System overview

by

We operate a quality management system based on EN ISO 13485:2016.

The company's products are certified in compliance with the provisions

European Directive 93/42/EEC.

High quality and safety standards

ISO13485Medical devices Quality management

"Quality assessment of dental implants by SEM and EDX analysis. A comparison of five one-piece implants" Dr. Dirk U. Duddeck, CleanImplant Foundation. ZWP 3/2016, p. 12-18.

“The only one-piece implant with no organic contaminants or inorganic residues."

The ROOTT Implant System is developed and constantly upgrading by TRATE AG in close cooperation with members of Open Dental Community.

The ROOTTCONCEPT has dispensed with the overcomplicated treatment procedures recommended by implant manufacturers who are limited by their products on the market.

The ROOTT philosophy is to create the ideal artificial tooth which organically integrates with existing biological structures in the simplest way.

Class leading surface purity (ZWP 3/2016, p. 12-18).

Innovations and developmentThe system development aims to reflect the collective view of independent dental practitioners throughout

the world thus TRATE AG closely cooperate with the Open Dental Community NPO (Luxembourg). This approach

avoids reliance on individual opinions and makes dentists free to select the method most suited to the patient.

Created for dentists by dentists

The COMPRESSIVE implant is a one-piece implant with compressive threads.

It is used for multiple unit restorations with immediate loading in the upper

and lower jaws with adequate bone tissue. It can be used in combination

with basal implants and allows flap and flapless placement. Abutment

direction can be adjusted up to 15° relative to the implant axis.

“The FILO Concept is based in three principles: Flapless surgery, Immediate Loading, and use of one-piece implants. Compressive is a multi-purpose implant and Basal is reserved to Pterygoid Area when it is necessary.”

Dr. Alvaro BastidaSpain

Special compressive threads

Immediate loading

Adjustable abutment slope angle

In accordance with FILO concept can be combined with Basal implants in pterygoid area for total rehabilitation

More clinical cases at Open Dental Community Group on Facebook

Clinical case

COMPRESSIVE implants

Bendable neck Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability

Wide range of sizesFrom short and wide to thin and long

Variety of prosthetic solutions From cemented fixation and burn-out angulated caps to telescopic caps with screwed retention and CAD-CAM solutions on multiunit platforms.

Universal set

6 mm → 20 mmø 3.0 mm → ø 5.5 mm

Tooth socket preparation with bone volume saving drills and Compressive Screws allows to match your sterile implant perfectly.

L

α

⌀ 2.3

10°

⌀oi

⌀ ai

o - occlusal diameter (mm); i - intraosseous diameter (mm); a - apical diameter (mm); n - neck diameter;2α - total internal angle (°); s - intraosseous square area (mm ); i = internal.

