section eight engineering - niteh eight engineering ... 52380 pvc300f 0-300mm/12" €60.99...

section eight

engineering

precision . . . . . . . . . . . . . . . . . . . . . . . . . . 318-320general engineering . . . . . . . . . . . . . . . . . 321-332

engineering tools

precision�

318 Prices are list, each and exclude VAT.

Vernier CalipersExpert Quality, manufactured from hardened stainlesssteel. Reading 0.02mm/1/1000". Four way measurement:internal, external, depth and step. Satin scales with fineadjustment. Fine screw adjustment. Supplied in plasticstorage case and display packed.

Stock Part Euro GBP £No. No. Range each each

50605 PVC140F 0-140mm/5.1/2" €30.48 £20.3252379 PVC200F 0-200mm/8" €40.11 £26.7452380 PVC300F 0-300mm/12" €60.99 £40.66

1

PVC150

Vernier CaliperExpert Quality, manufactured from hardened stainlesssteel. Reading 0.02mm and 1/1000". Four waymeasurement: internal, external, depth and step. Satinchrome plated beam with raised edges and thumblock.Supplied in plastic storage case and display packed.

Stock Euro GBP £No. Range each each

50590 0 -150mm/6" €32.07 £21.38

2

PDV150

Metric Dial CaliperExpert Quality, manufactured from hardened stainlesssteel. Slider displacements are amplified by a rack andpinion mechanism and indicated on the dial. Four waymeasurement: internal, external, depth and step.Reading 0.02mm. Slider has lockscrew function.Supplied in plastic storage case and display packed.


52417 0-150mm €48.15 £32.10

3

PVC150D

Dual Reading Digital Vernier CaliperExpert Quality, manufactured from hardened stainlesssteel. Extra large display reading 0.01mm and 0.0005".Range 0-150mm/6". Supplied with SR44 battery.Supplied in plastic storage case and display packed.

Stock Euro GBP £No. Description each each

52427 Vernier Caliper €91.47 £60.9855361 Sp. Battery €3.24 £2.16

4

PM025

Metric External MicrometerExpert Quality, with enamelled frame, heat plates, satinchrome thimble and sleeve. Graduations 0.01mm.Carbide tipped anvils, lock and ratchet stop. Supplied inplastic storage case and display packed.


50604 0-25mm €25.65 £17.10

5

PM025D

Dual Reading Digital External MicrometerExpert Quality, with enamel frame, heat plates, satinchrome thimble and sleeve. Carbide tipped measuringanvils, lock and ratchet stop. Range 0-25mm/0-1".Supplied in plastic storage case and display packed.Features:• 0-25mm/0-1"• zero reset in any position• metric/imperial conversion• graduated 0.001mm/0.0001"• serial output for data• auto switch off• powered by SR44 battery (supplied)• adjusting tool supplied


52426 Micrometer €142.89 £95.2655361 Sp. Battery €3.24 £2.16

6

MS-6

6 piece Measuring SetUseful set of precision measuring instruments. Displaycarton.Contents:• spring divider• outside caliper• inside spring caliper• depth gauge• slide rule• sliding caliper

Stock Euro GBP £No. per set per set

59110 €24.96 £16.64

7

PTGS

6 piece Telescopic Gauge SetExpert Quality, for measuring of bore diameter andgroove width. The spring-loaded plunger expandswithin the hole. Knurled locking screw allows plungercontacts to be held in position, removed and measuredwith a micrometer. Satin chrome finish. Supplied in PVCstorage wallet with ranges marked.Ranges:• 8-13mm (5/16 - 1/2") Length: 115mm• 13-19mm (1/2 - 3/4") Length: 115mm• 19-31mm (3/4 - 1.1/4") Length: 115mm• 31-54mm (1.1/4 - 2.1/8") Length: 145mm• 54-89mm (2.1/8 - 3.1/2") Length: 145mm• 89-150mm (3.1/2 - 6") Length: 145mm


52416 €35.34 £23.56

8

norman saysAs a trained engineer, I takepride in our range ofmeasuring instruments; superb quality withincredible value for money

7

product locatorGeneral purpose calipergauges are shown on page 260

section 8

precision�

319Prices are list, each and exclude VAT.

PBPS

Universal Bevel Protractor SetExpert Quality, for accurate angle measurement ofmachines, moulds and jigs. Can also be used forassembling and machining. Fully calibrated to 360° withmagnifying glass. Supplied complete with 300mm plainrule and acute angle attachment. Display packed inhinged plastic case.


52430 €88.29 £58.86

1

PDG

Dial IndicatorsExpert Quality, reading 0-50 in metric or imperialgraduations. Dial diameter 55mm. Display carton.

Stock Euro GBP £No. Graduations Range each each

51830 0.01mm 0-10mm €28.11 £18.7451831 0.00005 0-0.1" €32.07 £21.38

2

PDG05M

Metric Dial IndicatorExpert Quality, reading 0-100 in metric graduations.Dial diameter 41mm. Display carton.

Stock Euro GBP £No. Graduations Range each each

51855 0.01mm 0-5mm €40.11 £26.74

3

PDTI0-40-0MM

Metric Dial IndicatorExpert Quality, reading 0-40-0 in metric graduations.Dial diameter 31mm. Supplied with two mounting lugsand contact tip wrench. Display packed.

Stock Euro GBP £No. Graduations each each

56291 0.01mm €56.19 £37.46

4

MB-LD

Magnetic StandFor use with dial gauges, etc. Powerful magnetic basewith on/off switch. Precision ground surface. Displaycarton.Dimensions: Base: 50 x 55 x 60mm. Overall height: 240mm.Main shaft: 180 x 12mm.

Stock Euro GBP £No. each each

19666 €42.54 £28.36

6

MB-LD FA

Magnetic StandFor use with dial gauges etc. Powerful magnetic basewith on/off switch. Fine adjustment screw for quick andaccurate settings. Precision ground surface. Displaycarton.Dimensions: Base: 50 x 55 x 60mm. Overall height: 240mm.Main shaft: 180 x 12mm.


37340 €40.17 £26.78

7

D62/PRO

150mm Quick Release Spring DividersExpert Quality, fine ground with black epoxy finish and"quick release" feature. Display packed.


64748 €9.63 £6.42

8

D62

150mm Spring DividersFine ground with adjustment by knurled wheel. Displaypacked.


34196 €8.22 £5.48

9

D61/PRO

150mm Quick Release Outside SpringCalipersExpert Quality, fine ground with black epoxy finish and"quick release" feature. Display packed.


64746 €9.63 £6.42

10

D61

150mm Outside Spring CalipersFine ground with adjustment by knurled wheel. Displaypacked.


34237 €8.22 £5.48

11

PDG01-025

Metric & Imperial Dial IndicatorExpert Quality, reading 0-100 in metric and imperialgraduations. Graduations 0-25mm x 0.01mm & 0-1" x0.001". Bezel 55mm with 8mm stem. Fitted with lugback. Display carton.

