rotor specifications / accessories · as41-96d 139 - a) 4,400 b) 4,400 c) 3,600 a) 3,010 b) 3,010...
TRANSCRIPT
Rotor Specifications / Accessories
ClickHereTS-41C
7115-087150-01 SC-2
S4096-02
B433 3315-TC04P3350-G01P3314-04P 3315-G07P
B241
Cover
AS41-96D
Adapter
3850-02P3815-10P B438-29 B438-5002BHClickHereTS-38C
ClickHereTS-7C
ClickHereTS-33C
ClickHereTS-4C
B437 3606-35P 3625C-01P 3615C-TC14P 3610C-G02PClickHereTS-37C
B438
‒ Rack ‒
Bucket
B407 0705-FA10P
‒ Bucket and Rack ‒‒ Bucket ‒
<Bucket,Adapter and Bucket Cover are included.>
Swing Out Rotors for AX-501・511・521
Main Bucket and rack
6015-026150-01ClickHereTS-6C
‒ Bucket ‒Main Bucket and rack
Main Bucket and rack
Main Bucket and rack
Main Bucket and rack
‒ Bucket ‒
‒ Bucket ‒
‒ Bucket ‒
‒ Bucket ‒
‒ Rack ‒
‒ Rack ‒
TS-4C
Bucket
Maximum Speed[rpm]
Bucket capacity
Microplate×2
Max. RCF[×G]
Rotating radius [mm]
Load dimensions (L×D×H) up to 128.5×86×32 mm
Rmin
S4096-02
-1,800 510 142
BucketRmax
Microplate 2×2S4096-02 - -- - - - 1 - - - ※1
Nominal Capacity [ml]
Mfr abbr.
Model name(Material)
BottomShape
AllowableRCF[×G]
Bucket Tube Dimension[φ×L mm]
Actual
Capacity[m
l]
Max. Number[Number×Parts]
Max. RCF[×G]
(Radius [mm])
AllowableSpeed[rpm]
TubeBARTCodeAdapter
Remarks
Applicable centrifuge AX-521、AX-511、AX-501
Rotor capacity 2 buckets
※1 Ensure that the microplate to be used is capable of being centrifuged with the AX-521/511/501.
List of Tubes Compatible with TS-4C
TS-41C
AllowableRCF[×G]
Actual
Capacity[m
l]
Max. Number[Number×Parts]
Max. RCF[×G]
(Radius [mm])
AllowableSpeed[rpm]
BARTCode
Remarks
- 1 -1×2
- - ※1,※2
- 1 - - - ※1
- 1 - - - ※1
deepwellplate
1×2plates withfilter
4×2micro plates
Nominal Capacity [ml]
Mfr abbr.
Model name(Material)
BottomShape
Bucket Tube Dimension[φ×L mm]
TubeAdapter
B241 AS41-96D
- - -Deepwell plate
- - -Plate with filter
- - -Microplate
※1 Prior to centrifugation, check the durability of plates in use.※2 When using TS-41C without bucket covers, maximum capacity (number of tubes×number of buckets) is 2×2 deep-well plates.
List of Tubes Compatible with TS-41C
Bucket Cover
Maximum Speed[rpm]
Rack Max. RCF[×G]
Rotating radius [mm]
Load dimensions (L×D×H) up to 128.5×86×80 mm
Load dimensions (L×D×H) up to 128.5×86×58 mm
RminBucket
Rmax
※2
B241
AS41-96D 139 -A) 4,400B) 4,400C) 3,600
A) 3,010B) 3,010C) 2,010
※1 Maximum allowable speeds and maximum RCFs listed are respectively different for each applicable model.※2 When using TS-41C without bucket covers, it accepts up to 2×1 deep-well plate and load dimensions (L×D×H) of 128.5×86×90mm.