Compressive implants

21

13

3

⌀ii

⌀o

⌀a

⌀i

⌀n

⌀3.5

⌀ 5.5 ⌀ 5.0⌀ 4.5 ⌀ 4.0⌀ 3.5 ⌀ 3.0

⌀i ⌀ii|⌀a ⌀ai|

S α|

oi 2.05 n 2.05

oi 2.46 n 2.05

oi 2.95 n 2.05

oi 3.05 n 2.35

oi 3.55 n 2.35

oi 4.04 n 2.55

L 10 mm

L 12 mm

L 14 mm

L 16 mm

L 18mm

L 20mm

L 8 mm

L 6 mm

C3010

C3012

C3014

C3016

C3018

C3020

C3008

C3006

2.4 | 1.41.9 | 0.973 | 7

2.3 | 1.31.7 | 0.786 | 6

2.4 | 1.31.9 | 0.799 | 5

2.4 | 1.41.7 | 0.8

118 | 4

2.4 | 1.3 1.7 | 0.7

128 | 4

2.4 | 1.31.7 | 0.7

143 | 4

2.4 | 1.41.9 | 0.958 | 9

2.4 | 1.41.9 | 0.943 | 12

C3510

C3512

C3514

C3516

C3518

C3520

C3508

C3506

2.6 | 1.61.9 | 0.982 | 10

2.6 | 1.61.8 | 0.897 | 8

2.6 | 1.51.8 | 0.7111 | 7

2.6 | 1.61.8 | 0.8

128 | 6

2.7 | 1.71.8 | 0.8

146 | 5

2.6 | 1.61.8 | 0.7161 | 5

2.6 | 1.61.9 | 0.965 | 13

2.6 | 1.61.9 | 0.949 | 18

C4010

C4012

C4014

C4016

C4018

C4020

C4008

C4006

2.9 | 1.81.9 | 0.892 | 13

2.8 | 1.81.8 | 0.8

109 | 11

2.9 | 1.81.8 | 0.8128 | 9

2.9 | 1.81.8 | 0.8

146 | 8

2.9 | 1.81.8 | 0.8

164 | 7

2.9 | 1.81.8 | 0.7

180 | 6

3.1 | 2.02.4 | 1.282 | 27

3.1 | 2.02.4 | 1.259 | 23

C4510

C4512

C4514

C4516

C4518

C4520

C4508

C4506

3.4 | 1.92.4 | 1.0117 | 13

3.3 | 1.92.4 | 0.9140 | 10

3.3 | 1.92.3 | 0.9162 | 9

3.3 | 1.92.3 | 0.884 | 8

3.3 | 1.92.2 | 0.8

206 | 7

3.3 | 1.92.2 | 0.8230 | 6

3.6 | 2.22.9 | 1.4

100 | 16

3.5 | 2.12.9 | 1.473 | 22

C5010

C5012

C5014

C5008

C5006

3.7 | 2.22.6 | 1.2131 | 16

3.8 | 2.42.8 | 1.4163 | 13

3.6 | 2.22.4 | 0.9179 | 11

4.0 | 2.53.2 | 1.8112 | 20

3.9 | 2.43.2 | 1.782 | 27

C5510

C5512

C5514

C5508

C5506

3.8 | 2.42.5 | 1.0139 | 19

4.0 | 2.52.5 | 1.1167 | 15

3.8 | 2.32.3 | 0.8191 | 13

4.2 | 2.73.3 | 1.8121 | 24

4.2 | 2.73.3 | 1.888 | 33

Compressive implantswith short neck

3 mm1.5 mm

BendableGingiva H<1 mm

Sinus area

BendableGingiva H<1 mm Sinus area

⌀ 4.5

⌀ 4.0

L 10 mmL 8 mmL 6 mm

C4006s

C4506s

C4008s

C4508s

C4010s

C4510s

More clinical cases at Open Dental Community Group on Facebook

BASAL implants are used to create multiple unit restorations in the upper and lower jaws.

Can be placed in extraction sockets and in healed bone. The structural characteristics allow

placement in height and width deficient bones. Can be placed with flap or flapless technique.

Can be used to bypass the mandibular nerve, and for engagement of the cortical bone

at the fusion of the pterygoid with the maxilla. Can be used in combination

with compressive implants. Can be adjusted up to 15° relative to the implant axis.

Ideal for resorbed ridges

Immediate loading

Placement in the socket of an extracted tooth

Excellent protection from inflammation around the implant

Abutment adjustment angle up to 15°

Dr. Ducko AurelSlovakia

BASAL implants

Clinical case

Different surfaces Polished, sandblasted and anodized

Long polished bendable neck Depending on the length of the implant

the abutment can be bent up to 15° as long as the implant is placed in sound bone

Polished surface protects from accumulation of bacteria at the cervical part of the implant

New Basal SS –Super Safe implant

Wide range of sizesFrom short and wide to thin and long

Smart instrument sets Universal set consisting of 12 drills to use with any implants type or size of Roott open implant system.

8 mm → 26 mmø 3.5 mm → ø 10.5 mm

L

α

⌀ 2.3

10°

⌀oi

⌀ ai

o - occlusal diameter (mm); i - intraosseous diameter (mm); a - apical diameter (mm); n - neck diameter;2α - total internal angle (°); s - intraosseous square area (mm ); i = internal.

