS 08M-X-RS10-S49
10...30 V DC10 %15 mA
fixed
0...1 mLED, red light
640 nm
M8×57.5 mmM8 connector, 3-pin
Nickel plated brassPMMA13 g
IP 67yesyes
–10...+60 °CEN 60947-5-2
25...550 mm
BOS 08M-PS-PR10-03BOS 08M-PO-PR10-03
10...30 V DC10 %20 mA
PNP-Transistor100 mA
Light- or dark-on≤ 2 Vfixed
25...500 mmLED, red light
640 nm
LED red
1 ms500 Hz
M8×50 mm3 m cable, PUR
3×0.14 mm²Nickel plated brass
PMMA47 g
IP 67yesyes
–10...+60 °CEN 60947-5-2
Photoelectricsensorsaccessoriespage 2.3.2 ...
2.1
2.3
mini.sM8 Metal
www.balluff.com
Connectors ...page 5.2 ...
5
PhotoelectricSensors
Features
– Supply voltage10...30 V DC,polarity reversal protected
– Function indicatorfor the output
– Degree of protection IP 67– Standard (M12×1)
metal housing– Red and infrared light
versions– Fixed and adjustable
sensitivity– PNP or NPN,
light switching ordark switching
– Cable and connectorversions (M12 connector)
One feature stands out inall these ingenious designs:Simplicity.
Series BOS 12M representsa radical simplification ofsensor technology for themost common applications.
All the sensors are enclosedin the same housing as atypical inductive proximityswitch (M12×1). This meansphotoelectric sensorsand inductive proximityswitches are mechanicallyand electricallycompatible!As for mounting, there is nosimpler concept for sensorsthan a bore hole.
This brings simplification tothe design of the system ormachine, makes conversionsof the sensing principleeasier while using multi-useof the accessories toreduce inventory. Thatmeans standardizationand simplification of thesensors. Series BOS 12Min the tough metal housingis fully potted, with anenclosure rating of IP 67.
There is a new laser through-beam model available in2 versions. For long range orsmall parts detection.
BOS 12M
Applications
– General automation tasks– Assembly and handling– Machine tools– Packaging– Robots– Machine tool building
2.1.6
PhotoelectricSensors
BOS 12MProduct Overview
2.1.7
Photoelectricsensorsaccessoriespage 2.3.2 ...
2.1
2.3
Type
Diffusewith HGA
BOS 12M-PS-1N1I-S4-CBOS 12M-PU-1HA-S4-C
DiffuseBOS 12M-PS-1YA-S4-CBOS 12M-PO-1YA-S4-CBOS 12M-PS-1YA-B0-C-03BOS 12M-PO-1YA-B0-C-03
BOS 12M-PS-1YB-S4-CBOS 12M-PO-1YB-S4-CBOS 12M-PS-1YB-B0-C-03BOS 12M-PO-1YB-B0-C-03
BOS 12M-PS-1PD-S4-CBOS 12M-PO-1PD-S4-CBOS 12M-PS-1PD-B0-C-03BOS 12M-PO-1PD-B0-C-03
Retro-reflectiveBOS 12M-PS-1QA-S4-CBOS 12M-PO-1QA-S4-CBOS 12M-PS-1QA-B0-C-03BOS 12M-PO-1QA-B0-C-03
Through-beamBLE 12M-PA-1PD-S4-CBLE 12M-PA-1PD-B0-C-03
BLS 12M-XX-1RD-S4-LBLS 12M-XX-1RD-B0-L-03
LaserThrough-beam
BOS 12M-PA-LE10-S4BOS 12M-PA-LE10-03BOS 12M-NA-LE10-S4BOS 12M-NA-LE10-03
BOS 12M-XT-LS11-S4BOS 12M-XT-LS11-03BOS 12M-XT-LS12-S4BOS 12M-XT-LS12-03
OutputLighttype
Sensingdistance/range
0...24 mm10...60 mm
1...100 mm1...100 mm1...100 mm1...100 mm
1...200 mm1...200 mm1...200 mm1...200 mm
1...400 mm1...400 mm1...400 mm1...400 mm
0...1,5 m0...1,5 m0...1,5 m0...1,5 m
0...5 m0...5 m
0...5 m0...5 m
0...3 m0...3 m
0...30 m0...30 m
Connec-tion
1 kHz1 kHz
200 Hz200 Hz200 Hz200 Hz
200 Hz200 Hz200 Hz200 Hz
200 Hz200 Hz200 Hz200 Hz
200 Hz200 Hz200 Hz200 Hz
500 Hz500 Hz
1 kHz1 kHz1 kHz1 kHz
Outputfunction
Page
2.1.82.1.8
2.1.82.1.82.1.92.1.9
2.1.92.1.92.1.92.1.9
2.1.92.1.92.1.92.1.9
2.1.102.1.102.1.102.1.10
2.1.112.1.11
2.1.112.1.11
2.1.132.1.132.1.132.1.13
2.1.152.1.152.1.152.1.15
Features
Red
ligh
t
Infra
red
M12
con
nect
or, 4
-pin
Cab
le, 3
m
10...