※1 ※1
Applicable centrifuge
A) AX-521
B) AX-511
C) AX-501
Rotor capacity 2 buckets
TS-6C
50 ml Tube × 1
15 ml Tube × 2
Maximum Speed[rpm]
6150-0148139 3,890- 5,000
6015-02542,230- 3,800 138
RminRmaxBucket capacity/
BucketRack capacity/
RackMax. RCF[×G]
Rotating radius [mm]
1 × 4
1 × 4
6 × 4
4 × 4
5,000
3,800
3,400
3,860(138)
5,000 3,890(139)
5,000 3,890(139)4,000 3,580(139)
5,000 3,890(139)
2,230(138)
1,780(138)3,800 2.230(138)
6150-01
6015-02
50ml
50ml
15ml
15ml
15ml
IW9330-050
A1500-04
φ35×100
P-16.5S (G)
P-16.5S (G)
352196 (PP)352095 (PS)
※1
BDF
BDF
COR
COR
NEG
NEG
NEG
430791 (PP)430766 (PP)430053 (PET) φ16×120
φ16×120φ16×120
φ29×116φ29×116φ29×116430829 (PP)
430304 (PET)430291 (PP)352070 (PP) φ30×115
φ16.5×105
φ16.5×105
φ17×120φ17×120
-
3,60012,00012,000
15,5003,60015,500
9,400
-
-
6,0001,800
(G) R
R
R
CCC
7
CCCCC
C
3
15
15
50
Nominal Capacity [ml]
Mfr abbr.
Model name(Material)
BottomShape
AllowableRCF[×G]
Bucket Tube Dimension[φ×L mm]
Actual
Capacity[m
l]
Max. Number[Number×Parts]
Max. RCF[×G]
(Radius [mm])
AllowableSpeed[rpm]
TubeBARTCodeAdapter
Remarks
※1 When using with adapter IWA 9330-050, the bottom rubber of the bucket should be removed.
List of Tubes Compatible with TS-6C
50ml centrifuge tube, round type
Applicable centrifuge AX-521、AX-511、AX-501
Rotor capacity 4 buckets
TS-7C
15 ml Tube × 8
15 ml Tube × 6
15 ml Tube × 6
15 ml Tube × 8
50 ml Tube × 2
50 ml Tube × 1
50 ml Tube × 1
Maximum Speed[rpm]
7050-02851572,150- 3,500
7150-01744,670- 5,000 167
7050-01854,000 2,810- 157
7215-06782,430 168- 3,600
7015-0885- 3,500 2,190 160
7115-08 79- 3,500 2,380 174
-- 1,600 145420SC-2
B407
B407
0705-10P2,600 1,170 155 115
7015-06852,320 1603,600-
TER Veno-Ject
0705-FA10P 3,100 1,670 155 115
RminRmaxBucket capacity/
BucketRack capacity/
RackMax. RCF[×G]
Rotating radius [mm]
5 ml Tube× 10
5 ml Tube× 10
It adopted a hermetically sealed structure equivalent to bucket designed and tested in accordance with the International Standard (Annex AA of the IEC 61010-2-020) to offer excellent sealing performance.
Collection bucket of floating cells
※1 A sleeve for Bucket Code No. 7050-01 is made of aluminum and for 7150-01 is stainless steel.The※2 The sleeves for Bucket Code No.7015-08 and 7015-06 are made of aluminum (silver) , and a sleeve for 7115-08 is aluminum (gold) and for 7215-06, aluminum (blue).
※2
※1
※1
※2
※2
※2
Not compatible with the AX-501
Applicable centrifuge AX-521、AX-511、AX-501
Rotor capacity 4 buckets
1 × 4
1 × 4
4 × 4
8 × 4
8 × 4
1 × 4
1 × 4
2 × 4
2 × 4
6 × 4
6 × 4
4 × 4
5,000
4,300
3,500
3,100
3,500
3,000
4,000
3,500
3,600
3,000
3,600
3,100
4,670(167)
5,000 4,670(167)
3,450(167)
2,190(160)
1,720(160)
2,380(174)
1,750(174)
2,810(157)
2,150(157)
2,430(168)
1,690(168)
2,320(160)
1,720(160)
7115-08
7150-01
7015-08
7050-01
7050-02
7215-06
7015-06
50ml
50ml
15ml
50ml
50ml
15ml
50ml
50ml
15ml
15ml
15ml
15ml
15ml
15ml
15ml
15ml
15ml
IW9330-050
A1500-04
IW9330-050
A1500-04
IW9330-050
A1500-04
φ35×100
φ35×100
P-16.5S (G)
P-16.5S (G)