Basal implants

21

13

ln

⌀ii

⌀o

⌀a

⌀i

⌀n

⌀3.5

⌀ 3.5

⌀i 3.1⌀ii 1.6

⌀oi 1.4n 2.05

6 mmln 1.5

s 76a 18

B3506

8 mmln 3

s 57a 13

B3508

10 mmln 3

B3510s 73a 6

12 mmln 3

B3512s 92a 5

14 mmln 3

B3514s 105a 5

16 mmln 5

B3516s 117a 5

18 mmln 7

B3518s 140a 4

20 mmln 7

B3520s 164a 3

22 mmln 7

B3522s 183a 3

24 mmln 7

B3524s 203a 2

26 mmln 7

B3526s 226a 2

⌀ 4.5

⌀i 4.2⌀ii 2.0⌀oi 1.7n 2.35

s 82a 13

s 105a 6

B4508 B4510s 137a 5

B4512s 151a 5

B4514s 166a 5

B4516s 201a 4

B4518s 239a 3

B4520s 268a 3

B4522s 299a 2

B4524s 335a 2

B4526

⌀ 5.5

⌀i 4.3⌀ii 2.1

⌀oi 1.4n 2.35

s 108a 10

s 115a 9

B5508 B5510s 147a 7

B5512s 170a 6

B5514

L

α

⌀ 2.3

10°

⌀oi

⌀ ai

o - occlusal diameter (mm); i - intraosseous diameter (mm); a - apical diameter (mm); n - neck diameter;2α - total internal angle (°); s - intraosseous square area (mm ); i = internal.

Sandblasted basal implants

21

13

ln

⌀ii

⌀o

⌀a

⌀i

⌀n

⌀3.5

⌀ 3.5

⌀i 3.1⌀ii 1.6

⌀oi 1.4n 2.05

6 mmln 1.5

s 76a 18

B3506ss

8 mmln 3

s 57a 13

B3508ss

10 mmln 3

B3510sss 73a 6

12 mmln 3

B3512sss 92a 5

14 mmln 3

B3514sss 105a 5

16 mmln 5

B3516sss 117a 5

18 mmln 7

B3518sss 140a 4

20 mmln 7

B3520sss 164a 3

22 mmln 7

B3522sss 183a 3

24 mmln 7

B3524sss 203a 2

26 mmln 7

B3526sss 226a 2

⌀ 4.5

⌀i 4.2⌀ii 2.0⌀oi 1.7n 2.35

s 82a 13

s 105a 6

B4508ss B4510sss 137a 5

B4512sss 151a 5

B4514sss 166a 5

B4516sss 201a 4

B4518sss 239a 3

B4520sss 115a 18

B4506ss

TRA TOE TOEA TOES

External platform

8

abutment level

REF

TitaniumRotational

TitaniumAnti-Rotational

TitaniumRotational

Short

⌀ 4

PlasticRotational

⌀ 5.9

⌀ 3.9

⌀ 4.5

10

Transfers

REF

Analogues

ANAPlastic

Rotational

ANETitanium

Anti-Rotational

Titanium caps

TCE0 TCE1 TCE2 TCE3

abutment bottom level

REF

1 mm 2 mm 3 mm0 mm

⌀4.9

abutment top level

H⌀4.9⌀4.6

⌀4.2

TCES0 TCES1

abutment bottom level

REF

1 mm0 mm

abutment top level

⌀4.6⌀4.2

TCEXS1 TCEXS2

abutment bottom level

REF

1 mm 2 mm

abutment top level

H⌀4.7

⌀4.3

TCES22 mm

H⌀4.9

2

Short

Extra short

PEEK caps

PCE0 PCE1 PCE2 PCE3

abutment bottom level

REF

1 mm 2 mm 3 mm0 mm

⌀4.9

abutment top level

H⌀4.9⌀4.6

⌀4.2

PCES0 PCES1

abutment bottom level

REF

1 mm0 mm

abutment top level

⌀4.6⌀4.2

PCEXS1 PCEXS2

abutment bottom level

REF

1 mm 2 mm

abutment top level

H⌀4.7

⌀4.3

PCES22 mm

H⌀4.9

2

Short

Extra short

Burnout parts

BOP A0 A15 A25

abutment level

REF

straight with step

15° angulated 25° angulatedstraight

7.7

⌀5.2

⌀4.9 ⌀3

0.75

15° 25°

Titanium caps for two-piece implants

TCK0 REFTCK1 TCK2 TCK3

TCKXS1 REFTCKS0 TCKS1 TCKS21 mm 0 mm 1 mm 2 mm

abutment bottomlevel

0 mm 1 mm 2 mm 3 mm

abutment bottomlevel

4.7

2

⌀4.5

⌀4.1⌀4.4

⌀4.8

5.5

H

H

H

H⌀4.2 ⌀4.6

⌀5⌀5

6.3

Two-component Rootform implant with combined thread and reliable tapered

connection is intended for single and multiple restorations with immediate

and delayed loading in the upper and lower jaws in all types of bone tissue.

