satyam plywood industries shree shyam inorganics...

Satyam Plywood Industries

Vill.- Haldibari, District – Uttar Dinajpur, West Bengal __________________________________________________________________________

Page No. 1 PSCPL, KOLKATA

SHREE SHYAM INORGANICS PVT. LTD.

PRE FEASIBILITY REPORT

Bhagabatipur, P.S.: Sankrail, Kandua Gram Panchayet,

District: Howrah, Pin- 711302, West Bengal

Shree Shyam Inorganics Pvt. Ltd.

Bhagabatipur, P.S.: Sankrail, Kandua Gram Panchayet, West Bengal __________________________________________________________________________


TABLE OF CONTENT

1 EXECUTIVE SUMMARY 4

2 INTRODUCTION OF THE PROJECT /BACKGROUND INFORMATION

2.1 Identification of the project and project proponent 5

2.2 Brief Description of Nature of Project 7

2.3 Need for the Project & Importance to the Country 8

2.4 Demand and Supply gap 9

2.5 Imports Vs. Indigenous production 10

2.6 Export Possibility 11

2.7 Domestic/Export Markets 11

2.8 Employment Generation (Direct & Indirect) due to the project 11

3 PROJECT DESCRIPTION

3.1 Type of Project including Interlinked and Interdependent Projects, if any 12

3.2 Location (map showing general location, specific location and project

boundary & project site layout) with coordinates

12

3.3 Details of alternate sites considered and the basis of selecting the proposed site, particularly the environmental consideration gone into should

be highlighted.

15

3.4 Size and Magnitude of Operation 15

3.5 Project description with process details (a schematic diagram/flow

chart showing the project layout, components of the project etc.

should be given)

16

3.6 Raw Material Required Along Estimated Quantity, Likely Source, and

Marketing Area of Final Product/s Mode Of Transport Of Raw Material And Finished Product.

17

3.7 Resource optimization/recycling and reuse envisaged in the

project, if any, should be briefly outlined.

17

3.8 Availability of water its source, Energy/Power requirement and source should be given.

17

3.9 Quantity of waste to be generated (liquid and solid) and scheme for their management/disposal.

18

4 SITE ANALYSIS

4.1 Connectivity 19

4.2 Land form, Land use and Land ownership 20

4.3 Topography (along with map) 20

4.4 Existing land use pattern 21

4.5 Existing Infrastructure 23




4.6 Soil Classification 23

4.7 Climatic data from secondary sources 23

4.8 Social Infrastructure available 24

5 PLANNING BRIEF

5.1 Planning concept 25

5.2 Population Projection 25

5.3 Land use planning 26

5.4 Assessment of Infrastructure Demand (Physical & Social) 28

5.5 Amenities/Facilities 28

6 PROPOSED INFRASTRUCTURE

6.1 Industrial Area (Processing Area) 28

6.2 Resident Area (Non Processing Area) 28

6.3 Green Belt 28

6.4 Social Infrastructure 30

6.5 Connectivity (Traffic and transportation Road/Rail/Metro/Water ways etc)

30

6.6 Drinking Water Management (Source & supply of water) 30

6.7 Sewerage System 31

6.8 Industrial Waste Management 31

6.9 Solid waste Management 32

6.10 Power Requirement 32

7 REHABILITATION AND RESETTLEMENT(R&R PLAN) 32

8 PROJECT SCHEDULE AND COST ESTIMATES

8.1 (Likely date of start of construction and likely date of completion (time

schedule for the project to be given)

32

8.2 Estimated project cost and along with analysis in terms

of economic viability of the project.

