sem vii and viii mumbai university syllabus
TRANSCRIPT
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
1/48
BE, VII-VIII, E&TC Engineering wef 2010-111
UNIVERSITY OF MUMBAI
SCHEME OF INSTRUCTION AND EVALUATION (R2007)Programme: B.E. Electronics and Telecommunication Engineering,
Scheme for Semester VII
Sr.No
Subjects
No. of Periods per week(60 minutes each)
Durationof
Theorypapers(Hours)
Marks
Lecture
Practi-cal
Tuto-rial
Theory Term-work Oral Total
1. MobileCommunication Systems
4 2 - 3 100 25 25 150
2. Fundamentalsof MicrowaveEngineering
4 2 - 3 100 25 25 150
3 ComputerCommunication Network
4 2 - 3 100 25 25 150
4 Discrete TimeSignalProcessing
4 2 3 100 25 25 150
5. Project stage I - - 4 - - 25 25 50
6. Elective-VIISem
4 2 - 3 100 25 25 150
Total. 20 10 4 - 500 150 150 800SCHEME FOR OFFERING ELECTIVE TO STUDENTS (Any ONE): BE, VII SemesterSEM VII: SEM VII: SEM VII: SEM VII:1.DATA COMPRESSION ANDENCRYPTION
2.INTRODUCTIONTO VLSI DESIGN
3.SPEECHPROCESSING
4.ELECTRONICPRODUCT DESIGN
Scheme forSemester VIII
Sr.No Subjects
No. of Periods per week(60 minutes each) Duration
ofTheorypapers(Hours)
Marks
Lecture
Practi-cal
Tuto-rial
Theory Term-work Oral Total
1. AdvanceMicrowaveEngineering
4 2 - 3 100 25 25 150
2. Optical FibreCommunication
4 2 - 3 100 25 25 150
3 WirelessNetwork
4 2 - 3 100 25 25 150
4. Project stage-II - - 8 - - 50 100 1505. Elective-VIII
Sem4 2 - 3 100 25 25 150
Total. 16 8 8 - 400 150 200 750SCHEME FOR OFFERING ELECTIVE TO STUDENTS (Any ONE): BE, VIII Semester
SEM VIII: SEM VIII: SEM VIII: SEM VIII:1. IMAGE PROCESSING 2. SATELLITE
COMMUNICATION3. TELECOM NETWORKMANAGEMENT
4. MICROWAVEINTEGRATEDCIRCUITS
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
2/48
BE, VII-VIII, E&TC Engineering wef 2010-112
University of Mumbai
CLASS: B.E. (Electronics & TelecommunicationEngineering)
Semester - VII
SUBJECT: Mobile Communication SystemsPeriods per week(Each of 60 min.)
Lecture 4Practical 2Tutorial -
Hours MarksEvaluation System Theory Examination 3 100
Practical examination - -Oral Examination - 25
Term Work - 25Total 150
Module Contents HoursObjective To study the concept of cellular system, GSM
& CDMA mobile communication.-
1 Introduction1] Introduction to wire1ess communication
systems2] The cellular concept:
Frequency reuse, channel assignmentstrategies, handoff strategies, interference and
system capacity, trunking and grade of service,improving the capacity of cellular systems.
12hrs
2 Mobile radio propagation:Large scale path lossReflection, ground reflection model (2 ray
model), diffraction, practical link budget designusing path loss models.
Small scale fading and multi-pathSmall-scale multipath propagation, parameter ofmulti-path channels, types of small scale fading,Rayleigh and Ricean distribution, diversity,
RAKE Receiver.
8hrs
3 Multiple access Technique in WirelessCommunicationsFrequency Division Multiple access, TimeDivision Multiple access, Spread SpectrumMultiple access, Space Division Multiple access.
4hrs
4 GSMGSM Network architecture, signaling protocol
10hrs
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
3/48
BE, VII-VIII, E&TC Engineering wef 2010-113
architecture, identifiers, channels, Framestructure, speech coding, authentication andsecurity, call procedure, handoff procedure,services and features.Mobile data networks
Data oriented CDPD network, GPRS and higherdata rates, SMS in GSM.
5 CDMA digital cellular standard (1S-95):Frequency and channel specifications of IS-95,forward and reverse CDMA channel, packet andframe formats, mobility and radio resourcemanagement.
8 hrs
6 IMT-2000Forward and reverse channels in W-CDMA andCDMA2000, Hand off and Power control in 3Gsystem.
6hrs
Theory Examination:1. Question paper will comprise of total 7 questions, each of 20 marks.2. Only 5 questions need to be solved.3. Questions will be analytical.4. Question number 1 will be compulsory and cover all modules.5. Remaining questions will be mixed in nature. (e.g. - Suppose Q.2 has
part (a) from, module 3 then part (b) will be from any module other thanmodule 3.)
6. In the question paper, weightage of each module will be proportional tonumber of respective lecture hours as mentioned in the syllabus.
Oral Examination:
Oral examination will be conducted to test the overall understanding ofthe subject based on the syllabus .
Term work:Term work shall consist of minimum Six experiments & tutorials and a writtentest.The distribution of marks for term work shall be as follows,Laboratory work (Experiments and Journal) : 15 marks.Test (at least one) : 10 marks.The final certification and acceptance of term-work ensures the satisfactoryperformance of laboratory work and minimum passing in the term-work.
Practical listList of Experiments or similar:
1. Simulation program to observe the change in parameters due to change inchannel2. Simulation program using freely downloadable software eg. J2ME, Python3. Assignments based on Syllabus
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
4/48
BE, VII-VIII, E&TC Engineering wef 2010-114
Recommended Books:Text:
1. Wireless Communications - Theodore S. Rappaport, Prentice Hall of India,PTR publication
2. Principles of Wireless Networks-Kaveh Pahlavan, Prashant
Krishnamurthy, PHIReference1. Wireless communication- Singhal_TMH
University of Mumbai
CLASS: B.E. (Electronics & TelecommunicationEngineering)
Semester - VII
SUBJECT: Fundamentals of Microwave EngineeringPeriods per week(Each of 60 min.)
Lecture 4Practical 2
Tutorial -Hours Marks
Evaluation System Theory Examination 3 100Practical examination - -
Oral Examination - 25Term Work - 25
Total 150
Module Contents Hours
Objective This course will help students understand the
essentials of microwave design and engineering,besides, active and passive microwave devicesand microwave tubes.
-
1 BASIC CONCEPTSIntroduction. Maxwells Equations. ConstitutiveRelations. Static Fields. Wave Equation. Energyand Power. Boundary Conditions. Plane Waves.Dielectric Interface. Reflection from a ConductingPlane. Potential Theory. Solutions for VectorPotential. Lorentz Reciprocity Theorem.
4hrs
2 TRANSMISSION LINES THEORY AND
WAVEGUIDESThe Quarter-Wave Transformer. Generator andLoad Mismatches. Impedance Matching withReactive Elements. Single-Stub, Double-Stub,and Triple-Stub Matching. Lossy TransmissionLines.TEM, TE, TM Waves. Parallel-Plate,Rectangular, Circular Waveguides. Coaxial Line.
10hrs
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
5/48
BE, VII-VIII, E&TC Engineering wef 2010-115
Surface Waves on a Grounded Dielectric Slab.Coupled Strip Lines. Microstrip TransmissionLine. Wave Velocity and Dispersion.
3 ACTIVE AND PASSIVE MICROWAVE
DEVICESDiodes. Microwave Transistors. HeterojunctionBipolar Transistor. Microwave FET. Noise inMicrowave Circuits. Dynamic Range andIntermodulation Distortion. RF Diode. RFTransistor.Terminations. Attenuators. Phase Shifters.Directional Couplers. Hybrid Junctions. PowerDividers. Microwave Propagation in Ferrites.Faraday Rotation. Microwave DevicesEmploying Faraday Rotation. Circulators.
8hrs
4 MICROWAVE SEMICINDUCTOR DEVICESPoint Contact Diodes. Schottky Barrier Diodes.Spin Diodes. PIN Diodes. Varactor Diodes.Tunnel Diodes. Gunn Devices. IMPATT Diode.Parametric Devices. Detectors and Mixers.
6hrs
5 MICROWAVE FILTERSIntroduction. Periodic Structures. Filter DesignImage-Parameter Method, Insertion-LossMethod. Filter Transformations. FilterImplementation. Low Pass-Filer Design. CoupledLine Filters. Filters using Coupled Resonators.
6hrs
6 MICROWAVE TUBESIntroduction. Electron Beams with DC conditions:Ion-Neutralized Beam, Beam with AxiallyConfined Flow. Brillouin Flow. Space-ChargeWaves on Beams with Confined Flow. Space-Charge Waves on Unfocused Beams. AC PowerRelations. Velocity Modulation. Two-CavityKlystron. Excitation of Cylindrical Cavity. ReflexKlystron. Magnetron. O-Type and M-TypeTraveling Wave Tubes. Gyrotrons. OtherMicrowave Tubes.
MICROWAVE MEASUREMENTSVSWR. Frequency. Power. Noise. Q-Factor.Impedance. Attenuation. Dielectric Constant.Antenna Gain.
8hrs
2hrs
Theory Examination:1. Question paper will comprise of total 7 questions, each of 20 marks.2. Only 5 questions need to be solved.
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
6/48
BE, VII-VIII, E&TC Engineering wef 2010-116
3. Questions will be analytical and design oriented.4. Question number 1 will be compulsory and cover all modules.5. Remaining questions will be mixed in nature. (e.g. - Suppose Q.2 has part
(a) from, module 3 then part (b) will be from any module other thanmodule 3.)
