safety valves brochure

Designed for Superior Performance and Safety

Safety Valves

Application and General Use

Kelly Cocks are devices that allow for shutting the internal bore of the drill string keeping the mud column inthe top drive or the Kelly when disconnecting from the drill string. It controls the flow of the mud duringnormal drilling operations and is operated from the rig floor. Standard configurations include two Kelly Cocks;an upper Kelly Valve and lower Kelly Valve.

Product Description

The Kelly Cock Valve is designed and manufactured as a one-piece anda two-piece Kelly Valve for free-passage and maximum circulation of thedrilling fluid without pressure loss. Kelly Valves are supplied with eitherAPI or proprietary connections and manufactured according to the latestedition of the API 7-1 specification.

KC2S Kelly Valves are available in either standard or H2S resistantversions and are supplied according to Class 1 construction.

Main Features

simple construction for trouble-free operations and easy servicing

sealed lubrication packing

10,000 and 15,000 PSI working pressure (testing pressure 15,000 and 22,500 PSI respectively)

KC2S Kelly Valves are delivered with an operating wrench anddisassembly tool

Other configurations available upon request, subject to engineeringdepartment approval.

Hydraulic Testing

Each Kelly Valve is hydraulically bench tested according to API spec 7-1 (latest edition) and deliveredwith its individual pressure test records.

The tests are carried out in two steps:

SHELL TESTING during which the valve is pressurized to the test pressure for 3 minutes, thendepressurized and pressurized again for at least 10 minutes.

SEAT TESTING during which the valve is pressurized from the pin end to its working pressure for atleast 5 minutes.

During the pressure-holding period timing starts when pressure stabilization is achieved. No visuallydetectable leakage is permitted during the test time period and the pressure drop shall be no greaterthan maximum 1% of the pressure test value with a zero leak rate.

Kelly Cock

The KC2S product rangeis available in 9 differentseries allowing thefollowing passage IDs:

SERIES ID (IN)

201 1-1/4

202 1-3/4

203 2-1/8

204 2-1/4

205 2-7/16

206 2-13/16

207 3-1/16

208 3-1/4

209 4-1/4

2

One Piece Kelly Cock Valve

Valve Compatibility

In case the Check Valve has to be dropped into the drill string,the compatibility of Check Valve OD and KC2S free passage is a critical factor. The table below shows the compatibilitybetween KC2S Kelly Cocks and Drop-in Check Valves.

Figure 1 – Kelly CockCutaway View

Figure 2 – Kelly CockExploded View

StandardAssembly

H2S TrimAssembly

One Piece Kelly Cock

TYPE OF KIT DESCRIPTION STANDARD VERSION H2S TRIM VERSION

Seal Kit Items 2, 6, 8, 9, 11, 13 & 14Includes all parts needed forreplacement each time the Valve isdisassembled; i.e. O-Ring Seals, Springs,Knob Plate and Snap Ring or Screw Set.

Includes all inside Valve componentsplus its Operating Wrench andDisassembling Tool.

Includes all KC2S Inside Valvecomponents.

Complete Repair Kit with Tooling

Complete Repair Kit without Tooling

Items 2 to 16

Items 2 to 14

Items 6, 8, 9, 11, 13, 14 & 17

Items 3 to 14 &17

Items 3 to 17

One Piece Kelly Cock

17 – Ring Screw Set

2 – Snap Ring

4 – Retainer Ring

3 – Split Retainer Ring

13 – Upper Spring

5 – Upper Seat

6 – Upper Seat O-Ring

7 – Spherical Plug

11 – Lower Seat O-Ring

12 – Lower Seat

14 – Lower Spring

1 – Body (*)

10 – Operating Knob

9 – Knob Plate

8 – Knob O Ring

15 – Disassembly Tool*

16 – Operating Wrench*

(*) Supplied With Complete Assembly

KELLY COCK REQUIRED RDCV

KC2S SERIES SERIES

202 1-3/4 ID 901

203 2-1/8 ID 902

204 2-1/4 ID 903

204/205 2-1/4 ID 904

206 2-13/16 ID 905

207 3-1/16 ID 906

207 3-1/16 ID 907

208 3-1/4 ID 908

3

Two Piece Kelly Cock Valve

Figure 1 – Kelly CockCutaway View

Figure 2 – Kelly CockExploded View

Two Piece Kelly Cock

TYPE OF KIT DESCRIPTION STANDARD VERSION H2S TRIM VERSION

Seal Kit Items 2, 6, 8, 9, 11, 13, 14 & 18Includes all parts needed for replacementeach time the Valve is disassembled; i.e.O-Ring Seals, Springs, Knob Plate andSnap Ring or Screw Set.

Includes all internal parts plus OperatingWrench and Disassembling Tool.

Includes all internal parts.

Complete Repair Kit with Tooling

Complete Repair Kit without Tooling

Items 2 to 16 & 18

Items 2 to 14 & 18

Items 6, 8, 9, 11, 13, 14,17&18

Items 3 to 14 &17-18

Items 3 to 18

Two Piece Kelly Cock

17 – Ring Screw Set

2 – Snap Ring

4 – Retainer Ring

3 – Split Retainer Ring

13 – Upper Spring

5 – Upper Seat

6 – Upper Seat O-Ring

7 – Spherical Plug

11 – Lower Seat O-Ring

12 – Lower Seat

14 – Lower Spring

1 – Body (Upper and Lower pieces) (*)

18 – Seal Intermediate Connection

10 – Operating Knob

9 – Knob Plate

8 – Knob O-Ring

15 – Disassembly Tool*

16 – Operating Wrench*

(*) Supplied With Complete Assembly

StandardAssembly

H2S TrimAssembly

4

Operational Benefits

Vallourec offers KC2S Kelly Valves with PTFE rings inserted in both upper and lower seats, which provide highsealing capability, even at low pressures. KC2S internal parts are made of high grade heat treated stainlesssteel. The design of the body limits plug rotation to 90° between open and closed positions. Two KC2Sversions are offered to suit drilling environments:

The standard version for normal drilling conditions with an inside surface treated to enhance mud corrosionresistance and maintenance operations.

The H2S trim version which has been designed for H2S environments with internal parts made of corrosionresistant materials matching the NACE MR0175 standard (latest edition), fitted in a standard body.

Spare Parts and References

ITEM SERIES

201 202 203 204 205 206 207 208 209

Standard Repair Kit

Seal kit for One Piece Kelly Cock KCK201S021 KCK202S021 KCK203S021 KCK204S021 KCK205S021 KCK206S021 KCK207S021 KCK208S021 KCK209S021

Seal kit for Two Piece Kelly Cock KCK201S106 KCK202S103 KCK203S106 KCK204S102 KCK205S104 KCK206S103 KCK207S136 KCK208S104 KCK209S100

Complete repair kit withouttooling for One Piece Kelly Cock

KCK201S023 KCK202S025Valve OD < 4 1/4

KCK203S102Valve OD < 5 3/8

KCK204S100Valve OD < 6

KCK205S023 KCK206S023 KCK207S125 Valve OD < 7 3/8

KCK202S023Valve OD >= 4 1/4

KCK203S023 Valve OD >= 5 3/8

KCK204S023 Valve OD >= 6

KCK207S023 Valve OD >= 7 3/8

KCK208S023 KCK209S023

Complete repair kit withouttooling for Two Piece Kelly Cock

KCK201S108 KCK202S111Valve OD < 4 1/4

KCK203S108 Valve OD < 5 3/8

KCK204S103 Valve OD < 6




KCK203S110 Valve OD >= 5 3/8

KCK207S140 Valve OD >= 7 3/8

KCK208S105 KCK209S101

Complete repair kit with toolingfor One Piece Kelly Cock





KCK203S100 Valve OD >= 5 7/8




KCK202S0224 1/4 =< Valve OD

< 6 1/4

KCK203S022 5 3/8 =< Valve OD

< 5 7/8

KCK207S022 Valve OD >= 7 3/8

KCK208S022 KCK209S022


Complete repair kit with toolingfor Two Piece Kelly Cock





KCK203S110 Valve OD >= 5 7/8




KCK202S1044 1/4 =< Valve OD

< 6 1/4

KCK203S109 5 3/8 =< Valve OD

< 5 7/8

KCK207S139 Valve OD >= 7 3/8

KCK208S106 KCK209S102


ITEM SERIES

201 202 203 204 205 206 207 208 209

H2S TRIM Repair Kit

Seal kit for One Piece Kelly Cock KCK201H021 KCK202H021 KCK203H021 KCK204H021 KCK206H024 KCK207H021 KCK208H024 Not created

Seal kit for Two Piece Kelly Cock KCK201H101 KCK202H104 KCK203H105 KCK204H100 KCK206H103 KCK207H104 KCK208H100 Not created

Complete repair kit withouttooling for One Piece Kelly Cock

KCK201H023 KCK202H109Valve OD < 4 1/4

KCK203H109Valve OD < 5 3/8

/ KCK205H023 KCK206H026 KCK207H112 Valve OD < 7 3/8

KCK202H023Valve OD >= 4 1/4

KCK203H023 Valve OD >= 5 3/8

KCK204H023 Valve OD >= 6

KCK207H023 Valve OD >= 7 3/8

KCK208H026 Not created

Complete repair kit withouttooling for Two Piece Kelly Cock

KCK201H102 KCK202H108Valve OD < 4 1/4

KCK203H110 Valve OD < 5 3/8

/


KCK205H100 KCK206H104 KCK207H106 Valve OD < 7 3/8


KCK203H106 Valve OD >= 5 3/8

KCK207H109 Valve OD >= 7 3/8


Complete repair kit with toolingfor One Piece Kelly Cock





KCK203H104 Valve OD >= 5 7/8

/



KCK202H022Valve 4 1/4 =< OD

< 6 1/4

KCK203H022 5 3/8 =< Valve OD

< 5 7/8

KCK207H109 Valve OD >= 7 3/8



Complete repair kit with toolingfor Two Piece Kelly Cock





KCK203H108 Valve OD >= 5 7/8

/



KCK202H106Valve 4 1/4 =< OD

> 6 1/4

KCK203H107 Valve 5 3/8 =< OD

> 5 7/8

KCK207H108 Valve OD >= 7 3/8



5

Application and General Use

Wells can at times experience unpredictable pressure differentials causing flow into the well bore that canpotentially be catastrophic for the rig and rig personnel, if uncontrolled. Safety Valves are an essentialcomponent to maintaining the safety of the well and drilling operations. Safety Valves are configured in thedrill string and used on the rig floor and down-hole to manage safe operations while controlling kicks andpreventing back flow of the drilling mud during the drilling process.

Product Description

The Inside BOP Valve (BVR) is a heavy duty Check Valve connected to the drill string for use on the rig floorlevel to protect from kicks at surface. It can be left in the drill string as long as necessary to reestablish wellcontrol with over-balanced pressure.

I-BOP Valves are supplied with either API or with proprietary connections.All I-BOP Valves are manufactured to API 7-1 specification latest edition.

I-BOP Valves are available in both standard or H2S resistant versions andsupplied according to Class 1 construction.

Main Features

OD sizes ranging from 3-3/8” to 9-1/2”

ID sizes ranging from 1-1/2” to 2-13/16”

10,000 and 15,000 PSI working pressure (testing pressure 15,000 and22,500 PSI respectively)

Other configurations available upon request, subject to engineering department approval.

Inside BOP (I-BOP)

The I-BOP product rangecomes with 4 sizescorresponding to internalpart dimensions as follows:

INTERNAL TRIM SERIES VALVE SEAT ID (IN)

1 1-1/2

2 1-3/4

3 2-1/4

4 2-13/16

Hydraulic Testing

Each I-BOP Valve is hydraulically bench tested according to API spec 7-1 (latest edition) and delivered with its individual pressure record sheets.