352070 (PP)430304 (PET)
φ35×100
P-16.5S (G)
P-16.5S (G)
352196 (PP)352095 (PS)
P-16.5S (G)
352196 (PP)352095 (PS)
P-16.5S (G)
352196 (PP)352095 (PS)
P-16.5S (G)
352196 (PP)352095 (PS)
※2
※2
※1
※1
※1
BDF
BDF
BDF
BDF
BDF
BDF
COR
COR
COR
COR
NEG
NEG
NEG
NEG
NEG
NEG
NEG
NEG
NEG
NEG
430791 (PP)430766 (PP)430053 (PET) φ16×120
φ16×120 φ16×120
COR 430791 (PP)430766 (PP)430053 (PET) φ16×120
φ16×120 φ16×120
COR 430791 (PP)430766 (PP)430053 (PET)
430791 (PP)430766 (PP)430053 (PET)
φ16×120 φ16×120 φ16×120
COR φ16×120 φ16×120 φ16×120
φ29×116 φ29×116
φ29×116 φ29×116 φ29×116
φ29×116
430829 (PP)
430829 (PP)
430304 (PET) 430291 (PP)
430291 (PP)
352070 (PP) φ30×115
φ16.5×105
φ16.5×105
φ16.5×105
φ16.5×105
φ16.5×105
φ16.5×105
φ16.5×105
φ30×115
φ17×120 φ17×120
φ17×120 φ17×120
φ17×120 φ17×120
φ17×120 φ17×120
BDF
COR φ29×116 φ29×116 φ29×116 430829 (PP)
430304 (PET) 430291 (PP) 352070 (PP) φ30×115
-
-
-
3,600 12,000 12,000
3,600 12,000 12,000
3,600 12,000 12,000
3,600 12,000 12,000
15,500 15,500
15,500 3,600 15,500
3,600
9,400
-
-
-
-
-
-
-
9,400
6,000 1,800
6,000 1,800
6,000 1,800
6,000 1,800
15,500 3,600 15,500
9,400
(G)
(G)
(G)
R
R
R
R
R
R
R
R
R
R
C C C
C C 2
C C
C C
7
A
5
4
1 C C
C C
C C C
C C
C C C C C
C C C C C
C C C
C
3
15
15
50
15
15
15
15
15
50
50
Nominal Capacity [ml]
Mfr abbr.
Model name(Material)
BottomShape
AllowableRCF[×G]
Bucket Tube Dimension[φ×L mm]
Actual
Capacity[m
l]
Max. Number[Number×Parts]
Max. RCF[×G]
(Radius [mm])
AllowableSpeed[rpm]
TubeBARTCode
Adapter
Remarks
※1 When using with adapter IWA 9330-050, the bottom rubber of the bucket should be removed.※2 Only four holes of the center of the bucket can be used.
List of Tubes Compatible with TS-7C-1
10 × 4
10 × 4
1 × 4
2,600
3,100
2,800
1,600
1,170(155)
1,670(155)
1,360(155)
420(145)
B407
SC-2
5ml
5ml
8ml
0705-10P
0705-FA10P
(PET)φ13.2×80.3
352235 (PS)352058 (PS)352008 (PS)352052 (PS)
352063 (PP)352053 (PP)352002 (PP)
※1Sealed Bucket
BDF
φ12×75φ12×75φ12×75
φ12×75 φ12×75φ12×75φ12×75
TER 1,200
3,0003,0003,000
1,400 1,4001,4001,400
R
R
R R R R R R
C
B
9
5
5
8
Nominal Capacity [ml]
Mfr abbr.
Model name (Material)
Bottom
Shape
Allowable RCF[×G]
Bucket Tube Dimension [φ×L mm]
Actual
Capacity[m
l]
Max. Number [Number ×Parts]
Max. RCF [×G]
(Radius [mm])
Allowable Speed [rpm]
Tube BART Code
Rack
Remarks
TER Veno-Ject
It adopted a hermetically sealed structure equivalent to bucket designed and tested in accordance with the International Standard (Annex AA of the IEC 61010-2-020) to offer excellent sealing performance.
-
List of Tubes Compatible with TS-7C-2
Collection bucket of floating cells
TS-33C
※2 A rotor becomes sealed bucket specificstions by optional [bucket cap kit B433].
This bucket, which has been tested and certified by the Health Protection Agency (HPA), UK to be compliant with the International Standard (Annex AA of the IEC 61010-2-020), meets requirements for biohazard safety.
※1 Maximum allowable speeds and maximum RCFs listed are respectively different for each applicable model.