Implant can be placed by flap or flapless approach with subcrestal position

of the implants. Implant placement is also possible immediately following

tooth extraction, as long as sufficient bone tissue is available.

High primary stability in all bone types

Active self-tapping thread

Reliable implant-abutment connection

Dr. Mohamad El MohebFrance

More clinical cases at Open Dental Community Group on Facebook

Clinical case

ROOTFORM implants

Highly stable and secure connection Precision cone and internal hex, connection accurate +/- 0.007 mm

Wide range of sizesFrom short and wide to thin and long

Universal instrument set

6 mm → 16 mmø 3.0 mm → ø 5.5 mm

Multifunctional part CRE Made from Ti6Al4V. Can be used as: Carrier for implant insertion (up to 40 N/cm) Abutment for immediate loading Base for individual gingiva former Transfer for open/close tray

⌀0

L

⌀a

⌀i

α

⌀ 2.5

10.3°

M1.6x0.356H

⌀ii

⌀ai

o - occlusal diameter (mm); i - intraosseous diameter (mm); a - apical diameter (mm); 2α - total internal angle (°); s - intraosseous square area (mm ); i = internal.

Two-piece implants

TiGr23

⌀ 5.5 ⌀ 4.8 ⌀ 4.2 ⌀ 3.8 ⌀ 3.5

L 6 mm

4.9 | 4.54.8 | 2.4137 | 29

R55064.2 | 3.84.1 | 1.7114 | 29

R48064.2 | 3.64.1 | 1.9

106 | 26.5

R42063.8 | 3.43.7 | 1.695 | 28

R38063.5 | 3.33.4 | 1.885 | 24

R3506

L 8 mmR5508

4.9 | 4.54.8 | 2.3177 | 23.6

R48084.2 | 3.84.1 | 1.7147 | 23.6

42083.6 | 3.23.5 | 1.2125 | 21.2

R38083.8 | 3.43.7 | 1.3128 | 21.2

R35083.5 | 3.33.4 | 1.7111 | 20

⌀ 3.0

L 10 mmR5510

4.9 | 4.54.7 | 2.3220 | 17

R48104.2 | 3.84.0 | 1.6182 | 17

R42103.6 | 3.23.4 | 1.2182 | 15.4

R38103.8 | 3.43.6 | 1.2159 | 15.4

R35103.5 | 3.23.3 | 0.8137 | 21

R30103.0 | 2.52.8 | 1.4114 | 14

L 12 mmR5512

4.9 | 4.54.7 | 2.2263 | 13.6

R48124.1 | 3.84.0 | 1.5217 | 13.6

R42123.5 | 3.23.4 | 1.1182 | 12.2

R38123.7 | 3.43.6 | 1.2190 | 12.2

R35123.4 | 3.23.3 | 0.7

164 | 16.6

R30123.0 | 2.52.7 | 1.4137 | 9.8

L 14 mmR5514

4.8 | 4.54.6 | 2.1304 | 11.4

R48144.1 | 3.83.9 | 1.4

249 | 11.4

R42143.5 | 3.23.3 | 1.1

209 | 9.8

R38143.7 | 3.43.5 | 1.1221 | 10.2

R35143.4 | 3.23.2 | 0.7

188 | 13.8

R30143.0 | 2.52.5 | 1.4159 | 7.5

L 16 mmR5516

4.7 | 4.54.5 | 2.1 346 | 9.8

R48164.0 | 3.83.8 | 1.4285 | 9.8

R42163.4 | 3.23.1 | 0.8

234 | 9.8

R38163.6 | 3.43.4 | 1.0

249 | 9

R35163.3 | 3.23.1 | 0.6215 | 12

R30162.9 | 2.42.4 | 1.4178 | 6

⌀i ⌀ii|⌀a ⌀ai|

S α|

Regular

Individual (PEEK)

