RK-Series Rope Kit Hardware Contents Available Optional Hardware (can be ordered individually)

3.300"

M8 X 1.25

2.00"51mm

84mm

3.300"

M8 X 1.25

2.00"51mm

84mm

7.50" to 9.750"190mm to 248mm

7.50" to 9.750"190mm to 248mm

9.250"235mm

6.00" to 8.500"152mm to 216mm

PN 44506-4710Eye Bolt SS Quick Link

(only available with the RK-Series Rope Kitfor up to 50m rope span)

4mm Allen Wrench(only available with RK-Series Rope Kit)

Note: See table below for quantity for each RK-Series Rope Kit

ThimbleGalv: PN 44506-4771SS: PN 44506-4770

Double Loop ClipGalv: PN 44506-4721SS: PN 44506-4720

TurnbuckleGalv: PN44506-4731SS: PN 44506-4730

Tensioner Gripper SSPN 44506-4700

Tensioner Gripper SSPN 44506-4700

SpringGalv: PN 44506-0730

Double Loop Clip

Thimble

Step 1: wire rope enters Tensioner/Gripper hole 1.

Step 2: pass wire rope through hole 2.

Step 3: bring wire rope back through hole 3.

Step 4: loop wire rope and terminate into hole 4.

Step 5: Tighten Allen head screw with M4 allen key

Follow steps 1 through 5 in the illustration below to attachthe wire rope to the Tensioner Gripper Assembly.

The Double Loop Clilp is used to connect totensioning hardware or to terminate rope span.

Rope Pulley SSPN 44506-4780

ø 26

27

76.80

40

RK-Series Rope Tension Kits and Accessories

Safety, Technology & Innovation

Operating Instructions for Rope Tension Kits and Accessories

RK-Series Quick Link Eyebolt TensionGripper

Allen Wrench Part No.

RK5, 5m Rope Kit 1 3 1 44506-2705RK10, 10m Rope Kit 1 5 1RK15, 15m Rope Kit 1 7 1RK20, 20m Rope Kit 1 9 1RK30, 30m Rope Kit 1 12 1RK50, 50m Rope Kit 1 20 1RK80, 80m Rope Kit No 30 2RK100, 100m Rope Kit No 37 2RK126, 126m Rope Kit No 45 2

11 1111222

44506-271044506-271544506-272044506-273044506-275044506-278044506-271144506-2726

Eye BoltsGalv: PN 44506-0720SS: PN 44506-4710

SS: PN 44506-4750

Tension IndicatorIndicator shown with properlyadjusted tension.

every 3 meters 500mmMax

500mmMax every 3 meters

up to 30m Spring Tensioner Gripper

Tensioner GripperSpring

every 3 meters

up to 100m

every 3 meters

Spring Tensioner Gripper

500mmMax

500mmMax

500mmMax

500mmMax

RK-Series Rope Tension Kits and AccessoriesOperating Instructions for Rope Tension Kits and Accessories

every 3 meters 500mmMax

500mmMax every 3 meters

up to 50mTensioner Gripper Tensioner GripperER5018 ER5018 ER5018

every 3 meters 500mmMax

500mmMax every 3 meters

up to 60m Spring Tensioner Gripper

every 3 meters 500mmMax

500mmMax every 3 meters

up to 80mTensioner Gripper Tensioner GripperER6022 ER6022 ER6022

every 3 meters 500mmMax

500mmMax every 3 meters

up to 100mSpring Tensioner Gripper

every 3 meters 500mmMax

500mmMax every 3 meters

up to 125mTensioner Gripper Tensioner Gripper

ER1022 ER1022 ER1022

up to 100mER1032

Accessories Material Quantity PNSM06 -TK00, Tensioner Kit Stainless Steel Turnbuckle: 1

Rope Grips: 8Thimbles: 4

44506 -0700

SM06 -TG00, Tensioner Gripper Stainless Steel 1 44506 -4700SM06 -EB10, Eye Bolt Stainless Steel 8 44506 -4710SM06 -EB20, Eye Bolt Galvanized 1 44506 -0720SM06 -DL20, Double Loop Clip Stainless Steel 4 44506 -4720SM06 -DL21, Double Loop Clip Galvanized 4 44506 -4721SM06 -THSS, Thimble Stainless Steel 4 44506 -4770SM06 -THGV, Thimble Galvanized 4 44506 -4771SM06 -TB30, Turnbuckle Stainless Steel 1 44506 -4730SM06 -TB31, Turnbuckle Galvanized 1 44506 -4731SM06 -SP30, Spring Galvanized 1 44506 -0730SM06 -SP50, Spring Stainless Steel 1 44506 -4750SM06 -RPSS, Rope Pulley Stainless Steel 1 44506 -4780

Installation Guide1. Installation of all Safety Rope Switch systems must be in accordance with a risk assessment for the individual application. Installation must onlybe carried out by competent personnel and in accordance with these instructions. 2. Rope support eyebolts must be fitted at 2.5 m. min. to 3 m. max. intervals along all rope lengths between switches. The rope must be supported no morethan 500 mm from the switch eyebolt or Safety Spring (if used). It is important that this first 500 mm is not used as part of the active protection coverage.3. Tensioning of rope is achieved by use of tensioner / gripper assemblies. Typical operational conditions for successful operation of system is lessthan 75 N. pulling force and less than 150 mm deflection of rope between eyebolt supports. NOTE: For further detailed installation instructions and installation examples use the following link: www.sti.com/safety/index.htm (go to "Proper Installation of Rope or Wire Pull Switches”)

Recommended Rope Span Options and Fittings

OMRON SCIENTIFIC TECHNOLOGIES, INC.

©2013 Omron Scientific Technogies, Inc. All rights reserved. P/N 99466-0010 Rev.C

Safety, Technology & Innovation

OMRON CANADA, INC. • HEAD OFFICEToronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com

OMRON ELECTRONICS DE MEXICO • HEAD OFFICEMéxico DF • 52.55.59.01.43.00 • 01-800-226-6766 • mela@omron.com

OMRON ELECTRONICS DE MEXICO • SALES OFFICEApodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • mela@omron.com

OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICESão Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br

OMRON ARGENTINA • SALES OFFICECono Sur • 54.11.4783.5300

OMRON CHILE • SALES OFFICESantiago • 56.9.9917.3920

OTHER OMRON LATIN AMERICA SALES54.11.4783.5300

Authorized Distributor:

C322I-E-01 03/15 Note: Specifications are subject to change. © 2015 Omron Electronics LLC Printed in U.S.A.

Printed on recycled paper.

Automation Control Systems• Machine Automation Controllers (MAC) • Programmable Controllers (PLC) • Operator interfaces (HMI) • Distributed I/O • Software

Drives & Motion Controls • Servo & AC Drives • Motion Controllers & Encoders

Temperature & Process Controllers • Single and Multi-loop Controllers

Sensors & Vision• Proximity Sensors • Photoelectric Sensors • Fiber-Optic Sensors• Amplified Photomicrosensors • Measurement Sensors• Ultrasonic Sensors • Vision Sensors

Industrial Components • RFID/Code Readers • Relays • Pushbuttons & Indicators• Limit and Basic Switches • Timers • Counters • Metering Devices • Power Supplies

Safety • Laser Scanners • Safety Mats • Edges and Bumpers • Programmable Safety Controllers • Light Curtains • Safety Relays • Safety Interlock Switches

OMRON AUTOMATION AND SAFETY • THE AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com

OMRON EUROPE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • +31 (0) 23 568 13 00 • www.industrial.omron.eu