scs bio data1
TRANSCRIPT
BIO DATA
Dr. S. C. Sharma VICE CHANCELLOR
TUMKUR UNINVERSITY TUMKUR
INDEX Sl. No.
Particulars
1. General Information 2. Academic Qualif ications 3. Posts Held 4. University Positions Held 5. Positions Held With Universities Abroad 6. Special Assignments 7. Prestigious Assignments 8. Sponsored Research Projects Carried Out 9. Sponsored Research Projects Initiated And Executed As
Principal, RVCE 10. Sponsored Projects Carried Out / Initiated And Executed
Through Industry Institute Interaction Cell 11. Sponsored Projects Carried Out / Initiated And Executed
Through Centre For Cognitive Technologies 12. Sponsored Projects (Under Special Schemes) Carried Out /
Initiated And Executed 13. Sponsored Projects Undertaken Under Centre For Social Service
And Skills Promotion (Skip) 14. Sustainable Technology Projects Undertaken 15. TIFAC Research & Development Project 16. Ph.D. Theses Guided 17. Papers Published In Refereed International Journals 18. Research Papers Presented / Published In National /
International Conferences 19. Overseas Research and Academic Assignments 20. Membership In Academic / Professional / Research
Organizations / Bodies 21. National Research Fellowships 22. Honors / Awards Received 23. Books Authored 24. Workshops/Seminars/Conferences Organized/
Conducted 25. Centres Established 26. Brief Profiles Of The Centres Established 27. Contributions to Technical Education As Principal 28. Contributions to The Field Of Social Service 29. Beneficiaries of Skill Development Programmes
30. Extension Services
31. Tumkur University Activit ies
32. Extra Curricular Activit ies
1. GENERAL INFORMATION
a) Name Dr. S.C.Sharma b) National i ty Indian c) Address (Off)
Vice Chancellor Tumkur University Tumkur
d) Address (Residence) No.171, 6 t h Cross, Gandhi Nagar, Bangalore-560 009, INDIA. Phone: 0091-80-22261993 Fax: 0091-80-22250292
2. ACADEMIC QUALIFICATIONS
Sl.No. Degree Specialization Class College/University 1 BE Mechanical Engineering I Class with
Distinction BMSCollege of Engg. Bangalore University
2 ME Metal Casting Science & Engineering
I Class with Distinction
M.S.R.I.T, Bangalore University
3 Ph.D. Mechanical Engineering -- Mysore University 4 Dr.Eng.
(Doctor of Engg.)
Mechanical Engineering __
Mysore University
5 D.Sc. (Doctor of Science)
Materials Science
Mangalore University
6 D.Sc. (Doctor of Science)
Computer Science and Engineering
---- Kuvempu University
7 D.Sc. (Doctor of Science)
Materials Science ----- Deakin University, Australia
8 Dr. Eng., (Doctor of Engg.)
Engineering Faculty Avinashlingam University for Women, Coimbatore, Tamilnadu.
9 Doctors of Letters
Faculty of Music Avinashlingam University for Women, Coimbatore, Tamilnadu.
10 LLB Bangalore University 11 Doctor of LAWS (LL. D)
The National Law School of India University, Bangalore
3. POSTS HELD Sl. No.
Period Designation Department / College / University
1 Oct 2010 to date
Vice Chairman Karnataka State Council for Higher Education, Govt. of Karnataka, Bangalore
May 2009 to date
Vice Chancellor Tumkur University, Tumkur
2 Jan 2004 to 2009
Principal R.V.College of Engineering, Bangalore
3 2000 to 2004 Vice-Principal R V College of Engineering, Bangalore
4 1999 to 2004 Professor and Head Department of Industrial Engineering and Management, RVCE, Bangalore.
5 1999 to 2000 Director-Planning and Development
R V College of Engineering, Bangalore
6 1996 to 2004 Professor and Head Department of Mechanical Engineering, R.V.College of Engineering, Bangalore.
7 1993 to 2004 Professor & Director Post Graduate Studies, Center for Manufacturing Research & Technology Utilization, Bangalore
8 1988 to 2004 Director Research & Development, Dept. of Mechanical Engg., RVCE, Bangalore
9 1995-96 Professor Department of Mechanical Engineering, R.V.College of Engineering, Bangalore.
10 1991-95 Assistant Professor Department of Mechanical Engineering, R.V.College of Engineering, Bangalore.
11 1988-91 Lecturer Department of Mechanical Engineering, R.V.College of Engineering, Bangalore.
12 1985-86 Lecturer
M. S. Ramaiah Institute of Technology, Bangalore
4. UNIVERSITY POSITIONS HELD
Sl. No.
Duration Position University
01 26-09-2007 (3 years)
UGC Nominee as Member of the Executive Council
Visveswaraya Technological University (VTU), Belgaum.
02 12-11-04 to 17-09-2007
State Government of Karnataka Nominee as Member of the Executive Council
Visveswaraya Technological University (VTU), Belgaum.
03 19-12-2005
Member
Research Review Committee, VTU Belgaum
04 26-06-2008 to date
Chairman Sub Committee of the Research Grant Committee, VTU, Belgaum
05 13-12-2004 Associate Editor Research Journal Editorial Board VTU Belgaum
06 2004 to 2008 Member of BOE Material Science and Computer Science, Mangalore University, Mangalore
07 2007 to date Syndicate Member Avinashilingam University, for Women, Coimbatore, Tamilnadu
08 2007 to date Member of Faculty of Engineering
Department of Mechanical Engineering, Bangalore University, Bangalore.
09 2008 to date Chairman Committee to identity parameters for Database, VTU, Belgaum
10 2008 to date Member Constitution of Research Committee of VTU
11 2008 to date Member Syndicate of Mangalore University, Mangalore.
12 2008 to date Member UGC Nominated Senate Member, Jain Viswa Bharati University, Ladnun, Rajasthan.
13 2008 to date Member Advisory Committee, Indian Institute of Dalit Studies, New Delhi.
14 2008-2010 Member, Governing Council (VC Nominee, VTU)
Sir M.Visvesvaraya Inst. of Technology, Bangalore.
15 2008 till date Member, Research Advisory Committee
Karnataka State Women’s University, Bijapur
16 2008 till date Expert, Advisory Committee
Karpagam University (Deemed University), Coimbatore – UGC Nominee
17 2009 till date UGC Nominee on the Governing Body
Kongu Engineering College, Erodu. 2207-08 ti 2012-13
18 2009 till date Expert, Advisory Committee
Christ University (Deemed University), Bangalore – UGC Nominee
19 2009 till date Honorary Advisor Christ University, (Deemed University), Bangalore
5. POSITIONS HELD WITH UNIVERSITIES ABROAD Sl. No.
Duration Position University
01 2004 Adjunct professor of Engineering
Institute of Technology, West Virginia University, Montgomery, WV – 25136, USA
02 2005 Senior Scientist
College of Engineering and Applied Science, University of Wisconsin-Milwaukee, USA
6. SPECIAL ASSIGNMENTS Sl. No.
Year Position University
1 2008 Member Expert Committee constituted by UGC to evaluate the performance and academic attainments for the conferment of fresh autonomous status for three colleges
2 2008 Member Committee constituted by UGC for the conferment of Deemed to be University Status for Galgotia University, UP.
7. PRESTIGIOUS ASSIGNMENTS
Sl. No.
Duration Position University
01 2006 to date Member The Karnataka State Legal Service Authority, Govt. of Karnataka
02 2006 to date Member
UGC Committee to prepare policy guidelines for implementation of reservation for physically disabled persons in admission, recruitment and other amenities
03 2004 to date Honorary Adviser Sir Dorabji TATA Trust, Mumbai 04 2007 to date Honorary Professor of
Eminence Mangalore University
05 Sept. 2007 to 2008
Visiting Scientist Department of Aerospace, IISC, Bangalore.
06 Sept. 2008 to date
Member State Planning Board, Karnataka Government
8. SPONSORED RESEARCH PROJECTS CARRIED OUT
Sl. No.
Project Title
Funded by Grant (Lakh)
1 Evaluation of Mechanical properties and corrosion studies of aluminum-lithium alloys
DST 7.00
2 Preparation & properties of aluminum-hematite particulate composites and evaluation of mechanical, machinability and corrosion studies
ISRO 1.30
3 Preparation and property evaluation of RR350-SiC and corundum composites and fabrication of an intermediate casing of Gas Turbine
GTRE 0.25
4 Preparation and Property evaluation of lead-quartz particulate composites
CSIR 1.50
5 Machinability studies on aluminum-lithium-zircon composites
ISRO 1.30
6 Preparation and property evaluation of aluminum-copper-graphite composites and corrosion and machinability studies
LRDE 2.00
7 Preparation & property evaluation of lead-zircon particulate composites
UGC 5.25
8 Development of Al. based MMCs for Aero Engine Applications
UGC 6.65
9 Modernization of material testing laboratory AICTE 5.00 10 Machinability studies on aluminium-lithium alloys ADA 2.10 11 Effect of subzero end chill on the properties and
soundness of cast iron DST 5.3
12 Characterization and mechanical property evaluation of zinc-aluminum-graphite particulate composites
CSIR 2.50
13 Studies on machinability and joining aspects by brazing and welding of aluminum-copper-graphite composites
LRDE 2.00
14 Modernization of composites materials laboratory AICTE 5.15 15 Study of properties of aluminum-lithium-corundum
particulate composites ISRO 1.50
16 Structure and property evaluation of zinc aluminum-short glass fiber reinforced composites
UGC 3.60
17 A study of tribological and damping properties of ZA-27 based composites for automobile applications
CSIR 7.50
18 Preparation and characterization of magnesium-silicon carbide short fibers metal matrix composites
ISRO 3.00
19
Development of 7075 aluminum based MMCs LRDE 3.15
20
R.V. Product Development and Consultancy Cell AICTE 8.00
21 Study of fretting Fatigue behaviour of a titanium alloy for aerospace applications
GTRE 4.95
22 Microwave assisted Manufacturing process for polymer composites
DRDO 39.50
25 Use of composites for high speed rotor construction for pulse power applications
ARB, DRDO 18.55
26 Nano Powder Filled Conductive Polymer Composites for Space Applications
ISRO 29,92
27 Experimental and modeling attempts to Predicting fretting-fatigue life on turbine components
DRDO-IPR 14.858
28 Laser Assisted deposition of coatings for anti-wear characteristics of Turbine blades
DRDO-IPR 14.253
29 Environmental Acceptability of precast stabilized blocks using treated municipal marginal solid waste
Environment & Forest
9.98
30 Characterization of tribo-corrosive properties of WC-NI Based hard coating produced by electro-deposition
NRB 40.28
9. SPONSORED RESEARCH PROJECTS INITIATED AND EXECUTED AS PRINCIPAL, RVCE
Sl. No
Project Title
Funded by
Grant (Lakh)
1 Electrochemical Studies on Al-Lithium Alloys ISRO 1.60 2
Machinability Studies on Zinc-Al-Talc Particulate Composites UGC 6.25
3
Some Investigations on Weldability of Al-Lithium Alloys UGC 7.50
4 Study of Heat Transfer Phenomenon in MMCs UGC 10.00 5 Some Investigation on Treatment of Pathogens in Sludge to
make it useful DST 6.00
6 Studies of Properties of Lead-Corundum Composites ISRO 1.37 7 Modernization of Metallography Laboratory AICTE 3.30 8 Modernization of Production Technology laboratory AICTE 3.10 9 Fabrication & Characterization of Lead-SiC Composites AICTE 4.00 10
Development of S/W for the Design & Drafting of Mirror Drill Jigs
DST
5.00
11 Preparation & Property Evaluation of Al-Mica MMCs UGC 6.60 12
Development of Austempered Ductile Iron for Automotive Applications
CSIR
5.00
13
Fatigue, Creep & Corrosion Studies on Al-Copper-Graphite Particulate Composites
UGC
3.70
14
Characterization & Mechanical Property Evaluation of Bronze-Talc Particulate MMCs
UGC
3.70
15
Design & Development of a Nesting S/w Tool for Optimal Allocation of 2-D Modules
UGC
4.40
16
A Study on the Utilization of Sewage for Methane Gas Generation & Vermicomposting
UGC
4.40
17
Processing & Properties of Al-Garnet Metal Matrix Particulate Composites
UGC
5.00
18
Variation of Corrosion Behaviour of Cryogenic Temperature Chilled Cast Iron
UGC
6.50
19
Development & Characterization of Lead-Kyanite Particulate Composites
UGC
6.85
20 Preparation & Property Evaluation of Al-Albite MMCs UGC 6.85 21
Preparation and Property Evaluation of Fly Ash Reinforced ZA-27 Alloy MMCs
UGC
2.15
22
Design and Development of Appetite Reinforced ZA-27 Alloy MMCs (Career award project of Prof. M.P Mylari Guptha)
UGC
1.00
23
Finite Element Analysis of Mechanical Properties in Al. MMCs (Emeritus Fellowship of Prof. KN Krishna Murthy)
UGC
2.80
24
Effect of Titanium Oxide on the Mechanical Behaviour of ZA-27 Alloy (Career award project of Dr. M S Murali)
UGC
3.50
25
Computer Aided Design and Drafting of Machine Tool Gear Box (Career award project of Dr. A V Suresh)
UGC
4.00
26
Effect of Garnet Particulate Reinforcement of Mechanical Properties on ZA-27 (Career award project of Dr R S Kulkarni)
UGC
5.00
27
Effect of Heat Treatment on the Mechanical properties of ZA-27 Alloy/Quartz (Career award project of Dr B Anand)
UGC
6.00
28 Development of Welding Procedures of Aluminium MMCs
(Career award project of Prof. K Saravanan)
UGC
7.50
29
Modified ZA Alloy for Journal Bearing Applications (Career award project of Prof. R Venkatesan)
UGC
7.50
30
Preparation and Advanced Al-Glass Particulate Composite & Evaluation (Career award project of Dr C S Chandrasekara Murthy)
UGC
8.00
31
A Study of Glass & SiC Short Fibre Reinforced Al 6061 Hybrid Composites
ISRO
3.30
32
Preparation & Characterization of E-Glass Fibre Reinforced Polyurethane composites
ISRO
7.00
33 Development of aluminum foam for structural applications ISRO 5.62 34 Development of particulate reinforced Aluminum MMCs with
superior thermal properties for space applications ISRO 10.83
35 Cold expansion process evaluation for life limited critical aero engine components
AICTE 25.00
36 Development of Novel method for composites preparation- A shear mixture
UGC 0.95
37 The sliding wear behavior of polyurethane composites UGC 0.85 38 Optimization of drilling parameter of GFRPs UGC 1.00 39 Study of condintion monitoring of rotating components in
Industrial machinery through vibration analysis UGC 0.95
40 Development of eco-friendly natural fiber reinforced plastic for footwear applications
UGC 0.95
41 Optimizing FRP curing technology by using microwave, IR, UV and thermal curing
UGC 0.97
42 Investigation on Degradation of glass fiber reinforced epoxy composites by ultraviolet radiation and condensation
UGC 0.96
43 Property of high reinforcement content aluminum matrix composites for electronic packaging
UGC 0.98
44 Preparation & Property Evaluation of Beryllium Based MMCs for Lightweight and high strength Structural applications
ISRO 9.22
45 Design and Development of Polymer composite Structures for unmanned under water vehicles
NRB, DRDO 16.90
46 ASIC control for AC servo motor drive for military applications ARB, DRDO 9.98 47 Development of Computational model and simulation for
optimization of penetration of segmented projectiles using hydrocodes.
