rpl assessor kit - velg training kit... · painting and decorating by taking a practical approach...
TRANSCRIPT
BCG30603 Certificate III in Painting and Decorating Version 1: January 2008
RPL Assessor Kit
© State of Queensland 2008 The Copyright Act 1968 (Cth) protects this material. Permission, however, is granted to trainers and teachers to make copies for use within their own training organisation or in a workplace where the training is being conducted. This permission does not extend to the making of copies for hire or sale to third parties. Requests and enquiries concerning significant enhancement** of this material should be directed in writing to: The Manager Skills First (RPL) Department of Education, Training and the Arts LMB 527 GPO Brisbane QLD 4001 Email: [email protected] Phone: (07) 3237 0361 This work has been produced with the assistance of funding provided by the Queensland Government. Disclaimer The Department of Education, Training and the Arts has used its best endeavours to ensure that this product is correct and current at the time of publication, but does not give any warranty nor accept any liability in relation to the contents. If any law prohibits the exclusion of such liability, the Department limits its liability to the extent permitted by law. Acknowledgments Bruce Fyfe Construction Training Queensland
George Englert Master Painters, Decorators and Sign Writers Association of Qld
Randy Flierman Avenir Consulting
Cover Images Courtesy Master Painters Australia Notes This RPL Assessor Kit was developed with reference to BCG03 (Version 4) released on 8 December 2006. This RPL Assessor Kit is available free of charge at www.resourcegenerator.gov.au **The Department of Education, Training and the Arts considers any enhancement which amounts to a modification of 10% or more of the material, to be significant.
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 3 of 115 Version 1: January 2008
HOW TO USE THIS RPL ASSESSOR KIT This RPL Assessor Kit is divided into sections to allow you to easily access only those sections you require at any given time. These sections are:
SECTION A – Assessor Information You need to read this information before conducting an assessment. It outlines the intent and processes surrounding this RPL assessment and how it differs from assessment undertaken following formal training.
SECTION B – Candidate Information and Application Forms You give this information to the candidate. It tells them about the assessment process as well as containing simple forms for the applicant to fill out. From the information provided by the candidate on these forms, you will be able to gain a general understanding of the skills and experience the candidate may have, as well as potential referee contacts.
SECTION C – Competency Conversation You use this section to determine and record candidate competence via a competency conversation. In other words, these questions guide your conversation with the applicant and assist in your assessment of their competence. The notes you take about this conversation are important evidence for assessment.
SECTION D – Practical Tasks and Observation Recording Sheets You use this section to assess competencies through a practical demonstration of the candidate’s skills. It contains practical tasks/scenarios on the outcomes required to determine competency and a place to record your observation. The notes you take are important evidence for assessment.
SECTION E – Resources for Practical Tasks You use this section to access required resources for performing practical tasks and scenarios.
SECTION F – Third Party Verification You give this section to the referees to confirm the candidate’s skills and experience in this qualification/occupation. The referees may fill out the appropriate form and return to you to confirm your judgement. You may be able to complete this part of evidence gathering in person while at the workplace.
SECTION G – Assessment Tables You use this table as a reference tool to see at a glance how units/elements of competency are assessed within the tool. All the elements and performance criteria within the competency units are cross-matched in this table with a corresponding assessment question/task/scenario. This allows you to validate the assessment process against the qualification.
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 4 of 115 Version 1: January 2008
SECTION A
Assessor Information It is VITAL you read this information prior to commencing your RPL assessment. It provides generic information on assessment, as well as an overview of this streamlined RPL assessment process.
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 5 of 115 Version 1: January 2008
ADVICE FOR ASSESSORS This RPL Assessor Kit streamlines the RPL assessment process for BCG30603 Certificate III in Painting and Decorating by taking a practical approach to RPL and increasing the use of on-site questioning and observation. This will assist in developing a “picture of the candidate’s skills and knowledge”. This picture can then be compared with industry standards enabling a determination of whether the candidate has achieved the required outcomes. MPORTANT ASPECTS TO REMEMBER: A sound knowledge of assessment and the qualification is essential It is important to have a good understanding of the competencies and qualification/s appropriate to the candidate’s goals. Assessing a single unit of competency is rarely cost or time effective. Where possible, effort should be made to assess several units at the same time taking advantage of any commonality in content. This means looking at the whole picture of a particular job role as it happens in industry and assessing holistically. This saves valuable time in the assessment process. Assessment involves judgement This tool encourages the use of a “competency conversation” to maximise the candidate’s opportunities to demonstrate competence. This is NOT an oral exam. It is about using the two or three holistic questions provided to start a conversation with the candidate which draws out their actual individual experiences and relevant skills. In other words, it is about the assessor probing the candidate through a conversation to draw out further information on the candidate’s experience which may not be forthcoming due to nerves or confusion over technical terminology. The tool also provides observable tasks to allow candidates to demonstrate skills. Authentication/verification is integral to RPL assessment It is critical information gleaned from the interview and observation be confirmed with those who can vouch for the candidate’s skill over time. Supervisors would generally perform this role. Authentication may also be done through conversation but it cannot be stressed enough that it is essential assessors take careful notes to back up and record their judgement. Recording assessment is critical Keep careful records of all aspects of conversations, skills demonstration or documentation viewed that support the claim of prior learning. Remember – the record is the document that makes sense of the assessment and why a particular judgment was made. Keeping detailed notes about the candidate’s response is vital, as is the rationale for judgement. The assessment record is a legal document and must be signed, dated and stored according to requirements of the State Training Authority and the AQTF Standards for Registered Training Organisations. Assessor summaries and other quality assurance documentation from your own Registered Training Organisation will also be required. For examples of assessment summary documentation, please see Assessment Guide Number 1: Training Package Assessment Materials Kit: http://resourcegenerator.gov.au/loadpage.asp?page=TPAGGuide01.htm
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 6 of 115 Version 1: January 2008
To access further information on the principles assessment and dimensions of competency, you can visit Assessment Guide Number 1: Training Package Assessment Materials Kit. http://resourcegenerator.gov.au/loadpage.asp?page=TPAGGuide01.htm To access further information on the Australian Qualifications Framework, you can visit: http://www.aqf.edu.au/ Advice on assessment of Prerequisite Units BCG30603 Certificate III in Painting and Decorating is built on a structure of accumulated skills and knowledge. This means that there are hierarchies of skills and knowledge that are built up from a range of competencies. Any units of competency that underpin others are listed as prerequisites. In terms of training delivery and assessment, the term ‘prerequisite’ means that a person cannot be deemed ‘competent’ in the higher level unit until they are competent in the prerequisite units. An RTO may choose an integrated assessment approach. In this case the actual assessment of prerequisites may occur concurrently with other units.
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 7 of 115 Version 1: January 2008
COMPETENCIES IN THIS RPL ASSESSMENT TOOL CERTIFICATE III IN PAINTING AND DECORATING CORE UNITS Unit Code Unit Title Questions Practical BCGCM1001B Follow OH&S policies and procedures
*BCGCM1002B Work effectively in the General Construction Industry
*BCGCM1003B Plan and organise work
*BCGCM1004B Conduct workplace communication
*BCGCM1005B Carry out measurements and calculations
BCGCM2001B Read and interpret plans and specifications
*BCGCM2008B Erect and dismantle restricted height scaffolding
*BCGCM3001B Operate elevated work platforms
*BCGPD2001B Handle painting and decorating materials
*BCGPD2002B Use painting and decorating tools and equipment
*BCGPD2003B Remove and replace doors, door and window furniture
*BCGPD3001B Prepare surfaces for painting
*BCGPD3002B Apply paint by brush and roller
*BCGPD3003B Apply texture coat paint finishes by brush, roller and spray
*BCGPD3004B Apply paint by spray
*BCGPD3005B Match specified paint colour
*BCGPD3006B Apply stains and clear timber finishes
*BCGPD3007B Apply wall paper
*BCGPD3008B Apply decorative paint finishes
*BCGPD3011B Treat lead paint hazards
ELECTIVE UNITS (Select 4 units from the list below, a maximum of 1 relevant elective AQFIII level competency units may be substituted from other qualifications within the General Construction Training Package or from other endorsed Training Packages). Unit Code Unit Title Questions Practical *BCGPD3009B Remove graffiti and apply protective coatings
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 8 of 115 Version 1: January 2008
Unit Code Unit Title Questions Practical *BCGPD3010B Apply protective paint coating systems
*BCGPD3012B Apply advanced wallpaper techniques
*BCGSP3003B Apply trowelled texture coat finishes
BSBSBM301A Research business opportunities
LMFGG2008A Glaze/reglaze residential windows and doors
MEM08012B Prepare surfaces by abrasive blasting (basic)
**MEM08013B Prepare surfaces by abrasive blasting (advanced)
* Denotes required completion of pre-requisite unit: BCGCM1001B Follow OH&S policies and procedures ** Denotes required completion of pre-requisite units: MEM08012B Prepare surfaces by abrasive blasting (basic) MEM08016B Control blast coating by products, materials and emissions MEM13003B Work safely with industrial chemicals and materials
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 9 of 115 Version 1: January 2008
OVERVIEW OF RECOGNITION PROCESS This kit has been developed to streamline the application for recognition of prior learning.
GAP TRAINING (ONLY IF
REQUIRED)
APPLICATION
PRACTICAL ASSESSMENT
COMPETENCY CONVERSATION
INTERVIEW and DOCUMENT REVIEW
ISSUE QUALIFICATION- RTO
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 10 of 115 Version 1: January 2008
RPL ASSESSMENT PROCESS FLOWCHART FOR ASSESSORS
Step 1: Analyse the application.
Identify links between any documents applicant provides
and competency units. Identify any key questions for
competency conversation.
Step 5: Identify any practical activities required to confirm competency
Observe practical activity
Step 7: Identify areas where 3rd party
verification is needed and inform candidate.
Confirm / Verify 3rd party reports
Step 3: Conduct competency
conversation
Step 2: Record results of analysis in table
at end of application
Step 4: Complete the Record of
Conversation sheets during the competency conversation
Step 6: Complete Practical Assessment
Tasks Observation Sheets
Step 8: Receive completed Third party
reports
* Remember RPL assessment is an accumulative process of collecting evidence.
Complete assessment sign off & file documentation.
Issue qualification / advise of gap training as appropriate
Assessment Activity Record keeping Activity
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 11 of 115 Version 1: January 2008
STEPS IN THE RPL PROCESS 1. Complete application The candidate completes the application forms in SECTION B. It is important candidates provide as much information of their previous experience in the painting and decorating industry as is available. Documents that may be available include but are not limited to:
any licences General Safety Induction (Construction Industry) Card (Blue Card) brief CV or work history certificates/results of assessment indentures/trade papers certificates/results of assessment – interstate/overseas certificates/results of assessment – universities results/statement of attendance/certificates – vendor training courses, in-house
courses, workshops, seminars, symposiums results/statements of attendance/ certificates – club courses e.g. first aid, officials, surf
life saving, etc tickets held eg forklift, crane, etc photographs of work undertaken diaries/task sheets/job sheets/log books site training records site competencies held record membership of relevant professional associations hobbies/interests/special skills outside work references/letters from previous employers/supervisors industry awards any other documentation that may demonstrate industry experience
Candidates also need to provide contact details for one or two referees who can confirm their industry skills in context and over time. To have skills formally recognised under the Australian Qualifications Framework, you must ensure the candidate’s skills meet industry standards. 2. Interview about candidate’s documentary information Review the information provided by the candidate and arrange a time for both you and the candidate to discuss. Begin alignment of documentation and skills to the following qualification:
BCG30603 Certificate III in Painting and Decorating The candidate will have the opportunity to discuss and identify previous experience with you. The available documents are step one in collecting information and you will need to determine which units of competency, if any, are fully covered at this stage. You use your own or your RTO’s assessment recording forms to record this stage of the assessment. There may be instances where the candidate has little, or no, documentary information of industry experience. This is not a barrier to gaining recognition. This will just require you to rely on the questioning, practical assessment and referee validation phases of the RPL process.
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 12 of 115 Version 1: January 2008
3. Questions for the Competency Conversation The bank of questions in SECTION C is the next phase in collecting evidence for the RPL process. The questions are designed to enable you to have a “competency conversation” with the candidate to further gain evidence of their past experience. REMEMBER, the primary focus is on the candidate’s experience. Each question has “key points” to look for in responses. You may use the list of key points to formulate questions of your own if you wish, or contextualise the question to the candidate’s particular work situation. The Record of Conversation sheets indicate relevant content that should be sought. Place a tick next to each key point as you hear this topic being discussed during the conversation. You should read the “industry requirements” of each competency before the candidate answers the questions posed. You may also target the assessment to those aspects that present the greatest risk in the industry. Questions are aligned with the relevant unit/s of competency in SECTION G. It is not intended every question for all competencies is asked, only those competencies the initial interview about the candidate’s documentary evidence has failed to fully address. The question bank covers most but not all units in the kit. Units without questions are covered in the practical assessment/scenario section. 4. Practical assessment tasks It is important that you use both Steps 3 (Questioning) and 4 (Practical Assessment) in doing this assessment. The RPL process is a streamlined RPL process which does not rely solely on practical assessment but uses a combination of questioning and practical to provide evidence of candidate competence. This is the third phase in collecting evidence. A practical skills test is then conducted by you at the candidate’s workplace or another suitable venue. Appropriate permission must be sought before entering workplaces. This is a further opportunity for candidate to demonstrate competence. It is expected the practical assessment will comprise only those competencies the candidate is still unable to demonstrate knowledge/experience in after documentary review and questioning have been applied. These assessments contain the practical skills and application of knowledge for the qualification. A number of holistic practical assessments are included in this kit (SECTION D) to assist you with tasks suitable for observation on the job. You decide if the response to questions and practical assessment tasks fulfils the requirements of the standard and may choose to pursue the issue further for a determination to be made. The assessment is a conversation/observation, not an exam, and you are encouraged to assist candidates to focus responses toward relevant issues. Assessing through observation and questioning, particularly on the job, will speed up and streamline the RPL assessment process. NOTE: Where candidate’s documentation and questions meet the assessment requirement, it is still strongly recommended the candidate undertake one practical assessment so you are confident in making a judgement of “competent”. The practical assessment selection should be negotiated between you and the candidate. Recording sheets for candidate information, questioning and the practical assessments have been included in SECTION D. You may use other recording mechanisms provided these also keep a complete record of assessment and justification of judgement. Candidate responses, observations of skills demonstrated and documents presented as evidence must be noted in enough detail so
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 13 of 115 Version 1: January 2008
anyone external to the process (e.g. a fellow assessor, auditor, lawyer, etc) can read the record and retrace your judgement. 5. Gap training RPL is an assessment process designed to show areas of competence and to identify IF a candidate has gaps in skills and knowledge against a whole qualification. Not all candidates will have skill/knowledge gaps. If a candidate has skills gaps, a pathway to complete training in the outstanding units can be negotiated to assist the client to gain the full qualification.
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 14 of 115 Version 1: January 2008
EVIDENCE REVIEW Recognition of prior learning outcomes (both Granted and Not Granted) are now funded nationally and as such will be included in National AVETMISS audits. NCVER have stipulated evidence recording requirements for RPL assessments as a minimum requirement for passing an AVETMISS audit. The following “Evidence Review” proforma has been approved by NCVER as covering AVETMISS audit requirements for RPL recorded outcomes. It also gives you an opportunity to track a student’s assessment progress at a glance. It is expected that this “Evidence Review” summary sheet (or similar) would be attached to each participant’s evidence compiled during the RPL assessment process. (Place a tick in the appropriate evidence collection method column for each unit of competency. Place a line through those units not examined as part of this RPL assessment.)
Unit Code Unit Title
Que
stio
ns
Prac
tical
Doc
umen
ts
3rd P
arty
R
epor
t
Oth
er
evid
ence
Core Units BCGCM1001B Follow OH&S policies and procedures
*BCGCM1002B Work effectively in the General Construction Industry
*BCGCM1003B Plan and organise work
*BCGCM1004B Conduct workplace communication
*BCGCM1005B Carry out measurements and calculations
BCGCM2001B Read and interpret plans and specifications
*BCGCM2008B Erect and dismantle restricted height scaffolding
*BCGCM3001B Operate elevated work platforms
*BCGPD2001B Handle painting and decorating materials
*BCGPD2002B Use painting and decorating tools and equipment
*BCGPD2003B Remove and replace doors, door and window furniture
*BCGPD3001B Prepare surfaces for painting
*BCGPD3002B Apply paint by brush and roller
*BCGPD3003B Apply texture coat paint finishes by brush, roller and spray
*BCGPD3004B Apply paint by spray
*BCGPD3005B Match specified paint colour
*BCGPD3006B Apply stains and clear timber finishes
*BCGPD3007B Apply wall paper *BCGPD3008B Apply decorative paint finishes *BCGPD3011B Treat lead paint hazards
Elective Units
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 15 of 115 Version 1: January 2008
Unit Code Unit Title
Que
stio
ns
Prac
tical
Doc
umen
ts
3rd P
arty
R
epor
t
Oth
er
evid
ence
*BCGPD3009B Remove graffiti and apply protective coatings
*BCGPD3010B Apply protective paint coating systems
*BCGPD3012B Apply advanced wallpaper techniques
*BCGSP3003B Apply trowelled texture coat finishes
BSBSBM301A Research business opportunities
LMFGG2008A Glaze/reglaze residential windows and doors
MEM08012B Prepare surfaces by abrasive blasting (basic)
**MEM08013B Prepare surfaces by abrasive blasting (advanced) Assessor’s Name:
Assessor’s Signature:
Date:
*Denotes required completion of pre-requisite unit: BCGCM1001B Follow OH&S policies and procedures ** Denotes required completion of pre-requisite units: MEM08012B Prepare surfaces by abrasive blasting (basic) MEM08016B Control blast coating by products, materials and emissions MEM13003B Work safely with industrial chemicals and materials
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 16 of 115 Version 1: January 2008
SECTION B
Candidate Information and Application Forms
You give this information to the candidate for them to read about the RPL process and to complete the appropriate forms.
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 17 of 115 Version 1: January 2008
WHAT DOES IT MEAN TO BE RECOGNISED IN PAINTING AND DECORATING?
Painting and decorating is one of the more traditional trades, little is known of the trade and its structures before the late 1200s, at which point guilds began to form in the United Kingdom and have become the modern associations of today guiding principles and standards.
Painters and decorators apply paint, varnish, wallpaper and other finishes to protect, maintain and decorate interior and exterior surfaces of domestic, commercial and industrial buildings and other structures.
A Painter and Decorator may perform the following tasks:
• work out the quantity of materials needed for the job by taking surface measurements or by looking at job specifications or drawings
• erect scaffolding, cradles and ladders, and placing drop-sheets to protect areas from dripping paint
• remove old paint or paper by sanding or scraping or by using blowtorches or liquid paint removers and, when removing old paper, by using steam strippers
• prepare surfaces by fixing woodwork, filling or sealing holes, cracks and joins, and washing them down to remove dust and grease
• select and prepare paints to match colours by the addition of tints • brush, roll or spray the paints, stains, varnishes and other finishes • when wallpapering, set out the area according to the pattern match and starting point in the room,
cut the paper to the appropriate length, apply paste to the back of each strip, and hang the paper on the wall, smoothing out any wrinkles or bubbles
• spray paint surfaces using a spray gun or specialised equipment • apply decorative paint finishes such as stencils, colour glaze, graining, marbling and lettering • wash equipment and clean work areas
Painters may concentrate on a specific area of work, such as the internal or external painting of domestic homes, commercial buildings or industrial structures and equipment. They may work alone or as members of a team. They often work from ladders and scaffolding and do a lot of bending and stretching.
Personal Requirements:
• physically fit • able to work at heights • interested in practical work • normal colour vision • good sense of balance
The Certificate III qualification for painting and decorating requires 24 units of competency to be successfully completed to achieve the credential. Of these 24 units, 20 are compulsory and a further 4 may be selected from the list of Elective units. “If you are doing these roles in your job, then don’t write off your skills – consider getting them recognised.”
