running magnet 2.0 surface - architectural.flosusa.com · page 1 of 7 for more information contact...
TRANSCRIPT
Fixture Type
Job Name
Running Magnet 2.0 SurfaceHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 1 of 7
For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 04.12.2018
Surface Profile
Trimless extruded aluminum profile to be surface mounted on ceilings
Linear profiles available as feed profiles toconnect to a driver and intermediate profilesto fill in remaining lengths.
Each feed profile comes with two end caps.
Available lengths: 39.4”, 59”, and 78.7”
All linear profiles are field cuttable.
Corners available for continuous runs.
Track can be powered through corners.
Corners are not field cuttable.
Description
Fun with magnets and light. Simultaneously graphic and subtle, the Running Magnet isflexible, precise, and as creative as you. It is track lighting redesigned and elegantly refined.Light elements snap in place and connect automatically though the magic of magnets.Extruded aluminum housings create a clean 1-3/8-inch slot and preconfigured cornerscomplete the system that can run up, around and across walls and ceilings. Finishes alignperfectly, always, because Running Magnet can be easily cut on site (except SuspensionUp&Down). Linear LED and accent fixtures, available in a variety of sizes, can be exchangedand repositioned quickly, without tools, with artistic results. The Running Magnet is perfectfor retail displays where frequent changes are typical and absolute performance is mandatory.
Lamps
Multi Spot: 10W, 4x210lm, 2700K, CRI 8010W, 4x210m, 3000K, CRI 80
Mini Glo-ball: 7W, 800lm, 2700K, CRI 807W, 880lm, 3000K, CRI 80
Mini Glo-Ball S:3.5W, 400lm, 2700K, CRI 803.5W, 440lm, 3000K, CRI 80
Find Me Suspension: 8W, 560lm, 2700K, CRI 908W, 600lm, 3000K, CRI 90
Spot Module:8W, 600lm, 3000K, CRI 908W, 550lm, 2700K, CRI 90
Light Strip, 11.8’’:7.5W, 460lm, 3000K, CRI 907.5W, 435lm, 2700K, CRI 90
Light Strip 23.6’’:15W, 920lm, 3000K, CRI 9015W, 870lm, 2700K, CRI 90
Light Strip 35.4’’:22.5W, 1380lm, 3000K, CRI 9022.5W, 1305lm, 2700K, CRI 90
Light Strip 47.2’’:30W, 1840lm, 3000K, CRI 9030W, 1740lm, 2700K, CRI 90
Spot 120:12.5W, 1060lm, 3000K, CRI9012.5W, 985lm, 2700K, CRI90
Construction
Extruded aluminum housing with integral DALI controllable track system.
Photometrics
For current IES files please visitarchitectural.flosusa.com
Electrical
24V electrical systemlimited to a maximumload of 4A and 100W per driver.
Spot and linear luminaires available withindividually addressable DALI circuitry,0-10V Dimming or built-in dimmer on eachfixture head.
EC to supply site cabling from driver to tracklocation and site UL listed enclosure.
Notes
Consult factory for other ceiling typesincluding accoustic tile ceilings and wood.
Listings: UL Listed, IP20 dry location only, Class 2, Meets California standards forcommercial interiors.
Warranty
2 years from date of sale.
UP & DOWNSUSPENSIONRECESSED SURFACE
Fixture Type
Job Name
Running Magnet 2.0 SurfaceHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 2 of 7
For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 04.12.2018
Profiles
Corners
The extruded aluminum housing creates a clean 1-3/8” slot that can be run up, around and across walls and ceilings. Vertical and horizontal corners complete thesystem. The magnetic luminaries are simply installed by insertion. Linear tracks are available in two versions: power feed profiles for connecting to a driver, andintermediate profiles. End caps and connection cables are included with each power feed profile. Internal foam for opening support should not be removed until afte installation.