ARB, DRDO 8.90
48 Laser Assisted deposition of thermal barrier coating on Missile casting
ARB DRDO
9.97
49 Tungsten Nano Powder for KE Penetrators ARB DRDO
9.89
50 Laser Assisted Disposition of thermal barrier coatings for space shuttle applications
ISRO 9.92
51 Laser Assisted Deposition of Coatings for Anti-Wear Characteristics of Turbine Blades
IPR, DRDO 14.25
52 Study of Polyimide Composites for Aerospace Applications
IPR-DRDO 14.03
53 Design & Development of Controller Working on 1553B Digital Bus in Various Modes for Military Applications
IPR-DRDO 13.74
54 Local Short-Term Prediction of Wind Speed – A Neural Network Analysis
IPR-DRDO 13.74
55 Development of Functionally Graded Materials for Light Weight Applications
IPR-DRDO 14.03
56 Laser Assisted Disposition (LAD) of Thermal Barrier Coatings for Space Shuttle Applications
ISRO 9.92
57 Effect of processing on properties of polymer composites by microwave curing
ISRO 9.92
58 Design & Development of Dielectric Lens Based Active Smart Array Antenna for Surface Communication of Underwater Vehicles
NRB 39.85
59 Design and Development of Compact Universal Controller for Rudder Actuation System of Autonomous Vehicle using DSP & FPGA
NRB 35.00
60 Modeling bullwhip effect for an n-stage efficient supply chain network
SSER, IPR, DRDO
4.88
61 Insilco Analysis of Rheumatic Arthritis Disease SSER, IPR, DRDO
4.85
62 Semiconductor Mediated Photocatalytic Degradation of Toxic Complex Organic Substances
SSER, IPR, DRDO
4.97
63 Use of Crumb Rubber in Cement Stabilised Soil Blocks
SSER, IPR, DRDO
4.87
64 Competency Mapping for a leading technical Institution to assist the strategic sourcing of talent and for quality improvement
SSER, IPR, DRDO
4.91
65 Analysis of polymer film coatings and causes for drag reduction for under water bodies
NRB, DRDO 14.6
66 Innovative approaches for improving the hot / wet performance NRB, DRDO 12.0
of bismaleimide /carbon fiber composites 67 Accelerated testing for long-term durability of PU foam cored
GFRP sandwich panels For naval structural applications NRB DRDO 14.56
68 Frettings and HCF behavious of Blade-Disc Dovetail Root-joints of Fan Module of Gas Turbine Engines
ARDB, DRDO
14.56
69 Preparation and characterization of Fire retardant grade nano clay dispersed FRP composites for marine structures
NRB DRDO 27.40
70 Fabrication and characterization of fiber metal laminates for gun barrel application using filament winding method
ARB DRDO
9.90
71 Adaptive texture representations methods for automatic target detection using Neural network
ARB 9.96
72 Characterization of tribo-corrosive properties of WC-NI Based hard coating produced by electro-Deposition
NRB 40.28
73 Development and Characterization of Nano metallic magnets for naval applications
NRB 49.81
74 Building 3-D Models of underwater objects NRB 14.97 75 Design and Development & Intigration of co-processor with
DSP TI6X family using FPGA for Naval applications NRB 21.35
76 Studies on design and Characterization of Radio Frequency microelectro mechanical System based devices for Naval Applications
NRB 44.73
77 Sea water durability, Drilability, laser drilling and buckling studies of the PMCs for UUV structural applications
NRB 45.96
78 Processing and Mechanical, electrical and thermal properties characterization of thermosets / nano fillers, composites using Twin screw extrusion
IPR 4.76
79 Qualitative and Quantities analysis of bone abnormality in human being using image processing technique
DST 2.34
80 Varietal improvement of ginger (gingiber officinale l.) By mutation breeding and molecular analysis of the mutants:
DBT 9.60
81 Development of nano titanium oxide based transition metal compounds thin film for thermal sensors applications
NRB 5.00
82 Design & characterization of radio frequency microelectromechanical system (mems) based devices and circuits for military applications
ARB 21.16
83 A novel automatic target recognition technique using ada-boost algorithm
ARB 16.00
84 Development of algorithms for improved accuracy in dgps measurements using digital signal processing tools
ARB 13.90
85 Redesign and fabrication of gasification plant lignite fuel utilization
Ministry of Coal
40.06
86 Characterization of multilayer hardfacing on ferrous alloys DST 12.38 87 Fabrication and Characterization of Composites Tubes for
Gun Barrel Application using Filament Winding Techniques ARB 9.90
88 Adaptive Texture Representation Methods for Automatic Target Detection using Neural Network
ARB 9.964
89 Biological production of clean fuels from coal Ministry of Coal
45.36
90 Design, Development & intigarion of co-processor with DSP T16X family using FPGA naval applications
NRB 21.35
91 Development and characterization of nanometallic magnets for naval applications
NRB 49.81
92 Preparation and characterization of fire retardant grade nanoclay dispersed FRP composites for marine structures
NRB 27.40
93 Studies on Design and characterization of radiofrequency micro-electro mechanical system based devices for Naval applications
NRB 44.73
94 Building 3 d models of underwater objects NRB 14.97 95 Implementation of Geo-acoustic approach for obtaining Sea
bed properties in shallow water region NRB 19.83
96 Seawater durability, drillability laser drilling and buckling studies of the PMCs for UUV structural applications
NRB 45.96
97 Biological control of red rot disease of sugarcane DBT 10.00 98 Processing and Mechanical, electrical and thermal properties
characterization of thermo sets / nano fillers, composites using Twin screw extrusion
IPR 4.765
99 Setting up of RS& GIS Lab ISRO 26.00 100 Study & Development of Image Compression Algorithms for
Satellite Images ISRO 7.13
10. SPONSORED PROJECTS CARRIED OUT / INITIATED AND EXECUTED
THROUGH INDUSTRY INSTITTUTE INTRACTION CELL Sl. No
Title Funded by
Grant lakh
1 Development of SiC Particulate Reinforced MMCs for Aeronautical Applications
HAL 3.30
2 Development & Characterization of Al.Quartz Composites for Elect iconic panels
CABS 4.50
3 Study of Cold Hole Expansion Process & Evaluation of Fatigue Properties
GTRE 4.80
4 Dn. Fabric.& characterization of thin walled Al. alloy casting using gravity die-casting for man portable radar
LRDE 9.80
5 TEDP in Polymer based Composites DST 2.00 6 Experimental studies on RADOM Structural Materials CABS 4.90 7 Design and Fabrication of polymer Composite Antenna Cabin
Structure LRDE 9.90
8 Study on Fretting Fatigue Behaviour of a Titanium Alloy for Aerospace applications
GTRE 4.95
9 Thermomechanical Analysis of Solar Panel ISRO 2.50 10 Development of Mg. SiC MMICs for Electronic Panels LRDE 9.90 11 Studies on the Effect of Weather, Marine, Environment and UV
Carbon Fiber-Amide Composite LRDE 9.90
12 Development of Aluminium Metallic Foam for HEAT Exchanger Fins for Electronic Panel Application
ARMB 9.93
11. SPONSORED PROJECTS CARRIED OUT / INITIATED AND EXECUTED
THROUGH CENTRE FOR COGNITIVE TECHNOLOGIES Sl. No
Title Funded by
Grant lakh
1 Development of Data Conversion Card for 1553 Specifications
CABS 5.90
2 Analysis and Design of GPS Based Target Tracking Systems and MIL 1553 Radar Target data
CABS 4.30
12. SPONSORED PROJECTS (UNDER SPECIAL SCHEMES) CARRIED OUT / INITIATED AND EXECUTED
Sl. No
Title Funded by
Grant lakh
01 R.V. Product Development and Consultancy Cell Scheme: Industry-Institute Partnership Cell
AICTE 8.00
02 Establishment of EDP Cell for Entrepreneurship and training program
AICTE 7.00
03 Cold Expansion Process Evaluation for Life Limited Critical Aero-engine Components Scheme: Nationally Coordinated Projects
AICTE 25.00
04 Preparation of thermal, electrical and Mechanical property
characterization of epoxy/ MWCNT/ carbon nano powder composites
AICTE
7.00 05 Charcterisation of Aluminum based Metal Matrix composites
with higher percentage of SiC reinforcement for electronic packaging applications
AICTE
6.00 06 Established of UGC Network Resource Centre (UGC-NRC) UGC 1.45 07 Establishment of EDC DST 8.68 08 Frettings and HCF behavious of Blade-Disc Dovetail Root-
joints of Fan Module of Gas Turbine Engine AICTE
7.85 09 Preparation of thermal, electrical and mechanical property
characterization of epoxy/Mwcnt/carbon nanopowder composites
AICTE
7.00 10 Characterization of Aluminium based MMCs with higher
percentage of SiC reinforcement for electronic packaging applications
AICTE
6.00 11 Automatic Target recognition of synthetic aperture radar
images using support vector machine AICTE
7.00 12 Modernization of Industrial and quality Engg Lab AICTE 10.00
13. SPONSORED PROJECTS UNDERTAKEN UNDER CENTRE FOR SOCIAL
SERVICE AND SKILLS PROMOTION (SKIP) Sl. No.
Title of the project Funded by Grant lakh
1 Enlistment training program for rural based SC/ST DST 1.35
2 Training programme for SC / ST Shramik Vidyapitha
1.33
3 Training lucrative trades for SC SWD 10.06
4 Structural fabrication and foundry trade (ST) SWD 6.12
5 Training in Miller, Shaper, home appliances, building construction, plumbing
SWD 11.00
6 Training program for rural based SCs in DTP, SP and Book binding
DST 3.72
7 A crash program for rehabilitation of SC youths DST 2.42
8 Structural fabrication and foundry trade (SC) SWD 2.04
9 Flexible machining and welding SWD 7.13
10 Training in gear cutting, milling etc SWD 12,23
11 Self employment training program in wood turning SWD 0.81
12 Skill development Training through Science and Technology (Machining & Welding)
DST 1.05
13 Self employment training program- Testing and analyzing of exhaust emission from vehicles
DST 3.53
14 Self employment training program- Computer hardware maintenances and assembly
DST 3.05
15 Self employment training program- Computer hardware maintenances and assembly (Extension)
DST 1.43
16 Fiber reinforced Polymer training DST 0.30
SWD-Social Welfare Department, Government of Karnataka
14. SUSTAINABLE TECHNOLOGY PROJECTS UNDERTAKEN UNDER CENTRE
FOR SUSTAINABLE TECHNOLOGY Sl. No.
Title of the Project Funded by Grant lakh
01 Some investigation on treatment of pathogens in sludge to make it useful
DST 0.60
02 Some studies on the use of sewage of Vermicomposting DBT 4.69
03 A study on the utilization of sewage for methane gas generation and Vermicomposting
UGC 4.40
04 Environmental Acceptability of Pre-cast stabilized block using treated municipal marginal solid wastes
9.98
05 Hybrid process for the conversion of Lignocelluloses Materials
5.98
06 Development of bio-fiber reinforced sandwich structure
Environmental Research Schemes
9.90
15. TIFAC PROJECT INITIATED AT RESEARCH AND DEVELOPMENT Hydrogen Economy Technology Programme (HETP) under the Joint Collaboration of RSST and DST (Rs. 5.5 Crore) on the development of commercialization of Hydrogen as an alternate energy source. GRANTS FOR DEVELOPMENT OF MUSEUM (KRIYAKALPA) Developed Technology Cultural Museum with developmental Grants of Rs. 1.35 lakh from Department of Kannada and Culture, Govt. of Karnataka 16. Ph.D. THESES GUIDED
SL. NO.
THESIS TITLE
Ph.D SCHOLAR
YEAR
1 Investigation into the preparation and properties of aluminium based metal matrix composites
Dr. R. S. Kulkarni 1994
2 Effect of subzero end chill on the properties and soundness of cast iron.
Dr. Joel Hemanth 1995
3 Studies on the development of zinc-aluminum based metal matrix composites
Dr.P.Raghothama Rao 1995
4 Some investigations on aluminium-lithium alloys Dr. Rathnakar Kamath
1996
5 Studies on the properties of lead-zircon particulate composites
Dr. J. Venkatesh 1996
6 Preparation and property evaluation of zinc-glass particulate metal matrix composites
Dr. B.M.Girish 1996
7 Development of zinc-glass metal matrix composites Dr. B. M. Satish
1997
8 Development of aluminum-copper-graphite particulate composites and its property evaluation
Dr. M. Nagarajan 1997
9 Development of zinc aluminum zircon particulate composites as bearing material
Dr.D.R.Somashekar 1999
10 A comparative Study of Corrosion Properties of Aluminium based Metal Matrix Composites
Dr.VTVijayalakshmi 2002
11 Effect of Heat treatment on the physical properties of ZA-27alloy/aluminite Metal matrix composites
Dr. Shanta Sastry 2002
12 Design and development of ZA-27/Flyash particulate composites
Dr. M S Koti 2002
13 A study on short glass fiber and silicon carbide particles reinforced Al6061 hybrid composites
Dr H K Shivanand 2002
14 Development of Magnesium feldspar composites material for aircraft structural application
Dr.B Anand 2003
15 Studies on the properties of Lead-quartz particulate composites
Dr. S.R.Arun 2003
16 Preparation and property evaluation of Aluminium-garnet particulate metal matrix composites
Dr.K H Thipperudrappa
2003
17 Characterization of ZA-27 alloy Metal matrix Composites
Dr. G Ranganath 2003
18 Novel polymer alloys and composites (PAPCs) based on polyurethane for high-tech industrial applications
Dr. H N Narasimha Murthy
2003
19 Influence of ceramic particulate on thermal mechanical properties Aluminium alloys
Dr M Krishna 2004
20 Preparation and properties of Al/glass short fiber composites
Dr Paul Vizhian S 2005
21 Computer modeling for Metal Matrix Composites Dr. Shivarudraiah 2005 22 E-glass reinforced polypropylene composites for
automotive applications Dr. Sanjeeva Murthy 2005
23 Data mining for Huge data Dr. Sobha Thilk 2006 24 Natural fiber reinforced polyurethane sandwich panel Dr. Rajashekar Algood 2006 25 Computer Recognition of offline handwritten Kannada
sentences Dr. Ramakanth Kumar P 2006
26 Life predication of Cold hole expansion studies (Co-guide)
Dr. N Shanmukha 2007
27 Computer Maturity System for Polymer Composites Selection
Dr. Doreswamy 2007
28 Performance of Parallel Simulator Dr. Prasad Babu 2007 29 Design of Digital Kanaban System Dr. Manjaiah 2007 30 Recognition of Handwritten Tamil Sentences using
Hybrid Hidden Markov Model. Dr. Subashini 2009
17. PAPERS PUBLISHED IN REFEREED INTERNATIONAL JOURNALS
Sl. No
Authors Title of the Paper Name of Journal, volume, year and page
1 S.C.Sharma Effect of albite particles on the coefficient of thermal expansion behaviour of the Al6061 alloy composites
Metallurgical and Materials Transaction, Vol.31A, (2000), pp.773-780.
2 S.C.Sharma Effect of aging on Oxidation Behaviour Aluminium-Albite Composites at high temperature
Journal of Materials Engineering and Performance, vol.9(3) (2000) pp.344-349
3 S.C.Sharma The effect of ageing duration on Mechanical properties of Aluminium 6061-Garnet composites
Proc. Instn. Mech. Engrs., vol.215 Part L, pp.113-119
4 S.C.Sharma A study on stress corrosion behavior of Al6061/albite composite in higher temperature acidic medium using autoclave.
Corrosion Science, vol. 43/10, (2001), pp. 1877-1889.
5 S.C.Sharma, A.Ramesh
Effect of heat treatment on Mechanical properties of particulate reinforced Al6061 composites
Journal of Materials Engineering and Performance, vol.9(3) (2000) pp.344-349
6 S.C.Sharma B.Anand M.Krishna
Evaluation of Sliding wear behaviour of feldspar particles reinforced magnesium alloy composites
Wear, vol.241 (2000) pp.33-40
7 S.C.Sharma K.H.W.Seah M.Krishna A.Ramesh
Oxidation behaviour of 6061 Aluminium/Albite composites at high temperature
Alloys and Compounds, vol.306 (2000) pp.270-276.
8 S.C.Sharma, B.M.Girish, R.Kamath, B.M.Satish
Effect of SiC particle reinforcement on unlubricated sliding wear behaviour of ZA-27 alloy composites
Wear, vol.213, 1997, pp.33-40
9 S.C.Sharma, B.M.Girish, R.Kamath, B.M.Satish
Mechanical properties of as- cast and heat-treated ZA-27 alloy/short glass fiber composites.
Journal of Materials Engineering and Performance, vol.7 (1)1998, pp.93-99.
10 S.C.Sharma, K.H.W.Seah, B.M.Satish B.M.Girish.
Corrosion characteristics of ZA-27/glass-fiber composites
Corrosion Science, vol.39, No.12, pp.2143-2150, 1997
11 S.C.Sharma, T.S.Srivatsan, T.S.Sudarshan.
Structures-mechanical property relationships in aluminium-zinc magnesium alloys.
Materials & Design, vol.15, No.5, 1994, pp.299-304.
12 S.C.Sharma S.R.Arun
Fabrication and evaluation of the mechanical properties of Al-alloy glass particulate
Journal of Materials Processing Technology, 38, 1993, pp.381-386.
13 S.C.Sharma, B.M.Girish, Somashekar R.Kamath, B.M.Satish
Sliding wear behaviour of zircon particles reinforced ZA-27 alloy composite materials.
Wear, Vol. 224, 1999, pp.89-94.
14 S.C.Sharma, B.M.Girish, Somashekar R.Kamath, B.M.Satish
Mechanical properties and fractography of zircon particles reinforced ZA-27 alloy composite materials.
Composites Science and Technology, 59(1999) pp1805-1812
15 S.C.Sharma, B.M.Girish, R.Kamath, B.M.Satish
Graphite particles reinforced ZA-27 alloy composite materials for journal bearing applications
Wear, Vol.219, 1998, pp.162-168.
16 S.C.Sharma, B.M.Girish, R.Kamath, B.M.Satish
Aging characteristics of short glass fibre reinforced ZA 27 alloy composite materials
Journal of materials engineering and performance, Vol.7 (6), 1998, pp.747-750.
17 S.C.Sharma, B.M.Girish, R.Kamath, B.M.Satish
Fractography, fluidity and tensile properties of aluminium hematite particulate composites
Journal of materials engineering and performance, Vol.8, No.3, June 1999, pp.309-314.
18 S.C.Sharma B.M.Girish R.Kamath B.M.Satish K. H. W. Seah
Hardness of aged ZA-27/short glass fibre reinforced composites
Materials & Design, vol.18, No.3, 1997, pp.155-159.
19 S. C .Sharma B.M.Satish B.M.Girish R.Kamath HiroshiAsanuma
Dry sliding wear of short glass fibre reinforced zinc-aluminium composites.
Tribology International vol.31, No.4, 1998, pp.183-188.
20 S. C .Sharma K.H.W.Seah B.M.Girish R.Kamath B.M.Satish
Mechanical properties and fractography of cast lead-alloy / quartz particulate composites
Materials & Design, vol.18, No.3, 1997, pp.149-153.