Stock Euro GBP £No. Graduations each each

65781 0.01mm/0.001" €56.19 £37.46

5

engineering tools

precision�


D60/PRO

150mm Quick Release Inside SpringCalipersExpert Quality, fine ground with black epoxy finish and"quick release" feature. Display packed.


64745 €9.63 £6.42

1

D60

150mm Inside Spring CalipersFine ground with adjustment by knurled wheel. Displaypacked.


39451 €8.22 £5.48

2

401

20 Blade Metric Screwpitch Gauge SetFolding leaves, individually stamped with accuratelyformed thread profiles. Range 0.4-7.0mm. Sold loose.


45458 €5.88 £3.92

3

407

30 Blade UNC-UNF Screwpitch Gauge SetFolding leaves, individually stamped with accuratelyformed thread profiles. American National Thread UNC-UNF, in the range 4-42TPI. Sold loose.


45440 €6.93 £4.62

4

553

52 Blade BSW/Metric Screwpitch GaugeSetFolding leaves, individually stamped with accuratelyformed thread profiles. Ranges 4-62BSW and 0.25-6.0mm. Sold loose.


45474 €9.48 £6.32

5

41

Engineers Precision SquaresManufactured to BS 939 Workshop Grade B forsquareness tolerance only.Solid steel stocks with hardened, tempered andfinely polished blades. The squareness of the bladeedges and the stock working face falls within±0.016mm/0.00064" tolerance. Display packed.

Stock Euro GBP £No. Size each each

34049 100mm €16.38 £10.9234065 150mm €20.70 £13.80

6

7324

200mm Engineers ScriberDouble ended hardened scriber with straight and 90°hardened points. Display packed.


34099 €5.19 £3.46

7

7325

125mm Engineers Pocket ScriberReversible scriber point. Body fitted with pocket clip.Display packed.


34104 €6.03 £4.02

8

PCS

150mm Carbide Tip Pocket ScriberPlated steel body with carbide tip and pocket clip. Formarking on hard and soft materials including steel andceramics. Display packed.


37349 €4.20 £2.80

9

PDG

Protractor with Depth GaugeGraduated 0-180° with depth gauge 0-150mm. Displaypacked.


37342 €22.11 £14.74

10

Stainless Steel RulesTo JIS (Japanese Industrial Standard)Expert Quality, precision rules manufactured fromhardened stainless steel matt chrome plated. The clearblack graduations of 1/2mm, mm, 1/2cm, cm and 1/64", 1/50",1/32", 1/20", 1/16", 1/10", 1/2", and inches on the reverse arepermanently etched for long service life. All rules arepacked into vinyl wallets with Stock No.12613 and12614 on display cards.

Stock Part Marked Euro GBP £No. No. Length each each

12613 SSR6 150mm & 6" €4.71 £3.1412614 SSR12 300mm & 12" €11.82 £7.8812615 SSR24 600mm & 24" €23.61 £15.7412616 SSR36 1000mm & 36" €45.66 £30.44

11

Steel RulesDouble sided with hang hole. Permanently etchedgraduations of cm/mm and inches, 1/8", 1/16", 1/32" and1/8". Display packed.

Stock Part Marked Rule Euro GBP £No. No. Length Width each each

59633 D17 150mm/6" 19mm €2.64 £1.7659641 D18 300mm/12" 30mm €4.86 £3.24

12

norman saysENGINEERS SQUAREOne of the few EngineersSquares that conform toBS939, workshop grade Bfor squareness.This guarantees the solidsteel stock will never be moreor less than 0.00064"from square. To all intents andpurposes... that’s square!

10TDS/A

10 piece Metric Tap and Die SetManufactured from high carbon steel. Display packed.Contents:• 4 metric coarse dies size: M3, M4, M5 and M6 - 1" O/D• 4 metric taper taps size: 3, 4, 5 and 6mm• die holder 1" O/D• ‘T’ type tap wrench capacity M3-M6


79201 €25.65 £17.10

1

section 8

general engineering�


37M

37 piece Metric Tap and Die SetManufactured from carbon steel. Taps and dies suitablefor cleaning and cutting threads on mild steel andaluminium. Supplied complete with the correct drill bitsfor tapping. Contents held in plastic insert within steelstorage case. Carton packed.Contents:• 8 metric dies size: 3 x 0.5, 3.5 x 0.6, 4 x 0.7, 5 x 0.8, 6 x 1.0, 8 x

1.25, 10 x 1.50 and 12 x 1.75 - 1" O/D• 8 metric taper taps: sizes as dies• 8 metric plug taps (bottoming): sizes as dies• tap wrench - American pattern 1/2" capacity• ‘T’ type tap wrench 1/4" capacity• die holder 1" O/D• 8 HSS twist drills size: 2.5, 2.9, 3.3, 4.2, 5.0, 6.8, 8.5 and

10.3mm• screwpitch gauge


79203 €70.62 £47.08

2

52MU

52 piece Combination Tap and Die Set -Metric, UNF and BSPManufactured from carbon steel. Taps and dies suitablefor cleaning and cutting threads on mild steel andaluminium. Supplied complete with the correct drill bitsfor tapping. Contents held in plastic insert within steelstorage case. Carton packed.Contents:• 7 metric dies size: 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1.0, 8 x 1.25, 10

x 1.5 and 12 x 1.75 - 1" O/D• 5 UNF dies sizes: 1/4, 5/16, 3/8, 7/16 and 1/2 - 1" O/D• 2 BSP dies size: 1/8" and 1/4" - 1" O/D• 14 metric taper taps: sizes as dies• tap wrench-American pattern 1/2" capacity• ‘T’ type tap wrench 1/4" capacity• die holder 1" O/D with guide• 13 HSS twist drills size: 2.5, 3.3, 4.2, 5.0, 5.5, 6.8, 6.9, 8.5, 8.8,

9.9, 10.3, 11.4 and 11.8mm• screwpitch gauge• screwdriver• centre punch• 5 screw extractors Nos. 1, 2, 3, 4 and 5


79204 €112.35 £74.90

3

75MM

75 piece Combination Tap and Die Set -Metric and BSPManufactured from carbon steel. Taps and dies suitablefor cleaning and cutting threads on mild steel andaluminium. Supplied with the correct drill bits fortapping. Contents held in plastic insert within steelstorage case. Carton packed.Contents:• 9 metric coarse dies size: 3 x 0.5, 3.5 x 0.6, 4 x 0.7, 4.5 x 0.75,

5 x 0.8, 6 x 1.0, 8 x 1.25, 10 x 1.5 and 12 x 1.75 - 1" O/D• 8 metric fine dies size: 2 x 0.25, 3 x 0.35, 4 x 0.5, 5 x 0.5, 6 x