Horizontal corners available for 90° turns in the same plane, inside corner to transition from wall to ceiling or from wall to wall and external corners to transition from wall to wall surfaces or around soffits. Corners are prepared to feed a structure in both directions without the need of a feed profile.
Length Part Number FeedUnit Profile
Finish
06.1600
06.1601
06.1602
39.4’’ (1m)
59’’ (1.5m)
78.7 (2m)
06.1605
06.1606
06.1607
Part NumberIntermediate Profile
Inside CornerHorizontal Corner
06.161206.1610
3.9‘‘
[100
mm
]
1.4‘‘[35.0 mm]
1.6‘‘
CEILING LINE
[41 mm]
5.6‘‘
[142mm]
4.9‘‘
[125mm]
5.6‘‘
[142mm]
4.9‘‘[125mm]
5.9‘‘
[150mm]
5.9‘‘
[150mm]
14 = Black
40 = White
14 = Black
40 = White
14 = Black
40 = White
14 = Black
40 = White
14 = Black
40 = White
Luminaries
Light Strip Module HE Find Me SuspensionSpot 120Spot Module Multi Spot Mini Glo-Ball
• Linear Hight Efficency LED can berapidly exchanged and repositionedwithout tools. Light elements are quickto position and connect automatically with magnets.• Built-in dimming switch dims fixturewith allen key from 20-100%, DALI and0-10V.• Clear end caps included for continuouslook when installing end-to-end.
• Accent LED Spot modules can berapidly exchanged and repositionedwithout tools.• Light elements are quick to positionand connect automatically with magnets• Built-in dimming knob dims fixturefrom 20-100%, DALI and 0-10V• Standard beam spread is 14°• Additional interchangeable lensesavailable in 27° and 36°, and 10° x 42°elliptical beam spread
• Decorative modules canbe rapidly exchanged andrepositioned withouttools. Light elements arequick to position andconnect with magnets• Built-in dimming knoballows fixture to dim from20-100%, DALI and 0-10V
• Accent lighting LED module tobe installed in The Running Magnet 2.0 System• Built-in DC/DC electronic voltage converter.• Built-in dimming knob dims fixture from 39-100%, DALI and 0-10V• Standard beam spread are 24º and 33º• Honeycomb and cross baffle included
How to Specify ex. 06.1614.40.90
Fixture Type
Job Name
Running Magnet 2.0 SurfaceHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 3 of 7
For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 04.12.2018
Optional Accessory
Drivers
Extra End Caps
LED Driver- 96W Optronic 24V Driver,no dimming wire configuration
Dimming Control Unit Box 24V-48V, 1-10V
Splice Box
LED96W24V-Non-Dim
08.0613.14
SP-24V-96W-Non-Dim
13‘‘
[347mm]
2.2‘‘[59mm]
1.7‘‘[46mm]
08.8887.14A
08.8887.40A
Fixture Type
Job Name
Running Magnet 2.0 SurfaceHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 4 of 7
For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 04.12.2018
Light Strip Module HE
Spot Module
CCT CRI
90
90
90
90
3000
2700
3000
2700
3000
2700
3000
2700
440460
880920
13201380
17601840
435435
833870
12491305
16651740
7.5 105º
15 105º
22.5 105º
30 105º
03.7001.14.90
03.7000.14.90
03.7001.14.DD
03.7000.14.DD
03.7001.14.9V
03.7000.14.9V
03.7003.14.90
03.7002.14.90
03.7003.14.DD
03.7002.14.DD
03.7003.14.9V
03.7002.14.9V
03.7005.14.90
03.7004.14.90
03.7005.14.DD
03.7004.14.DD
03.7005.14.9V
03.7004.14.9V
03.7007.14.90
03.7006.14.90
03.7007.14.DD
03.7006.14.DD
03.7007.14.9V
03.7006.14.9V
11.8’’ (300mm)
23.6’’ (600mm)
35.4’’ (900mm)
47.2’’ (1200mm)
Delivered LumenInitial Lumen Watts BeamSpread
Part NumberDimmable on board
Light Strip Lenght Part Number DALIDimming
Part Number0-10V Dimming
6.7‘‘[170.2 mm]
1.97‘
‘
ø 1.34‘‘
[50
mm
]
[34 mm]
Linear High Efficency LED can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically withmagnets. Built-in dimming knob dims fixture from 20-100%, DALI and 0-10V. Clear end caps included for continuous look when installing end-to-end.