6. In the question paper, weightage of each module will be proportional tonumber of respective lecture hours as mentioned in the syllabus.
Oral Examination:Oral examination will be conducted to test the overall understanding ofthe subject based on the syllabus .
Term work:Term work shall consist of minimum six experiments and a written test.The distribution of marks for term work shall be as follows,Laboratory work (Experiments and Journal) : 15 marks.
Test (at least one) : 10 marks.The final certification and acceptance of term-work ensures the satisfactoryperformance of laboratory work and minimum passing in the term-work.
Practical list
SUGGESTED LIST OF EXPERIMENTS:
1. Measurement of attenuation by substitution method2. Measurement of impendence using slotted wave guide3. Measurement of scattering parameters4. Measurement of frequency using slotted wave guide.
5. Measurement of impedance using reflectometer6. Measurement of Wavelength using reflectometer7. Measurement of power8. Measurement of VSWR
Recommended Books:Text : 1. Pozar, Microwave Engineering, 3rdedi, WileyReference
1. Collin, Foundation of Microwave Engineering, 2ndedi, Wiley2. Microwave engineering passive circuits - Peter A. Rizzi PHI Publication3. Microwave Devices and circuits - Samuel Liao PHI Publication
4. Microwave, Gupta K.C., New Age International5. Microwave Engineering and Applications - O.P. Gandhi Pargamon Presspublication
6. Microwave Active Devices, Sisodia M.L., New Age International7. Basic Microwave Techniques and laboratory manual- M.L. Sisodia, G. S.
Raghuvans Wiley eastern Limited publication8. Electromagnetic Field theory fundamentals - Guru & Hisiroglu Thomson
Learning publication
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
7/48
BE, VII-VIII, E&TC Engineering wef 2010-117
University of Mumbai
CLASS: B.E. (Electronics & TelecommunicationEngineering)
Semester - VII
SUBJECT: Computer Communication Networks
Periods per week(Each of 60 min.)
Lecture 4Practical 2Tutorial -
Hours MarksEvaluation System Theory Examination 3 100
Practical examination - -Oral Examination - 25
Term Work - 25Total 150
Module Contents Hours
Objective Students will learn the concept of computernetworking. Various protocols involved inmodeling the network, the concept of LANdesigning and various routing techniqueswill be studied. TCP/IP, basic queuing theoryand delay analysis will be studied.
-
1 Communication networks and services:Network functions and network
topology, basics of message switching, packet
switching, circuit switching and cell switching..Application and layered architecturesthe OSI reference model, unified view of layers,protocols and services, overview of TCP/IParchitecture, TCP/IP protocol.
7hrs
2 Peer to peer protocols:Peer to peer protocols and service models,service models, end to end requirements andadaptation functions, end to end versus hop byhop. ARQ protocols, stop and wait ARQ, goback-N ARO, selective repeat ARO, transmission
efficiency of ARQ protocols, sliding windows flowcontrol, timing recovery for synchronousservices, reliable stream service, data linkcontrols, HDLC data link control, point to pointprotocol, statistical multiplexing.
7hrs
3 Local area networks:Multiple access communications,
local area networks (LAN) structure, the medium
9hrs
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
8/48
BE, VII-VIII, E&TC Engineering wef 2010-118
access control sub layer, the logical link controllayer, random access, ALOHA, slotted ALOHA,CSMA CSMACD, scheduling approaches tomedium access control, reservation systems,polling, token passing rings, comparison of
random access and scheduling medium accesscontrols, IEEE 802.3 standards for 10M bps and1000 Mbps LANs, repeaters and hubs, LANbridges, transparent bridges, source routingbridges, mixes media bridges, LAN switches,spanning tree algorithm.
4 Packet switching networks:Network services and internal
network operation, packet network topology,connectionless packet switching, virtual circuitpacket switching, routing in packet networks,
routing algorithm classification, routing tables;hierarchical routing, link state versus distancevector routing, shortest path algorithms, theBellman-ford algorithm, Dijkstra's algorithm,other routing approaches.
9hrs
5 TCP/IP:The Internet Protocol (IP), IP packet, IP
addressing, subnet mask, classless inter domainrouting (CIDR), address resolution, reverseaddress resolution, IP fragmentation andreassembly, ICMP, User Date gram Protocol
(UDP), Transmission Control Protocol (TCP),TCP Reliable stream service, TCP operation,TCP protocol, Dynamic Host ConfigurationProtocol (DHCP), mobile IP IPv6, internet routingprotocols, routing information protocols, openshortest path first protocol, border gatewayprotocol, multicast routing, reverse pathbroadcasting, internet group managementprotocol, reverse path multicasting, distancevector multicast routing protocol.
10hrs
6 Delay and loss Performance in network
Delay analysisArrival rates and traffic load definition LintelsformulaBasic queuing models :Arrival processes, service time queuing systemclarification M/M/I queue and basic multiplexermodel M/M/I state probabilities and notion ofstability, effect of scale on performance, average
8hrs
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
9/48
BE, VII-VIII, E&TC Engineering wef 2010-119
placket delay Via network. The M/G/I model,service time variability and delay M/M/I system.Erlang formulas and M/M/c/e system priorityqueuing system.
Theory Examination:
1. Question paper will comprise of total 7 questions, each of 20 marks.2. Only 5 questions need to be solved.3. Question number 1 will be compulsory and cover all modules.4. Remaining questions will be mixed in nature. (e.g. - Suppose Q.2 has part
(a) from, module 3 then part (b) will be from any module other thanmodule 3.)
5. In the question paper, weightage of each module will be proportional tonumber of respective lecture hours as mentioned in the syllabus.
Oral Examination:Oral examination will be conducted to test the overall understanding ofthe subject based on the syllabus .
Term work:Term work shall consist of minimum five experiments & 3 tutorials and a writtentest.The distribution of marks for term work shall be as follows,Laboratory work (Experiments and Journal) : 15 marks.Test (at least one) : 10 marks.The final certification and acceptance of term-work ensures the satisfactoryperformance of laboratory work and minimum passing in the term-work.
Practical list
Suggested LIST OF EXPERIMENTS
1. Study of the network components2. Osi layer implementation3. Study of routing technique4. Implementation of dikshtras alogorothim for shortest path routing5. Study of lan wan designing6. To implement header checksum of tcp/ip7. Study of etheral software
Recommended Books:1. Communication networks by Leon Garcia and Indra Widjaja 2nd
edition2. TCP/IP protocol suite, 2ndedition, Behrouz A Forouzan3. Advanced Computer Networks, D.Ambawade, Dreamtech
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
10/48
BE, VII-VIII, E&TC Engineering wef 2010-1110
University of Mumbai
CLASS: B.E. (Electronics & TelecommunicationEngineering)
Semester - VII
SUBJECT: Discrete Time Signal Processing
Periods per week(Each of 60 min.)
Lecture 4Practical 2Tutorial -
Hours MarksEvaluation System Theory Examination 3 100
Practical examination - -Oral Examination 25
Term Work 25Total 150
Module Contents Hours
Objective To develop a thorough understanding of thecentral elements of discrete Time signalprocessing theory and the ability to applythis theory to real-world signal processingapplications.
-
1 Transform analysis of LTI systemFrequency response of LTI systems, PhaseDistortion and delay, all pass systems, minimum,maximum and mixed phase systems, Linear
phase filters, causal generalized linear phasesystems (pole zero plots), symmetric andantisymmetric filters, Low pass, high pass andBand pass filters, digital resonators, comb filter,notch filter, all pass filters, digital sinusoidaloscillators.DFT and its Properties, Linear filtering based onDFT, Frequency analysis of signals using DFT,Filtering of Long data sequences.
4 hrs
6 hrs
2 Computation of DFTRadix-2, Radix-4 Fast Fourier Transform, DIT
FFT, DIF FFT, IFFT, Split radix FFT Linearfiltering and correlation using FFT, GoertzelAlgorithm, Chirp-Z Transform
11 hrs
3 Finite Impulse Response (FIR) Filter Design.FIR Filter Design- Window method, Frequencysampling method, Optimum equiripple Linearphase FIR, FIR Differentiator, Finite word lengtheffect in FIR digital filters. Frequency
6 hrs
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
11/48
BE, VII-VIII, E&TC Engineering wef 2010-1111
Transformation. Realization Structures for FIRfilters- Direct form structure, Cascade,Frequency Sampling Structure, Lattice Ladderstructure. Structures for Linear phase FIR filters.
4 Infinite Impulse Response Filter Design
Design of IIR Filters- Impulse invariant method,Matched Z- Transform Method, BilinearTransformation method. Butterworth filter, Finitewordlength effects in IIR Filters. FrequencyTransformation- Low pass to High pass, BandPass and band reject filters. RealizationStructures for IIR Filters Direct form structures,Cascade and parallel realization structures forhigher order structures, Lattice Ladder structure.Application examples in Telecommunication-Touch tone generation and reception for digital
Telephones, Digital telephony: Dual tonemultifrequency detection using Goertzelalgorithm, Clock recovery for datacommunication
8 hrs
5 Multi rate Signal ProcessingSampling rate reduction: decimation by integerfactors, Sampling rate increase: interpolation byinteger factors, sampling rate conversion by noninteger factors, Multistage approach to samplingrate conversion, Polyphase implementation ofinterpolators. Sample rate conversion using poly
phase filter structure. Applications of Multiratesignal Processing- Interfacing of Digital Systemswith different Sampling rates, Filter Banks,Subband coding of speech signals.
