section 8 - ultra & ultra-c parts catalogue

PART # DESCRIPTION PAGE

903U MOUNTING KIT WITH TANK 801-802905U MOUNTING KIT WITHOUT TANK 803-804902U MOUNTING KIT - CRADLE, BLOCKS & HINGE 805-806

206U UPPER TRUNNION BLOCK KIT 807-808631U-632U TRUNNION BLOCK BRACKET KIT 809-810

201U DUMP BODY CRADLE KIT 811-812

185U DUMP BODY HINGE KIT 813-814

230A-U OIL TANK KIT 815-816900U HYDRAULIC CONNECTION KIT 817-818

500U @ 502U MAILHOT TELESCOPIC CYLINDERS 819-820300A SINGLE ACTING (TWO STAGES) ELECTRIC HYDRAULIC POWER PACK 821-822

151U MANUAL TARP ROLLER KIT WITH MESH 823-824628U ULTRA FRONT OPTIONS 825-826

911U WIRING HARNESS KIT 827-828810U MANUAL OPENING TAILGATE KIT 829-830708U DOUBLE ACTING TAILGATE LATCH BOLSTER KIT 831-832

800U-S ULTRA REPLACEMENT SIDES & ACCESSORIES 833-834800U-T ULTRA REPLACEMENT TAILGATES & ACCESSORIES 835-836

750U HOOK LIFT ROLLERS 837-838

269U ULTRA BODY PROP KIT 839-840

SECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE

MOUNTING KITS & TANKS

TRUNNION BLOCKS

PARTS AND ACCESSORIES OCTOBER 2012

REAR HINGE

HYDRAULICS

CRADLE KITS

CYLINDERS & POWER PACK

FRONT OPTIONS

REAR OPTIONS

BOTTOM OPTIONS

ROLLERS

8-TABLE OF CONTENTS 08/10/2012

TITLE:PART:

903U14/06/2012

MOUNTING KIT WITH TANK

PART 201UDUMP BODYCRADLE KIT PART 206U

UPPER TRUNNIONBLOCK KIT

PART 900UHYDRAULIC

CONNECTION KIT

PART230A-U

OIL TANKKIT

PART 185UDUMP BODYHINGE KIT

TOTAL WEIGHT OF INSTALLATION KIT (LBS): 8T 24T 35T 154 267 341

54

3

21

ITE

M

DESCRIPTION # BEAU-ROC PRICE

CRADLE & BLOCKS & HINGE & TANK 8T 903-06-08TCRADLE & BLOCKS & HINGE & TANK 8T (WITH SUBFRAME) 903U-06-08T

CRADLE & BLOCKS & HINGE 24T, TANK 24-35T 903-20-24TCRADLE & BLOCKS 24T, HINGE 35-45T, TANK 24-35T 903-20-24T-1

35T CRADLE & BLOCKS 35T, HINGE 35-45T, TANK 24-35T 903-30-35T-1

1 DUMP BODY CRADLE KITS PART 201U p.812- HARDWARE KIT 201-(202)-1 HW-201-1 p.135

2 UPPER TRUNNION BLOCK KITS PART 206U p.808- HARDWARE KIT 206 HW-201-2A p.135

3 HYDRAULIC CONNECTION KITS PART 900U p.818

4 OIL TANK KITS PART 230A-U p.816- HARDWARE KIT 230A HW-230A-1 p.135

5 DUMP BODY HINGE KITS PART 185U p.814

PART # 903U - MOUNTING KIT WITH TANK


24T

8T

Part # 903U 08/10/2012 802

TITLE:PART:

905U210/06/2012

MOUNTING KIT WITHOUT TANK


PART 900UHYDRAULIC

CONNECTION KIT

PARTS 201UDUMP BODYCRADLE KIT

PART 206UUPPER TRUNNION

BLOCK KIT


1

2

3

4

ITE

M


CRADLE & BLOCKS & HINGE 8T, NO TANK 905-06-08TCRADLE & BLOCKS & HINGE 8T (WITH SUBFRAME) - NO TANK 905U-06-08T

CRADLE & BLOCKS & HINGE 24T, NO TANK 905-20-24TCRADLE & BLOCKS 24T, HINGE 35-45T, NO TANK 905-20-24T-1

35T CRADLE & BLOCKS 35T, HINGE 35-45T, NO TANK 905-30-35T-1


2 UPPER TRUNNION BLOCK KITS PART 206U p.808- HARDWARE KIT 206 HW-206-1 p.135

3 HYDRAULIC CONNECTION KITS PART 900U p.818


PART # 905U - MOUNTING KIT WITHOUT TANK


24T

8T

Part # 905U 08/10/2012 804

TITLE:PART:

902U21/06/2012

MOUNTING KIT - CRADLE,BLOCKS & HINGE


PART 201UDUMP BODYCRADLE KIT

PART 206UUPPER TRUNNION

BLOCK KIT


1

2

3

ITE

M


CRADLE, BLOCKS & HINGE 8T 902-06-08TCRADLE, BLOCKS & HINGE 8T (WITH SUBFRAME) 902U-06-08T

CRADLE, BLOCKS & HINGE 24T 902-20-24TCRADLE, BLOCKS 24T & HINGE 35-45T 902-20-24T-1

35T CRADLE, BLOCKS 35T & HINGE 35-45T 902-30-35T-1


2 UPPER TRUNNION BLOCK KITS PART 206U p.808- HARDWARE KIT 206 HW-206-1 p.135


PART # 902U - MOUNTING KIT - CRADLE, BLOCKS & HINGE


8T

24T

Part # 902U 08/10/2012 806

TITLE:PART:

206U14/06/2012

UPPER TRUNNION BLOCK KIT

8TWEIGHT: 19 LBS./ SET

A


B


C

1

TEMPERED STEEL BUSHINGS(24T & UP)

ITE

M


A UPPER TRUNNION BLOCK KIT 8T 206-06-08T

B UPPER TRUNNION BLOCK KIT 24T 206-20-24T

C UPPER TRUNNION BLOCK KIT 35T 206-30-35T

COMMON PARTS

1 GREASE FITTING 5/16" DRIVE TYPE GF-3125-DT

- HARDWARE KIT 206 HW-206-1 p.135

PART # 206U - UPPER TRUNNION BLOCK KIT


Part # 206U 08/10/2012 808

TITLE:PART:

631U632U14/06/2012

TRUNNION BLOCK BRACKET KIT


A

24-55TWEIGHT: 25 LBS./ SET

B

24-45TWEIGHT: 61 LBS

D8T

WEIGHT: 59 LBS

C

ITE

M


A TRUNNION BLOCK BRACKET KIT 8T 631U-06-08T

B TRUNNION BLOCK BRACKET KIT 24-55T 631-24-50T

TRUNNION BLOCK BRACKET KIT 8T (FLAT FRONT) 632-06-08TTRUNNION BLOCK BRACKET KIT 8T (INSTALLED) (FLAT FRONT) 632-06-08TI

TRUNNION BLOCK BRACKET 24-45T (FLAT FRONT) 632-24-45TTRUNNION BLOCK BRACKET 24-45T (INSTALLED) (FLAT FRONT) 632-24-45TI

Notes(C-D): with dump body purchase when installed at the factory.

PART # 631U-632U - TRUNNION BLOCK BRACKET KIT


D

C

Part # 631U-632U 08/10/2012 810

A

TITLE:PART:

201U14/06/2012

DUMP BODY CRADLE KIT

24TWEIGHT: 90 LBS

B

35TWEIGHT: 133 LBS

c

8TWEIGHT: 54 LBS.