21 S. C .Sharma K.H.W.Seah B.M.Girish J. Venkatesh
Wear behaviour of lead alloy/zircon particulate composites
Materials & Design, vol.17, No.1, 1996, pp.27-32.
22 K.H.W.Seah, S.C.Sharma, J.Venkatesh, B.M.Girish
Corrosion behaviour of lead alloy/zircon particulate composites.
Corrosion Science, vol.39, No.8, pp.1443-1449, 1997
23 K.H.W.Seah, J.Hemanth, S.C.Sharma.
Effect of the cooling rate on the dendrite arm spacing and the ultimate tensile strength of cast iron.
Journal of Material Science, vol.33, 1998, pp.23-28.
24 K.H.W.Seah, J.Hemanth, S.C.Sharma
Fracture toughness of sub-zero chilled cast iron.
Journal of Material Science, vol.30, 1995, pp.4986-4993.
25 K.H.W.Seah, J.Hemanth, S.C.Sharma.
Wear characteristics of Sub-zero chilled cast iron.
Wear, 192, 1996, pp.134-140.
26 K.H.W.Seah, S.C.Sharma, B.M.Girish
Corrosion characteristics of ZA-27/Graphite particulate Composites.
Corrosion Science, vol.39, No.1, 1997, pp.1-7.
27 K.H.W.Seah, S.C.Sharma, B.M.Girish.
Mechanical properties of as-cast and heat-treated ZA-27/graphite particulate Composites.
Composites, Part A, 28A, 1997, pp.251-256
28 K.H.W.Seah, L.Lu, S.C.Sharma, J.Venkatesh, B.M.Girish.
Mechanical properties of as-cast and heat treated lead alloy/zircon particulate Composites.
Composites, Part A, 28A, 1997, pp.113-119.
29 K.H.W.Seah, S.C.Sharma, B.M.Girish.
Effect of artificial aging on the hardness of cast ZA-27/graphite particulate composites.
Materials & Design, vol.16, No.6, 1995, pp.337-341.
30 S.C.Sharma, K.H.W.Seah, B.M.Satish B.M.Girish.
Effect of short glass fibers on the mechanical properties of cast ZA-27 alloy composites.
Materials & Design, vol.17, No.5/6, 1996, pp.245-250.
31 K.H.W.Seah, A.Tucci, S.C.Sharma, B.M.Girish, R.Kamath.
Mechanical properties of cast lead alloy/silicon carbide particulate composites.
Materials & Design, vol.16, No.6, 1995, pp.367-371.
32 K.H.W.Seah, S.C.Sharma, B.M.Girish. S.C.Lim.
Wear characteristics of as-cast ZA-27/graphite Particulate composites
Materials & Design, vol.17, No.2, 1996, pp.63-67.
33 K.H.W.Seah, S.C.Sharma, B.M.Girish.
Machinability of alloyed austempered ductile iron.
Inter. Journal of machine tools & manufacturing, vol.35 No.10, 1995, pp.1475-1479.
34 K.H.W.Seah, J.Hemanth S.C.Sharma.
Corrosion behaviour of sub-Zero chilled cast iron.
Materials & Design, vol.15, No.5, 1994, pp.299-304.
35 K.H.W.Seah, S.C.Sharma.
Effect of heat treatment on the corrosion characteristics of aluminium-lithium alloys
Journal of Materials Science & Technology, vol.11, 1995, pp.385-387.
36 K.H.W.Seah, S.C.Sharma, R.S.Kulkarni, Ramachandra
Properties of cast hiduminium-corundum particulate composites.
Journal of Materials Science & Technology, vol.11, 1995, pp.171-175.
37 K.H.W.Seah, S.C.Sharma, R.S.Kulkarni, Ramachandra
Effect of using hiduminium- corundum composites as a substitute material for blade Manipulators.
Key Engineering Materials– MMC/ CMC, vol.104-107, 1995, pp.809-816.
38 S.C.Sharma Chowdaiah P.M.Jebraj, C.S.C.Murthy.
Localised corrosion of aluminium-lithium alloys.
Journal of Electro-chemical Society of India, IISc, Bangalore, 33, No.1, January 1989.
39 K.H.W.Seah, S.C.Sharma
Mechanical properties of aluminium/silicon carbide particulate composites.
Society of Manufactur ing Engineers, Dearborn, Michigan, USA, in SME, 1994, No.EM94-129-1-7.
40 K.H.W.Seah, J.Hemanth S.C.Sharma.
Ultimate tensile strength and fracture toughness of sub-zero chilled cast iron.
Society of Manufacturing Engineers, Dearborn, Michigan, USA, in SME, 1994, No.EM94-129-1-7.
41 K.H.W.Seah, S.C.Sharma, R.S.Kulkarni, Ramachandra
Machinability of hiduminium /corundum particulate composites.
Society of Manufacturing Engineers, Dearborn, Michigan, USA, in SME, 1994, No.EM94-153-1-11.
42 K.H.W.Seah, S.C.Sharma, R.S.Kulkarni, A.Ramchandra
Mechanical properties of as-cast and wrought hiduminium corundum particulate composites.
Materials & Design, vol.16, No.3, 1995, pp.151-154.
43 K.H.W.Seah, S.C.Sharma, R.S.Kulkarni, A.Ramchandra
Parametric studies of hiduminium/corundum particulate composites.
Journal of Materials Science & Technology, vol.11, 1995, pp.171-175.
44 K.H.W.Seah, S.C.Sharma, R.S.Kulkarni, A.Ramchandra
Hardness, wear resistance, & fracture toughness of cast hiduminium/corundum particulate composites.
Journal of Material Science & Technology, vol.12, 1996, pp.357-360.
45 K.H.W.Seah, S.C.Sharma
Corrosion characteristics of case aluminium-zinc-magnesium alloys.
Society of Manufacturing Engineers, Dearborn, Michigan, USA, in SME, 1995, No.EM95-265
46 K.H.W.Seah, S.C.Sharma B.M.Girish
Mechanical properties of cast ZA-27/graphite particulate Composites.
Composites, part A, Vol 28- A, 1997, pp. 251-256
47 K.H.W.Seah, S.C.Sharma B.M.Girish P.R.Rao
Mechanical properties of as-cast and heat-treated ZA-27/silicon-carbide particulate composites.
Materials & Design, vol.16,No.5, 1995, pp.277-281.
48 K.H.W.Seah, S.C.Sharma J.Hemanth
Tensile strength and hardness of sub-zero chilled cast iron
Materials & Design, vol.16, No.5, 1995, pp.175-179.
49 K.H.W.Seah, S.C.Sharma J.Hemanth
Effect of sub-zero chilling on the tensile strength of cast iron.
Society of Manufactur ing Engineers, Year book, 1994, Singa pore Chapter, 219.
50 K.H.W.Seah, S.C.Sharma
Fracture toughness of cast Al-Zn-Mg alloys.
Journal of Materials Science & Technology, vol.12, 1996, pp.191-202.
51 K.H.W.Seah S.C.Sharma B.M.Girish R.Kamath B.M.Satish
Effect of Artificial Ageing on tensile strength of ZA-27/short glass fibre reinforced composites
Journal of The Institution of Engineers, Singapore Vol.38,No 4 1998
52 K.H.W.Seah S.C.Sharma A.Ramesh
Mechanical properties of cast aluminium alloy 6061-albite particulate composites
Proc Instn Mech Engrs, Vol214 part L, pp 1-6.
53 S.C.Sharma Elastic behaviour of short glass fibre reinforced ZA-27 alloy metal matrix composites
Journal JMEPEG (2001) 10:468-474 of Materials Engineering and Performance, vol. (2001) pp.
54 S.C.Sharma A study of wear mechanism in particle reinforced aluminium metal matrix composites under sliding condition.
Accepted for publication in Journal of Materials Engineering and Performance.
55 S.C.Sharma J.Venkatesh B.M.Girish
Mechanical properties of lead alloy based composite materials for battery applications.
NML Technical Journal Vol.38. No.3, July-Sept 1996, pp. 95-100.
56 S.C.Sharma B.M.Girish P.R.Rao
Tribological properties of zinc alloy based composites for bearing applications.
NML Technical Journal Vol.38. No.3, April-June 1996, pp. 73-76.
57 S.C.Sharma B.M.Girish R.S.Kulkarni R.Kamath
Durability of zinc/graphite metal matrix composites
NML Technical Journal Vol.38. No.3, July-Sept 1996, pp. 127-131.
58 S.C.Sharma B.M.Girish R.S.Kulkarni R.Kamath
Machinability of Zinc alloy based Particulate metal matrix composites
NML Technical Journal Vol.38. No.3, July-Sept 1996, pp. 107-111.
59 S.C.Sharma K.H.W.Seah J.Hemanth K.V.S.Rao
Solidification behaviour of water-cooled and subzero chilled cast iron
Journal of Alloys and Compounds 290 (1999), pp. 172-180
60 S.C.Sharma K.H.W.Seah M.Krishna A.Ramesh
A study of the coefficient of Thermal Expansion of 6061Al-albite composites
Proc Instn Mech Engrs Vol 215 Part I
61 S.C.Sharma The Sliding wear behaviour of Al6061-Garnet particulate Composites
Wear 249 (2001) 1036-1045
62 S.C.Sharma
Equation for the density of particle-reinforced composites-A New Approach
Journal of Materials Engineering and Performance, vol. 12(3) 2003
63 S.C.Sharma K.H.W.Seah J.Hemanth
Mechanical properties of Aluminium /Quartz particulate composites cast
Alloys and Compounds, vol.306 (2000) pp.270-276.
64 G.Ranganath, S.C.Sharma, M.Krishna
Effect of garnet particle on the mechanical and microstrural properties of ZA-27 alloy composites
The Journal of Mechanical behaviour of Materials, vol. 12, No.4, (2001) 240-254.
65 G.Ranganath, S.C.Sharma, M Krishna M S Muruli
A study of Mechanical Properties and Fractography of titanium-dioxide particle reinforced ZA-27 alloy composite materials.
Journal of Material Engineering and Performance, vol.11(4), (2002) pp.408-413
66 S C Sharma Somashekar B M Satish
A note on the corrosion characterization of ZA-27/zircon particulate composites in acidic medium
Journal of materials Processing Technology, vol.118 (2001) pp62-64
67 S C Sharma B M Satish B M Girish Somashekar
Wear characteristics of phospoor-bronze/silicon carbide particulate composites
Journal of materials Processing Technology, vol.118 (2001) pp65-68
68 S.C.Sharma, Santa shastry M.Krishna
Effect of ageing parameters on the microstructure and properties of za-27/aluminite metal matrix composites
Journal of Alloys and Compounds, vol.346 (2002) pp.202-301
69 G.Ranganath, S.C.Sharma, M.Krishna
Evaluation of sliding wear behaviour of garnet particle reinforced ZA-27 alloy composites
Wear, vol.251, (2001) pp.1408-1413.
70 S C Sharma Santa Sastry M Krishna
Effect of aging parameters on the micro structure and properties of ZA-27 aluminite metal matrix composites
Alloys & Compounds vol.346(2002) pp.292-301
71 S C Sharma M Krishna Paual Vizhan Shashishankar
Thermal Effects on mild wear transition in dry sliding of aluminium-7075/short glass fiber composites
Jour. Automobile Engineering 2002, Vol 216 Part D: pp.975-982
72 KHW Seah J Hemanth SC Sharma
Mechanical Properties of aluminium/quartz particulate composites cast using metallic and non metallic chills
Materials & Design, vol.24 (2003) pp.87-93
73 S C Sharma H N N Murthy M Krishna
Interfacial Studies on the Fatigue behavior of PU sandwich structures
Journal of Reinforced Plastics and Composites, vol.23, 8, (2004) pp,893-903.
74 S C Sharma H N N Murthy M Krishna
Effect of foam Density and Skin Material on the Damping characteristics of PU Sandwich structures
Journal of Reinforced Plastics and Composites Vol.23, No. 12 (2004) pp-1259-1266
75 S C Sharma M Krishna H N N Murthy
Buckling response of stitched PU sandwich structures
Journal of Reinforced Plastics and Composites Vol.23, No. 12 (2004) pp-1267-1277
76 KHW Seah, J Hemanth, S C Sharma
Effect of high-rate heat transfer during casting on the strength, hardness and wear behaviour of aluminium quartz particulate metal matrix composites
Vol. 217, Part B, Jou. Of Engg. Mfg, pp. 651-659
77 M Krishna, S C Sharma HNN Murthy
Influence of Heat Treatment on the Property of Al6061/Albite Composites
Trans. Indian Institute of Metals, v.56(4) (2003) pp.309-408
78 G Ranganath S C Sharma, M Krishna H N N Murthy
Transitions in the sliding wear resistance of titanium oxide particle reinforced ZA-27 alloy
Trans. Indian Institute of Metals, v.56(4) (2003) pp.439-444
79 K H W Seah, SC Sharma, M Krishna
Mechanical properties and fracture mechanism of ZA-27/TiO2 particulate metal matrix composites
Jour of Materials, Design & Applications, vol. 217 Part L, pp.201-206
80 S C Sharma M Krishna A Shashishankar S Paul Vizhian
Damping Behaviour of aluminium/short glass fiber composites
Material Science and Engineering A, Vol. 364 (2004) pp.109-116
81 S C Sharma M Krishna A Ranganath
A study of Dynamic Mechanical Behaviour of ZA-27 Metal Matrix Composites
Journal of the mechanical behaviour of Materials, 144, (4-5),2003
82 S C Sharma S Paul Vizhian A Shashishankar M Krishna
Influence of Heat treatment on Microstructure and tensile properties of Aluminum E-glass short fiber composites
Journal of the mechanical behaviors of Materials, 144, (4-5),2003
83 S C Sharma M Krishna H N N Murthy D Bhattacharayya Sathyamoorthy
Fatigue behavior of PU sandwich structures
Journal of Materials and Performance (ASM International), vol. 13(5), 2004, pp.637-641.
84 S C Sharma, H N Narasimha Murthy and M Krishna
Low Velocity Impact Response of polyurethane Foam Composite Sandwich Structures
Journal of Reinforced Plastics and Composites, vol.23, (17) pp.1869-1882.
85 S C Sharma, M Krishna and H N Narasimha Murthy
Studies on the Effect of Residual Thermal Stresses on Thermal Expansion and Damping Behaviour of Al6061/ALBITE MMCs
Advances in Vibration Engineering vol.3 No.4 2004, pp. 320-331
86 S C Sharma, M S Murali, P G Mukunda & K S Keerthi Prasad
Modeling of solidification Indian Foundry Journal, vol.51 (11), 2005, pp.43-48
87 S C Sharma, Ramakanth Kumar Doreswamy H, Sharath V
Document Mosaicing using modified list Data Structures
Journal of Analysis and Computation, Vol.1 No.2, (2005) pp.121-139,
88 Rajashekhar Algood , S C Sharma, Sayed Akeel Ahmed and Prashanth T
Mechanical Property Evaluation of Polyurethane based Epoxy and polyester Alloys
The Journal of CPRI, vol.2 (2) (2005) pp.187
89 S C Sharma M Krishna H N Narasimha Muthrty Saneevamurthy
Studies on the Weathering Behavior of Glass Coir Polypropylene Composites
Journal of Reinforced Plastics and Composites, Vol.25, (9), (2006) pp.925-932.
90 S C Sharma M Krishna HNNarasimha Murthy
Delamination during drilling in polyurethane foam composite sandwich structures
Journal of Materials Engineering and Performance, vol.15(3) June 2006.
91 S C Sharma M Krishna HNNarasimha Murthy R Tarachandra, M Satyamoorthy D Bhattacharyya
Study of corrosive-erosive wear behaviour of Al6061/albite composites
Materials Science and Engineering, A, Vol 425 (2006) pp.305-311.
92 S. C Sharma, R.Algood, A A Syed, A V Rajulu & M Krishna
Compression properties of E-glass / Polyurethane Composites
Journal of Reinforced Plastics and Composites, vol.25 (14) pp. 1445-1447.
93 S C Sharma, M Krishna & D Bhattacharyya
Dry Sliding Wear Behaviour of Flyash Reinforced ZA-27 alloy Based Metal Matrix Composites
International Journal of Modern Physics B, vol.20 (25,26 & 27), pp-4703-4708.