30 V
DC
Pol
ariz
ing
filte
r
NP
N-T
rans
isto
r
PN
P-T
rans
isto
r
Ligh
t-on
Dar
k-on
Teac
h-in
UBSwitchingfrequency
M12 Metal
www.balluff.com
Connectors ...page 5.2 ...
5
Lase
r
PhotoelectricSensors
BOS 12MSensing distance 24 mm,60 mm, 100 mm
1...100 mm
BOS 12M-PS-1YA-S4-CBOS 12M-PO-1YA-S4-C
10...30 V DC10 %
≤ 20 mAPNP-Transistor
≤ 200 mALight- or dark-on
≤ 2.5 Vfixed
LED, red light660 nm
LED yellow
2.5 ms200 Hz
M12×70 mmM12 connector, 4-pin
Nickel plated brassPMMA30 g
IP 67yesyes
–15...+55 °C5 kLux
2.1.8
Diffuse with background suppression Sensing distanceDiffuse Sensing distance
DiffusePNP 24 mm HGAPNP 10...60 mm HGA, Teach-inPNP 100 mmPNP 100 mmPNP 200 mmPNP 200 mmPNP 400 mmPNP 400 mmElectrical dataSupply voltage UB
RippleNo-load supply current I0 max.Switching output*Output currentSwitching typeVoltage drop Ud at IeSettingsOptical dataEmitter, light typeWavelengthLight spot diameterDistance hysteresis (18 %/18 %)Gray value shift (90 %/18 %)IndicatorsOutput function indicatorStability indicatorTime dataResponse timeSwitching frequency fMechanical dataDimensionsConnectionNo. of wires × cross-sectionHousing materialOptical surfaceWeightAmbient dataDegree of protection per IEC 60529Polarity reversal protectedShort circuit protectedAmbient temperature range Ta
Ambient light rejection
Diffuse values referenced to Kodak gray card 90% Reflexion.
Wiring diagrams, characteristics and accessories see page 2.1.12 and 2.1.13.
10...60 mm
BOS 12M-PU-1HA-S4-C
10...30 V DC10 %
≤ 25 mAPNP-Transistor
100 mALight-/dark-on (selectable)
≤ 2.4 VTeach-in
LED, red light660 nm
5×5 mm at 50 mm≤ 5 %
≤ 10 %
LED yellowLED green
0.5 ms1 kHz
M12×74 mmM12 connector, 4-pin
Nickel plated brassPMMA30 g
IP 67yesyes
–20...+60 °C5 kLux
Teach-inkey
0...24 mm
BOS 12M-PS-1N1l-S4-C
10...30 V DC10 %
≤ 25 mAPNP-Transistor
100 mALight-on≤ 2.4 Vfixed
LED, red light660 nm5×5 mm≤ 5 %≤ 5 %
LED yellowLED green
0.5 ms1 kHz
M12×74 mmM12 connector, 4-pin
Nickel plated brassPMMA30 g
IP 67yesyes
–20...+60 °C5 kLux
www.balluff.com
PhotoelectricSensors
BOS 12MSensing distance 100 mm,200 mm, 400 mm
1...100 mm
BOS 12M-PS-1YA-B0-C-03BOS 12M-PO-1YA-B0-C-03
10...30 V DC10 %
≤ 20 mAPNP-Transistor
≤ 200 mALight- or dark-on
≤ 2.5 Vfixed
LED, red light660 nm
LED yellow
2.5 ms200 Hz
M12×65 mm3 m cable, PVC
3×0.34 mm²Nickel plated brass
PMMA136 g
IP 67yesyes
–15...+55 °C5 kLux
2.1.9
Photoelectricsensorsaccessoriespage 2.3.2 ...