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 18 of 115 Version 1: January 2008
TIPS AND HINTS TO HELP YOU PREPARE FOR RECOGNITION To have skills formally recognised in the national system, assessors must make sure you have the skills and knowledge to meet the industry standard. This means you must be involved in a careful and comprehensive process that covers the content of all unit/s or qualification/s you can be recognised for. Assessment happens in a variety of ways. Being prepared can save you valuable time and hassle and make the recognition process stress-free for you. Here are some tips and hints for you:
1. Be prepared to talk about your job roles and your work history. Bring a resume or jot down a few points about where you have worked, either paid or unpaid, and what you did there.
2. Bring your position description and any performance appraisals you have from any painting
and decorating facilities you have worked in.
3. Consider the possibilities for workplace contact. Are you in a workplace that is supporting your goals to get qualified? Would you feel comfortable to have the assessor contact your workplace or previous workplaces so your skills can be validated?
4. Think about who can confirm your skill level. Think about current or recent supervisors who
have seen you work in the past 18 months and will be able to confirm your skills. The assessor will need to contact them. You may also have community contacts or even clients themselves who can vouch for your skills level.
5. Collect any certificates from in-house training or formal training you have done in the past.
6. You can speak with your training organisation about other ways you can show your skills in
painting and decorating. These could be letters from employers, records of your professional development sessions, employers or clients in related industries or government agencies, acknowledgements, workplace forms (as long as they don’t show client details) or other relevant documents.
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 19 of 115 Version 1: January 2008
STEPS IN THE RPL PROCESS
Step 1 – Provide information of your skills and experience Complete the attached forms and provide as much information of your previous experience in painting and decorating as you can. This is your first opportunity (and not the last) to provide proof of your variety of experience in the industry. Here you can supply examples of your work history which could include:
any licences General Safety Induction (Construction Industry) Card (Blue Card) brief CV or work history certificates/results of assessment indentures/trade papers certificates/results of assessment – interstate/overseas certificates/results of assessment – universities results/statement of attendance/certificates – vendor training courses, in-house
courses, workshops, seminars, symposiums results/statements of attendance/ certificates – club courses e.g. first aid, officials, surf
life saving, etc tickets held eg forklift, crane, etc photographs of work undertaken diaries/task sheets/job sheets/log books site training records site competencies held record membership of relevant professional associations hobbies/interests/special skills outside work references/letters from previous employers/supervisors industry awards any other documentation that may demonstrate industry experience
Depending on the industry you have worked in, you may or may not have documentary evidence available. This should not deter you from seeking RPL as the Assessor will work with you during the RPL process. You will also need to supply contact details of one or two work referees who can confirm your skills in the industry.
Step 2 – Conversation with Assessor An assessor will review the information you have provided (usually with you) and begin to match up your skills to the units/subjects in the qualification. At this point, you will have the opportunity to discuss and identify your previous experience with the assessor who will understand your industry experience and conduct a competency conversation with you. You will be required to answer painting and decorating related questions to identify your current skills.
Step 3 – Practical demonstration of your skills The assessor will conduct a practical skills test at your workplace (if appropriate) or at another suitable venue. This, again, is an opportunity to demonstrate your level of competence. This assessment will be focussed on skills that are required in the qualification. Your assessor will identify the skills that he/she will want you to demonstrate.
Further steps After the assessment, your assessor will give you information about the skills that have been recognised and whether you have gained the full qualification. If you do have skill gaps, these may be addressed through flexible training.
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 20 of 115 Version 1: January 2008
APPLICATION – Self Assessment Questionnaire BCG30603 Certificate III in Painting and Decorating
Candidate Name: Date Completed: Please identify your level of experience in each competency.
I have performed these tasks Unit Code Unit Title Frequently Sometimes Never
CORE UNITS BCGCM1001B Follow OH&S policies and procedures
BCGCM1002B Work effectively in the General Construction Industry
BCGCM1003B Plan and organise work
BCGCM1004B Conduct workplace communication
BCGCM1005B Carry out measurements and calculations
BCGCM2001B Read and interpret plans and specifications
BCGCM2008B Erect and dismantle restricted height scaffolding
BCGCM3001B Operate elevated work platforms
BCGPD2001B Handle painting and decorating materials
BCGPD2002B Use painting and decorating tools and equipment
BCGPD2003B Remove and replace doors, door and window furniture
BCGPD3001B Prepare surfaces for painting
BCGPD3002B Apply paint by brush and roller
BCGPD3003B Apply texture coat paint finishes by brush, roller and spray
BCGPD3004B Apply paint by spray
BCGPD3005B Match specified paint colour
BCGPD3006B Apply stains and clear timber finishes
BCGPD3007B Apply wall paper
BCGPD3008B Apply decorative paint finishes
BCGPD3011B Treat lead paint hazards
ELECTIVE UNITS BCGPD3009B Remove graffiti and apply protective coatings
BCGPD3010B Apply protective paint coating systems
BCGPD3012B Apply advanced wallpaper techniques
BCGSP3003B Apply trowelled texture coat finishes
BSBSBM301A Research business opportunities
LMFGG2008A Glaze/reglaze residential windows and doors
MEM08012B Prepare surfaces by abrasive blasting (basic)
MEM08013B Prepare surfaces by abrasive blasting (advanced) Candidate Signature: Date:
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 21 of 115 Version 1: January 2008
RPL APPLICATION FORM Applicant Details: 1. Occupation you are seeking recognition in
2. Personal Details
Surname
Preferred Title (Mr, Mrs, Ms, Miss)
First Name/s
Any other name used
Home Address
Postal address if different from above
Home: Work: Telephone Numbers
Mobile: Fax:
Date of Birth / /
Gender MALE / FEMALE
Age
Are you a permanent Resident of Australia
YES / NO
3. Current Employment
Are you currently employed? If Yes, in which occupation are you currently employed? Who is your current employer?
YES / NO ……………………………………………………… ……………………………………………………….
4. Armed Forces details (If Applicable)
Branch of Service
Trade classification on discharge
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 22 of 115 Version 1: January 2008
5. Further Training
Have you undertaken any training courses related to the occupation applied for?
YES / NO
If Yes
What occupation were you trained in?
Training completion Date (month, year)
Country where you trained
Name of course and institution (if applicable)
6. Is there any further information you wish to give in support of your application
7. Professional Referees (relevant to work situation)
Name Position Organisation Phone Number Mobile Number Email Address
…………………………………………………………………… …………………………………………………………………… …………………………………………………………………… …………………………………………………………………… …………………………………………………………………… ……………………………………………………………………
Name Position Organisation Phone Number Mobile Number Email Address
…………………………………………………………………… …………………………………………………………………… …………………………………………………………………… …………………………………………………………………… …………………………………………………………………… ……………………………………………………………………
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 23 of 115 Version 1: January 2008
APPLICANT EMPLOYMENT HISTORY FORM
Period of Employment
(DD/MM/YYYY)
Name, Address and Phone number of
Employers From To
Position Held Full Time
Part-time
Casual
Description of Major Duties
1.
2.
3.
4.
Attach additional sheet if required If you are including documents in your application, please provide a brief description below
Document Description (e.g. resume, photos, awards etc)
Office Use Only – Assessor to use this section to align documents to specific units of competency and identify key questions for competency conversation
Declaration I declare that the information contained in this application is true and correct and that all documents are genuine. Candidate Signature: Date
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 24 of 115 Version 1: January 2008
SECTION C
Competency Conversation
This section assists the assessor in documenting the competency conversation.
Do NOT give this section to the candidate. Once you have assessed the candidate’s documentary information and determined which competencies you still require more information/evidence on, you use the question bank and Record of Conversation sheets in this section to document evidence of past experience. It is not intended that every question for all competencies be discussed during the conversation, only those competencies the initial documentary review has failed to fully address. Each question has “key points” to look for in responses. You may use the list of key points to formulate questions of your own if you wish, or contextualise or rephrase the suggested question to the candidate’s particular work situation. The questions are not intended to be a formal ‘script’ for the assessor to follow, but to provide guidance in exploring the range of the candidate’s skills, knowledge and experience in performing a particular task or function. The Record of Conversation sheets indicate relevant content that should be sought. Place a tick next to each key point as you hear this topic being discussed during the conversation. In doing so, you are making a statement of fact about what you hear the candidate say during the competency conversation. Use the Comments section to provide further detail about the context of the discussion or briefly outline any examples discussed by the candidate. You may also use the Comments section to make a brief analysis of the responses or summary judgements about the quality of the candidate’s responses in relation to the requirements of the competency standard. Remember, the notes you take about this conversation are important evidence and should be retained in the candidate’s assessment record.
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 25 of 115 Version 1: January 2008
QUESTION BANK
Note to Assessors: Refer to “Record of Conversation” sheets Unit of Competency
Question
Generic Components
Occupational Health and Safety
1. How have you kept up to date with the latest WH&S legislation and enterprise policies and procedures?
2. What safety instructions have you followed and what precautions do you take before commencing any work?
3. What actions have you taken when you recognised a workplace hazard, what are some examples and their associated risks?
4. In what circumstances are signs and barriers required and which ones have you used?
Generic Components
Plan and Prepare
5. What have you considered important for successful job planning? 6. Explain what methods you have used to sequence your work effectively and give
an example of how you have used that within your work role. 7. Using an example from a previous job, discuss your workload and what parts
were completed by other members of the crew. 8. Discuss priorities in your work and what variations might you make in case of
bad weather.
Generic Components
Communication
9. When uncertain about a situation, what actions have you taken? 10. How do you give and receive feedback when on a project? 11. How do you obtain relevant instructions and locate relevant information in order
to complete your responsibilities? 12. What visual signals and communication equipment do you use and why? 13. What is your role in workplace meetings?
Generic Components
Plans and Specifications
14. How do site plans, building plans and specifications affect projects you have worked on and your work role within the project?
15. Describe a situation where amendments have been made to project drawings and the implications that this has had on your work.
Generic Components
Environment
16. What considerations and protection provisions have you made for environmental conditions on a current or previous project?
Generic Components
Clean Up
17. Explain how you leave the worksite at the end of the day, how waste materials are disposed of and how equipment is stored.
BCGCM1001B
Follow OH&S policies and procedures
18. In the case of an emergency what have you done and what procedures did you follow?
19. How have you kept up to date with first aid techniques and CPR? 20. When commencing a new project what do you do to make a risk assessment of
the project? 21. What are the enterprise and/or site evacuation procedures that you follow in case
of an emergency? 22. What fire fighting equipment will you select if the fire is electrically combusted?
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 26 of 115 Version 1: January 2008
Unit of Competency
Question
BCGCM1002B
Work effectively in the General Construction Industry
23. Explain the scope, employment and economic importance of the General Construction industry and what that means to you?
24. What is the structure of the organisation you work for and who do you report to? 25. What are the employment conditions under which you are employed? 26. When a dispute occurs with another crew member, what action do you take? 27. What personal development activities have you entered into or are about to enter
into?
BCGCM1003B
Plan and organise work
See questions 5 to 8.
BCGCM1004B
Conduct workplace communication
See questions 9 to 13.
BCGCM1005B
Carry out measurements and calculations
28. What methods do you apply to obtain, confirm and record measurements? 29. What quantity estimations and calculations have you been required to make on a
project you have worked on? 30. In working out your project requirements what formulas did you use and what
measurement conversions did you make?
BCGCM2001B
Read and interpret plans and specifications
See questions 14 and 15.
BCGCM2008B
Erect and dismantle restricted height scaffolding
31. What regulations and Australian Standards do you associate with utilising restricted height scaffolding?
32. How would you calculate the load and inspect the safety and compliance of a scaffold intended to support up to 200kg at three metres high and a span of seven metres?
33. Explain the type of scaffolding you have used and the erection and dismantling process.
BCGCM3001B
Operate elevated work platforms
34. What are the important points about operating an elevated work platform safely?
BCGPD2001B
Handle painting and decorating materials
35. When new materials arrive on site, what considerations do you take account of and what procedures do you follow to handle them?
36. What important procedures do you follow when handling hazardous materials?
BCGPD2002B
Use painting and decorating tools and equipment
37. What hand, power and pneumatic tools have you used and how do you check and maintain them?
38. Detail any plant you have operated in the last six months and what maintenance procedures you followed.
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 27 of 115 Version 1: January 2008
Unit of Competency
Question
BCGPD2003B
Remove and replace doors, door and window furniture
39. Explain the procedures you have followed to remove and replace doors, door and window furniture.
BCGPD3001B
Prepare surfaces for painting
40. What considerations have you taken into account when preparing new or uncoated, previously coated or wallpapered surfaces for painting or clear finishing?
BCGPD3002B
Apply paint by brush or roller
41. What preparation have you undertaken to ready the work area and materials when applying paint by brush or roller?
42. How have you ensured that the paint is applied with brush and roller to meet requirements and finished to specification?
BCGPD3003B
Apply texture coat paint finishes by brush, roller and spray
43. What preparation have you undertaken to ready the application area and materials when applying texture coat paint finishes?
44. Explain the steps you have followed when applying texture coat by brush and roller.
45. Outline the procedures you have followed when using spray equipment to apply texture coat.
BCGPD3004B
Apply paint by spray
46. What preparation have you undertaken to ready the application area and materials when applying paint by spray?
47. In preparation for spray painting, how have you set up and tested the equipment?
48. Explain the steps you have followed to apply paint using a spray system.
BCGPD3005B
Match specified paint colour
49. What technical information and procedures have you considered when matching paint colours to a specific sample?
BCGPD3006B
Apply stains and clear timber finishes
50. What preparation have you undertaken to ready the application area and materials when applying stains and clear timber finishes?
51. Outline the steps you have followed to apply stain to bare timber surfaces. 52. Outline the steps you have followed to apply clear finishes to surfaces.
BCGPD3007B
Apply wall paper
53. What preparation have you undertaken to prepare the surface when applying wallpaper?
54. Explain the procedures you have utilised when preparing to hang and apply wallpaper.
BCGPD3008B
Apply decorative paint finishes
55. What preparation have you undertaken to ready the application area when applying decorative paint finishes?
56. How have you applied mirror paint finishes? 57. How have you applied broken colour effects? 58. How have you produced imitation marble and imitation wood grain effects? 59. How have you applied stencils? 60. How have you applied lining by brush?
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 28 of 115 Version 1: January 2008
Unit of Competency
Question
BCGPD3011B
Treat lead paint hazards
61. What preparation have you undertaken to define and ready the work area when treating lead paint hazards?
62. Outline the procedures you have followed to remove and encapsulate the contaminated materials.
63. Specify what procedures you have followed to deal with lead paint hazard waste and check for contamination.
BCGPD3009B
Remove graffiti and apply protective coatings
64. What preparation have you undertaken to prepare the site and materials when removing graffiti and applying protective coatings?
65. When removing graffiti what aspects have you taken into consideration? 66. Outline the application process you have followed to apply preventative
application materials.
BCGPD3010B
Apply protective paint coating systems
67. When applying protective coatings, what preparation do you undertake, what have you done with surface imperfections, what methods of application do you follow and how do you test the coating?
BCGPD3012B
Apply advanced wallpaper techniques
68. What preparation have you undertaken to prepare the surface when applying wallpaper using advanced techniques?
69. Explain the advanced techniques you have utilised when preparing to hang and apply wallpaper.
BCGSP3003B
Apply trowelled texture coat finishes
70. How do you prepare the surface area, mix and apply materials for a textured coat finish to a surface?
71. Detail the process you would use to finish and cure the texture coat.
BSBSBM301A
Research business opportunities
72. In considering your own business opportunities, what would you consider to be your personal business skills and business opportunities?
LMFGG2008A
Glaze/reglaze residential windows and doors
73. When preparing for a project what site conditions, glass and frame requirements have you looked for before deciding on product and installation method?
74. Explain the procedures you have used to perform glazing on a recent project.
MEM08012B
Prepare surfaces by abrasive blasting (basic)
75. How have you ascertained the job requirements, set up the equipment and prepared surfaces when using abrasive blasting basic techniques and what procedures did you follow on completion?
MEM08013B
Prepare surfaces by abrasive blasting (advanced)
76. How have you ascertained the job requirements, set up the equipment and prepared surfaces when using abrasive blasting advanced techniques and what procedures did you follow on completion?
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 29 of 115 Version 1: January 2008
RECORD OF CONVERSATION Generic Components – Occupational Health and Safety
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 1: How have you kept up to date with the latest WH&S legislation and enterprise policies and procedures?
Question 2: What safety instructions have you followed and what precautions do you take before commencing any work?
Question 3: What action have you taken when you recognised a workplace hazard, what are some examples and their associated risks?
Question 4: In what circumstances are signs and barriers required and which ones have you used?
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 1
Follows WH&S legislation and regulations
Follows enterprise policy and procedures
Recognises breaches to legislation, policy or procedures
Question 2
Familiar with and follows safety instructions for the site and for personnel
Routinely applies precautions when undertaking own work
Sets up materials, equipment, worksite in accordance with workplace procedure
Question 3
Identifies and avoids obstacles
Ensures hazard and risk control; erects barricades and signage
Ensures correct manual handling/load carrying capacity
Uses and maintains personal protective equipment
WH&S legislation and regulations
Enterprise policies and procedures
Injury avoidance
Personal protective equipment
Risk and hazard identification
Sign and barrier identification
General Construction terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 30 of 115 Version 1: January 2008
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Uses guards on equipment if required
Inspects equipment for damage or worn parts; retires defective equipment
Uses MSDS
Keeps work area tidy and free of obstruction
Ensures availability of first aid
Recognises hazards and risks on site and with own work
Takes appropriate actions when risks are identified
Question 4
Interprets safety signs
Knows where signs should be placed
Understands purpose of barricades
Knows when and where safety barricades should be used
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 31 of 115 Version 1: January 2008
RECORD OF CONVERSATION Generic Components – Plan and prepare
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 5: What have you considered important for successful job planning?
Question 6: Explain what methods you have used to sequence your work effectively and give an example of how you have used that within your work role.
Question 7: Using an example from a previous job, discuss your workload and what parts were completed by other members of the crew.
Question 8: Discuss priorities in your work and what variations might you make in bad weather.
KEY POINTS
The candidate’s response should evidence the following INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 5
Reads and interprets work plans
Relates own tasks from job plan
Provides a verbal plan of action for a project
Understands pigmentation, colouring, drying and curing and the role of solvents
Understands adhesion and cohesion of paint
Considers industry and work sector (new building, maintenance/refurbishment, restoration, conservation)
Considers heritage listing, conservation, environmental concerns
Question 6
Provides a sequence of activities for the project
Indicates how time expectations on sequences were met
Question 7
Relates own workload
Plans, acquires and uses resources
Enterprise policies and procedures
Set priorities
Teamwork
General Construction terminology
Painting and Decorating terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 32 of 115 Version 1: January 2008
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Relates workload of team members and how that impacts on own work
Question 8
Recognises job priorities
Provides alternate solutions in the event of time delays
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 33 of 115 Version 1: January 2008
RECORD OF CONVERSATION Generic Components – Communication
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 9: When uncertain about a situation, what actions have you taken?
Question 10: How do you give and receive feedback when on a project?
Question 11: How do you obtain relevant instructions and locate relevant information in order to complete your responsibilities?
Question 12: What visual signals and communication equipment do you use and why?
Question 13: What is your role in workplace meetings?
