Wearable social distance monitor

S-Bridge

TABLE OF CONTENTS

1 SAFETY INSTRUCTIONS 3

1.1 Repair and modifications 3

2 OVERVIEW 4

3 WALL MOUNTING 5

4 INSTALLATION 6

5 CONNECTION AND DATA TRANSFER 7

6 COMMUNICATION 8

7 SPECS 10

S-Bridge 10

REGULATORY 11

2

1 SAFETY INSTRUCTIONSBefore using this product, carefully read this user manual. Failure to follow these safety instructions could result in fire, electric shock, injury, or damage to Safe Spacer or other property. Do not dispose of this manual. Ensure that this information is retained and used appropriately by the product user.• Users must fully understand and strictly observe the instructions. Use the product only for the purposes specified in this document.

Comply with all local and national rules and regulations associated with this product.• Users must be familiar with the relevant safety concepts of the industrial environment they are operating in, as well as applicable

standards and other regulations. Always obey site-specific signs and instructions.

RF EXPOSURE AND INTERFERENCES-Bridge uses radio signals to connect other devices. It is designed, tested, and manufactured to comply with regulations governing radio frequency emissions. Even so, radio-signal emitting devices can negatively affect the operation of other electronic equipment, causing them to malfunction.

POSSIBLE MEDICAL DEVICE INTERFERENCES-Bridge contains components that emit electromagnetic fields. This may interfere with medical devices, such as pacemakers and defibrillators. Consult your physician and medical device manufacturer for information specific to your medical device and whether you need to maintain a safe distance of separation between your medical device and S-Bridge.If you suspect S-Bridge is interfering with your medical device, stop using it immediately and consult your physician.

NOT FOR USE IN A POTENTIALLY EXPLOSIVE ENVIRONMENTUsing S-Bridge in any area with a potentially explosive atmosphere, such as areas where the air contains high levels of flammable chemicals, vapors, or particles (such as grain, dust, or metal powders), may be hazardous.Exposing S-Bridge to environments having high concentrations of industrial chemicals may damage or impair S-Bridge functionality.

1.1 REPAIR AND MODIFICATIONS• Only trained and competent personnel are permitted to inspect, repair and service S-Bridge.• Use only original parts and accessories for using and maintaining this product. Otherwise, the correct functioning of the product could be

impaired.

CAUTION: Modifications to any component of S-Bridge are not permitted, as they can endanger your safety or damage the device. Disassembling S-Bridge may cause damage, result in loss of water resistance, and may cause injury to the user.

EUROPEAN UNION—DISPOSAL INFORMATIONThe symbol above means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.

3

2 OVERVIEW

SCREW HOLE

MICRO-USB PORT TO IK141-101

MICRO-USB PORT

MICRO-USB PORT TO HOST

LED LIGHTS

4

3 WALL MOUNTING

• Mount the holder to the wall using the included screw and wall

anchor.

• Tighten the screw to fasten the holder to the wall.

5

4 INSTALLATION

• Insert the device (IK141-101) into the holder, paying attention to

the position of the Micro-USB connector.

6

5 CONNECTION AND DATA TRANSFER

• Plug the Micro-USB to USB-A cable to the Micro-USB port

located in the bottom side of the holder.

• Use the other end of the cable to connect the unit to computer...

• ...or IT infrastructure.

MICRO-USB PORT

7

6 COMMUNICATION

RED

BLUE

GREEN

• When the S-Bridge is connected to an host waiting for a connection with a Safe Spacer, its LED will turn green.

RED

BLUE

GREEN

• When a Safe Spacer is connected to the S-Bridge, both the units

are light up blue.

GREEN

GREEN BLUE

• Once the connection is terminated and the data are transferred

successfully, the Safe Spacer will blink green and a single vibration occurs. Then the Safe Spacer will restart and the lights will blink green/blue alternatively for 10 seconds.

• Once the connection is terminated and the data are transferred successfully, the S-Bridge will blink green.

8

RED

BLUE

GREEN

• If the connection is terminated with issues, both the Safe Spacer

and S-Bridge will blink red. If this occurs, try again until the connection will end successfully.

9

10

7 SPECS

S-Bridge

Wireless technology UWB - Channel 5, Bluetooth®Host connection and power through micro USB connectorOperation -20°C to 55°C, 0 % to 98 % relative humidityStorage -20°C to 55°C, 0 % to 98 % relative humidityCertification FCC, IC, CE, CE-REDCasing Material PA polyamideWall Holder Material PP PolypropyleneUSB cable Micro-USB male to USB-A male cable, 60 cm (included)Casing dimension 47 mm x 42 mm x 16 mmCasing weight 25 gWall holder dimension 90 mm x 90 mm x 26 mmWall holder weight 45gUsage indoor only

REGULATORY

USER’S MANUAL REVISION NOTE: 2020/10/15

Contains FCC ID: 2AQ33-DWM1001Contains IC: 23794-DWM1001

FCC statement

This device complies with Part 15.107 and 15.109 Class B of the FCC Rules CFR47: October 2010. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Power rating: 5V 130mA max (with USB connection)

This equipment may only be operated indoors. Operation outdoors is in violation of 47 U.S.C. 301 and could subject the operator to serious legal penalties.

P/N: IK141-102 (contains IK141-101)Model Nr.: IK141

S-Bridge

11