10 hrs
6 Telecommunications applications of DTSPDigital Cellular mobile telephony, Set top box fordigital television reception, Adaptive televisionecho cancellation. Applications to Radar
3hrs
Theory Examination:1. Question paper will comprise of total 7 questions, each of 20 marks.2. Only 5 questions need to be solved.
3. Questions will be analytical and design oriented.4. Question number 1 will be compulsory and cover all modules.5. Remaining questions will be mixed in nature. (e.g. - Suppose Q.2 has part
(a) from, module 3 then part (b) will be from any module other than module3.)
6. In the question paper, weightage of each module will be proportional tonumber of respective lecture hours as mentioned in the syllabus.
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
12/48
BE, VII-VIII, E&TC Engineering wef 2010-1112
Oral Examination:Oral examination will be conducted to test the overall understanding of thesubject based on the syllabus .Term work:Term work shall consist of minimum six experiments & 2 tutorials and a written
test.The distribution of marks for term work shall be as follows,Laboratory work (Experiments and Journal) : 15 marks.Test (at least one) : 10 marks.The final certification and acceptance of term-work ensures the satisfactoryperformance of laboratory work and minimum passing in the term-work.
Suggested List of Simulations (MATLAB or C/C++ or Labview)1) Magnitude and Phase response of a system2) Spectral Analysis using DFT3) Fast Fourier Transform
4) IIR Filter Design5) Realization of IIR Filters6) FIR Filter Design using Window technique7) FIR filter design using Frequency sampling structure8) Decimator & Interpolator9) Decimation by polyphase decomposition10) Applications of signal processing operation to practical one dimensionalsignal e.g. speech signal, ECG signal, music signal etc.
Recommended Books:Text
1) Discrete Time signal Processing by Alan V. Oppenheim, RonaldSchafer, Pearson Education
2) Digital Signal Processing, Principles, algorithms and applications - J.Proakis, D. G. Manolakis, D. Sharma, Pearson Education
3) Shaum Outlines, Monson Hayes, Adapted by Subrata Bhattacharya,Tata McGraw Hill
4) Digital Signal Processing , A Practical Approach, Emmanuel C.Ifeachor, Barrie W. Jervis, Pearson Education
Reference1) Discrete Time Signal Processing by Salivahnan, A. Vallavaraj, C.
Gnanapriya, Second Edition, Mc Graw Hill2) Digital Signal Processing, 2ndedi, Shailaja Apte, Wiley India3) Fundamentals of Digital Signal Processing using MATLAB- Robert
Schilling, Sandra Harris, Cengage Learning4) Digital Signal Processing, S. K. Mitra,Tata McGraw Hill Publication
20015) Digital Signal Processing by Chen, Oxford University Press6) A Practical Approach to Digital Signal Processing, Padmanabhan K.,
New Age International
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
13/48
BE, VII-VIII, E&TC Engineering wef 2010-1113
7) Digital signal processing :system analysis and design .Diniz ,da sillva,Netto Cambridge university press
8) Digital Signal Processing, Ashok Ambardar,Cengage LearningPublication
B. E. Electronics and Telecommunication Engineeringsemester VII
Subject Project - IProject Hour: 4 Hrs/week Term work: 25 marks
Oral Exam. : 25 marksTotal marks=50 marks
Note: One faculty will not guide more than 3 projects in a semester. For everygroup allotted to faculty the load is considered as 1 Hour per group (Internal/External Project) per week, be specified in time table of the faculty. Each groupwill not have more than 4 students.
Rationale: Project allows the student to work independently to put theknowledge of Electronics and Telecommunication engineering theoryinto practice.
Detailed description
Purpose:
Engineering Project is a technical mandatory course.
Project is the conclusive effort of independent work in the span of twosemesters. The project course challenges the student to explore widerange of topics and opportunities for innovation.
Responsibility is placed on the student to apply learning from variousengineering courses and to seek out and make the best use of theavailable resources in terms of faculty, staff, library, laboratory, etc.
This course is an opportunity for students to further develop themanagerial skills while working in a team, creative skills by developingnovel engineering solutions and communication skills presenting their endapplication, all necessary to be a successful engineer.
Introducing the concept of professional literature and Gaining experiencein writing a technical document.
Enhancing employability through the evidence of independent work.
The students of Electronics and Telecommunication Engineering are expected tobuild a project by designing an engineering solution to the any of the following:
Improvise existing technology
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
14/48
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
15/48
BE, VII-VIII, E&TC Engineering wef 2010-1115
made using the published literature as well as textbooks and studentreports from previous projects if available.
o Proper Planning: Students must define the project goals and mustorganize a logical sequence of steps to achieve these goals. This will varydepending on the project, ability to procure materials, availability of
equipment, etc.o Regular Meetings: Students must meet regularly (weekly-4Hrs in VII
Semester and 8 Hrs in VIII Semester) with the project guide.o Professional Record Keeping: Proper records are essential and are
typically kept in a log book with all details of activity noted. Be sure to usestandard nomenclature and work in the SI system of units. (Log-book willcontain in table format: Date/ Activity/ outcome/ comment on outcome/Resources utilized/ Next meeting date, Target/ Guides Remark)
Term work
Term work should consist of the above mentioned activities which shall be
evaluated and shall carry a weightage of 25 marks.Oral ExaminationThe oral examination shall be conducted on the basis of presentation given bythe students and shall carry a weightage of 25 marks.
University of Mumbai
CLASS: B.E. (Electronics & TelecommunicationEngineering)
Semester VIIElective
SUBJECT: Data Compression and EncryptionPeriods per week(Each of 60 min.)
Lecture 4Practical 2Tutorial -
Hours MarksEvaluation System Theory Examination 3 100
Practical examination - -Oral Examination - 25
Term Work - 25Total 150
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
16/48
BE, VII-VIII, E&TC Engineering wef 2010-1116
Module Contents Hours
Objective The objective of this course is to introduce tothe students the fundamentals of datacompression, data encryption and datasecurity
-
1 TEXT COMPRESSIONShannon Fano Coding, Huffmann coding,Arithmetic coding and dictionary techniques-LZW, family algorithms. Entropy measures ofperformance and Quality measures.
6hrs
2 AUDIO COMPRESSIONDigital Audio, Lossy sound compression, M-lawand A-law companding, DPCM and ADPCMaudio compression, MPEG audio standard,frequency domain coding, format of compresseddata. 8hrs
3 IMAGE AND VIDEO COMPRESSIONLoss less techniques of image compression,gray codes, Two dimensional image transforms,JPEG, JPEG 2000, Predictive Techniques PCMand DPCM. Video compression and MPEGindustry standard.
10hrs
4 CONVENTIONAL ENCRYPTIONIntroduction, Types of attacks, Steganography,Data Encryption Standard, Block CipherPrinciple, S-box design, triple DES with two threekeys, introduction to international data encryptionalgorithm and key distribution.
8hrs
5 PUBLIC KEY ENCRYPTION AND NUMBERTHEORYEulers theorems, Chinese remainder theorem,Principles of public key cryptography, RSAalgorithm, Diffie-Hellman Key Exchange. Ellipticcurve cryptology, message authentification andHash functions, Hash and Mac algorithms,Digital signatures.
8hrs
6 SYSTEM SECURITY & CASE STUDIESIntruders, Viruses, Worms, firewall design,antivirus techniques, digital Immune systems,Certificate based & Biometric authentication,Secure Electronic Payment System.
8hrs
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
17/48
BE, VII-VIII, E&TC Engineering wef 2010-1117
Theory Examination:1. Question paper will comprise of total 7 questions, each of 20
marks.2. Only 5 questions need to be solved.3. Question number 1 will be compulsory and cover all modules.
4. Remaining questions will be mixed in nature. (e.g. - Suppose Q.2has part (a) from, module 3 then part (b) will be from any moduleother than module 3.)
5. In the question paper, weightage of each module will beproportional to number of respective lecture hours as mentioned inthe syllabus.
Oral Examination:Oral examination will be conducted to test the overall understanding ofthe subject based on the syllabus .
Term work:
Term work shall consist of minimum five experiments & 3 tutorials and a writtentest.The distribution of marks for term work shall be as follows,Laboratory work (Experiments and Journal) : 15 marks.Test (at least one) : 10 marks.The final certification and acceptance of term-work ensures the satisfactoryperformance of laboratory work and minimum passing in the term-work.
Recommended Books:Text Books
1. Data Compression David Salomon , Springer Publication, 4thEdition.
2. Introduction to Data Compression Khalid Sayood, Morgan Kaufmann
Series, 3rdEdition
3. Cryptography and Network Security William Stallings, Pearson Education
Asia Publication, 5thEdition.
4. Cryptography and Network Security Behrouz Forouzan, McGraw-Hill, 1st
Edition.
Reference Books:
1.The Data Compression Book Mark Nelson, BPB publication, 2ndEdition
2. Applied Cryptography Bruce Schnerer, John Willey & Sons Inc. Publication,
2ndEdition
3. Cryptography & Network Security Atul Kahate, Tata McGraw Hill, 2ndEdition
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
18/48
BE, VII-VIII, E&TC Engineering wef 2010-1118
University of Mumbai
CLASS: B.E. (Electronics & TelecommunicationEngineering)
Semester VIIElective
SUBJECT: Introduction to VLSI Design
Periods per week(Each of 60 min.)
Lecture 4Practical 2Tutorial -
Hours MarksEvaluation System Theory Examination 3 100
Practical examination - -Oral Examination - 25
Term Work - 25Total 150
Module Contents Hours
Objective The objective of the course is to introducethe students with basics concepts of VLSIdevices, their fabrication and design of VLSIbuilding blocks using VLSI CAD tools.