KEY POINTS
The candidate’s response should evidence the following INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 9
Asks questions
Seeks guidance and clear instructions
Question 10
Asks questions and provided feedback
Listens and changes actions where necessary
Question 11
Refers regularly to site supervisor or similar
Obtains and interprets written instructions
Knows the whereabouts of senior personnel
Question 12
Utilises visual signals effectively
Uses work site communication devices
Question 13
Work instructions
Enterprise policies and procedures
Location of site office and senior personnel
Worksite meetings
Sign and barrier identification
General Construction terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 34 of 115 Version 1: January 2008
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Observes meeting procedures
Listens to instructions, takes notes and provides feedback
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 35 of 115 Version 1: January 2008
RECORD OF CONVERSATION Generic Component – Plans and specifications
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 14: How do site plans, building plans and specifications affect projects you have worked on and your role within the project?
Question 15: Describe a situation where amendments have been made to project drawings and the implications that this has had on your work.
KEY POINTS
The candidate’s response should evidence the following INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 14
Relates to the work to be undertaken and treats as visual instructions
Reads and translates drawings, dimensions, symbols and specifications
Provides detail of services and site preparation requirements
Provides location of physical site points based on drawings
Ascertains quality requirements
Question 15
Recognises changes to plans and what that means in respect to materials, equipment and own work role
Interprets sketches made from the plans and drawings
Drawings, plans and specifications
Enterprise policies and procedures
Australian Standards
Site location
General Construction terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 36 of 115 Version 1: January 2008
RECORD OF CONVERSATION Generic Components – Environmental
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 16: What considerations and protection provisions have you made for environmental conditions on a current or previous project?
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 16
Minimises clearing of trees and plants
Considers the well being of wildlife
Applies barriers to prevent loss of soil
Prevents the leaching of site substances into gutters and waterways
Manages waste efficiently
Keeps noise and dust to a minimum
Considers impact of noise on others and allowable hours
Environmental regulations
Enterprise policies and procedures
Local council by-laws
Site location
General Construction terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 37 of 115 Version 1: January 2008
RECORD OF CONVERSATION Generic Component – Clean up
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 17: Explain how you leave the worksite at the end of the day, how waste materials are disposed of and how equipment is stored.
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 17
Clears the work area of all waste
Disposes of waste in an environmentally friendly manner, recycles or reuses
Cleans, maintains, stores and secures equipment
Stores/stacks unused materials safely and securely
Painting tools and equipment are cleaned using correct solutions and stored safely
Checks tools and equipment for faults and reports them to supervisor
Secures the site
Environmental regulations
Manufacturer’s specifications
Enterprise policies and procedures
Safety procedures
General Construction terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 38 of 115 Version 1: January 2008
RECORD OF CONVERSATION BCGCM1001B Follow OH&S policies and procedures
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 18: In the case of an emergency what have you done and what procedures did you follow?
Question 19: How have you kept up to date with first aid techniques and CPR?
Question 20: When commencing a new project what do you do to make a risk assessment of the project?
Question 21: What are the enterprise and/or site evacuation procedures that you follow in case of an emergency?
Question 22: What fire fighting equipment will you select if the fire is electrically combusted?
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 18
Details emergency procedures
Nominates safety officer
Reports emergency to designated person
Question 19
Recites EAR and CPR
Locates first aid kit
Identifies accidents and reports them
Question 20
Assesses potential hazards
Recognises safety signs and symbols
Reports hazards to appropriate person
Ensures appropriate guarding of equipment is used
Advises others of hazard or risk
State & Territory legislation
WH&S legislation and regulations
Enterprise policies and procedures
Injury prevention
Personal protective equipment
Risk and hazard identification
Sign and barrier identification
General Construction terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 39 of 115 Version 1: January 2008
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Controls risk in accordance with safe workplace procedures
Completes incident reports
Question 21
Highlights gathering/mustering point
States the evacuation procedure
Recognises the most appropriate route of escape in the case of an emergency
Follows the enterprise evacuation plan
Question 22
Distinguishes which fire fighting equipment to use for the different types of fires
Reports fire and knows who to alert
Able to state procedures in attempting to bring the fire under control
Completes incident reports
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 40 of 115 Version 1: January 2008
RECORD OF CONVERSATION BCGCM1002B Work effectively in the General Construction Industry
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 23: Explain the scope, employment and economic importance of the General Construction industry and what that means to you?
Question 24: What is the structure of the organisation you work for and who do you report to?
Question 25: What are the employment conditions under which you are employed?
Question 26: When a dispute occurs with another crew member, what action do you take?
Question 27: What personal development activities have you entered into or are about to enter into?
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 23
Outlines what the General Construction Industry functions and services are
Provides examples of the economic importance of the General Construction Industry
Discusses employment opportunities and career paths
Awareness of trends occurring in the Industry
Question 24
Details the structure of the enterprise and functions of the organisation as a whole
Recognises the chain of command within the organisation
Question 25
Awareness of wage conditions and industrial award conditions
Awareness of obligations to self and employer
Question 26
Employment awards
Enterprise policies and procedures
Industry information
General Construction terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 41 of 115 Version 1: January 2008
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Works as part of a team and recommends improvements
Negotiates work assignments and who does what and why
Assists others to achieve mutual goals
Practices basic one to one dispute resolution skills
Discusses and listens to issues and concerns
Reports to a designated third party if arbitrator is required
Question 27
Assesses own requirements for enterprise and personal requirements
Requests or seeks learning opportunities
Participates in learning/training
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 42 of 115 Version 1: January 2008
RECORD OF CONVERSATION BCGCM1003B Plan and organise work
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: See Questions 5 to 8
RECORD OF CONVERSATION BCGCM1004B Conduct workplace communication
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: See Questions 9 to 13
RECORD OF CONVERSATION BCGCM2001B Read and interpret plans and specifications
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: See Questions 14 to 15
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 43 of 115 Version 1: January 2008
RECORD OF CONVERSATION BCGCM1005B Carry out measurements and calculations
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 28: What methods do you apply to obtain, confirm and record measurements?
Question 29: What quantity estimations and calculations have you been required to make on the project you are currently working on?
Question 30: In working out your project requirements what formulas did you use and what measurement conversions did you make?
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 28
Uses a tape measure, dumpy and laser level in various activities
Takes and checks measurements accurately using various devices
Question 29
Calculates areas, perimeters and volumes systematically
Makes estimations on the quantity of materials
Question 30
Applies formulas for the calculation of quantities, volumes and areas
Converts kilograms into grams, metres into millimetres and potentially imperial measurements into metric
Enterprise policies and procedures
Equipment protection
Material waste avoidance
General Construction terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 44 of 115 Version 1: January 2008
RECORD OF CONVERSATION BCGCM2008B Erect and dismantle restricted height scaffolding
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 31: What regulations and Australian Standards do you associate with utilising restricted height scaffolding?
Question 32: How would you calculate the load and inspect the safety and compliance of a scaffold intended to support up to 200kg at three metres high and a span of seven metres?
Question 33: Explain the type of scaffolding you have used and the erection and dismantling process.
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 31
States confines for restricted height scaffolding
Familiar with JSAs or SWMS
Acquires engineering design specifications
States Australian Standard for restricted height scaffolding
Question 32
Uses load tables
Question 33
States types – modular, Aframe, Hframe, tube and coupler, aluminium and fall protection
Determines access and egress points
Checks equipment for wear and footings for stability
Erects and dismantles in accordance with manufacturers specifications and load tables
Completes inspection log and handover
Restricted height scaffolding regulations
JSA or SWMS
Design specifications
Enterprise policies and procedures
OH&S policy
Australian Standards
Manufacturers specifications
Injury avoidance
General Construction terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 45 of 115 Version 1: January 2008
RECORD OF CONVERSATION BCGCM3001B Operate elevated work platforms
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 34: What are the important points about operating an elevated work platform safely?
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 34
Pre-start checks on EWP are carried out as per manufacturers recommendations to ensure: • leaks, damage and/wear is identified and reported • power source is connected and switched on as per
manufacturers recommendations • emergency safety devices are checked for
serviceability
Existing services in the vicinity are isolated and tagged to ensure safe work conditions
EWP is placed on a firm level surface free from obstructions and stabilisers set as per manufacturers recommendations
Tools and equipment are placed in platform securely in a toolbox or crate
Harness is checked and fitted
EWP controls are operated to manufacturers recommendations to raise and lower platform
EWP controls are locked when not in use while performing work
Work is carried out to specifications and safety requirements of operators manual and Company Policy
Shut down procedures are as per operators manual
Information is accessed to complete daily tasks
OH&S procedures are observed to avoid workplace injury
OH&S procedures are observed to avoid damage to the environment
Knowledge of general construction terminology
Avoiding material wastage
Avoiding workplace injury
Good housekeeping
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 46 of 115 Version 1: January 2008
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Existing services that were isolated are to have tags removed and put back into service and relevant persons notified that work is complete
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 47 of 115 Version 1: January 2008
RECORD OF CONVERSATION BCGPD2001B Handle painting and decorating materials
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 35: When new materials arrive on site, what considerations do you take account of and what procedures do you follow to handle them?
Question 36: What important procedures do you follow when handling hazardous materials?
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 35 Places material in planned location and checks for conformity
Handles painting and decorating materials and components safely and using effective handling techniques and stores within ventilated and product dispersal area
Sorts and stacks material in coordination of project requirements and protects from water damage and clear of traffic ways
Distributes materials to job locations Question 36 Identifies hazardous materials for separate handling and according to MSDS and stores in ventilated area which is fire safe and has dispersal provisions
Prepares work areas to protect surrounding surfaces and workers and checks for the possibility of spontaneous combustion
Protects and stores hazardous materials according to MSDS, sealing and storing any unused materials
Material or product order
Enterprise policies and procedures
OH&S policy
Injury avoidance
Working at height regulations
Handling of hazardous substances
Material Safety Data Sheets
Painting and Decorating terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 48 of 115 Version 1: January 2008
RECORD OF CONVERSATION BCGPD2002B Use painting and decorating tools and equipment
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 37: What hand, power and pneumatic tools have you used on projects and how do you check and maintain them?
Question 38: Detail any plant you have operated in the last six months and what maintenance procedures you followed.
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 37
Lists equipment used adequate to the occupation
States checking and maintenance procedures including topping up of fluids, serviceability and storage of equipment
Checks tools, leads and hoses for tags, serviceability and faults
Reports or rectifies any faults
Conducts pre-operational checks including guards, retaining bolts, couplings, gauges and controls
Question 38
Lists plant used and operating procedures
States maintenance procedures including topping up of fluids
Explains shut down and security of plant and associated tooling
Stores plant and tools safely and appropriately
Manufacturers specifications
Enterprise policies and procedures
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
Painting and Decorating terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 49 of 115 Version 1: January 2008
RECORD OF CONVERSATION BCGPD2003B Remove and replace doors, door and window furniture
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 39: Explain the procedures you have followed to remove and replace doors, door and window furniture.
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 39
Removes and stores screens, fittings, window furniture, door furniture and doors
Handles, places and hangs doors
Refits door furniture, window furniture and screens
Ensures no markings or damage on surfaces or surrounds
Manufacturers specifications
Enterprise policies and procedures
Australian Standards
Injury avoidance
OH&S policy
General Construction terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 50 of 115 Version 1: January 2008
RECORD OF CONVERSATION BCGPD3001B Prepare surfaces for painting
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 40: What considerations have you taken into account when preparing new or uncoated, previously coated or wallpapered surfaces for
painting or clear finishing?
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 40
Assesses new surfaces for painting and clear finishing
Selects surface preparation method and prepares surface in compliance with substrate requirements, stopping, filling and sanding any imperfections
Assesses condition of existing substrate and surface material, noting any potential hazards
Deals with any potential hazards safely and in accordance with instructions
Selects surface preparation method and prepares existing surface removing any unwanted coatings and loose debris, stopping, filling and sanding any imperfections
Assesses wallpaper condition and nature before removal and selects the removal method
Removes wallpaper and prepares surface for painting, stopping, filling and sanding any imperfections
Plans and specifications
Enterprise policies and procedures
Manufacturer specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
Painting and Decorating terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 51 of 115 Version 1: January 2008
RECORD OF CONVERSATION BCGPD3002B Apply paint by brush and roller
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 41: What preparation have you undertaken to ready the work area and materials when applying paint by brush or roller?
Question 42: How have you ensured that the paint is applied with brush and roller to meet requirements and finished to specification?
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 41
Prepares materials and substrate surfaces
Protects surrounding surfaces not to be painted with drop sheets, masking and removal of objects
Checks job location for adequate ventilation and risks of fire or explosion
Mixes correct amount of materials for specified paint finish to correct proportion and ratio for drying time and stirs thoroughly using stirring sticks
Question 42
Selects brush and/or roller for specified profile, size of area and type of paint or finish
Applies paint to achieve required level of opacity, finish, texture and sheen
Cures paint finish using recommended curing method and tests finished paint surface using prescribed testing procedures
Plans and specifications
Enterprise policies and procedures
Manufacturer specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
Painting and Decorating terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 52 of 115 Version 1: January 2008
RECORD OF CONVERSATION BCGPD3003B Apply texture coat paint finishes by brush, roller and spray
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 43: What preparation have you undertaken to ready the application area and materials when applying texture coat paint finishes?
Question 44: Explain the steps you have followed when applying texture coat by brush and roller.
Question 45: Outline the procedures you have followed when using spray equipment to apply texture coat.
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 43
Sets up area for application and protects adjoining surfaces by masking off or covering
Provides adequate ventilation and takes measures to reduce levels of dust and foreign matter
Prepares application system/equipment and checks fittings for function and security
Mixes and adjusts texture coat paint to allow for application process
Question 44
Applies texture coat paint to surfaces using correct technique, with an even finish with opacity and sheen level, correcting any defects in the coating
Question 45
Operates spray equipment to apply texture coat paint using correct application process, with and even finish with opacity and sheen level, correcting any defects in the coating
Plans and specifications
Enterprise policies and procedures
Manufacturers specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
Painting and Decorating terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 53 of 115 Version 1: January 2008
RECORD OF CONVERSATION BCGPD3004B Apply paint by spray
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 46: What preparation have you undertaken to ready the application area and materials when applying paint by spray?
Question 47: In preparation for spray painting, how have you set up and tested the equipment?
Question 48: Explain the steps you have followed to apply paint using a spray system.
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 46
Sets up area for application and protects adjoining surfaces by masking off or covering
Provides adequate ventilation and takes measures to reduce levels of dust and foreign matter
Mixes and adjusts viscosity to allow for application process
Question 47
Selects and sets up spray equipment components, accessories and lines and the operating location, checks fittings for function and security, tests safety devices and corrects defects
Question 48
Applies paint to surface using correct application technique, with and even finish with opacity and sheen level, correcting any defects in the coating
Discusses application of paint by conventional, airless and HVLP systems
Plans and specifications
Enterprise policies and procedures
Manufacturers specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
Painting and Decorating terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 54 of 115 Version 1: January 2008
RECORD OF CONVERSATION BCGPD3005B Match specified paint colour
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 49: What technical information and procedures have you considered when matching paint colours to a specific example?
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 49
Calculates base colour from analysis of sample
Verifies paint type, tint base and sheen level of sample
Selects colourants, mixes and matches colour against sample and allows to dry to check accuracy
Understands colour principles (monochromatic, complementary, split complementary, analogous, triadic colours)
Discusses colour theory (primary, secondary, tertiary and intermediate colours) and use of colour wheel
Specifies colour used in heritage painting or restoration
Discusses factors that affect paint
Mixes full quantity of paint and retests colour match prior to application
Plans and specifications
Enterprise policies and procedures
Manufacturers specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
OH&S policy
Painting and Decorating terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 55 of 115 Version 1: January 2008
RECORD OF CONVERSATION BCGPD3006B Apply stains and clear timber finishes
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 50: What preparation have you undertaken to ready the application area and materials when applying stains and clear timber finishes?
Question 51: Outline the steps you have followed to apply stain to bare timber surfaces.
Question 52: Outline the steps you have followed to apply clear finishes to surfaces.
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 50
Sets up area for application and protects adjoining surfaces by masking off or covering
Provides adequate ventilation and measures area for levels of dust and foreign matter
Question 51
Selects and prepares stain to proportion, for type of timber allowing for aesthetics and durability
Selects application method for specified surface, area size and type of finish and applies stain to bare timber surface
Selects, mixes and colour matches wood filler and putty and apples to timber
Question 52
Applies coats of selected clear finish to achieve required opacity, finish and sheen
Provides for coating to dry and cure
Plans and specifications
Enterprise policies and procedures
Manufacturers specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
General Construction terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 56 of 115 Version 1: January 2008
RECORD OF CONVERSATION BCGPD3007B Apply wallpaper
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 53: What preparation have you undertaken to prepare the surface when applying wallpaper?
Question 54: Explain the procedures you have utilised when preparing to hang and apply wallpaper.
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 53
Assesses condition, suitability and nature of existing substrate, identifies hazards and risk reduction procedures and selects wallpaper removal process
Prepares surfaces for wallpapering application by removing existing coating and loose debris, stops, fills and sands any defects or imperfections
Question 54
Plans hanging application, prepares adhesives and checks materials for conformity to dye lot, batch number and other shading requirements
Applies size coating to work area and applies wallpaper ensuring an even surface, seams are butted, paper is plumb and pattern is free of defects
Trims around fittings accurately
Plans and specifications
Enterprise policies and procedures
Manufacturers specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
Painting and Decorating terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 57 of 115 Version 1: January 2008
RECORD OF CONVERSATION BCGPD3008B Apply decorative paint finishes
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 55: What preparation have you undertaken to ready the application area when applying decorative paint finishes?
Question 56: How have you applied mirror paint finishes?
Question 57: How have you applied broken colour effects?
Question 58: How have you produced imitation marble and imitation wood grain effects?
Question 59: How have you applied stencils?
Question 60: How have you applied lining by brush?
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 55
Sets up area for application and protects adjoining surfaces by masking off or covering
Provides adequate ventilation and takes measures to reduce levels of dust and foreign matter
Question 56
Adjusts paint viscosity to suit climatic conditions and method of application
Applies prime and intermediate coats, allows to dry, sands to an even smooth finish and applies final coat without imperfections to an even and smooth finish
Question 57
Applies ground coat to specified colour and consistency
Applies scumble glaze to ground coat and produces desired broken colour effect
Applies clear coating to an even finish and desired sheen
Plans and specifications
Enterprise policies and procedures
Manufacturers specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
Painting and Decorating terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 58 of 115 Version 1: January 2008
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
level
Question 58
Applies ground coat to specified colour and consistency
Marbling or wood graining medium are mixed to desired proportion and colour and applied to produce veins and markings or grain markings
Adds highlights to match sample
Applies clear coating to an even finish and desired sheen level
Question 59
Selects stencil layout and uses specified transfer method to cut accurately for multiple colours using a ‘register’ mark
Places and tapes initial stencil to design location, applies paint to produce first colour, applies subsequent stencils with each separate colour to produce the designed finish
Question 60
Selects lining work and sets out design effect on prepared surface
Selects paint materials, applicators and brushes suitable to the lining application and applies the specified techniques to achieve the desired effect and finish
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 59 of 115 Version 1: January 2008
RECORD OF CONVERSATION BCGPD3011B Treat lead paint hazards
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 61: What preparation have you undertaken to define and ready the work area when treating lead paint hazards?
Question 62: Outline the procedures you have followed to remove and encapsulate the contaminated materials.
Question 63: Specify what procedures you have followed to deal with lead paint hazard waste and check for contamination.