The pressure test is carried out in two steps:

SHELL TESTING during which the valve is pressurized to the test pressure for 3 minutes, thendepressurized and pressurized again for at least 10 minutes (see figures 1 & 2).

SEAT TESTING during which the valve is pressurized from the pin end to its working pressure for at least 5 minutes (see figures 1 & 2).

During the pressure-holding period, timing starts when pressure stabilization is achieved. No visuallydetectable leakage is permitted during the test time period and pressure drop shall be no greater thanmaximum 1% of the pressure test value with a zero leak rate.


I-BOP body and internal parts are made of high grade heat treated steel. The I-BOP Valve sealing is achieved through a PTFE ring inserted in the valve. Two I-BOP construction versions are available:

The standard version which is suitable for normal drilling conditions. The standard body inner surface issurface treated to improve resistance against mud corrosion and maintenance operations.

The H2S trim version which has been designed for H2S environments. Internal parts are made of corrosionresistant materials matching NACE MR0175 standard (latest edition) and fitted in a standard body.

6

Inside BOP

Figure 1 – Inside BOPCutaway View

Figure 2 – Inside BOPExploded View

1 – Release Screw

2 – Plug

3 – Release Rod

4 – Upper Valve body

5 – Small O-Ring

6 – Large O-Ring

7 – Valve Seat

8 – Valve Head with Insert

9 – Valve Spring

10 – Lower Valve Body

7

ITEM STANDARD VERSION

Trim 1 Trim 2 Trim 3 Trim 4

1 Valve Release Screw BVP100S001 BVP200S001 BVP200S001 BVP400S001

5 Valve Head with Insert BVP100S005 BVP200S005 BVP300S005 BVP400S005

6 Valve Seat BVP100S006 BVP200S006 BVP300S006 BVP400S006

7 Valve Spring BVP100S007 BVP200S007 BVP300S007 BVP400S007

9 Large O-Ring JOIN044N01 JOIN053N01 JOINR41N01 JOINR50N01

10 Small O-Ring JOINR33N01 JOINR36N01 JOINR36N01 JOINR41N01

Seal Kit BVK100S001 BVK200S001 BVK300S001 BVK400S001

Complete Repair Kit BVK100S002 BVK200S002 BVK300S002 BVK400S002

ITEM H2S SERVICE VERSION


1 Valve Release Screw BVP100S001 BVP200S001 BVP200S001 BVP400S001

5 Valve Head with Insert BVP100H005 BVP200H005 BVP300H005 BVP400H005

6 Valve Seat BVP100H006 BVP200H006 BVP300H006 BVP400H006

7 Valve Spring BVP100S007 BVP200S007 BVP300S007 BVP400S007

9 Large O-Ring JOIN044N01 JOIN053N01 JOINR41N01 JOINR50N01

10 Small O-Ring JOINR33N01 JOINR36N01 JOINR36N01 JOINR41N01

Seal Kit BVK100S001 BVK200S001 BVK300S001 BVK400S001

Complete Repair Kit BVK100H002 BVK200H002 BVK300H002 BVK400H002

ITEM STANDARD VERSION


2 Plug

3 Release Rod

4 Upper Valve Body

8 Lower Valve Body


Part numbers depend on valve configurationwill be supply upon request

ITEM H2S SERVICE VERSION


2 Plug

3 Release Rod

4 Upper Valve Body

8 Lower Valve Body

Part numbers depend on valve configurationwill be supply upon request

8

Product Description

The Retrievable Drop-in Check Valve (RDCV) is used to control back flow from high pressure formations into thewell and through the drill string back to the surface. It also allows for downward fluid circulation within the drillstring. When the back flow is under control, the Drop-in Check Valve can be retrieved using a wire line.

If a kick or back flow starts while tripping out the pipes, it can be controlled with a drill pipe Safety Valve or KellyCock to close the flow thru the drill pipe before reconnecting the Kelly and for pumping the RDCV down to itslanding sub.

By design, the Check Valve is equipped with a self-locking (under down hole pressure) feature.

Main Features

Landing Sub OD ranging from 3-3/8 to 8-1/2"

Check Valve OD sizes ranging from 1-9/32” to 3-7/64”

Check Valve ID sizes ranging from 3/8” to 1-11/16”

10,000 and 15,000 PSI working pressure (testing pressure 15,000 and 22,500 PSI respectively)

Other configurations available upon request, subject to engineering department approval.

Figure 1 – Landing SubCutaway View

L5 – Snap Ring(for standard version)

L6 – Sub Pin(for H2S Trim Version)

L3 – Sub Seals

L1 – Sub Body

L2 – Sub Sleeve

L4 – Nut

Figure 2 – Landing SubExploded View

The RDCV product range has 8 Valveseries corresponding to differentCheck Valve outside diameters (OD):

Retrievable Drop in Check Valve (RDCV)

SERIES CHECK VALVE OD (IN)

901 1-9/32

902 1-25/32

903 2-5/32

904 2-15/64

905 2-15/32

906 2-27/32

907 3-3/64

908 3-7/64

9

Hydraulic Testing

Each RDCV is hydraulically bench tested according to API spec 7-1 (latest edition) and delivered with its individualpressure test records.

The tests are carried out in two steps:

SHELL TESTING during which the valve is pressurized to the test pressure for 3 minutes, then depressurized andpressurized again for at least 10 minutes.

SEAT TESTING during which the valve is pressurized from the pin end to its working pressure for at least 5 minutes.

During the pressure-holding period, timing shall start when pressure stabilization is achieved. No visually detectableleakage is permitted during the test time period and the pressure drop shall be no greater than maximum 1% of thepressure test value with a zero leak rate.

Valve Compatibility

In case the Check Valve has to be dropped into the drill string,the compatibility of Check Valve OD and KC2S free passage is acritical factor. The table to the right shows the compatibilitybetween KC2S Kelly Cocks and Drop-in Check Valves:

Figure 3 – Check ValveCutaway View

V2 – Latch Nut

V4 – Latch

V3 – Latch Spring

V1 – Sleeve

V7 – Valve Seals

V6 – Screws

V5 – Seat

V8 – Ball

V9 – Ball Spring

V10 – Nose

Figure 4 – Check ValveExploded View

Figure 5 – OvershotCutaway View

Figure 6 – OvershotExploded View

RDCV KELLY COCK REQUIRED

SERIES KC2S SERIES

901 202 1-3/4 ID

902 203 2-1/8 ID

903 204 2-1/4 ID

904 204/205 2-1/4 ID

905 206 2-13/16 ID

906 207 3-1/16 ID

907 207 3-1/16 ID

908 208 3-1/4 ID

O2 – Overshot Connection

O3 – Shear Pin

O4 – Elastic Pin(for Standard & H2S Trim Versions)

O1 – H2S Pin(for Full NACE Version)

O5 – Rod

10


RDCVs body and internal parts are made of high grade heat treated steel. Sealing is achieved through a metal to metal contact between a ball and a seat.

Two RDCV versions exist to suit all drilling environments:

The standard version which is suitable for normal drilling conditions.

The H2S trim version which has been designed for H2S environments in which the internal parts are madeof corrosion resistant materials matching the NACE MR0175 standard (latest edition), fitted in a standard steellanding sub.

Operational Data


ITEM SERIES

901 902 903 904 905 906 907 908

Overshot RDO901S001 RDO902S001 RDO903S001 RDO904S001 RDO905S001 RDO906S001 RDO907S001 RDO908S001

Check Valve RDV901S001 RDV902S001 RDV903S001 RDV904S001 RDV905S001 RDV906S001 RDV907S001 RDV908S001

Landing Sub Sleeve Kit RDS901S001 RDS902S001 RDS903S001 RDS904S001 RDS905S001 RDS906S001 RDS907S001 RDS908S001

Seal Kit includes items V6x2, V7x2, V9 RDK901S001 RDK902S001 RDK903S001 RDK904S001 RDK905S001 RDK906S001 RDK907S001 RDK908S001

ITEM SERIES

901 902 903 904 905 906 907 908

Overshot RDO901S001 RDO902S001 RDO903S001 RDO904S001 RDO905S001 RDO906S001 RDO907S001 RDO908S001

Check Valve RDV901H001 RDV902H001 RDV903H001 RDV904H001 RDV905H001 RDV906H001 RDV907H001 RDV908H001

Landing Sub Sleeve Kit RDS901H001 RDS902H001 RDS903H001 RDS904H001 RDS905H001 RDS906H001 RDS907H001 RDS908H001

Seal Kit Includes items V6x2, V7x2, V9 RDK901H001 RDK902H001 RDK903H001 RDK904H001 RDK905H001 RDK906H001 RDK907H001 RDK908H001

H2S Service Version

Standard Version

ITEM SERIES

901 902 903 904 905 906 907 908

Check Valve OD 1 9/32 1 25/32 2 5/32 2 15/64 2 15/32 2 27/32 3 3/64 3 7/64

Requested Drill String ID 1 11/32 1 27/32 2 7/32 2 19/64 2 17/32 2 29/32 3 7/64 3 11/64

Check Valve ID 3/8 5/8 3/4 7/8 1 1/8 1 3/8 1 9/16 1 11/16

Check Valve weight (lbs/kg) 5.3 / 2.4 6.6 / 3.0 15.4 / 7.0 19.0 / 8.6 24.4 / 11.0 28.2 / 12.8 32.7 / 14.8 38.0 / 15.8

Landing Sub Drift diameter 1 5/32 1 29/64 1 27/32 2 11/64 2 1/8 2 33/64 2 11/16 2 25/32

Overshot weight (lbs/kg) 1.3 / 0.6 3.8 / 1.7 4.8 / 2.2 5.8 / 2.6 8.8 / 4.0 9.3 / 4.2 10.1 / 4.6 11.0 / 5.0

Standard Version

includes items L2 to L5

includes items L2,L3,L4,L6

11

Connection Body OD Passage ID / Series Service Pressure Sh to Sh Reboring Construction Approximate Approximate Part Number Repair kit Length Connection Weight [lbs] Weight [kg] without Tooling

2 7/8 PAC VAM EIS 3-1/4 1-1/4 / 201 Standard 15 23 1-1/2 2 pieces 37 17 KCA201S501 KCK201S108NC 26 3-3/8 1-1/4 / 201 Standard 15 13 W/O 1 piece 26 12 KCA201S001 KCK201S023

NC26 VAM EIS 3-3/8 1-1/4 / 201 Standard 15 23 1-5/8 2 pieces 42 19 KCA201S502 KCK201S108NC31 4-1/4 1-1/4 / 201 Standard 15 13 W/O 1 piece 46 21 KCA201S113 KCK201S023

NC38 VAM EIS 4-3/4 1-1/4 / 201 Standard 15 23 2-9/16 2 pieces 99 45 KCA201S507 KCK201S108VAM Express VX24 3-3/8 1-1/4 / 201 Standard 15 23 1-1/2 2 pieces 42 19 KCA201S503 KCK201S108VAM Express VX26 3-5/8 1-1/4 / 201 Standard 15 23 1-1/2 2 pieces 51 23 KCA201S504 KCK201S108VAM Express VX28 3-5/8 1-1/4 / 201 Standard 15 23 2 2 pieces 51 23 KCA201S505 KCK201S108VAM Express VX38 4-3/4 1-1/4 / 201 Standard 15 24 2-11/16 2 pieces 106 48 KCA201S508 KCK201S1082 7/8 PAC VAM EIS 3-1/4 1-1/4 / 201 H2S TRIM 10 23 1-1/2 2 pieces 37 17 KCA201T501 KCK201H102