Gingiva formers

GFN0 GF0

⌀ 3.5

1

⌀ 4.0

NarrowBone build-up

GF1 GF2 GF3 GF4 GF5 GF6 GF7H 3.1 mm 3.8 mm 4.8 mm 5.8 mm 6.8 mm 7.8 mm 8.8 mm

implant level

⌀ 5

H

REF

implant level

H 3.8 mm 5.8 mm 7.8 mm

GFN2 GFN4 GFN6

H

REF

⌀ 4.0

GFIREF

⌀ 8

8.8

implant level

Transfers & implant analogs

TOS

7

implant level

REF

⌀ 4.0

TO

⌀ 4.0

TR (+TC cap)

⌀ 5.0

TRD

⌀ 4.5

SPCODigital

AN

⌀ 4.0

1215

10

13.5

Open tray Close tray

TCFree transfer cap with each transfer

TC

H

implant level

A1REF A2 A3 A4H 9.3 mm 10.3 mm 11.3 mm 12.3 mm

⌀ 2.1⌀ 3.5

⌀ 4.8

6°

2.8 3.4 5.4 6.4

Straight anatomical abutments

Abutments

Straight abutments for conometric prosthetic solutions

implant level

A1KREF A2K A3K A4K

⌀ 2.7⌀ 3.5

⌀ 4.8

6°

1.5 2.5 3.5 4.5

5

H

implant level

A1A25REF A2A25 A3A25 A4A25H 9.4 mm 10.4 mm 11.4 mm 12.4 mm

⌀ 2.2-3.2

⌀ 4.92.8

25° angulated anatomical abutments

5.44.43.4

25°

H

implant level

A1A15REF A2A15 A3A15 A4A15H 9.4 mm 10.4 mm 11.4 mm 12.4 mm

⌀ 2.1

⌀ 2.2-3.2

⌀ 4.82.8

15° angulated anatomical abutments

5.44.43.4

15°

⌀ 2.1

H

implant level

AT1REF AT2 AT3 AT4H 8.9 mm 10.4 mm 11.4 mm9.4 mm

⌀ 3

1.8

Transgingival abutments

5.54.53.5

How it worksPlace BP cap

on AT abutmentAdjust height

by cuttingUse wax for modelling

future crownFix crown toAT abutment

⌀ 2.1

⌀ 410° ⌀ 5.6

4

BP

BP — free burn out part with each transgingival abutment

B1REF B2 B3 B4H 4.3 mm 5.2 mm 6.2 mm 7.2 mm

B58.2 mm

H

implant level

⌀42.7

Attachments

6.85.84.83.8

Matrix housing

2010.701Titanium matrix housing

with PEEK insert

2010.702 2010.703Titanium matrix housing with attachment option

2010.722 Forming/fixing matrix

2010.725Mounting insert

2010.723 Processing spacer

2010.724Mounting collar

Model analog

2010.721REF

PEEK matrix housing with PEEK insert

REF

Retention inserts

2010.711 2010.712 2010.713 2010.714 2010.710 Extra-light

0.3 kg Light

0.75 kg Medium

1.2 kg Strong1.65 kg

Extra-strong2.1 kg

Ultra-strong2.55 kg

2010.715 REF

4

PCORREF PCO1 PCO2 PCO3H 1.5 mm 2.5 mm 3.5 mm

H⌀4

1.5 mm

⌀2.1

6

⌀2.94

implantlevel

PCO1s PCO2s PCO3s2.5 mm 3.5 mm1.5 mm

2

CAD-CAM platforms

M1REF M2 M3 M4H 3 mm 3.5 mm 4.5 mm 5.5 mm

Himplant

level

⌀4.5

Regular multi-unit abutment

Small multi-unit abutment

60°

M2.5

1.5

MS1REF MS2 MS3 MS4H 3 mm 3.5 mm 4.5 mm 5.5 mm

Himplant

level

⌀460°

M1.8

1.5

⌀4.5

Angulated multi-unit abutment

M1A15REF

H 3 mm

Himplant

level

60°

M2.5

M1A303 mm

M2A153.5 mm

M3A15

REF

H

4.5 mm

implant level

M3A30

M4A15

M4A30M2A303.5 mm 4.5 mm

5.5 mm

5.5 mm

M1A453 mm

REF

H

implant level

M3A45 M4A45M2A453.5 mm 4.5 mm 5.5 mm

15°

30°

45°

1.5

⌀4.5

H

60°

M2.51.5

⌀4.5

H

60°M2.5

1.5

One platform Multi-unit

multiunitlevel

L

α

1.5

⌀oi

⌀ 1.0

o - occlusal diameter (mm); i - intraosseous diameter (mm); a - apical diameter (mm); n - neck diameter;2α - total internal angle (°); s - intraosseous square area (mm ); i = internal.