-
Pre-requisite Students opting for this course are expectedto have understanding Analog and DigitalIntegrated Circuits
1 Overview of VLSI design flow, representation ofCMOS logic gates,Physics of semiconductors. MOSFET transistors.
Threshold voltage, I-V characteristics, MOSFETparasitic, Modeling of MOS transistors in SPICE.
6hrs
2 DC and transient response of CMOS Inverter,Design of CMOS inverter for given performancespecifications. (Noise Margins, delay, powerdissipation and area). Design of CMOS logicgate using Transmission Gates. (TG)Introduction to various processes involved in thefabrication of CMOS Integrated Circuits likeoxidation, diffusing, ion implantation,photolithography, etching, metallization and etc.
(Only qualitative treatment is expected).Fabrication of MOSFET and CMOS Inverterusing above processes. Layout and Stickdiagrams. Layout design rules, Layout of Inverterand TG.
12hrs
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
19/48
BE, VII-VIII, E&TC Engineering wef 2010-1119
3 Design of Arithmetic CMOS circuits like bit addercircuits, ripple carry adders, carry look aheadadders, high speed adders and multipliers.Introduction to Charge Storage Nodes, DynamicLogic , Domino Logic , NORA Logic
Design of Memory elements like SRAM, DRAM,ROM and Programmable logic arrays.
12hrs
4 Large scale physical design, InterconnectedDelay Modeling, Crosstalk, InterconnectedScaling, Floor planning & Routing, I/P & O/PCircuit, Power dissipation and consumption, Lowpower Design considerations.
6hrs
5 Clocked flip-flop, CMOS clock styles, Pipelinedsystems, Clock generation and distribution,System design considerations.
6hrs
6 System design using Hardware description
language (HDL) like VHDL or verilog.
6hrs
Theory Examination:1. Question paper will comprise of total 7 questions, each of 20
marks.2. Only 5 questions need to be solved.3. Questions will be analytical and design oriented.4. Question number 1 will be compulsory and cover all modules.5. Remaining questions will be mixed in nature. (e.g. - Suppose Q.2
has part (a) from, module 3 then part (b) will be from any moduleother than module 3.)
6. In the question paper, weightage of each module will be
proportional to number of respective lecture hours as mentioned inthe syllabus.
Oral Examination:Oral examination will be conducted to test the overall understanding of thesubject based on the syllabus .
Term work:Term work shall consist of minimum six experiments and a written test.The distribution of marks for term work shall be as follows,Laboratory work (Experiments and Journal) : 15 marks.
Test (at least one) : 10 marks.The final certification and acceptance of term-work ensures the satisfactoryperformance of laboratory work and minimum passing in the term-work.
Practical listTentative Practical list is given below, however concern teacher is free todesign and conduct any other experiments based on the syllabus.
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
20/48
BE, VII-VIII, E&TC Engineering wef 2010-1120
1 .Timing and functional analysis of a 1-bit full adder.2 . Design and simulation of transistor level CMOS circuits.3. Design and simulation of a TG based 1-bit full adder.4. Physical layout of inverter and TG.5. Physical layout of a TG based 1-bit full adder.
6. Physical layout of a D flip-flop.7. Design of adder/multiplier using VHDL/Verilog8. Design of Sequential Circuit using VHDL/Verilog
Recommended Books:
Text1. P. Uyemura, Introduction to VLSI Circuits and Systems, John Wiley & Sons,
2002.Reference
1. CMOS digital Integrated Circuits Analysis and Design, Sung-Mo Kang, YusufLeblebici, McGraw hill international Editions, Electrical engineering series2. Digital integrated Circuits A design perspective, Jan M abaey, PHI Pvt Ltd(Prentice Hall of India Pvt Ltd)3. Principles of CMOS VLSI Design, Neil H.E Weste, Kamran Eshragain4. CMOS ckt design, layout and simulation, R. Jacbob Baker, Wiley Publication5.Fundamentals of Modern VLSI Devices by Yuan Taur, Cambridge UniversityPress6. VLSI Design and Technology, Bose D.N., New Age International
University of Mumbai
CLASS: B.E. (Electronics & TelecommunicationEngineering)
Semester VIIElective
SUBJECT: SPEECH PROCESSINGPeriods per week(Each of 60 min.)
Lecture 4Practical 2Tutorial -
Hours MarksEvaluation System Theory Examination 3 100
Practical examination - -Oral Examination - 25
Term Work - 25Total 150
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
21/48
BE, VII-VIII, E&TC Engineering wef 2010-1121
Module Contents Hours
Objective To introduce the characteristics of Speechsignals and the related time and frequencydomain methods for speech analysis
-
1 NATURE OF SPEECH SIGNALS Speechproduction mechanism, Classification of speech,sounds, nature of speech signal, models ofspeech production. Speech signal processing:purpose of speech processing, digital models forspeech signal, Digital processing of speechsignals.
9hrs
2 TIME DOMAIN METHODS FOR SPEECHPROCESSING
Time domain parameters of speech, methods forextracting the parameters, Zero crossings, Autocorrelation function, pitch estimation. 9hrs
3 FREQUENCY DOMAIN METHODS FORSPEECH PROCESSING
Short time Fourier analysis, filter bank analysis,spectrographic analysis, Format extraction, pitchextraction, Analysis - synthesis systems.
9hrs
4 LINEAR PREDICTIVE CODING OF SPEECH
Formulation of linear prediction problem in timedomain, solution of normal equations,Interpretation of linear prediction in autocorrelation and spectral domains.
9hrs
5 HOMOMORPHIC SPEECH ANALYSIS
Central analysis of speech, format and pitchestimation, Applications of speech processing -Speech recognition, Speech synthesis andspeaker verification.
9hrs
Theory Examination:1. Question paper will comprise of total 7 questions, each of 20
marks.2. Only 5 questions need to be solved.3. Questions will be analytical.4. Question number 1 will be compulsory and cover all modules.
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
22/48
BE, VII-VIII, E&TC Engineering wef 2010-1122
5. Remaining questions will be mixed in nature. (e.g. - Suppose Q.2has part (a) from, module 3 then part (b) will be from any moduleother than module 3.)
6. In the question paper, weightage of each module will beproportional to number of respective lecture hours as mentioned in
the syllabus.Oral Examination:Oral examination will be conducted to test the overall understanding ofthe subject based on the syllabus .
Term work:Term work shall consist of minimum five experiments & 3 tutorials and a writtentest.The distribution of marks for term work shall be as follows,Laboratory work (Experiments and Journal) : 15 marks.Test (at least one) : 10 marks.
The final certification and acceptance of term-work ensures the satisfactoryperformance of laboratory work and minimum passing in the term-work.
Recommended Books:
TEXTBOOK :
Rabiner L. R. and Schafer R.E., Digital processing of speech signals, PrenticeHall, 1978.
References
1. Owens, F.J., Signal Processing of Speech, Macmillan, 1993.2. Deller J.R. Proakis J.G. and Hanson J.H, Discrete-Time Processing ofSpeech Signals, Macmillan.
3.Applied speech and Audio Processing with MATLAB examples, IanMcLoughlin Cambridge University Press 2009.4. Digital Speech: Coding for Low Bit Rate Communication Systems, 2nd EditionA. M. Kondoz , Wiley
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
23/48
BE, VII-VIII, E&TC Engineering wef 2010-1123
University of Mumbai
CLASS: B.E. (Electronics & TelecommunicationEngineering)
Semester VIIElective
SUBJECT: ELECTRONIC PRODUCT DESIGN
Periods per week(Each of 60 min.)
Lecture 4Practical 2Tutorial -
Hours MarksEvaluation System Theory Examination 3 100
Practical examination - -Oral Examination - 25
Term Work - 25Total 150
Module Contents Hours
Objective To cover product design & developmentstages and total coverage of productassessment by introducing the basics ofreliability and quality of electronic productand then discusses the various modes andcauses of failure.
-
1 Product Design and developmentIntroduction, An overview of productdevelopment & product assessment, Pilot
production batch, Concept of availability,Screening test , Environmental effects onreliability, Redundancy, Failsafe system,Ergonomic & aesthetic design considerations,Packaging & storage
Estimating power supply requirement (Powersupply sizing), Power supply protection devices
Noise consideration of a typical system, Noisein electronic circuit, Measurement of noise
Grounding, Shielding and Guarding
Enclosure sizing & supply requirements &materials for enclosure and tests carried out onenclosure
Thermal management and its types
12hrs
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
24/48
BE, VII-VIII, E&TC Engineering wef 2010-1124
2 PCB designingLayout, PCB sizes, Layout General rules ¶meters. Recommendations for decoupling &bypassing. Design rules for digital circuit PCB &analog circuit PCBs
Noise generation, Supply & ground conductors
Multilayer boards
Component assembly & testing of assembledPCB, Bare board testing. Component assemblytechniques
Automation & computers in PCB design,Computer aided design , Design automation
Soldering techniques, Solderability testing
Study of packages for discrete devices & ICs, ICreliability issues. Parasitic elements
Calculations of parasitic elements in high speedPCB. High speed PCB design and points to beconsidered for designing the high speed PCBs
Mounting in presence of vibration. SMDassemblies
Board layout check list. Tests for multilayer PCB
Cable
12hrs
3 Hardware design and testing methodsLogic analyzer, its architecture & operation andUse of logic analyzer
Spectrum analyzer
Network analyzer,
Oscilloscope , DSO trigger modes
Examples using MSO
Signal integrity issues
Use & limitations of different types of analysis
Monte Carlo analysis
6hrs
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
25/48
BE, VII-VIII, E&TC Engineering wef 2010-1125
4 Software design and testing methodsIntroduction
Phases of software design & Goals of softwaredesign
Methods of program flow representation
Structured program construct
Testing & debugging of program
Software design
Finite state machine
Decision to use assembly & / or high levellanguage for software development
Assembler
Compilers, Compilers design
Simulators, CPU Simulators
Emulators
6hrs
5 Product testingEnvironmental testing for product. Environmentaltest chambers & rooms. Tests carried out on theenclosures
Electromagnetic compatibility (EMC) with respectto compliance. Electromagnetic compatibility(EMC) testing . Conducted emission test (timedomain methods). Radiated emission test
Basics on standard used. Instrumentspecifications
6hrs
6 DocumentationPCB documentation- Specifying laminate grade,drilling details, PCB finish- Tin, solder, gold,
silver plating, hot air leveling, and bare boardtesting. Understanding advantages andlimitations of eachProduct documentation- bill of materials,Production test specification- a case study forreal circuit, Interconnection diagram- A casestudy., Front and rear panel diagrams forselected product
6hrs
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
26/48
BE, VII-VIII, E&TC Engineering wef 2010-1126
Manuals- Instruction or operating manual,Service and Maintenance manual, Fault findingtreeSoftware documentation practices- For Cprogrammes, Assembly programmes with
particular focus on development of programmeby several engineers simultaneously.