94 S C Sharma, Narayanappa M Krishna, H N Murthy
Numerical study of Functionally graded Materials
Advanced Materials Research vol. 29-30 (2007) pp.311-314
95 S C Sharma, M Krishna, H N Murthy
Corrosive-Erosive Wear Studies of Al6061/Albite Composites
Materials Science Forum, Vol.339-349 (2007) pp.751-755
96 S C Sharma, T S Sheshadri, M Krishna, H N N Murthy Jeena Jose
Influence of solvents on the MWCNT / adhesive Grade epoxy nanocomposites preparation
Accepted for Journal of Reinforced Plastics and Composites
97 S C Sharma, T S Sheshadri, M Krishna, H N N Murthy
Neural network based prediction of electric discharge Machining of al/garnet metal matrix composites
Submitted to Journal of Materials Engineering and Performance
98 S C Sharma, T S Sheshadri, M Krishna, H N N Murthy
Effect of magnesium addition on the corrosion properties of al/e-glass short Fiber composites
Submitted to Corrosion Science
99 S C Sharma, T S Sheshadri, M Krishna, H N N Murthy
Numerical technique for efficient penetration of the imapactor
Submitted to SIAM Journal on Numerical Analysis
100 S C Sharma, T S Sheshadri, M Krishna, H N N Murthy
Seawater durability OF epoxy / vinyl ester Reinforced with GLASS / carbon composites
Submitted to Journal of Composites Science
101 T.S.Sheshadri, S.C.Sharma, Prakash Parasivamurthy
Crumb rubber wastes in cement stabilized soil blocks- an investigation
Journal of Materials Cycles and waste management
102 T.S. Sheshadri, Dr.S.C.Sharma, Prakash Parasivamurthy
Fly ash added cement stabilized soil blocks-an investigation
The Journal of Solid Waste Technology and Management
103 T S Sheshadri, S C Sharma, N Shanmukha, M S Vinod, Alok Shankar
Finite element analysis of pre-stressed fasterner holes for optimum fatigue performance in Al aluminium alloy
Journal of Engineering Materials and Technology
104 G S Mamatha Dr. S C Sharma
Analyzing the magnet variations, challenges, capacity and protocol issues
International Journal of Computer Science and Engineering Survey (IJCSES), vol. 1(1) (2010), pp.14-20
105 G S Mamatha Dr. S C Sharma
A robust approach to detect and prevent Network layer attack Layer attacks in MANETS
International Journal of Computer Science and Security, vol. 41(3) 2010, pp. 275-283
106 G S Mamatha Dr. S C Sharma
A highly secured approach against attacks MANETS
International Journal of computer theory and Engineering, vol.2 (3), (2010), pp. 815-819
107 G S Mamatha Dr. S C Sharma
Network layer attacks and defense mechanisms in MANETS-A survey
International Journal of Computer Applications, vol. 9 (9), 2010, pp.12-17
108 L Kodandarama M Krishna HN Narasimha Murthy S C Sharma
Effect of Electro-co-deposition parameters on Nickel-Tungston-Carbide Composite Coatings
Submitted to Surface and Coating Technology
18. RESEARCH PAPERS PRESENTED / PUBLISHED IN NATIONAL / INTERNATIONAL CONFERENCES
Sl. No
Title of the paper Conference
1 Intergranular corrosion of aluminium-lithium alloys 2 Variations in casting characteristics with composition
of aluminium alloys 3 A study of relationship between the fracture toughness
& tensile properties in a high strength aluminium-zinc-magnesium alloy
4 Effect of grain size on fracture toughness in high strength aluminium-zinc-magnesium alloy
5 A study of intergranular fracture mechanism in high strength aluminium-zinc-magnesium alloy
National Seminar on Materials for Advanced Technology, Indian Institute of Metals, Trivandrum, January 24-25, 1989
6 The machinability of aluminium-zinc-magnesium alloy system as a function of zinc content
7 Solution of inverse kinematic equations for robot manipulator
8 Tool/work interface friction coefficient of aluminium-zinc-magnesium alloy system as a function of zinc content
1st Intel. Applied Mechanical system Design Conference (AMSDC-1), Dept. of Mechanical Engg. Tennessee Technological University, U.S.A., June 1989.
9 Fracture toughness and fractography of aluminium-
zinc-magnesium alloy system International Metallographic societies, North Carolina, U.S.A., June 1989.
10 Corrosion behaviour of aluminium-zinc-magnesium alloys cast in chloride media
Surathkal, Regional Engineering College, Metallurgy & Development, March 1989.
11 Pollution in key industries in India
12 Industrial wastes and air pollutants
13 Industrial wastes and transport exhaust in environmental pollution
National Young Scientists Seminar on Environmental Pollution, University of Agriculture & Science, Bangalore, March 1989.
14 Corrosion studies of aluminium-lithium alloy system 15 Fabrication of composites of silicon reinforced
aluminium alloys
Jawaharlal Nehru Centenary Celebrations, Science & Technology Seminar Series on Composite & Adhesives, Bangalore, 28-30, September 1989.
16 Corrosion and mechanical properties of aluminium-zinc-magnesium alloys
17 Fracture toughness of cast aluminium alloys
2nd International Conference on Aluminium Alloys, Their Physical & Mechanical Properties, Beijing University of aeronautics & astronautics, Beijing, China, 15-20, June 1990.
18 Hot tearing in binary aluminium-copper alloys 19 Fabrication of composites of silicon reinforced
aluminium alloys
International conference, University of Toronto, Ontario, Canada, June 3-9, 1990.
20 The present and future scenario of mechanical engineering curriculum with case studies
4th Day Program on future studies, FORECASTING TECHNOLOGY ASSESSMENT AND PERSPECTIVE PLANNING, 20-23 August, 1990, Ministry of Science & Technology, Government of India.
21 Ceramic tools wear resistance International conference, University of Toronto, Ontario, Canada. June 3-9, 1990.
22 Fabrication and characterization of aluminium alloy feldspar particulate composites
NAMRC XVIII, Annual Meeting & Conference, Pennsylvania, U.S.A. May 23-25 1990.
23 Fabrication and testing of flyash dispersed aluminium-zinc-magnesium-copper high strength particulate composites
NAMRC XVIII, Annual Meeting & Conference, Pennsylvania, U.S.A. May 23-25 1990.
24 Intergranular and pitting corrosion behaviour of aluminium 6061-silicon cast and wrought composites
25 Corrosion studies of 5, 7 & 12% aluminium-zircon composites
26 Study of mechanical properties of aluminium-feldspar composites
27 Evaluation of mechanical properties of silicon composites
14th Annual Conference on Composites & Advanced Ceramics Engineering Ceramics Division, Cocoa Beach, Florida, U.S.A., January, 14-17, 1990.
28 Mechanical properties and fractography of aluminium-zinc-magnesium alloys
International Conference on Advances in Structural Testing, Analysis & Design 29th July, 3 August 1990, Indian Institute of Science.
29 Evaluation of machining characteristic of aluminium-zinc- magnesium alloy system as a function of zinc content
30 Robotics manipulators
NAMRC, XVIII Conference, Pennsylvania, U.S.A. May 23-25, 1990.
31 Futurology a mechanical engineer’s perspective Two day Workshop Program on Introduction of Futurology on higher education, organized, Bangalore University & Department of Science & Technology, Government of India, October 11-12, 1989.
32 Corrosion studies of aluminium-zircon particulate composites
American Ceramic Society Inc., Dallas, Texas April 23, 1990.
33 Recent development in the field of aluminium-lithium alloy technology
34 Analysis of chips in machining of aluminium-lithium alloys
35 Preparation and evaluation of mechanical properties of aluminium-quartz composite
36 On of fracture toughness & mechanical properties of talc dispersed aluminium-zinc-magnesium-copper high strength particulate composite
Lightweight Alloys for Aerospace Application, TMS Annual Meeting, February 17-21, 1991, Florida.
37 Study of cast aluminium-hematite particulate composite with respect to its machinability
5th Triannual Conference on Mechanical Design & Production (MDPS), Cairo University, 1991.
38 Preparation and property evaluation of aluminium-kyanite, aluminium-boron, aluminium-zircon particulate composites
39 Chip-Strain evaluation of aluminium-quartz particulate composite
40 Electron microscopy and its application in the analysis of fractured surfaces of aluminium-zinc-magnesium – hematite alloy specimens
41 Preparation and property evaluation of aluminium-corundum particulate composites
The Indian Institute of Metals, Trivandrum Chapter, 24-25 January 1991, Trivandrum.
42 Preparation and mechanical properties of aluminium-calcite particulate composites
43 Corrosion of aluminium-garnet particulate composites in acidified sodium chloride medium
6th International Conference on Mechanical Behaviour of materials, The Society of Materials Science, Japan, 1991.
44 Localized corrosion behaviour of aluminium-mica metal matrix composites
45 Corrosion resistance of aluminium – sillimanite particulate composite in 1N H2SO4 and 1N NaCl electrolytes,
46 Polarization studies on aluminium – dolomite particulate composites in 1N H2SO4,
Symposium on Corrosion of Ceramics & Advanced Materials, The Electrochemical society Inc., Meeting in Washington, D.C., U.S.A. on May 5-10, 1991.
47 The industrial, economic and environmental dimensions of recycling
The International Conference on Recycling of Metals, Dusseldorf, Germany, 13-15 May 1992.
48 Development of titanium-OT41 alloy 7th World Conference on Titanium, San Diego, USA, June/July 1992.
49 Solution to the inverse kinematic equations of robot manipulator
International Conference on Manufacturing Automation, University of Hong Kong, August 10-12, 1992, Hong Kong.
50 Fracture characterization of aluminium-glass metal matrix composite
IRC’92, processing & application of materials September 7-10, 1992,
51 Chip strain evaluation of aluminium-dolomite particulate composite
52 Preparation of advanced aluminium-glass ceramic particulate composite & evaluation of mechanical & corrosion behaviour
53 Mechanical property evaluation & machinability studies of aluminium-lithium alloys
54 Aluminium-zircon metal matrix composites-analysis of atomic structure
University of Birmingham, UK.
55 Fabrication & evaluation of mechanical properties of aluminium alloy glass particulate composite
Asia Pacific Conference on Materials Processing, Singapore, 23-25 February 93.
56 Corrosion studies on aluminium – lithium alloys International Conference on Energy, Environment & Electrochemistry, Central Electrochemical Research Institute, Karaikudi, February 10-12, 1993, India.
57 Corrosion studies on high strength aluminium lithium alloys for aerospace applications
58 Corrosion studies of advanced high strength aluminium - zircon particulate composites
3rd National Congress on Corrosion Control, National Corrosion Council of India, December 10-11, 1992, Karaikudi, Madras, India.
59 Corrosion studies of advanced high strength aluminium - zircon particulate composites
60 Mechanical property evaluation of aluminium- staurolite particulate composites
61 Mechanical property evaluation of aluminium - calcite particulate composites
62 A study on the preparation and properties of aluminium - zircon particulate composites
University of Wollogong, Australia held during February 15-19, 1993.
63 Fracture studies of stainless steel International Symposium on Fatigue and Fracture in Steel & Concrete Structures, 19-21, December 1991, Madras (ISSF 91), Structural Engineering. Division (CSIR), Madras, India
64 The present and future scenario of mechanical engineering education with case studies
65 Futurology: mechanical engineers’ perspective
All India Seminar on Mechanical Engineering Education, 28-29, October 1991, Institution of Engineers (India), AP State Center.
66 Fractographic analysis of aluminium-zinc-magnesium alloys as a function of zinc content using SEM
5th Asia Pacific Electron Microscopy Conference, August 2-6, 1992, Beijing, China.
67 Corrosion studies on aluminium-lithium alloys International Conference on Energy Environment & Electro-Chemistry, Central Electro Chemical Research Institute (ISIR), Karaikudi, 10-12, Feb 93.
68 Effect of sub zero end chill on the macro properties of grey cast iron
2nd Asia Pacific Conference on Material Processing scheduled, National University of Singapore, 16-18, November 1994.
69 Wear resistance properties of austempered ductile iron 70 Mechanical property evaluation of austempered ductile
iron 71 Industrial production of austempered ductile iron
International Conference on Mechanical Behavior of Ductile Cast Iron & Other Cast Metals, ICDI-93, JSMEMMD, Kitakyushu, Japan, July 30 – August 1, 1993.
72 The present and future scenario of mechanical engineering curriculum
International Conference on Engineering Education ’93, National University of Singapore, 10-12 November 1993.
73 Fatigue and fracture behavior of aluminium-lithium alloys
74 Drill force evaluation of aluminium-lithium alloys 75 Effect of composition and heat treatment on
intergranular corrosion of aluminium-lithium alloys 76 Effect of aging on localized corrosion of aluminium-
lithium alloys 77 Machinability studies on aluminium-lithium alloys 78 Weld tests on aluminium-lithium alloys 79 Effect of sub-zero end chills on the wear properties of
cast iron 80 Influence of refrigerants on the mechanical properties
of cast iron 81 Influence of refrigerants on the mechanical properties
of cast iron
APMT’93 International Conference, August 24-27, 1993, Dublin city University, Ireland.
82 Fracture toughness of chilled, alloyed grey cast iron 31st Aircraft Symposium, The Japan Society of Aeronautical & Space Sciences, Kyushu University, Japan, 1993.
83 Corrosion properties of chilled, alloyed grey cast iron The Japan Society of Aeronautical & Space Sciences, Kyushu University, Japan, 1993.
84 Recycling of aluminium matrix particulate composites The Materials Information Society, Amsterdam, 19-21 October 1994.
85 Reducing the cost of production using recycling process in aluminium industry
2nd Recycling of Metals Conference, The Materials Information Society, Amsterdam, 19-21 October 1994.
86 Composites-An overview 2nd International Symposium on Metallurgical Processes for the Year 2000 & Beyond, 1994 TMS Extraction & Process Metallurgy, San Diego, California, USA during September 21-23, 1994.
87 Effect of sub-zero end chill on the corrosion properties of cast iron
88 Effect of Subzero end chill on the properties and soundness of cast iron
89 Mechanism of heat transfer during subzero cooling of cast iron
JSASS 32nd aircraft symposium, Chofu, Tokyo, Japan.
90 Fatigue characteristics of high strength aeronautical aluminium alloys at predetermined service temperature
3rd International Colloquium Aging of Materials & Methods for the
91 Effect of aging behavior on the creep rupture behavior of aluminium lithium alloys
Assessment & Extension of Life Times of Engineering Plants, Cape Town, Republic of South Africa during 27-31 March 1995.
92 Development of aluminium-copper-graphite particulate composite and its use as antennae material
93 Preparation and property evaluation of lead zircon composites
International Conference on Advances in Materials & Processing Technology, Dublin city University, Dublin, Ireland, 08-12 August 1995.
94 Recycling of ceramic particulate reinforced aluminium metal matrix composites
3rd International Symposium on Recycling of Metals and Engineered Materials, 1995 TMS Fall Extraction & Processing Meeting, Marriott’s Grand Hotel, Point Clear, Alabama during 12-16, November 1995
95 Effect of aging on the creep rupture behavior of aluminium lithium alloys
96 Effect of aging on the microstructure and mechanical properties of aluminium lithium alloys
International Symposium on “Materials Aging & Component Life Extension”, CISE-Milan, Italy, 13 to 15 September 1995.
97 Titanium and its alloys-An overview Symposium on Advances in the Science and Technology of Titanium Alloys Processing, TMS, The Titanium and Shaping and Forming Committees, Anaheim, California, USA, Feb. 4-8, 1996.
98 Machinability criteria and parametric machining in aluminium-lithium-zircon metal matrix composites
99 Cast aluminium-copper-graphite particulate metal matrix composites
100 Cast lead alloy/zircon particulate metal matrix composite
101 A study on graphite and silicon carbide reinforced ZA-27 alloy composite materials
1996 TMS Fall Meeting/Materials Week, to be held at Cincinnati, Ohio, USA during 6-10, Oct. 1996.
102 Development of Zinc-Graphite Composites and its use as a Structural Material in Bearings
103 Performance of Aluminium-Glass Particulate composites in Wear Resistance Applications
104 Development of Aluminium-Silicon Carbide Composites for High Temperature Gas Turbine Applications
Symposium of Mechanics in Design, Canadian Society for Mechanical Engineering (CSME Forum 96), Toronto, Ontario, Canada, during 7-9 April 1996.
105 Property Evaluation of Zinc-Graphite Particulate Composites
106 Mechanical Properties of Lead-Zircon Particulate Composites
107 Design and Development of Aluminium-Silicon Carbide Particulate Composites
108 An Evaluation of Mechanical Properties of Aluminium-Copper-Graphite Particulate Composites
109 Preparation of Zinc-Silicon Carbide Particulate Composites and its Property Evaluation
110 An Evaluation of Properties of Aluminium-Flyash Particulate Composites
111 Effects of Glass Particle Addition on the Behaviour of Aluminium-Glass Particulate Composites
59th Annual Session of the Indian Ceramic Society, Madras during 10-11 January 1996.
112 Effects of Corundum on Hiduminium RR350-Corundum Particulate Composites
113 A Study on the Properties of Aluminium-Haematite Particulate Composites
59th Annual Session of the Indian Ceramic Society, Madras during 10-11 January 1996
114 Evaluation of corrosion resistance of aluminium-copper-graphite particulate composites
115 Mechanical Properties evaluation of aluminium-copper-graphite particulate composites
116 Thermomechanical Properties of aluminium-lithium alloys
117 Fatigue of aged aluminium-lithium alloys at elevated temperature
5th International Conference on Aluminium Alloys, Their Physical & Mechanical Properties, Grenoble-France, July 1-5, 1996.
118 Machinability studies on Aluminium-copper-graphite particulate composites
119 Machinability of Zinc-Graphite particulate composites 120 Drillability of Zinc-Graphite particulate composites 121 Fabrication of Lead-Zircon particulate composites and
its property evaluation 122 An Evaluation of Machinability characteristics of Zinc-
Silicon Carbide particulate composites
3rd Asia Pacific Conference on Materials Processing, Hong Kong, 12-14 November 1996.
123 Casting and characterization of lead alloy-zircon composites
The International Conference of Maintenance, Inspection, Corrosion, Metallurgy and Plant Reliability, Baroda, 18-20 January 1996.