Accent LED Spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets.Built-in dimming knob dims fixture from 20-100%, DALI and 0-10V. Standard beam spread is 14°. Additional interchangeable lenses available in 27° and 36°, and10° x 42° elliptical beam spread.
90º
360º
Optional Accessories
08.8760.00
08.8761.00
08.8759.00
08.8427.14
Flood Lens Accessory 23°
Wide Flood Lens Accessory 33°
Elliptical Lens Accessory
Extra long snoot for added shielding in aluminum with black finish (does not protude from channel when tucked up into housing)
Initial Lumen
CRI CCT DeliveredLumen
418
404
600903000
550902700
8
550
14º
14º
03.6302.14A90 03.6302.14ADD 03.6302.14A9V
03.6303.14A90 03.6303.14ADD 03.6303.14A9V
Watts BeamSpread
Part Number Dimmable on board
Part Number DALI-Dimming
Photometric
30°
60°
90°
30°
60°
90°
6199 Cd/Klm
E(lx/Klm)D (m)
h(m) 21°
1
2
3
4
5
6199
1550
689
387
248
0.37
0.74
1.11
1.48
1.85
2.8
‘‘1.
3‘‘
[72
mm
][3
4 m
m]SEE TABLE
5.16‘‘[129 mm]
Part Number 0-10V Dimming
Fixture Type
Job Name
Running Magnet 2.0 SurfaceHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 5 of 7
For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 04.12.2018
Multi Spot 4
Spot 120
Accent lighting LED module to be installed in The Running Magnet 2.0 System. Built-in DC/DC electronic voltage.
Optional Accessories
08.8760.00
08.8761.00
08.8759.00
Flood Lens Accessory 20°
Wide Flood Lens Accessory 30°
Elliptical Lens Accessory
CCT CRI
90
90
90
90
2700
2700
3000
3000
706985
430985
7311060
4441060
12.5 25º
12.5 33º
12.5 25º
12.5 33º
03.6285.14.90
03.6285.40.90
03.6285.14.DD
03.6285.40.DD
03.6285.14.9V
03.6285.40.9V
03.6284.14.DD
03.6284.40.DD
03.6284.14.9V
03.6284.40.9V
03.6286.14.DD
03.6286.40.DD
03.6286.14.9V
03.6286.40.9V
03.6287.14.DD
03.6287.40.DD
03.6287.14.9V
03.6287.40.9V
03.6284.14.90
03.6284.40.90
03.6286.14.90
03.6286.40.90
03.6287.14.90
03.6287.40.90
DeliveredLumen
Initial Lumen
Watts BeamSpread
Part NumberDimmable on board
Finish Part Number DALI-Dimming
Part Number 0-10V Dimming
30°
60°
90°
30°
60°
90°
6199 Cd/Klm
E(lx/Klm)D (m)
h(m) 21°
1
2
3
4
5
6199
1550
689
387
248
0.37
0.74
1.11
1.48
1.85
2.7‘‘
0.8
7‘‘
1.57‘‘
7.87‘‘
1.3‘‘
ø 1.8‘‘
4.8‘‘
5.1‘‘
[69
mm
]
[22m
m]
[40
mm
]
[200
mm
]
[33 mm]
[46 mm]
[121 mm]
[130 mm]
4.7‘‘[119 mm]
14 = Black
40 = White
14 = Black
40 = White
14 = Black
40 = White
14 = Black
40 = White
Initial Lumen
CRI CCT DeliveredLumen
674
630
4 X 210903000
4 X 210902700
10
10
11º
11º
03.6306.14.90 03.6306.14.DD 03.6306.14.9V
03.6305.14.90 03.6305.14.DD 03.6305.14.9V
Watts BeamSpread
Part Number Dimmable on board
Part Number DALI-Dimming
PhotometricPart Number 0-10V Dimming
Fixture Type
Job Name
Running Magnet 2.0 SurfaceHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 6 of 7
For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 04.12.2018
Other Light Module
Mini Glo - Ball S
Mini Glo -Ball
Find Me Suspension
Decorative modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically through the magic ofmagnets. Built-in dimming knob allows fixture to dim from 20-100%.