A

1

5

6

HW-201-2A(8-35T)

2

4

3

8

7

DISCONTINUED PARTS

(35T)

(24T)

ITE

M


A DUMP BODY CRADLE KIT 8T 201-06-08T1 REPLACEMENT BRACE - BLOCK 8T 201-06-08-01X

B DUMP BODY CRADLE KIT 24T 201-20-24T2 REPLACEMENT BRACE - BLOCK 24T (NEW) 201-20-24-01X

C DUMP BODY CRADLE KIT 35T 201-30-35T3 REPLACEMENT BRACE - BLOCK 35T (NEW) 201-30-35-01X

COMMON PARTS

4 ANGLE IRON KIT 8-35T (15" LONG, 4" X 4" X 3/8") 201-24-35-02

- HARDWARE KIT 201-(202)-1 HW-201-1 p.135

5 HARDWARE KIT 201-2A (8-35T) HW-201-2A p.135


DISCONTINUED PARTS

7 REPLACEMENT BRACE - BLOCK 24T (OLD) 201-20-24-01X

8 REPLACEMENT BRACE - BLOCK 35T (OLD) 201-30-35-01X

PART # 201U - DUMP BODY CRADLE KIT


Part # 201U 08/10/2012 812

TITLE:PART:

185U20/06/2012

DUMP BODY HINGE KIT

35-45TWEIGHT: 100 LBS.

D

24TWEIGHT: 68 LBS.

C

8TWITH C-CHANNELS

WEIGHT: 21 LBS.

B

COMPRISEDOF:

7

8

9

5

6

4

1

2

3

10

TEMPERED STEEL PARTSALL PINS HINGES (35T & UP)

9

8TWITH LONG SILLS

WEIGHT: 24 LBS.

A

11

31 1/4"

3

2

1

31"

ITE

M


A DUMP BODY HINGE KIT 8T 185-06-08T

B DUMP BODY HINGE KIT 8T ( WITH SUBFRAME) 185U-06-08T

COMMON PARTS A & B

1 HINGE PIN 8T (1 1/4" DIA. X 3") 185-06-08-02X

2 HINGE UPPER PIVOT 8T (1" THICK X 5 7/8") 185-06-08-04

3 FIXED HINGE 8T (3/8" THICK X 3") 185-06-08-05

C DUMP BODY HINGE KIT 24T 185-20-24T

4 HINGE PIN 24T (1 7/8" DIA. X 5 1/8") 185-20-24-02X

5 HINGE UPPER PIVOT 24T (2" THICK X 7 7/8") 185-20-24-04

6 FIXED HINGE 24T (1" THICK X 4 1/4") 185-20-24-05

D DUMP BODY HINGE KIT 35-45T 185-35-45T

7 HINGE PIN 35-45T (2 1/4" DIA. X 7 1/8") 185-35-45-02X

8 HINGE UPPER PIVOT 35-45T (3" THICK X 7 5/8") 185-35-45-04

9 FIXED HINGE 35-45T WITH BOLT & NUT (1 1/2" THICK X 4") 185-35-45-05X

11 HARDWARE KIT 185-1 (35-55T) HW-185-1 p.135

COMMON PARTS

10 GREASE FITTING 1/4"-28 STRAIGHT GF-25-28-S

PART # 185U - DUMP BODY HINGE KIT


Part # 185U 10/17/2012 814

PORT VIEW SECTION D-DSCALE 1 / 10

D

D

TITLE:PART:

230A-U20/06/2012

OIL TANK KIT

5

2

4

5

24T - 35TEMPTY WEIGHT: 64 LBS

B

6

BYPASS RETURN(3 LINE SYSTEM)

PUMP SUPPLY & RETURN

DRAIN

BAFFLES

BAFFLES CONFIGURATION

71

3

8TEMPTY WEIGHT: 46 LBS.