NC 26 3-3/8 1-1/4 / 201 H2S TRIM 10 13 W/O 1 piece 26 12 KCA201T001 KCK201H023NC26 VAM EIS 3-3/8 1-1/4 / 201 H2S TRIM 10 23 1-5/8 2 pieces 42 19 KCA201T502 KCK201H102

NC31 4-1/4 1-1/4 / 201 H2S TRIM 10 13 W/O 1 piece 46 21 KCA201T102 KCK201H023NC38 VAM EIS 4-3/4 1-1/4 / 201 H2S TRIM 10 23 2-9/16 2 pieces 99 45 KCA201T507 KCK201H102

VAM Express VX24 3-3/8 1-1/4 / 201 H2S TRIM 10 23 1-1/2 2 pieces 42 19 KCA201T503 KCK201H102VAM Express VX26 3-5/8 1-1/4 / 201 H2S TRIM 10 23 1-1/2 2 pieces 51 23 KCA201T504 KCK201H102VAM Express VX28 3-5/8 1-1/4 / 201 H2S TRIM 10 23 2 2 pieces 51 23 KCA201T505 KCK201H102VAM Express VX38 4-3/4 1-1/4 / 201 H2S TRIM 10 24 2-11/16 2 pieces 106 48 KCA201T508 KCK201H102

Kelly Cock – Series 201


NC31 4-1/4 1-3/4 / 202 Standard 15 13 W/O 1 piece 40 18 KCA202S002 KCK202S023NC38 4-3/4 1-3/4 / 202 Standard 15 13 W/O 1 piece 51 23 KCA202S001 KCK202S023NC38 5 1-3/4 / 202 Standard 15 13 W/O 1 piece 57 26 KCA202S131 KCK202S023

NC38 VAM EIS 4-3/4 1-3/4 / 202 Standard 15 24 2-9/16 2 pieces 106 48 KCA202S504 KCK202S105NC38 VAM EIS 5 1-3/4 / 202 Standard 15 24 2-9/16 2 pieces 119 54 KCA202S509 KCK202S105

VAM Express VX31 4 1-3/4 / 202 Standard 15 24 2 2 pieces 71 32 KCA202S501 KCK202S111VAM Express VX31 4-1/8 1-3/4 / 202 Standard 15 24 2 2 pieces 77 35 KCA202S502 KCK202S111VAM Express VX38 4-3/4 1-3/4 / 202 Standard 15 25 2-11/16 2 pieces 110 50 KCA202S505 KCK202S105VAM Express VX38 4-7/8 1-3/4 / 202 Standard 15 25 2-11/16 2 pieces 117 53 KCA202S507 KCK202S105VAM Express VX39 4-5/8 1-3/4 / 202 Standard 15 25 2-13/16 2 pieces 104 47 KCA202S503 KCK202S105VAM Express VX39 4-3/4 1-3/4 / 202 Standard 15 25 2-13/16 2 pieces 110 50 KCA202S506 KCK202S105VAM Express VX39 4-7/8 1-3/4 / 202 Standard 15 25 2-13/16 2 pieces 117 53 KCA202S508 KCK202S105

NC31 4-1/4 1-3/4 / 202 H2S TRIM 10 13 W/O 1 piece 40 18 KCA202T002 KCK202H023NC38 4-3/4 1-3/4 / 202 H2S TRIM 10 13 W/O 1 piece 51 23 KCA202T001 KCK202H023NC38 5 1-3/4 / 202 H2S TRIM 10 13 W/O 1 piece 57 26 KCA202T111 KCK202H023

NC38 VAM EIS 4-3/4 1-3/4 / 202 H2S TRIM 10 24 2-9/16 2 pieces 106 48 KCA202T504 KCK202H105NC38 VAM EIS 5 1-3/4 / 202 H2S TRIM 10 24 2-9/16 2 pieces 119 54 KCA202T509 KCK202H105

VAM Express VX31 4 1-3/4 / 202 H2S TRIM 10 24 2 2 pieces 71 32 KCA202T501 KCK202H108VAM Express VX31 4-1/8 1-3/4 / 202 H2S TRIM 10 24 2 2 pieces 77 35 KCA202T502 KCK202H108VAM Express VX38 4-3/4 1-3/4 / 202 H2S TRIM 10 25 2-11/16 2 pieces 110 50 KCA202T505 KCK202H105VAM Express VX38 4-7/8 1-3/4 / 202 H2S TRIM 10 25 2-11/16 2 pieces 117 53 KCA202T507 KCK202H105VAM Express VX39 4-5/8 1-3/4 / 202 H2S TRIM 10 25 2-13/16 2 pieces 104 47 KCA202T503 KCK202H105VAM Express VX39 4-3/4 1-3/4 / 202 H2S TRIM 10 25 2-13/16 2 pieces 110 50 KCA202T506 KCK202H105VAM Express VX39 4-7/8 1-3/4 / 202 H2S TRIM 10 25 2-13/16 2 pieces 117 53 KCA202T508 KCK202H105



NC38 5 2-1/8 / 203 Standard 15 15 W/O 1 piece 60 27 KCA203S127 KCK203S102NC38 5-1/4 2-1/8 / 203 Standard 15 15 W/O 1 piece 68 31 KCA203S128 KCK203S102NC38 5-3/8 2-1/8 / 203 Standard 15 15 W/O 1 piece 73 33 KCA203S001 KCK203S023

NC38 VAM EIS 5-1/4 2-1/8 / 203 Standard 15 24 2-9/16 2 pieces 115 52 KCA203S504 KCK203S108NC38 VAM EIS 5-3/8 2-1/8 / 203 Standard 15 24 2-9/16 2 pieces 121 55 KCA203S505 KCK203S110

NC40 5-1/4 2-1/8 / 203 Standard 15 15 W/O 1 piece 68 31 KCA203S129 KCK203S102NC40 VAM EIS 5 2-1/8 / 203 Standard 15 24 2-5/8 2 pieces 101 46 KCA203S501 KCK203S108

VAM Express VX39 5 2-1/8 / 203 Standard 15 26 2-13/16 2 pieces 104 47 KCA203S502 KCK203S108VAM Express VX40 5 2-1/8 / 203 Standard 15 26 3 2 pieces 104 47 KCA203S503 KCK203S108

NC38 5 2-1/8 / 203 H2S TRIM 10 15 W/O 1 piece 60 27 KCA203T106 KCK203H109NC38 5-1/4 2-1/8 / 203 H2S TRIM 10 15 W/O 1 piece 68 31 KCA203T107 KCK203H109NC38 5-3/8 2-1/8 / 203 H2S TRIM 10 15 W/O 1 piece 73 33 KCA203T001 KCK203H023

NC38 VAM EIS 5-1/4 2-1/8 / 203 H2S TRIM 10 24 2-9/16 2 pieces 115 52 KCA203T504 KCK203H110NC38 VAM EIS 5-3/8 2-1/8 / 203 H2S TRIM 10 24 2-9/16 2 pieces 121 55 KCA203T505 KCK203H106

NC40 5-1/4 2-1/8 / 203 H2S TRIM 10 15 W/O 1 piece 68 31 KCA203T108 KCK203H109NC40 VAM EIS 5 2-1/8 / 203 H2S TRIM 10 24 2-5/8 2 pieces 101 46 KCA203T501 KCK203H110

VAM Express VX39 5 2-1/8 / 203 H2S TRIM 10 26 2-13/16 2 pieces 104 47 KCA203T502 KCK203H110VAM Express VX40 5 2-1/8 / 203 H2S TRIM 10 26 3 2 pieces 104 47 KCA203T503 KCK203H110

Upper Kelly Cocks4 1/2 REG LH 5-3/4 2-1/8 / 203 Standard 15 15 W/O 1 piece 86 39 KCA203S002 KCK203S0234 1/2 REG LH 5-3/4 2-1/8 / 203 H2S TRIM 10 15 W/O 1 piece 86 39 KCA203T002 KCK203H023


12


NC46 6-1/4 2-1/4 / 204 Standard 15 15 W/O 1 piece 101 46 KCA204S103 KCK204S023NC46 6-3/8 2-1/4 / 204 Standard 15 15 W/O 1 piece 106 48 KCA204S002 KCK204S023

NC46 VAM EIS 6-1/4 2-1/4 / 204 Standard 15 26 3 2 pieces 181 82 KCA204S503 KCK204S104NC50 6-3/8 2-1/4 / 204 Standard 15 15 W/O 1 piece 106 48 KCA204S001 KCK204S023

VAM Express VX46 6-1/4 2-1/4 / 204 Standard 15 29 3-3/4 2 pieces 203 92 KCA204S504 KCK204S104VAM Express VX50 6-1/2 2-1/4 / 204 Standard 15 29 3-3/4 2 pieces 223 101 KCA204S505 KCK204S104VAM Express VX54 6-1/2 2-1/4 / 204 Standard 15 29 4 2 pieces 223 101 KCA204S506 KCK204S104

NC46 6-1/4 2-1/4 / 204 H2S TRIM 10 15 W/O 1 piece 101 46 KCA204T101 KCK204H023NC46 6-3/8 2-1/4 / 204 H2S TRIM 10 15 W/O 1 piece 106 48 KCA204T002 KCK204H023

NC46 VAM EIS 6-1/4 2-1/4 / 204 H2S TRIM 10 26 3 2 pieces 181 82 KCA204T503 KCK204H101NC50 6-3/8 2-1/4 / 204 H2S TRIM 10 15 W/O 1 piece 106 48 KCA204T001 KCK204H023

VAM Express VX46 6-1/4 2-1/4 / 204 H2S TRIM 10 29 3-3/4 2 pieces 203 92 KCA204T504 KCK204H101VAM Express VX50 6-1/2 2-1/4 / 204 H2S TRIM 10 29 3-3/4 2 pieces 223 101 KCA204T505 KCK204H101VAM Express VX54 6-1/2 2-1/4 / 204 H2S TRIM 10 29 4 2 pieces 223 101 KCA204T506 KCK204H101



NC46 6-5/8 2-7/16 / 205 Standard 15 16 W/O 1 piece 90 41 KCA205S002 KCK205S023NC50 6-5/8 2-7/16 / 205 Standard 15 16 W/O 1 piece 101 46 KCA205S001 KCK205S023NC46 6-5/8 2-7/16 / 205 H2S TRIM 10 16 W/O 1 piece 90 41 KCA205T002 KCK205H023NC50 6-5/8 2-7/16 / 205 H2S TRIM 10 16 W/O 1 piece 101 46 KCA205T001 KCK205H023



5 1/2 FH 7 2-13/16 / 206 Standard 15 16 W/O 1 piece 130 59 KCA206S123 KCK206S0235 1/2 FH 7-1/4 2-13/16 / 206 Standard 15 16 W/O 1 piece 141 64 KCA206S003 KCK206S023

5 1/2 FH VAM EIS 7 2-13/16 / 206 Standard 15 27 4 2 pieces 216 98 KCA206S509 KCK206S1055 1/2 FH VAM EIS 7-1/4 2-13/16 / 206 Standard 15 27 4 2 pieces 238 108 KCA206S511 KCK206S105NC46 VAM EIS 6-3/8 2-13/16 / 206 Standard 15 27 3 2 pieces 168 76 KCA206S501 KCK206S105