33

9 ANALYSIS OF PROPOSAL (FINAL RECOMMENDATION) 34




1. EXECUTIVE SUMMARY

M/s. Shree Shyam Inorganics Pvt. Ltd. has proposed for setting up manufacturing

unit of Acid Slurry (LABSA) at J.L.No. 7, Dag No. 15, Bhagabatipur, P.S. Sankrail,

Kandua Gram Panchayet, District. Howrah – 711302, West Bengal. The Khatian

number is 2590. At Present the Company engages in chemicals Trading activity in

which mainly procuring through Imports from so many countries and caters to

different Industry clients. Now company has decided to come in manufacturing

field and set up a manufacturing unit of Acid Slurry (LABSA). The company will

manufacture those products complying with the international quality standards.

Acid Slurry (LABSA) is a detergents active anionic in nature. It forms an excellent

raw material for Dish-Washing Liquid/Cake/Powder, Laundry soaps, Personal care

products likewise bubble bath, toilet cleaners, floor cleaners and for Synthetic

detergent Powder/cake/Liquid. The company’s registered office is situated at 27/1,

Armenian Street, Kolkata – 700001, West Bengal.

Four reaction vessels will be introduced to produce Acid Slurry (1400 MT/month)

and Spent Sulphuric acid (1180 MT/month) considering 25 working days/month.

The manufacturing unit will be located on a freehold land of 0.33 acre or 1335.463

sqm.

http://www.indiamart.com/vsp-udyog-pvtltd/profile.html




2. INTRODUCTION OF THE PROJECT /BACKGROUND INFORMATION

2.1. Identification of the project and project proponent.

Acid Slurry (LABSA) is a detergents active anionic in nature. There are many other

detergent actives such as A.O.S., Fatty alchohol, Non-Ionic etc. But due to cost

effectiveness Acid Slurry (LABSA) dominates the detergent active market. There is

a growing demand of acid slurry. But, there is a huge gap of supply of raw

materials in the eastern part. This project will be a small attempt to supply that

market in eastern India. Global demands for this product are increasing rapidly.

Looking the expected demand of these products in global market as well as in

domestic market, the proposed projects have acceptability in the local and

international market. So, the management has proposed for setting up

manufacturing unit of Acid Slurry (LABSA).

The plant will propose the Following Machinery and Plant Equipments:

Particulars Number Proposed

Capacity/ Size

Reaction Vessels 04 7 MT

Diesel Generator 01 62KVA

The above mentioned equipments are utilized to manufacture:

1. Acid Slurry (LABSA) (1400 MT/month)

2. Spent Sulphuric acid (1180 MT/month)




Table 1: List of Products and Production Capacity

Sr. No

Name of Product Proposed Capacity (MT/month)

1. Acid Slurry (LABSA)

1400

2. Spent Sulphuric acid 1180

Table 2: Details of Products

BACKGROUND OF THE PROMOTERS

The background of the promoters is given as follows:

Particulars Description

Name Mr. Ramakant Pansari

Father’s Name Mr. Shyam Sundar Pansari

Educational Qualification B.com

Sr.

No

Name of

Product

Purity

(%wt)

Yield of

Product

(%)

Batch

Size, Kg

Number of

Batches per

month

Batch

Time (hr)

1. Acid

Slurry

(LABSA)

90% 1.46 28000 50 10 hrs

2. Spent

Sulphuric

Acid

81% 1.23 23590 50 10 hrs





Address 27/1, Armenia Street, Kolkata-

700001

Experience 7 Years

Promoter/Director other than


N.A.


Name Mrs. Sarika Pansari

Father’s Name Sanwar Mal Mussady

Educational Qualification B.Com

Address 27/1, Armenia Street, Kolkata-

700001

Experience 7 Years

Promoter/Director other than


N.A.

2.2. Brief Description of Nature of Project

However subsequently realizing the importance of economy of scale and higher

profitability, the management has decided to go for the manufacture of the

following products:




Acid Slurry (LABSA) and Spent Acid:

Capacity, TPM : Acid Slurry (LABSA) 1400

Spent Acid 1180

Batch Size, MT : 28 MT

No. of Batches/Day : 2

Working Days : 25

Table 3: Required Raw Materials for Acid Slurry (LABSA) and Spent Acid Production

Sl. No.