A

8

OLD STYLE TANK COVER CAP

ITE

M


A OIL TANK KIT 8T 230A-8T25 LITRES: 6.6 US GALLONS: 5.5 CAN GALLONS

DIMENSIONS: 16 1/2"L X 12 3/4"W X 13"H

B OIL TANK KIT 24-35T 230A-24-35T46 LITRES: 12.3 US GALLONS: 10.3 CAN GALLONS

DIMENSIONS: 20 1/2"L X 14 3/4"W X 15 3/8"H

COMMON PARTS

1 ANTI-SPLASH COVER 230A-01X

2 ½" NPT DRAIN PLUG 230-03

3 ANTI-SPLASH CORK GASKET 230A-01-05

4 REDUCER (2" TO 1 1/4") 900-08-45-05

5 SIGHT & TEMPERATURE GAUGE 230-65

6 MAGNET M1X1-025

7 STEEL TANK CAP ASSEMBLY WITH FILTER (NEW) 230A-04

- HARDWARE KIT 230A HW-230A-1 p.135

DISCONTINUED PARTS

8 TANK COVER CAP WITH FILTER (OLD) 230-02

PART # 230A-U - OIL TANK KIT


Part # 230A-U 10/17/2012 816

TITLE:PART:

900U30/04/09

HYDRAULIC CONNECTION KIT

4

5

3

1B1A 2

6

A: 8T KIT WEIGHT: 9.5 LBS.

B: 24 - 35T KIT WEIGHT: 9.5 LBS.

36" LONGER

ITE

M


A HYDRAULIC CONNECTION KIT 8T 900-06-08T

1A 7/8" O-RING 3/4" SWIVEL 90 DEGREE ELBOW MALE 8T 900-06-08-03

B HYDRAULIC CONNECTION KIT 24-35T 900-20-35T

1B 1-1/16" O-RING 3/4" SWIVEL 90 DEGREE ELBOW MALE 24-35T 900-24-35-03

COMMON PARTS

2 PRESSURE HOSE 8-35T (3/4" DIA. X 64" LONG) 900-08-35-04

3 SUCTION HOSE 8-55T (1 1/4" DIA. X 120" LONG) 900-08-45-08

4 MALE ADAPTER 8-55T (1 1/4" DIA.) 1000-300M

5 COLLAR 8-55T (2" DIA.) 2000-C

6 ADAPTER 8-35T (1" TO 1 1/4") 900-08-35-05

PART # 900U - HYDRAULIC CONNECTION KIT


Part # 900U 08/10/2012 818

TITLE:PART:

500U - 501U502U14/06/2012

MAILHOT TELESCOPICCYLINDERS

SERIES CS & MDOUBLE ACTING

SERIES M

TO

N

DESCRIPTION # BEAU-ROC PRICE WEIGHTOIL

CAPACITY

8T "M" SERIES CYLINDER M80-3.5-3 134 lbs 2.0 USG

M90-3.5-3 154 lbs 2.4 USG

M100-3.5-3 152 lbs 2.5 USG

M110-3.5-3 173 lbs 2.8 USG

M120-3.5-3 170 lbs 2.9 USG



8T "M" SERIES CYLINDER M80-3.5-3DA 145 lbs 2.2 USG

35T "M" SERIES CYLINDER M90-3.5-3DA 145 lbs 2.2 USG

35T "CS" SERIES CYLINDER CS130-5.5-3DA 325 lbs 10 USG

PART # 500U-501U-502U - MAILHOT TELESCOPIC CYLINDERS

*** BASE PRICES SUBJECT TO MONTHLY SURCHARGE ***


502U - CS SERIES DOUBLE ACTING (ON ALL STAGES)

500U - M SERIES -POWER UP -GRAVITY DOWN BORE SEAL

501U - "M" SERIES DOUBLE ACTING (ON ALL STAGES)

Part # 500U-501U-502U 10/17/2012 820

TITLE:PART:

300A18/04/07

SINGLE ACTING (TWO STAGE)ELECTRIC HYDRAULIC POWER PACK

(TELESCOPIC HOIST)

3000 PSI MAX.WEIGHT: 38 LBS

A

ITE

M


A POWER PACK #DB-1694 300A-1X

5.10 GPM AT 0 psi / 11.7 VOLTS D.C. / 230 AMPS.



MOTOR: 12 VOLTS DC / 1 TERMINAL / STANDARD DUTY

TANK: 4 GALLON

ENDHEAD 3/8 NPTF PRESSURE-RETURN PORT

3/8 NPTF AUXILLIARY RETURN PORT

2 X 3/8-16 TAP X .38 DEEP MTG HOLES

AJUSTABLE RELIEF VALVE SET AT 3000 PSI

Note: drawing may not reflect all power pack features.

