section+03h +fgv+hinges
TRANSCRIPT
8/6/2019 Section+03H +FGV+Hinges
http://slidepdf.com/reader/full/section03h-fgvhinges 1/10
Version : 2008
Page 3H1
Section 3H
T e l : 1 . 8 0 0 . 6 1 9 . 5 4 4 6 • F a x : 1 . 8 0 0 . 8 7 6 . 7 4 5 4www.richelieu.com
| Hinges |FGV Hinges
Independent side adjustmentActing on the “A” screw, youchange the overlay of the door.
- 2 mm / + 5 mm
(-2 mm / +6 mm for Optima)
Front adjustmentActing on screw “B” you adjust thegap between side gable and door.
1mm in and 2,5 mm out
( +/- 1,5 mm for Optima)
Vertical adjustmentActing on screw ”C”, you adjustthe door vertically.
+ / - 1,75 mm
(+/- 1,5 mm for Optima)
1Place the front partof the hinge on thefront side of the plate.
2Rotate the armof the hinge.
3Press down the rear partof the hinge to click on.
ADJUSTMENT SYSTEM
M CLICK MOUNTING SYSTEM
M CLICKOPTIMA
A B C
« M Click » is the latest Series of modular Click-On hinges. Designed with thelatest computer technology, coupled with 50 years of experience in hinge production.The « M Click » series offers a unique combination of strength, reliability, and easytool-less assembly. The « M Click » range of hinges and plates is comprehensive andcovers all the requirements of a world-wide market. « M Click » hinges are now alsoavailable in OPTIMA version with an in and out cam adjustment.
Table to nd the number of hinges to use according to thedoor height:
1 3 ÷
1 7 K g
1 8 ÷
2 2 K g
7 ÷
1 2 K g
4 ÷
6 K g
W = Door width
H H = Door height
W
(in cm)
Weight
8/6/2019 Section+03H +FGV+Hinges
http://slidepdf.com/reader/full/section03h-fgvhinges 2/10
Version : 2008
Page 3H2
Section 3H
T e l : 1 . 8 0 0 . 6 1 9 . 5 4 4 6 • F a x : 1 . 8 0 0 . 8 7 6 . 7 4 5 4www.richelieu.com
| Hinges |FGV Hinges
Full overlay hinges 110˚
NO. CUP MOUNT DESCRIPTION QTY/BOX
US8511600 8 MM DOWELS HINGE XS WITH SPRING FULL OVERLAY 110˚ 250
Cup fixed with 8 mm dowels(Press in)
H = (14 + A + K) - S
Table to find the minimum distance “A” so that a door with a “T” thickness can open properly andwithout interfering with adjacent doors
To find the height of the plate usecharts below:
110˚
FULL OVERLAY
Crank 0
WITH CAM ADJUSTMENT
*Mounting plates are shown on page 3H7
H = Height of plate
A = Minimum gap
K = Cup drilling distance
T = Door thickness
S = Side gable thickness
Cabinet drilling range (K) from 3to 7 mm. Door thickness range (T)from 16 to 26 mm.
OPTIMA
Click-on hinge/Optima 110˚• OPTIMA model with special in and out cam adjustment ( + - 1.5 mm )• Depth of the metal cup: 11.3 mm• Cup diameter: 35 mm• For most applications select a 2 mm plate for 19 mm (3/4’’) thick side gables and
a 4 mm for 16 mm (5/8’’) thick side gables
8/6/2019 Section+03H +FGV+Hinges
http://slidepdf.com/reader/full/section03h-fgvhinges 4/10
Version : 2008
Page 3H4
Section 3H
T e l : 1 . 8 0 0 . 6 1 9 . 5 4 4 6 • F a x : 1 . 8 0 0 . 8 7 6 . 7 4 5 4www.richelieu.com
| Hinges |FGV Hinges
Full overlay hinges 175˚
NO. CUP MOUNT DESCRIPTION QTY/BOX
US7511670 8 MM DOWELS HINGE MX WITH SPRING FULL OVERLAY 175˚ 125
H = (14 + A + K) - S
Table to find the minimum distance “A” so that a door with a “T” thickness can open properly andwithout interfering with adjacent doors
FULL OVERLAY
Crank 0
To find the height of the plate usecharts below:
175˚
Cup fixed with 8 mm dowels(Press in)
Cup fixed with wood screws(Screw on)
Cabinet drilling range (K) from 3to 7 mm. Door thickness range (T)from 16 to 26 mm.
H = Height of plateA = Minimum gap
K = Cup drilling distance
T = Door thickness
S = Side gable thickness
*Mounting plates are shown on page 3H7
M CLICK
Click-on hinge/M Click 175˚• Depth of the metal cup: 11.3 mm• Cup diameter: 35 mm• Door opening 165 degree
8/6/2019 Section+03H +FGV+Hinges
http://slidepdf.com/reader/full/section03h-fgvhinges 6/10
Version : 2008
Page 3H6
Section 3H
T e l : 1 . 8 0 0 . 6 1 9 . 5 4 4 6 • F a x : 1 . 8 0 0 . 8 7 6 . 7 4 5 4www.richelieu.com
| Hinges |FGV Hinges
45˚ hinges for angle cabinet
NO. CUP MOUNT DESCRIPTION QTY/BOX
US7511645 8 MM DOWELS HINGE MX WITH SPRING CORNER 45˚ 250
Blind corner cabinet hinges
NO. CUP MOUNT DESCRIPTION QTY/BOX
US7511690 8 MM DOWELS HINGE MX WITH SPRING BLIND CORNER 110̊ 250
45˚ ANGLE
BLIND CORNER
Cabinet drilling range (K) from 5 to6 mm. Door thickness range (T) from16 to 26 mm.