Raw Material Kg/Batch MT/Batch TPD TPM Remarks

INPUT

1. Linear Alkyl Benzene 19178 19.178 38.356 958.9 Raw Materials 2. Sulphuric Acid 27808 27.808 55.616 1390.4

3. Water 4614 4.614 9.228 230.7

TOTAL 51600 51.6 103.2 2580

OUTPUT

1. Acid Slurry (LABSA)

28000 28.00 56.00 1400

Finished Product

2. Spent Acid 23600 23.60 47.20 1180 By

Product

Total 51600 51.60 103.2 2580

2.3. Need for the Project & Importance to the Country

High demand of Acid Slurry (LABSA) is due to their chemical properties and usage.

Acid Slurry (LABSA) is a detergents active anionic in nature. This is widely used in

several end-user industries due to cost effectiveness. There are many other




detergent actives such as A.O.S., Fatty alchohol, Non-Ionic etc. But due to cost

effectiveness Acid Slurry (LABSA) controls the detergent active market.

The product under the scheme is used mainly to manufacture synthetic detergent

and it forms an excellent raw material for Dish-Washing Liquid/cake/Powder,

Laundry soaps, Personal care products likewise bubble bath, toilet cleaners, floor

cleaners and for Synthetic detergent Powder/Cake/Liquid. It is used in Anionic

specialty formulations. In other Industries like textile industries it is used as

mercerising or washing agent. It is also used for increasing the surface area of

distempers. Spent acid is used by manufacturers of Alum, Ferrous Sulphates,

Super Phosphates etc.

Keeping in mind the glowing requirements of the clients, the Manufacturers,

Exporters and Suppliers are offering quality Acid Slurry (LABSA). Owing to these

enormous usages, the suppliers, exporters and sellers offer it at reasonable prices.

Rapid growth in Asia-Pacific's infrastructure sector poses enormous opportunity for

the Acid Slurry market. The competitive environment of the acid slurry market is

also providing opportunity for manufacturers.

2.4. Demand and Supply gap

Rising global demand in various industrial applications is one of the major drivers

for growth of the Acid Slurry (LABSA) market. Demand is more than production,

hence consumption of Acid Slurry (LABSA) is increasing day by day. This is a




profitable industry, the raw materials and machinery being indigenously available.

Additionally, increasing demand for Acid Slurry (LABSA) from different industries is

fuelling the market.

The products have very high demand in Synthetic Detergent Industry and other

Chemical Industries. Competition in the Indian market swells in recent years. This

had many companies opting out of low-margin segments, as competition resulted

in lower prices. A gap between demand and supply is created. Such notable price

hikes take place when there is removal of some of the key competitors, which

leads to demand override and as a consequence prices start soaring in a free-

pricing market. The proposed new unit will to some extent help to meet this

consumption indigenously fulfil the demand supply gap.

2.5. Imports Vs. Indigenous production

The state and pattern of growth of the economy determine the LABSA

requirement. The requirements may be fulfilled either through indigenous

production and/or through imports. Indian market is open and big that is why

every kind of import is active. Indian technology has been updated at par with

international standards. The working environment in India has also changed

enormously. It is not possible for a developing country to import huge quantities of

LABSA because of foreign exchange constraints where as it is better for a country




to be self-sufficient in its requirements. Proposed products manufacturing in the

country will be very much economical compare to Imports of the same.

2.6. Export Possibility

There is a huge demand of the proposed products in the export market. There may

be huge opportunities to become a global supplier of quality LABSA. Also there are

real abundant market opportunities in the neighboring regions of Asia, Africa and

the Middle East.

2.7. Domestic/Export Markets

The end products will be sold in domestic market and would be largely exported to

the Regulated International Market as per demand.

2.8. Employment Generation (Direct & Indirect) due to the project

Total manpower will be 17, details are given in Table below.

Table 4: Personnel & Employment

Sl. No. Particulars No.