PART # 300A - SINGLE ACTING (TWO STAGES) ELECTRIC HYDRAULIC POWERPACK (TELESCOPIC HOIST)


Part # 300A 08/10/2012 822

K

TITLE:PART:

151U13/09/12

MANUAL TARP ROLLER KIT

4

5

2 3

1

6

MESH SOLDSEPARATELY

TOTAL WEIGHT:12 LBS

1

2

3

4

5

-

6 EXAMPLE: MY CODE:

ITEM DESCRIPTION PRICE CODE PRICE CODE PRICE137-14 Mesh 137-14WIDTH + - + - +

84 96" body width (standard) 84 REF. LENGTH + - -

12 Up to 12' length 16 From 12' to 16' length19 From 16' to 19' length

MESH +T Standard mesh (all sizes )

CODE:

PRICE: $


137-14-84-16T

PART # 151U - MANUAL TARP ROLLER KIT WITH MESHIT

EM

DESCRIPTION # BEAUROC PRICE

150-12X

MANUAL TARP ROLLER KIT (WITHOUT MESH) 151-096-AL

1.

2.

3.

4.

TARP ROLLER LOCK

MESH

16

T

ROLLER BUSHING UNIT 150-002

TARP ROLLER TUBE 150-01-096-AL

TARP ROLLER HANDLE 150-11X

ALUMINUM TARP ROLLER DISC 150-10-1X

HARDWARE KIT 151 HW-151-1 p.317

NOTE: For complete table, see p.310

Note: add front to side height difference if needed

REFERENCE LENGTH = CAB + BODY

Part # 151U 10/17/2012 824

A

C

TITLE:PART:

628U14/06/2012

ULTRA FRONT OPTIONS

STRAIGHT FRONT (X = 87 3/4" )TAPERED FRONT(X = 79 1/4" )

WEIGHT (12" MODEL): STRAIGHT: 66 LBSTAPERED: 61 LBS

A

FLAT FRONTWINDOW INSERTS

WEIGHT : 25 LBS

B

STANDARD FRONTWINDOW INSERTSWEIGHT : 9.3 LBS EA.

C

*** NEW ***

DWEIGHT: 102 LBS

X"

TYPE DESCRIPTION PRICE CODE PRICE CODE PRICE

STYLE - + - +S Straight frontT Tapered front

LENGHT - -12 12" cab shield18 18" cab shield24 24" cab shield

CODE

PRICE

A

B

C

D

PART # 628U - ULTRA FRONT OPTIONSEXAMPLE: MY CODE:

1. 628U Cab shield (item A) - ULTRA 628U

628U-S-18$

ACCESSORIES

2.+

S

3.

+

18

WINDOW INSERT (FLAT FRONT)

628U-02X

ITE

M

DESCRIPTION # BEAUROC PRICE

WINDOW INSERT KIT (TELESCOPIC STYLE FRONT)

628U-01X

CAB SHIELD - ULTRA See table above -

FRONT MOUNT WINDSCREEN 150U-9X-2X3


Part # 628U 10/17/2012 826

TITLE:PART:

911U14/06/2012

WIRING HARNESS KIT

WEIGHT: 6 LBS

A

ITE

M


A WIRING HARNESS KIT (9 ENDS) 911-01X

PART # 911U - WIRING HARNESS KIT


Part # 911U 08/10/2012 828

TITLE:PART:

810U14/06/2012

MANUAL OPENINGTAILGATE KIT

1

COMPLETE KITWEIGHT: 22 LBS

A

KIT WITHOUT RODWEIGHT: 15 LBS

B

2

ITE

M


A MANUAL TAILGATE MECHANISM 810-1X

B MANUAL TAILGATE MECHANISM (WITHOUT ROD) 810-1X-02

COMMON PARTS

1 STANDARD MOLDED BEAU-ROC HANDLE 810-01-01

2 1/2" YOKE KIT WITH THREADED ROD 810-07-01C

PART # 810U - MANUAL OPENING TAILGATE KIT


Part # 810U 10/17/2012 830

TITLE:PART:

708U18/06/2012

DOUBLE ACTING TAILGATELATCH BOLSTER KIT

WEIGHT:4 LBS

WEIGHT:4 LBS

WEIGHT:4 1/2 LBS

EXTERIOR VIEW

INTERIOR VIEW

AWEIGHT:116 LBS

ZINC CHROMATEDPARTS

*OPTIONAL*

*OPTIONAL*

WEIGHT:4 LBS

4

65

3

2

1

ITE

M


A DOUBLE ACTING BOLSTER KIT 708U-097X

1 ECCENTRIC LEVER & U HEXAGON KIT (EACH) 706-02X

2 DOUBLE ACTING LEFT LOCK KIT (DRIVER) 708A-3X-G

3 DOUBLE ACTING RIGHT LOCK KIT (HELPER) 708A-3X-D

4 AIR CYLINDER BRACKET (OPTIONAL) 706-13X

5 DOUBLE ACTING TAILGATE WARNING LABEL 1003-708-01

6 DOUBLE ACTING AIR CYLINDER LEVER (OPTIONAL) 708-10

PART # 708U - DOUBLE ACTING TAILGATE LATCH BOLSTER KIT


Part # 708U 08/10/2012 832

K

L

TITLE:PART:

800U-S18/06/2012

ULTRA REPLACEMENT SIDES &SIDE ACCESSORIES

A

ULTRA DUMP BODYSIDES

6

1A

4

1B

WEIGHT:1.9 LBS

WEIGHT: 3 LBS.WEIGHT:1.5 LBS

EKIT

WEIGHT: 12 LBS

SIDEACCESSORIES

B

COMMON SIDE & TAILGATE PARTS

5

WEIGHT: 4 LBS

WEIGHT: 4 LBS

WEIGHT: 0.5 LBS

**DISCONTINUED MODEL**

3

**SIDE POSTS OPTIONAL**

1 DROP SIDEPER SIDE

2 DROP SIDESPER SIDE

2

62" LONG

62" LONG

ITE

M


A ULTRA SIDES (*QUICK RELEASE MECHANISM OPTIONAL*)

12" SIDE 800U-S1215" SIDE 800U-S1518" SIDE 800U-S18

Note : standard side with posts, inform us if you want them removed.

B TJ SIDES (*QUICK RELEASE MECHANISM OPTIONAL*)

12" SIDE 800-TJ-1215" SIDE 800-TJ-1518" SIDE 800-TJ-18

*OPTIONAL QUICK RELEASE MECHANISM & HINGES INSTALLED 800U-S15-DINote: add "-DI" at the end of the side code.

SIDE ACCESSORIES

1A DROP SIDE HINGE (3" X 4" TUBING) (EACH) 800U-01-1X

1B DROP SIDE HINGE (1" X 2" TUBING) (EACH) 800U-01-2X

COMMON PARTS

E QUICK RELEASE MECHANISM KIT 800U-3X2 QUICK RELEASE HANDLE - MOLDED 800U-07

3 QUICK RELEASE LOCKING PIN ASSEMBLY 800U-4X

4 QUICK RELEASE HANDLE ASSEMBLY - MOLDED 800U-5X

5 FLANGED MOUNTED BEARING 800U-06

6 DUMP BODY LOGO (1 3/4" X 6 3/8") 910-01-08

HARDWARE KIT 800U HW-800U-1HEX BOLT 7/16-14 UNC X 2 GRADE 5 (QTY=2)

HEX BOLT 7/16-14 UNC X 1 1/4 GRADE 5 (QTY=2)


HEX NUT 7/16-14 UNC (QTY=4)