CCT CRI
803000
2700
880 880
800 8007
03.6261.14B90
03.6260.14B90
03.6261.14.DD
03.6260.14.DD
03.6261.14.DD
03.6260.14.DD
Initial Lumen Initial Lumen Watts Part Number Built-in Dimming Part Number DALI-Dimming Part Number 0-10V Dimming
2.8‘‘
2.8‘‘
2.8‘‘
3.3‘‘
118‘‘
118‘‘
3.6‘‘
8.7‘‘
ø 4.3‘‘
ø 4.3‘‘
ø 1.3‘‘
[72 mm
]
[72 mm
]
[72 mm
]
[85 m
m]
[300
0 m
m]
MA
X.
[300
0 m
m]
MA
X.
[92 mm
]
[220 m
m]
[110 mm]
[110 mm]
[33 mm]
5.11‘‘[130 mm]
5.07‘‘[129 mm]
5.11‘‘[130 mm]
CCT
CCT
CRI
CRI
80
90
90
3000
2700
3000
3000
440 271
600 365
560 344
400 2593.5
8 14º
8 14º
03.6263.14B90
03.6262.14B90
03.6273.30C90
03.6273.14C90
03.6273.06C90
03.6272.30C90
03.6272.14C90
03.6272.06C90
03.6263.14.DD
03.6262.14.DD
03.6263.14.tbd
03.6262.14.tbd
03.6273.30CDD 03.6273.30C9V
03.6273.14CDD 03.6273.14C9V
03.6273.06CDD 03.6273.06C9V
03.6272.30CDD 03.6272.30C9V
03.6272.14CDD 03.6272.14C9V
03.6272.06CDD 03.6272.06C9V
Initial Lumen
Initial Lumen
DeliveredLumen
DeliveredLumen
Watts
Watts
Beam Spread
Beam Spread
Finish
Part NumberDimmable on board
Part NumberDimmable on board
Part NumberDALI-Dimming
Part NumberDALI-Dimming
Part Number 0-10V Dimming
Part Number 0-10V Dimming
Mini Glo - Ball S
Find Me Suspension
14 = Black
06 = Chrome
30 = White
14 = Black
06 = Chrome
30 = White
Fixture Type
Job Name
Running Magnet 2.0 SurfaceHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 7 of 7
For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 04.12.2018
Visit FLOS Worldwide YouTube channel for installation videos
How to Specify
A. Select and position corners
1. Horizontal - Connect sections on flat surfaces (90º corner)2. Inside - Transition from wall to ceiling (inside corner)3. External - Turn outside corners for walls and soffits (270° corner)
B. Fill lengths between corners with Linear Housings
3’ or 6’ sections can be specified as feed or intermediate profiles. Profile can be easily cut to site to exact length and joined together.
C. Drivers
Quantity of drivers determined by total wattage or light elementsin section (approximately one every 10 feet). Maximum driver distance is 15’. Locate drivers nearby. DALI dimming hardwires into profile, bypasses driver.
D. Select Spot heads
Linear strips are available in five nominal lengths: 1’, 2’, 3’, 4’ and 5’. Individual units can be adjusted from 20-100% with on board switch, DALI and 0-10V