1. Factory Manager 1

2. Quality Control Officer 1

3. Sales Manager 1

4. Staff and other permanent workers

10

5. Casual Workers 4

Total 17




3. PROJECT DESCRIPTION

3.1. Type of Project including Interlinked and Interdependent Projects, if

any

M/s. Shree Shyam Inorganics Pvt. Ltd. has proposed for setting up

manufacturing unit of Acid Slurry (LABSA) at J.L.No. 7, Dag No. 15,

Bhagabatipur, P.S. Sankrail, Kandua Gram Panchayet, District: Howrah – 711302,

West Bengal.

3.2. Location (map showing general location, specific location and project

boundary & project site layout) with coordinates.

The company has acquired 0.33 acre (1335.463 sqm) of land at J.L.No. 7, Dag No.

15, Bhagabatipur, P.S. Sankrail, Kandua Gram Panchayet, District. Howrah –

711302, West Bengal. The Khatian number is 2590. The land already has been

converted into Factory Land and muted in company’s name. The factory will be

constructed on the said land. The land is about 10 KM from Kolkata and is well

connected through NH-6. Sankrail Railway Station is about 4 KM from the

proposed site. The latitude and longitude of the project site is 22°33'42.84"N,

88°10'30.52"E respectively.




Figure1: Project Location




Figure 2: Plant Layout




3.3. Details of alternate sites considered and the basis of selecting the

proposed site, particularly the environmental consideration gone into should

be highlighted.

At a suitable distance from forest cover

Far from nearest habitation.

Well connected to NH-6

3.4. Size and Magnitude of Operation

Size and Magnitude of operation of the proposed projects include:

Unit will propose to manufacture the following products:

1. Acid Slurry (LABSA) (1400 MT/month)

2. Spent Sulphuric acid (1180 MT/month)

Table 5: Details of Machineries and Utilities

Sl. No.

Equipment Qty. Type Size/ Capacity

1. Reaction Vessels Sets 4 Agitator 7 MT

2. Separator 1 Colonical 30Tonne

3. Storage Tank 5 Horizontal 125 KL

4. Measurement Tank 2 Rectangle 5.7 KL

5. Pumps 6 V2BB 3”/2 ½”

6. Cooling Tower 1 3842 ID 5 TR

5. Diesel Generator 1 Engine Alternator With Silencer

62KVA




3.5. Project description with process details (a schematic diagram/flow chart

showing the project layout, components of the project etc. should be given)

Flow sheet of manufacturing process of Acid Slurry (LABSA) and Spent Acid

LAB- Linear Alkyl Benzene

H2SO4- Sulphuric Acid




3.6. Raw Material Required Along Estimated Quantity, Likely Source, and

Marketing Area of Final Product/s Mode Of Transport Of Raw Material

And Finished Product.

For Acid Slurry (LABSA) and Spent Acid

Linear Alkyl Benzene TPM 958.9

Sulphuric Acid TPM 1390.4

Water TPM 230.7

3.7. Resource optimization/recycling and reuse envisaged in the project, if

any, should be briefly outlined.

The company has proposed for setting up manufacturing unit for production

of Acid Slurry (LABSA) and Spent Acid. The raw materials shall be stored in the

storage tank. By adoption continuous improvement in technology and process, the

reduction in process waste generation will be achieved by proper and efficient

handling of raw materials, wastages of raw materials will be reduced. The Spent

Sulphuric Acid is widely used to manufacture fertilisers like SSP, Magnesium

Sulphate etc.

3.8. Availability of water its source, Energy/Power requirement and source

should be given.

Electricity: The contracted power will be 93KVA. The power will be obtained from

West Bengal State Electricity Board (WBSEB). Apart from this, there will be one

D.G. set with capacity of 62 KVA as backup unit.




Water: The company will meet its water requirement from deep water tube well.

The water will also be available from Rain Water Harvesting (RWH) system. The

estimated demand for water is 9.77 KLD for meeting the entire requirements for

domestic consumption, gardening and Industrial uses.