NC50 6-1/2 2-13/16 / 206 Standard 15 16 W/O 1 piece 106 48 KCA206S122 KCK206S023NC50 6-5/8 2-13/16 / 206 Standard 15 16 W/O 1 piece 112 51 KCA206S001 KCK206S023NC50 6-3/4 2-13/16 / 206 Standard 15 16 W/O 1 piece 117 53 KCA206S152 KCK206S023NC50 7 2-13/16 / 206 Standard 15 16 W/O 1 piece 130 59 KCA206S101 KCK206S023

NC50 VAM EIS 6-1/2 2-13/16 / 206 Standard 15 27 3-1/4 2 pieces 172 78 KCA206S502 KCK206S105NC50 VAM EIS 6-5/8 2-13/16 / 206 Standard 15 27 3-1/4 2 pieces 183 83 KCA206S505 KCK206S105

VAM Express VX46 6-1/2 2-13/16 / 206 Standard 15 29 3-3/4 2 pieces 190 86 KCA206S503 KCK206S105VAM Express VX50 6-1/2 2-13/16 / 206 Standard 15 29 3-3/4 2 pieces 190 86 KCA206S504 KCK206S105VAM Express VX50 6-5/8 2-13/16 / 206 Standard 15 29 3-3/4 2 pieces 201 91 KCA206S506 KCK206S105VAM Express VX54 6-5/8 2-13/16 / 206 Standard 15 29 4 2 pieces 201 91 KCA206S507 KCK206S105VAM Express VX54 6-3/4 2-13/16 / 206 Standard 15 29 4 2 pieces 209 95 KCA206S508 KCK206S105VAM Express VX57 7 2-13/16 / 206 Standard 15 29 4-1/2 2 pieces 234 106 KCA206S510 KCK206S105VAM Express VX57 7-1/4 2-13/16 / 206 Standard 15 29 4-1/2 2 pieces 256 116 KCA206S512 KCK206S105

5 1/2 FH 7 2-13/16 / 206 H2S TRIM 10 16 W/O 1 piece 130 59 KCA206T122 KCK206H0265 1/2 FH 7-1/4 2-13/16 / 206 H2S TRIM 10 16 W/O 1 piece 141 64 KCA206T003 KCK206H026

5 1/2 FH VAM EIS 7 2-13/16 / 206 H2S TRIM 10 27 4 2 pieces 216 98 KCA206T509 KCK206H1045 1/2 FH VAM EIS 7-1/4 2-13/16 / 206 H2S TRIM 10 27 4 2 pieces 238 108 KCA206T511 KCK206H104NC46 VAM EIS 6-3/8 2-13/16 / 206 H2S TRIM 10 27 3 2 pieces 168 76 KCA206T501 KCK206H104

NC50 6-1/2 2-13/16 / 206 H2S TRIM 10 16 W/O 1 piece 106 48 KCA206T102 KCK206H026NC50 6-5/8 2-13/16 / 206 H2S TRIM 10 16 W/O 1 piece 112 51 KCA206T001 KCK206H026NC50 6-3/4 2-13/16 / 206 H2S TRIM 10 16 W/O 1 piece 117 53 KCA206T121 KCK206H026NC50 7 2-13/16 / 206 H2S TRIM 10 16 W/O 1 piece 130 59 KCA206T123 KCK206H026

NC50 VAM EIS 6-1/2 2-13/16 / 206 H2S TRIM 10 27 3-1/4 2 pieces 172 78 KCA206T502 KCK206H104NC50 VAM EIS 6-5/8 2-13/16 / 206 H2S TRIM 10 27 3-1/4 2 pieces 205 93 KCA206T505 KCK206H104

VAM Express VX46 6-1/2 2-13/16 / 206 H2S TRIM 10 29 3-3/4 2 pieces 190 86 KCA206T503 KCK206H104VAM Express VX50 6-1/2 2-13/16 / 206 H2S TRIM 10 29 3-3/4 2 pieces 190 86 KCA206T504 KCK206H104VAM Express VX50 6-5/8 2-13/16 / 206 H2S TRIM 10 29 3-3/4 2 pieces 201 91 KCA206T506 KCK206H104VAM Express VX54 6-5/8 2-13/16 / 206 H2S TRIM 10 29 4 2 pieces 201 91 KCA206T507 KCK206H104VAM Express VX54 6-3/4 2-13/16 / 206 H2S TRIM 10 29 4 2 pieces 209 95 KCA206T508 KCK206H104VAM Express VX57 7 2-13/16 / 206 H2S TRIM 10 29 4-1/2 2 pieces 234 106 KCA206T510 KCK206H104VAM Express VX57 7-1/4 2-13/16 / 206 H2S TRIM 10 29 4-1/2 2 pieces 256 116 KCA206T512 KCK206H104



13


6 5/8 FH 8 3-1/4 / 208 Standard 15 17 W/O 1 piece 181 82 KCA208S102 KCK208S0236 5/8 FH 8-1/2 3-1/4 / 208 Standard 15 17 W/O 1 piece 212 96 KCA208S101 KCK208S023

6 5/8 FH VAM EIS 8 3-1/4 / 208 Standard 15 29 4-1/2 2 pieces 315 143 KCA208S505 KCK208S1056 5/8 FH VAM EIS 8-1/2 3-1/4 / 208 Standard 15 29 4-1/2 2 pieces 370 168 KCA208S501 KCK208S105VAM Express VX57 7-3/4 3-1/4 / 208 Standard 15 29 4 2 pieces 291 132 KCA208S502 KCK208S105VAM Express VX65 7-3/4 3-1/4 / 208 Standard 15 32 5 2 pieces 324 147 KCA208S503 KCK208S105VAM Express VX69 8 3-1/4 / 208 Standard 15 32 5-1/2 2 pieces 351 159 KCA208S504 KCK208S105

6 5/8 FH 8 3-1/4 / 208 H2S TRIM 10 17 W/O 1 piece 181 82 KCA208T101 KCK208H0266 5/8 FH 8-1/2 3-1/4 / 208 H2S TRIM 10 17 W/O 1 piece 212 96 KCA208T102 KCK208H026

6 5/8 FH VAM EIS 8 3-1/4 / 208 H2S TRIM 10 29 4-1/2 2 pieces 315 143 KCA208T505 KCK208H1016 5/8 FH VAM EIS 8-1/2 3-1/4 / 208 H2S TRIM 10 29 4-1/2 2 pieces 370 168 KCA208T501 KCK208H101VAM Express VX57 7-3/4 3-1/4 / 208 H2S TRIM 10 29 4 2 pieces 291 132 KCA208T502 KCK208H101VAM Express VX65 7-3/4 3-1/4 / 208 H2S TRIM 10 32 5 2 pieces 324 147 KCA208T503 KCK208H101VAM Express VX69 8 3-1/4 / 208 H2S TRIM 10 32 5-1/2 2 pieces 351 159 KCA208T504 KCK208H101




8 5/8 REG 10 4-1/4 / 209 Standard 15 19 W/O 1 piece 313 142 KCA209S002 KCK209S023



5 1/2 FH 7-1/4 3-1/16 / 207 Standard 15 17 W/O 1 piece 137 62 KCA207S163 KCK207S0235 1/2 FH 7-3/4 3-1/16 / 207 Standard 15 17 W/O 1 piece 165 75 KCA207S164 KCK207S023

5 1/2 FH VAM EIS 7 3-1/16 / 207 Standard 15 28 3-1/2 2 pieces 218 99 KCA207S501 KCK207S1385 1/2 FH VAM EIS 7-1/4 3-1/16 / 207 Standard 15 28 3-1/2 2 pieces 240 109 KCA207S506 KCK207S1405 1/2 FH VAM EIS 7-3/8 3-1/16 / 207 Standard 15 28 3-1/2 2 pieces 251 114 KCA207S508 KCK207S140

6 5/8 FH 8 3-1/16 / 207 Standard 15 17 W/O 1 piece 183 83 KCA207S100 KCK207S0236 5/8 FH 8-1/4 3-1/16 / 207 Standard 15 17 W/O 1 piece 198 90 KCA207S166 KCK207S0236 5/8 FH 8-1/2 3-1/16 / 207 Standard 15 17 W/O 1 piece 214 97 KCA207S103 KCK207S023

6 5/8 FH VAM EIS 8 3-1/16 / 207 Standard 15 28 4-1/2 2 pieces 311 141 KCA207S509 KCK207S1406 5/8 FH VAM EIS 8-1/4 3-1/16 / 207 Standard 15 28 4-1/2 2 pieces 335 152 KCA207S511 KCK207S1406 5/8 FH VAM EIS 8-1/2 3-1/16 / 207 Standard 15 28 4-1/2 2 pieces 362 164 KCA207S513 KCK207S140

6 5/8 REG 7-3/8 3-1/16 / 207 Standard 15 17 W/O 1 piece 143 65 KCA207S131 KCK207S0236 5/8 REG 7-3/4 3-1/16 / 207 Standard 15 17 W/O 1 piece 165 75 KCA207S165 KCK207S0236 5/8 REG 8 3-1/16 / 207 Standard 15 17 W/O 1 piece 183 83 KCA207S109 KCK207S023

VAM Express VX50 7 3-1/16 / 207 Standard 15 28 3-3/4 2 pieces 245 111 KCA207S503 KCK207S138VAM Express VX54 7 3-1/16 / 207 Standard 15 28 4 2 pieces 245 111 KCA207S504 KCK207S138VAM Express VX57 7 3-1/16 / 207 Standard 15 31 4-1/2 2 pieces 245 111 KCA207S505 KCK207S138VAM Express VX57 7-1/4 3-1/16 / 207 Standard 15 31 4-1/2 2 pieces 269 122 KCA207S507 KCK207S140VAM Express VX65 8 3-1/16 / 207 Standard 15 31 5 2 pieces 348 158 KCA207S510 KCK207S140VAM Express VX65 8-1/4 3-1/16 / 207 Standard 15 31 5 2 pieces 375 170 KCA207S512 KCK207S140

5 1/2 FH 7-1/4 3-1/16 / 207 H2S TRIM 10 17 W/O 1 piece 137 62 KCA207T100 KCK207H0235 1/2 FH 7-3/4 3-1/16 / 207 H2S TRIM 10 17 W/O 1 piece 165 75 KCA207T127 KCK207H023

5 1/2 FH VAM EIS 7 3-1/16 / 207 H2S TRIM 10 28 3-1/2 2 pieces 218 99 KCA207T501 KCK207H1065 1/2 FH VAM EIS 7-1/4 3-1/16 / 207 H2S TRIM 10 28 3-1/2 2 pieces 240 109 KCA207T506 KCK207H1095 1/2 FH VAM EIS 7-3/8 3-1/16 / 207 H2S TRIM 10 28 3-1/2 2 pieces 251 114 KCA207T508 KCK207H109

6 5/8 FH 8 3-1/16 / 207 H2S TRIM 10 17 W/O 1 piece 179 81 KCA207T102 KCK207H0236 5/8 FH 8-1/4 3-1/16 / 207 H2S TRIM 10 17 W/O 1 piece 198 90 KCA207T130 KCK207H0236 5/8 FH 8-1/2 3-1/16 / 207 H2S TRIM 10 17 W/O 1 piece 214 97 KCA207T131 KCK207H023

6 5/8 FH VAM EIS 8 3-1/16 / 207 H2S TRIM 10 28 4-1/2 2 pieces 311 141 KCA207T509 KCK207H1096 5/8 FH VAM EIS 8-1/4 3-1/16 / 207 H2S TRIM 10 28 4-1/2 2 pieces 335 152 KCA207T511 KCK207H1096 5/8 FH VAM EIS 8-1/2 3-1/16 / 207 H2S TRIM 10 28 4-1/2 2 pieces 362 164 KCA207T513 KCK207H109