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 61
Assesses circumstances in which lead based paints may be encountered and verifies location of lead based paint treatment
Undertakes testing using approved methods and verifies options for the management and treatment of pre-existing lead based paints
Maintains a safe working area around lead based paint locations using temporary measures such as barriers and signage and positions plant, equipment and tools to suit job requirements
Question 62
Quarantines contamination area and selects removal process
Protects furniture, all surfaces, ground areas, water storage, drinking vessels and foodstuffs, seals windows and doors
Verifies waste management procedures for lead contamination from flake, chalk and dust
Applies removal process and contaminated materials are containerised for movement
Plans and specifications
Enterprise policies and procedures
Manufacturers specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
Hazardous materials data
General Construction terminology
Painting and Decorating terminology
PPE
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 60 of 115 Version 1: January 2008
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Repairs and restores substrate with subsequent coatings
Assesses stabilisation method to make the building lead safe by applying temporary control measures and assessing methods for the containment of existing surfaces
Conducts over painting using oil based paints and applying a high quality undercoat sealer and two coats of quality topcoats
Applies specialised liquid encapsulant and encloses contaminated surface using overlaying material such as plasterboard or weatherboard and applying warning signs of the latent lead hazard
Question 63
Removes waste and unwanted materials and places into containment vessels for disposal
Tests soil and surface to verify that no contamination has taken place and building is safe for occupation
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 61 of 115 Version 1: January 2008
RECORD OF CONVERSATION BCGPD3009B Remove graffiti and apply protective coatings
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 64: What preparation have you undertaken to prepare the site and materials when removing graffiti and applying protective coatings?
Question 65: When removing graffiti what aspects have you taken into consideration?
Question 66: Outline the application process you have followed to apply preventative application materials.
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 64
Sets up area for application and protects adjoining surfaces by masking off or covering
Provides adequate ventilation and takes measures to reduce levels of dust and foreign matter
Question 65
Selects preparation processes to suit substrate surfaces and graffiti circumstances
Assesses type of coating previously used to cover graffiti
Applies graffiti removal processes to the affected area
Question 66
Cleans substrate surfaces and prepares for preventative application coatings
Assesses type of coating to cover the specific type of graffiti and applies preventative application coating to cover the graffiti
Plans and specifications
Enterprise policies and procedures
Manufacturers specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
Hazardous materials data
Painting and Decorating terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 62 of 115 Version 1: January 2008
RECORD OF CONVERSATION BCGPD3010B Apply protective paint coating systems
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 67: When applying protective coatings, what preparation do you undertake, what have you done with surface imperfections, what
methods of application do you follow and how do you test the coating?
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 67
Checks suitability of surface for protective coating and the preparation method
Prepares surface to specifications in compliance with substrate requirements
Repairs, stops, fills and sands to smooth any imperfections ready for protective coatings
Checks job location for adequate ventilation and precautions of fire or explosion
Selects application to suit job, type of paint, type of surface conditions and climatic considerations
Applies and finishes the protective coating
Tests using dry and wet methods
Plans and specifications
Enterprise policies and procedures
Manufacturer specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
Painting and Decorating terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 63 of 115 Version 1: January 2008
RECORD OF CONVERSATION BCGPD3012B Apply advanced wallpaper techniques
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 68: What preparation have you undertaken to prepare the surface when applying wallpaper using advanced techniques?
Question 69: Explain the advanced techniques you have utilised when preparing to hang and apply wallpaper.
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 68
Assesses condition, suitability and nature of existing substrate, identifies hazards and risk reduction procedures and selects wallpaper removal process
Prepares surfaces for wallpapering application by removing existing coating and loose debris, stops, fills and sands any defects or imperfections
Question 69
Plans hanging application , prepares adhesives and checks speciality materials for conformity to dye lot, batch number and other shading requirements
Applies size coating to work area and applies speciality wallpaper ensuring an even surface, seams are butted, paper is plumb and pattern is free of defects
Trims around fittings accurately
Plans and specifications
Enterprise policies and procedures
Manufacturers specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
Painting and Decorating terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 64 of 115 Version 1: January 2008
RECORD OF CONVERSATION BCGSP3003B Apply trowelled texture coat finishes
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 70: How do you prepare the surface area, mix and apply materials for a textured coat finish to a surface?
Question 71: Detail the process you would use to finish and cure the texture coat.
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 70 Prepares substrate, mixes dash coat and applies liberally to prepared substrate
Mixes texture coating materials to designated proportions and to manufacturers specifications
Applies texture coat to surfaces with a trowel to correct thickness and manufacturers recommendations
Question 71
Finishes texture coat to plumb/level
Cures texture coat in accordance with manufacturers recommendations
Plans and specifications
Enterprise policies and procedures
Manufacturers specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
General Construction terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 65 of 115 Version 1: January 2008
RECORD OF CONVERSATION BSBSBM301A Research business opportunities
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 72: In considering your own business opportunities, what would you consider to be your personal business skills and business
opportunities?
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 72
Investigates own business opportunities and feasibility of the business viability
Consults with specialist services and reviews emerging technologies and alternative business methodologies
Assesses risks, returns and resources
Reviews own financial, business and technical skills
Assesses own personal skills and attributes against those necessary to operate the business
OH&S policy
Business principles
Principles of risk management
Research skills
Relevant industry codes of practice
General Construction terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 66 of 115 Version 1: January 2008
RECORD OF CONVERSATION LMFGG2008B Glaze/reglaze residential windows and doors
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 73: When preparing for a project, what site conditions, glass and frame requirements have you looked for before deciding on product and
installation method?
Question 74: Explain the procedures you have used to perform glazing on a recent project.
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 73
Assesses on site difficulties, protection of fixtures and fittings and any special characteristics of the window or door
Plans work sequence, tools, equipment and materials – glass type (to order, security, noise or light control, type, size and imperfections)
Selects fixing methods taking into account specification, type of glass and frame, security, sealing method and frame condition
Question 74
Checks size against specification, removes old glass and sealant, cleans and prepares surface
Installs glass and fixes to position
Applies solvents and sealers, then cleans
OH&S policy
Glass handling and movement procedures
Building plans
Enterprise policies and procedures
Australian Standards
Building Code of Australia
Material Safety Data Sheets
General Construction terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 67 of 115 Version 1: January 2008
RECORD OF CONVERSATION MEM08012B Prepare surfaces by abrasive blasting (basic)
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 75: How have ascertained the job requirements, set up the equipment and prepared surfaces when using abrasive blasting techniques
and what procedures did you follow on completion?
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 75
Verifies work requirements from job sheet, instructions and specifications
Assesses appropriate abrasive blasting process, equipment and media for surface preparation, prepares the worksite by cleaning, prepares consumables and sets up equipment
Selects correct rust inhibitor for use in wet abrasive blasting
Conducts pre-operational checks on equipment, rectifies and reports any faults
Operates blasting equipment allowing for emergency shut down and completes work to environmental requirements
Disposes of abrasive media, cleans, disassembles and inspects blasting equipment, recording and reporting any faults
Assesses prepared surface for cleanliness and conformance t o specifications, faults or defects are rectified and inspection results recorded and reported
Plans and specifications
Enterprise policies and procedures
Manufacturer specifications
Material Safety Data Sheets
Australian Standards
Environmental requirements
Injury avoidance
General Construction terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 68 of 115 Version 1: January 2008
RECORD OF CONVERSATION MEM08013B Prepare surfaces by abrasive blasting (advanced)
CANDIDATE’S NAME: ASSESSOR’S NAME: DATE: Question 76: How have ascertained the job requirements, set up the equipment and prepared surfaces when using abrasive blasting advanced
techniques and what procedures did you follow on completion?
KEY POINTS The candidate’s response should evidence the following
INDUSTRY REQUIREMENTS These must be evidenced in the
candidate’s response
Indicate if response addresses KP and IR
COMMENTS Record other key points and examples from conversation.
Identify whether a practical assessment is warranted.
Question 76
Verifies work requirements from job sheet, instructions and specifications
Assesses appropriate abrasive blasting process, equipment and media for surface preparation, prepares the worksite by cleaning, prepares consumables and sets up equipment
Selects correct rust inhibitor for use in wet abrasive blasting
Conducts pre-operational checks on equipment, rectifies and reports any faults
Inspects work piece prior to cleaning and verifies any faults or defects requiring remedial or pre-treatment action
Operates blasting equipment allowing for emergency shut down and completes work to environmental requirements
Disposes of abrasive media, cleans, disassembles and inspects blasting equipment, recording and reporting any faults
Assesses prepared surface for cleanliness and conformance t o specifications, faults or defects are rectified and inspection results recorded and reported
Plans and specifications
Enterprise policies and procedures
Manufacturer specifications
Material Safety Data Sheets
Australian Standards
Environmental requirements
Injury avoidance
General Construction terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 69 of 115 Version 1: January 2008
SECTION D
Practical Tasks and Observation Recording
Sheets You use this section to assist you in determining a candidate’s competency in those areas where they have not yet successfully demonstrated their skills, knowledge and prior experience. Therefore, candidates are not required to complete all tasks. You select tasks after considering available evidence collected through previous phases and according to context and needs of each candidate.
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 70 of 115 Version 1: January 2008
PRACTICAL TASKS Candidates are not required to complete all tasks. The Assessor is to select tasks after considering available evidence collected through previous phases and according to the context and needs of each candidate. However, the Generic Components of Occupational Health and Safety, Plan and prepare, Communication, Plans and specifications, Environmental and Clean up are all inherent to the tasks listed below. Unit of Competency
Practical Task
BCGCM1001B
Follow OH&S policies and procedures
Task 1
A fire has started on your job site, show how you would execute emergency evacuation of the site, select fire fighting equipment to extinguish the fire and ensure safety within enterprise policies and procedures
BCGCM1002B
Work effectively in the General Construction Industry
Task 2
Find the site office, site supervisor and negotiate your daily workload with supervisor and team members via a site meeting, responding positively to any conflict situations.
BCGCM1003B
Plan and organise work
Included with Generic Components
BCGCM1004B
Conduct workplace communication
Included with Generic Components
BCGCM1005B
Carry out measurements and calculations
Task 3
Complete a small building project and use measurements and calculations to complete the task, including: length, perimeter, area, volume, gradient, conversion of metres to millimetres, estimation of quantities and formulas for material mixing using a rule and tape measure.
This could be completed in conjunction with another relevant unit.
BCGCM2001B
Read and interpret plans and specifications
Included with Generic Components
BCGCM2008B
Erect and dismantle restricted height scaffolding
Task 4
Plan, erect, check for wear and dismantle a modular scaffolding system with three (3) bays (one with a return), one (1) lift ladder, fall or edge protection, in accordance with JSAs/SWMS and regulations.
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 71 of 115 Version 1: January 2008
Unit of Competency
Practical Task
BCGCM3001B
Operate elevated work platforms
Task 5
Operate an elevated work platform to perform predetermined work.
BCGPD2001B
Handle painting and decorating materials
Task 6
Complete the safe and effective identification, handling, storage and distribution of painting and decorating materials which are to include a range of coatings and two each of:
• cleaning solvents
• fillers
• adhesives
This could be completed in conjunction with another relevant unit.
BCGPD2002B
Use painting and decorating tools and equipment
Task 7
Complete tasks, follow work instructions and operating procedures to use the listed painting and decorating tools and equipment including: scrapers, filling knives/blades, putty knives, duster brushes, hand sanders, paint stirrers, drop sheets, heat guns, wire brushes, hammers, nail punches, paint pots/buckets, brush-ware and brush-ware accessories, roller frames, covers, buckets and roller accessories.
Mechanical sanders may include random orbital, orbital, disc and belt.
Plant and equipment may include conventional spray equipment (compressor), airless spray equipment and water blasters.
This could be completed in conjunction with another relevant unit.
BCGPD2003B
Remove and replace doors, door and window furniture
Task 8
Complete the safe and effective removal and replacement of a minimum of:
• one door with an independent screen
• the furniture from two different door types
• the furniture from two different window types with at least one having independent screens.
BCGPD3001B
Prepare surfaces for painting
Task 9
Complete the preparation to specification of a minimum of three previously coated surfaces for painting with one being an external timber surface, one metal surface and at least one being an internal surface.
Complete the removal of wallpaper from a room/cubicle or equivalent and the preparation of the surface for painting.
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 72 of 115 Version 1: January 2008
Unit of Competency
Practical Task
BCGPD3002B
Apply paint by brush and roller
Task 10
Complete the minimum application of paint by brush and roller including:
• four different applications
• a minimum of three different surface types
• at least one application type for each of brush and roller
Undertake all with finishes being to specification including in terms of defects, thickness, colour, level of opacity, finish, texture and sheen.
BCGPD3003B
Apply texture coat paint finishes by brush, roller and spray
Task 11
Complete the preparation and application to specification of texture coat paints using brush and roller and either spray or one other applicator system.
BCGPD3004B
Apply paint by spray
Task 12
Complete the application of paint by spray using the following systems:
• Conventional
• Airless
• HVLP
Undertake all with finishes being to specification including in terms of defects, thickness, sheen, opacity, colour and sharpness.
BCGPD3005B
Match specified paint colour
Task 13
Colour match a minimum of two solvent-based and two latex/acrylic paints to specification.
BCGPD3006B
Apply stains and clear timber finishes
Task 14
Complete the application of stains and clear timber finishes to a minimum cover including:
• one oil-based stain product
• one water and spirit-based timber stain
• one water-based clear finish
• one oil-based clear finish
• grain filler application
• putty application
Undertake with finishes being to specification including in terms of defects, colour, level of opacity, finish and sheen.
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 73 of 115 Version 1: January 2008
Unit of Competency
Practical Task
BCGPD3007B
Apply wallpaper
Task 15
Apply wallpaper to specification on a minimum of three jobs covering:
• lining paper, vinyl wallpaper and un-pasted wallpaper
• walls with internal and external corners, reveal, window and arch
• walls containing power points and switches.
BCGPD3008B
Apply decorative paint finishes
Task 16
Complete to specification the following decorative finishes:
• a mirror finish to a minimum of a door or standard panel
• a minimum of two broken colour effects on walls or standard panel size surfaces
• a minimum of one marble graining effect on a standard panel size surface
• a minimum of one wood graining effect on a standard panel size surface
• the design and cutting of a multi-plate stencil and at least two applications of the stencil
• the use of lining within a decorative finish.
BCGPD3011B
Treat lead paint hazards
Task 17
Complete the application of treatments for a minimum of two different lead paint hazards including:
• a chemical stripping treatment and
• an encapsulation treatment.
Complete where the processes and outcomes are to be in accordance with current regulations and relevant Australian Standards.
BCGPD3009B
Remove graffiti and apply protective coatings
Task 18
Remove graffiti from two different substrates using two approved cleaning methods.
Apply a minimum of one sacrificial and one non-sacrificial preventative coating, each to a different substrate.
BCGPD3010B
Apply protective paint coating systems
Task 19
Complete the preparation and application of a minimum of three different protective paint coating systems to specification.
BCGPD3012B
Apply advanced wallpaper techniques
Task 20
Apply specialty wallpaper to specification on a minimum of two jobs covering one anaglypta and one other with surfaces containing power points, vents and switches.
BCGSP3003B
Apply trowelled texture coat finishes
Task 21
Complete the preparation for and application to specification of a minimum of two different types of texture coat finishes.
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 74 of 115 Version 1: January 2008
Unit of Competency
Practical Task
BSBSBM301A
Research business opportunities
Task 22
Evaluate the results of research and assess the likely viability and practicability of a business opportunity, taking into account the current business/ market climate and resources available.
LMFGG2008A
Glaze/reglaze residential windows and doors
Task 23
Glaze the following:
• timber putty faced and beaded window sashes including fixed, sliding, double hung, casement and awning sashes
• metal channel and beaded window sashes including fixed, sliding, double hung, casement and awning sashes
• timber putty faced and beaded doors including fixed, sliding, hinged, pivot and bi-fold doors
• metal channel and beaded doors including fixed, sliding, hinged, pivot and bi-fold doors
to include the following details for each:
• select glass thickness and type in accordance with AS1288
• calculate glazing clearance and cutting size
• cut glass to AS4667 Quality requirements for cut to size and processed glass
• select glazing tools, equipment, glazing sealants, vinyls and tapes
• prepare working area
• prepare glazing rebates and channels prior to installation
• clean glass, tools, equipment and work area
• calculate the cost of glass, glazing materials and labour.
Reglaze timber and metal windows and doors including
• prepare work area and drop sheets
• select reglazing tools and equipment
• hack out/remove beads and glass safely from timber windows and doors
• remove and disassemble metal window sashes and doors and remove glass safely
• select glass thickness and type in accordance with AS1288
• calculate glazing clearance and cutting size
• cut glass to industry standards AS4667
• select glazing tools, equipment, glazing sealants, vinyls and tapes
• glaze timber and metal windows and doors
• install sash cords, unique and spring balances on timber and metal double hung windows
• clean glass, tools, equipment and work area.
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 75 of 115 Version 1: January 2008
Unit of Competency
Practical Task
MEM08012B
Prepare surfaces by abrasive blasting (basic)
Task 24
Set up equipment and prepare surfaces for basic abrasive blasting procedures including:
• set up of essential plant and equipment
• routine maintenance tasks
• consideration of health and safety attributes.
MEM08013B
Prepare surfaces by abrasive blasting (advanced)
Task 25
Set up equipment and prepare surfaces for advanced abrasive blasting procedures including:
• set up of essential plant and equipment
• routine maintenance tasks
• consideration of health and safety attributes.
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 76 of 115 Version 1: January 2008
OBSERVATION RECORDING SHEET Practical Tasks
CANDIDATE’S NAME: SIGNATURE: DATE: ASSESSOR’S NAME: SIGNATURE: DATE: LOCATION: NB: The skills listed below must be verified by a competent assessor through observed demonstration either in the candidate’s workplace as part of the candidate’s normal work duty OR as part of a practical assessment/demonstration set by the assessor.
Unit and element
covered in task
Task No.
Observable behaviours in task Industry requirements Assessor’s comments Indicate if behaviour observed
Date assessed
* Note: These Generic Components should be taken into account with any other units being assessed. GC - Generic Components as well as units:
BCGCM1003B
BCGCM1004B
BCGCM2001B
*Note
• Applies WH&S principles to all work
• Applies enterprise policies and procedures to all work
• Follows safety instructions where provided
• Notices and reports hazards
• Establishes signs and barriers appropriate to the work being conducted
• Produces job plans and sets out sequence of activities
• Works comfortably with other crew members
• Priorities work and adapts well to problem situations
• Asks questions of supervisors and colleagues
• Discusses problems with supervisors, colleagues and industry representatives
• Obtains instructions from supervisors, gives and receives feedback
• Uses visual signals to direct other workers or machinery operators
• Attends workplace meetings, listens and participates
• Follows building plans and specifications
WH&S legislation and regulations
Enterprise policies and procedures
Injury avoidance
Personal protective equipment
Risk and hazard identification
Sign and barrier identification
General Construction terminology
Plans, acquires and uses resources
Set priorities
Teamwork
Work instructions
Location of site office and senior personnel
Worksite meetings
Drawings, plans and
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 77 of 115 Version 1: January 2008
Unit and element
covered in task
Task No.
Observable behaviours in task Industry requirements Assessor’s comments Indicate if behaviour observed
Date assessed
• Interprets drawing dimensions, symbols, keys and amendments
• Considers and acts on environmental friendly working methods
• Leaves the worksite clear of debris and waste and stores equipment
specifications
Australian Standards
Site location
Environmental regulations
Local council by-laws
Manufacturers specifications
Safety procedures
State & Territory legislation
BCGCM1001B
Follow OH&S policies and procedures
1 • Selects the correct fire fighting equipment to match the fire
• Removes the safety pin and directs nozzle at base of fire
• Evacuates to correct point
• Takes into account hazards, risks, enterprise policy and procedures
WH&S legislation and regulations
Enterprise policies and procedures
Injury avoidance
Personal protective equipment
Risk and hazard identification
Sign and barrier identification
General Construction terminology
BCGCM1002B
Work effectively in the General Construction Industry
2 • Locates the site office, site supervisor, discusses and receives instructions
• Attends site meetings, discusses issues with crew members and uses conflict resolution skills in conflict situations
Employment awards
Enterprise policies and procedures
Industry information
General Construction terminology
BCGCM1005B
Carry out measurements and calculations
3 • Measures and checks all measurements with a tape measure and rule
• Calculates perimeter and area of site
• Uses formulas to calculate volumes, gradients and conversion of materials and slopes of undulations
• Estimates quantities for mixing materials
Enterprise policies and procedures
Equipment protection
Material waste avoidance
General Construction terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 78 of 115 Version 1: January 2008
Unit and element
covered in task
Task No.