0.75, 8 x 1.0, 10 x 1.25 and 12 x 1.25 - 1" O/D• BSP die 1/8" BSP• 17 metric taper taps: sizes as dies• 17 metric plug taps (bottoming): sizes as dies• taper tap 1/8" BSP• tap wrench-American pattern 1/2" capacity• ‘T’ type tap wrench 1/4" capacity• die holder 1" O/D with guide• 17 HSS twist drills size: 1.7, 2.5, 2.6, 2.9, 3.3, 3.5, 4.2, 4.5, 5.0,

5.3, 6.8, 7.0, 8.5, 8.8, 10.3, and 10.7mm• screwpitch gauge• screwdriver


79205 €160.50 £107.00

4

norman saysTo make these three (Item Nos.2, 3 and 4) the perfect workshop sets we've alsoincluded the correct tapping drills in our kits!

engineering tools



IT17

22 piece Combination Tap and Die Set -Metric and BSP in Insert TrayExpert Quality, manufactured from carbon steel. Tapsand dies suitable for cleaning and cutting threads onmild steel and aluminium. Packed in blow mould tray,ideal for tool cabinet arrangements or tool box storage.Contents:• 7 metric dies size: 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1.0, 8 x 1.25, 10

x 1.5 and 12 x 1.75 - 1" O/D• 2 BSP dies size: 1/8" and 1/4" BSP• 2 BSP taps size: 1/8" and 1/4" BSP• 7 metric plug taps (bottoming): sizes as dies• tap wrench-American pattern 1/2" capacity• die holder 1" O/D with guide• screwpitch gauge• screwdriver

Stock Euro GBP £No. Tray Dimensions per set per set

89344 260 x 140mm €46.95 £31.30

1

TDS-28

28 piece Metric Tap and HSS Drill SetTaps manufactured to DIN 371 and DIN 376; HSS drillsto DIN 338 and ISO 235/1All-round set comprising seven sizes of tap (taper,secondary and bottoming) and seven HSS drills. Packedin case with display sleeve.Contents:• Metric taps size: one each of size: M3, M4, M5, M6, M8, M10

and M12• Metric secondry taps size: one each of size: M3, M4, M5, M6,

M8, M10 and M12• Metric bottoming taps size: one each of size: M3, M4, M5,

M6, M8, M10 and M12• Metric HSS drills size: 2.5, 3.3, 4.2, 5.0, 6.8, 8.5 and 10.2mm


40891 €46.95 £31.30

2

D26MM/A

6 piece Circular Metric Dies and HolderSetPopular sizes of 1" O/D circular split dies and die holder.Ideal for clearing threads. Manufactured from carbonsteel with cut threads. Display packed.Contents: 6, 7, 8, 10 and 12mm dies plus 1" O/D die holder.


79197 €20.85 £13.90

3

D25-MM/A

5 piece Metric Hexagon Die Nut SetManufactured from carbon steel. Display packed.Contents: 6, 8, 10, 11 and 12mm.


79198 €16.86 £11.24

4

SKC2

Circular DiesManufactured from high carbon steel with accuratelycut coarse threads. Display packed.

Stock Size Euro GBP £No. O/D Coarse each each

44872 13/16" M2 €5.22 £3.4844880 13/16" M2.5 €5.22 £3.4844898 13/16" M3 €5.22 £3.4844905 13/16" M3.5 €5.22 £3.4844913 13/16" M4 €5.22 £3.4844939 13/16" M5 €5.22 £3.4845135 1" M6 €5.52 £3.6845151 1" M8 €5.52 £3.6845177 1" M10 €5.52 £3.6845193 1" M12 €5.67 £3.78

5

201TR

Die HoldersThree screw pattern. Display packed.

Stock Euro GBP £No. O/D each each

14445 13/16" €4.83 £3.2214446 1" €6.54 £4.36

6

4523MM/A

6 piece Metric Tap and Holder SetPopular sizes of carbon steel cut thread taps and ‘T’type holder. Display packed.Contents: M3.5, M4.0, M6.0, M8.0 and M10.0 taps plus ‘T’ type

tap holder.


79202 €19.23 £12.82

7

4522MM/A

10 piece Metric Hand Tap SetSecond taper taps manufactured from special highcarbon steel with accurately cut threads. Displaypacked.Contents: M3, M4, M5, M6, M7, M8, M9, M10, M11 and M12


79200 €15.24 £10.16

8

4522UNF/A

10 piece UNF Hand Tap SetSecond taper taps manufactured from special highcarbon steel with accurately cut threads. Displaypacked.Contents: M5, M6, M8, M10 and M12; 1/4, 5/16, 3/8, 7/16 and 1/2".


79199 €15.24 £10.16

9

product informationStock No.89344, Item No.1.See page 42 for information on the Draper ExpertModular Insert Tray System.

Schröder Ratchet ‘T’ Type TapWrenchesExpert Quality, manufactured by Schröder inGermany for Draper Tools. Ratchet action withforward/reverse operation and lock. Ideal for use inconfined areas. Two hardened jaws and polishedplated finish. Packed in vinyl wallet.*Sold loose.

Stock Part Capacity of Euro GBP £No. No. Square each each

45680 594 2-5mm €21.48 £14.3245698 595 4.6-8.0mm €27.72 £18.4880218 Y594 Sp. 2.5mm Jaws* €3.48 £2.3280219 Y595 Sp. 4.6-8.0mm Jaws* €3.48 £2.32

3

1B

Schröder 5 piece Screw Extractor SetExpert Quality, manufactured by Schröder inGermany for Draper Tools. Manufactured fromchrome vanadium steel with square drive ends.Packed in plastic case.Contents: one each of size: 1 (3-6mm), 2 (6-8mm), 3 (8-11mm), 4 (11-14mm) and 5 (14-18mm).*Sold loose


45856 Extractor Set €13.56 £9.0433070 No.1 Extractor* €2.94 £1.9634730 No.2 Extractor* €3.54 £2.3633071 No.3 Extractor* €3.87 £2.5833072 No.4 Extractor* €4.20 £2.8033073 No.5 Extractor* €4.53 £3.02

4

section 8�


SKC1

Taper and Plug Hand TapsManufactured from high carbon steel with accuratelycut coarse threads. Packed one of each, taper and plug,(bottoming) on display card.

Stock Euro GBP £No. Size Coarse per card per card

18072 M2 €7.38 £4.9218073 M2.5 €7.38 £4.9218074 M3 €7.38 £4.9218075 M3.5 €7.38 £4.9218076 M4 €7.38 £4.9218078 M5 €7.38 £4.9218079 M6 €8.55 £5.7018081 M8 €9.81 £6.5418082 M10 €11.61 £7.7418083 M12 €15.99 £10.66

1

101NS

Tap WrenchAmerican pattern, general purpose model with knurledhandles and enamelled finish. Display packed.

Stock Capacity Euro GBP £No. of Square each each

36305 2-6mm €10.08 £6.72

2

TTW

'T’ Type Tap WrenchesPolished body with knurled and polished barrel. Displaypacked.