124 Casting and characterization of zinc alloy based particulate metal matrix composites
125 Casting and characterization of aluminium-copper-graphite particulate metal matrix composites
126 Development of lead alloy-zircon particulate metal matrix composite
127 Drillability of Zinc-Graphite particulate composites
International conference on ceramic and metal matrix composites, San Sebastian, Spain, 9-12 September 1996.
128 Wear behaviour of ZA-27 alloy/glass fiber composites 3rd ASM International Paris Conference; Synthesis, Processing and Modeling of Advanced Materials, Paris, France,25-27 June 1997
129 Mechanical and Tribological behaviour of ZA-27/graphite particulate composites
130 Effect of graphite particles on the bearing performance of ZA-27 alloy composite for application in automobiles
131 Wear behaviour of ZA-27/silicon carbide particulate composites for bearing applications in automobiles
3rd ASM International Paris Conference; Synthesis, Processing and Modeling of Advanced Materials, Paris, France,25-27 June 1997
132 Effect of graphite particles on the bearing performance of ZA-27 alloy composite for application in automobiles
133 Mechanical Property evaluation of aluminium alloy /hematite particulate composites
Advances in Materials and processing Technologies (AMPT’ 1997) Guimaraes, Portugal, 22-26 July, 97.
134 Processing and properties of ascast ZA-27 alloy composites reinforced with short glass fibres
135 An evaluation of wear behaviour of ZA-27 alloy composites reinforced with silicon carbide particles
6th International Conference on Processing and Fabrication of Advanced Materials (PFAM-6), Singapore, 24-26 November 1997.
136 Graphite reinforced ZA-27 alloy composite – A bearing material for application in automobiles
European Conference on Composite Materials – 8 (ECCM-8), Naples, Italy, 3 – 6 June, 1998.
137 Short glass fibres reinforced ZA-27 alloy composites for journal bearing application in automobiles
138 SiC particles reinforced copper alloy composite materials for wear resistant applications in automobiles
31st International Symposium on Automotive Tech. & Automation 31-ISATA, Dusseldorf, Germany 2 – 5th June, 1998.
139 Short glass fibers reinforced ZA-27 alloy composites for journal bearing applications
140 Effects of fly ash particles on the wear behavior of ZA-27 alloy composites
7th International Conference on Processing & Fabrication of Advanced Materials (PFAM VII) Rosemont, Illinois, USA, October 11-15 1998.
141 Importance of industrial training and new technologies in engineering education
Global Congress on Engineering Education, UNESCO International Centre for Engineering Education, 6-11 September 1998, Poland.
142 Effects of zircon particles on the wear behaviour of ZA-27 alloy composites
143 An educational overview of this global perspectives of materials and their processing for developing countries
4th International Conference on Advances in Materials & Processing Technologies, Koulalumpur, Malaysia, 24-28 August 1998
144 Corrosion characteristics of ZA-27/zircon particulate composites in acidic medium
8th International Conference on Mechanical Behaviour of Materials, Victoria, British Columbia, Canada, May 16-21, 1999.
145 Wear characteristics of phosphor bronze/SiC particulate composites
146 Agenda for a brave new world – 2000 AD, presented at the 2nd Asia Pacific Forum on Engineering & Technology Education
147 Distance education and open learning, presented at the 2nd Asia Pacific Forum on Engineering & Technology Education
University of Sydney, Sydney, Australia, 4-7 July, 1999.
148 Wear characteristics of phosphor bronze/SiC particulate composites
149 Corrosion characterization of ZA-27/Zircon Particulate Composites in Acidic Medium
International Conference on Advances in Materials & Processing Technologies, AMPT 99 and 16th Annual Conference of the Irish Manufacturing Committee – IMC 16, Dublin City University, Dublin, Ireland, August 3-6, 1999.
150 A study on the mechanical properties of as-cast and heat-treated ZA-27 alloy/short glass fiber composites
EUROMAT’99, International Congress on Advanced Materials and Processes, International Congress Centre, Munich, Germany, 27-30 September, 1999.
151 A study on the mechanical properties of as-cast and heat-treated Al(6061) alloy/albite metal matrix composites
152 A quantitative analysis of coefficient of thermal expansion of albite reinforced Al6061 MMCs
6th Japan International SAMPE Symposium & Exhibition, Tokyo Big City, Tokyo, 26-29, October, 1999.
153 A study on the sliding wear behaviour of phosphor-bronze alloy composites
2nd International Conference on Industrial Tribology, Hyderabad, 1-4, December, 1999.
154 Oxidation behaviour of aluminium-albite composites at higher temperature
International Scientific Practical Conference on “Modern Technology in Aerospace Complex” Zhitomir Institute of Engineering and Technology, Ukraine, September 7-9, 1999.
155 Academy and industry collaboration
156 Sustainable development and environmental engineering education
3rd Baltic region seminar, Goteborg, Sweden, 3-5 September 1999.
157 Evaluation of sliding wear behaviour of flyash microsphere reinforced aluminium 7075 alloy composites
National Seminar on Bulk Utilisation of Flyash (BUFA 2000) March 18-19, 2000, Annamalai, Tamilnadu.
158 A study of heat treatment on mechanical properties of aluminium 6061-garnet metal matrix composites
159 Effect of garnet particulate reinforcement on the dry sliding wear of aluminium-6061 alloy
International Meeting on Composite Materials, May 9-11, 2000, Milano Fiera, Italy.
160 Flyash precipitate reinforced Al-7075 alloy composite materials for journal bearing applications
161 Sliding Behaviour of Garnet Particles Reinforced ZA-27 alloy Composites Materials
162 The Sliding Wear Behaviour of Al-6061-Garnet Particulate Composites
National Symposium on Recent Advances in Experimental Mechanics, IIT, Kanpur, March 15-16, 2000.
163 Thermal Mismatch Stresses in a Metal Matrix Composite – A Finite Element Analysis
164 Study on the Mechanical Properties of ZA-27 Alloy Reinforced with Quartz Particles
TMS Minerals-Metals-Materials, 2000 Fall Meeting, October 8-12, 2000, Regional Riverfront Hotel, St.Louis, Missouri.
165 Dry sliding wear of garnet particulate reinforced ZA-27 alloy co
13th International Conference on Wear of Materials 2001, Vancouver, British Columbia, Canada, 22-26 April 2001
166 A Study on Damping Behavior of Garnet Particle Reinforced ZA-27 alloy Metal Matrix Composites
167 Effect of Short Glass Fibers on the Coefficient of thermal Expansion Behavior of the Al7075 Alloy Composites
168 Tribological Studies on ZA-27 Alloy Based Metal Matrix Composites
Future Trends in Mechanical Engineering Research & Development, XVI National Convention of Mechanical Engineers & National Seminar, University of Rookee, & The Institution of Engineers (Inida) Roorkee Local Centre, Roorkee, India, September 29-30, 2000.
169 Effect of ageing parameter on the microstructure and properties of al6061/albite composites
Invited paper held between 1 & 7 July 2001, ICMAT 2001, University of Singapore,
170 Effect of Thermal Stresses on the thermal expansion and damping behaviour Al6061/albite MMCs
AMPT 01, International Conference on Advances in Materials and Processing Technologies, September 18-21, 2001, Legnes, Madrid, Spain
171 Effect of Ageing Parameter on The Microstructure and Properties of Al6061/albite composites
172 Effect of Short Glass fiber on the Mechanical Properties and Fracture of the Polyurethane composites
173 An Internet-Enabled Technology to support Flexible Manufacturing systems
Proceedings 17th National Convention of Mechanical Engineers, Indore, 26-27 November 2001.
174 Evaluation of mechanical properties of Aluminium based hybrid composites
175 Corrosion studies on Aluminium based hybrid metal matrix composites
176 On-line Shopfloor control for a High-tech Medical Equipment Company
177 Some studies on aging behaviour of al6061/albite composites,
178 Evaluation of mechanical properties of polyurethane-e glass fiber reinforced composites
Accepted for presentation at A National Conference on recent trends in Manufacturing technology and Management at Hosure
179 Effect of Aging on Oxidation Behavior of magnesium/SiCp Composites at High Temperatures
A National Conference on recent trends in Manufacturing technology and Management at Hosure28-29 January 2002. pp.197-205.
180 Evaluation of Machining Characteristics of Al7075/E-glass short Fiber composites
181 Review of Polyurethane’s in Composites
182 Dry Sliding Wear Behaviour at Ambient and Elevated Temperatures of Al/Glass Composites
183 Studies on Effect of Residual Thermal Stresses on the Thermal Expansion and Damping Behaviour of Al6061/Albite MMCs
National Seminar on Processing, Characterization and Applications of Light Structural Materials for Frontier Sectors, The Indian Institute of Metals Trivandrum Chapter 14-15 February 2002.
184 Finite element modeling of 3-D Braided E-Glass Polyurethane Elastomers Tubes
185 Thermal Mismatch stresses in a metal matrix composite-A Finite Element Analysis
186 An Internet-Enabled Technology to support flexible Manufacturing Systems
Proceedings of National Conference on Recent Trends in CAD/CAM, Kakinada, 30th March 2002
187 A study of the Fatigue behaviour of polyurethane sandwich structure
Fourth National Symposium of Research Scholoars on Metals and Materials (NSRS-4, 2002), The
188 Comparative study of curing methods for Pu/e-glass elastomers
189 Influence of Heat Treatment on the properties of Al6061/Albite Composites (ARCI BEST PAPER AWARD)
Indian Institute of Metals, Chennai Chapter, IIT Madras, Chennai 27th – 28th September 2002.
190 Neural Network approach of predicting stock market International at ICSP International Conference at Hyderabad, Feb 2004
191 e-market integrator ICSP International Conference, Beiging, China, Aug-2004
192 Optical character recognition ICEE, International Conference in USA
193 JAVA Code Generator for PL/SQL warehouse generator
International Conference at Chennai, Aug 2004
194
Effect of Mica on the Properties of ZA-27 Alloys Composites
195 Comparative Studies on Mechanical Properties of Aluminium Based Hybrid Composites Cast by Liquid Melt Technique and P/M Route.
Materials Processing for Properties and Performance (MP3) Volume 3, Institute of Materials (East ASIA), Singapore Institute of Manufacturing Technology.
196 Morphology and Mechanical property Studies of Polyurethane Based Alloys
197 Evaluation of Young’s Modulus and Poisson’s ratio along Non-Principal Material Directions Using Finite Element Techniques on Composite Materials
198 A Study of Effect of resin content on non-destructive characteristics of composites
International Symposium on Advanced Materials and Processing, ISMAP2K4, 6-8 December 2004, IIT, Khargpur, India
199 Mechanical Behaviour and Fracture Analysis of fly ash reinforced Composites
Proceedings of International Conference on Advanced Materials Development & Performance, Auckland
200 An Equation for CTE of Particle Reinforced MMCs – A New Approach
Proceedings of International Conferences on Composites / Nano Engineering, 2005, Spain
201 Evaluation of Tensile Properties of cold expanded hole for improved Fatigue life
202 Stress Analysis & Evaluation of Fatigue properties using Pre-stressing process
Proceedings of 9th International Fatigue congress-2006, Atlanta, USA
203 Study of Corrosive-Erosive Wear Behaviour of Al6061/Albite Composites
Proceedings of International conference on Processing & Manufacturing of Advanced Materials, THERMAC’ 2006, Vancouver, Canada
204 Fatigue performance of cold expanded holes in Al7050 alloy
16th International Conference on Processing and Fabrication of Advanced Materials PFAM-16 Singapore, 17 -19th December 2007
205 Nanomaterials & Synthesis of Nonmaterial Deliver lecture as a Visiting Scientist at Department of Aerospace Engineering, IISc, Bangalore.
206 Seawater Durability of Vinylester/Glass and Epoxy/Glass Composites for Marine Applications
Proceedings of National Conference: Advances and Contemporaries in Mechanical Engineering- ACME-2008 February 07-08, 2008, Mechanical Engineering Department of Erode Sengunthar Engineering College, Thudupathy, Erode, TamilNadu
207 Hygrothermic Behavior of Carbon/Glass Reinforced Epoxy/Vinylester Composites
International Conference-ISRS-2008, IIT Chennai
208 Effective dispersion of MWCNT into Epoxy Encapsulant and the Resulting Electrical and Thermal Conductivities
National Conference: Advances and Contemporaries in Mechanical Engineering- ACME-2008 February 07-08, 2008, Mechanical Engineering Department of Erode Sengunthar Engineering College, Thudupathy, Erode, TamilNadu
209 Dispersed Epoxy Nanocomposite for Enhanced Electrical Conductivity and Thermal Conductivity MWCNT/CNP
International Conference od Aerospace Scince and Technology (NAL 50- INCAST) June 26-28, 2008, NAL Bangalore
210 MWCNT/Carbon black dispersed into Structural Adhesive (Epoxy) Using Twin Screw Extruder for improved Electrical conductivity
International Conference-ISRS-2008, IIT Chennai
19. OVERSEAS RESEARCH AND ACADEMIC ASSIGNMENTS
Sl. No Duration of Visit Institute and the
Country visited Purpose
1
08-15, July 89 Syracuse and Tennessee Technological University, USA
Paper presentation at the International Seminar
2 15-23, July 89 University of Wisconsin, Milwaukee, USA
Delivered lecture on Fracture & machinability of aluminium-zinc-magnesium alloys
3 10 April, - 10 July 90
Texas A & M University University of Texas at Arlington University of Texas at Austin West Virginia Institute of Technology University of Wisconsin Southern Methodist University Carnegie Mellon University University of Pittsburgh University of Oklahoma SUNY at Binghamton Syracuse University
Deliver guest lectures on research work in India, exchanging newer ideas on production processes, materials engineering etc.
4 20-25 June 90 University of Wisconsin, Milwaukee Delivered lecture on Al/zircon composites
5 22-26, April 90 American Ceramic Society Inc., Dallas Texas, USA
Paper presentation at the International Seminar
6 15-20, August 90
Beijing University of Aeronautics & Astronautics, China
Paper presentation at the International Seminar
7 21 Aug..- 2 Sept. 90.
Hiroshima University and other University, Japan
Visiting Scientist to discuss newer developments in metal matrix composites
8 18-24, March 91 Monash University, Melbourne, Australia
Pedantic talk on Metal Matrix Composites
9 05-10, May 91 Electrochemical Society, Washington, USA.
Paper presentation at the International Seminar
10 07-10, Sept. 92 University of Birmingham, UK
Paper presentation at the International Seminar
11 1992 University of Wisconsin, Milwaukee As Visiting Scientist 12 23-25, Feb, 93 National University of Singapore,
Singapore Paper presentation at the International Seminar
13 16-18, Nov 94 National University of Singapore, Singapore
Paper presentation at the International Seminar
14 27-31, March 95 Cape Town, Republic of South Africa Paper presentation at the International Seminar
15 08-12, Aug 95 Dublin City University, Dublin, Ireland Paper presentation at the International Seminar
16 18-29, Jan, 96 Centro Ceramico, Bologna, Italy Technical interaction 17 14-21, April 97 Chiba University, Japan
Technical interaction
18 27 May – 2 July 98
Chiba University, Japan Delivered lectures on composite materials
19 13-22, May 2K Arigatou Foundation, Tokyo, JAPAN Technical interaction 20 18-21 May 2001 Singapore National University Collaborative research work
21 17-19 May 2004 2nd forum of GNRC, Arigata Foundation
Technical Interaction
22 04-06 October 2004
Leonard C Nelson College of Engineering, West Virginia University Institute of Technology, Montgomery
Presented Research at Graduate Seminar
23 24-26 November 2004
3rd International Conference on Materials Processing for Properties and Performance (MP3), School of Mechanical and Production Engineering, Nanyang Technological University, Singapore
Invited Paper presentation at the International conference
24 10-13 July 2005 International Conference on Advanced Materials Development and Performance held in the School of Engineering, The University of Auckland, New Zealand
Invited Paper presentation at the International Conference
25 01-06 August 2005
International Conference on Composites / Nano Engineering held in Tenerife, Canary Islands, Spain
Invited paper presentation
26 14-19 May 2006 9th International Fatigue Congress, Atlanta, USA
Invited Paper Presentation
27 4-8 July 2006 International Conference on Processing & Manufacturing of Advanced Materials, THERMAC’ 2006, Vancouver, Canada
Invited Paper Presentation
20. MEMBERSHIP IN ACADEMIC/PROFESSIONAL/RESEARCH
ORGANIZATIONS / BODIES
BOARD / ORGANIZATION/ SOCIETY
Advisor, Union Publ ic Service Commission (UPSC), New Delhi . Indian Ceramic Society Indian Society for Technology Educat ion (Membership No. LM22103) Board of Studies in Polymer Science, Mysore Univers i ty and Bangalore Universi ty Board of Examiner, Mangalore Universi ty, Mangalore Nominated by the Government of Karnataka as Member of Execut ive Counci l , Visveswaraya Technological Univers i ty Belgaum, Karnataka (2004-2007) Member of the IEEE Robot ics and Automat ion Society, 2005 to date. Associate Li fe Member of Computer Society of India, 2005 to date. L i fe Member of Acharya Patashal , Bangalore
21. NATIONAL RESEARCH FELLOWSHIPS
Sl. No. Fellowship Awarded by Duration
1
Career Award UGC 1993-1996
2 National Fellowship
UGC 1997-2000
3 Indian National Science Academy Fellowship INSA 2001
22. HONORS / AWARDS RECEIVED
Sl. No. Honour Conferred by Year 01 Karnataka Rajyothsava Award
(Research) Govt. of Karnataka 1995
02 Ambedkar Award State Government of Karnataka 2005
03 Babu Jahajeevan Award State Government of Karnataka 2007 04 Karnataka Kalashri Award Karnataka Sangeetha & Nruthya Academy,
Govt. of Karnataka 1996
05 Samaja Seva Bhushan Award Subharm Trust (A trust established by the Govt. of Karnataka for Child Development)
1997
06 Kempegowda Award Bangalore Mahanagara Palike 2003
07 Karnataka Sahitya Academy Award (best book of the year “Eraka Shastra Tantrajanna)
Karnataka Sahitya Academy, Govt. of Karnataka.
