All the names used in this sheet are registered trademarks. All rights reserved.

for Focus3D terrestrial laser scanner

automated protective scanner enclosure

Scan Armor™

Let the Scan Armor™ work for you in dangerous/remote locations to

• Save time

• Avoid risks working safely

• Reduce personal costs and risks

• Prevent hardware damages and thefts

The unique solution that remotely controls your Focus3D !

improve safety

remote control access dangerous area

local control

reduce costs

save time

All the names used in this sheet are registered trademarks. All rights reserved.

Gexcel Srl . Geomatics & Excellence | sales@gexcel.it | www.gexcel.itCentral Administration | Sales Office: c/o CSMT Via Branze 45, I-25123 Brescia, Italy | T. (+39) 030 65 95 001

Registered Office | R&D Lab: c/o Science and Technology Park Polaris, Loc. Piscinamanna, I-09010 Pula (CA), Italy | T. (+39) 070 92 43 2901

Scan Armor™

technical

system

It is a rugged enclosure, compatible with Focus3D laser scanner.The Focus3D is permanently mounted within the enclosure at a fixed location and can be remotely controlled via Ethernet. A remote command opens the enclouse and moves up the scanner to the proper scanning position. After the scanning acquisition the raw 3D data are transferred to the remote control unit, the Focus3D is lowered to the original position and the cover is closed.

technical specifications

• Metal shield, 3mm, basement for Focus3D laser scanner• Software interface for Focus3D providing full control and remote data download• Power Input 100-240 V 50/60 Hz• Ethernet LAN interface for remote control and data download (on request: upward/downward mounting configuration)• Wireless control• Industrial wireless remote control system provided on request

physical and evironmental

Operating Temperature: 0° to +50°C Dimensions when closed: Size (360 x 574 x 850) mm Dimensions when open: Size (614 x 574 x 1077) mm The height when open does not consider the dimensions of the Focus3D and the basement

software

Included:• Web based software for single Scan Armor remote control and for remote Focus3D full control, scan parameters settings and data transfer to the remote control unit (Windows Pc)

Optional:• Software for multi Scan Armors and multi Laser Scanners remote control• Software for automatic self-calibration (related to the object to be measured)• JRC 3D Reconstructor Mining software for volume evaluation• Scan Armor control from Android platform

Automation with intelligent control

The Scan Armor actions (i.e. the opening/closing of the case or the movements of the Focus3D motorized support), the data transfer and the diagnostics are managed by an intelligent controller. All the operations are also stored in a log file and can be verified by the technical supervisor or by the support service.

Robotic actuators

The movements are performed by linear actuators and mechanisms of adaptation. The motors are electric powered at low voltage values. The movements are slow in order to avoid stress on the Focus3D and for safety reasons.

The movements parts are painted in yellow. The stroke of the actuators is limited by internal sensors.

Programmable logic controller

An industrial PLC manages all the handling activities, communicates with the terminals, cares about diagnostics and controls all the events. A touch panel monitor supports local interaction and settings of the PLC. The programming of the PLC and the touch panel is implemented and tested by Gexcel development. The PLC software can be updated or modified locally or remotely via internet.