Total water requirement including for process & others and domestic water is

projected Table 6.

Table 6: Total Water Requirement

Sl. No. Particulars Water Requirement

(KLD)

1. Domestic 0.15

2. Gardening 0.05

3. Industrial

Process 9.3

Cooling (Make up) 0.27

Washing -

Total 9.77

Fuel Requirement: The fuel required for DG sets is Diesel. It will be for D.G. set

62 KVA @ 10L/Day.

3.9. Quantity of waste to be generated (liquid and solid) and scheme for their

management/disposal.

Domestic wastewater (0.1KLD) will be generated and discharged through septic

tank into soak pit.




Table 7: Source & Management of generated waste

Source Type of waste Quantity/Annum

Physical Form

Management

Plant & Machinery

Used / Spent Oil

0.2KL Liquid Lubricant or Sell to approved Recyclers

Raw Material Storage & Handling

Discarded Containers/ Barrels

1500 kg Solid Decontamination and Reuse or Sell to scrap vendors.

Process H2SO4 (75-85 %)

14160MT Liquid Collection, Storage, Transportation and Sell to Authorized Actual Users.

Sewage

Sludge

- 250kg Solid To be given to Govt. Approved incinerators

Hi

About 150m2 isolated areas are allotted for storage of Hazardous Wastes storage.

4. SITE ANALYSIS

4.1 Connectivity

The area is connected by road to other industrial town. It is well connected

through NH-6. Sankrail Railway Station is about 4 KM from the location. All the

civic amenities like market, bus stand, hospital, school, college, hotel, restaurant

etc. all are available in the town which is about 5-7 KM from the site. Distance of

important Cities are given below.

Kolkata-10 KM Burdwan- 80 KM




Figure 3: Map of Project site

4.2. Land form, Land use and Land ownership

The company has acquired 0.33 acre (1335.463 sqm) of land at J.L.No. 7, Dag No.

15, Bhagabatipur, P.S. Sankrail, Kandua Gram Panchayet, District. Howrah –

711302, West Bengal. The Khatian number is 2590. The land is converted into

Factory Land and muted in company’s name. The factory will be constructed on

the said land.

4.3. Topography (along with map)

The latitude and longitude of the project site is 22°33'42.84"N and 88°10'30.52"E




respectively.

The area has been marked on Survey of India Topo Map No. 79 B/2.

Figure 4: Topo Map of Project site

4.4. Existing land use pattern (Agriculture, on-agriculture, forest, water

bodies (including area under CRZ), shortest distances from the periphery

of the project to the periphery of the forests, national park, wild life

sanctuary, eco sensitive areas, water bodies (distance from the HFL of

the river), CRZ in case of notified industrial area, a copy of the Gazette




notification should be industrial area, a copy of the Gazette notification

should be given.

Existing General land use

Table 8: Land Utilization Statistics of Howrah District (in ’000 ha.)

Source: Agriculture Contingency Plan for District: Howrah

1 Geographical Area 138.67

2 Cultivable Area 85.57

3 Forest Area -

4 Land under nonagricultural use 51.24

5 Permanent pastures -

6 Cultivable wasteland 0.21

7 Land under Misc. tree crops and groves 1.20

8 Barren and uncultivable land 1.0

9 Current fallows 4.6

10 Other fallows 0.24

As per above table under land utilization statistics of the Howrah district about 62

percent of area was under cultivated area. Nonagricultural area is about 37

percent. The land utilization statistics of the district thus show enough scopes for

both agricultural and non-agricultural activities of the district.

Shortest Distance From Following Particulars:

Periphery of the project to periphery of the forests:- None (within 10 km)

Wild Life Sanctuary: - None (within 10 km)

Eco sensitive area: - None (within 10 km)

Water bodies (distance from the HFL of the river):- Ganga River (approx. 6.5 Km)

Notified industrial area: - None (within 10 Km)




4.5. Existing Infrastructure

This is a new project. The land is already converted into Factory Land and muted

in company’s name. The land is at clear possession.