1998
08 Artist of the Year Gaayana Samaja, Bangalore.
1999
09 Ganakala Shree Award Karnataka Ganakala Parishat
2001
10 ARCI Best Paper Award NSRS-4, IIT Madras, Chennai 2002 11 Vocational Excellence Award Rotary Bangalore West and Rotary
Bangalore Udyog, 2000
12 J.N.Tata Endowment for Higher Education
Tata Endowment 1982
13 J.N.Tata Gift Scholarship
Tata Endowment 1986
14 Sponsored M.E.Project Karnataka State Council for Science and Technology
1986
15 Machwell Publication Cash Award
Govt. of Karnataka 1988-89
16 Consistent Financial Aid
Repute Tractor and General Engg.
17 The Rajasthan Mercantile Company Award
The Rajasthan Mercantile Company 1988-1989
18 Additional Grant The Rajasthan Mercantile Company 1989 19 Mother Teresa AWARD Centre for Socio-Economic Development,
Bangalore. 2005
20 Karnataka Rajyothsava Award (R V Centre for Social Service and Skills Promotion as Founder Director )
Govt. of Karnataka 2005
21 Karnataka Janapada Yaksshagana awards- 2000
Conferred on Kriyakalpa-Techno-cultural Museum, by the Government of Karnataka
2000
22 Bharat iya Vidya Bhavan Nat ional Award for Best Engineer ing Col lege Pr incipal
ISTE, New Delhi 2008-09
23 Dist inguished Alumni Award
B M S College of Engineering 2009
23. BOOKS AUTHORED
Sl. No Title Publishers Year
1 Composites Materials Narosa Publication House, New Delhi, First Edition Revised Edition under processing
1999
2 Utpadana Tantragnana (Production Technology)
Divyachandara Publications 1995
3 Eraka Tantrajnana (Foundry Technology)
Divyachandara Publications 1996
24. WORKSHOPS/SEMINARS/CONFERENCESORGANIZED/ CONDUCTED AT R V COLLEGE OF ENGINEERING, BANGALORE
WORKSHOP / SEMINAR / CONFERENCE
DURATION
Indo-German Workshop on Advances in Automotive systems and Production Engineering
27-28 Feb & 1 Mar 2003
Advances in Heat and Mass Transfer 16-17 Dec 1999 Empowerment through Computer Education for Rural SC Youth 27-28 Jan. 2000 Enterprise Resource Panning 25, Jan,-5 Feb 2000, Condition based maintenance of the Machinery 24 Apr 2001 National Seminar on Advances in Composites and Metal Matrix Technology-its Applications (Jointly Organized by Aeronautical Society of India and R V College of Engineering
21 Dec 2001
“Synergy 2001” 14-15 Dec 2001 VORTEX-2004 21,22, May 2004 Quantitative Model in Supply chain management Faculty Development Programme (AICTE Sponsored)
17-29 May 2004
One Day National Seminar on MEMS-2004 (LRDE, GTRE, CABS) 12 June 2004 One Day National Seminar on NANO Technologies (ISRO) 26 June 2004 Recent Trends in Dries and Power system Projection 27-28th July 2006 World class Management Practices for Managing Institution of Higher learning (ISTE)
August 2004
Inspiration Talk on Entrepreneurship 7th September 2006
International Conference on Computer, Communication, Control & Instrumentation 3CI-2007
21st to 23rd Dec 2007
IEEE Sponsored International Conference 21st to 23rd Dec 2007 Carrier Opportunities in Chemical Engineering 19-11-2007 Alternative Building Technology for Cost Effective Housing 19-12-2007 One day seminar on Software Quality Testing 27th May 2006 One day workshop on Inspiration Talk on Entrepreneurship 7th Sept 2006 Two days National convention 20th CSI Karnataka Student Convection 20th Sept 2006 Two week faculty development program on Business Process Modeling 17th – 29th July 2006 Two days inter Collegiate Techno Management Fest “SYNERGY 2006” 6-7th Oct 2006 One day seminar on Role of Attitude and Mindset change for National Development
12 August 2006
A Series of seminars / workshops on Bio Informatics and Applications 25th April 2006 Faculty workshop on Software Testing and Practices using Rational Rose
26-28th June 2006
One day workshop on “Inspiration Talk on Entreprenueurship 7th Sept 2006 Two week faculty development programme on “Business Process Modelling
17-29th July 2006
25. CENTRES ESTABLISHED IN R V COLLEGE OF ENGINEERING, BANGALORE
( i ) Centre for Manufactur ing Research and Technology Ut i l izat ion
(CMRTU) ( i i ) R V Center for Social Service & Ski l ls Promot ion (SKIP) ( i i i ) R V Centre for Sustainable Technology ( iv) Kriyakalpa – Technocul ture museum (v) Centre for Gandhian Pr incip les & Value based Educat ion (v i) Centre for Hydrogen Technologies (v i i ) 1Karnataka BN Signal Uni t -NCC (v i i i ) R V Centre for Cognit ive Technologies ( ix) Women Empowerment to Science and Technology
26. BRIEF PROFILES OF THE CENTRES ESTABLISHED ( i ) CENTRE FOR MANUFACTURING RESEARCH AND TECHNOLOGY UTILIZATION (CMRTU) Objectives of CMRTU
• To establish a full-fledged Research and Development Cell in the area of advanced Engineering materials
• To offer post-graduate and Doctoral programmes through the centre • To develop advanced Engineering Materials for special applications • To promote Industry-Institute interaction through research projects, Consultancy and
extension services • To promote Technical collaboration with International Universities
26,27
CMRTU – A Research Center for MS / MSc.(Engg.) & Ph.D. Studies under different Universities
• Visveswaraiah Technological University (VTU) • Anna University • Bangalore University • Mangalore University • Mysore University
Milestones of CMRTU
• 60 research projects from the various national funding research organizations successfully undertaken
• About Rs 8 Crore Worth of Research Projects Executed • 8 UGC career awardees undertaken research at the Centre • About Rs 3 Crore invested on establishment of the Centre • 19 Research scholars completed Ph.D., 35 Research scholars completed M.S. /M.Sc.
(Engg.) programmes15 Research Scholars undertaking Ph.D. studies under different Universities Published 75 research papers in international referred journals
• Presented 200 Research articles in National / International Conferences • Developed around 25 advanced engineering materials
Research Infrastructure of CMRTU
• Advanced composites & heat treatment furnaces • Well-equipped manufacturing cell • Tribology laboratory • Advanced Metallography laboratory • Advanced (Computer interfaced) Material Testing laboratory • Advanced polymer laboratory • Environmental laboratory • Industry-Institute-Interaction cell • Industry-Institute-Partnership cell
Memorandum of Understanding (MOU) with Foreign Universities for collaborative research and studies
• University of Wisconsin, USA • University of West Virginia, USA • Lamar University, USA • University of Aachen, Germany
( i i ) R V CENTRE FOR CENTRE FOR SOCIAL SERVICE & SKILLS PROMOTION (SKIP)
• Karnataka Rajyothsava Award 2005 has been awarded to this
Centre Objectives of SKIP
•• DDeessiiggnniinngg ttaaiilloorr mmaaddee ttrraaiinniinngg mmoodduulleess oonn vvaarriioouuss eennggiinneeeerriinngg ttrraaddeess ffoorr tthhee uunnddeerrpprriivviilleeggeedd sscchhooooll ddrrooppoouuttss
•• IImmppaarrttiinngg ttrraaiinniinngg oonn ssoopphhiissttiiccaatteedd mmaacchhiinnee ttoooollss aanndd eeqquuiippmmeenntt aanndd tthheeoorreettiiccaall
aassppeeccttss ooff bbaassiicc eennggiinneeeerriinngg iinn aa vveerryy ccoonndduucciivvee eennvviirroonnmmeenntt Training Programmes offered
•• Machining & preventive maintenance, fitting, welding and plumbing, Structural fabrication and foundry, Craftsman training on miller, shaper, planer, Building construction, carpentry and plumbing, Electrical home appliances, BBaassiicc ccoommppuutteerr EEdduuccaattiioonn,, DDeesskkttoopp PPuubblliisshhiinngg,, TTVV aanndd RRaaddiioo EEnnggiinneeeerriinngg
• More than 3000 underprivileged school dropout and destitute SC/ST youth have been
successfully trained through the Centre, who have gained employment. (iii) R.V. CENTRE FOR SUSTAINABLE TECHNOLOGY Objectives of the Centre
•• CChhaarraacctteerriizziinngg tthhee sseewwaaggee aanndd ttoo eelliimmiinnaattee hheeaavvyy mmeettaallss pprreesseenntt iinn tthhee sseewwaaggee uussiinngg cchheellaattiioonn pprroocceessss
•• CCoonndduuccttiinngg mmiiccrroobbiioollooggiiccaall eexxaammiinnaattiioonn ooff sseewwaaggee •• EEffffeeccttiivveellyy pprroodduucciinngg vveerrmmiiccoommppoosstt uussiinngg tthhee sslluuddggee aanndd mmeettrrooppoolliiss wwaassttee •• CCrreeaattiinngg aawwaarreenneessss aammoonnggsstt tthhee rruurraall ffoollkk aanndd ppooppuullaarriizzee tthhee vveerrmmiiccoommppoosstt
( iv) KRIYAKALPA – A TECHNOCULTURE MUSEUM Objectives of Kriyakalpa
• Creat ing awareness on the technological concepts in ancient and t radi t ional objects.
• Developing the museum as a research centre in Archeology and fo lk lore to take advantage of the vast databank under one roof
Award conferred
• Karnataka Janapada Yakshagana Award- 2000 conferred on Kriyakalpa by the Government of Karnataka
(v) CENTRE FOR GANDHIAN PRINCIPLES & VALUE BASED EDUCATION Objective of the Centre
• Impart ing value based educat ion to the students of SKIP and engineer ing through socia l awareness and personal i ty development programmes.
(vi)CENTRE FOR HYDROGEN TECHNOLOGIES Objective of the Centre
• Developing green technologies for hazardous waste incinerators, aqua gas cut t ing, metal cut t ing, and modi f ied engines for ut i l iz ing the Hydrogen fuel for e l iminat ion of a ir pol lut ion
COUNSELING FOR THE YOUTH
• Educat ional Columnist in State & Nat ional Dai l ies and Weekl ies • Career Counsel ing through Radio and Televis ion – Doordarshan,
Udaya TV, E-TV, etc.
27. CONTRIBUTION TO HIGHER EDUCATION AS PRINCIPAL 28.
1. Dr. S.A.Patil, Director, IARI, New Delhi presented seminar on “Present scenario of Agricultural Biotechnology” on 6th June 2007 at Department of Biotechnology, R.V.C.E.
2. Prof. Anupam Srivastav, Director, College of Engineering & Technology (Uttar Pradesh Technical University, Lucknow), Muradabad gave a seminar on “Fracture and fatigue of biological materials” on 22nd August 2007 at Department of Biotechnology, R.V.C.E.
3. Dr.Kanitkar, Senior Vice president (development), ABB Ltd, has conducted two one-day interactive workshops for M.Tech students on 09-06-2007 and 16-06-2007. The workshops were aimed at finding out possible project areas suitable for the final year M.Tech students.
4. Sri Sreevatsa, Manager (customer-support and training), ABB Ltd, has delivered a technical talk on “Research initiatives” for M.Tech students on 2-06-2007.The talk was aimed at exposing M.Tech students to various power electronics based research areas.
5. A Technical talk on “Scenario of power generation due to usage of Renewable Energy sources” by Dr.Naganna Goud, Technical officer, KRDEL.was arranged on 28-08-2007. The talk highlighted the various renewable energy sources practically implemented in Karnataka so far and possible future scope.
6. One week short term training programme on “Human Resource Development” during 25-29, June 2007, conducted by Indian Heritage Academy and Dept of Industrial Engineering and Management, R V College of Engineering, Bangalore sponsored by All India Council for Technical Education (AICTE), New Delhi.
7. Dr. Rakesh Agarwal, Nonika Bajaj and Sharath Shasheendran from Accenture, Bangalore had come to give a seminar on Software testing and Practices in June 2007.
29
8. Dr. Chidananda Gowda, gave a seminar on the topic Neural Networks under the Research initiative program for the PG students on July 15, 2007.
9. One week short term training programme on “Human Resource Development” during 25-29, June 2007, conducted by Indian Heritage Academy and Dept of Industrial Engineering and Management, R V College of Engineering , Bangalore sponsored by All India Council for Technical Education (AICTE), New Delhi.
10. Under the continuation education program conducted by RVCE the 20 members staff of LRDE where given a course on “Mechanical Engineering Skills”, from 11th to 16th of June 2007.
11. Skill development program organized by the Department of Telecommunication Engineering & PG Studies for LRDE students on 23rd to 27th July, 2007.
12. Skill development program organized by the Department of Telecommunication Engineering & PG Studies for LRDE students on 30th July to 3rd August, 2007.
13. One day seminar on “E-learning” (Bioinformatics) at Dept. of Biotechnology, R.V.C.E on 21st August 2006.
14. One day seminar on “IPR” at Dept. of Biotechnology, R.V.C.E on 19th September 2006.
15. One day workshop on “ Inspirational Talk on Entrepreneurship” 7th September 2006
16. The department has conducted a two day national workshop on “Recent Trends In Drives And Power System Protection” on 27th and 28th July 2006. Eminent speakers from CEDT, IISc, PRDC, NITK and Schneider Electric have participated. The workshop was sponsored by Schneider Electric and PRDC, Bangalore.
17. Two week faculty development programme on “Business Process Modelling” organized by Dept. of IEM, R.V. College of Engineering, Bangalore sponsored by AICTE during 17th – 29th July 2006.
18. Seminar on “Higher Education” by Dheeraj Sanghi CSE Dept, IIT Kanpur on 14th Sept 2006
19. MCA Department is conducting 3 months software training program for socially and economically disadvantaged under the banner of WEST / SKIP (‘Center for Women’s Empowerment and Skills Training / Center for Social service and skills promotion) from Sept. – Nov. 2006. Rtn Srikanth Chatrapathy, Governor R.I 3190 inaugurated the program.
20. Mrs. K.S. Jasmine, Lecturer , delivered a lecture on ‘Software Testing Principle’ on 25th August 2006 at BMSCE as a part of two weeks ISTE sponsored workshop on ‘Software testing’
21. The department organized the following training programmes for different groups of engineers and technicians from DRDO.
22. A short term training program on “Overview of Electronics” for Mechanical engineers of DRDO from 31st July 2006 to 11th August 2006
23. An on going CEP Programme on “Signals and systems with applications” for DRDO Employees from July-2006 to November -2006
24. National Symposium on Biodiversity and Bioactive Compounds on November 6th 2006.
25. National Conference on “Nano-biotechnology” on November 13th 2006.
26. Centre for Nano-Biotechnology has Organized one day symposium on “Role of Biotechnology in Mutation Virus” on 15-11-2006 at RVCE
27. Department of Chemical Engineering organized a two day national seminar on “Nanotechnology and Its Applications” on 3-4th Nov, 2006.
28. The 20th CSI Karnataka student convention on the theme ““IT Convergence – Innovations & Products” was conducted by R.V.College of Engineering, Bangalore on 13th , 14th Oct 2006, provided good opportunity to the Technical Under Graduate students of Karnataka to showcase their talents in this convention. The special mention is that RVCE hosted the convention for the THIRD time.
29. International Conference on Computer Communication & Control- 3C-2006 – November 23rd, 24th & 25th 2006
30. A one day Workshop on “APPLICATIONS IN VLSI DESIGN AND EMBEDDED SYSTEMS” was organized on 29th Sept.2006. Lectures by experts from CEDT, Texas Instruments, AMD, Bangalore were arranged. Forty-one delegates participated in the workshop. The workshop was sponsored by AMD, Bangalore.
31. The department of “Instrumentation Technology” has started the STST Training programme on “Design & Fabrication of Printed Circuit Boards”. This training programme has been sponsored by Department of Science and Technology, New Delhi, and Sanctioned an amount of Rs.1,00,000, for conducting this training Course. This course is designed for ITI, Diploma and SSLC passed study discontinued candidates for their better job opportunities. The Course was started on 31st January 2007. The duration of the course is 8 weeks
32. One day National Seminar on “Nano Materials” on 9th October 2006.
33. MCA Department is conducting 2 batch of 3 months software training program for socially and economically disadvantaged under the banner of WEST / SKIP (‘Center for Women’s Empowerment and Skills Training / Center for Social service and skills promotion) from Jan. – April. 2007, being funded by Rotary, Peenya.