Applicable centrifuge
A) AX-521
B) AX-511
C) AX-501
Rotor capacity 4 buckets
Maximum Speed[rpm]
Bucket capacity/Bucket
Rack capacity/Rack
Max. RCF[×G]
Rotating radius [mm]
Rmin
B433
Rmax
82169
※1Bucket cap kit B433
250 ml Tube ×1
3350-TC01P74167
50 ml Tissue Culture Tube×1
3350-G01P74161
50 ml Tube×1
3315-TC04P74167
15 ml Tissue Culture Tube×4
3315-G07P78161
15 ml Tube ×7 PAXgene Blood RNA Tube
3314-04P105167
14 ml Tube ×4
3307-07P85159Veno-Ject Ⅱ Tube
7 ml Tube × 7
3305-07P
91147Veno-Ject Ⅱ Tube5 ml Tube ×7
CAP433-1 GASKET
Component
-
-A) 4,800B) 4,800C) 4,100
A) 4,350B) 4,350C) 3,180
A) 4,800B) 4,800C) 4,100
A) 4,300B) 4,300C) 3,140
A) 4,800B) 4,800C) 4,100
A) 4,150B) 4,150C) 3,030
A) 4,800B) 4,800C) 4,100
A) 4,300B) 4,300C) 3,140
A) 4,800B) 4,800C) 4,100
A) 4,150B) 4,150C) 3,030
A) 4,000B) 4,000C) 4,000
A) 2,990B) 2,990C) 2,990
A) 2,600B) 2,600C) 2,600
A) 1,200B) 1,200C) 1,200
A) 2,700B) 2,700C) 2,700
A) 1,200B) 1,200C) 1,200
※1※1
B433
250ml
NAL
3120-0250 φ61.8×127.7(PPCO) F 13,200
3121-0250 φ61.2×131.9(HDPE) F 8,000250
3122-0250 φ61.8×127.6(PC) F 27,500
3127-0250 φ60.0×128.8(FEP) F 4,000
1 1×4
※2
225ml
BDF 352075352090 φ61×137(PP) C 7,500 225
175ml
BDF 352076 φ61×118(PP) C 7,500 175
3350-TC01P
50ml
COR
430291 φ29×116(PP) C 15,500
2 50430304 φ29×116(PET) C 3,600
430829 φ29×116(PP) C 15,500
1×4
BDF 352070 φ30×115(PP) C 9,400
3350-G01P
50ml
NEG φ35×100(G) R 3 50 1×4
3315-TC04P
15ml
COR
430053 φ16×120(PET)
(PET)
C 3,600
430766 φ16×120(PP) C 12,000
430791 φ16×120(PP) C 12,0004 15 4×4
BDF
BDF
352095 φ17×120(PS) C 1,800
352196 φ17×120(PP) C 6,000
3315-G07P
15mlNEG P-16.5S φ16.5×105(G) R 15
7×4
φ15.3×105.8R 5,000
5
3314-04P
14ml
BDF
352017 φ17×100(PS) R 1,400
352057 φ17×100(PS) R 1,4006 14 4×4
352018 φ17×100(PP) R 3,000
352059 φ17×100(PP) R 3,000
3307-07P
7ml
Veno-Ject Ⅱ Tube7ml φ13.2×101.6R 1,200 8 7 7×4
3305-07P
5ml
φ13.2×80.3R 1,200 7 5 7×4Veno-Ject Ⅱ Tube 5ml
TER
2.5ml2.5
-
Adapter
※3
Nominal Capacity [ml]
Mfr abbr.
Model name(Material)
BottomShape
AllowableRCF[×G]
Bucket Tube Dimension[φ×L mm]
Actual
Capacity[m
l]
Max. Number[Number×Parts]
Max. RCF[×G]
(Radius [mm])
AllowableSpeed[rpm] ※1
TubeBARTCode
Adapter
Remarks
PAXgene blood collection tube
50ml centrifuge tube round type
※3 A rotor becomes sealed bucket specificstions by optional [bucket cap kit B433].
This bucket, which has been tested and certified by the Health Protection Agency (HPA), UK to be compliant with the International Standard (Annex AA of the IEC 61010-2-020), meets requirements for biohazard safety.
Bucket cap kit B433 CAP433-1 GASKETComponent
-
-A)4,800B)4,800C)4,100
A)4,150B)4,150(161)C)3,030
※1 Maximum allowable speeds and maximum RCFs listed are respectively different for each applicable model. ※2 This item can only be used at the set temp of 4℃.