Observable behaviours in task Industry requirements Assessor’s comments Indicate if behaviour observed
Date assessed
BCGCM2008B
Erect and dismantle restricted height scaffolding
4 • Checks scaffolding equipment for wear and defective parts
• Checks footings for stability
• Uses load charts to calculate construction type and method
• Erects the scaffold safely and being mindful of surrounding workers
• Inspects and hands over for certification
• Dismantles the scaffold safely and being mindful of surrounding workers
• Marks defective equipment and sets aside for disposal
Restricted height scaffolding regulations
JSA or SWMS
Design specifications
Enterprise policies and procedures
OH&S policy
Australian Standards
Manufacturers specifications
Injury avoidance
General Construction terminology
BCGCM3001B
Operate elevated work platforms
5 • OH&S legislation sourced and interpreted
• Company policies e.g. environmental, confined space, emergency etc are sourced and interpreted
• Standard work procedures for operating elevated work platforms are sourced and interpreted
• PPE is selected and correctly fitted
• Signage and barricades required are identified and set out as per Company Policy
• Plant, tools and equipment selected are consistent with job requirements
• Tagging out procedures of existing services are followed to ensure safe work environment
• Pre-start checks are conducted as per operators manual
• Power source is determined and connected as per operators manual and switched on
• Safety devices are checked for serviceability
• Controls are checked for serviceability
• Work area is level and free from obstructions
• EWP is positioned to ensure work area is accessible
Regulations pertaining to the safe use, storage and security of elevated work platforms
Working at height regulations
Working around power lines
Enterprise policies and procedures
OH&S policy
Manufacturers specifications
Injury avoidance
General Construction terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 79 of 115 Version 1: January 2008
Unit and element
covered in task
Task No.
Observable behaviours in task Industry requirements Assessor’s comments Indicate if behaviour observed
Date assessed
• Stabilisers are securely positioned on a firm surface
• Necessary tools and equipment are securely placed in platform
• Harness is checked and securely fitted and attached to EWP
• Platform controls are checked for correct operation
• Base controls are isolated
• Work performed in a safe manner
• EWP lowered safely
• Shut down procedures are followed
• Tags removed from services
• Work area is cleaned and materials are disposed of as per Company Policy
• Tools, plant and equipment are cleaned, checked and stored appropriately
BCGPD2001B
Handle painting and decorating materials
6 • Moves materials safely
• Stores, sorts and stacks material
• Checks storage area for adequate ventilation, fire safety and dispersal
• Protects materials from physical and water damage
• Disposes waste and surplus materials following regulations
• Handles hazardous and non toxic materials separately following workplace procedures
• Prepares work area
Material or product order
Enterprise policies and procedures
OH&S policy
Injury avoidance
Material Safety Data Sheets
General Construction terminology
BCGPD2002B
Use painting and decorating tools and equipment
7 • Uses all regular painting and decorating tools and equipment appropriately
• Maintains and stores equipment after use
• Uses basic pieces of plant in accordance with operating instructions
Manufacturers specifications
Enterprise policies and procedures
Australian Standards
Injury avoidance
Working at height regulations
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 80 of 115 Version 1: January 2008
Unit and element
covered in task
Task No.
Observable behaviours in task Industry requirements Assessor’s comments Indicate if behaviour observed
Date assessed
OH&S policy
General Construction terminology
BCGPD2003B
Remove and replace doors, door and window furniture
8 • Removes screens, window furniture, door furniture and doors, storing all
• Hangs and fixes doors into place
• Refits door and window furniture and fixes back into place
• Replaces screens securely
Plans and specifications
Enterprise policies and procedures
Manufacturer specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
General Construction terminology
BCGPD3001B
Prepare surfaces for painting
9 • Assesses suitability of the surface for painting or clear finish application
• Checks condition and nature of existing substrate and surface material
• Verifies hazards and procedures for reducing risks
• Selects and prepares surface preparation method
• Stops, fills and sands surface imperfections
• Prepares surfaces by removing unwanted coatings and loose debris
• Assesses the type, nature and condition of existing wallpaper
• Removes wallpaper
• Prepares surfaces for painting
Plans and specifications
Enterprise policies and procedures
Manufacturer specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
General Construction terminology
BCGPD3002B
Apply paint by brush and roller
10 • Prepares materials and substrate
• Protects surrounding surfaces using drop sheets, masking off and removing objects
Plans and specifications
Enterprise policies and procedures
Manufacturer specifications
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 81 of 115 Version 1: January 2008
Unit and element
covered in task
Task No.
Observable behaviours in task Industry requirements Assessor’s comments Indicate if behaviour observed
Date assessed
• Checks job location for adequate ventilation
• Mixes material to proportion and the correct ratio for drying
• Stirs paint and colours through thoroughly
• Selects, brush, roller or combination and applies paint to required level of opacity, finish, texture and sheen
• Cures paint finish and tests surface
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
General Construction terminology
BCGPD3003B
Apply texture coat paint finishes by brush, roller and spray
11 • Sets up area for application and prepares adjoining surfaces, masking off prior to application
• Checks for adequate ventilation and takes measures to ensure area remains free of dust and foreign matter
• Prepares application system and checks fittings for function and security
• Mixes texture coat paint and adjusts for application
• Uses application equipment and applies texture coat paint to surface using correct application technique
• Operates spray equipment and applies texture coat paint
• Checks for defects in coating and takes corrective action to achieve desired finish
Plans and specifications
Enterprise policies and procedures
Manufacturer specifications
Material Safety Data Sheets
Australian Standards
AS2311
Injury avoidance
Working at height regulations
OH&S policy
General Construction terminology
BCGPD3004B
Apply paint by spray
12 • Sets up area for application and prepares adjoining surfaces, masking off prior to application
• Checks for adequate ventilation and takes measures to ensure area remains free of dust and foreign matter
• Prepares application system and checks fittings for function and security
• Mixes paint and adjusts viscosity for application
• Selects and sets up spray equipment components, accessories and lines, checks fittings for function and security
• Tests safety devices
• Operates spray equipment and apply paint using correct technique
Plans and specifications
Enterprise policies and procedures
Manufacturer specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
General Construction terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 82 of 115 Version 1: January 2008
Unit and element
covered in task
Task No.
Observable behaviours in task Industry requirements Assessor’s comments Indicate if behaviour observed
Date assessed
• Checks for defects and takes corrective action to rectify
BCGPD3005B
Match specified paint colour
13 • Verifies base colour from analysis of sample
• Assesses paint type, tint base and sheen level of sample
• Selects colourant and mixes colour to match sample
• Mixes full quantity of paint
Plans and specifications
Enterprise policies and procedures
Manufacturer specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
General Construction terminology
BCGPD3006B
Apply stains and clear timber finishes
14 • Sets up area for application and prepares adjoining surfaces, masking off prior to application
• Checks for adequate ventilation and takes measures to ensure area remains free of dust and foreign matter
• Selects stain for type of timber allowing for aesthetics and durability
• Prepares stain to proportion and consistency
• Selects application method and applies stain to bare timber
• Selects wood filler and putty, mixes and matches to colour
• Applies coats of selected clear finish to achieve opacity, finish and sheen
• Allows to dry between coats and cures clear finish
Plans and specifications
Enterprise policies and procedures
Manufacturer specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
General Construction terminology
BCGPD3007B
Apply wall paper
15 • Checks condition, suitability and nature of existing substrate
• Verifies hazards and procedures to reduce risk
• Prepares surfaces for wallpapering
• Repairs surface defects and imperfections, stops, fills and sands to a smooth finish
Plans and specifications
Enterprise policies and procedures
Manufacturer specifications
Material Safety Data Sheets
Australian Standards
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 83 of 115 Version 1: January 2008
Unit and element
covered in task
Task No.
Observable behaviours in task Industry requirements Assessor’s comments Indicate if behaviour observed
Date assessed
• Plans hanging application of material
• Selects adhesives and check material for conformity to dye lot, batch number and shading
• Applies size coating
• Applies wallpaper and materials
• Trims around fittings
• Completes wallpaper and speciality material
Injury avoidance
Working at height regulations
OH&S policy
General Construction terminology
BCGPD3008B
Apply decorative paint finishes
16 • Sets up area for application and prepares adjoining surfaces, masking off prior to application
• Checks for adequate ventilation and takes measures to ensure area remains free of dust and foreign matter
• Adjusts paint viscosity to suit climatic conditions
• Applies mirror paint prime and intermediate coats and allows to dry
• Applies mirror paint final coat without imperfections evenly and smoothly
• Applies ground coat for broken colour effects
• Applies scumble glaze to produce broken colour effect
• Applies clear coating to achieve even finish and sheen
• Applies ground coat for marble effect
• Mixes marbling medium to designed proportion and colour producing veins and markings
• Applies clear coating to achieve even finish and sheen
• Applies ground coat for wood grain effect
• Mixes wood grain medium to designed proportion and colour producing veins and markings
• Adds highlight and applies clear coating to achieve even finish and sheen
• Lays out stencil design and transfers design cut for multiple colours using a ‘register’ mark
• Places initial stencil, tape design and apply paint
Plans and specifications
Enterprise policies and procedures
Manufacturer specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
General Construction terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 84 of 115 Version 1: January 2008
Unit and element
covered in task
Task No.
Observable behaviours in task Industry requirements Assessor’s comments Indicate if behaviour observed
Date assessed
• Locates subsequent stencils to pattern and applies colours to the desired finish
• Selects lining work set out to designed effect
• Selects paint materials, applicators and brush
• Applies application techniques to produce designed lining work
BCGPD3011B
Treat lead paint hazards
17 • Assesses circumstances and locations in which lead based paints may be encountered
• Undertakes testing of lead based paint
• Assesses options for the treatment of lead based paints in buildings
• Maintains a safe working area around the lead based paint by setting up barriers and signs
• Positions plant, tools and equipment
• Verifies removal processes to suit job
• Quarantines contaminated area
• Protects furnishings, surfaces, ground areas, drinking vessels, water storage and foodstuffs
• Employs waste management procedures for flake, chalk and dust
• Applies waste management and containerises contaminated materials
• Repairs and restores substrate
• Employs temporary control measures to stabilise the building and confirms methods of containment
• Conducts over painting using oil based paints
• Applies undercoat sealer and top coats
• Applies liquid encapsulant
• Encloses contaminated surface using overlaying materials
Plans and specifications
Enterprise policies and procedures
Manufacturer specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
Hazardous material data
General Construction terminology
BCGPD3009B
Remove graffiti
18 • Sets up area for application and prepares adjoining surfaces, masking off prior to application
Plans and specifications
Enterprise policies and
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 85 of 115 Version 1: January 2008
Unit and element
covered in task
Task No.
Observable behaviours in task Industry requirements Assessor’s comments Indicate if behaviour observed
Date assessed
and apply protective coatings
• Checks for adequate ventilation
• Selects preparation process to suit substrate and graffiti circumstances
• Verifies type of coating previously used to cover graffiti
• Applies graffiti removal process to the affected area
• Cleans surface substrate for preventative application coatings
• Prepares preventative application coatings
• Applies preventative application coatings to cover specific type of graffiti
procedures
Manufacturer specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
Hazardous material data
General Construction terminology
BCGPD3010B
Apply protective paint coating systems
19 • Matches protective coating to surface and selects surface preparation method, prepares surface and repairs, stops, fills and sands smooth and surface imperfections
• Checks job location for adequate ventilation and precautions of fire or explosion
• Selects protective coating system application to suit job, type of paint, type and condition of surface and climatic conditions
• Applies and finishes protective coating system
• Conducts dry and wet tests on the protective coating
Plans and specifications
Enterprise policies and procedures
Manufacturer specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
General Construction terminology
BCGPD3012B
Apply advanced wallpaper techniques
20 • Checks condition, suitability and nature of existing substrate
• Verifies hazards and procedures to reduce risk
• Prepares surfaces for wallpapering
• Repairs surface defects and imperfections, stops, fills and sands to a smooth finish
• Plans hanging application of speciality material
• Selects adhesives and check material for conformity to dye lot, batch number and shading
Plans and specifications
Enterprise policies and procedures
Manufacturer specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 86 of 115 Version 1: January 2008
Unit and element
covered in task
Task No.
Observable behaviours in task Industry requirements Assessor’s comments Indicate if behaviour observed
Date assessed
• Applies size coating
• Applies wallpaper and speciality materials
• Trims around fittings
• Completes wallpaper and speciality material
General Construction terminology
BCGSP3003B
Apply trowelled texture coat finishes
21 • Prepares materials and substrate
• Mixes dash coat and applies liberally to wetted surface
• Mixes texture coating materials to designated proportions and specifications
• Applies texture coat to specifies surfaces with trowel, to correct thickness and specifications
• Finishes texture coat to plumb/level
• Cures finished texture coat surface to manufacturers recommendations and specification
Plans and specifications
Enterprise policies and procedures
Manufacturer specifications
Material Safety Data Sheets
Australian Standards
Injury avoidance
Working at height regulations
OH&S policy
General Construction terminology
BSBSBM301A
Research business opportunities
22 • Investigates own business opportunities and feasibility of the business viability
• Consults with specialist services and reviews emerging technologies and alternative business methodologies
• Assesses risks, returns and resources
• Reviews own financial, business and technical skills
• Assesses own personal skills and attributes against those necessary to operate the business
• Evaluates the results of research and assesses the likely viability and practicability of a business opportunity, taking into account the current business/ market climate and resources available
OH&S policy
Business principles
Principles of risk management
Research skills
Relevant industry codes of practice
General Construction terminology
LMFGG2008A
Glaze/reglaze residential windows and doors
23 • Assesses on site difficulties, protection of fixtures and fittings and any special characteristics of the window or door
• Plans work sequence, tools, equipment and materials – glass type (to order, security, noise or light control, type,
Glass handling and movement procedures
Building plans
Enterprise policies and
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 87 of 115 Version 1: January 2008
Unit and element
covered in task
Task No.
Observable behaviours in task Industry requirements Assessor’s comments Indicate if behaviour observed
Date assessed
size and imperfections)
• Selects fixing methods taking into account specification, type of glass and frame, security, sealing method and frame condition
• Checks size against specification, removes old glass and sealant, cleans and prepares surface
• Installs glass and fixes to position
• Applies solvents and sealers, then cleans
• Glazes timber putty faced and beaded window sashes including fixed, sliding, double hung, casement and awning sashes
• Glazes metal channel and beaded window sashes including fixed, sliding, double hung, casement and awning sashes
• Glazes timber putty faced and beaded doors including fixed, sliding, hinged, pivot and bi-fold doors
• Glazes metal channel and beaded doors including fixed, sliding, hinged, pivot and bi-fold doors
• Reglazes timber and metal windows and doors including hack out, safe removal of beads and glass
• Reinstalls sash cords, unique and spring balances on timber and metal double hung windows
procedures
Australian Standards
Building Code of Australia
Material Safety Data Sheets
General Construction terminology
MEM08012B
Prepare surfaces by abrasive blasting (basic)
24 • Assesses work requirements
• Selects blasting process, equipment and media
• Prepares work site for surface cleaning
• Sets up equipment and consumables
• Selects correct rust inhibitor
• Carries out pre-operational check
• Operates blasting equipment
• Practices emergency shut down
• Completes work
• Disposes of abrasive media
Plans and specifications
Enterprise policies and procedures
Manufacturer specifications
Material Safety Data Sheets
Australian Standards
Environmental requirements
Injury avoidance
General Construction terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 88 of 115 Version 1: January 2008
Unit and element
covered in task
Task No.
Observable behaviours in task Industry requirements Assessor’s comments Indicate if behaviour observed
Date assessed
• Cleans and disassembles blasting equipment
• Records and reports equipment faults
• Assesses surface preparation for cleanliness and conformance
• Rectifies faults and defects
MEM08013B
Prepare surfaces by abrasive blasting (advanced)
25 • Assesses work requirements
• Selects blasting process, equipment and media
• Prepares work site for surface cleaning
• Sets up equipment and consumables
• Selects correct rust inhibitor
• Carries out pre-operational check
• Inspects work piece prior to cleaning
• Reports defects and faults requiring remedial or pre-treatment
• Operates blasting equipment
• Practices emergency shut down
• Completes work
• Disposes of abrasive media
• Cleans and disassembles blasting equipment
• Records and reports equipment faults
• Assesses surface preparation for cleanliness and conformance
• Rectifies faults and defects
Plans and specifications
Enterprise policies and procedures
Manufacturer specifications
Material Safety Data Sheets
Australian Standards
Environmental requirements
Injury avoidance
General Construction terminology
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 89 of 115 Version 1: January 2008
SECTION E
Resources for Practical Tasks
You use this section to access any resources required by the candidate to undertake the practical task/s or scenario/s. They are suggested resources only. You may wish to modify or use other resources for the assessment tasks.
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 90 of 115 Version 1: January 2008
In undertaking RPL Assessment utilising this tool, assessors and participants may wish to visit the following sites for possible resources:
• Resource Generator - www.resourcegenerator.gov.au • Construction and Property Services Industry Skills Council –
www.cpsisc.com.au • Construction Skills Queensland – www.csq.com.au • Be Constructive – www.beconstructive.com.au
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 91 of 115 Version 1: January 2008
SECTION F
Third Party Verification The preferred approach in gaining third party validation is to take the forms in this section to the candidate’s previous employers or referees to gain confirmation of the candidate’s skills against the required competencies. This would be done during a conversation or interview with these people. It may be beneficial to make contact with the employers/referees early in the recognition process to make appointments, particularly if you have to travel some distance to visit them. This may be done on the same day as a practical assessment in the workplace if appropriate. It is recommended that verification be obtained from one or two referees who can confirm the candidate’s industry skills in context over time.
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 92 of 115 Version 1: January 2008
REFEREE TESTIMONIAL
(Date) To whom it may concern, RE: skills in/as (insert candidate name) (insert industry/job title) I certify that the above named person has: worked at for a period of years regularly undertaken the following activities within the workplace since commencing employment with this organisation:
Initial those skills/ competencies (below) that the candidate has or can successfully perform in the workplace
⎯ Acts in accordance with Workplace Health & Safety regulations
⎯ Works effectively with other team members and supervisors
⎯ Plans, organises and communicates on all projects
⎯ Plans, sets out and uses materials and equipment (such as, paint, decorating materials, texture coat, trowelled texture coat, wallpaper, brushes, rollers, spray equipment, elevated work platforms, hoists, scaffolding)
⎯ Removes and replaces doors, door and window furniture
⎯ Plans and prepares surfaces for painting
⎯ Applies paint, texture coat, trowelled texture coatings, spray paint, decorative finishes, stains, clear finishes, protective coatings and wallpaper
⎯ Matches paint colours
⎯ Treats lead paint hazards
⎯ Removes graffiti ⎯ Plans, sets out, glazes and reglazes residential windows and doors
⎯ Plans and prepares surfaces by abrasive blasting
If you would like any further information or would like to discuss any of the above, I can be contacted on Yours sincerely Signature Print Name and Position
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 93 of 115 Version 1: January 2008
SECTION G
Assessment Tables You use these tables as a reference tool to see at a glance which units/elements of competency are within the qualification. Question numbers refer to those found in SECTION C of this kit. Practical assessment/scenarios numbers refer to those found in SECTION D of this kit. It is important to note that this section is used for validation purposes only. Any mapping should be done after questions and tasks have been selected.