Theory Examination:1. Question paper will comprise of total 7 questions, each of 20
marks.2. Only 5 questions need to be solved.3. Questions will be analytical and design oriented.4. Question number 1 will be compulsory and cover all modules.5. Remaining questions will be mixed in nature. (e.g. - Suppose Q.2
has part (a) from, module 3 then part (b) will be from any moduleother than module 3.)
6. In the question paper, weightage of each module will beproportional to number of respective lecture hours as mentioned inthe syllabus.
Oral Examination:Oral examination will be conducted to test the overall understanding ofthe subject based on the syllabus .
Term work:Term work shall consist of minimum four experiments & 3 tutorials and a writtentest.The distribution of marks for term work shall be as follows,Laboratory work (Experiments and Journal) : 15 marks.
Test (at least one) : 10 marks.
The final certification and acceptance of term-work ensures the satisfactoryperformance of laboratory work and minimum passing in the term-work.
Recommended Books:Text
1. Electronic Product Design, R.G.Kaduskar, V.B.Baru, Wiley IndiaReference
1. Printed Circuit Board design and technology Walter C BosshartTata McGraw Hill-CEDT
2. Handbook of Printed Circuit manufacturing Raymond H. Clark(Van Nostrand Reinhold Company, New York)3. Electronic testing and fault diagnosis G.C. Loveday (Ah wheeler
Publication, India)4. Electronics Engineers reference book 5th Edition Edited by F.F. Mazda
Butterworths Publication Co., UK)5. Principles of Reliable Soldering Techniques, Sengupta R., New Age
International
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
27/48
BE, VII-VIII, E&TC Engineering wef 2010-1127
UNIVERSITY OF MUMBAI
SCHEME OF INSTRUCTION AND EVALUATION (R2007)Programme: B.E. Electronics and Telecommunication Engineering,
Scheme for Semester VII
Sr.No
Subjects
No. of Periods per week(60 minutes each)
Durationof
Theorypapers(Hours)
Marks
Lecture
Practi-cal
Tuto-rial
Theory Term-work Oral Total
1. MobileCommunication Systems
4 2 - 3 100 25 25 150
2. Fundamentalsof MicrowaveEngineering
4 2 - 3 100 25 25 150
3 ComputerCommunication Network
4 2 - 3 100 25 25 150
4 Discrete TimeSignalProcessing
4 2 3 100 25 25 150
5. Project stage I - - 4 - - 25 25 50
6. Elective-VIISem
4 2 - 3 100 25 25 150
Total. 20 10 4 - 500 150 150 800SCHEME FOR OFFERING ELECTIVE TO STUDENTS (Any ONE): BE, VII SemesterSEM VII: SEM VII: SEM VII: SEM VII:1.DATA COMPRESSION ANDENCRYPTION
2.INTRODUCTIONTO VLSI DESIGN
3.SPEECHPROCESSING
4.ELECTRONICPRODUCT DESIGN
Scheme for Semester VIII
Sr.No Subjects
No. of Periods per week(60 minutes each) Duration
ofTheorypapers(Hours)
Marks
Lecture
Practi-cal
Tuto-rial
Theory Term-work Oral Total
1. AdvanceMicrowaveEngineering
4 2 - 3 100 25 25 150
2. Optical FibreCommunication
4 2 - 3 100 25 25 150
3 WirelessNetwork
4 2 - 3 100 25 25 150
4. Project stage-II - - 8 - - 50 100 1505. Elective-VIII
Sem4 2 - 3 100 25 25 150
Total. 16 8 8 - 400 150 200 750SCHEME FOR OFFERING ELECTIVE TO STUDENTS (Any ONE): BE, VIII Semester
SEM VIII: SEM VIII: SEM VIII: SEM VIII:1. IMAGE PROCESSING 2. SATELLITE
COMMUNICATION3. TELECOM NETWORKMANAGEMENT
4. MICROWAVEINTEGRATEDCIRCUITS
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
28/48
BE, VII-VIII, E&TC Engineering wef 2010-1128
University of Mumbai
CLASS: B.E. (Electronics & TelecommunicationEngineering)
Semester - VIII
SUBJECT: Advanced Microwave Engineering
Periods per week(Each of 60 min.)
Lecture 4Practical 2Tutorial -
Hours MarksEvaluation System Theory Examination 3 100
Practical examination - -Oral Examination - 25
Term Work - 25Total 150
Module Contents Hours
Objective This course will help students understand thebasic principles and advanced applications ofMicrowave Engineering, as well as differentamplifier design, oscillators design, and mixers.
-
1 TWO-PORT NETWORKSTwo-Port Parameters. S-Parameters. S-Parameters from Spice Analysis. Stability. PowerGains, Voltage Gains and Current Gains. ThreePorts. Derivation of Transducer Power Gain.Differential S-Parameters. Twisted-Wire Pair
Lines. Low-Noise and High-Power AmplifierDesign.
6hrs
2 NOISE IN LINEAR TWO-PORTSignal-to-Noise Ratio. Noise FigureMeasurements. Noise Parameters and NoiseCorrelation Matrix. Noise Two-Port Description.Noise Figure of Cascaded Networks. Influence ofExternal Parasitic Elements. Noise Circuits.Noise Correlation in Linear Two-Ports usingCorrelation Matrices. Noise Figure TestEquipment. Determination of Noise Parameters.
Calculation of Noise Properties of Bipolar andFETs. Bipolar Transistor Noise Model in TConfiguration. The GaAs FET Noise Model.
8hrs
3 SMALL- AND LARGE-SIGNAL AMPLIFIERDESIGNIntroduction. Single-Stage Amplifier DesignHigh Gain, Maximum Available Gain andUnilateral Gain, Low-Noise, High-Power,
8hrs
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
29/48
BE, VII-VIII, E&TC Engineering wef 2010-1129
Broadband, Feedback, Cascode, Multistage,Distributed and Matrix, Multimeter-WaveAmplifiers. Frequency Multipliers. DesignExamples of 1.9-GHz PCS and 2.1-GHz W-CDMA Amplifiers. Stability Analysis and
Limitations.4 POWER AMPLIFIER DESIGNIntroduction. Device Modeling andCharacteristics. Optimum Loading. Single-StagePower Amplifier Design. Multistage Design.Power Distributed Amplifiers. Class of Operation.Power Amplifier Stability. Amplifier LinearizationMethods.
8hrs
5 OSCILLATOR DESIGNIntroduction. Compressed Smith Chart. Series ofParallel Resonance. Resonators. Two-Port
Oscillator Design. Negative Resistance fromTransistor Model. Oscillator Q and OutputPower. Noise in Oscillators: Linear Approach.Analytic Approach to Optimum Oscillator Designusing S Parameters. Nonlinear Active Models forOscillators. Oscillator Design using NonlinearCAD Tools. Microwave Oscillator Performance.Design of an Oscillator using Large Single YParameters. Example for Large Single DesignBased on Bessel Functions. Design Examplesfor Best Phase Noise and Good Output Power.
CAD Solution for Calculating Phase Noise inOscillators. Validation Circuits. AnalyticalApproach for Designing Efficient Microwave FETand Bipolar Oscillators.
10hrs
6 MICROWAVE MIXER DESIGNIntroduction. Diode Mixer Theory. Single-Diode,Single-Balanced, and Double-Balanced Mixers.FET Mixer Theory. Balanced FET Mixers.Special Mixer Circuits. Using Modern CADTools. Mixer Noise.Diode mixer theory, single diode mixer, balanced
mixer, FET mixer theory, balanced FET mixer
6hrs
Theory Examination:1. Question paper will comprise of total 7 questions, each of 20 marks.2. Only 5 questions need to be solved.3. Questions will be analytical and design oriented.4. Question number 1 will be compulsory and cover all modules.
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
30/48
BE, VII-VIII, E&TC Engineering wef 2010-1130
5. Remaining questions will be mixed in nature. (e.g. - Suppose Q.2 has part(a) from, module 3 then part (b) will be from any module other thanmodule 3.)
6. In the question paper, weightage of each module will be proportional tonumber of respective lecture hours as mentioned in the syllabus.