Compressive M implants

⌀o

⌀1.5

⌀i

⌀n

60°

M2.5

⌀4.5

⌀1.5

2.7

⌀ 3.0⌀i 2.5n 2.05

6 mm 8 mm

s 62a 8

C3010m

10 mm

C3012ms 79a 6

12 mm

C3014ms 95a 5

14 mm

C3016ms 112a 4

16 mm

C3018ms 128a 4

18 mm

C3020ms 145a 3

20 mm

s 161a 3

C3008m

⌀ 3.5⌀i 2.8n 2.05

s 54a 15

C3506ms 72a 11

C3510m C3512ms 91a 9

C3514ms 109a 7

C3516ms 127a 6

C3518ms 146a 6

C3520ms 163a 5

s 182a 5

C3508m

⌀ 4.0⌀i 3.3n 2.55

s 63a 15

C4006ms 86a 11

C4010m C4012ms 108a 9

C4014ms 130a 7

C4016ms 152a 6

s 174a 6

C4008m

⌀ 5.0⌀i 4.3n 2.55

s 82a 15

C5006ms 111a 11

C5010m C5012ms 141a 9

C5014ms 170a 7

s 200a 6

C5008m

o - occlusal diameter (mm); i - intraosseous diameter (mm); a - apical diameter (mm); n - neck diameter;2α - total internal angle (°); s - intraosseous square area (mm ); i = internal.

Compressive MP implants

L

4°

1.5

⌀ 1.0

⌀o

⌀2.0

⌀i

⌀2.5

60°

M2.5

⌀4.5

2.7

⌀oi

⌀n

⌀ii

C3518mp C3520mp C3522mp C3524mp C3526mpC3516mp⌀ 3.5

16 mm

i 2.8i 1.7is 175

18 mm 20 mm 22 mm 24 mm 26 mm

i 2.7i 1.7is 175

i 2.5i 1.5is 198

i 2.6i 1.5is 220

i 2.6i 1.5is 248

i 2.6i 1.5is 297

⌀ 4.5i 3.9i 1.8is 256

i 3.7i 1.7is 293

i 3.6i 1.5is 332

i 3.4i 1.4is 369

i 3.3i 1.2is 402

i 3.3i 1.3is 443

C4518mp C4520mp C4522mp C4524mp C4526mpC4516mp

Transfers & analogue

TOM

ANM11

abutment level

M platformAnalogue

11

TRM (+TC cap) SPCOMOpen tray Close tray Scan-body

13

8.5

2.7

Platforms & abutments

PCOM

4.5

abutment level

9

AM ABMUTitanium base Straight

abutmentBurnout

abutment

ABMUAAngulated burnout

abutment

9 9

15°

Gingiva formers

GFM0

Habutment level

3 mm

GFM14 mm

GFM25 mm

GFM36 mm

GFM4

abutment level

7 mm

GFM58 mm

GFM69 mm

GFM710 mm

GFMN0

Habutment level

3 mm

GFMN25 mm

GFMN47 mm

GFMN69 mm

⌀5.2 Narrow

⌀5.6

L

α

1.2

⌀oi

⌀ 1.0

o - occlusal diameter (mm); i - intraosseous diameter (mm); a - apical diameter (mm); n - neck diameter;2α - total internal angle (°); s - intraosseous square area (mm ); i = internal.