Stock Capacity of Euro GBP £No. Square each each

45713 1.5-3.0mm €5.52 £3.6845721 2.5-5.0mm €8.13 £5.4245739 4.0-6.8mm €9.81 £6.54

5

TW

Bar Type Tap WrenchesHardened and tempered jaws, knurled handle withblack enamelled finish. Display packed.

Stock Capacity of Euro GBP £No. Square each each

37329 2.0-5.5mm €8.85 £5.9037330 3.0-10.0mm €10.44 £6.9637331 3.0-12.5mm €13.20 £8.8037332 3.5-16.5mm €20.70 £13.80

6

22TF

Metric Thread Restoring FileFor restoring and cleaning internal or external threads.Thread pitch: 080-100, 175-200, 125-150 and 250-300.Packed in clear plastic tube.


68703 €33.36 £22.24

7

Re-Threading ToolsExpert Quality, for cleaning out and cutting damagedor malformed threads in electrical boxes and othersimilar jobs. Manufactured from high speed steel withprecision ground threads and an impact resistant PVChandle. Display packed.

Stock Part Euro GBP £No. No. Size each each

37923 RT3.5 M3.5 x 0.6 pitch €5.88 £3.9237924 RT4 M4 x 0.7 pitch €5.88 £3.92

8

843

5 piece Screw Extractor SetCoarse spiral pattern with square drive end.Manufactured from carbon steel. Packed in plastic caseon display card.Contents: one each of size: 1 (3-6mm), 2 (6-8mm), 3 (8-11mm),4 (11-14mm) and 5 (14-18mm).


91261 €16.44 £10.96

10

Robert Schröder founded the company in 1948,specialising in the production of precision turnedparts. In the 1950’s the company diversified intothe production of screwdriver insert bits andother hand tools.Since that time Schröder has been at the forefrontof product development and innovation. SEDS-10

10 piece Metric Screw Extractor and HSSDrill SetHSS Drills manufactured to DIN 338 and ISO 235/1 Spiral pattern extractors with square drive endsmanufactured from quality steel. Packed in metal casewith display sleeve.Contents: Screw Extractors: one each of size 1 (3-6mm), 2 (6-8mm), 3(8-11mm), 4 (11-14mm) and 5 (14-18mm)HSS Drills: one each of size: 2, 3, 4, 6.6 and 7.5mm


40892 €31.29 £20.86

9

engineering tools

general engineering


HSF/SG

300mm Quick Change Soft Grip HacksawFrameExpert Quality, traditional pattern with an adjustableframe for 300mm blades. Facility on base of handleallows user to de-tension blade for a quick change. Softgrip handle. Supplied complete with a 300mm HSSblade. Display packed.


88606 €25.95 £17.30

14918

300mm Hacksaw FrameExpert Quality, traditional pattern with an adjustablechrome plated tubular frame for 300mm blades. Framehas two sets of blade spigots which allows straight or45° cutting. Can be used as a rod saw. Enamelledaluminium handle. Supplied complete with a 300mmHSS blade. Display packed.


31131 €20.52 £13.68

2

4916

300mm Hacksaw FrameGeneral purpose with an adjustable round steel tubebow frame for 250mm and 300mm blades. Shapeddiecast handle. Supplied complete with a 250mmcarbon steel blade. Sold loose.


18935 €19.89 £13.26

3

736/2

300mm Bi-Metal Hacksaw BladesConforms to BS 1919Expert Quality saw edge, manufactured from highspeed steel strip, electron beam welded to high qualitycarbon steel backing. Display packed two blades percard.Order number of cards required

Stock Euro GBP £No. TPI per card per card

19344 18 €4.92 £3.2819345 24 €4.92 £3.2838265 32 €4.92 £3.28

4 736/10

300mm Bi-Metal Hacksaw BladesConforms to BS 1919Expert Quality saw edge, manufactured from highspeed steel strip, electron beam welded to high qualitycarbon steel backing. Display packed ten blades percard.Order number of cards required

Stock Euro GBP £No. TPI per card per card

19347 18 €21.84 £14.5619348 24 €21.84 £14.5638266 32 €21.84 £14.56

5736/50

300mm Bi-Metal Hacksaw BladesConforms to BS 1919Expert Quality saw edge, manufactured from highspeed steel strip, electron beam welded to high qualitycarbon steel backing. Packed 50 blades to plastic box.Order number of boxes required

Stock Euro GBP £No. TPI per box per box

19349 18 €99.15 £66.1019350 24 €99.15 £66.1029807 32 €99.15 £66.10

6

735

300mm Flexible Carbon Steel HacksawBladesGeneral purpose blades for cutting mild steel or softnonferrous metal. Packed five blades - two 18 TPI andthree 24 TPI - on display card.Order number of cards required

Stock Euro GBP £No. per card per card

74118 €3.21 £2.14

7 737

300mm Tungsten Carbide Edge HacksawBladeBlade with tungsten carbide grit cutting edge forcutting ceramic tiles, glassware, marble and othermaterials. Fits all conventional hacksaw frames. Displaypacked.


19328 €4.53 £3.02

8

222JH

Junior HacksawPlated steel frame with finger guard. Suppliedcomplete with blade. Display packed.


49650 €1.86 £1.24

9

222JHPC

Junior Hacksaw with Powder CoatedFramePlated steel frame with powder coating and fingerguard. Supplied complete with blade. Display packed.


51996 €2.76 £1.84

10

1309

Mini SawSpecially designed for small cutting jobs on metal,wood, etc., where space is limited. Metal frame andshaped plastic handle to improve both operatorcomfort and control. Supplied complete with blade.Display packed.


12607 €4.14 £2.76

11

norman saysHACKSAW BLADESChoosing hacksaw blades:Always use the blades thathave as many teeth as possiblein contact with material e.g.angle iron = 32TPI,square section = 18TPIBlade teeth should always pointforward, or as shown by the chevrons on the blades. Our Bi-metal blades combine the longevity of HSSand the flexibility of carbon steel.

HACKSAW BLADE TEETH SHOULD ALWAYS POINTFORWARD - LOOK FOR THE DIRECTION OF THECHEVRONS ON OUR BLADES

section 8



JHF/P12

Mini Saw with Powder Coated FrameSpecially designed for small cutting jobs on metal,wood, etc., where space is limited. Powder coatedmetal frame with shaped impact resistant plastic handleto improve both operator comfort and control andblade tensioner. Supplied complete with blade. Displaypacked.


69292 €5.37 £3.58

1

312JH/EXP

150mm Junior Hacksaw BladesManufactured to BS6271Expert Quality, general purpose cutting blades withpinned ends. Will fit all junior hacksaw frames. Packedten blades on display card or in bags of 100 blades.Order number of cards/bags required

Stock Euro GBP £No. Blade Quantity per qty. per qty.

