select the right lng storage tank design in your industry
TRANSCRIPT
Give a thought before you buy the cryogenic tanks!
Cryogenic gases are one of the natural resources which have made our life easier in many ways. Be
it liquid nitrogen, liquid argon, liquid oxygen or liquefied natural gas; every gas is directly or
indirectly is associated with our lives.
But, if these gases have made our life a
lot easier to live, then at the same
time, these gases need our special care
and extra attention, because,
extremely low temperature is required
to store these cryogenic gases. A
cryogenic tank is designed for storage
of not only liquid gases, but also many
hazardous gases at nearly zero
temperature. These tanks are
manufactured with special technical knowledge and smart fabrication techniques.
You will be surprised to know that the temperature inside some cryogenic tanks is below 0° C,
which is safe to store such gases. Not only this, the storage capacity of few tanks is measured
above 1000 liters to 2000 liters, which ensures the safe transportation of these gases from one city
to another.
And, that is why; the transporters who deal with oil and gas industry always need the manufacturer
who can manufacture the best cryogenic tanks, and can fulfill their needs accordingly. There are
only a few companies which manufacture the cryogenic tanks with required and appropriate
specifications.
Unquestionably, if you are a transporter then you would prefer to select the right LNG storage tank
design industry around you. It requires the unique engineering expertise and the highest quality of
safety measures. A slight mistake can change the whole scenario. In other words, you can’t afford
to have a casual attitude while manufacturing such tanks because it is just not a challenging job
but a demanding one too.
The concern of a transporter multiplies if he comes to know that the company he is buying
cryogenic tanks from, doesn’t provide services or damage repair of these tanks. Inner vessel repair,
structural fabrication, valves and pump repair installation or its replacements, leak detection,
welding and vacuum investigation are few basic services which every cryogenic tank manufacturing
company should provide.
If you’re a transporter, then following are some features which you should check before buying the
cryogenic tanks
1. Minimum evaporation loss due to high degree evacuation and filling inter space with
Expanded Power Insultant.
2. Instruments suitably positioned for easy access and operation
3. Fitted with insulators, safety valves, pressure gauge etc
4. Suitably positioned for easy access and operation
Satisfy yourself by asking all your queries, before you place your order. Remember, the company
you’re hiring the services from, has a lot to do with your transport business.