6 5/8 REG 7-3/8 3-1/16 / 207 H2S TRIM 10 17 W/O 1 piece 143 65 KCA207T126 KCK207H0236 5/8 REG 7-3/4 3-1/16 / 207 H2S TRIM 10 17 W/O 1 piece 165 75 KCA207T128 KCK207H0236 5/8 REG 8 3-1/16 / 207 H2S TRIM 10 17 W/O 1 piece 179 81 KCA207T129 KCK207H023

VAM Express VX50 7 3-1/16 / 207 H2S TRIM 10 28 3-3/4 2 pieces 245 111 KCA207T503 KCK207H106VAM Express VX54 7 3-1/16 / 207 H2S TRIM 10 28 4 2 pieces 245 111 KCA207T504 KCK207H106VAM Express VX57 7 3-1/16 / 207 H2S TRIM 10 31 4-1/2 2 pieces 245 111 KCA207T505 KCK207H106VAM Express VX57 7-1/4 3-1/16 / 207 H2S TRIM 10 31 4-1/2 2 pieces 269 122 KCA207T507 KCK207H109VAM Express VX65 8 3-1/16 / 207 H2S TRIM 10 31 5 2 pieces 348 158 KCA207T510 KCK207H109VAM Express VX65 8-1/4 3-1/16 / 207 H2S TRIM 10 31 5 2 pieces 375 170 KCA207T512 KCK207H109



14

Connection OD Passage ID / Series Service Sh to Sh Pressure Reboring Approximate Approximate Part Number Seal KitLength Connection Weight [lbs] Weight [kg]

NC26 3-3/8 1-1/2 / Trim 1 Standard 32 15 / 66 30 BVA1N2S001 BVK100S001NC26 VAM EIS 3-3/8 1-1/2 / Trim 1 Standard 32 15 1-5/8 66 30 BVA1V5S500 BVK100S001NC31 VAM EIS 4-1/8 1-1/2 / Trim 1 Standard 32 15 2 106 48 BVA1V8S500 BVK100S001

VAM Express VX24 3-3/8 1-1/2 / Trim 1 Standard 32 15 1-1/2 66 30 BVA1ACS500 BVK100S001VAM Express VX28 3-5/8 1-1/2 / Trim 1 Standard 32 15 2 79 36 BVA1AAS500 BVK100S001

NC26 3-3/8 1-1/2 / Trim 1 H2S Trim 32 10 W/O 66 30 BVA1N2T001 BVK100S001NC26 VAM EIS 3-3/8 1-1/2 / Trim 1 H2S Trim 32 10 1-5/8 66 30 BVA1V5T500 BVK100S001NC31 VAM EIS 4-1/8 1-1/2 / Trim 1 H2S Trim 32 10 2 106 48 BVA1V8T500 BVK100S001

VAM Express VX24 3-3/8 1-1/2 / Trim 1 H2S Trim 32 10 1-1/2 66 30 BVA1ACT500 BVK100S001VAM Express VX28 3-5/8 1-1/2 / Trim 1 H2S Trim 32 10 2 79 36 BVA1AAT500 BVK100S001

I-BOP – Trim 1


NC31 4-1/4 1-3/4 / Trim 2 Standard 34 15 W/O 108 49 BVA2N3S100 BVK200S001NC38 VAM EIS 4-3/4 1-3/4 / Trim 2 Standard 34 15 2-9/16 143 65 BVA2V1S500 BVK200S001

VAM Express VX31 4-1/8 1-3/4 / Trim 2 Standard 34 15 2 101 46 BVA2A1S500 BVK200S001VAM Express VX39 4-3/4 1-3/4 / Trim 2 Standard 34 15 2-13/16 143 65 BVA2A0S500 BVK200S001VAM Express VX39 5 1-3/4 / Trim 2 Standard 34 15 2-13/16 161 73 BVA2A0S501 BVK200S001

NC31 4-1/4 1-3/4 / Trim 2 H2S Trim 34 10 W/O 108 49 BVA2N3T100 BVK200S001NC38 VAM EIS 4-3/4 1-3/4 / Trim 2 H2S Trim 34 10 2 9/16 143 65 BVA2V1T500 BVK200S001

VAM Express VX31 4-1/8 1-3/4 / Trim 2 H2S Trim 34 10 2 101 46 BVA2A1T500 BVK200S001VAM Express VX39 4-3/4 1-3/4 / Trim 2 H2S Trim 34 10 2-13/16 143 65 BVA2A0T500 BVK200S001VAM Express VX39 5 1-3/4 / Trim 2 H2S Trim 34 10 2-13/16 161 73 BVA2A0T501 BVK200S001

I-BOP – Trim 2


NC38 4-3/4 2-1/4 / Trim 3 Standard 33 15 W/O 134 61 BVA3N5S001 BVK300S001NC38 5 2-1/4 / Trim 3 Standard 33 15 W/O 157 71 BVA3N5S002 BVK300S001NC38 5-1/4 2-1/4 / Trim 3 Standard 33 15 W/O 170 77 BVA3N5S113 BVK300S001

NC38 VAM EIS 4-3/4 2-1/4 / Trim 3 Standard 35 15 2-9/16 141 64 BVA3V1S500 BVK300S001NC38 VAM EIS 5 2-1/4 / Trim 3 Standard 35 15 2-9/16 159 72 BVA3V1S501 BVK300S001NC38 VAM EIS 5-1/4 2-1/4 / Trim 3 Standard 35 15 2-9/16 179 81 BVA3V1S502 BVK300S001NC40 VAM EIS 5 2-1/4 / Trim 3 Standard 35 15 2-5/8 159 72 BVA3V2S500 BVK300S001

VAM Express VX38 4-7/8 2-1/4 / Trim 3 Standard 35 15 2-11/16 150 68 BVA3A2S500 BVK300S001VAM Express VX39 4-7/8 2-1/4 / Trim 3 Standard 35 15 2-13/16 150 68 BVA3A0S500 BVK300S001VAM Express VX39 5 2-1/4 / Trim 3 Standard 35 15 2-13/16 159 72 BVA3A0S501 BVK300S001VAM Express VX40 5 2-1/4 / Trim 3 Standard 35 15 3 159 72 BVA3A3S500 BVK300S001VAM Express VX40 5-1/4 2-1/4 / Trim 3 Standard 35 15 3 179 81 BVA3A3S501 BVK300S001

NC38 4-3/4 2-1/4 / Trim 3 H2S Trim 33 10 W/O 134 61 BVA3N5T001 BVK300S001NC38 5 2-1/4 / Trim 3 H2S Trim 33 10 W/O 157 71 BVA3N5T002 BVK300S001NC38 5-1/4 2-1/4 / Trim 3 H2S Trim 33 10 W/O 170 77 BVA3N5T104 BVK300S001

NC38 VAM EIS 4-3/4 2-1/4 / Trim 3 H2S Trim 35 10 2-9/16 141 64 BVA3V1T500 BVK300S001NC38 VAM EIS 5 2-1/4 / Trim 3 H2S Trim 35 10 2-9/16 18 8 BVA3V1T501 BVK300S001NC38 VAM EIS 5-1/4 2-1/4 / Trim 3 H2S Trim 35 10 2-9/16 179 81 BVA3V1T502 BVK300S001NC40 VAM EIS 5 2-1/4 / Trim 3 H2S Trim 35 10 2-5/8 159 72 BVA3V2T500 BVK300S001

VAM Express VX38 4-7/8 2-1/4 / Trim 3 H2S Trim 35 10 2-11/16 150 68 BVA3A2T500 BVK300S001VAM Express VX39 4-7/8 2-1/4 / Trim 3 H2S Trim 35 10 2-13/16 150 68 BVA3A0T500 BVK300S001VAM Express VX39 5 2-1/4 / Trim 3 H2S Trim 35 10 2-13/16 159 72 BVA3A0T501 BVK300S001VAM Express VX40 5 2-1/4 / Trim 3 H2S Trim 35 10 3 159 72 BVA3A3T500 BVK300S001VAM Express VX40 5-1/4 2-1/4 / Trim 3 H2S Trim 35 10 3 179 81 BVA3A3T501 BVK300S001

I-BOP – Trim 3

15


5 1/2 FH 7 2-13/16 / Trim 4 Standard 37 15 W/O 340 154 BVA4F4S001 BVK400S0015 1/2 FH 7-1/4 2-13/16 / Trim 4 Standard 37 15 W/O 368 167 BVA4F4S111 BVK400S0015 1/2 FH 7-1/2 2-13/16 / Trim 4 Standard 37 15 W/O 401 182 BVA4F4S101 BVK400S001

5 1/2 FH VAM EIS 6-3/4 2-13/16 / Trim 4 Standard 37 15 4 284 129 BVA4V6S500 BVK400S0015 1/2 FH VAM EIS 7 2-13/16 / Trim 4 Standard 37 15 4 340 154 BVA4V6S501 BVK400S0015 1/2 FH VAM EIS 7-1/4 2-13/16 / Trim 4 Standard 37 15 4 368 167 BVA4V6S502 BVK400S0015 1/2 FH VAM EIS 7-1/2 2-13/16 / Trim 4 Standard 37 15 4 401 182 BVA4V6S503 BVK400S0015 1/2 FH VAM EIS 7-3/4 2-13/16 / Trim 4 Standard 37 15 4 430 195 BVA4V6S504 BVK400S001

6 5/8 FH 8 2-13/16 / Trim 4 Standard 41 15 W/O 520 236 BVA4F5S001 BVK400S0016 5/8 FH VAM EIS 7-3/4 2-13/16 / Trim 4 Standard 41 15 4-1/2 485 220 BVA4V7S500 BVK400S0016 5/8 FH VAM EIS 8 2-13/16 / Trim 4 Standard 41 15 4-1/2 520 236 BVA4V7S501 BVK400S001

NC46 6-1/4 2-13/16 / Trim 4 Standard 36 15 W/O 240 109 BVA4N8S001 BVK400S001NC46 6-3/8 2-13/16 / Trim 4 Standard 36 15 W/O 254 115 BVA4N8S100 BVK400S001

NC46 VAM EIS 6-1/4 2-13/16 / Trim 4 Standard 36 15 3 240 109 BVA4V3S500 BVK400S001NC50 6-1/2 2-13/16 / Trim 4 Standard 36 15 W/O 269 122 BVA4N9S001 BVK400S001NC50 6-5/8 2-13/16 / Trim 4 Standard 36 15 W/O 278 126 BVA4N9S123 BVK400S001NC50 6-3/4 2-13/16 / Trim 4 Standard 36 15 W/O 282 128 BVA4N9S124 BVK400S001

NC50 VAM EIS 6-1/2 2-13/16 / Trim 4 Standard 37 15 3-1/4 276 125 BVA4V4S500 BVK400S001NC50 VAM EIS 6-5/8 2-13/16 / Trim 4 Standard 37 15 3-1/4 280 127 BVA4V4S501 BVK400S001NC50 VAM EIS 6-3/4 2-13/16 / Trim 4 Standard 37 15 3-1/4 284 129 BVA4V4S502 BVK400S001