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 94 of 115 Version 1: January 2008
Elements Performance Criteria Questions Practical Tasks
BCGCM1001B Follow OH&S policies and procedures
1. Follow safe work practices
1.1 Tasks are performed in a safe manner and in accordance with legislative requirements, enterprise policies and procedures 1.2 Organisation of duties, tools, equipment and materials are performed in accordance with enterprise procedures 1.3 Personal protective equipment and clothing is worn, used and stored according to enterprise procedures 1.4 Plant and equipment guards are used in accordance with manufacturers specifications and regulations, where applicable 1.5 Safety signs and symbols are identified and followed
1, 2 9, 10, 11, 32 - 34
2 2, 3
4
GC GC, 5, 6
GC GC GC
2. Assess risks 2.1 Hazards in the work area are identified, assessed and reported to designated personnel 2.2 OH&S issues and risks in the work area are identified, assessed and reported to designated personnel 2.3 Safe workplace procedures and safe work instructions are followed for controlling risks 2.4 OH&S, hazard, accident or incident reports are contributed to according to workplace procedures and State/Territory legislation
3 2, 3, 20 2, 3, 20
2, 3
GC, 1 GC, 1 GC, 1 GC, 1
3. Follow emergency procedures
3.1 Appropriate personnel are identified in the event of an emergency 3.2 Safe workplace procedures for dealing with accidents, fires and emergencies are followed within scope of responsibilities 3.3 Emergency and evacuation procedures are practiced and carried out when required
18 18, 19, 22
18, 21
GC, 1 GC, 1 GC, 1
BCGCM1002B Work effectively in the General Construction Industry
1. Identify the industry work context and setting
1.1 The scope and nature of the General Construction industry functions and activities are identified 1.2 The profile of the General Construction industry in terms of direct and indirect employment and national economic importance is
identified 1.3 Trends in technology and processes which are likely to impact on the General Construction industry are identified and
comprehended 1.4 General Construction employment conditions, responsibilities and obligations are identified and clarified
23 23, 25
23, 25
25
2. Organise and accept responsibility for own workload
2.1 Priorities and deadlines are established in consultation with others and recorded 2.2 Work activities are planned and progress of work is communicated to others whose personal work plans and timelines may be
affected 2.3 Work is completed to the standard expected in the workplace and in accordance with any guidelines, directions and
specifications 2.4 Variations and difficulties affecting work requirement are identified through regular reviews and action is taken to report these
issues to appropriate personnel 2.5 Additional support to improve work outcomes is communicated clearly to the appropriate personnel
5, 6, 8 5,6, 8, 11
5, 6, 7, 8
8, 9, 15
7, 10, 11
GC, 2 GC, 2
GC, 2
GC, 2 GC, 2
3. Work in a team 3.1 Site goals and the contributions to be made by teams are identified and understood 3.2 Individual contributions to team activities are identified, agreed and reviewed periodically with the team 3.3 Defined roles and strengths of other team members are identified and acknowledged 3.4 Assistance and encouragement are provided to other team members wishing to enhance their role and the role of the team 3.5 Ground rules for team operations are reviewed and changes are made through team consultative processes 3.6 Team improvements are initiated and/or encouraged from team members 3.7 Causes of disharmony and other barriers to achievement are promptly resolved or referred to the appropriate party for resolution
7, 10, 13 7, 10, 13
7 7, 8, 13
10, 13, 15 7, 13, 27
26
GC GC GC GC GC GC GC
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 95 of 115 Version 1: January 2008
Elements Performance Criteria Questions Practical Tasks
4. Participate in identifying and pursuing own development needs
4.1 Site goals and the contributions to be made by teams are identified and understood 4.2 Individual contributions to team activities are identified, agreed and reviewed periodically with the team 4.3 Defined roles and strengths of other team members are identified and acknowledged 4.4 Assistance and encouragement are provided to other team members wishing to enhance their role and the role of the team 4.5 Ground rules for team operations are reviewed and changes are made through team consultative processes 4.6 Team improvements are initiated and/or encouraged from team members 4.7 Causes of disharmony and other barriers to achievement are promptly resolved or referred to the appropriate party for resolution
5, 6, 7, 8, 13 5, 6, 7, 8, 13
7, 13 7, 13, 27
7, 13 7, 13
26
GC GC GC GC GC GC GC
5. Participate in site meetings
5.1 Meeting procedures and objectives are identified, understood, and observed 5.2 Points of view and comments, including agreement and dissent are presented in a logical, persuasive and orderly manner 5.3 Points of view of other members are given a fair hearing
13 13, 26 10, 13
2 2 2
BCGCM1003B Plan and organise work
1. Plan and prepare 1.1 Work instructions and operational details are obtained, confirmed and applied 1.2 Safety requirements are followed in accordance with safety plans and policies 1.3 Signage/barricade requirements are identified and implemented 1.4 Tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability
and any faults are rectified or reported prior to commencement 1.5 Material quantity requirements are calculated in accordance with plans and/or specifications 1.6 Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use 1.7 Environmental protection requirements are identified for the project in accordance with environmental plans and regulatory
obligations and applied
11, 14 1, 2, 3
4 34
29
32, 33 16
GC GC GC
GC, 6
GC GC, 5
GC
2. Sequence work safely 2.1 Work plan is determined, modified and performed in a logical and efficient sequence 2.2 Tasks are completed to meet work instructions
6 11
GC GC
3. Clean up 3.1 Work area is cleared and materials disposed of or recycled in accordance with project environmental management plan 3.2 Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturers’ recommendations and
standard work practices
17 17
GC GC
BCGCM1004B Conduct workplace communication
1. Gather, convey and receive information
1.1 Verbal and written instructions are gathered, received and responded to with correct actions 1.2 Instructions conveyed accurately 1.3 Work signage is responded to with correct action 1.4 Information is conveyed in simple English and message is confirmed 1.5 Questions are used to gain additional information and to clarify understanding
9, 10, 11 11
4, 11 9, 10, 11 9, 10, 11
GC GC GC GC GC
2. Carry out face to face routine communi-cation
2.1 Routine instructions and messages are received and followed 2.2 Workplace procedures are carried out to company requirements 2.3 Information from a range of sources is accessed and interpreted
9, 10, 11 11
9, 10, 11
GC GC GC
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 96 of 115 Version 1: January 2008
Elements Performance Criteria Questions Practical Tasks
2.4 Information is selected and sequenced correctly 2.5 Verbal and written reporting is completed where required
11, 6 10, 11
GC GC
3. Apply visual communi-cations
3.1 The visual communications used follow accepted industry practice or social convention 3.2 The attention of the communicating parties is obtained, confirmed and/or acknowledged 3.3 The intention of the visual communication is clarified and confirmed at each step 3.4 Visual communications which are unclear or ambiguous are questioned or visually cancelled 3.5 Instances of unclear visual communications are followed up to avoid repeated problems
12 12 12 12 12
GC GC GC GC GC
4. Participate in simple on site meetings
4.1 Correct process for on site meetings are identified and followed to pre-determined or agreed procedures 4.2 Responses are sought and provided to others in the group 4.3 Constructive contributions are made 4.4 Goals or outcomes are identified and/or recorded
13 13 13 13
GC GC GC GC
BCGCM1005B Carry out measurements and calculations
1. Plan and prepare 1.1 Work instructions are confirmed and applied 1.2 Safety requirements are obtained from the site safety plan, other regulatory specifications or legal obligations and applied 1.3 Measuring and calculating equipment selected to carry out tasks are consistent with the requirements of the job, checked for
serviceability and any faults are rectified or reported
11, 13 1, 2, 3
34
GC GC
GC, 6
2. Obtain measurements 2.1 Method of obtaining the measurement is selected and applied 2.2 Measurements are obtained using a rule or tape, accurate to 1mm 2.3 Measurements are confirmed and recorded
28 28 28
3 3 3
3. Perform calculations 3.1 Appropriate calculation method is selected for achieving the required result 3.2 Material quantities for the project are correctly calculated using the appropriate factors 3.3 Results are confirmed and recorded
28 29 29
3 3 3
4. Estimate approximate quantities
4.1 Calculations for determining material requirements are taken 4.2 Appropriate formulas for calculating quantities are selected 4.3 Quantities are estimated from the calculations taken 4.4 Material quantities for the project are calculated, confirmed and recorded within enterprise tolerances
29 30 29 29
3 3 3 3
BCGCM2001B Read and interpret plans and specifications
1. Identify types of drawings and their functions
1.1 Main types of plans and drawings used in the civil construction sector of the industry are identified 1.2 Key functions of each type of drawing are identified 1.3 Quality requirements of company operations are recognised and adhered to 1.4 Environmental controls are identified from the job plans, specifications and environmental plan
14 14 14 14
GC GC GC GC
2. Recognise amendments 2.1 Title panel is checked to verify latest amendments to drawing 2.2 Amendments to specifications are checked to ensure currency of information
15 15
GC GC
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 97 of 115 Version 1: January 2008
Elements Performance Criteria Questions Practical Tasks
3. Recognise commonly used symbols and abbreviations
3.1 General Construction symbols and abbreviations are recognised 3.2 Legend is located on project drawings, symbols and abbreviations are correctly interpreted
14 14
GC GC
4. Locate and identify key features on a site plan
4.1 Orientation of the plan with the site is achieved 4.2 Key features of the site are identified and located 4.3 Access to site is gained and services, main features, contours and datum are identified
14 14 14
GC GC GC
5. Identify project requirements
5.1 Dimensions for project and nominated locations are identified 5.2 Construction types and dimensions for nominated locations are identified 5.3 Environmental controls and locations are identified 5.4 Location, dimensions and tolerances for ancillary works are identified
14 14 16 14
GC GC GC GC
6. Read and interpret job specifications
6.1 Job specifications are identified from drawings, notes and descriptions 6.2 Standards of work, finishes and tolerances are identified from the project specifications 6.3 Material attributes are identified from specifications
14 14 14
GC GC GC
BCGCM2008B Erect and dismantle restricted height scaffolding
1. Plan and prepare 1.1 Work instructions, including plans, specifications, quality requirements and operational details are obtained, confirmed and applied
1.2 Safety requirements are followed in accordance with safety plans and policies 1.3 Signage/barricade requirements are identified and implemented 1.4 Plant, tools and equipment are selected to carry out tasks are consistent with the requirements of the job, checked for
serviceability and any faults are rectified or reported prior to commencement 1.5 Material quantity requirements are calculated in accordance with plans and/or specifications 1.6 Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use 1.7 Environmental protection requirements are identified for the project in accordance with environmental plans and regulatory
obligations and applied
11, 14
1, 2, 3 4
37, 38 29
35, 36
16
GC
GC GC
GC, 7 GC
GC, 6
GC
2. Erect scaffolding 2.1 Purpose for scaffolding is confirmed and associated work tasks identified 2.2 Expected loading on scaffold and supporting structure is determined using load tables 2.3 Site access and egress routes are identified 2.4 Scaffolding and components are selected and inspected with damaged components labeled and rejected or repaired 2.5 Adequate footing is established in accordance with AS for scaffolding 2.6 Scaffolding is erected in accordance with regulations and planned hazard prevention and control measures, acceptable safe
work practices and manufacturers’ requirements
31, 33 31, 32 31, 32
33 31, 32, 33
31, 33
4 4 4 4 4 4
3. Inspect, repair and alter scaffolding
3.1 Critical structural and safety areas of scaffolding are inspected for damage, corrosion and wear 3.2 Current use of scaffolding is checked for accordance with the type of scaffolding equipment 3.3 Inspection log and handover is completed 3.4 Scaffolding is reviewed to determine if changes or modifications were scheduled as per original planning 3.5 Alteration or repair carried out where specified
31, 33 31, 33
31, 32, 33 31, 32,33
33
4 4 4 4 4
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 98 of 115 Version 1: January 2008
Elements Performance Criteria Questions Practical Tasks
4. Dismantle scaffolding 4.1 Scaffolding is dismantled using reverse procedure as for erection 31, 32, 33 4
5. Clean up 5.1 Work area is cleared and materials disposed of, reused or recycled in accordance with legislation/regulations/codes of practice and job specification
5.2 Plant, tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturers’ recommendations and standard work practices
17
17
GC
GC
BCGCM3001B Operate elevated work platforms
1. Plan and prepare 1.1 Work instructions, including plans, specifications, quality requirements and operational details are obtained, confirmed and applied
1.2 Safety requirements are followed in accordance with safety plans and policies 1.3 Signage/barricade requirements are identified and implemented 1.4 Plant, tools and equipment are selected to carry out tasks that are consistent with the requirements of the job, checked for
serviceability and any faults are rectified or reported prior to commencement 1.5 Material quantity requirements are calculated in accordance with plans and/or specifications 1.6 Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use 1.7 Environmental protection requirements are identified for the project in accordance with environmental plans and regulatory
obligations and applied
11, 14
1, 2, 3 4
37, 38 29
35, 36
16
GC
GC GC
GC, 7 GC
GC, 6
GC
2. Conduct routine checks of platform
2.1 Power source is determined and connected to platform equipment to manufacturers’ specifications 2.2 Routine pre-operational equipment checks are carried out in accordance with checklist from operator’s manual or manufacturers
specifications 2.3 Equipment is switched on in accordance with start up procedures and controls checked for correct operation and ease of
movement 2.4 Emergency safety devices are checked to comply with instructions from operator’s manual and checked for manual operation 2.5 Work location is checked for level ground or floor surface to determine stabilising and safe working area requirements
34 34
34 34 34
5 5
5 5 5
3. Locate equipment in place for work application
3.1 Platform is positioned for work application and stabilisers engaged to set equipment base level into place 3.2 Tools, equipment and materials are placed into bucket/platform to job application requirements
34 34
5 5
4. Elevate platform to work location
4.1 Harness is fitted securely and lanyard connected to attachment point 4.2 Controls are operated to manufacturers’ recommendations and platform elevated to work position 4.3 Power is switched off where specified and locking devices engaged to operator’s manual 4.4 Work is carried out to job specification and safety requirements of operator’s manual
34 34 34 34
5 5 5 5
5. Lower platform and shut down
5.1 Controls are operated to manufacturers’ recommendations and platform lowered to down position 5.2 Shut down procedures are carried out to operator’s manual and equipment switched off
34 34
5 5
6. Clean up 6.1 Work area is cleared and materials disposed of, reused or recycled in accordance with legislation/regulations/codes of practice and job specification
6.2 Plant, tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturers’ recommendations and standard work practices
6.3 Work completion procedures are applied and relevant personnel notified that work is finished
17
17 17
GC
GC GC
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 99 of 115 Version 1: January 2008
Elements Performance Criteria Questions Practical Tasks
BCGPD2001B Handle painting and decorating materials
1. Plan and prepare 1.1 Work instructions, including plans, specifications, quality requirements and operational details are obtained, confirmed and applied
1.2 Safety requirements are followed in accordance with safety plans and policies 1.3 Signage/barricade requirements are identified and implemented 1.4 Tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and
any faults are rectified or reported prior to commencement 1.5 Environmental protection requirements are identified for the project in accordance with environmental plans and regulatory
obligations and applied
11, 14
1, 2, 3 4
37
16
GC
GC GC
GC, 7
GC
2. Identify, handle and store painting and decorating materials
2.1 Painting and decorating products, material and components, on delivery to site, are identified and checked for conformity to material schedule, plans and specifications
2.2 Handling characteristics of painting and decorating material and components are identified and safe and effective handling techniques are adopted
2.3 Storage locations are confirmed as satisfying fire safety, ventilation and product dispersal requirements 2.4 Materials are handled safely and effectively according to Material Safety Data Sheets and requirements of regulatory authorities 2.5 Painting and decorating material and components are sorted to suit material type and size, stacked for ease of identification and
retrieval 2.6 Painting and decorating material and components are protected against physical and water damage and stored clear of traffic
ways
35
35
35 35, 36
35 35
6
6
6 6 6 6
3. Select and distribute painting and decorating materials in preparation for use
3.1 Painting and decorating products, material and components are identified, selected from stack and safely handled and distributed to required job location
3.2 Storage/holding area at job location is checked to ensure provision of adequate ventilation, fire safety and dispersal 3.3 Painting and decorating materials are stored to best serve their subsequent use 3.4 Work areas are prepared including the removal of objects and the use of drop sheets to protect surrounding surfaces
35
35, 36 35 35
6
6 6 6
4. Clean up 4.1 Hazardous material is identified for separate handling by authorised personnel 4.2 Work area is cleared and material disposed of in a safe and effective manner in accordance with State and Territory requirements 4.3 Unused materials are sealed and stored/stacked in accordance with standard material handling practices 4.4 Waste and unwanted materials are removed and placed into job waste bins or rubbish stockpile in a safe and effective manner in
accordance with environmental protection requirements 4.5 The possibility of spontaneous combustion is identified and suitable protective measures are applied 4.6 Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturers’ recommendations and
standard work practices
36 17 17
17 36 17
6 GC GC
GC 6
GC
BCGPD2002B Use painting and decorating tools and equipment
1. Plan and prepare 1.1 Work instructions, including plans, specifications, quality requirements and operational details are obtained, confirmed and applied
1.2 Safety requirements are followed in accordance with safety plans and policies 1.3 Signage/barricade requirements are identified and implemented
11, 14
1, 2, 3 4
GC
GC GC
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 100 of 115 Version 1: January 2008
Elements Performance Criteria Questions Practical Tasks
1.4 Material quantity requirements are calculated in accordance with plans and/or specifications 1.5 Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use 1.6 Environmental protection requirements are identified for the project in accordance with environmental plans and regulatory
obligations and applied
29 35, 36
16
GC GC, 6
GC
2. Identify hand and power tools
2.1 Hand and power tools, their functions, operations and limitations are identified 2.2 OH&S requirements for using hand tools are recognised and adhered to 2.3 OH&S requirements for using power tools are recognised and adhered to
37 37 37
7 7 7
3. Select tools for project 3.1 Tools are selected consistent with job requirements 3.2 Tools, including leads and hoses, are checked for tags, serviceability and safety and any faults rectified or reported 3.3 Power tools guards, retaining bolts, couplings, gauges and controls are checked and maintained in accordance with
manufacturers’ recommendations 3.4 Equipment to hold or support material during operation is selected 3.5 Pre-operational checks including lubricants, hydraulic fluid and water are completed in accordance with manufacturers’
recommendations
37 37 37
37 37
7 7 7
7 7
4. Use tools 4.1 Power and/or compressed air supply is connected to work area 4.2 Start up and shut down procedures are followed 4.3 Tools are safely and effectively used according to manufacturers’ recommendations and OH&S requirements 4.4 Tools are safely located and switched off when not in immediate use
37 37 37 37
7 7 7 7
5. Select plant and equipment
5.1 Functions and limitations of plant/equipment used in painting and decorating are identified 5.2 Plant and equipment are selected consistent with hazard minimisation and needs of job 5.3 Method of operation of plant/equipment is identified 5.4 OH&S requirements for operating and using plant and equipment are recognised and adhered to 5.5 Plant and equipment are checked for safety and faults and rectified and reported
38 38 38 38 38
7 7 7 7 7
6. Use plant and equipment
6.1 Plant and equipment is safely and effectively used 6.2 Plant and equipment is safely located when not in immediate use 6.3 Plant and equipment are cleaned, maintained and stored after use
38 38 38
7 7 7
7. Clean up 7.1 Work area is cleared and materials disposed of, reused or recycled in accordance with legislation/ regulations/ codes of practice and job specification
7.2 Machinery, tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturers’ recommendations and standard work practice
17
17
GC
GC
BCGPD2003B Remove and replace doors, door and window furniture
1. Plan and prepare 1.1 Work instructions, including plans, specifications, quality requirements and operational details are obtained, confirmed and applied
1.2 Safety requirements are followed in accordance with safety plans and policies 1.3 Signage/barricade requirements are identified and implemented 1.4 Tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and
11, 14
1, 2, 3 4
GC
GC GC
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 101 of 115 Version 1: January 2008
Elements Performance Criteria Questions Practical Tasks
any faults are rectified or reported prior to commencement 1.5 Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use 1.6 Environmental protection requirements are identified for the project in accordance with environmental plans and regulatory
obligations and applied
37 35 16
GC, 7 GC, 6
GC
2. Remove door and window furniture
2.1 Screens and fittings are carefully removed and stored safely 2.2 Window furniture is carefully removed and located or stored safely 2.3 Door furniture is carefully removed and located or stored safely 2.4 Doors are carefully removed and located or stored safely
39 39 39 39
8 8 8 8
3. Replace doors and window furniture