69305 10 blades per card €2.37 £1.5869306 100 blades per bag €22.02 £14.68

2

312JH

150mm Junior Hacksaw BladesGeneral purpose cutting blades with pinned ends. Willfit all junior hacksaw frames. Packed ten blades todisplay card.Order number of cards required

Stock Euro GBP £No. Blade Type per card per card

11237 Metal Cutting €2.01 £1.3439007 Wood Cutting €2.01 £1.34

3

DB4

3 piece Deburring and Chamfering ToolSetFor the removal of swarf and burrs from machinedcomponents leaving a clean hole. The 10.5mm diametercountersink is ideal when a chamfered edge is required.The deburring blade is suitable for use in steel,aluminium and plastic. Display packed.


71368 €22.44 £14.96

4

MPH SET

4 piece Mini Hook and Pick SetDesigned to ease the removal of ‘O’ rings, cotter pins,seals and bushes in various automotive and engineeringapplications. Blades stainless steel hardened andtempered with impact - resistant handles. Displaypacked.Contents: Awl, Clevis - pin remover, ‘L’ and ‘V’ hooks


35099 €11.16 £7.44

5

97

Octagonal Flat Cold ChiselsManufactured to DIN 7254B and GS Specifications.Expert Quality, manufactured from special air hardenedchrome vanadium steel for long life. The cutting edgesare accurately ground, with specially tempered heads.Sold loose.

Stock Overall Blade Euro GBP £No. Length Width each each

51538 100mm 10mm €7.86 £5.2451546 125mm 12mm €8.07 £5.3851554 150mm 15mm €8.55 £5.7051570 175mm 20mm €11.67 £7.78

8

95

Flat Cold ChiselsManufactured to DIN 6453Expert Quality, manufactured from special air hardenedchrome vanadium steel for long life. The cutting edgesare accurately ground, with specially tempered heads.Sold loose.


51588 100mm 16mm €7.41 £4.9451596 125mm 18mm €8.01 £5.3451603 150mm 20mm €8.67 £5.7851611 180mm 22mm €10.95 £7.3051629 200mm 25mm €11.79 £7.8651637 250mm 28mm €14.19 £9.46

9

109

Flat Cold Chisel with Hand GripManufactured to DIN 6453,Expert Quality, manufactured from special air hardenedchrome vanadium steel for long life. The cutting edgesare accurately ground, with specially tempered heads.With heavy moulded impact absorbing hand protectiongrip. Sold loose.


11152 300mm 32mm €22.23 £14.82

10

104

Splitting ChiselExpert Quality, special air hardened chrome vanadiumsteel for long life. The cutting edge is accuratelyground, with specially tempered head. Sold loose.


13278 240mm 25mm €14.10 £9.40

11

norman saysENGINEERS COLD CHISELSUnlike builders cold chisels,which are designed to beused on brick and stone,these engineers chisels andpunches are made of chromevanadium steel for prolongeduse on metal. The head is separatelyhardened to avoid excessive‘mushrooming’, although this is a necessary featureto avoid chipping.

LS

Sets of Letter StampsSets of 26 capital letter stamps manufactured from alloytool steel, hardened and tempered with a black finish.Packed in plastic box.

Stock Euro GBP £No. Letter Height per set per set

37333 1/8" €21.27 £14.1837334 3/16" €32.76 £21.8437335 1/4" €34.44 £22.96

6

NS

Sets of Number StampsSets of numbers 0-9 manufactured from alloy tool steel,hardened and tempered with a black finish. Packed inplastic box.

Stock Euro GBP £No. Number Height per set per set

37336 1/8" €8.22 £5.4837337 3/16" €11.40 £7.6037338 1/4" €13.05 £8.70

7

engineering tools



119

Octagonal Parallel Pin PunchesExpert Quality, special air hardened chrome vanadiumsteel for long life. The tips are accurately ground, withspecially tempered heads. Sold loose.

Stock Overall Tip Euro GBP £No. Length Diameter each each

51645 150mm 2.0mm €5.85 £3.9051653 150mm 2.5mm €5.85 £3.9051661 150mm 3.0mm €5.85 £3.9051679 150mm 3.5mm €5.85 £3.9051687 150mm 4.0mm €5.85 £3.9051695 150mm 5.0mm €5.85 £3.9051702 150mm 6.0mm €5.85 £3.9051710 150mm 8.0mm €6.21 £4.14

1

119/5

5 piece 150mm OctagonalParallel Pin Punch SetExpert Quality, special air hardened chrome vanadiumsteel for long life. The tips are accurately ground, withspecially tempered head. Display packed.Contents: Five pin punches with tip diameters of 3.0, 3.5, 4.0,5.0 and 6.0mm.


13041 €27.69 £18.46

2

119K

6 piece 150mm Octagonal Parallel PinPunch SetExpert Quality, special air hardened chrome vanadiumsteel for long life. The tips are accurately ground, withspecially tempered head. Supplied complete in steelmagazine type case. Carton packed.Contents: Six pin punches with tip diameters of 2, 3, 4, 5, 6 and8mm.


74712 €50.16 £33.44

3

99L

Long Taper PunchesExpert Quality, engineer’s pattern long taper punches,manufactured from high carbon steel hardened andtempered. Display packed.


13415 200mm 3mm €8.16 £5.4413416 225mm 5mm €9.27 £6.1813417 250mm 6mm €11.52 £7.6813418 300mm 8mm €14.94 £9.96

4

100HB

Octagonal Centre PunchesManufactured to DIN 6458Expert Quality, manufactured from special air hardenedchrome vanadium steel for long life. The tips areaccurately ground with specially tempered heads. Soldloose.


51752 120mm 4mm €3.42 £2.2851760 120mm 5mm €3.57 £2.3851778 150mm 5mm €5.34 £3.56

5

5HB

5 piece Chisel and Punch SetExpert Quality, manufactured from special air hardenedchrome vanadium steel for long life. The cutting edgesand tips are accurately ground, with specially temperedheads. Packed in plastic holder on display card.Contents:• flat cold chisel: 20 x 150mm• 2 parallel pin punches: 3 x 150 and 5 x 150mm• taper pin punch: 3 x 120mm• centre punch: 4 x 120mm


13042 €32.97 £21.98

6

GT807

125mm Automatic Centre PunchExpert Quality, heavy duty spring-loaded hardenedsteel point. Adjustable striking force. Display packed.


13612 €10.83 £7.22

7

GT808

125mm Automatic Centre PunchLight duty model. High grade steel tip and hardenedpoint. Chrome plated knurled brass body. Displaypacked.