VAM Express VX46 6-1/4 2-13/16 / Trim 4 Standard 39 15 3-3/4 249 113 BVA4A4S500 BVK400S001VAM Express VX46 6-1/2 2-13/16 / Trim 4 Standard 39 15 3-3/4 287 130 BVA4A4S501 BVK400S001VAM Express VX50 6-1/2 2-13/16 / Trim 4 Standard 39 15 3-3/4 287 130 BVA4A5S500 BVK400S001VAM Express VX50 6-5/8 2-13/16 / Trim 4 Standard 39 15 3-3/4 291 132 BVA4A5S501 BVK400S001VAM Express VX50 6-3/4 2-13/16 / Trim 4 Standard 39 15 3-3/4 304 138 BVA4A5S502 BVK400S001VAM Express VX54 6-5/8 2-13/16 / Trim 4 Standard 39 15 4 291 132 BVA4A7S500 BVK400S001VAM Express VX54 6-3/4 2-13/16 / Trim 4 Standard 39 15 4 304 138 BVA4A7S501 BVK400S001VAM Express VX57 7 2-13/16 / Trim 4 Standard 41 15 4-1/2 384 174 BVA4A6S500 BVK400S001VAM Express VX57 7-1/4 2-13/16 / Trim 4 Standard 41 15 4-1/2 417 189 BVA4A6S501 BVK400S001VAM Express VX65 8 2-13/16 / Trim 4 Standard 43 15 5 545 247 BVA4A8S500 BVK400S001

5 1/2 FH 7 2-13/16 / Trim 4 H2S Trim 37 10 W/O 340 154 BVA4F4T001 BVK400S0015 1/2 FH 7-1/4 2-13/16 / Trim 4 H2S Trim 37 10 W/O 368 167 BVA4F4T104 BVK400S0015 1/2 FH 7-1/2 2-13/16 / Trim 4 H2S Trim 37 10 W/O 401 182 BVA4F4T105 BVK400S001

5 1/2 FH VAM EIS 6-3/4 2-13/16 / Trim 4 H2S Trim 37 10 4 284 129 BVA4V6T500 BVK400S0015 1/2 FH VAM EIS 7 2-13/16 / Trim 4 H2S Trim 37 10 4 340 154 BVA4V6T501 BVK400S0015 1/2 FH VAM EIS 7-1/4 2-13/16 / Trim 4 H2S Trim 37 10 4 368 167 BVA4V6T502 BVK400S0015 1/2 FH VAM EIS 7-1/2 2-13/16 / Trim 4 H2S Trim 37 10 4 401 182 BVA4V6T503 BVK400S0015 1/2 FH VAM EIS 7-3/4 2-13/16 / Trim 4 H2S Trim 37 10 4 430 195 BVA4V6T504 BVK400S001

6 5/8 FH 8 2-13/16 / Trim 4 H2S Trim 41 10 W/O 520 236 BVA4F5T001 BVK400S0016 5/8 FH VAM EIS 7-3/4 2-13/16 / Trim 4 H2S Trim 41 10 4-1/2 485 220 BVA4V7T500 BVK400S0016 5/8 FH VAM EIS 8 2-13/16 / Trim 4 H2S Trim 41 10 4-1/2 520 236 BVA4V7T501 BVK400S001

NC46 6-1/4 2-13/16 / Trim 4 H2S Trim 36 10 W/O 240 109 BVA4N8T001 BVK400S001NC46 6-3/8 2-13/16 / Trim 4 H2S Trim 36 10 W/O 254 115 BVA4N8T100 BVK400S001

NC46 VAM EIS 6-1/4 2-13/16 / Trim 4 H2S Trim 36 10 3 240 109 BVA4V3T500 BVK400S001NC50 6-1/2 2-13/16 / Trim 4 H2S Trim 36 10 W/O 269 122 BVA4N9T001 BVK400S001NC50 6-5/8 2-13/16 / Trim 4 H2S Trim 36 10 W/O 278 126 BVA4N9T107 BVK400S001NC50 6-3/4 2-13/16 / Trim 4 H2S Trim 36 10 W/O 282 128 BVA4N9T108 BVK400S001

NC50 VAM EIS 6-1/2 2-13/16 / Trim 4 H2S Trim 37 10 3-1/4 276 125 BVA4V4T500 BVK400S001NC50 VAM EIS 6-5/8 2-13/16 / Trim 4 H2S Trim 37 10 3-1/4 280 127 BVA4V4T501 BVK400S001NC50 VAM EIS 6-3/4 2-13/16 / Trim 4 H2S Trim 37 10 3-1/4 284 129 BVA4V4T502 BVK400S001

VAM Express VX46 6-1/4 2-13/16 / Trim 4 H2S Trim 39 10 3-3/4 249 113 BVA4A4T500 BVK400S001VAM Express VX46 6-1/2 2-13/16 / Trim 4 H2S Trim 39 10 3-3/4 287 130 BVA4A4T501 BVK400S001VAM Express VX50 6-1/2 2-13/16 / Trim 4 H2S Trim 39 10 3-3/4 287 130 BVA4A5T500 BVK400S001VAM Express VX50 6-5/8 2-13/16 / Trim 4 H2S Trim 39 10 3-3/4 291 132 BVA4A5T501 BVK400S001VAM Express VX50 6-3/4 2-13/16 / Trim 4 H2S Trim 39 10 3-3/4 304 138 BVA4A5T502 BVK400S001VAM Express VX54 6-5/8 2-13/16 / Trim 4 H2S Trim 39 10 4 291 132 BVA4A7T500 BVK400S001VAM Express VX54 6-3/4 2-13/16 / Trim 4 H2S Trim 39 10 4 304 138 BVA4A7T501 BVK400S001VAM Express VX57 7 2-13/16 / Trim 4 H2S Trim 41 15 4-1/2 384 174 BVA4A6T500 BVK400S001VAM Express VX57 7-1/4 2-13/16 / Trim 4 H2S Trim 41 15 4-1/2 417 189 BVA4A6T501 BVK400S001VAM Express VX65 8 2-13/16 / Trim 4 H2S Trim 43 10 5 545 247 BVA4A8T500 BVK400S001

I-BOP – Trim 4

16

Connection Landing Sub Check Valve OD / ID / Series / Landing Sub ID Service Pressure Sh to Sh Reboring Construction Approximate Approximate Part NumberOD Length Connection Weight [lbs] Weight [kg]

NC26 3-3/8 1-9/32 / 3/8 / 901 / 1-5/38 Standard 15 18 W/O 1 piece 42 19 RDA901S001NC26 VAM EIS 3-3/8 1-9/32 / 3/8 / 901 / 1-5/38 Standard 15 27 1-5/8 2 pieces 77 35 RDA901S502

NC31 4-1/8 1-9/32 / 3/8 / 901 / 1-5/38 Standard 15 18 W/O 1 piece 64 29 RDA901S002NC31 VAM EIS 3-7/8 1-9/32 / 3/8 / 901 / 1-5/38 Standard 15 27 2 2 pieces 88 40 RDA901S505

VAM Express VX24 3-1/8 1-9/32 / 3/8 / 901 / 1-5/38 Standard 15 27 1-1/2 2 pieces 71 32 RDA901S501VAM Express VX26 3-1/2 1-9/32 / 3/8 / 901 / 1-5/38 Standard 15 27 1-1/2 2 pieces 79 36 RDA901S503VAM Express VX28 3-5/8 1-9/32 / 3/8 / 901 / 1-5/38 Standard 15 27 2 2 pieces 84 38 RDA901S504VAM Express VX31 4-1/8 1-9/32 / 3/8 / 901 / 1-5/38 Standard 15 27 2 2 pieces 99 45 RDA901S506

NC26 3-3/8 1-9/32 / 3/8 / 901 / 1-5/38 H2S Trim 10 18 W/O 1 piece 64 29 RDA901T001NC26 VAM EIS 3-3/8 1-9/32 / 3/8 / 901 / 1-5/38 H2S Trim 10 27 1-5/8 2 pieces 77 35 RDA901T502

NC31 4-1/8 1-9/32 / 3/8 / 901 / 1-5/38 H2S Trim 10 18 W/O 1 piece 64 29 RDA901T002NC31 VAM EIS 3-7/8 1-9/32 / 3/8 / 901 / 1-5/38 H2S Trim 10 27 2 2 pieces 90 41 RDA901T505

VAM Express VX24 3-1/8 1-9/32 / 3/8 / 901 / 1-5/38 H2S Trim 10 27 1-1/2 2 pieces 71 32 RDA901T501VAM Express VX26 3-1/2 1-9/32 / 3/8 / 901 / 1-5/38 H2S Trim 10 27 1-1/2 2 pieces 79 36 RDA901T503VAM Express VX28 3-5/8 1-9/32 / 3/8 / 901 / 1-5/38 H2S Trim 10 27 2 2 pieces 84 38 RDA901T504VAM Express VX31 4-1/8 1-9/32 / 3/8 / 901 / 1-5/38 H2S Trim 10 27 2 2 pieces 99 45 RDA901T506

RDCV – Series 901


NC31 4-1/8 1-25/32 / 5/8 / 902 / 1-29/64 Standard 15 19 W/O 1 piece 62 28 RDA902S001NC38 4-3/4 1-25/32 / 5/8 / 902 / 1-29/64 Standard 15 19 W/O 1 piece 88 40 RDA902S002NC38 5 1-25/32 / 5/8 / 902 / 1-29/64 Standard 15 19 W/O 1 piece 97 44 RDA902S113

NC38 VAM EIS 4-3/4 1-25/32 / 5/8 / 902 / 1-29/64 Standard 15 27 2-9/16 2 pieces 112 51 RDA902S501NC38 VAM EIS 5 1-25/32 / 5/8 / 902 / 1-29/64 Standard 15 27 2-9/16 2 pieces 128 58 RDA902S503

VAM Express VX38 4-3/4 1-25/32 / 5/8 / 902 / 1-29/64 Standard 15 27 2-11/16 2 pieces 112 51 RDA902S502VAM Express VX39 5 1-25/32 / 5/8 / 902 / 1-29/64 Standard 15 27 2-13/16 2 pieces 128 58 RDA902S504VAM Express VX40 5 1-25/32 / 5/8 / 902 / 1-29/64 Standard 15 28 3 2 pieces 132 60 RDA902S505

NC31 4-1/8 1-25/32 / 5/8 / 902 / 1-29/64 H2S Trim 10 19 W/O 1 piece 62 28 RDA902T001NC38 4-3/4 1-25/32 / 5/8 / 902 / 1-29/64 H2S Trim 10 19 W/O 1 piece 88 40 RDA902T002NC38 5 1-25/32 / 5/8 / 902 / 1-29/64 H2S Trim 10 19 W/O 1 piece 97 44 RDA902T105

NC38 VAM EIS 4-3/4 1-25/32 / 5/8 / 902 / 1-29/64 H2S Trim 10 27 2-9/16 2 pieces 112 51 RDA902T501NC38 VAM EIS 5 1-25/32 / 5/8 / 902 / 1-29/64 H2S Trim 10 27 2-9/16 2 pieces 128 58 RDA902T503

VAM Express VX38 4-3/4 1-25/32 / 5/8 / 902 / 1-29/64 H2S Trim 10 27 2-11/16 2 pieces 112 51 RDA902T502VAM Express VX39 5 1-25/32 / 5/8 / 902 / 1-29/64 H2S Trim 10 27 2-13/16 2 pieces 128 58 RDA902T504VAM Express VX40 5 1-25/32 / 5/8 / 902 / 1-29/64 H2S Trim 10 28 3 2 pieces 132 60 RDA902T505

RDCV – Series 902


NC38 4-3/4 2-5/32 / 3/4 / 903 / 1-27/32 Standard 15 22 W/O 1 piece 93 42 RDA903S001NC38 5 2-5/32 / 3/4 / 903 / 1-27/32 Standard 15 22 W/O 1 piece 104 47 RDA903S002

NC38 VAM EIS 5 2-5/32 / 3/4 / 903 / 1-27/32 Standard 15 29 2-9/16 2 pieces 134 61 RDA903S502NC40 VAM EIS 5 2-5/32 / 3/4 / 903 / 1-27/32 Standard 15 29 2-5/8 2 pieces 134 61 RDA903S503