List of Tubes Compatible with TS-33C
A)4,800B)4,800C)4,100
A)4,350B)4,350(169)C)3,180
A)4,600B)4,600C)4,100
A)4,000B)4,000(169)C)3,180
A)4,800B)4,800C)4,100
A)4,350B)4,350(169)C)3,180
A)4,800B)4,800C)4,100
A)4,300B)4,300C)3,140
A)4,300B)4,300C)4,100
A)3,450B)3,450C)3,140
A)4,800B)4,800C)4,100
A)4,300B)4,300(167)C)3,140
A)4,300B)4,300C)4,100
A)3,450B)3,450(167)C)3,140
A)4,800B)4,800C)4,100
A)4,300B)4,300(167)C)3,140
A)3,100B)3,100C)3,100
A)1,790B)1,790(167)C)1,790
A)4,800B)4,800C)4,100
A)4,300B)4,300(167)C)3,140
A)4,800B)4,800C)4,100
A)4,150B)4,150(161)C)3,030
A)2,700B)2,700C)2,700
A)1,360B)1,360(167)C)1,360
A)4,000B)4,000C)4,000
A)2,990B)2,990(167)C)2,990
A)2,600B)2,600C)2,600
A)1,200B)1,200(159)C)1,200
A)2,700B)2,700C)2,700
A)1,200B)1,200(147)C)1,200
※1
TS-37C
Rmin
Rmax
15 ml Tissue Culture Tube× 14
50 ml Tissue Culture Tube× 515 ml Tissue Culture Tube× 2
50 ml Tube × 5
※ Figure shows an example of use for 3650-G05P
3625C-01P
3610C-G02P
3650-TC05P
3650-G05P
B436
3615-G16P
3614C-18P
3615-TC14P
3602C-36P
3605C-48P
3606C-35P
AS36C-96D
※2
※3
※4
Microplate × 4 ※3Deepwell plate × 2 ※2
Microtube × 36
5 ml Tube × 48
6 ml Tube × 35
15 ml Tube × 16
100 ml Tube × 2
14 ml Tube × 18
250 ml Tube × 1
Maximum Speed[rpm] RminRmax
Bucket capacity/Bucket
Rack capacity/Rack
Max. RCF[×G]
Rotating radius [mm]
※1 Up to 4×50 ml and 2×15 ml tubes can be loaded together. ※2 Load dimensions (L×D×H) are up to 128.5×86×90mm.※3 Load dimensions (L×D×H) are up to 128.5×86×58mm.※4 50 ml tubes and 15 ml tubes cannot be loaded together.
1061813,200 2,070
1061793,200 2,050
1061773,200 2,030
106183 ※13,200 2,100
1061823,200 2,080
1061833,200 2,100
1181763,200 2,020
1241833,200 2,100
1301833,200 2,100
1301683,200 1,920
-1823,200 2,080
3750-G06P
3750-TC06P
3715-G24P
3715-TC16P
3,200 2,030 177 106
3,200 2,100 183 106
3,200 2,080 182 106
3,200 2,100 183 106
50 ml Tube × 6
15 ml Tube × 24
15 ml Conical Tube× 2
15 ml Conical Tube× 16
50 ml Conical Tube× 6
Remarks
Applicable centrifuge
Rotor capacity
AX-521
4 buckets
3,200
2,040(181)
2,070(178)
3,200 2,050(179)
3,200 2,100 (183)
3,200 2,100 (183)
2,900 1,720 (183)
2,900 1,720 (183)
3,200 2,030 (177)
3,200 2,080 (182)
3,200 2,100 (183)
2,600 1,330 (176)
2,600 1,330 (176)
3,200 2,020 (176)
3,200 2,020 (176)
B436
3120-0250
3121-0250
3122-0250
3127-0250
3123-0250
φ61.8×127.7
φ61.2×131.9
φ61.8×127.6
φ60×128.8
φ61.9×145.8
352075
250 ml
250 ml
225 ml
175ml
352076
φ61×137
φ61×118
3625C-01P
3610C-G02P
3650-TC05P
3615-G16P
3650-G05P
3614C-18P
3615-TC14P
100ml
50ml
50ml
15ml
15ml
15ml
φ45×120
(G)
(G)
(G)
430053
430766
430791
352196352095
φ30×115
φ29×116
φ29×116
φ29×116
φ16×120
φ16×120
φ16×120
φ17×120φ17×120
P-16.5S φ16.5×105
352059
352057
352017352018
φ17×100
φ17×100φ17×100
φ17×100
14ml
250
225
175
※1
100
50
50