14158 €10.32 £6.88

8

CP4

4 piece Chisel and Punch SetChrome vanadium steel hardened and tempered with achemically blacked finish and plastic grips. Displaypacked.Contents:• cold chisel: 13 x 150mm• parallel pin punch: 3 x 150mm• taper pin punch: 5 x 150mm• centre punch: 10 x 150mm


18161 €12.33 £8.22

9

CP7

7 piece Chisel and Punch SetChrome vanadium steel hardened and tempered with achemically blacked finish and plastic grips. Supplied instorage roll. Display packed.Contents:• 3 cold chisels: 10, 13 and 16 x 150mm• 2 taper punches: 3 and 4 x 150mm• centre punch: 10 x 150mm• parallel pin punch: 4 x 150mm


13038 €19.02 £12.68

10

norman says

Striking a chisel increases its hardness,this is called ‘work’ hardening. To compensate forthis, Draper additionally ‘softens’ the striking faceslightly during manufacture. That’s why a good chisel‘mushrooms’

section 8



CP12

12 piece Chisel and Punch SetChrome vanadium steel hardened and tempered with achemically blacked finish and plastic grips. Supplied instorage roll. Display packed.Contents:• 4 cold chisels: 13 x 150,

16 x 180, 19 x 190 and22 x 205mm

• taper punch: 5 x 255mm• 2 parallel pin punches:

4 and 6 x 150mm• 2 parallel taper pin punches:

3 and 6 x 150mm• centre punch: 6 x 150mm• point chisel: 150mm long• cross cut chisel: 150mm long


13039 €33.66 £22.44

1

622

100mm Cupped NailsetsSquare section striking head with knurled body andpolished end. Manufactured from carbon steelhardened and tempered. Display packed.

Stock Euro GBP £No. Tip Diameter each each

84498 2.5mm €2.22 £1.4884480 3.0mm €2.22 £1.48

2

622/4

4 piece Set of 100mm Cupped NailsetsSquare section striking head with knurled body andpolished ends. Manufactured from carbon steelhardened and tempered. Display packed.Contents: 1.5, 2.5, 3.0 and 5.0mm.


35480 €6.39 £4.26

3

623

100mm Centre PunchesSquare section striking head with knurled body andpolished ends. Manufactured from carbon steelhardened and tempered. Display packed.


84464 3mm €2.10 £1.4084456 4mm €2.10 £1.4010750 5mm €2.10 £1.40

4

622/3/PP

3 piece 125mm Nailset, Centre Punch andParallel Pin Punch SetExpert Quality, comprising a cupped nailset and centrepunch, both with tip diameters of 3mm and 5/16"parallel pin punch. Chrome vanadium steel hardenedand tempered with sandblasted finish. Display packedin plastic holder.


72041 €7.29 £4.86

5

622/623

2 piece 100mm Nailset and Centre PunchSetComprising a cupped nailset and centre punch, bothwith tip diameters of 3mm and overall lengths of100mm. Display packed.


13509 €3.21 £2.14

6

HP6

6 piece Hollow Punch SetManufactured from quality carbon steel hardened,tempered and enamel painted. Specifically designed tocut clean holes in leather, paper, plastic, wood, etc.Supplied in tool roll. Display packed.Sizes: 3/16, 1/4, 5/16, 3/8, 7/16 and 1/2".


25993 €16.05 £10.70

7

55P

200mm Parallel Pin PunchesLong pattern with extra long 90mm parallel drive.Display packed.


19675 1/8" €3.66 £2.4419676 3/16" €3.66 £2.4419677 1/4" €3.66 £2.4419678 5/16" €3.66 £2.4419679 3/8" €3.66 £2.44

8

5P

5 piece Parallel Pin Punch SetLong pattern 200mm overall length with extra long90mm parallel drive. Comprising 1/8, 3/16, 1/4, 5/16 and 3/8"diameter punches. Display packed in storage wallet.


19674 €17.37 £11.58

9

HV100

36mm Hand ViceHand held vice for the secure clamping of componentparts prior to grinding, drilling, etc. Carton packed.

Stock Euro GBP £No. Jaw Opening each each

30785 19mm €8.70 £5.80

10

Bench VicesQuality cast iron body with steel screw and handle.Hardened carbon steel interchangeable jaws. Cartonpacked

Stock Part Euro GBP £No. No. Jaw Width each each

31092 BV100 100mm €62.16 £41.4431093 BV125 125mm €80.25 £53.5031094 BV150 150mm €111.99 £74.66

11

product locatorA dowel pin punch setfor brakes is shownon page 67

�


1709T

75mm Bench ViceCast iron with serrated curved jaws. Bench clampingscrew 40mm capacity manufactured from zinc platedcarbon steel. Display packed. Display carton.

Stock Jaw Euro GBP £No. Opening each each

38267 58mm €22.50 £15.00

1

Soft Jaws for Engineers VicesExpert Quality, aluminium with heavy duty soft rubberface to prevent marking. Supplied complete with heavyduty magnets which stick to the face of the vice jaws.Display packed.

Stock Part Euro GBP £No. No. Size each each

89717 SJ100 100mm €5.49 £3.6689718 SJ150 150mm €7.53 £5.02

8

BV2

Engineers Bench VicesGood quality grey cast iron with trapezoidal threadleadscrew. Hardened carbon steel interchangeable jaws.Carton packed.

Stock Euro GBP £No. Jaw Width each each

58179 100mm €81.15 £54.1058187 150mm €150.87 £100.58

6

BV-SB

Swivel Bases for Bench VicesSwivel bases for use with Bench Vices Stock Nos.58178,58179 and 58187. Manufactured from good qualitygrey cast iron with three fixing legs and two clampingblocks. Sold loose.

Stock Euro GBP £No. For Vice each each

59280 For Stock No.58179 €30.03 £20.0259282 For Stock No.58187 €37.62 £25.08

7

ANV

4.5kg AnvilSingle bick cast iron anvil, bolt down pattern. Grey castiron. Oblong working surface 120 x 65mm. Displaycarton.


35481 €21.69 £14.46

9

three positions for manyapplications

DPV100/3

3 Way 100mm Drill Press ViceExpert Quality, with three accurately groundmounting surfaces for drilling holes at 90°. Precisionground jaws. Carton packed.


64585 85mm €76.68 £51.12

5

end

side

flat

VAC 10

75mm Vacuum ViceVersatile swivel vice with powerful suction base whichfixes to any smooth surface. Swivelling head allowsmany varied positions. V grooved jaws for holdingcylindrical and irregular shapes. Supplied withremovable soft rubber safety jaw covers. Display carton.


20560 70mm €68.70 £45.80

2

'Quick Action' Drill Press VicesManufactured from cast aluminium with hardenedjaws. 'Quick action' release at rear of vice allows jaws tobe opened quickly. Stock No. 40391 is additionallysupplied with rubber protection pads. Display carton.* Capacity increased to 99mm without rubber jaw pads

Stock Part Jaw Jaw Euro GBP £No. No Width Opening each each

40390 DPV70/B 70mm 67mm €18.75 £12.5040391 DPV95/B 95mm 93mm* €31.29 £20.86

3

Stock No. 40390

Drill Press VicesManufactured from cast iron with fully hardened jaws.Chrome plated handle and lead screw. Display carton.