2.1
2.3
1...200 mm
BOS 12M-PS-1YB-S4-CBOS 12M-PO-1YB-S4-C
10...30 V DC10 %
≤ 20 mAPNP-Transistor
≤ 200 mALight- or dark-on
≤ 2.5 Vfixed
LED, red light660 nm
LED yellow
2.5 ms200 Hz
M12×70 mmM12 connector, 4-pin
Nickel plated brassPMMA30 g
IP 67yesyes
–15...+55 °C5 kLux
1...400 mm
BOS 12M-PS-1PD-S4-CBOS 12M-PO-1PD-S4-C
10...30 V DC10 %
≤ 20 mAPNP-Transistor
≤ 200 mALight- or dark-on
≤ 2.5 VPotentiometer 270°
LED, infrared light880 nm
LED yellow
2.5 ms200 Hz
M12×70 mmM12 connector, 4-pin
Nickel plated brassPMMA30 g
IP 67yesyes
–15...+55 °C5 kLux
1...400 mm
BOS 12M-PS-1PD-B0-C-03BOS 12M-PO-1PD-B0-C-03
10...30 V DC10 %
≤ 20 mAPNP-Transistor
≤ 200 mALight- or dark-on
≤ 2.5 VPotentiometer 270°
LED, infrared light880 nm
LED yellow
2.5 ms200 Hz
M12×65 mm3 m cable, PVC
3×0.34 mm²Nickel plated brass
PMMA136 g
IP 67yesyes
–15...+55 °C5 kLux
PX1
288
42
70
M12x1
17
10.5 LEDns
1...200 mm
BOS 12M-PS-1YB-B0-C-03BOS 12M-PO-1YB-B0-C-03
10...30 V DC10 %
≤ 20 mAPNP-Transistor
≤ 200 mALight- or dark-on
≤ 2.5 Vfixed
LED, red light660 nm
LED yellow
2.5 ms200 Hz
M12×65 mm3 m cable, PVC
3×0.34 mm²Nickel plated brass
PMMA136 g
IP 67yesyes
–15...+55 °C5 kLux
NS NPN NONO NPN NC
BOS 12M-_ _ -1YA-S4-C
Output
*Ordering example for NPN transistor:
M12 Metal
Connectors ...page 5.2 ...
5
PhotoelectricSensors
0...1.5 m
BOS 12M-PS-1QA-B0-C-03BOS 12M-PO-1QA-B0-C-03
10...30 V DC10 %
≤ 20 mAPNP-Transistor
≤ 200 mALight- or dark-on
≤ 2.5 VPotentiometer 270°
LED, red light660 nm
LED yellow
2.5 ms200 Hz
M12×65 mm3 m cable, PVC
3×0.34 mm²Nickel plated brass
PMMA136 g
IP 67yesyes
–15...+55 °C5 kLux
BOS 12MRange 1.5 m
0...1.5 m
BOS 12M-PS-1QA-S4-CBOS 12M-PO-1QA-S4-C
10...30 V DC10 %
≤ 20 mAPNP-Transistor
≤ 200 mALight- or dark-on
≤ 2.5 VPotentiometer 270°
LED, red light660 nm
LED yellow
2.5 ms200 Hz
M12×70 mmM12 connector, 4-pin
Nickel plated brassPMMA30 g
IP 67yesyes
–15...+55 °C5 kLux
PX1
288
42
70
M12x1
17
10.5 LEDns
2.1.10
Retroreflective with polarizing filter RangeThrough-beam Range
RetroreflectivePNP 1.5 m Polarizing filterPNP 1.5 m Polarizing filterThrough-beamPNP 5 m Receiver
5 m EmitterElectrical dataSupply voltage UB
RippleNo-load supply current I0 max.Switching outputOutput currentSwitching typeVoltage drop Ud at IeSettingsOptical dataEmitter, light typeWavelengthIndicatorsPower-on indicatorOutput function indicatorTime dataResponse timeSwitching frequency fMechanical dataDimensionsConnectionNo. of wires × cross-sectionHousing materialOptical surfaceWeightAmbient dataDegree of protection per IEC 60529Polarity reversal protectedShort circuit protectedAmbient temperature range Ta
Ambient light rejection
Retroreflective values referenced to R1 reflector.