VAM Express VX38 4-3/4 2-5/32 / 3/4 / 903 / 1-27/32 Standard 15 29 2-11/16 2 pieces 119 54 RDA903S501VAM Express VX39 5 2-5/32 / 3/4 / 903 / 1-27/32 Standard 15 29 2-13/16 2 pieces 134 61 RDA903S504VAM Express VX40 5 2-5/32 / 3/4 / 903 / 1-27/32 Standard 15 29 3 2 pieces 134 61 RDA903S505

NC38 4-3/4 2-5/32 / 3/4 / 903 / 1-27/32 H2S Trim 10 22 W/O 1 piece 93 42 RDA903T001NC38 5 2-5/32 / 3/4 / 903 / 1-27/32 H2S Trim 10 22 W/O 1 piece 104 47 RDA903T002

NC38 VAM EIS 5 2-5/32 / 3/4 / 903 / 1-27/32 H2S Trim 10 29 2-9/16 2 pieces 134 61 RDA903T502NC40 VAM EIS 5 2-5/32 / 3/4 / 903 / 1-27/32 H2S Trim 10 29 2-5/8 2 pieces 134 61 RDA903T503

VAM Express VX38 4-3/4 2-5/32 / 3/4 / 903 / 1-27/32 H2S Trim 10 29 2-11/16 2 pieces 119 54 RDA903T501VAM Express VX39 5 2-5/32 / 3/4 / 903 / 1-27/32 H2S Trim 10 29 2-13/16 2 pieces 134 61 RDA903T504VAM Express VX40 5 2-5/32 / 3/4 / 903 / 1-27/32 H2S Trim 10 29 3 2 pieces 134 61 RDA903T505

RDCV – Series 903


NC38 VAM EIS 5 2-15/64 / 7/8 / 904 / 2-11/64 Standard 15 31 2-9/16 2 pieces 148 67 RDA904S501NC40 VAM EIS 5-1/4 2-15/64 / 7/8 / 904 / 2-11/64 Standard 15 31 2-5/8 2 pieces 165 75 RDA904S502

NC46 6 2-15/64 / 7/8 / 904 / 2-11/64 Standard 15 24 W/O 1 piece 170 77 RDA904S002NC50 6-5/8 2-15/64 / 7/8 / 904 / 2-11/64 Standard 15 24 W/O 1 piece 212 96 RDA904S112

VAM Express VX40 5-1/4 2-15/64 / 7/8 / 904 / 2-11/64 Standard 15 31 3 2 pieces 165 75 RDA904S503

RDCV – Series 904

17


NC38 VAM EIS 5 2-15/64 / 7/8 / 904 / 2-11/64 H2S Trim 10 31 2-9/16 2 pieces 148 67 RDA904T501NC40 VAM EIS 5-1/4 2-15/64 / 7/8 / 904 / 2-11/64 H2S Trim 10 31 2-5/8 2 pieces 165 75 RDA904T502

NC46 6 2-15/64 / 7/8 / 904 / 2-11/64 H2S Trim 10 24 W/O 1 piece 170 77 RDA904T002NC50 6-5/8 2-15/64 / 7/8 / 904 / 2-11/64 H2S Trim 10 24 W/O 1 piece 212 96 RDA904T101

VAM Express VX40 5-1/4 2-15/64 / 7/8 / 904 / 2-11/64 H2S Trim 10 31 3 2 pieces 165 75 RDA904T503

RDCV – Series 904 (continued)


5 1/2 FH 7 2-15/32 / 2-17/32 / 905 / 2-1/8 Standard 15 24 W/O 1 piece 236 107 RDA905S1275 1/2 FH VAM EIS 7 2-15/32 / 2-17/32 / 905 / 2-1/8 Standard 15 24 4 1 piece 236 107 RDA905S507

NC46 6 2-15/32 / 2-17/32 / 905 / 2-1/8 Standard 15 24 W/O 1 piece 165 75 RDA905S001NC46 VAM EIS 6-1/4 2-15/32 / 2-17/32 / 905 / 2-1/8 Standard 15 30 3 2 pieces 181 82 RDA905S501

NC50 6-1/2 2-15/32 / 2-17/32 / 905 / 2-1/8 Standard 15 24 W/O 1 piece 198 90 RDA905S002NC50 6-5/8 2-15/32 / 2-17/32 / 905 / 2-1/8 Standard 15 24 W/O 1 piece 207 94 RDA905S103

NC50 VAM EIS 6-1/2 2-15/32 / 2-17/32 / 905 / 2-1/8 Standard 15 24 3-1/4 1 piece 198 90 RDA905S503VAM Express VX46 6-1/4 2-15/32 / 2-17/32 / 905 / 2-1/8 Standard 15 24 3-3/4 1 piece 181 82 RDA905S502VAM Express VX50 6-1/2 2-15/32 / 2-17/32 / 905 / 2-1/8 Standard 15 24 3-3/4 1 piece 198 90 RDA905S504VAM Express VX50 6-5/8 2-15/32 / 2-17/32 / 905 / 2-1/8 Standard 15 24 3-3/4 1 piece 198 90 RDA905S505VAM Express VX54 6-5/8 2-15/32 / 2-17/32 / 905 / 2-1/8 Standard 15 24 4 1 piece 207 94 RDA905S506VAM Express VX57 7 2-15/32 / 2-17/32 / 905 / 2-1/8 Standard 15 24 4-1/2 1 piece 236 107 RDA905S508

5 1/2 FH 7 2-15/32 / 2-17/32 / 905 / 2-1/8 H2S Trim 10 24 W/O 1 piece 236 107 RDA905T1085 1/2 FH VAM EIS 7 2-15/32 / 2-17/32 / 905 / 2-1/8 H2S Trim 10 24 4 1 piece 236 107 RDA905T507

NC46 6 2-15/32 / 2-17/32 / 905 / 2-1/8 H2S Trim 10 24 W/O 1 piece 165 75 RDA905T001NC46 VAM EIS 6-1/4 2-15/32 / 2-17/32 / 905 / 2-1/8 H2S Trim 10 30 3 2 pieces 181 82 RDA905T501

NC50 6-1/2 2-15/32 / 2-17/32 / 905 / 2-1/8 H2S Trim 10 24 W/O 1 piece 198 90 RDA905T002NC50 6-5/8 2-15/32 / 2-17/32 / 905 / 2-1/8 H2S Trim 10 24 W/O 1 piece 207 94 RDA905T100

NC50 VAM EIS 6-1/2 2-15/32 / 2-17/32 / 905 / 2-1/8 H2S Trim 10 24 3-1/4 1 piece 198 90 RDA905T503VAM Express VX46 6-1/4 2-15/32 / 2-17/32 / 905 / 2-1/8 H2S Trim 10 24 3-3/4 1 piece 181 82 RDA905T502VAM Express VX50 6-1/2 2-15/32 / 2-17/32 / 905 / 2-1/8 H2S Trim 10 24 3-3/4 1 piece 198 90 RDA905T504VAM Express VX50 6-5/8 2-15/32 / 2-17/32 / 905 / 2-1/8 H2S Trim 10 24 3-3/4 1 piece 198 90 RDA905T505VAM Express VX54 6-5/8 2-15/32 / 2-17/32 / 905 / 2-1/8 H2S Trim 10 24 4 1 piece 207 94 RDA905T506VAM Express VX57 7 2-15/32 / 2-17/32 / 905 / 2-1/8 H2S Trim 10 24 4-1/2 1 piece 236 107 RDA905T508

RDCV – Series 905


5-1/2 FH 7 2-27/32 / 1-3/8 / 906 / 2-33/64 Standard 15 25 W/O 1 piece 238 108 RDA906S1045-1/2 FH 7-1/4 2-27/32 / 1-3/8 / 906 / 2-33/64 Standard 15 25 W/O 1 piece 258 117 RDA906S1145-1/2 FH 7-1/2 2-27/32 / 1-3/8 / 906 / 2-33/64 Standard 15 25 W/O 1 piece 278 126 RDA906S1225-1/2 FH 7-3/4 2-27/32 / 1-3/8 / 906 / 2-33/64 Standard 15 25 W/O 1 piece 300 136 RDA906S136

5-1/2 FH VAM EIS 7 2-27/32 / 1-3/8 / 906 / 2-33/64 Standard 15 25 4 1 piece 238 108 RDA906S5035-1/2 FH VAM EIS 7-1/4 2-27/32 / 1-3/8 / 906 / 2-33/64 Standard 15 25 4 1 piece 258 117 RDA906S505

6-5/8 FH 8 2-27/32 / 1-3/8 / 906 / 2-33/64 Standard 15 25 W/O 1 piece 320 145 RDA906S1006-5/8 FH VAM EIS 8 2-27/32 / 1-3/8 / 906 / 2-33/64 Standard 15 25 4-1/2 1 piece 320 145 RDA906S507

6-5/8 REG 8 2-27/32 / 1-3/8 / 906 / 2-33/64 Standard 15 25 W/O 1 piece 320 145 RDA906S002NC50 6-1/2 2-27/32 / 1-3/8 / 906 / 2-33/64 Standard 15 25 W/O 1 piece 198 90 RDA906S001NC50 6-5/8 2-27/32 / 1-3/8 / 906 / 2-33/64 Standard 15 25 W/O 1 piece 212 96 RDA906S102

VAM Express VX50 6-1/2 2-27/32 / 1-3/8 / 906 / 2-33/64 Standard 15 25 3-3/4 1 piece 198 90 RDA906S501VAM Express VX50 6-5/8 2-27/32 / 1-3/8 / 906 / 2-33/64 Standard 15 25 3-3/4 1 piece 198 90 RDA906S502VAM Express VX57 7 2-27/32 / 1-3/8 / 906 / 2-33/64 Standard 15 25 4-1/2 1 piece 238 108 RDA906S504VAM Express VX57 7-1/4 2-27/32 / 1-3/8 / 906 / 2-33/64 Standard 15 25 4-1/2 1 piece 258 117 RDA906S506VAM Express VX65 8 2-27/32 / 1-3/8 / 906 / 2-33/64 Standard 15 25 5 1 piece 320 145 RDA906S508

5-1/2 FH 7 2-27/32 / 1-3/8 / 906 / 2-33/64 H2S Trim 10 25 W/O 1 piece 238 108 RDA906T1155-1/2 FH 7-1/4 2-27/32 / 1-3/8 / 906 / 2-33/64 H2S Trim 10 25 W/O 1 piece 258 117 RDA906T1005-1/2 FH 7-1/2 2-27/32 / 1-3/8 / 906 / 2-33/64 H2S Trim 10 25 W/O 1 piece 278 126 RDA906T1165-1/2 FH 7-3/4 2-27/32 / 1-3/8 / 906 / 2-33/64 H2S Trim 10 25 W/O 1 piece 300 136 RDA906T117

5-1/2 FH VAM EIS 7 2-27/32 / 1-3/8 / 906 / 2-33/64 H2S Trim 10 25 4 1 piece 238 108 RDA906T5035-1/2 FH VAM EIS 7-1/4 2-27/32 / 1-3/8 / 906 / 2-33/64 H2S Trim 10 25 4 1 piece 258 117 RDA906T505

6-5/8 FH 8 2-27/32 / 1-3/8 / 906 / 2-33/64 H2S Trim 10 25 W/O 1 piece 320 145 RDA906T1016-5/8 FH VAM EIS 8 2-27/32 / 1-3/8 / 906 / 2-33/64 H2S Trim 10 25 4-1/2 1 piece 320 145 RDA906T507