34. Two day ‘IBM Academic Initiative Programme ‘for faculty was conducted by IBM
35. One day workshop on ‘MATLAB’ was conducted for faculty on 5th October 2006 by Mrs. Andhe Pallavi, H.O.D , department of IT, RNSIT
36. One day faculty workshop on ‘Advanced JAVA’ was conduced by Mr. Amaresh, Polaris Pvt LTD, Chennai on 14th October 2006
37. National Conference on “Recent Trends in Chemical Engineering and Boitechnlogy” 26/05/2005 to 27/05/2005
38. National Conference on “ Recent Trends in Boimedical instrumentation” on 05/06/2005
39. Workshop on “Cultivation and commercialization of Biodiesel Plants” 30/08/2000 to 31/08/2005
40. Helix-05 21/10/2005 to 22/10/2005
41. Two days National level technical students technical symposium React 2005 at RVCE, Bangalore, 24th & 25th May 2005
42. Two days National level conference on Recent trends in Chemical engineering and Biotechnology Chembiot-2005 at RVCE, Bangalore, 27th & 28th May 2005
43. One day seminar on vermicomposting An avenue for entrepreneurship for farmers at RVCE, Bangalore, 31st July 2005
44. Nano science and Engineering organized by M.S. Ramaiah Institute of Advanced Studies 28th September to 8th October -2005
45. Two Day National Conference on SOC for Broadband Access (SOCBAND – 2005) 21/10/2005 to 22/10/2005
46. Two Day State Level Seminar on “Constitution of India and Professional Ethics” 11 – 12 August 2005
47. Training on “Industrial Engineering & its applications ” for students of Rajiv Gandhi Polytechnic, ITANAGAR, Arunachala Pradesh, 15th June – 6th July, 2005
48. National Conference on Recent Trends in Biomedical Instrumentation. Conducted on 3rd June 2005
49. National workshop on Industrial Automation Conducted on 18th to 23rd July 2005
50. Course for BEL employs Electronics for Mechanical Engineers: Phase I (Measurements), BEL Dept Fest Celebration of World Telecom Day 01-08-05 to 05-08-05
51. Seminars- One Day Program on Radar Signal Processing 08-10-05
52. Industrial Engineering & Management- Two day state level seminar on Constitution of India & Professional Ethics on 11-12 Aug 2005
53. Electronics and Communication- Two day National Conference on SOC for broadband Access (SOCBAND-2005), 21-22 Oct 2005
54. Chemical Engineering- One day seminar on vermicomposting “An avenue for entrepreneurship for farmers, 31 July 2005
55. Biotechnology- National conference on Recent trends in Biomedical instrumentation, 5-6-05.Workshop on cultivation & commercialization of biodiesel plants, 30-31 Aug 2005.Helix-05, 21-22 Oct 2005
56. MCA department- 1.National conference on Computational mathematics in engineering applications, 21-22 July 2005
57. National conference on advanced multimedia processing and applications, 28-29 July 2005
58. Electrical- 1. Course for LRDE employees- Electronics for mechanical engineers: phase I (Measurements), BEL, 1-8-05 to 5-8-05
59. One day Seminar on Radar Signal Processing, 8-10-05
60. Civil Engineering- 1. One day National Workshop on Imperative of rainwater harvesting and reuse in urban and rural areas on 21st Oct 2005
61. Celebration of Sir.M.Visveswaraiah Birthday on 15th September 2005.
62. Instrumentation Technology -1.National conference on recent trends in biomedical instrumentation on 3rd june 2005
63. National workshop on industrial automation on 18-23 July 2005
64. Computer Science & Engineering- Three day workshop on C# and .NET programming, 4-6 Aug 2005
65. Two days National level technical students technical symposium React 2006 at RVCE,Bangalore, 19-20 May,2006
66. Modeling Viral Dynamics and the Impact of Drug Therapy- Dr. Narendra Dixit from IISc,Bangalore
67. Introduction to Polymer Physics- Dr. Sunil Kunamaneni from GE Plastics, Bangalore
68. Management courses for graduate engineers- Ms. Ishita Bandhopadhaya, Student at XLRI, Jamshadpur
69. Organized National Seminar on “Restoration Rehabilitation and Reliability of Structures sponsored by Benefactors at R.V.C.E Bangalore
70. International Conference on Computer , Communication and Controls sponsored by R.VC.E at R.V.C.E Bangalore
71. National Conference on SOC for Broad Band Access sponsored by DRDO and R.V.C.E at R.V.C.E
72. Seminar on Embedded Systems
73. Seminar on Digital Design using Altera QuartusII Design Environment Mr. Razaque
74. Seminar on VLSI Testing & Verification by Mr. C.P. Ravikumar Texas Instruments sponsored by R.VC.E at R.V.C.E Bangalore
75. Interference problems and their elimination in OFDMA techniques at IISc at R.V.C.E
76. Wire line Broadband- ADSL, VDSL sponsored by R.VC.E at R.V.C.E Bangalore
77. History of IC fabrication technology and the impact of SOC on VLSI Technology sponsored by GDA Technologies at R.V.C.E Bangalore
78. SOC for Wireless Broadband Consumer Applications sponsored by WIPRO Technologies at R.V.C.E Bangalore
79. Embedded Systems sponsored by Mindtree Consultancy at R.V.C.E Bangalore
80. Students from Rajiv Gandhi Polytechnic, Arunachal Pradesh
81. Microwave Communication Work shop
82. VX works for 1st yr students
83. Storage Area Networks
84. SCOOL – Simple in C Object Oriented Language
85. Software Testing and Practice
86. Current Trends in Bio-Informatics
87. Network Simulation using NETSIM
88. Seven days Off-Campus Training programme for the students of Rajiv Gandhi Polytechnic, Itanagar, Arunachal Pradesh 19th December 2005 - 6th January 2006 Polytechnic Students of Arunachal Pradesh
89. Four Days Workshop on Personality Development Mr. Ananda Rao, Director-ZEN School, Bangalore 22nd - 25th February 2006
90. One-Day Workshop on Network Simulation using NETSIM Software Mr. Anil Kumar of M/s. TETCOS 16th March 2006
91. One Day Program on Radar Signal Processing
92. Workshop on VLSI & Embedded system design sponsored by ALTERA
93. Digital Electronics & Fundamentals of Microprocessors sponsored by LRDE
94. Electronics for Mechanical Engineers : Phase I (Measurements) sponsored by BEL
95. The 20th CSI Karnataka student convention on the theme ““IT Convergence – Innovations & Products” was conducted by R.V.College of Engineering, Bangalore on 13th , 14th Oct 2006, provided good opportunity to the Technical Under Graduate students of Karnataka to showcase their talents in this convention. The special mention is that RVCE hosted the convention for the THIRD time.
96. International Conference on Computer Communication & Control-3C-2006 – November 23rd, 24th & 25th 2006.
97. A one day Workshop on “APPLICATIONS IN VLSI DESIGN AND EMBEDDED SYSTEMS” was organized on 29th Sept.2006. Lectures by experts from CEDT, Texas Instruments, AMD, Bangalore were arranged. Forty-one delegates participated in the workshop. The workshop was sponsored by AMD, Bangalore.
98. A Technical talk on Applications of DSP processor by Dr. Rama, IISc, Bangalore was arranged on 9-9-2006.
99. A Technical talk on Robot Puppet by Dr. Dinesh, CEDT, Bangalore was arranged on 11-11-2006
100. A Technical talk on Career development & choice by Sri Suresh S was arranged on 20-11-2006
101. The department of “Instrumentation Technology” has started the STST Training programme on “Design & Fabrication of Printed Circuit Boards”. This training programme has been sponsored by Department of Science and Technology, New Delhi, and Sanctioned an amount of Rs.1,00,000, for conducting this training Course. This course is designed for ITI, Diploma and SSLC passed study discontinued candidates for their better job opportunities. The Course was started on 31st January 2007. The duration of the course is 8 weeks
102. MCA Department is conducting 2 batch of 3 months software training program for socially and economically disadvantaged under the banner of WEST / SKIP (‘Center for Women’s Empowerment and Skills Training / Center for Social service and skills promotion) from Jan. – April. 2007, being funded by Rotary, Peenya.
103. Two day ‘IBM Academic Initiative Programme ‘for faculty was conducted by IBM
104. One day workshop on ‘MATLAB’ was conducted for faculty on 5th October 2006 by Mrs. Andhe Pallavi, H.O.D , department of IT, RNSIT
105. One day faculty workshop on ‘Advanced JAVA’ was conduced by Mr. Amaresh, Polaris Pvt LTD, Chennai on 14th October 2006
106. Two day faculty workshop on ‘IBM Academic Initiative Programme ‘ was conducted on 24th and 25th November 2006.
107. Seminar on “ERP Perspective” was conducted on 5th October 2006 by G B Prakash Accenture
108. Seminar on “Data warehousing and EDI” was conducted on 6th October 2006 by Mr. Ravishankar, Project manager, GE, Bangalore
109. One day workshop on ‘Software Testing’ was conducted on 28th October 2006 by Mr. Vinod Sasidharan and Mr. Naveen , Accenture, Bangalore
110. Two day workshop on “Career Planning” was conducted on 29th and 30th of October 2006. Mrs. Vani, CISI Technologies, Mr. Sandeep of IBM, Mr Niranjan Sarja of Cognizant Techologies and Mr Renjeev of Accenture delivered the lectures.
111. Seminar on “JSP to DB2 with tomcat and Eclipse” was delivered by Mr. Yashwanth Patodia, IBM, Bangalore on 30th October 2006.
112. Workshop on signals and systems with application for DRDO Employees
113. CEP programme on digital electronics and Microprocessor for DRDO Employees – December 2006.
114. CEP Programme on Mechatronics for mechanical engineers December 2006
29. CONTRIBUTIONS TO THE FIELD OF SOCIAL SERVICE
SKILL DEVELOPMENT PROGRAMMES FOR THE UNDERPRIVILEGED FOR POVERTY ALLEVIATION
• Brought out a compendium on the base line data for the design of the poverty alleviation programmes through:
• Researching on various facets of the national youth perspective plan at the national level
• Conducting feasibility studies for involvement of youth in the programme, to derive the baseline data to evolve programmes for youth
• Identifying potential beneficiaries such as rural & urban school dropouts, urchins and slum children
• Conducting field investigations in slum areas for appraising the development potential of the identified beneficiaries for their possible involvement in the programmes
• Identifying need based and job-oriented skills to evolve a practical plan
CONCEIVED THE CENTRE FOR SOCIAL SERVICE AND SKILLS PROMOTION (SKIP)
• Skill development programmes of R.V. Centre for Social Service and Skill Promotion • Poverty Alleviation through Skill Development Programmes for the underprivileged • (Sponsored by the Union Ministry for HRD and the National SC & ST Finance &
Development Corporation) • Govt. funded projects under the aegis of Department of Social Welfare, Rural
Development, HRD • Developed the infrastructure to implement the programmes for the underprivileged,
which include land and buildings for classrooms, lecture halls, faculty rooms, workshops, laboratories, drawing halls, machine shops, etc. which provided an ideal ambiance for all round development of the youth.
CORE CONCENTRATION IN THE PROGRAMMES FOR THE WEAKER SECTIONS
• Machining and preventive maintenance, fitting, welding and plumbing, structural fabrication and foundry trade, craftsman training on miller, shaper, slotter, planer, building construction, carpentry and plumbing, electrical home appliances, basic computer education, desk top publishing, screen printing, CNC machining, Radio and TV Engineering, Vermicomposting, etc
TECHNICAL TRAINING FOR SPEECH AND HEARING IMPAIRED
• Identified a number of Speech and Hearing impaired youth and successfully trained them on special technology modules such as DTP, Computer training, Screen Printing, Book binding, CNC turning, Library maintenance etc.
EXTENSION SERVICES
• Undertaken extension services through training demonstrations, meetings, group discussions, publishing and disseminating of literature,
• Organized an expanding network of training programmes in nearby villages for bringing education to the grass roots
• Lead the team for socioeconomic studies of nearby villages for identification of key areas of trades with rural orientation
• Formulated projects for implementing schemes and services in a bid to benefit rural school dropouts, which have received overwhelming response
ADVOCACY
• Professed education of the highest order and moulded the school dropouts into responsible citizens
• Developed literature for training modules and organized field demonstration to show the efficacy of the SKIP programmes
EDUCATIONAL RESEARCH
• SKIP programmes as an input to Research on Socio-economic aspects of the underprivileged
• Conducted Integrated resources survey for development planning • Documented Demographic information about the youth • Introduced the systems to suit immediate industrial needs • Shaped the programmes mass based and broad based
• Developed presentation packages • Provided educational assistance to the beneficiaries and in this form of education, the
needs of the students were considered without disturbing their economic activities • Educated the beneficiaries about various welfare schemes operating for their benefit. • Expanded the scheme to include about a thousand youth each year and made use of
mass media like TV, print media • Introduced students aptitude for a particular trade
MILESTONES OF THE POVERTY ALLEVIATION PROGRAMMES
• Transformation of over 3000 school dropout underprivileged youth through training on various educational modules
• Successful completion of over thirty educational programmes for the deprived • Tie-ups with national funding organizations • Forays into new areas like computing for women • Multifaceted educational programmes transcending the paradigm of conventional
education with emphasis for thrust areas • Opening up of new vistas for the school dropouts
R.V. CENTER FOR SUSTAINABLE TECHNOLOGY
• Successfully imparted training in Sustainable Technologies to the underprivileged enabling them earn their livelihood
• Transformed the weaker section school drop out youth into effective entrepreneurs
30. BENEFICIARIES OF SKILL DEVELOPMENT PROGRAMMES
BRINGING FORTH EXCELLENCE IN THE DISADVANTAGED
The kinetics of the high mission of producing human resource of highest caliber from the potential disadvantaged youth involves recognizing the innate talent and research aptitude in the youth and providing them an opportunity to carve a niche in their career. The Centre for Manufacturing Research and Technology Utilization (CMRTU) is a medium through which a number of aspirants have been elevated to the Zenith in their careers.
AN ARDUOUS TREK FROM THORN TO THRONE
Paulvizhian, a Scheduled Caste, (with an M.Tech. in Machine Design), hails from a humble family background, whose father was a mining coolie in BGML, with meager earnings for subsistence. Paul is one amongst seven children of his parents. He had to trek long distances on foot for his schooling. He had a very arduous childhood experience, which was full of thorns, which he managed to cruise along and came to study in the reputed University Visvesvaraya College of Engineering, Bangalore. This was a crucial period in his career when joined CMRTU.
Recognizing the young talent, CMRTU counseled and enthused him to complete his engineering education up to Master’s and also provided him the necessary financial assistance. Later he was introduced to CMRTU, where he has registered for Ph.D. Programme. This brought a miraculous change in his career.
He has traveled widely to present his research works in various international conferences. His papers were well appreciated at the national conference on Recent advances in experimental mechanics at IIT Kanpur.
He is now Reader & Chairman Board of Examiners, Postgraduate Studies, Bangalore University, which is a prestigious position.
SAGA OF A SULLEN BOY WHO FOUGHT AGAINST VICISSITUDES
Shivarudraiah, a Master’s in Machine Design, also a Scheduled Caste, aged 35 years, grew amidst abject poverty in the village of Urdigere, Tumkur Taluk, Tumkur District, devoid of even basic minimum amenities. It was a small hamlet, from where he had to trek long distances for attending schools. Overcoming all the Vicissitudes, he completed his schooling and Pre University Education from Tumkur.
The sudden transition from Village life to the Metropolis was a hot ghee in the gullet of young shivarudraiah. Fortunately for him, there was a solace in CMRTU, which provided him proper counseling and acclimatized him to the changed social circumstances, consequent upon which he obtained successfully Bachelor’s and Master’s degree in Mechanical Engineering.
Shivarudraiah is now a dedicated researcher with a number of research publications to his credit.
A PHOENIX WHO BLOSSOMED FROM ASHES
Krishna, an orphan at infancy, hailing from a hamlet near Ramanagaram, had an awful and checkered childhood and had to bear the brunt of misfortune. He had to walk long distances for schooling with least care and encouragement. However, the poor boy with his spiritual inclination, used to attend Sathsangh of Kaivara Thathaiah, the seer of Kalachakra fame, which prevented him from going astray.
He had neither caretakers at home nor anybody to instruct him in the right path. He did his BE from PES College of Engineering Madya after passing the Pre-University course from the Government Junior College Ramanagaram. He was one of the few Alumni to get entry into professional course.
After acquiring BE in Automobile Engineering, he had a stint of career at a local textile factory in Ramanagaram and Azad Coach Builders. It was when Krishna was working on a temporary
basis in M/s Azad. He was introduced to CMRTU and was provided moral support which was required to unleash the native genius.
Krishna stood up to the great expectations of his mentor and thereafter he never looked back. Krishna came out with a number of innovative research publications at national and international level. He completed his Master’s and is now undertaking his doctoral studies.
YOUNGSTER ON CROSS ROADS SEES THE LIGHT
Thipperudrappa, (an M.Tech), a married unemployed Scheduled Caste youth from a remote village of Chitradurga who had gone astray was identified as a potential researcher with analytical abilities by CMRTU, and given the position of training in-charge of SC/ST skill promotion programmes of the Centre for Social Service and Skills promotion established by SCS. This helped him to sustain himself and his family, while simultaneously pursuing his Doctoral Programme.