Wiring diagrams, characteristics and accessories see page 2.1.12 and 2.1.13.
PhotoelectricSensors
BOS 12MRange 5 m
2.1.11
Photoelectricsensorsaccessoriespage 2.3.2 ...
2.1
2.3
0...5 m
BLE 12M-PA-1PD-S4-C
10...30 V DC10 %
≤ 20 mAPNP-Transistor
≤ 200 mALight- and dark-on
≤ 2.5 VPotentiometer 270°
LED, red light660 nm
LED yellow
1 ms500 Hz
M12×70 mmM12 connector, 4-pin
Nickel plated brassPMMA30 g
IP 67yesyes
–15...+55 °C5 kLux
PX1
288
42
70M12x1
17
10.5 LEDns
0...5 m
BLS 12M-XX-1RD-B0-L-03
10...30 V DC10 %
≤ 20 mA
LED, red light660 nm
LED green
M12×65 mm3 m cable, PVC
3×0.34 mm²Nickel plated brass
PMMA136 g
IP 67yesyes
–15...+55 °C5 kLux
0...5 m
BLE 12M-PA-1PD-B0-C-03
10...30 V DC10 %
≤ 20 mAPNP-Transistor
≤ 200 mALight- and dark-on
≤ 2.5 VPotentiometer 270°
LED, red light660 nm
LED yellow
1 ms500 Hz
M12×65 mm3 m cable, PVC
3×0.34 mm²Nickel plated brass
PMMA136 g
IP 67yesyes
–15...+55 °C5 kLux
0...5 m
BLS 12M-XX-1RD-S4-L
10...30 V DC10 %
≤ 20 mA
LED, red light660 nm
LED green
M12×70 mmM12 connector, 4-pin
Nickel plated brassPMMA30 g
IP 67yesyes
–15...+55 °C5 kLux
NS NPN NONO NPN NC
BOS 12M-_ _ -1YA-S4-C
Output
*Ordering example for NPN transistor:
M12 Metal
www.balluff.com
Connectors ...page 5.2 ...
5
PhotoelectricSensors
2.1.12
BOS 12MFunction diagramsConnection
Kodak gray card90 % Reflexion
BOS 12M-..-1YA-...
BOS 12M-..-1YB-...
BOS 12M-..-1PD-...
Emitter/Receiver
Diffuse BOS 12M-..-1YA/1YB/1PD-...
Through-beam BLE/BLS 12M-...
Retroreflective BOS 12M-..-1QA-...
ReflectorBOS R-1
Sensing distance measured with side approach of Kodak gray card.
Range measured using side approach with reflector.
For the through-beam the maximum possible offset between emitterand receiver is measured.
Wiring diagrams
PhotoelectricSensors
2.1.13
2.1
Photoelectricsensorsaccessoriespage 2.3.2 ...
2.3
Alignment aid
The additional functionindicator on the receiver ofthe through-beam sensorenables fast and simplealignment between emitterand receiver.
First attach the receiverand then the emitter. Assoon as the emitter islocated within the activerange of the receiver, thefunction indicator on thefront of the sensorextinguishes. This indicatesan optical connectionbetween emitter andreceiver. It is also wellvisible when the sensor isflush mounted.
Additional function indicatoras alignment aid
Receiving element
Function indicator
Potentiometer
Recommended accessoriesplease order separately
Cover nutBOS 12-SM-1
ConnectorBKS-_ 19/BKS-_ 20
Angled mirrorBOS 12-WS-1
Mounting cuffBOS 12.0-BS-1
Air shieldBOS 12-LT-1
ReflectorBOS R-9
Slit aperturesBOS 12-BL-1
ReflectorBOS R-1
BOS 12MAccessoriesM12 Metal
www.balluff.com
Connectors ...page 5.2 ...