4.6. Soil Classification

The alluvial soils are the dominant soil type in Howrah District. The district is

occupied by the thick pile of unconsolidated sediments laid down by the Ganga-

Brahmaputra system. The unconsolidated sediments are made up of clay, silt,

sand and gravel of Quaternary age overlying Mio-Pliocene sediments. Fresh water

aquifers occur under confined condition.

Table 9: Soil classification of Howrah District (in ’000 ha.)

Source: Agriculture Contingency Plan for District: Howrah

Major Soils Area (‘000 ha) Percent (%)

Clayey 13.82 16

Clayey loamy 42.35 49

Loamy 30.25 35

4.7. Climatic data from secondary sources

The main seasons are summer, rainy season, a short autumn, and winter. The

summer in this region is prominent for excessive humidity, with annual maximum

temperature varies between 32-39°C. In early summer, brief squalls and severe

thunderstorms known as Kalbaisakhi or Norwesters, often seen. Monsoon arrives

in the 1st /2nd week of June and stay up to 1st week of October. Annual normal

https://en.wikipedia.org/wiki/Norwesters




rainfall is 1461 millimetre per year. Winter (December - February) is mild and

pleasant and exists for a short period with chilling dry wind coming from the

northeast. The temperature generally does not fall below 100C. A cold and dry

northern wind blows in the winter, substantially lowering the humidity level.

4.8. Social Infrastructure available

As per District Census Handbook, Howrah (Census of India, 2011, SERIES-20,

PART XII – B), population of Howrah in 2011 is 4,850,029; whereas male and

female are 2,500,819 and 2,349,210 respectively. With regards to Sex Ratio in

Howrah District, it stood at 939 per 1000 male in 2011 which is much lower than

the State’s Sex Ratio (950). Howrah District has experienced increment in Child

Sex Ratio from 956 in 2001 Census to 962 in 2011.

Details of Population in Sankrail are given below in Table 10.

Table 10: Details of Population in Sankrail

Total Male Female

Population 343,933 176,748 167,185

Population in the age-group 0-6 37,531 19,233 18,298

Scheduled Castes population 77,458 39,590 37,868

Scheduled Tribes population 1,272 641 631

Literates 254,663 136,214 118,449

Total workers 130,597 105,006 25,591

Main workers 107,069 91,728 15,341

Cultivators 993 902 91




5. PLANNING BRIEF

5.1. Planning concept (type of industries, facilities, transportation etc) town

and country planning/Development authority Classification.

The project is at J.L.No. 7, Dag No. 15, Bhagabatipur, P.S. Sankrail, Kandua Gram

Panchayet, District. Howrah –711302, West Bengal. Necessary development will be

made.

5.2. Population Projection

The percentage of urban share of Population of Howrah District has expanded

from 50.4% (2001 Census) to 63.4% (2011 Census) of total Population of

respective Census. In total 3,074,144 people lives in urban areas of which males

are 1,591,300 and females are 1,482,844. The total population of the district living

in rural areas is 1,775,885 of which males and females are 909,519 and 866,366

respectively. Howrah has an average literacy rate of 89.86%, higher than the

national average of 74.04%. Male literacy is 92.34%, and female literacy is

87.13%. In Howrah, 8% of the population is under 6 years of age. The density of

Population (Population per square km) of the District is 3,306 per square km. Total

literates in Howrah District were 3,605,206 of which male and female were

1,942,824 and 1,662,382 respectively. Religion data of Howrah is given in Table

11.




Table 11: Religion data of Sankrail and Howrah

Description Sankrail Howrah

District

Hindu 65.52 % 72.90%

Muslims 33.95 % 26.20%

Others 0.53 % 0.9

5.3. Land use planning (breakup along with green belt etc.)

The Shree Shyam Inorganics Pvt. Ltd. occupies about 0.33 acre (1335.463

sqm) of land at J.L.No. 7, Dag No. 15, Bhagabatipur, P.S. Sankrail, Kandua Gram

Panchayet, District. Howrah –711302, West Bengal. The Khatian number is 2590.