The background in social service empowered him to get employment in Shramik Vidyapeeta, a Government Organisation where he is presently the Programme officer. Thus, the youngster on cross roads, saw the light.
MOULDING A CUTTING EDGE SCIENTIST
Nagarajan, a scheduled caste from the neighbouring state of Tamilnadu, had Master’s in Engineering. He had always aspired for higher degrees in vain. CMRTU was then in the limelight and Mr. Nagarajan was enchanted from the success stories of the less fortunate who carved a niche in the society.
As a low profiled scientist at LRDE, he elevated himself to the higher echelons and moulded into a cutting edge scientist after acquiring his Ph.D. degree through the Centre.
A GIANT TECHNOCRAT RISEN FROM HUMILIATION
Munivenkatarayappa born in a Scheduled caste family in North Karnataka with not a morsel to eat had to fight the gruesome days of his childhood in the scorching Sun in black cotton soils. He obtained his BE degree in Mechanical Engineering from Poojya Doddappa Appa College of Engineering, Gulbarga.
He was provided a free seat in the Hostel with additional remuneration for subsistence. He dreamt of obtaining his MS in Technological Operations from BITS Pilani. He acquired computing skills and research expertise, which provided him the springboard to elevate himself to the position of Divisional Manager in a Multinational company. Munivenkatarayappa is now a proud technocrat who rose from humiliation.
AT THE THRESHOLD OF BRIGHT CAREER ONLY DUE TO PROPPING
Jayalakshmi, a fatherless but bright girl from Shimoga had a very arduous childhood, with meager earnings by her mother working as a cook. Never perturbed by poverty, she continued her studies to score very high marks in Pre-University course enough to fetch a seat in Engineering at the Jawaharlal Nehru College of Engineering, Shimoga. Accepting to join Engineering she was looking for financial support. Upon hearing about her from one of her colleagues, she was supported financially. She has now successfully completed her Bachelor’s in Engineering and is happy with a job in multinationals.
IMPOVERISHED “RANI” NOW AN IPS ASPIRANT
Rani, the daughter of a small time jobber as a peon with unclean habits and an alcoholic addict was vested with the domestic responsibility from culinary duty to milching cow. He was forced to look after the family at a tender age consequent upon which, she was in the verge of discontinuing her studies after Matriculation. At this stage of her life, there was a sparkle of light in her life when she came to SKIP incidentally which offered her counseling and financial assistance to continue her studies. This was a turnaround in her career, which paved the way for pursuing predegree education in her favourite arts stream with HEPS, which she cleared with flying colours. She was encouraged to take up Bachelor of Arts, which she completed successfully with flying colours scoring 76 % in aggregate. This is a bewildering achievement from a slum lass who had her education throughout in Government Institutions. There were options for her to pursue Master’s degree. She has chosen to get a rigorous training for IPS. She strongly believes in serving people and providing security for the disadvantaged.
DEJECTION TO DISTINCTION
Venkatesh, brother of Rani and son of an uncouth illiterate and not as merited as Rani was an SSLC Dropout. SKIP plunged into action in averting him from becoming a loafer. The Centre helped him financially to support his fees and thus continue studies. Venkatesh, rightly made use of the opportunity and completed PUC with high marks. He thus became the second beneficiary of the same family. Thus, once dejected Venkatesh has earned distinction in studies.
PROPPING THE DESTITUTE
Kamakshi, a destitute with a brother and a sister, lost her father at an early age. The mother of the three children eloped to leave them with none to care. The trio discontinued schooling and were looking for someone to lend a helping hand, even for their sustenance. SKIP identified these children who were put back to schools for studies and arranged for their stay at Deena Seva Ashram, in the City. Kamakshi, completed her Degree course, Harisha, her
brother studying in II Year PUC and Manjula, her Sister completed her SSLC, with great hopes only due to the propping by the Centre.
A SCHOOL DROPOUT CASTING BRICKS FOR CASTLES OF THE RICH
Kamale, rural lass, hailing from a highly impoverished family background lost her father during her childhood. Mother not earning, Kamale did schooling only up to middle school. Having heard of SKIP, Kamale with her mother came to the centre. The centre shouldered the responsibility of her studies, put her back to school and is supporting the family for sustenance and Kamale in her studies. Kamale is now studying in a local Government School.
HAMMERING OUT DREAMS OF THE UNDERAGED
Amith Khan, one amongst twenty children of his minority parents, working in engineering works, was never sent to school. Due to the intervention of the centre, Khan’s parents were convinced of the need to hammer out the dreams of the underaged to study in School. The boy is studying well hoping for a bright future like any other child.
A CHILD AT THE BRINK OF DISEASE
Kirana, a four year old child from an impoverished family of construction coolies playing with the filth unaware of the communicable diseases that would be contacted, was rescued from becoming a child labour and provided with logistic support for wholesome growth.
FEMALE CHILD COOKING A BROTH FOR THE BELLY
Parvathy, Nomadic tribe, had no opportunity to even dream of basic education as the nomadic nature of the parents prevented her from settling in a single place. The child was identified and put into a residential school where the girl child could dream of a future.
LIVING SHEEPISH WITH NO LITERACY
Thippe, a Shepherd boy with not an iota of interest in going to school was rehabilitated by the centre and enthused to take up schooling.
DEBARKING FOR MEAGER RETURNS
Kantha, a rural unfortunate lad had to pass through difficult days in his childhood as he was posted by his parents to cut firewood, which was yielding returns for family sustenance. Engaged in cutting firewood, Kantha missed his studies and was a forced school dropout after a brief schooling only up to sixth standard. For the centre it was one more opportunity to bring a child back to mainstream by convincing his parents to send him back to school.
AN ADEPT MILL WRIGHT MECHANIC FROM ABODE OF HOOLIGANISM
Veeranagappa, a backward community youngster form Mylasandra, an abode of terror and dungeon is a School dropout and was unemployed before he came to the centre, which recognized his innate talents and thoroughly trained him on machining skills. Nagappa is currently a millwright mechanic living with his small family of his wife and two daughters, who attributes all his success to the Centre.
LANGUISHING LAD FROM AP VILLAGE WORKS ON LATHE FOR BETTER LIVELIHOOD
Bhaskar, a backward class school drop out teenager from rural AP infested with Naxalites was at the crossroads when he came to the centre which provided him training on lathe. Bhaskar got a job in a small-scale industry after acquiring technical skills and is eking out his livelihood to support his family.
A TURNER TRAINEE IN A DRILLING EXERCISE – DREAMING TO BE AN ENTREPRENEUR
Chandrappa, a backward class unemployed Arts graduate from Yarab Nagar, a slum near Kumara Swami Layout, had no hope in his life before he approached the Centre. The Centre identified his skills and put him on a rigorous training program on lathe.
The twenty two year old Chandrappa is now an adept turner in an industry and is dreaming of entrepreneurship in a small way.
ADOLESCENT SCHOOL DROPOUT FROM ADDICTED FAMILY ACQUIRING MACHINING SKILLS
Mahadeva an SSLC dropout, from Patnagere bordering the Vrishabhavathi the polluted river, lost interest in education; owing to lack of support from his family as his father is a daily wager and an alcohol addict.
Seventeen year old adolescent Mahadeva was imparted machining and turning skills to enable him fetch a job and support his family.
COBBLERS WAITING FOR CUSTOMERS IN DESPAIR
Marilinga and Siddaiah, traditional teenager cobblers from Gandhinagar, Ramanagaram never had any schooling. Being sensitive to their plight the Centre financed them to get a make shift shop for cobbling. The duo are now famous cobblers in Chanditextiles extension, earning their livelihood with pride.
REHABILITATING AN OCCUPATIONAL HAZARDEE
Palani, an urban youngster ridden with Asthma, was working in foundry and Casting industry and subjected to occupational hazard before he came across the Centre, which rehabilitated him elsewhere in an alternative placement as instructor.
THE BOLD LASS NOW EMPLOYS OTHER TRAINEES IN SUCCESSFUL DTP VENTURE
Shanthamma, Physically handicapped but promising lass, hails from the urban slum of Nayandanahalli. Born in a large family with five children, her parents could not afford to spend for post matriculation as they work on daily wages. Twenty-two year old Shanthamma was imparted training on DTP, Screen-Printing and Bookbinding. Now she owns a bookbinding unit employing a few other fellow trainees.
ORPHAN BOY WORKING IN A UNIT OF GIRL ENTREPRENEUR
Paramesha, a twenty four year old rural youngster who has passed Pre-University is a fatherless unemployed from Kempanahalli near Bangalore. He is highly impoverished and has to bear the responsibility of the family as his mother is not working. The inopportune Paramesh, after getting proper training on DTP and book binding at the Centre joined the fellow trainee entrepreneur Shantha.
TEAM PENTAS – SPIRITED SYNERGY GROUP OF PRINTERS AND BOOK BINDERS
The Synergy group of young entrepreneurs of five SC trainees, who were at cross roads with no employment, now boasts of an efficiently run DTP and Book binding unit. The members of the Team Pentas, who were the benefactors of the centre, are Prakash C, Hanumanthaiah, Kiran Kumar, Mangesh, and Manjunath D. They are presently gainfully self-employed.
TRAINING FOR NORTH EAST TRIBES Under the guidance and vision of Dr. S C Sharma, RVCE entered into a Memorandum of Understanding with Rajiv Gandhi Polytechnic, Arunachal Pradesh (as Project Institution) to undertake various activities such as
a. Sharing and assisting the Project Institution in curricular innovations and expertise in teaching – learning process,
b. Sharing the database of physical and human resources and expertise with Project Institution.
c. Assisting in placement of students passing out of the project institution, d. Arranging short term industrial visits for faculty and support staff and e. Imparting Industrial Training for students. This Memorandum of Understanding is
signed for External Networking activities between Resource Institution and Project
Institution under Tech. Ed. III Project of MHRD, Govt. of India, assisted by World Bank.
Under the aegis of this Memorandum of Understanding, R V College of Engineering conducts knowledge enhancement and augmentation programmes for the students of Rajiv Gandhi Polytechnic, Itanagar, Arunachala Pradesh at regular intervals. The training programme is being offered in the disciplines of Mechanical and Automobile Engineering, Computer Science and Information Technology and Electronics and Communication Engineering and Industrial Engineering. Students from different courses participate in the programmes. The training comprises of exposing the students to various theoretical and practical concepts in the above-mentioned areas. The syllabus is designed keeping in view the latest developments in the related areas and gives a practical approach to the study of various subjects. The training provides the students an insight into the live practices through industrial visits to various topnotch industries in and around Bangalore. The Information Science department offered the training covering an array of advanced concepts in Information Technology that includes: Data Structure with ‘C’, Operating System, Software Engineering, Database Management System, Web Designing, System Software and Object Oriented Programming with C++. The department of Electrical and Electronics Engineering organized the training through three modules including Expert Lectures on current concepts, Hands on Laboratory Sessions, and Industrial visits. The coverage of topics in the training program includes; Computer Networking, Circuit Concepts, Digital Electronics, Renewable Energy sources, Power Electronics, Electrical Equipment Maintenance and Power System Protection. The focus of the training program organized by the Mechanical Engineering discipline was on Automobile engineering and Engines Technology. The program was structured around;
a. Introduction to I C Engines, b. Intensive Laboratory training on I C engine Components and Performance
Test on different kinds of I C engines and c. Concepts of AUTO CAD and Design.
Personality Development programmes are being organized by the department of Industrial Engineering and Management to prepare students for placement. The Program includes
Basic Communication Skills, Time Management, positive attitude, Group Discussions and facing interviews.
WOMEN’S DEVELOPMENT
Background: Throughout Indian history, from the time of Sita, the consort of Lord Rama, there have been women who have occupied a special place in society. Laxmibai, Razia Sultan and Meerabai are names that now belong to history. From contemporary times, women who have left their imprint include Mrs. Vijayalaxmi Pundit, the first woman president of the United Nations, Mrs. Indira Gandhi and Mother Teresa, who was born in Albania but won the Nobel Prize as an Indian missionary for spreading the message of love and peace among the neglected. In the field of sports, many Indian women have won laurels in international events.
The principle of gender equality is enshrined in the Indian Constitution in its Preamble, Fundamental Rights, Fundamental Duties and Directive Principles. The Constitution not only grants equality to women, but also empowers the State to adopt measures of positive discrimination in favour of women.
Within the framework of a democratic polity, our laws, development policies, Plans and programmes have aimed at women’s advancement in different spheres. From the Fifth Five Year Plan (1974-78) onwards, there has been a marked shift in the approach to women’s issues from welfare to development. In recent years, the empowerment of women has been recognized as the central issue in determining the status of women. The National Commission for Women was set up by an Act of Parliament in 1990 to safeguard the rights and legal entitlements of women. The 73rd and 74th Amendments (1993) to the Constitution of India have provided for reservation of seats in the local bodies of Panchayats and Municipalities for women, laying a strong foundation for their participation in decision making at the local levels.
In spite of various initiatives by the successive governments in India, women are among the most vulnerable and marginalized group in work arena. Almost two-fifths of the Indian population lives below the poverty line. Most of these are women and their proportion is increasing. With lower literacy rates than men, and limited access to skills and training, women are less likely than men to find paid work. The vast majority of working women are in the informal economy, characterized by work that is low-paid, with low status and little or no security. Women's wages, on an average, are at least one fourth less than men's. Women's employment is becoming increasingly informal, across all sectors and most regions. Labour
laws are difficult to apply in the informal sector, especially when workers lack the ability to organize themselves effectively. Very few women are members of trade unions and associations, and even fewer hold decision-making positions.
Activities of Women development programme
• Guidance for women students in obtaining PhD degree in science, machinery and technology.
• Guidance for women students in acquiring M.S, M.Sc, M.Tech, and post graduation degrees.
• Skill promotion programmes during leisure hours for the school dropouts, street children, ex-convicts, those deprived of facilities, those devoid of social amenities and the deaf and dumb girls.
31. EXTENSION SERVICES
Sl. No.
Activity
01 Continuing Education Program Mechanical Engineering Skills for LRDE staff 25th Feb to 5th March 2005
02 Four weeks Training programme for Students & Faculty of Rajeeva Gandhi Polytechnic, Itanagar, Arunachalapradesh
03 One Week Training programme for Staff of LRDE, Bangalore
04 One week training programme for Staff of GTRE, Bangalore 32. TUMKUR UNIVERSITY ACTIVITIES
Sl. No.
Programs Date
01 Birthday celebration of Basaveswara, Dr. B. R Ambedkar and Babu Jagajeevanaram
07-05-2009
33. EXTRA CURRICULAR ACTIVITIES
Performing artist - All India Radio (AIR), Bangalore Featured on AIR in several programmes related to research on Carnatic music Interviewed by the Director, Texas Radio Station (FMU) on music and mechanical
engineering, on May 23, 1990 at Texas. Delivered a talk on development of composites, 6 January 1991, in AIR, Bangalore. Delivered a talk on water tanker purifier, 7 Sept 1991, in AIR, Bangalore. Interviewed by many reputed daily’s, journals, weekly’s, monthly magazines Delivered a Lecture cum demonstration on Music for World Peace, Under
Sri.M.A.Thirumalachar Endowment Programme at Bharatiya Vidya Bhavan on 06-05-1998
Given music performances in United States, Japan, China, U.K. etc. in 1986, 1989, 1990, 1991, 1992.
Given violin concert at the Indian institute of world culture on December 19th, 1991. Given concerts at Meenakshi temple in Houston, U.S.A. during June 1990. Given a radio violin concert at FMU, Texas U.S.A., May 1990. Visited music department to study newer research methodologies 1990. Delivered lecture cum demonstration on “Compositions of Sri. Muttuswamy Dikshitar”
in Adarsh Bhavan, Bangalore , 2000 Illustrated Talk on “Compositions of Dikshitar-A Scientific Analysis” in Sri Sringeri
Shankara Mutt, Young Musicians Conference-2001, Yovajana vibhaga, Karnataka Ganakala Parishat.
Given Vocal concert “Saraswathi Namana”, Songs on Goddesses Sharade on Wednesday, the 12 March 2003 at Shringeri Shankara Mutt, Basavanagudi, Bangalore-4
Given vocal concert “Udyanavanadhalli Udhayaraga” in Lalbagh, Bangalore on 16th November 2003.
Technical presentation on “Music for Heeling” at Jayarama Seva Mandali, on 12th July 2005, 8th Block Jayangar, Bangalore.
Given Vocal concert during “Chathurmasya” on 20th August 2006 at Girinagar (SriMata Yedathore)
Given vocal concert on the occasion of “Thyagaraja Jayanthi” on 25th Feb 2006, at NMKRV First grade College for Women, Jayanagara, and Bangalore.
Given vocal concert on the occasion of “Mysore Dasara” 27-09-06 at Jaganmohan Palace, Mysore.
Given vocal concert on the occasion of “Mandu Uthsav-2007” at Bhopal, Madhyapradesh during the year 2007.
Given Vocal Concert on the occasion of “Mysore Dasara”, 8th December 2008, at Jaganmohan Palace, Mysore.
Given Lecture Demonstration at Expert Session of the 41st Music Conference of the Bangalore Gayana Samaja on “Tribute to Smt. D.K. Pattammal” on 8th October 2009.
Given Demonstration Lecture on “Pancha Bhuta Krithis” of Muthuswami Dixitar, on 28th October 2010, at Bangalore Gayana Samaja.