satellite migration homecast
TRANSCRIPT
SATELLITE MIGRATION PROJECTContractor OrientationDreamSatellite.com
SATELLITE FREQUENCY
Homecast
1. Press “menu”, select “installation” and press “ok”.
1. Select “factory reset” and press “ok”.
2
SATELLITE FREQUENCY
Homecast
1. Enter the “access code”, default is “1234”.
1. A prompt will appear, select “yes” and press “ok”.
3
SATELLITE FREQUENCY
Homecast
1. Wait for the Dream Satellite TV Logo to appear. Press “menu”, select “installation” and press “ok”.
1. Go to “dish setup” and press “ok”.
4
SATELLITE FREQUENCY
Homecast
1. Enter “access code”, default is “1234”. 1. Under “transponder”, press “right navigation key” on remote control.
5
SATELLITE FREQUENCY
Homecast
1. Select “new TS” and press “ok”. 1. Enter the following parameters:a. Frequency - 12390
b. Polarity - Verticalc. Symbol Rate - 25600
6
SATELLITE FREQUENCY
Homecast
1. Press “ok” twice. Under “installation”, select “manual search” and press “ok”.
1. Select “frequency” and press “right navigational key” on remote control. Select the “new frequency” added and press “ok”.
7
SATELLITE FREQUENCY
Homecast
1. Go to “network search” and press “right navigational key” to “enable” setting.
1. Press “ok” and a display will show “do you want to save changes?”, select “yes” and press “ok”.
8
SATELLITE FREQUENCY
Homecast
1. Press “exit” button. 2. Under installation. Repeat steps 6-15
but enter the frequency “12430” in step 11.
1. Repeat steps 6-15 but enter the frequency “12470” in step 11.
9
FORMS & FORMATS10
JOB ORDER FORM
Control No.:
Installer Name : Dealer :
Subscriber Name : Subscriber Contact No. :
Address :
Items Replaced :
Low Noise Block (LNB) Converter Others :
Antenna Dish
Bracket
RG-6 Cable
I certify that that the Out-Door-Unit (ODU) has been re-aligned/relocated and my unit is working properly.
Subscriber/Representative Name & Signature