Sankrail Railway Station is within 4 KM from the location. Thus it is well connected

through rail and roads.




Figure 5: Green Belt Development




5.4. Assessment of Infrastructure Demand (Physical & Social)

Physical & Social Infrastructure

Secondary survey has revealed that drinking water facility is satisfactory to the

local people as all the villages are having either well or tube well as source of

drinking water. Under medical facilities all the system such as allopathic,

homeopathic and ayurvedic medicines are available at area at a distance of 2-3

KMs. Most of the villages are connected by kuchha roads to district headquarter.

There is educational facility in the area. There is electricity in most of the villages.

This project will provide employment for people.

5.5. Amenities/Facilities

Greenbelt area may be developed in the surrounding project site. Drinking water

and power is available at nearby villages. First aid box with all necessary materials

will kept all time in the office building for use as and when required.

6. PROPOSED INFRASTRUCTURE

6.1. Industrial Area (Processing Area)

Developing of Greenbelt area inside the plant and surrounding the area.

6.2. Resident Area (Non Processing Area)

No residential area is proposed.

6.3. Green Belt

An extensive plantation within the boundary limits of the plant is considered during

project work by planting about 2300 saplings making a two row deep green belt




along the periphery (spacing 2.0 m x 2.0 m) and all along internal roads, storage

areas and dumps leaving only adequate truck access. The total land area covered

for greenbelt will be 33% of the total area i.e., 440.703 sqm.

Table 12: List of big trees for proposed plantation

No. Common name Scientific name Family

01. Radhachura Delonix regia Caesalpinaceae

02. Arjun, Arjuna Terminalia arjuna Combretaceae

03. Nim Azadirachta indica Meliaceae

04. Ghoranim Melia azedarch Meliaceae

05. Tantul, Tentuli Tamarindus indica Caesal pinaceae

06. Chatim Alstonia scholaris Apocynaceae

07. Akashmoni Acacia moniliformis Mimosaceae

08. Aam Mangifera indica Anacardiaceae

09. Sisso Dalbergia sissoo Papilionaceae

10. Pakur Ficus infectoria Moraceae

11. Sirish Albizia Lebbeck Mimosaceae

12. Jarul Lagerstroemia speciosa Lythraceae

13. Debdaru Polyalthia longifolia Anonaceae

14. Bot Ficus benghalensis Moraceae

15. Ashwatha Ficus religiosa Moraceae

16. Karanj Derris indica Fabaceae

17. Jhaun Casuarina equisetifolia Casuarinaceae




No. Common name Scientific name Family

18. Krishnachura Caesalpinia pulcherrima Caesalpinaceae

6.4. Social Infrastructure

See section 4.8.

6.5. Connectivity (Traffic and transportation Road/Rail/Metro/Water ways

etc)

The area is connected by road to other industrial town. It is well connected through

NH-6. Sankrail Railway Station is about 4 KM from the location. All the civic

amenities like market, bus stand, hospital, school, college, hotel, restaurant etc. all

are available in the town which is about 5-7 KM from the site. Distance of

important Cities are given below.

Kolkata-10 KM Burdwan- 80 KM

6.6. Drinking Water Management (Source & supply of water)

Water: The company will meet its water requirement from deep water tube well.

The water will also be available from Rain Water Harvesting (RWH) system. The

estimated demand for water is 9.77 KLD for meeting the entire requirements for

domestic consumption, gardening and Industrial uses.

The water requirement including for process & others and domestic water is

projected as follows:




Table 13: Water Requirement

6.7. Sewerage System

There will not be any process waste water or cooling water from the unit. Closed

circuit cooling system will be adopted in cooling. Hence there will not be any waste

water generation from process and cooling in the Acid Slurry plant. Sanitary waste

water will be treated in septic tank followed by soak pit as per PHE norms.