Oral Examination:Oral examination will be conducted to test the overall understanding ofthe subject based on the syllabus .
Term work:Term work shall consist of minimum four experiments & four tutorials and awritten test.The distribution of marks for term work shall be as follows,Laboratory work (Experiments and Journal) : 15 marks.Test (at least one) : 10 marks.
The final certification and acceptance of term-work ensures the satisfactoryperformance of laboratory work and minimum passing in the term-work.
Recommended Books:1. Microwave Circuit Design - George D. Vendelin, Anthony M. Pavio &
Ulrich L. Rehde John Wiley & Sons publication2. Radio Frequency and Microwave Electronics - Matthew M. Radmanesh
Pearson Education Asia publication
University of Mumbai
CLASS: B.E. (Electronics & TelecommunicationEngineering)
Semester - VIII
SUBJECT: Optical Fibre Communication
Periods per week(Each of 60 min.)
Lecture 4Practical 2Tutorial -
Hours MarksEvaluation System Theory Examination 3 100
Practical examination - -Oral Examination - 25
Term Work - 25Total 150
Module Contents Hours
Objective To understand the concept of transmissionthrough Optical Fibre.
-
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
31/48
BE, VII-VIII, E&TC Engineering wef 2010-1131
1 Overview Of Optical Fiber Communications:Communication system applications
in the electromagnetic spectrum, elements of orfiber transmission link, advantages of opticalfiber communication.
Light Propagation in Optical Fiber:Filter types, rays and modes, raytheory transmission, electromagnetic modetheory propagation, single mode and multimodefibers, linearly polarized models.
8hrs
2 Fiber Optics Technology:Fiber materials, fiber fabrication, fiber
optic cables, couplers, splices, connectors.
8hrs
3 Signal Degradation in Optical Fibers:
Alternation, dispersion, bit rate andbandwidths, mode coupling.
8hrs
4 Optical Sources and Detectors:Related semiconductor physics, light
emitting diodes, laser diodes, theircharacteristics modulation circuits, opticaldetection principles, quantum efficiency,responsively, n time photo detector noise, PINand Avalanche photodiodes.
8hrs
5 Optical Receiver Operation:Noise, Receiver capacitance, receiver
structures, pre-amplifiers.
8hrs
6 Optical Fiber Systems:Link power budget, rise time budget,
analog systems, digital systems, coherentsystems- homodyne and heterodyne detection,multiplexing.Optical Fiber Measurements:
Measurement of attenuation,dispersion, refractive index profile, numericalaperture diameter, OTDR.
8hrs
Theory Examination:
1. Question paper will comprise of total 7 questions, each of 20 marks.2. Only 5 questions need to be solved.3. Questions will be analytical and design oriented.4. Question number 1 will be compulsory and cover all modules.5. Remaining questions will be mixed in nature. (e.g. - Suppose Q.2 has part
(a) from, module 3 then part (b) will be from any module other thanmodule 3.)
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
32/48
BE, VII-VIII, E&TC Engineering wef 2010-1132
6. In the question paper, weightage of each module will be proportional tonumber of respective lecture hours as mentioned in the syllabus.
Oral Examination:Oral examination will be conducted to test the overall understanding of
the subject based on the syllabus .Term work:Term work shall consist of minimum six experiments and a written test.The distribution of marks for term work shall be as follows,Laboratory work (Experiments and Journal) : 15 marks.Test (at least one) : 10 marks.The final certification and acceptance of term-work ensures the satisfactoryperformance of laboratory work and minimum passing in the term-work.
Practical list
1. Analog fiber optic system
2. Digital fiber optic system
3.Measurement of numericalaperture
4. Measurement of attenuation
5. Measurement of pulse spreading
6. Multiplexing in fiber optic system
7. Light source characteristics
8. Measurements using OTDR
Recommended Books:Text Books:1. Optical Fiber Communication - John Senior Prentice Hall of India Publication.2. Optical Fiber Communication - Gred Keiser Mc- Graw Hill Publication
Reference Books:1. Fiber Optic Communication - Djafar K. Mynbarv, Lowell L. Scheiner2. Optical Fiber Communication - Selvarajan, Subartkar, T. Srinivas Tata Mc-Graw Hill Publication3. Fundamentals of Fibre Optics in Telecommunication and sensor System, PalB.P., New Age International4. Fiber Optic Communication, Agrawal, 3rdedi, Wiley5. Fibre optics and Optoelectronics by Khare,Oxford University Press6. Rajappa Papannareddy, Lightwave Communication Systems: A PracticalPerspective, Penram International Publishing
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
33/48
BE, VII-VIII, E&TC Engineering wef 2010-1133
University of Mumbai
CLASS: B.E. (Electronics & TelecommunicationEngineering)
Semester - VIII
SUBJECT: WIRELESS NETWORKPeriods per week(Each of 60 min.)
Lecture 4Practical 2Tutorial -
Hours MarksEvaluation System Theory Examination 3 100
Practical examination - -Oral Examination - 25
Term Work - 25Total 150
Module Contents Hours
Objective To understand the concept of wireless WAN,WAP and different IEEE standards.
-
1 Wide Area Wireless Networks (WANs) GSMEvolutionIntroduction, GSM evolution for data, Third-Generation (3G) Wireless SystemsUMTS Network Reference Architecture, ChannelStructure in UMTS Terrestrial Radio Access
Network, UMTS Terrestrial Radio AccessNetwork Overview ,UMTS Core NetworkArchitecture, Adaptive Multi-Rate Codec forUMTS, UMTS Bearer Service,HSDPA.
8hrs
2 Wide Area Wireless Networks (WANs) CDMA One EvolutionIntroduction, cdma2000 Layering Structure,Forward Link Physical Channels of cdma2000,Forward Link Features, Reverse Link PhysicalChannels of cdma2000Evolution of cdmaOne (IS-95) to
cdma2000,Technical Differences betweencdma2000 and WCDMA.
8hrs
3 Planning and Design of Wide Area WirelessNetworksIntroduction , Planning and Design of aWireless Network, Radio Design for a CellularNetwork, Receiver Sensitivity and Link Budget .
8hrs
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
34/48
BE, VII-VIII, E&TC Engineering wef 2010-1134
4 Wireless Application Protocol (WAP)Introduction, WAP and the World Wide Web(WWW) , Introduction to Wireless ApplicationProtocol , The WAP Programming Model ,WAPArchitecture , WAP Advantages and
Disadvantages , Applications of WAP, imode,imode versus WAP.
8hrs
5 Wireless Personal Area Network BluetoothIntroduction, The Wireless Personal AreaNetwork , Bluetooth (IEEE 802.15.1),Definitions of the Terms Used in Bluetooth,Bluetooth Protocol Stack, Bluetooth Link Types,Bluetooth Security, Network ConnectionEstablishment in Bluetooth, Network Topology inBluetooth, Bluetooth Usage Models, BluetoothApplications, WAP and Bluetooth
Wireless Personal Area Networks (WPAN):Low Rate (LR) and High Rate (HR)Wireless Sensor Network, Usage of WirelessSensor Networks, Wireless Sensor NetworkModel, Sensor Network Protocol Stack, ZigBeeTechnology, IEEE 802.15.4 LR-WPAN DeviceArchitecture, IEEE 802.15.3a Ultra WideBand,Radio Frequency Identification.
10hrs
6 Wireless Local Area Networks (WLANs)WLAN Equipment , WLAN Topologies, WLANTechnologies, IEEE 802.11 WLAN
Joining an Existing Basic Service Set, IEEE802.11n , IEEE 802.16 ,World Interoperability forMicroAccess, Inc. (WiMAX).
6hrs
Theory Examination:1. Question paper will comprise of total 7 questions, each of 20 marks.2. Only 5 questions need to be solved.3. Questions will be analytical and design oriented.4. Question number 1 will be compulsory and cover all modules.5. Remaining questions will be mixed in nature. (e.g. - Suppose Q.2 has part
(a) from, module 3 then part (b) will be from any module other thanmodule 3.)
6. In the question paper, weightage of each module will be proportional tonumber of respective lecture hours as mentioned in the syllabus.
Oral Examination:Oral examination will be conducted to test the overall understanding ofthe subject based on the syllabus .
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
35/48
BE, VII-VIII, E&TC Engineering wef 2010-1135
Term work:Term work shall consist of minimum Six experiments & tutorials and a writtentest.
The distribution of marks for term work shall be as follows,Laboratory work (Experiments and Journal) : 15 marks.Test (at least one) : 10 marks.The final certification and acceptance of term-work ensures the satisfactoryperformance of laboratory work and minimum passing in the term-work.
Recommended Books:Text:
1. Wireless communication and Networking-Vijay Garg, ELSEVIER Inc.2. Wireless Communication_Singal_TMH
Reference Books
1. Next Generation Wireless Systems and Networks: Hsiao Hwa Chen,Mohsen Guizani Wiley2. Wireless and Mobile Networks-Concepts and protocols: Dr Sunilkumar S.
Manvi, Mahabaleshwar S. Kakkasageri-- Wiley3. Essentials of UMTS: Christopher CoxCambridge
B. E. Electronics and Telecommunication EngineeringFourth Year Semester VIII
Subject Project -IIProject Hour: 8 Hrs/week Term work: 50 marksOral / Practical/ Presentation /Demonstration examination: 100 marksTotal marks= 150 marks
Note: One faculty will not guide more than 3 projects in a semester. For everygroup allotted to faculty the load is considered as 2 Hour per group (Internal/External Project) per week, be specified in the time table of faculty.