15
15
15
14
φ35×100
C
C
C
C
C
C
C
CC
COR
BDF
COR
BDF
COR
BDF
BDF
(PP)
(PP)
(PP)
(PET)
(PP)
(PP)
(PET)
(PP)
(PP)
(PS) (PP)
15,500
3,600
15,500
9,400
3,600
12,000
12,000
6,000 1,800
3,600
12,000
12,000
6,000 1,800 1,400
3,000
1,400 3,000
(PC)
(PPCO)
(HDPE)
(PC)
(FEP)
352090
BDF
BDF
NEG
NEG
NEG
27,500
13,200
8,000
27,500
4,000
7,500
7,500
1×4
5×4
2×4
2×4
5×4
16×4
14×4
18×4
1
2
4
4
3
5
6
7
3124-0010
C
C
F
F
F
F
R
R
R
R
R
R
R
430291
430304
430829
352070
430053
430766
430791
352196352095
φ16×120
φ16×120
φ16×120
φ17×120φ17×120
NAL
NAL
C
C
C
CC
(PET)
(PP)
(PP)
(PS)
(PP)
(PP)
(PP)
(PS)
(PS)
RackNominal Capacity [ml]
Mfr abbr.
Model name (Material)
Bottom
Shape
Allowable RCF[×G]
Bucket Tube Dimension [φ×L mm]
Actual
Capacity[m
l]
Max. Number [Number ×Parts]
Max. RCF [×G]
(Radius [mm])
Allowable Speed [rpm]
Tube BART Code Adapter
Remarks
-
-
-
List of Tubes Compatible with TS-37C-1
※1 Usable only with 4℃ setting .
3,200 2,100 (183)
3,200 2,100 (183)
2,600 1,380 (183)
3,200 1,920 (168)
3,200 2,100 (183)
B436
3602C-36P
3605C-48P
3606C-35P
AS36C-96D
φ14.5×83
JA1000
JA2000
JA3000
JA4000
6 ml
5 ml
4 ml
352002
352053
352063
352058
352008
φ12×75
φ12×75
φ12×75
φ12×75
φ12×75
352235 φ12×75
352052 φ12×75
φ12×72
φ11×42
φ11×41.5
φ11×41.51.5ml
2ml
15ml
15ml
15ml
50ml
50ml
6
5
4
※1※1
※1
※1
2
1.5
Deepwell plate
Microplate
※2
※2
※2
(-)
BDF
SIO
EPP
EPP
EIK
3,000
3,000
3,000
1,400
1,400
1,400
25,000
25,000
25,000
1,400
35×4
48×4
48×4
48×4
24×4
36×4
2×4
4×4
8
9
A
B
4
R
R
R
R
R
R
R
R
(PP)
(PP)
(PP)
(PP)
(PP)
(PP)
(PS)
(PS)
(PS)
(PS)
(PS)
(PS)
R
C
C
C
(PS)
(PS)
(PS)
RackNominal Capacity [ml]
Mfr abbr.
Model name(Material)
BottomShape
AllowableRCF[×G]
Bucket Tube Dimension[φ×L mm]
Actual
Capacity[m
l]
Max. Number[Number×Parts]
Max. RCF[×G]
(Radius [mm])
AllowableSpeed[rpm]
TubeBARTCodeAdapter
Remarks
Safe-Lock Tube
Safe-Lock Tube
Shionogi Tube
Microtube 3810
- - - - -
-
-
- -
List of Tubes Compatible with TS-37C-2
430291 φ29×116(PP) C 15,500
430304 φ29×116(PET) C 3,600
430829 φ29×116(PP) C 15,500
352070 φ30×115(PP) C 9,400
430053 φ16×120(PET) C 3,600
430766 φ16×120(PP) C 12,000
430791 φ16×120(PP) C 12,000
352095 φ17×120(PS) C 1,800
352196 φ17×120(PP) C 6,000
3750-TC06PCOR
BDF
COR
BDF
50 6×4 3,200 2,100(183)
15 2×4
3,200 2,100(183)
1,720(183)
3,200
2,900
2,100(183)
5 15
3715-G24P
NEG P-16.5S φ16.5×105(G) R - 24×4 3,200 2,080(182)
3
6
3750-G06P
NEG 50ml centrifuge tube, round type φ35×100(G) R - 50 6×4 3,200 2,030(177)
3715-TC16PCOR
430053 φ16×120(PET) C 3,600
15 16×4
3,200 2,100(183)430766 φ16×120(PP) C 12,000
430791 φ16×120(PP) C 12,000
BDF352095 φ17×120(PS) C 1,800 2,900 1,720(183)
352196 φ17×120(PP) C 6,000 3,200 2,100(183)
※1 Tubes must be placed in every other rack hole.※2 Prior to centrifugation, check the durability of plates in use.