Compressive MS implants

⌀o

⌀1.5

⌀i

⌀n

60°

M1.8

⌀4

⌀ii

2.5

⌀ 3.0⌀i 2.5⌀i 1.5in 2.05

6 mm 8 mm

s 63a 8

C3010ms

10 mm

C3012mss 79a 6

12 mm

C3014mss 95a 5

14 mm

C3016mss 112a 4

16 mm

s 128a 4

C3008ms

s 54a 15

C3506mss 72a 11

C3510ms C3512mss 91a 9

C3514mss 109a 7

C3516mss 127a 6

s 146a 5

C3508ms⌀ 3.5⌀i 2.8⌀i 1.8in 2.55

Transfers & analogue

TOMS

ANMS11

abutment level

MS platformAnalogue

11

TRMS (+TC cap) SPCOMSOpen tray Close tray Scan-body

13

8.5

2.5

Platforms & abutments

PCOMS

4.5

abutment level

9

AMS ABMUSTitanium base Straight

abutmentBurnout

abutment

ABMUSAAngulated burnout

abutment

9 9

15°

Gingiva formers

GFMS0

Habutment level

3 mm

GFMS14 mm

GFMS25 mm

GFMS36 mm

GFMS4

abutment level

7 mm

GFMS58 mm

GFMS69 mm

GFMS710 mm

GFMNS0

Habutment level

1 mm

GFMNS22 mm

GFMNS44 mm

GFMNS66 mm

⌀2.2

Narrow

⌀5.6

⌀4.6

1.5 ⌀3.8⌀4.6

⌀4

DС55xx6-14 mm

DС50xx6-14 mm

DС45xx6-20 mm

DС40xx6-20 mm

DС35xx6-20 mm

DС30xx6-20 mm

Rootform drills

Compressive drills

Pilot drills

Form drills

DB2020

D25xx

D2020

D28xx

D32xx

D36xx

D40xx

D43xx

D46xx

D50xx

D53xx

D55066 mm

2-16 mm

2-16 mm

2-16 mm

2-16 mm

2-16 mm

2-16 mm

2-16 mm

2-16 mm

2-16 mm

6-16 mm 2-16 mm

Screwdrivers 1.25 mm

SD SDL SDXL SDLB SDXLB

6

SDH SDHL SDHXL SDAO

For ratchet For handpiece For AO handle

Ball hex Ball hex

5.511 11

50 50

10 15

40

25

44

Screw removal

Parallel pin

Extension tool

ETH

ETAO

SR P2 ET

Insertion tools

implant level

IT ITL ITH ITHL ITAO

abutment level

ITES ITE ITEL ITEXL ITEHL ITEAOFor ratchet For handpiece For AO handle

ITEH

For ratchet For handpiece For AO handle

Internal platform

External platform

1.59

37

17 12

22

44

10

20

11

21

41

6

M platform

abutment level

ITM ITML ITMXL ITHEAOFor ratchet For AO

handle

21

41

61

carrierlevel

10.7

10

30

50 58

ITHE ITHEL ITHEXL

MS platform

abutment level

ITMS ITMSL ITMSXLFor ratchet

21

41

61

10

ITM0 ITM10

Universal instrument set TRS-S

Removal toolSR

Insertion toolsITE ITITEL ITL ITHE

Hex driversSDLSD

Pilot drills

Form drills

DB2020

D2516

D2020

D2816

D3216

D3616

D4016

D4316

D4616

D5016

D5316

D5506

Torque wrench TW50

Direction indicator DIR

Direct wrench DW

Upcoming events

27-30 November 2019Paris ADF

Stand 4L08

4-6 February 2020Dubai AEEDC

Stand 6F01

24-26 April 2020Singapore IDEM

Stand 6G21

Association Dentaire Francaise Exhibition

UAE International Dental Conference & Arab Dental Exhibition

International Dental Exhibition and Meeting

Regular courses

Bone growth over implant

by Henri Diederich DDS

May 11-13, London

by Dr. Dainius Karpavicius

January 24-25, Kaunas, Lithuania

by Dr. Mohamad El Moheb

January 24-25, Paris

Cortically Fixed @ Once

Conometric solutions

Start kits

20 dental implant partsincluding 3 implants

– TRY3 –119 parts including 22 implants

and instrument set

– ROOTT –46 dental implant partsincluding 10 implants

– TRY10 –

Try unique features at affordable price

2019.11

TRATE AGSeestrasse 588806 Bäch Switzerland

t +41 44 202 1919 f +41 44 202 1920info@trate.comtrate.comby