Stock Part Jaw Jaw Euro GBP £No. No. Width Opening each each

54634 DPV75 75mm 80mm €17.64 £11.7654635 DPV100 100mm 90mm €22.47 £14.9854636 DPV120 120mm 118mm €28.11 £18.7454637 DPV145 145mm 140mm €34.53 £23.02

4

product locatorGeneral engineers files areshown on pages 330-332

section 8



4885/10D

10 piece 140mm Diamond Needle File SetExpert Quality set, chromium plated and diamondcoated 150 grit. Comprising flat parallel, flat tapered,round, half round, square, three square, oval, crossing,barrette and knife with moulded plastic handles.Packed in handy ‘see-through’ plastic case. Displaypacked.


36326 €32.07 £21.38

1

4883/6C

6 piece 140mm Needle File SetSet comprising flat parallel, flat taper, half round,round, square and three square files with mouldedplastic handles. Display packed in plastic storage wallet.


36324 €6.39 £4.26

2

4884/12C

12 piece 140mm Needle File SetSet comprising flat hand, flat taper, joint, taper round,half round, square, three square, oval, crossing, crochet,barrette and knife with moulded plastic handles.Display packed in plastic storage wallet.


36325 €11.22 £7.48

3

NF/SET

6 piece 140mm Needle File SetNo. 2 cut files, hardened and tempered with sandblasted finish. Two-tone soft-grip handles. Comprisingflat parallel, flat taper, half round, three square, squareand round files. Display packed in plastic storage wallet.


63635 €6.39 £4.26

4

563B

110mm Swiss File HandleFor use with needle files. Knurled hand-tightened chuckretains file in handle. Display packed.


29523 €3.57 £2.38

5

563A

Plastic File HandlesFor use with Draper files and other manufacturers files.Display packed.

Stock Euro GBP £No. Length each each

29524 80mm €0.81 £0.5429525 93mm €0.87 £0.5829526 110mm €0.96 £0.64

6

563

Hardwood File HandlesSmoothly finished with steel ferrule. For use withDraper files and other manufacturers files. Sold loose.


33487 75mm €1.11 £0.7433502 100mm €1.23 £0.8233528 125mm €1.47 £0.9833544 150mm €1.74 £1.16

7

160mm Second Cut Needle FilesFor intricate work, Manufactured from high carbon/chrome steel, hardened and tempered to HRC 62-64 files. Sold in boxes of 12 files.

Stock Part Euro GBP £Cut TypeNo. No. per box per box

63391 NF Second Flat Parallel €9.63 £6.42

63392 NF Second Flat Taper €9.63 £6.42

63393 NF Second Half Round €9.63 £6.42

63394 NF Second Three Square €9.63 £6.42

63395 NF Second Square €9.63 £6.42

63396 NF Second Round €9.63 £6.42

engineering tools



HF/1

Hand Files - Bastard CutManufactured in accordance with BS498:1990With one safe edge. Carbon chrome steel hardened andtempered with rust preventative finish and dipped inrust preventative oil. Sold in boxes without handles.Order number of boxes required

Stock Box Euro GBP £No. Length Quantity per box per box

60202 150mm (6") 12 €30.48 £20.3260203 200mm (8") 12 €38.28 £25.5260204 250mm (10") 12 €52.53 £35.0260205 300mm (12") 6 €34.80 £23.20

1

HF/2

Hand Files - Second CutManufactured in accordance with BS498:1990With one safe edge. Carbon chrome steel hardened andtempered with rust preventative finish and dipped inrust preventative oil. Sold in boxes without handles.Order number of boxes required


60207 150mm (6") 12 €33.48 £22.3260208 200mm (8") 12 €43.05 £28.7060209 250mm (10") 12 €57.15 £38.1060210 300mm (12") 6 €38.43 £25.62

2

HF/3

Hand Files - Smooth CutManufactured in accordance with BS498:1990With one safe edge. Carbon chrome steel hardened andtempered with rust preventative finish and dipped inrust preventative oil. Sold in boxes without handles.Order number of boxes required


60212 150mm (6") 12 €35.37 £23.5860213 200mm (8") 12 €45.39 £30.2660214 250mm (10") 12 €60.99 £40.6660215 300mm (12") 6 €39.69 £26.46

3

HRF/1

Half Round Files - Bastard CutManufactured in accordance with BS498:1990Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.Sold in boxes without handles.Order number of boxes required


60217 150mm (6") 12 €41.91 £27.9460218 200mm (8") 12 €58.05 £38.7060219 250mm (10") 12 €71.34 £47.5660220 300mm (12") 6 €46.74 £31.16

4

HRF/2

Half Round Files - Second CutManufactured in accordance with BS498:1990Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.Sold in boxes without handles.Order number of boxes required


60222 150mm (6") 12 €47.07 £31.3860223 200mm (8") 12 €61.02 £40.6860224 250mm (10") 12 €80.37 £53.5860225 300mm (12") 6 €50.58 £33.72

5

HRF/3

Half Round Files - Smooth CutManufactured in accordance with BS498:1990Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.Sold in boxes without handles.Order number of boxes required


60227 150mm (6") 12 €49.65 £33.1060228 200mm (8") 12 €63.63 £42.4260229 250mm (10") 12 €87.18 £58.1260230 300mm (12") 6 €53.49 £35.66

6

FF/1

Flat Files - Bastard CutManufactured in accordance with BS498:1990Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.Sold in boxes without handles.Order number of boxes required


60232 150mm (6") 12 €31.20 £20.8060233 200mm (8") 12 €37.83 £25.2260234 250mm (10") 12 €51.99 £34.6660235 300mm (12") 6 €34.68 £23.12

7

FF/2

Flat File - Second CutManufactured in accordance with BS498:1990Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.Sold in boxes without handles.Order number of boxes required


60237 150mm (6") 12 €32.85 £21.9060238 200mm (8") 12 €43.53 £29.0260239 250mm (10") 12 €57.21 £38.1460240 300mm (12") 6 €38.91 £25.94

8

FF/3

Flat Files - Smooth CutManufactured in accordance with BS498:1990Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.Sold in boxes without handles.Order number of boxes required


60242 150mm (6") 12 €35.43 £23.6260243 200mm (8") 12 €45.15 £30.1060244 250mm (10") 12 €61.02 £40.6860245 300mm (12") 6 €39.51 £26.34

9

FILE PROFILES

▼ ▼ ▼

norman saysFILESThis range of high quality files, are suitable for the industrialengineer. The files are manufactured from good quality carbon chrome steel correctlyhardened and tempered, conforming to the recognised British standard.Always use the correct file for the job in hand - bastard cut for fast metal removal,second cut for general filing and smooth cut for a fine finish.Needle files are used for detailed work - depending on the type of file they can be usedfor metal or wood to remove burrs, irregularities, enlarging holes or slots and forsharpening saws.