B43892
92
92
92
92
92
92
92
B438-2994
B438-1507BH99
B438-96 -4,200 3,100 157
4,000 3,310 185
185 99
B438-5002BH
4,000 3,310
3802-EP24P3,500
4,200 3,650 185
1,780 130
3810-N20P3,500 2,270 166
3815-16P3,500
3806-EK20P3,500 2,330 170
2,370 173
3815-10P3,500 2,380 174
3850-02P3,500 2,380 174
3850-N04P3,500 2,380 174
3850-04P3,500 2,380 174
923805-FA16P
3,500 2,080 152
TS-38C
Maximum Speed[rpm] RminRmax
Bucket capacity/Bucket
Rack capacity/Rack
Max. RCF[×G]
Rotating radius [mm]
Rmin
Rmax
※ Figure shows an example of how 3815-10P is used in B438.
15 ml Tissue Culture Tube× 7
Microplate × 1
Load dimensions(L×D×H)up to 128.5×86×33 mm
50 ml Tissue Culture Tube× 215 ml Tissue Culture Tube× 2
250 ml Tube × 1
10 ml Tube × 20
Microtube × 24
6 ml Tube × 20
50 ml Tube × 2
15 ml Tissue Culture Tube× 10
15 ml Tube × 16
5 ml Tube × 16
50 ml Tissue Culture Tube× 4
50 ml Tube × 4
This bucket, which has been tested and certified by the Health Protection Agency (HPA), UK to be compliant with the International Standard (Annex AA of the IEC 61010-2-020), meets requirements for biohazard safety
It adopted a hermetically sealed structure equivalent to bucket designed and tested in accordance with the International Standard (Annex AA of the IEC 61010-2-020) to offer excellent sealing performance.
-
-
-
-
※1 Load dimensions (L×D×H) are up to 128.5×86×33mm.
※1
Applicable centrifuge AX-521、AX-511
Rotor capacity 4 buckets
430291 φ29×116 (PP)
430304 φ29×116 (PET)
430829 φ29×116 (PP)
352070 φ30×115 (PP)
3118-0050 φ28.8×107 (PC)
(PC)
3119-0050 φ28.8×106.7 (PPCO)
(PPCO)
φ35×100 (G)
(PET)
(PP)
(PP)
(PP)
(PP)
(PP)
(PP)
(G)
- 50 2×4 3,500 2,380 (174)
430053 φ16×120
430766 φ16×120
430791 φ16×120
352095 φ17×120 (PS)
(PS)
(PS)
(PS)
(PS)
(PS)
3,000 1,750 (174)
352196 φ17×120 3,500 2,380 (174)
P-16.5S φ16.5×105 - 15 16×4 3,500 2,370 (173)
JA1000 φ14.5×83
φ14.5×83
φ14.5×83
φ14.5×83
-
JA2000 -
JA3000 -
JA4000 -
3118-0010 φ16.1×81.7
3119-0010 φ16.0×81.4
φ12×72 - 4 3,500 2,080 (152)
3850-04P
3850-N04P
3850-02P
3815-10P
3815-16P
3806-EK20P
3810-N20P
3802-EP24P φ11×42 2
φ11×41.5
φ11×41.5
B438
50ml
50ml
50ml
15ml
15ml
6ml
10ml
4ml
5ml
2ml
1.5ml
COR
BDF
NAL
NEG
COR
BDF
NEG
EIK
NAL
SIO
EPP
EPP
15,500
3,600
15,500
9,400
50,000
50,000
3,600
12,000
12,000
1,800
6,000
50,000
50,000
25,000
25,000
25,000
6 20×4
8
50
40
15
24×4
4×4
4×4
10×4
1.5
3,500
3,500
3,500
3,500
3,500 20×4 (166) 2,270
3,500 (130) 1,780
2,380 (174)
2,380 (174)
2,380 (174)
2,330 (170)
3
5
6
7
1
2
4
9
C
C
C
C
C
C
C
C
C
(PP)
(PP)
(PP)
(PS)
φ12×75
φ12×75
φ12×75
φ12×75 (PS)
2,800 1,330 (152) φ12×75
3805-FA16P
BDF
3,000
3,000
3,000
1,400
1,400 5 16×4
3,500 2,080 (152)
E
R
R
R
R
R
(PS) φ12×75
φ12×75 (PS)
1,400
1,400
R
R
R
R
R
R
R
R
R
R
R
R
R
C
C
C
352002
352053
352063
352008
352052
352058
352235
Nominal Capacity [ml]
Mfr abbr.