Rationale: Project allows the student to work independently to put theknowledge of Electronics and Telecommunication engineering theoryinto
practice. Detailed descriptionIn continuation to the efforts taken towards building the project in VII semester,during VIII semester, students are expected to complete their project idea andmeet the set goals and compile the project report.FINAL PROJECT REPORTYour guide will give you specific instructions as to the expected content of yourfinal report. The report should cover the progress that has been made, including
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
36/48
BE, VII-VIII, E&TC Engineering wef 2010-1136
results obtained, graphical data, design drawings, and a statement ofconclusions and recommendations (if applicable). Details of theory, experimentaldata, computer programs, purchased materials, sources and suppliers etc., mustbe included. Your report must be sufficiently complete that a student continuingyour project would benefit from your report and would not be required to
duplicate any of your work.
PROJECT MARKING SCHEMEA project used to assign marks in three general categories, as explained below.Achievement in each of these areas is critical to a successful project.Project Goals & Achievements (20%): Guide will evaluate both the difficulty ofthe goals and whether the goals were achieved. Although projects will differ, it isalways extremely important to set goals at the start of a project and work towardthese goals. The project goals should be set in collaboration with the guide andan effort should be made to establish a realistic scope for the project. In somecases, it may become apparent as the project progresses that the original goals
need to be adjusted and a modified set of goals must be set.Final Report Quality & Content (40%): This is an evaluation of the quality of thefinal report based on the report format, the clarity of communication and theanalytical content.Student Organization, Creativity & Effort (40%): This portion of the evaluationreflects the student's performance, with emphasis on effort, organization,creativity and initiative.
Project Report OutlineThe hard-bound report will contain following details:
Title
Certificate Acknowledgement (if any)
Table of Contents List of Figures
Abstract
Introduction
Literature Survey
Mathematical Modeling/ Analysis and Design
Implementation
Result and Discussion Conclusion and Future Scope
Reference Appendix (optional)
Term work
Term work shall consist of the above mentioned activities which shall beevaluated and shall carry a weight-age of 50 marks.
Oral ExaminationThe oral examination shall be conducted on the basis of presentation/ practical /
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
37/48
BE, VII-VIII, E&TC Engineering wef 2010-1137
demonstration given by the students and shall carry a weightage of 100 marks..
University of Mumbai
CLASS: B.E. (Electronics & Telecommunication
Engineering)
Semester VIII
ElectiveSUBJECT: Digital Image Processing
Periods per week(Each of 60 min.)
Lecture 4Practical 2Tutorial -
Hours MarksEvaluation System Theory Examination 3 100
Practical examination - -Oral Examination - 25
Term Work - 25Total 150
Module Contents Hours
Objective
The objectives of this course are to:- Cover the basic theory and algorithms that arewidely used in digital image processing- Expose students to current technologies andissues that are specific to image processingsystems- Develop hands-on experience in using computersto process images.
-
1 Digital Image fundamentals
Digital Image Representation, Elements of digital
Image processing systems, Elements of Visual
Perception, Sampling and Quantization, Basic
relationships between pixels.
4 hrs
2 Image Transforms
2D DFT and its properties, Walsh Transform,
Hadamard Transform, Haar Transform, Discrete
Cosine Transform, Slant Transform, Hotelling
Transform.
10 hrs
3 Image Enhancement
Spatial Domain Methods, Point Processing, 10 hrs
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
38/48
BE, VII-VIII, E&TC Engineering wef 2010-1138
Neighbourhood Processing, spatial domain filtering,
Zooming, Enhancement based on Histogram
modeling, Enhancement in Frequency domain,
Frequency domain filters, Generation of spatial mask
from frequency domain.
4 Image Compression
Fundamentals, Image compression model,
Redundancy, Error Criteria, Information Theory for
Image compression, Lossy and lossless compression
techniques, Image compression standards.
10 hrs
5 Image Segmentation
Image segmentation based on discontinuities(Point,
Line & Edge detection), Edge Linking, Thresholding
(Global, Local, Optimum), Region based Segmentation
4 hrs
6 Image Restoration
Model of Image degradation and Restoration Process,
Noise models, Spatial Filtering, Frequency Domain
Filtering, Modeling the degradation function, Inverse
Filtering, Wiener Filtering
10 hrs
Theory Examination:1. Question paper will comprise of total 7 questions, each of 20 marks.2. Only 5 questions need to be solved.3. Questions will be analytical and design oriented.4. Question number 1 will be compulsory and cover all modules.5. Remaining questions will be mixed in nature. (e.g. - Suppose Q.2 has part
(a) from, module 3 then part (b) will be from any module other thanmodule 3.)
6. In the question paper, weightage of each module will be proportional tonumber of respective lecture hours as mentioned in the syllabus.
Oral Examination:Oral examination will be conducted to test the overall understanding ofthe subject based on the syllabus .
Term work:Term work shall consist of minimum eight experiments from the suggested Listsuch that all the modules are covered & 2 tutorials and a written test.The distribution of marks for term work shall be as follows,
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
39/48
BE, VII-VIII, E&TC Engineering wef 2010-1139
Laboratory work (Experiments) : 15 marks.Test (at least one) : 10 marks.The final certification and acceptance of term-work ensures the satisfactoryperformance of laboratory work and minimum passing in the term-work.
Practical list1. Spatial and Tonal Resolution2. Image Rotation, Scaling, Translation3. Forward and Inverse Transform. Comparing Inverse Transform with Image
data.4. Histogram Equalization5. Spatial Domain filtering (High Pass, Lowpass, High Boost)6. Frequency Domain Filtering (Butterworth filter)7. Homomorphic Filtering8. Compression codes9. Image Thresholding
10. Impulse Noise removal11. Gaussian Noise removalRecommended Books:
Text1. Digital Image Processing- By R. Gonzales, R. Woods- Pearson Education2. Fundamentals of Image Processing- By Anil K. Jain, Prentice Hall of India
Publication
Reference1. Image Processing Analysis and Machine vision- Milan Sonka, Viciav
Hivac, Roger Boyle- Thomson Learning Publication2. Digital Image Processing, Pratt, 3rdedi, Wiley India
University of Mumbai
CLASS: B.E. (Electronics & TelecommunicationEngineering)
Semester VIIIElective
SUBJECT: Satellite Communications
Periods per week(Each of 60 min.)
Lecture 4Practical 2
Tutorial -Hours Marks
Evaluation System Theory Examination 3 100Practical examination - -
Oral Examination - 25Term Work - 25
Total 150
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
40/48
BE, VII-VIII, E&TC Engineering wef 2010-1140
Module Contents Hours
Objective To understand the concept of satellitelaunching and its operations.
-
1 Introduction:General background, frequency allocations forsatellite services, basic satellite system, systemdesign considerations, applications.
Satellite Orbits:
Introduction, laws governing satellitemotion, antenna look angles, antenna mount,limits of visibility, Earth eclipse of satellite,inclined orbits, sun-synchronous orbit, launching
of geostationary satellites.
8hrs
2 Wave Propagation and Polarization:Introduction, atmospheric losses,
ionospheric effects, rain attenuation, otherimpairments, antenna polarization, polarizationof satellite signals, cross polarizationdiscrimination, ionospheric depolarization, raindepolarization, ice depolarization.
6hrs
3 Communication Satellites:Introduction, design considerations, lifetime andreliability, spacecraft sub systems, spacecraftmass and power estimations, space segmentcost estimates.Satellite Antenna:
Antenna basics, aperture antennas,parabolic reflectors, offset feed, double relflectorantenna shaped reflector systems.
10hrs
4 Link Design:
Introduction, transmission losses, linkpower budget equation, system noise, carrier tonoise ratio for uplink and downlink, combineduplink and downlink carrier to noise ratio,intermodulation noise.
8hrs
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
41/48
BE, VII-VIII, E&TC Engineering wef 2010-1141
5 Earth Stations:
Introduction, design considerations,general configuration and characteristics.
6hrs
6 Multiple Access Techniques:Introduction, FDMA, TDMA,
FDMA/DMA, operation in a multiple beamenvironment, CDMA, multiple access examples
8hrs
Theory Examination:1. Question paper will comprise of total 7 questions, each of 20 marks.2. Only 5 questions need to be solved.3. Questions will be analytical.4. Question number 1 will be compulsory and cover all modules.5. Remaining questions will be mixed in nature. (e.g. - Suppose Q.2 has part
(a) from, module 3 then part (b) will be from any module other thanmodule 3.)
6. In the question paper, weightage of each module will be proportional tonumber of respective lecture hours as mentioned in the syllabus.
Oral Examination:Oral examination will be conducted to test the overall understanding ofthe subject based on the syllabus .
Term work:Term work shall consist of minimum six experiments & 3 tutorials and a writtentest.
The distribution of marks for term work shall be as follows,Laboratory work (Experiments and Journal) : 15 marks.Test (at least one) : 10 marks.The final certification and acceptance of term-work ensures the satisfactoryperformance of laboratory work and minimum passing in the term-work.
Recommended Books:Text Books:
1. Satellite Communication, A.K.Maini; Varsha Agrawal, Wiley India
2. Satellite Communications - Dennis Roddy - 3rd edition, Mc-Graw HillpublicatioReference
1. Satellite Communications systems - M. Richharia - 2nd editionMc Millan publication.
2. Satellite Communication, Pratt T, John Wiley
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
42/48
BE, VII-VIII, E&TC Engineering wef 2010-1142
University of Mumbai
CLASS: B.E. (Electronics & TelecommunicationEngineering)
Semester VIIIElective
SUBJECT: Telecommunication Network ManagementPeriods per week(Each of 60 min.)