3.1 Doors are carefully handled, placed, hung and fixed into original place 3.2 Door furniture is refitted and fixed back into place to specifications and without marking door or surrounds 3.3 Window furniture is refitted and fixed back into place to specifications and without marking window surfaces or surrounds 3.4 Screens are replaced securely in position without damage to surrounds
39 39 39 39
8 8 8 8
4. Clean up 4.1 Work area is cleared and materials disposed of, reused or recycled in accordance with legislation/ regulations/ codes of practice and job specification
4.2 Plant, tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturers’ recommendations and standard work practices
17
17
GC
GC
BCGPD3001B Prepare surface for painting
1. Plan and prepare 1.1 Work instructions, including plans, specifications, quality requirements and operational details are obtained, confirmed and applied
1.2 Safety requirements are followed in accordance with safety plans and policies 1.3 Signage/barricade requirements are identified and implemented 1.4 Tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and
any faults are rectified or reported prior to commencement 1.5 Material quantity requirements are calculated in accordance with plans and/or specifications 1.6 Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use 1.7 Environmental protection requirements are identified for the project in accordance with environmental plans and regulatory
obligations and applied
11, 14
1, 2, 3 4
37 29 35
16
GC
GC GC
GC, 7 GC
GC, 6
GC
2. Prepare new or uncoated surfaces for painting or clear finish
2.1 The suitability of the surface for painting or clear finish application is determined in accordance with manufacturers’ recommendations and job specifications
2.2 The surface preparation method is correctly selected in accordance with the environment, finish and substrate requirements 2.3 Surface is prepared to manufacturers’ specifications in compliance with substrate requirements, specifications and relevant
standards 2.4 Surface imperfections are stopped, filled and sanded to a smooth finish ready for painting in accordance with manufacturers’
recommendations and job specifications
40
40
40 40
9
9
9 9
3. Prepare previously coated surfaces for painting or clear finish
3.1 Condition and nature of existing substrate and surface material are determined and tested in accordance with relevant standards 3.2 Potential hazards are identified and correct procedures are used to reduce risks in accordance with manufacturers’
recommendations and job specifications
40 40
9 9
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 102 of 115 Version 1: January 2008
Elements Performance Criteria Questions Practical Tasks
3.3 The surface preparation method is correctly selected in accordance with the environment, finish and substrate requirements 3.4 Surfaces are prepared by removing unwanted coatings and loose debris 3.5 Surface defects are repaired and imperfections stopped, filled and sanded to smooth finish ready for painting in accordance with
manufacturers’ recommendations and job specifications
40 40 40
9 9 9
4. Remove wallpaper and prepare surface for painting
4.1 Type, condition and nature of existing type of wallpaper are determined prior to removal 4.2 The surface preparation method is correctly selected in accordance with the environment, finish and substrate requirements 4.3 Wallpaper is removed using the most appropriate method 4.4 Surfaces are prepared for paint application by removing loose debris 4.5 Surface defects are repaired and imperfections stopped, filled and sanded to smooth finish ready for painting in accordance with
manufacturers’ recommendations and job specifications
40 40 40 40 40
9 9 9 9 9
5. Clean up 5.1 Waste and unwanted materials are removed and placed into job waste bins or rubbish stockpile in accordance with sound work practices and compliance with the environmental requirements
5.2 Painting tools and equipment are cleaned with correct solutions without damage and stored safely and effectively to manufacturers’ specifications
5.3 Unused materials are sealed and stored/stacked in accordance with standard material handling practices and techniques and company requirements
5.4 Work area is cleared and materials disposed of or recycled in a manner to avoid spontaneous combustion and in accordance with state or territory legislation
17
17
17
17
GC
GC
GC
GC
BCGPD3002B Apply paint by brush and roller
1. Plan and prepare 1.1 Work instructions, including plans, specifications, quality requirements and operational details are obtained, confirmed and applied
1.2 Safety requirements are followed in accordance with safety plans and policies 1.3 Signage/barricade requirements are identified and implemented 1.4 Tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and
any faults are rectified or reported prior to commencement 1.5 Material quantity requirements are calculated in accordance with plans and/or specifications 1.6 Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use 1.7 Environmental protection requirements are identified for the project in accordance with environmental plans and regulatory
obligations and applied
11, 14
1, 2, 3 4
37 29 35
16
GC
GC GC
GC, 7 GC
GC, 6
GC
2. Prepare the work area and materials
2.1 Materials and substrate surfaces are prepared in accordance with manufacturers’ recommendations and relevant Australian Standards
2.2 Surrounding surfaces not to be painted are protected by drop sheets, masking or removal of objects in accordance with manufacturers’ recommendations and job specifications
2.3 Job location is checked to ensure provision of adequate ventilation and precautions are taken to prevent fire and/or explosion in accordance with manufacturers’ recommendations and MSDS data
2.4 Materials for specified paint finish are mixed to designed proportion and consistency in accordance with manufacturers’ recommendations and job specifications
2.5 Paint and colours are thoroughly stirred using separate stirring sticks
41 41 41 41 41 41
10 10 10 10 10 10
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 103 of 115 Version 1: January 2008
Elements Performance Criteria Questions Practical Tasks
2.6 Correct amounts of paint material are prepared to specified ratio with specified drying time in accordance with manufacturers’ recommendations and specifications
3. Apply paint with brush/roller
3.1 Brush, roller or brush/roller combination is selected for specified surface profile, size of area and type of paint and finish specified in accordance with manufacturers’ recommendations and job specifications
3.2 Paint is applied to achieve required level of opacity, finish, texture and sheen in accordance with manufacturers’ recommendations and job specifications
42
42
10
10
4. Finish the application 4.1 Finished paint surface is cured using curing method in accordance with manufacturers’ recommendations and job specifications 4.2 Finished paint surface is tested using testing procedures in accordance with manufacturers’ recommendations and job
specifications
42
42
10
10
5. Clean up 5.1 Painting tools and equipment are cleaned with correct solutions without damage and stored safely and effectively to manufacturers’ specifications
5.2 Unused materials are sealed and stored/stacked in accordance with standard material handling practices and techniques and company requirements
5.3 Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturers’ recommendations and standard work practices
5.4 Work area is cleared and materials disposed of or recycled in accordance with state or territory legislation
17
17
17 17
GC
GC
GC GC
BCGPD3003B Apply texture coat paint finishes by brush, roller and spray
1. Plan and prepare 1.1 Work instructions, including plans, specifications, quality requirements and operational details are obtained, confirmed and applied
1.2 Safety requirements are followed in accordance with safety plans and policies 1.3 Signage/barricade requirements are identified and implemented 1.4 Plant, tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability
and any faults are rectified or reported prior to commencement 1.5 Material quantity requirements are calculated in accordance with plans and/or specifications 1.6 Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use 1.7 Environmental protection requirements are identified for the project in accordance with environmental plans and regulatory
obligations and applied
11, 14
1, 2, 3 4
37, 38 29 35
16
GC
GC GC
GC, 7 GC
GC, 6
GC
2. Prepare materials and application area
2.1 Area is set up for application processes to suit the application system being used 2.2 Adjoining surfaces to application area are protected by masking off or covering prior to application of texture coat paint 2.3 Adequate ventilation to application area is provided to maintain a safe environment 2.4 Measures are taken to ensure application area remains free of dust and foreign matter 2.5 Application system/equipment is prepared for use 2.6 Fittings are checked for function and security prior to use in accordance with manufacturers’ recommendations 2.7 Texture coat paint is mixed and adjusted to allow for application process in accordance with manufacturers’ recommendations
and plans/specification
43 43 43 43 43 43 43
11 11 11 11 11 11 11
3. Apply texture coat by brush and roller
3.1 Application equipment is used in accordance with manufacturers’ recommendations and job specifications 3.2 Texture coat paint is applied to surface using correct application technique to achieve an even finish with opacity and sheen level
44 44
11 11
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 104 of 115 Version 1: January 2008
Elements Performance Criteria Questions Practical Tasks
in accordance with the job specification 3.3 Defects in coating are identified and corrective action taken to achieve the required finish in accordance with the job specification
44 11
4. Apply texture coat by spray
4.1 Spray equipment is operated to standard operating procedures in accordance with manufacturers’ recommendations 4.2 Texture coat paint is applied to surface using correct application technique to achieve an even finish with opacity and sheen level
in accordance with the job specification 4.3 Defects in coating are identified and corrective action taken to achieve the required paint finish in accordance with the job
specification
45 45
45
11 11
11
5. Clean up 5.1 Work area is cleared and materials disposed of, reused or recycled in accordance with legislation/regulations/codes of practice and job specification
5.2 Plant, tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturers’ recommendations and standard work practices
17
17
GC
GC
BCGPD3004B Apply paint by spray
1. Plan and prepare 1.1 Work instructions, including plans, specifications, quality requirements and operational details are obtained, confirmed and applied
1.2 Safety requirements are followed in accordance with safety plans and policies 1.3 Signage/barricade requirements are identified and implemented 1.4 Plant, tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability
and any faults are rectified or reported prior to commencement 1.5 Material quantity requirements are calculated in accordance with plans and/or specifications 1.6 Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use 1.7 Environmental protection requirements are identified for the project in accordance with environmental plans and regulatory
obligations and applied
11, 14
1, 2, 3 4
37 29 35
16
GC
GC GC
GC, 7 GC
GC, 6
GC
2. Prepare materials and application area
2.1 Area is set up for application processes to suit spray system being used 2.2 Adjoining surfaces to application area are protected by masking off or covering prior to application of spray paint 2.3 Adequate ventilation to application area is provided to maintain a safe environment 2.4 Measures are taken to ensure application area remains free of dust and foreign matter 2.5 Paint is mixed and viscosity adjusted to allow for application process for spray paint finishing materials in accordance with
manufacturers’ recommendations and plans/specification
46 46 46 46 46
12 12 12 12 12
3. Set up and test spray equipment
3.1 Spray equipment components, accessories and lines for the selected spray system are identified, selected and set up in the operating location in accordance with manufacturers’ recommendations and plans/specification
3.2 Fittings are checked for function and security prior to use in accordance with manufacturers’ recommendations 3.3 Safety devices are identified, tested and defects corrected in accordance with standard operational and manufacturers’
requirements
47
47 47
12
12 12
4. Apply paint using the spray system
4.1 Spray equipment is operated to standard operating procedures in accordance with manufacturers’ recommendations 4.2 Paint is applied to surface using correct application technique to achieve an even finish with opacity and sheen level in
accordance with the job specification 4.3 Defects in coating are identified and corrective action taken to achieve the required spray paint finish in accordance with the job
48 48
48
12 12
12
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 105 of 115 Version 1: January 2008
Elements Performance Criteria Questions Practical Tasks
specification
5. Clean up and store equipment
5.1 Spray gun and associated components and equipment are dismantled, checked, cleaned and maintained in accordance with manufacturers’ recommendations and operator’s manual
5.2 Spray paint materials and solvents are stored safely to manufacturers’ specifications and company procedures 5.3 Work area is cleared and materials disposed of, reused or recycled in accordance with legislation/regulations/codes of practice
and job specification
17
17 17
GC
GC GC
BCGPD3005B Match specified paint colour
1. Plan and prepare 1.1 Work instructions, including plans, specifications, quality requirements and operational details are obtained, confirmed and applied
1.2 Safety requirements are followed in accordance with safety plans and policies 1.3 Signage/barricade requirements are identified and implemented 1.4 Tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and
any faults are rectified or reported prior to commencement 1.5 Material quantity requirements are calculated in accordance with plans and/or specifications 1.6 Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use 1.7 Environmental protection requirements are identified for the project in accordance with environmental plans and regulatory
obligations and applied
11, 14
1, 2, 3 4
37 29
35 16
GC
GC GC
GC, 7 GC
GC, 6
GC
2. Match paint colour to specified sample
2.1 Base colour is identified from analysis of sample 2.2 Paint type, tint base and sheen level of sample are established in accordance with manufacturers’ recommendations and
specifications 2.3 Colorants are selected as suitable for colour match 2.4 Colour is mixed and matched against sample and allowed to dry to establish accuracy of colour match 2.5 Full quantity of paint is mixed and colour match retested prior to application in accordance with specifications
49 49 49 49
49
13 13 13 13
13
3. Clean up 3.1 Work area is cleared and materials disposed of, reused or recycled in accordance with legislation/regulations/codes of practice and job specification
3.2 Machinery, tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturers’ recommendations and standard work practices
17
17
GC
GC
BCGPD3006B Apply stains and clear timber finishes
1. Plan and prepare 1.1 Work instructions, including plans, specifications, quality requirements and operational details are obtained, confirmed and applied
1.2 Safety requirements are followed in accordance with safety plans and policies 1.3 Signage/barricade requirements are identified and implemented 1.4 Tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and
any faults are rectified or reported prior to commencement 1.5 Material quantity requirements are calculated in accordance with plans and/or specifications 1.6 Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use 1.7 Environmental protection requirements are identified for the project in accordance with environmental plans and regulatory
11, 14
1, 2, 3 4
37 29 35 16
GC
GC GC
GC, 7 GC
GC, 6 GC
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 106 of 115 Version 1: January 2008
Elements Performance Criteria Questions Practical Tasks
obligations and applied
2. Prepare materials and application area
2.1 Area is set up for application processes to suit application system being used 2.2 Adjoining surfaces to application area are protected by masking off or covering prior to application of stains and finishes 2.3 Adequate ventilation to application area is provided to maintain a safe environment 2.4 Measures are taken to ensure application area remains free of dust and foreign matter
50 50 50 50
14 14 14 14
3. Stain bare timber surface
3.1 Stain is selected for type of timber allowing for aesthetics and durability in accordance with manufacturers’ recommendations and job specifications
3.2 Stain is prepared to proportions and consistency in accordance with manufacturers’ recommendations and job specification 3.3 Application method for the specified surface, area size and type of finish is selected in accordance with manufacturers’
recommendations and job specifications 3.4 Stain is applied to bare timber surface to specifications and manufacturers’ instructions 3.5 Wood filler and putty are selected, mixed, colour matched and applied to timber in accordance with job specifications
51
51
51
51 51
14
14
14
14 14
4. Apply clear finishes 4.1 Coats of selected clear finish are applied to achieve required level of opacity, finish and sheen in accordance with manufacturers’ recommendations and job specifications
4.2 Drying time is allowed between coats in accordance with manufacturers’ recommendations and job specifications 4.3 Clear finish surfaces are cured in accordance with manufacturers’ recommendations and job specifications
52
52 52
14
14 14
5. Clean up 5.1 Unused materials are sealed and stored/stacked in accordance with standard material handling practices and techniques and company requirements
5.2 Painting tools and equipment are cleaned with correct solutions without damage and stored safely and effectively to manufacturers’ specifications
5.3 Work area is cleared and materials disposed of, reused or recycled in accordance with legislation/regulations/codes of practice and job specification
17
17
17
GC
GC
GC
BCGPD3007B Apply wall paper
1. Plan and prepare 1.1 Work instructions, including plans, specifications, quality requirements and operational details are obtained, confirmed and applied
1.2 Safety requirements are followed in accordance with safety plans and policies 1.3 Tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and
any faults are rectified or reported prior to commencement 1.4 Material quantity requirements are calculated in accordance with plans and/or specifications 1.5 Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use 1.6 Environmental protection requirements are identified for the project in accordance with environmental plans and regulatory
obligations and applied
11, 14
1, 2, 3 37 29 35
16
GC
GC GC, 7
GC GC, 6
GC
2. Prepare surfaces for wallpaper
2.1 Condition, suitability and nature of existing substrate and surface material are determined and removal process is selected 2.2 Hazards are identified and correct procedures used to reduce risk to self and others in accordance with manufacturers’
recommendations and specifications 2.3 Surfaces are prepared for wallpapering application by removing existing coating and loose debris
53 53 53
15 15 15
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 107 of 115 Version 1: January 2008
Elements Performance Criteria Questions Practical Tasks
2.4 Surface defects are repaired and imperfections stopped, filled and sanded to smooth finish ready for wallpapering in accordance with manufacturers’ recommendations and job specifications
53
15
3. Prepare for the hanging process
3.1 Final application plan for hanging of wallpaper is determined and documented in accordance with manufacturers’ recommendations and with client requirements
3.2 Selected adhesives are prepared in accordance with manufacturers’ recommendations 3.3 Materials are checked for conformity to dye lot, batch number and other shading requirements in accordance with manufacturers’
recommendations and client requirements
54
54 54
15
15 15
4. Apply wallpaper 4.1 Size coating is applied to work area in accordance with manufacturers’ recommendations 4.2 Wallpaper is applied to work area ensuring an even surface, seams are butted, paper is plumb and pattern is free of defects 4.3 Trimming around fittings is completed accurately and with minimal impact on surroundings 4.4 Wallpaper application is completed in accordance with manufacturers’ recommendations and job specifications
54 54 54 54
15 15 15 15
5. Clean up 5.1 Work area is cleared and materials disposed of, reused or recycled in accordance with legislation/regulations/codes of practice and job specification
5.2 Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturers’ recommendations and standard work practices
17
17
GC
GC
BCGPD3008B Apply decorative paint finishes
1. Plan and prepare 1.1 Work instructions and operational details are obtained, confirmed and applied 1.2 Safety requirements are followed in accordance with safety plans and policies 1.3 Signage/barricade requirements are identified and implemented 1.4 Tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and
any faults are rectified or reported prior to commencement 1.5 Material quantity requirements are calculated in accordance with plans and/or specifications 1.6 Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use 1.7 Environmental protection requirements are identified for the project in accordance with environmental plans and regulatory
obligations and applied
11, 14 1, 2, 3
4 37
29 35 16
GC GC GC
GC, 7
GC GC, 6
GC
2. Prepare application area 2.1 Area is set up for application processes to suit surfaces to be painted 2.2 Adjoining surfaces to application area are protected by masking off or covering prior to application of decorative paint finishing
materials 2.3 Ventilation is provided in application area to maintain safety of self and others 2.4 Measures are taken to ensure application area is dust free
55 55
55 55
16 16
16 16
3. Apply mirror paint finish 3.1 Paint viscosity is adjusted to suit climatic conditions and method of application in accordance with manufacturers’ specifications and/or job specifications
3.2 Prime and intermediate coats are applied to specifications, allowed to dry thoroughly and sanded to a smooth, even finish 3.3 Final coat is applied without imperfections, flowing out to an even, smooth finish in accordance with manufacturers’ specifications
and/or job specifications
56
56 56
16
16 16
4. Apply broken colour 4.1 Ground coat to specified colour and consistency is applied evenly to prepared surface 57 16
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 108 of 115 Version 1: January 2008
Elements Performance Criteria Questions Practical Tasks
effects 4.2 Scumble glaze is applied to prepared ground and desired broken colour effect is produced to match sample in accordance with manufacturers’ specifications and/or job specifications
4.3 Clear coating is applied to achieve an even finish to specified sheen level in accordance with manufacturers’ specifications and/or job specifications
57 57
16 16
5. Produce imitation marble effects
5.1 Ground coat to specified colour and consistency is applied evenly to prepared surface 5.2 Marbling medium is mixed to designed proportions and colour and correctly applied to produce veins and markings as per
sample in accordance with manufacturers’ specifications and/or job specifications 5.3 Clear coating is applied to achieve an even finish to specified sheen level in accordance with manufacturers’ specifications
and/or job specifications
58 58
58
16 16
16
6. Produce imitation wood grain effects
6.1 Ground coat to specified colour and consistency is applied evenly to prepared surface 6.2 Wood graining medium is mixed to designed proportions and colour and correctly applied to produce grain markings as per