Model name (Material)
Bottom
Shape
Allowable RCF[×G]
Bucket Tube Dimension [φ×L mm]
Actual
Capacity[m
l]
Max. Number [Number ×Parts]
Max. RCF [×G]
(Radius [mm])
Allowable Speed [rpm]
Tube BART Code
Adapter
Remarks
Safe-LockTube
Safe-Lock Tube
Microtube 3810
Shionogi Tube
50mlcentrifugetube, round type
List of Tubes Compatible with TS-38C-1
Nominal Capacity [ml]
Mfr abbr.
Model name(Material)
BottomShape
AllowableRCF[×G]
Bucket Tube Dimension[φ×L mm]
Actual
Capacity[m
l]
Max. Number[Number×Parts]
Max. RCF[×G]
(Radius [mm])
AllowableSpeed[rpm]
TubeBARTCode
Adapter
Remarks
C-5002BH
C
C
C
C
C
C
C
C
C-1507BH
C
C
C
C
B438-96
DMicroplate 1×4 (-) ※2
430291 φ29×116 (PP)
430304 φ29×116 (PET)
430829 φ29×116 (PP)
352070 φ30×115 (PP)
(PET)
(PP)
(PP)
(PP)
430053 φ16×120
430766 φ16×120
430791 φ16×120
352095 φ17×120 (PS) 2,900 1,740 (185)
352196 φ17×120 4,000 3,310 (185)
B438
B438
50ml
15ml
COR
BDF
COR
BDF
15,500
3,600
15,500
9,400
3,600
12,000
12,000
1,800
6,000
50
15
2×4
7×4
4,000
4,000
3,310 (185)
3,310 (185)
B
C
(PET)
(PP)
(PP)
(PP)
430053 φ16×120
430766 φ16×120
430791 φ16×120
352095 φ17×120 (PS) 2,900 1,740 (185)
352196 φ17×120 4,000 3,310 (185) 15ml
COR
BDF
3,600
12,000
12,000
1,800
6,000
15 2×4
4,000 3,310 (185)
(PPCO)
(PP)
(PP)
B438-29
-
-
-
-
- - - - - - - --
3120-0250 φ61.8×127.7
3121-0250 φ61.2×131.9 (HDPE)
3122-0250 φ61.8×127.6 (PC)
(PC) 3123-0250 (3124-0010)
φ61.9×145.8 3,590 (182)
3127-0250 φ60.0×128.8 (FEP) ※1 ※1
352075
(352090)
φ61×137 225
250ml
250ml
225ml
175ml
NAL
NAL
BDF
BDF 352076 φ61×118
13,200
8,000
27,500
27,500
4,000
7,500
7,500 175
1×4
250
4,200
(185) 3,650
(185) 3,650
A C
C
F
F
F
F
R
※1 Usable only with 4 ℃ setting. ※2 Prior to centrifugation, check the durability of plates in use.
This bucket, which has been tested and certified by the Health Protection Agency (HPA), UK to be compliant with the International Standard (Annex AA of the IEC 61010-2-020), meets requirements for biohazard safety It adopted a hermetically sealed structure equivalent to bucket designed and tested in accordance with the International Standard (Annex AA of the IEC 61010-2-020) to offer excellent sealing performance.
List of Tubes Compatible with TS-38C-2