Lecture 4Practical 2Tutorial -
Hours MarksEvaluation System Theory Examination 3 100
Practical examination - -Oral Examination - 25
Term Work - 25Total 150
Module Contents Hours
Objective To understand the concept of Telecomnetwork management, architecture andprotocol.
-
1 Foundations:
Network management standards,network management model, organizationmodel, information model abstract syntaxnotation 1 (ASN.1), encoding structure, macros,
functional model.
Network management application functionalrequirements:
Configuration management, faultmanagement, performance management, Errorcorrelation technology, security management,accounting management, common management,report management, polity based management,service level management, management service,community definitions, capturing the
requirements, simple and formal approaches,semi formal and formal notations.
8hrs
2 Telecommunication management network(TMN) architecture:
Terminology, functional architecture,information architecture, physical architecture,TNN cube, TMN and OSI .
8hrs
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
43/48
BE, VII-VIII, E&TC Engineering wef 2010-1143
3 Common management information serviceelement (CMISE):
CMISE model, service definitions, errors,scooping and filtering features, synchronization,functional units, association services, common
management information protocol (CMIP)specification.
8hrs
4 Information Modeling for TMN:Rationale for information modeling,
management information model, object orientedmodeling paradigm, structure of managementinformation, managed object class definition,management information base (MIB)
8hrs
5 Simple network management protocol(SNMP):
SNMPv1: managed networks, SNMP
models, organization model, information model,SNMPv2 communication model, functionalmodel, major changes in SNMPv2, structure ofmanagement information (SMI), MIB, SNMPv2protocol, compatibility with SNMPv1, SNMPv3,architecture, applications, MIB security, remotemonitoring (RMON) SMI and MIB, RMQN1 andRMON2.
8hrs
6 Network management examples:ATM integrated local management
interface, ATM MIB. M1, M2,M3, M4, interfaces,
ATM digital exchange interface management,digita1 subscriber loop (DSL) and asymmetricDSL (ADSL) technologies, ADSL configurationmanagement, performance managementNetwork management tools:Network statistics management, networkmanagement system, management platformcase studies: OPENVIEW, ALMAP.
8hrs
Theory Examination:1. Question paper will comprise of total 7 questions, each of 20 marks.2. Only 5 questions need to be solved.
3. Question number 1 will be compulsory and cover all modules.4. Remaining questions will be mixed in nature. (e.g. - Suppose Q.2 has part
(a) from, module 3 then part (b) will be from any module other thanmodule 3.)
5. In the question paper, weightage of each module will be proportional tonumber of respective lecture hours as mentioned in the syllabus.
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
44/48
BE, VII-VIII, E&TC Engineering wef 2010-1144
Oral Examination:Oral examination will be conducted to test the overall understanding ofthe subject based on the syllabus .
Term work:
Term work shall consist of minimum six experiments & tutorials and a writtentest.The distribution of marks for term work shall be as follows,Laboratory work (Experiments and Journal) : 15 marks.Test (at least one) : 10 marks.The final certification and acceptance of term-work ensures the satisfactoryperformance of laboratory work and minimum passing in the term-work.
Recommended Books:Text Books:
1. Network Management: Principles and Practice - Mani Subramanian, Addison
Wesley, Pearson Education Asia publication.2. Fundamentals of Telecommunication Network Management - Lakshmi RamanIEEE Communication Society, Prentice Hall of India Edition 19993.Telecommunication Network Management: Technologies and Implementations- Airdarous Salah, Plevyak Thomas. Prentice Hall of India
Reference Books:1. Telecommunication Network Management - Haojin Wang
Mc- Graw Hill Professional Publication
University of Mumbai
CLASS: B.E. (Electronics & TelecommunicationEngineering)
Semester VIIIElective
SUBJECT: Microwave Integrated Circuits
Periods per week(Each of 60 min.)
Lecture 4Practical 2
Tutorial -Hours Marks
Evaluation System Theory Examination 3 100Practical examination - -
Oral Examination - 25Term Work - 25
Total 150
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
45/48
BE, VII-VIII, E&TC Engineering wef 2010-1145
Module Contents Hours
Objective To understand the integration of microwavedevices in the form of IC.
-
1 Hybrid MICs :
Definition, characteristics, comparisonwith conventional circuits, fields of applicationand limitations and criteria for the choice ofsubstrate material; thin film hybrid circuits, thickfilm hybrid circuits, artwork, mask making,photolithography, resistor stabilization, sawing,brazing process, wire bonding.
9hrs
2 Monolithic MICs:
Definition, substrate structure, doping byion implantation ohmic contact, metal resistivelayers, gate metal, dielectric second level metal,dielectric and air bridge vias, substrate vias, finalwafer process steps.
9hrs
3 Micro strip Lines:
Planar wave guides, non- TEMpropagation, line impedance definitions, quasi-static approximations, quasi-static lineparameters, micro strip open circuits and gaps,micro strip corners, step changes in width,dispersion analysis, micro strip characteristicimpedance, symmetric T junction, full waveanalysis of micro strip propagation, LSE andLSM potentials, spectral domain analysis,dispersion relation for open micro strip, spectraldomain impedance analysis, dispersion relationfor open micro strip, spectral domain impedanceanalysis, Green's functions, millimeter wavemodeling of micro strip lines.
9hrs
4 Coupled Line Propagation:
Wave equations for coupled lines,propagation models, coupled line parameters,coupled line parameter variations with frequency,directional couplings, Lange coupler coupled line
9hrs
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
46/48
BE, VII-VIII, E&TC Engineering wef 2010-1146
pair treated as a four port, coupled line pairoperated as a two port assuming Oe = 0o, lowpass filtel design assuming Oe =0o, coupled linepair analysed to a two port Oe not equal to 0o,narrow band filter using coupled resonator,
narrow band coupled line filters, suspendedsubstrate strip lined filters, suspended substratestrip line filter design using method 1 andmethod 2.
5 Slot Lines:
Analysis, design consideration,transitions and applications.Coplanar Waveguide:
Analysis, design considerations and
coplanar line circuits.
Devices:GaAs FET, HEMT, gunn diode, varactor
diodes, PIN diodes YIC resonators, dielectricresonators & their application in oscillator mixerand amplifiers.
9hrs
Theory Examination:1. Question paper will comprise of total 7 questions, each of 20 marks.2. Only 5 questions need to be solved.
3. Questions will be analytical .4. Question number 1 will be compulsory and cover all modules.5. Remaining questions will be mixed in nature. (e.g. - Suppose Q.2 has part
(a) from, module 3 then part (b) will be from any module other thanmodule 3.)
6. In the question paper, weightage of each module will be proportional tonumber of respective lecture hours as mentioned in the syllabus.
Oral Examination:Oral examination will be conducted to test the overall understanding ofthe subject based on the syllabus .
Term work:
Term work shall consist of minimum six tutorials and a written test.The distribution of marks for term work shall be as follows,Laboratory work (Experiments and Journal) : 15 marks.Test (at least one) : 10 marks.The final certification and acceptance of term-work ensures the satisfactoryperformance of laboratory work and minimum passing in the term-work.
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
47/48
BE, VII-VIII, E&TC Engineering wef 2010-1147
Recommended Books:Text Books:
1. Microstrip Circuit Analysis - David H. Schrader, Prentice Hall PTR, NewJersey
2. Microstrip lines and Slot lines- KC. Gupta, R. Gargand I.J. Bahl , ArtechHouse.
3. MIIC Design: GaAs FETs and HEMTs- Peter Ladbrooke ,Artech House.
4. Foundations for Microstr!p Circuit Design -T.C. Edwards,John Wiley and Sons
Reference Books:
1. MIC and MMIC Amplifier and Oscillator Circuit Design- Allen Sweet, ArtechHouse.
2. Handbook of Microwave Integrated Circuits- Reinmut K Hoffman, ArtechHouse.
-
7/22/2019 Sem VII and VIII Mumbai University Syllabus
48/48
B.E. Electronics & Telecommunication Engineering
VII-Seventh Semester (R2001) -Old Equivalent VII-Seventh Semester (R2007)-Revised
1. Digital Communication Digital Communication (TE, VI sem R-2007)
2. Mobile Communication Systems Mobile Communication Systems
3. Microwave Devices and Circuits Fundamentals of Microwave Engineering
4. Discrete Time Signal Processing Discrete Time Signal Processing
5. Elective I
Radar Engineering Radar Engineering(TE, VI sem R-2007)
Image Processing Image Processing(BE, VIII sem R-2007)
Data Compression and encryption DATA COMPRESSION AND ENCRYPTION
Microwave Integrated Circuits MICROWAVE INTEGRATED CIRCUITS(BE, VIIIsem R-2007)
Simulation of Communication Systems No Equivalent** Student needs to appear in the same subject of R-2001
B.E. Electronics & Telecommunication Engineering
VIII-Eighth Semester (R2001)-Old Equivalent VIII-Eighth Semester (R2007)-Revised
1. Satellite Communication SATELLITE COMMUNICATION
2. Optical Fiber Communication Optical Fibre Communication
3. Computer Communication Networks Computer Communication Network(VII R2007)
4. Elective IIWireless Networks Wireless Network
Digital Voice Communication Digital Telephony (TE, VI sem R-2007)
Telecommunication Network Management TELECOM NETWORK MANAGEMENT
Microwave Amplifier and Oscillator Design Advance Microwave Engineering
Optical Networks No Equivalent*
Internet Communication Engineering No Equivalent*
* Student needs to appear in the same subject of R-2001