5
PhotoelectricSensors
Laser through-beam Range
Through-beamEmitter High resolution 50 µm
Long range 30 mOutput sensor PNP
NPNElectrical dataSupply voltage UB
RippleNo-load supply current I0 max.Switching outputOutput currentSwitching typeVoltage drop Ud at IeSettingsOptical dataEmitter, light typeWavelengthLaser classLight spot diameterIndicatorsOutput function indicatorTime dataResponse timeSwitching frequency fMechanical dataConnectionNo. of wires × cross-sectionHousing materialOptical surfaceWeightAmbient dataDegree of protection per IEC 60529Polarity reversal protectedShort circuit protectedAmbient temperature range Ta
Ambient light rejection
2.1.14
BOS 12MLaser Through-beamConnection
Emitter Receiver ReceiverBOS 12M-XT... BOS 12M-PA... BOS 12M-NA...
The basis of the BOS 12laser through-beam sensoris its two different emitters.Emitter version LS11 isfor small parts detection andoffers a resolution of 50 µmat the focal point of 500 mm.The LS12 version is notfocused and is used for longranges up to 30 m.The receivers can be PNP orNPN, and any emitter can becombined with any receiver.
Wiring diagrams
Emitter Receiver ReceiverBOS 12M-XT... BOS 12M-PA... BOS 12M-NA...
Laser Class 1
Ob
ject
siz
e (m
m)
Ob
ject
siz
e (m
m)
Ob
ject
siz
e (m
m)
Small parts detectionBOS 12M-XT-LS11-..
BOS 12M-XT-LS12-..
BOS 12M-XT-LS12-..
Object distance from emitter (m)
Object distance from emitter (m)
Object distance from emitter (m)
Detection at a distance of3 m between emitter andreceiver.
Detection at a distanceof 30 m between emitter andreceiver.
Detection at a distanceof 6 m between emitter andreceiver.
All sensors are Laser Class 1and are available asconnector or cable style.
PhotoelectricSensors
2.1.15
2.1
Photoelectricsensorsaccessoriespage 2.3.2 ...
2.3
www.balluff.com
Connectors ...page 5.2 ...
5
BOS 12M-PA-LE10-S4BOS 12M-NA-LE10-S4
10...30 V DC10 %
≤ 15 mAPNP- or NPN-Transistor
≤ 200 mALight-/dark-on (complementary)
≤ 2.5 VPotentiometer 270°
LED yellow
0.5 ms1 kHz
M12 connector, 4-pin
Nickel plated brassPMMA30 g
IP 67yesyes
–10...+50 °CEN 60947-5-2
0...3 m/0...30 m
BOS 12M-XT-LS11-S4BOS 12M-XT-LS12-S4
10...30 V DC10 %
≤ 10 mA
Laser, red light655 nm
1
M12 connector, 4-pin
Nickel plated brassGlass30 g
IP 67yesyes
–10...+50 °CEN 60947-5-2
M12 MetalLaser
BOS 12M-PA-LE10-03BOS 12M-NA-LE10-03
10...30 V DC10 %
≤ 15 mAPNP- or NPN-Transistor
≤ 200 mALight-/dark-on (complementary)
≤ 2.5 VPotentiometer 270°
LED yellow
0.5 ms1 kHz
3 m cable, PVC4×0.34 mm²
Nickel plated brassPMMA140 g
IP 67yesyes
–10...+50 °CEN 60947-5-2
0...3 m/0...30 m
BOS 12M-XT-LS11-03BOS 12M-XT-LS12-03
10...30 V DC10 %
≤ 10 mA
Laser, red light655 nm
1
3 m cable, PVC3×0.34 mm²
Nickel plated brassGlass140 g
IP 67yesyes
–10...+50 °CEN 60947-5-2
BOS 12MLaser Through-beamRange 3 m, 30 m
ClampBOS 12.0-BS-1
ConnectorBKS-_ 19/BKS-_ 20
Recommended accessoriesplease order separately
PhotoelectricSensors
Adjusting unitBMS AD-M-002-D12/D12