sample and in accordance with manufacturers’ specifications and/or job specifications 6.3 Specific highlights are added to match sample of decorative paint finishing materials in accordance with manufacturers’
specifications and/or job specifications 6.4 Clear coating is applied to achieve an even finish to specified sheen level in accordance with manufacturers’ specifications
and/or job specifications
58 58
58
58
16 16
16
16
7. Apply stencils 7.1 Stencil design is selected and laid out onto recommended material 7.2 Specified transfer method is used and design cut accurately for multiple colours using a ‘register’ mark 7.3 Initial stencil is placed and taped to designed location and paint is applied to produce first colour to specifications 7.4 Subsequent stencils are located accurately to pattern with each separate colour applied to specifications to produce designed
finish in accordance with manufacturers’ specifications and/or job specifications
59 59 59 59
16 16 16 16
8. Apply lining by brush 8.1 Lining work is selected and set out to designed effect on prepared surface to specifications 8.2 Paint materials, applicators and brush ware are identified and selected in accordance with suitability of use for lining application
and job specifications 8.3 Specified application techniques are applied to produce designed lining work effects and finish in accordance with
manufacturers’ specifications and/or job specifications
60 60
60
16 16
16
9. Clean up and store equipment
9.1 Special effect painting equipment and spray painting equipment are dismantled, cleaned, maintained and stored 9.2 Waste and unwanted materials are removed and placed into job waste bins or rubbish stockpile in a safe and effective manner in
accordance with sound work practices compliant with environmental protection requirements 9.3 Unused materials are sealed and stored/stacked in accordance with standard material handling practices and techniques and
company requirements 9.4 Work area is cleared and materials disposed of, reused or recycled in accordance with legislation/regulations/codes of practice
and job specification 9.5 Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturers’ specifications and/or
standard work practices
17 17
17
17
17
GC GC
GC
GC
GC
BCGPD3011B Treat lead paint hazards
1. Plan and prepare 1.1 Work instructions and operational details are obtained, confirmed and applied 1.2 Safety requirements are followed in accordance with safety plans and policies
11, 14 1, 2, 3
GC GC
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 109 of 115 Version 1: January 2008
Elements Performance Criteria Questions Practical Tasks
1.3 Signage/barricade requirements are identified and implemented 1.4 Tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and
any faults are rectified or reported prior to commencement 1.5 Material quantity requirements are calculated in accordance with plans and/or specifications 1.6 Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use 1.7 Environmental protection requirements are identified for the project in accordance with environmental plans and regulatory
obligations and applied
4 37
29
35, 36 16
GC GC, 7
GC
GC, 6 GC
2. Define and prepare work area
2.1 Circumstances in which lead based paints may be encountered are determined 2.2 Location of lead based paint to be treated is determined from plans/specifications 2.3 Testing is undertaken using approved testing methods 2.4 Options for the management and treatment of pre-existing lead based paints in buildings are considered and determined in
accordance with regulatory requirements 2.5 A safe working area is maintained around lead based paint locations using temporary control measures, barriers and signage 2.6 Plant, tools and equipment are positioned to suit job requirements
61 61 61 61
61 61
17 17 17 17
17 17
3. Remove contaminated materials
3.1 Appropriate removal processes are determined to suit job requirements 3.2 Contamination area is quarantined and people at risk are protected in accordance with regulatory requirements 3.3 Furnishings, other surfaces, surrounding ground areas, drinking vessels, water storage and foodstuffs are protected and all
doors and windows sealed where appropriate 3.4 Waste management procedures are identified for lead contamination from flake, chalk and dust 3.5 Removal processes are applied and contaminated materials are containerised for movement 3.6 Substrates are repaired, restored and prepared for subsequent coatings
62 62 62 62 62 62
17 17 17 17 17 17
4. Encapsulate contaminated materials
4.1 Stabilisation method is determined to make the building lead safe by applying temporary control measures 4.2 Appropriate methods for the containment of existing surfaces are determined or confirmed in accordance with regulatory
requirements 4.3 Over painting is conducted using oil based paints by applying a high quality undercoat sealer and two coats of quality topcoats 4.4 Specialised liquid encapsulant is applied in accordance with manufacturers’ specifications 4.5 Contaminated surface is enclosed using overlaying materials such as plasterboard or weatherboard and applying warning
notices of the latent lead hazard
62 62
62 62 62
17 17
17 17 17
5. Clean up 5.1 Work area is cleared and materials disposed of or recycled in accordance with state or territory legislation 5.2 Waste and unwanted materials are removed and placed into containment vessels for disposal in accordance with authorised
systems and relevant standards 5.3 Surface and soil tests are conducted to verify that no contamination has taken place and building is safe for occupation 5.4 Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturers’ recommendations and
standard work practices
17 17, 36, 63
17, 36, 63
17
GC GC
GC GC
BCGPD3009B Remove graffiti and apply protective coatings
1. Plan and prepare 1.1 Work instructions and operational details are obtained, confirmed and applied 11, 14 GC
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 110 of 115 Version 1: January 2008
Elements Performance Criteria Questions Practical Tasks
1.2 Safety requirements are followed in accordance with safety plans and policies 1.3 Signage/barricade requirements are identified and implemented 1.4 Plant, tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability
and any faults are rectified or reported prior to commencement 1.5 Material quantity requirements are calculated in accordance with plans and/or specifications 1.6 Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use 1.7 Environmental protection requirements are identified for the project in accordance with environmental plans and regulatory
obligations and applied
1, 2, 3 4
37, 38
29 35, 36
16
GC GC
GC, 7
GC GC, 6
GC
2. Prepare site and materials
2.1 Site area is set up for graffiti removal and preventative application processes to suit surfaces to be treated 2.2 Adjoining surfaces to application area are protected by masking off or covering prior to application of graffiti preventative
coatings 2.3 Adequate ventilation is provided for application area
64 64
64
18 18
18
3. Remove graffiti 3.1 Preparation processes are selected to suit the substrate surfaces and the graffiti circumstances 3.2 Type of coating previously used to cover graffiti is identified in accordance with current industry standards of practice,
manufacturers’ recommendations and specifications 3.3 Graffiti removal processes are applied to the affected area in accordance with current industry standards of practice,
manufacturers’ recommendations and specifications
65 65
65
18 18
18
4. Apply preventative application material
4.1 Substrate surfaces are cleaned and prepared for preventative application coatings in accordance with current industry standards of practice and manufacturers’ recommendations
4.2 Type of preventative application coating to cover specific type of graffiti is identified and prepared in accordance with manufacturers’ recommendations and job specifications
4.3 Preventative application coating to cover specific type of graffiti is applied in accordance with manufacturers’ recommendations and job specifications
66
66 66
18
18 18
BCGPD3010B Apply protective paint coating systems
1. Plan and prepare 1.1 Work instructions, including plans, specifications, quality requirements and operational details are obtained, confirmed and applied
1.2 Safety requirements are followed in accordance with safety plans and policies 1.3 Signage/barricade requirements are identified and implemented 1.4 Tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and
any faults are rectified or reported prior to commencement 1.5 Material quantity requirements are calculated in accordance with plans and/or specifications 1.6 Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use 1.7 Environmental protection requirements are identified for the project in accordance with environmental plans and regulatory
obligations and applied
11, 14
1, 2, 3 4
37
29 35 16
GC
GC GC
GC, 7
GC GC, 6
GC
2. Prepare surfaces for protective coating
2.1 The suitability of the surface for the protective coating is determined in accordance with manufacturers’ recommendations and job specifications
2.2 The surface preparation method is correctly selected in accordance with the environment, finish and substrate requirements 2.3 Surface is prepared to manufacturers’ specifications in compliance with substrate requirements, specifications and relevant
67
67
19
19
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 111 of 115 Version 1: January 2008
Elements Performance Criteria Questions Practical Tasks
standards 2.4 Surface imperfections are repaired or stopped, filled and sanded to a smooth finish ready for the protective coating in
accordance with manufacturers’ recommendations and job specifications
67 67
19 19
3. Apply protective coating system
3.1 Job location is checked to ensure provision of adequate ventilation and precautions taken to prevent fire and/or explosion 3.2 Protective coating system application is selected consistent with the job location, type of paint, type and condition of surface and
climatic conditions 3.3 Protective coating system is applied and finished in accordance with job/manufacturers’ specifications and relevant standards 3.4 Dry and wet testing is carried out in accordance with manufacturers’ specifications and relevant standards
67 67
67 67
19 19
19 19
4. Clean up 4.1 Waste and unwanted materials are removed and placed into job waste bins or rubbish stockpile in accordance with sound work practices and compliance with the environmental requirements
4.2 Painting tools, equipment and plant are cleaned with correct solutions without damage and stored safely and effectively to manufacturers’ specifications
4.3 Unused materials are sealed and stored/stacked in accordance with standard material handling practices and techniques and company requirements
4.4 Work area is cleared and materials disposed of or recycled in a manner to avoid spontaneous combustion and in accordance with state or territory legislation
17
17
17 17
GC
GC
GC GC
BCGPD3012B Apply advanced wallpaper techniques
1. Plan and prepare 1.1 Work instructions and operational details are obtained, confirmed and applied 1.2 Safety requirements are followed in accordance with safety plans and policies 1.3 Signage/barricade requirements are identified and implemented 1.4 Tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and
any faults are rectified or reported prior to commencement 1.5 Material quantity requirements are calculated in accordance with plans and/or specifications 1.6 Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use 1.7 Environmental protection requirements are identified for the project in accordance with environmental plans and regulatory
obligations and applied
11, 14 1, 2, 3
4 37
29 35 16
GC GC GC
GC, 7
GC GC, 6
GC
2. Prepare surfaces for wallpaper
2.1 Condition, suitability and nature of existing substrate and surface material are determined and removal process is selected 2.2 Hazards are identified and correct procedures used to reduce risk to self and others in accordance with manufacturers’
recommendations and specifications 2.3 Surfaces are prepared for wallpapering application by removing existing coating and loose debris 2.4 Surface defects are repaired and imperfections stopped, filled and sanded to smooth finish ready for wallpapering in accordance
with manufacturers’ recommendations and job specifications
68 68 68 68
20 20 20 20
3. Prepare for the hanging process
3.1 Final application plan for hanging of wallpaper and specialty material is determined and documented in accordance with manufacturers’ recommendations and with client requirements
3.2 Selected adhesives are prepared in accordance with manufacturers’ recommendations 3.3 Materials are checked for conformity to dye lot, batch number and other shading requirements in accordance with manufacturers’
recommendations and client requirements
69 69
69
20 20
20
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 112 of 115 Version 1: January 2008
Elements Performance Criteria Questions Practical Tasks
4. Apply wallpaper 4.1 Size coating is applied to work area in accordance with manufacturers’ recommendations 4.2 Wallpaper and specialty materials are applied to work area ensuring an even surface, seams are butted, paper is plumb and
pattern is free of defects 4.3 Trimming around fittings is completed accurately and with minimal impact on surroundings 4.4 Wallpaper and specialty material application are completed in accordance with manufacturers’ recommendations and job
specifications
69 69
69 69
20 20
20 20
5. Clean up 5.1 Work area is cleared and materials disposed of, reused or recycled in accordance with legislation/regulations/codes of practice and job specification
5.2 Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturers’ recommendations and standard work practices
17
17
GC
GC
BCGSP3003B Apply trowelled texture coat finishes
1. Plan and prepare 1.1 Work instructions, including plans, specifications, quality requirements and operational details are obtained, confirmed and applied
1.2 Safety requirements are followed in accordance with safety plans and policies 1.3 Signage/barricade requirements are identified and implemented 1.4 Tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and
any faults are rectified or reported prior to commencement 1.5 Material quantity requirements are calculated in accordance with plans and/or specifications 1.6 Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use 1.7 Environmental protection requirements are identified for the project in accordance with environmental plans and regulatory
obligations and applied
11, 14
1, 2, 3 4
37 29 35
16
GC
GC GC
GC, 7 GC
GC, 6
GC
2. Prepare surface area 2.1 Materials and substrate surfaces are prepared for the specified trowelled texture coat finish in accordance with manufacturers’ recommendations
2.2 Dash coat is mixed and applied liberally to wetted surface in accordance with manufacturers’ recommendations and specifications
70
70
21
21
3. Mix and apply materials 3.1 Texture coating materials are mixed to designed proportion and consistency in accordance with manufacturers’ recommendations and job specifications
3.2 Texture coat is applied to specified surfaces with trowel and to correct thickness 3.3 Texture coat is applied in accordance with manufacturers’ recommendations and job specifications
70 70
70
21 21
21
4. Finish and cure the texture coat
4.1 Texture coat is surface finished plumb/level in accordance with manufacturers’ recommendations and job specifications 4.2 Finished texture coat surface is cured in accordance with manufacturers’ recommendations and job specifications
71 71
21 21
5. Clean up 5.1 Work area is cleared and materials disposed of, reused or recycled in accordance with legislation/regulations/codes of practice and job specification
5.2 Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturers’ recommendations and standard work practices
17
17
GC
GC
BSBSBM301A Research business opportunities
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 113 of 115 Version 1: January 2008
Elements Performance Criteria Questions Practical Tasks
1. Identify business opportunities
1.1 Business opportunities are investigated and identified 1.2 Feasibility study is undertaken to determine likely business viability 1.3 Specialist services and sources of advice are identified where required 1.4 Impacts of emerging or changing technology including e-commerce, on business operations are evaluated 1.5 Practicability of business opportunity assessed in line with perceived risks, returns sought and resources available
72 72 72 72 72
22 22 22 22 22
2. Identify personal business skills
2.1 Financial and business skills available are identified and taken into account when business opportunities are researched 2.2 Technical competencies required in regard to the business opportunity identified and assessed in line with current competencies
of available personnel 2.3 Personal skills/attributes are assessed and matched against those perceived as necessary for a particular business opportunity 2.4 Business Risks are identified and assessed according to resources available and personal preferences
72 72
72 72
22 22
22 22
LMFGG2008A Glaze/reglaze residential windows and doors
1. Identify work requirements
1.1 Work requirements in the form of type of glass and the method of fixing are identified from work instructions 1.2 Workplace health and safety requirements for glazing/reglazing of windows and doors, including personal protection needs, are
observed throughout the work 1.3 The process for fitting glass to window and door frames is identified
5, 6, 11 1, 2
5, 6
GC GC
GC
2. Prepare for work 2.1 Work sequence is planned in a logical order to suit the job 2.2 Tools, equipment and materials (less glass and frames) are selected and checked prior to use to ensure that they are
appropriate for the work, serviceable and in a safe condition 2.3 Type of glass to be fitted and frames are selected to match:
− customer order − existing glass type − requirements for security, noise or light control − Australian Standards
2.4 Glass is checked for type, size and imperfections 2.5 Glass fixing method is selected according to:
− specification − type of glass and frame − security requirements − sealing methods − Australian Standards
2.6 Frame condition is assessed to ensure suitability for glazing in accordance with customer order and Australian Standards. Defective frames are reported for repair or replacement in accordance with workplace procedures
2.7 Fixing and sealing materials are prepared by mixing or cutting to length as appropriate
6 37
73
73 73
73 73
GC GC, 7
23
23 23
23 23
3. Identify site conditions and restraints
3.1 On-site difficulties are recognised and action taken to resolve in accordance with regulations and workplace requirements 3.2 Covering material is applied where necessary to protect existing fixtures and fittings
73 73
23 23
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 114 of 115 Version 1: January 2008
Elements Performance Criteria Questions Practical Tasks
3.3 Special characteristics of the window or door which may affect the finished job are identified and corrective action taken 73 23
4. Perform glazing 4.1 Frame is prepared to receive glass by: − checking size against specification − removing remains of glass and any sealants − cleaning − surface preparation (if required)
4.2 Glass is fixed to the frame using the selected method and in accordance with recognised industry procedures and Australian Standards
4.3 Solvents and sealants are used in accordance with manufacturers’ recommendations and Australian Standards 4.4 Excess sealing material is removed 4.5 Glass and frame are cleaned after fixing
74
74 74 74 74
23
23 23 23 23
5. Complete work 5.1 Completed installation is checked to ensure compliance with customer requirements and specifications 5.2 Tools, equipment and materials are cleaned and stored following workplace procedures 5.3 Work area is cleaned and left in a safe condition and rubbish disposed of as appropriate 5.4 Waste and scrap materials are removed for disposal or recycling as required 5.5 Workplace documentation is completed in accordance with workplace requirements
74 17 17 17 11
23 GC GC GC GC
MEM08012B Prepare surfaces by abrasive blasting (basic)
1. Determine job requirements
1.1 Work requirements determined from job sheet, instructions or other pre-determined specifications in accordance with standard operating procedures
1.2 Appropriate abrasive blasting process, equipment and media identified to meet job specification 1.3 Work site prepared for surface cleaning activities
75
75 75
24
24 24
2. Set up equipment 2.1 Appropriate equipment and any required consumables assembled, set up and prepared correctly and safely in accordance with manufactures specifications and standard operating procedures
2.2 Correct rust inhibitor for use in wet abrasive blast methods is selected where required 2.3 Pre operational checks are carried out on equipment and faults are rectified or reported for further action
75
75 75
24
24 24
3. Prepare surfaces using abrasive blasting
3.1 Blasting equipment is operated in accordance with standard operating procedures 3.2 Emergency shut down procedures can be undertaken 3.3 Work procedures undertaken to appropriate environmental requirements 3.4 Abrasive media disposal carried out in accordance with standard operating procedures 3.5 Blasting equipment is cleaned and disassembled and inspected in accordance with manufacturers specifications and standard
operating procedures 3.6 Equipment faults are recorded and reported in accordance with standard operating procedures
75 75 75 75 75
75
24 24 24 24 24
24
4. Inspect prepared surface
4.1 Surface preparation assessed for cleanliness and conformance with specifications 4.2 Faults or defects are rectified where required and inspection results recorded and reported in accordance with standard
operating procedures
75 75
24 24
RPL Assessor Kit BCG30603 Certificate III in Painting and Decorating
© State of Queensland (Department of Education, Training and the Arts) 2008 Page 115 of 115 Version 1: January 2008
Elements Performance Criteria Questions Practical Tasks
MEM08013B Prepare surfaces by abrasive blasting (advanced)
1. Determine job requirements
1.1 Work requirements determined from job sheet, instructions or other pre-determined specifications in accordance with standard operating procedures
1.2 Appropriate abrasive blasting process, equipment and media identified to meet job specification 1.3 Appropriate abrasive blasting media and equipment selected to meet job specification 1.4 Work site prepared for surface cleaning activities
76
76 76 76
25
25 25 25
2. Set up equipment 2.1 Appropriate equipment and any required consumables assembled, set up and prepared correctly and safely in accordance with manufactures specifications and standard operating procedures
2.2 Correct rust inhibitor for use in wet abrasive blast methods is selected where required 2.3 Pre operational checks are carried out on equipment and faults are rectified or reported for further action
76 76
76
25 25
25
3. Inspect surface prior to cleaning
3.1 Inspect work piece prior to cleaning in accordance with standard operating procedure 3.2 Identified faults/defects requiring remedial or pre treatment action are reported as required
76 76
25 25
4. Prepare surfaces using abrasive blasting
4.1 Blasting equipment is operated in accordance with standard operating procedures 4.2 Emergency shut down procedures can be undertaken 4.3 Work procedures undertaken to appropriate environmental requirements 4.4 Abrasive media disposal carried out in accordance with standard operating procedures 4.5 Blasting equipment is cleaned and disassembled and inspected in accordance with manufacturers specifications and standard
operating procedures 4.6 Equipment faults are recorded and reported in accordance with standard operating procedures
76 76 76 76 76 76
25 25 25 25 25 25
5. Inspect prepared surface
5.1 Surface preparation assessed for cleanliness and conformance with specifications 5.2 Faults or defects are rectified where required and inspection results recorded and reported in accordance with standard
operating procedures
76 76
25 25