safety informationNever use a file without a handle. Suitable handlesare shown on page 329

FLAT FILESHALF ROUNDFILES

HAND FILES

section 8



RF/1

Round Files - Bastard CutManufactured in accordance with BS498:1990Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.Sold in boxes without handles.Order number of boxes requiredStock Box Euro GBP £No. Length Quantity per box per box

60248 150mm (6") 12 €31.11 £20.7460249 200mm (8") 12 €36.03 £24.0260250 250mm (10") 12 €46.20 £30.80

1

RF/2

Round Files - Second CutManufactured in accordance with BS498:1990Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.Sold in boxes without handles.Order number of boxes requiredStock Box Euro GBP £No. Length Quantity per box per box

60254 150mm (6") 12 €35.55 £23.7060255 200mm (8") 12 €41.01 £27.3460256 250mm (10") 12 €51.39 £34.26

2

RF/3

Round Files - Smooth CutManufactured in accordance with BS498:1990Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil. Sold in boxes without handles.Order number of boxes requiredStock Box Euro GBP £No. Length Quantity per box per box

60258 150mm (6") 12 €35.55 £23.7060259 200mm (8") 12 €45.36 £30.2460260 250mm (10") 12 €54.45 £36.30

3

CSFP

150mm Chainsaw File (display packed)Manufactured in accordance with BS498:1990Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.Display packed.

Stock Euro GBP £No. Diameter each each

60766 4mm (5/32") €2.34 £1.56

4

CSF

Chainsaw Files (sold loose)Sold in boxes of 12 without handles.Order number of boxes requiredStock Euro GBP £No. Length Diameter per box per box

60296 150mm (6") 4mm (5/32") €22.05 £14.7060297 200mm (8") 5mm (3/16") €22.23 £14.8260298 200mm (8") 5.5mm (7/32") €22.23 £14.82

5

DESFP

175mm (7") Double Ended Saw File(display packed)Manufactured in accordance with BS498:1990For sharpening non hardpoint saw teeth. Suppliedcomplete with handle (unassembled). Carbon chromesteel hardened and tempered with rust preventativefinish and dipped in rust preventative oil. Displaypacked.


60312 €3.69 £2.46

6

DESF

175mm (7") Double Ended Saw File (soldloose)Sold in boxes of 12 with handles.Order number of boxes requiredStock Euro GBP £No. per box per box

60311 €35.70 £23.80

7

CR

300mm (12") Half Round Cabinet RaspManufactured in accordance with BS498:1990Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.Sold in boxes of 6 without handles.Order number of boxes requiredStock Box Euro GBP £No. Quantity per box per box

60304 6 €50.67 £33.78

8

FOP

Farmers Own Files (display packed)Manufactured in accordance with BS498:1990Single cut files to give fine/sharp finish to garden tools.Carbon chrome steel hardened and tempered with rustpreventative finish and dipped in rust preventative oil.Self handled with hang hole. Display packed.


60306 200mm (8") €3.99 £2.6660308 250mm (10") €5.61 £3.74

9

FO

Farmers Own Files (sold loose)Sold loose in boxes of 12.Order number of boxes requiredStock Euro GBP £No. Length per box per box

60305 200mm (8") €44.85 £29.9060307 250mm (10") €56.07 £37.38

10

product informationFILES - TRANSIT DAMAGEAs a result of potential damage to file teeth duringtransit, we regret that file quantities in boxes(usually 12) are fixed and cannot be broken down

FILE PROFILES

▼ ▼ ▼

HALF ROUNDCABINET FILES

CHAINSAWFILES

ROUND FILES

FILE PROFILES

▼ ▼

FARMERSOWN FILES

DOUBLEENDED SAWFILES

safety informationNever use a file without a handle. Suitable handlesare shown on page 329

engineering tools



8106A/3

3 piece 200mm Soft Grip Engineers FileSetSet of three second cut files. Supplied complete withsoft grip handles with hang hole. Comprising flat, halfround and round files. Display packed.Contents: flat, half round and round files


75326 €17.19 £11.46

1

8106A/4

4 piece 200mm Soft Grip Engineers FileSetSet of four second cut files. Supplied complete with softgrip handles with hang hole. Display packed.Contents: flat, half round, round and three square files.


75327 €22.47 £14.98

2

8106A/8

8 piece 200mm Soft Grip Engineers Fileand Rasp SetSupplied complete with soft grip handles with hanghole. Display packed.Contents: flat, hand, half round, round, square, three square

files, half round rasp and round rasp.


75328 €38.49 £25.66

3

FCB

210mm File Cleaning BrushFor the cleaning of files, etc. Filled with file card steelwire 360 points per square inch. Filled Length: 90mm.Beechwood handle. Display packed.


34477 €3.75 £2.50

4

C200F

200mm Carbide Grit Flat FileCombination coarse and fine carbide grit file withplastic handle. Suitable for forming or removing stockfrom most materials including plastics, fibreglass,plaster, laminates, nonferrous metals, etc. Displaypacked.NB: This file is not suitable for use on ferrous metals.


29388 €12.69 £8.46

5

C160HR

160mm Half Round Carbide Grit FileMedium carbide grit file with plastic handle. Suitablefor forming or removing stock from most materialsincluding plastics, fibreglass, plaster, laminates,nonferrous metals, etc. Display packed.NB: This file is not suitable for use on ferrous metals.


29390 €9.99 £6.66

6

C160R

160mm Round Carbide Grit FileMedium carbide grit file with plastic handle. Suitablefor forming or removing stock from most materialsincluding plastics, fibreglass, plaster, laminates,nonferrous metals, etc. Display packed.NB: This file is not suitable for use on ferrous metals.


29391 €10.08 £6.72

7

WFS4

4 piece 100mm Warding File SetSet comprising flat parallel, round, square and threesquare files, all with plastic handles. Display packed.


14184 €5.43 £3.62

8

WFS6

6 piece 100mm Warding File SetSet comprising flat parallel, flat taper, round, square,three square and half round files, all with plastichandles. Display packed.


14185 €8.85 £5.90

9

Stock Part Euro GBP £No. No. Type, description each each

75317 8106A Engineers, flat €5.22 £3.48

75318 8106A Engineers, hand €5.22 £3.48

75319 8106A Engineers, half round €6.93 £4.62

75320 8106A Engineers, round €5.22 £3.48

75321 8106A Engineers, square €6.93 £4.62

75322 8106A Engineers, three square €6.03 £4.02

75323 8106A Cabinet, half round rasp €7.71 £5.14

75324 8106A Cabinet, round rasp €7.41 £4.94

75325 8106A Cabinet, flat rasp €7.56 £5.04

200mm Soft Grip Engineers Files and RaspsComplete with soft grip handle and hang hole. Display packed.

section eight engineering - niteh eight engineering ... 52380 pvc300f 0-300mm/12" €60.99...

Documents