*To nd the height of the plate: use a 2 or 4 mm plate depending on your K cup drillingdistance and depending on the edge of your side gable
*To nd the height of the plate: always use a 4 mm mounting plate
Cup fixed with 8 mm dowels(Press in)
Cup fixed with wood screws(Screw on)
*Mounting plates are shown on page 3H7
H = Height of plate
A = Minimum gap
K = Cup drilling distance
T = Door thickness
S = Side gable thickness
M CLICK
Click-on hinge/M Click/45˚/Blind corner/24˚- 30˚• Depth of the metal cup: 11.3 mm• Cup diameter: 35 mm
8/6/2019 Section+03H +FGV+Hinges
http://slidepdf.com/reader/full/section03h-fgvhinges 7/10
Version : 2008
Page 3H7
Section 3H
T e l : 1 . 8 0 0 . 6 1 9 . 5 4 4 6 • F a x : 1 . 8 0 0 . 8 7 6 . 7 4 5 4www.richelieu.com
| Hinges |FGV Hinges
Screw 0nMetal cruciform mounting plate / Self-tapping screw / Vertical adjustmentScrews have to be ordered separatelyNO. HEIGHT DESCRIPTION QTY/BOX
US75240102 2 MM MOUNTING PLATE MX SCREW ON 500US75240104 4 MM MOUNTING PLATE MX SCREW ON 1000
Premounted Euro screwMetal cruciform mounting plate / L: 14mm / Dia: 5 mmEuro screws premounted / Vertical adjustmentNO. HEIGHT DESCRIPTION QTY/BOX
US75241602 2 MM MOUNTING PLATE MX EURO-SCREW 500US75241604 4 MM MOUNTING PLATE MX EURO-SCREW 500
Click-on mounting platesThe mounting plates for this series of hinges are cross-shaped. The hinge may be attached to the cabinet using Euro screws, woodscrews, 5 mm expando dowels, and cam adjustment. Available also in face frame version.
*To know which height to use, refer to the mounting plate height calculation you will nd on the hinge pages.
8/6/2019 Section+03H +FGV+Hinges
http://slidepdf.com/reader/full/section03h-fgvhinges 8/10
Version : 2008
Page 3H8
Section 3H
T e l : 1 . 8 0 0 . 6 1 9 . 5 4 4 6 • F a x : 1 . 8 0 0 . 8 7 6 . 7 4 5 4www.richelieu.com
| Hinges |FGV Hinges
Hinges for aluminum 105 degrees framed doors
• Hinges• Prole no. 35041210 (can be cut to size at 45 degrees)• Glass gasket no. 1001211 (to insert the glass softly in the aluminum prole)• Inside cap no. 10034100 to cover the inside part of the frame
• Corner no. 513174 to connect the frame together• Order your own glass
HINGES
DESCRIPTION NO. QTY/BOX
HINGE FULL OVERLAY 7511800 250HINGE HALF OVERLAY 7511808 250HINGE INSET OVERLAY 7511815 250
The hinges for aluminum frameddoors are an easy way to give yourkitchen a contemporary look.You can easily customize your alu-minum doors by choosing differentsizes and kind of glasses.
CHOOSE THE RIGHT HEIGHT OF THE PLATE:
SIDE GABLE APPLICATION A AT LEAST HEIGHT OF THE PLATE
16 MM (5/8”) FULL OVERLAY 1 MM 2 MM16 MM (5/8”) HALF OVERLAY 2 MM 2 MM
16 MM (5/8”) INSET 1 MM 4 MM19 MM (3/4”) FULL OVERLAY 3 MM 2 MM19 MM (3/4”) HALF OVERLAY 3 MM 2 MM19 MM (3/4”) INSET 1 MM 4 MM
Crank 0Hinge for lay-on doorsH = (14 + A +K) - S
Formula to determine the thickness « H » of the mounting plate
Crank 8Hinge for partial lay-on doorsH = (6 + A + K) - S
Crank 15Hinge for partial lay-on doorsH = A + K - 1
D = 4,5 + H + crank height
HINGES
FOR
ALIM INUM
DOO RS
105˚
8/6/2019 Section+03H +FGV+Hinges
http://slidepdf.com/reader/full/section03h-fgvhinges 9/10
Version : 2008
Page 3H9
Section 3H
T e l : 1 . 8 0 0 . 6 1 9 . 5 4 4 6 • F a x : 1 . 8 0 0 . 8 7 6 . 7 4 5 4www.richelieu.com
| Hinges |FGV Hinges
Anodised aluminum proles• No need to drill a hole in your frame; just slide in the hinge into the prole
LENGTH NO. QTY/BOX
12’ (144”) 35041210 10
4 mm clear glass door gasket
LENGTH NO. QTY/BOX
8’ (96”) 1001211 12
3/4” Silver inside cap
LENGTH NO. QTY/BOX
12’ (144”) 10034100 12
Connecting joint 4 holes
WIDTH X LENGTH NO. QTY/BOX
10 MM X 44 MM (13/32” X 1-3/4”) 513174 500