UNHARDENED FLAT WASHER 7/16 USS (QTY=8)

PART # 800U-S - ULTRA REPLACEMENT SIDES & ACCESSORIES


Part # 800U-S 10/17/2012 834

L

M

TITLE:PART:

800U-T18/06/2012

ULTRA DUMP BODY DOUBLE ACTINGTAILGATE & TAILGATE ACCESSORIES

C

ULTRA DUMP BODYTAILGATE

TAILGATEACCESSORIES

48"WEIGHT:

6 LBS

1

2

34

6WEIGHT:1.9 LBS

WEIGHT: 3 LBS.WEIGHT:1.5 LBS

EKIT

WEIGHT: 12 LBS

LEFT RIGHT

D

COMMON SIDE & TAILGATE PARTS

9 WEIGHT: 0.5 LBS

WEIGHT:1 LB

WEIGHT: 1.4 LBS EACH

WEIGHT:1.2 LBS

**DISCONTINUED MODEL**

**TAILGATE POSTS OPTIONAL**

7

8

5

62" LONG

62" LONG

ITE

M


C ULTRA TAILGATE (WITH QUICK RELEASE MECHANISM INSTALLED)

20" TAILGATE 800U-T2024" TAILGATE 800U-T2428" TAILGATE 800U-T28Note : standard tailgate with posts, inform us if you want them removed.

D TJL TAILGATE (WITH QUICK RELEASE MECHANISM INSTALLED)

20" TAILGATE 800-TJ-T2024" TAILGATE 800-TJ-T2428" TAILGATE 800-TJ-T28

TAILGATE ACCESSORIES

1 3/8" CHAIN BANJO (EACH) 800U-01-A

2 UPPER TAILGATE PIN PIVOT KIT (QTY=2) 800U-01-B

3 TAILGATE PIN KIT (3" X 1 1/4" DIA.) (QTY=2) 800U-2X

4 CHAIN (3/8" X 48" LONG, GRADE 70) (EACH) 800-02-03

COMMON PARTS

E QUICK RELEASE MECHANISM KIT 800U-3X5 QUICK RELEASE HANDLE - MOLDED 800U-07

6 QUICK RELEASE LOCKING PIN ASSEMBLY 800U-4X

7 QUICK RELEASE HANDLE ASSEMBLY - MOLDED 800U-5X

8 FLANGED MOUNTED BEARING 800U-06

9 DUMP BODY LOGO (1 3/4" X 6 3/8") 910-01-08

HARDWARE KIT 800U HW-800U-1HEX BOLT 7/16-14 UNC X 2 GRADE 5 (QTY=2)





UNHARDENED FLAT WASHER 7/16 USS (QTY=8)

PART # 800U-T - ULTRA DOUBLE ACTING TAILGATE & ACCESSORIES


Part # 800U-T 10/17/2012 836

TITLE:PART:

750U21/06/2012

HOOK LIFT ROLLERS

SMALL ROLLERSWEIGHT: 30 LBS ea.

1

ITE

M


SMALL HOOK LIFT ROLLER KIT (4 1/2" DIA. X 10") (INSTALLED) 750-01XI

SMALL HOOK LIFT ROLLER KIT (4 1/2" DIA. X 10") (NON-INSTALLED) 750-01X

COMMON PARTS


PART # 750U - HOOK LIFT ROLLERS


Part # 750U 08/10/2012 838

TITLE:PART:

269U30/06/2010

ULTRA BODY PROP KIT

KITWEIGHT: 27 LB.

BODY PROP IN STOWED POSITION

BODY PROPDEPLOYED

1

ITE

M


A BODY PROP KIT (SUBFRAME VERSION) 269U-01X

BODY PROP KIT (SUBFRAME VERSION) (INSTALLED) 269U-01XI

1 BODY PROP FASTENER C/W MOUNTING HARDWARE HW-099-451

PART # 269U - ULTRA BODY PROP KIT


Part # 269U 08/10/2012 840

section 8 - ultra & ultra-c parts catalogue

Documents