6.8. Industrial Waste Management

Sources of hazardous waste are Process Wastes (Spent Acid), discarded

containers/Barrel from storage and handling of raw materials and spent/used oil

generation from plant machinery. The unit will provided dedicated storage area of

about 150 m2 for the hazardous waste storage within premises having impervious

floor and roof cover with leachate collection system.

Particulars Water Requirement (KLD)

Domestic 0.15

Gardening 0.05

Industrial

Process 9.3

Cooling (Make up) 0.27

Washing -




6.9. Solid waste Management

The solid waste generation is proposed to be disposed off as follows:

Table 14: Solid waste generation and Management

Type of Solid Waste Estimated Generation

(kg/Month)

Process of Disposal

Discarded Containers/

Barrels

125 Decontamination and Reuse or Sell to scrap vendors.

Sewage Sludge 20 To be given to Govt. approved incinerators.

6.10. Power Requirement

The contracted power will be 93KVA. The power will be obtained from West Bengal

State Electricity Board (WBSEB). Apart from this, there will be one D.G. set with

capacity of 62 KVA as backup unit.

7. REHABILITATION AND RESETTLEMENT(R&R PLAN)

(Policy to adopted (Central State) in respect of the project affected

person including home oustees, land oustee and landless labour (A brief

outline to be given).

No, R&R Plan is proposed.

8. PROJECT SCHEDULE AND COST ESTIMATES

8.1. (Likely date of start of construction and likely date of completion (time

schedule for the project to be given)




The Schedule Of Implementation For The Proposed Project Is Given Below

Activity Commencement Completion

Land acquisition and development Acquired and developed land.

Civil works, Buildings, Foundation of Machineries 01.04.2017 30.05.2017

Structural fabrication and erection of technological

structures

01.06.2017 15.06.2017

Placement of Orders of Plant and Machinery 01.06.2017 30.06.2017

Erection of Equipments 01.07.2017 25.07.2017

Trial Run and Commissioning 30.07.2017 30.07.2017

Commercial Operation Date 01.08.2017

8.2. Estimated project cost and along with analysis in terms of economic

viability of the project.

The cost of the project and means of finance is proposed to be as follows:

Sl.

No.

Item Cost

(Rs.)

1. Land 3,550,000

2. Civil & Construction 3,900,000

3. Plant & Machinery 7,535,275

4. Utility 1,052,750

5. Furniture and Fixtures 105,000

6. Contingencies 629,651

Total 16,772,676




The project cost is felt reasonable and comparable as per opinion in the current

date of assessment and made sample checks from the market and also discussed

with the industry experts on similar field.

Means of Finance

The means of finance for the proposed project is as follows:

Particulars Rs.

Promoter's Contribution (Share Capital +

Reserve & Surplus)

11,772,676

Unsecured Loan 5,000,000

Term Loan 0.00

Total 16,772,676

9. ANALYSIS OF PROPOSAL (FINAL RECOMMENDATION)

CONCLUSION

The technical feasibility and financial viability of the project has been reviewed

with reference to the project with reference to overall company as a whole.

Our review has been done on the basis of the present scenario and documents

made available to us by the company. We have made the assessment afresh and

made the changes in assumptions wherever felt required. A fresh assessment has

been made and changes will be made wherever felt required.

Based on our analysis it may be concluded that

a) The project is financially and technically viable.




b) Overall financial liquidity and profitability parameters of the project appeared to be

logical and reasonable.

c) However, development of this project has certain beneficial impact/effects in terms

of providing the employment opportunities.

d) The operation of plant has important positive impact on the socio-economic

environment of the area. This will help to maintain the development of this area

including further growth of physical infrastructure facilities.

For the interest of development and improve the social conditions of the local

habitants, this project should be allowed after considering all the environment

aspects.

satyam plywood industries shree shyam inorganics...

Documents