6-5/8 REG 8 2-27/32 / 1-3/8 / 906 / 2-33/64 H2S Trim 10 25 W/O 1 piece 320 145 RDA906T002NC50 6-1/2 2-27/32 / 1-3/8 / 906 / 2-33/64 H2S Trim 10 25 W/O 1 piece 198 90 RDA906T001NC50 6-5/8 2-27/32 / 1-3/8 / 906 / 2-33/64 H2S Trim 10 25 W/O 1 piece 212 96 RDA906T107

VAM Express VX50 6-1/2 2-27/32 / 1-3/8 / 906 / 2-33/64 H2S Trim 10 25 3-3/4 1 piece 198 90 RDA906T501VAM Express VX50 6-5/8 2-27/32 / 1-3/8 / 906 / 2-33/64 H2S Trim 10 25 3-3/4 1 piece 198 90 RDA906T502VAM Express VX57 7 2-27/32 / 1-3/8 / 906 / 2-33/64 H2S Trim 10 25 4-1/2 1 piece 238 108 RDA906T504VAM Express VX57 7-1/4 2-27/32 / 1-3/8 / 906 / 2-33/64 H2S Trim 10 25 4-1/2 1 piece 258 117 RDA906T506VAM Express VX65 8 2-27/32 / 1-3/8 / 906 / 2-33/64 H2S Trim 10 25 5 1 piece 320 145 RDA906T508

RDCV – Series 906

18


5 1/2 FH 7 3-3/64 / 1-9/16 / 907 / 2-11/16 Standard 15 26 W/O 1 piece 247 112 RDA907S1015 1/2 FH 7-1/4 3-3/64 / 1-9/16 / 907 / 2-11/16 Standard 15 26 W/O 1 piece 265 120 RDA907S117

5 1/2 FH VAM EIS 7 3-3/64 / 1-9/16 / 907 / 2-11/16 Standard 15 31 3-1/2 2 pieces 247 112 RDA907S5046 5/8 FH 8 3-3/64 / 1-9/16 / 907 / 2-11/16 Standard 15 26 W/O 1 piece 333 151 RDA907S105

6 5/8 FH VAM EIS 8 3-3/64 / 1-9/16 / 907 / 2-11/16 Standard 15 26 4-1/2 1 piece 333 151 RDA907S5066 5/8 REG 8 3-3/64 / 1-9/16 / 907 / 2-11/16 Standard 15 26 W/O 1 piece 333 151 RDA907S002NC50 6-1/2 3-3/64 / 1-9/16 / 907 / 2-11/16 Standard 15 26 W/O 1 piece 203 92 RDA907S001NC50 6-5/8 3-3/64 / 1-9/16 / 907 / 2-11/16 Standard 15 26 W/O 1 piece 212 96 RDA907S116

NC50 VAM EIS 6-1/2 3-3/64 / 1-9/16 / 907 / 2-11/16 Standard 15 31 3-1/4 2 pieces 203 92 RDA907S501NC50 VAM EIS 6-5/8 3-3/64 / 1-9/16 / 907 / 2-11/16 Standard 15 31 3-1/4 2 pieces 212 96 RDA907S502

VAM Express VX54 6-5/8 3-3/64 / 1-9/16 / 907 / 2-11/16 Standard 15 31 4 2 pieces 212 96 RDA907S503VAM Express VX57 7 3-3/64 / 1-9/16 / 907 / 2-11/16 Standard 15 26 4-1/2 1 piece 247 112 RDA907S505VAM Express VX65 8 3-3/64 / 1-9/16 / 907 / 2-11/16 Standard 15 26 5 1 piece 333 151 RDA907S507

5 1/2 FH 7 3-3/64 / 1-9/16 / 907 / 2-11/16 H2S Trim 10 26 W/O 1 piece 247 112 RDA907T1045 1/2 FH 7-1/4 3-3/64 / 1-9/16 / 907 / 2-11/16 H2S Trim 10 26 W/O 1 piece 265 120 RDA907T105

5 1/2 FH VAM EIS 7 3-3/64 / 1-9/16 / 907 / 2-11/16 H2S Trim 10 31 3-1/2 2 pieces 247 112 RDA907T5046 5/8 FH 8 3-3/64 / 1-9/16 / 907 / 2-11/16 H2S Trim 10 26 W/O 1 piece 333 151 RDA907T106

6 5/8 FH VAM EIS 8 3-3/64 / 1-9/16 / 907 / 2-11/16 H2S Trim 10 26 4-1/2 1 piece 333 151 RDA907T5066 5/8 REG 8 3-3/64 / 1-9/16 / 907 / 2-11/16 H2S Trim 10 26 W/O 1 piece 333 151 RDA907T002NC50 6-1/2 3-3/64 / 1-9/16 / 907 / 2-11/16 H2S Trim 10 26 W/O 1 piece 203 92 RDA907T001NC50 6-5/8 3-3/64 / 1-9/16 / 907 / 2-11/16 H2S Trim 10 26 W/O 1 piece 212 96 RDA907T103

NC50 VAM EIS 6-1/2 3-3/64 / 1-9/16 / 907 / 2-11/16 H2S Trim 10 31 3-1/4 2 pieces 203 92 RDA907T501NC50 VAM EIS 6-5/8 3-3/64 / 1-9/16 / 907 / 2-11/16 H2S Trim 10 31 3-1/4 2 pieces 212 96 RDA907T502

VAM Express VX54 6-5/8 3-3/64 / 1-9/16 / 907 / 2-11/16 H2S Trim 10 31 4 2 pieces 212 96 RDA907T503VAM Express VX57 7 3-3/64 / 1-9/16 / 907 / 2-11/16 H2S Trim 10 26 4-1/2 1 piece 247 112 RDA907T505VAM Express VX65 8 3-3/64 / 1-9/16 / 907 / 2-11/16 H2S Trim 10 26 5 1 piece 333 151 RDA907T507

RDCV – Series 907


5-1/2 FH 7 3-7/64 / 1-11/16 / 908 / 2-25/32 Standard 15 26 W/O 1 piece 245 111 RDA908S1025-1/2 FH 7-1/4 3-7/64 / 1-11/16 / 908 / 2-25/32 Standard 15 26 W/O 1 piece 265 120 RDA908S107

5-1/2 FH VAM EIS 7 3-7/64 / 1-11/16 / 908 / 2-25/32 Standard 15 32 3-1/2 2 pieces 245 111 RDA908S5015-1/2 FH VAM EIS 7-1/4 3-7/64 / 1-11/16 / 908 / 2-25/32 Standard 15 32 3-1/2 2 pieces 265 120 RDA908S503

6-5/8 FH 8 3-7/64 / 1-11/16 / 908 / 2-25/32 Standard 15 26 W/O 1 piece 331 150 RDA908S1036-5/8 FH 8-1/4 3-7/64 / 1-11/16 / 908 / 2-25/32 Standard 15 26 W/O 1 piece 355 161 RDA908S1146-5/8 FH 8-1/2 3-7/64 / 1-11/16 / 908 / 2-25/32 Standard 15 26 W/O 1 piece 377 171 RDA908S105

6-5/8 FH VAM EIS 8 3-7/64 / 1-11/16 / 908 / 2-25/32 Standard 15 26 4-1/2 1 piece 331 150 RDA908S5046-5/8 FH VAM EIS 8-1/2 3-7/64 / 1-11/16 / 908 / 2-25/32 Standard 15 26 4-1/2 1 piece 377 171 RDA908S507

6-5/8 REG 8 3-7/64 / 1-11/16 / 908 / 2-25/32 Standard 15 26 W/O 1 piece 331 150 RDA908S002VAM Express VX57 7 3-7/64 / 1-11/16 / 908 / 2-25/32 Standard 15 26 4-1/2 1 piece 245 111 RDA908S502VAM Express VX65 8 3-7/64 / 1-11/16 / 908 / 2-25/32 Standard 15 26 5 1 piece 331 150 RDA908S505VAM Express VX69 8-1/4 3-7/64 / 1-11/16 / 908 / 2-25/32 Standard 15 26 5-1/2 1 piece 355 161 RDA908S506

5-1/2 FH 7 3-7/64 / 1-11/16 / 908 / 2-25/32 H2S Trim 10 26 W/O 1 piece 245 111 RDA908T1035-1/2 FH 7-1/4 3-7/64 / 1-11/16 / 908 / 2-25/32 H2S Trim 10 26 W/O 1 piece 265 120 RDA908T104

5-1/2 FH VAM EIS 7 3-7/64 / 1-11/16 / 908 / 2-25/32 H2S Trim 10 32 3-1/2 2 pieces 245 111 RDA908T5015-1/2 FH VAM EIS 7-1/4 3-7/64 / 1-11/16 / 908 / 2-25/32 H2S Trim 10 32 3-1/2 2 pieces 265 120 RDA908T503

6-5/8 FH 8 3-7/64 / 1-11/16 / 908 / 2-25/32 H2S Trim 10 26 W/O 1 piece 331 150 RDA908T1006-5/8 FH 8-1/4 3-7/64 / 1-11/16 / 908 / 2-25/32 H2S Trim 10 26 W/O 1 piece 355 161 RDA908T1056-5/8 FH 8-1/2 3-7/64 / 1-11/16 / 908 / 2-25/32 H2S Trim 10 26 W/O 1 piece 377 171 RDA908T106

6-5/8 FH VAM EIS 8 3-7/64 / 1-11/16 / 908 / 2-25/32 H2S Trim 10 26 4-1/2 1 piece 331 150 RDA908T5046-5/8 FH VAM EIS 8-1/2 3-7/64 / 1-11/16 / 908 / 2-25/32 H2S Trim 10 26 4-1/2 1 piece 377 171 RDA908T507

6-5/8 REG 8 3-7/64 / 1-11/16 / 908 / 2-25/32 H2S Trim 10 26 W/O 1 piece 331 150 RDA908T002VAM Express VX57 7 3-7/64 / 1-11/16 / 908 / 2-25/32 H2S Trim 10 26 4-1/2 1 piece 245 111 RDA908T502VAM Express VX65 8 3-7/64 / 1-11/16 / 908 / 2-25/32 H2S Trim 10 26 5 1 piece 331 150 RDA908T505VAM Express VX69 8-1/4 3-7/64 / 1-11/16 / 908 / 2-25/32 H2S Trim 10 26 5-1/2 1 piece 355 161 RDA908T506

RDCV – Series 908

SALES & SERVICES OFFICES

AFRICA

Vallourec Drilling Products FrancePhone +33 1 41 03 78 [email protected]

CHINA

Vallourec (Beijing) Co. LtdPhone +86 10 5923 [email protected]

EUROPE

Vallourec Oil & Gas UK LtdPhone +44 1224 279 [email protected]

Vallourec Drilling Products FrancePhone +33 1 49 09 35 [email protected]

Vallourec Deutschland GmbHPhone +49 211 960 [email protected]

FAR EAST

Vallourec Asia Pacific Corp. Pte LtdPhone +65 6933 [email protected]

MIDDLE EAST

Vallourec Drilling Products Middle East FZEPhone +971 4 815 [email protected]

NORTH AMERICA

Client Support CenterPhone +1 713 479 [email protected]

Vallourec Drilling Products USAPhone +1 713 844 [email protected]

Vallourec Canada Inc.Phone +1 780 955 [email protected]

RUSSIA

Vallourec RUS LLCPhone +7 495 787 49 [email protected]

LATIN AMERICA

Vallourec Tubos do Brasil S.A.Phone +55 21 3873 83 [email protected]

Visit our Website www.vallourec.com/drilling-products

Leader in Drilling Solutions

2014 - For general information only ©Vallourec Drilling Products USA - All rights reserved.

safety valves brochure

Documents