rochester gauges
TRANSCRIPT
-
7/23/2019 Rochester Gauges
1/20209
Gaug
IMPORTANT INFORMATION: Product must be installed
and used in strict conformance with NFPA Pamphlet 58 and/or
NFPA Pamphlet 54 and all other codes, regulations and manu-
facturer recommendations.
Failure to follow these codes, regulations and recommendations
could result in hazardous installation, bodily injury and/or death.
PRODUCT TRAINING SCHOOLS AVAILABLE. Contact a GEC
customer service representative for more information.
WARNING: LP Gas is extremely flammable and explosive.
Devices used for handling LP Gas and Anhydrous Ammonia must
be installed and used in strict conformance with NFPA Pamphlet
58 and 54 and all other codes, regulations and manufacturerrecommendations.
-
7/23/2019 Rochester Gauges
2/20210
How To Order A Gauge
1. Determine Tank Type
Above Ground
Under Ground
Top Mount
AngleMount
EndMount
Side Mount
CenterLine
"H" Dimension "H"
"H"
JR - 4 bolt
A = 2-1/32
SR - 4 bolt
A = 2-1/2
1-1/4 Thread 1 Thread
Top Mount
Angle Mount
Side Mount
End Mount
Tank configuration shown is appropriate for tanks built since the mid-1970s. If yours does not match, please call the Gas
Equipment Company location nearest you and we will be glad to help.
2. Determine Gauge Head Type
3. Determine Tank DiameterD = _______
From Tank Data Plate or
Measure Circumference (in inches) and divide by 3.14
4. Determine Riser Height: H = ________
Note: Riser height is the distance, in inches, from tank surface to
top of mounting flange or coupling for gauge.
5. Determine Mounting Position
Note: Pivot point of float must be at center line of tank.
Footring
Height
Distance
"H" Dimension
-
7/23/2019 Rochester Gauges
3/20
Common Junior & Senior
Float Assemblies - Top Mount
211
Adjustable Liquid Level Gau
Here is an adjustable, magnetic, liquid-level gauge which makes it a snap
to quickly and economically replace non-functional LP Gas gauges in the
field. Because one size adjustable gauges fit many tanks, the One
Gauge greatly reduces the number of spare gauges you need to stock.
The One Gauge is UL listed for LP gas service.
JuniorBrass Threaded
Adjustable Gauge
1 14" NPT Threaded
Senior, 4-Bolt Adjustable Gauges
Assembly Instructions
Junior, 4-Bolt Adjustable Gauges
1" NPT Threaded
Part # Adj. Stem Length Application
0049S02159 12 12 to 19 34 Above Ground
Part # Adj. Stem Length Application
0049S02207 12 12 to 19 34 Above Ground
Part # Adj. Stem Length Application
0049S02203 12 12 to 19 34 Above Ground
Part # Adj. Stem Length Application
0049S02160 12 14 to 19 34 Above Ground
Part # Tank Diameter
6857S11009 24
6857S13759 30
6810S14379 32
6857S17009 37.5
B6287-4
B6287-4
B6287-4
B6287-4
OLD GAUGE LENGTH
MARK OR SCRIBE
CENTERSHAFT AS SHOWN
STEP 1:
STEP 2:
ORIGINAL MARK
FROM STEP 1
CUT OFF EXCESS CENTERSHAFT
JUST BELOW MARK AS SHOWN
LOCKNUT GEAR HOUSING
CENTERSHAFT
STEP 3:
"R" LOGO
TO BE LOOSENED
CAREFULLY
RETIGHTEN
CHECK FOR FREE MOVING
PINION AND CLEAR HOLE
SELECT FLOAT ARM
TO FIT TANK
SHAFT IS NOW
RECESSED
INCREASE SUPPORT LENGTH
BACK TO OLD GAUGE LENGTH
TEMPORARILY ADJUST SUPPORT
SHORTER THAN THEMARK ON CENTERSHAFT
**NOTE: THESE ASSEMBLY INSTRUCTIONS ARE GOOD FOR MODEL #'S 6285-, 6287, 7287-, & 8987-
NEW GAUGE TO OLD GAUGE LENGTH
MARK NEW GAUGE
AS SHOWN
ORIGINAL MARK
LINES UP WITH
EDGE OF LOCKNUT
.
.
T A
OSK %
TA
MAX.
AT
N
L IQUID
LEVEL T
NDU O
EVGR
B O
L M
U
E95O
8060
120
100
2 7
5 -
3 3
D I A LNO.
U.S.A.
LAS TX.
UL105
0
U
UB
B
/ 50PP R
R OO
YL
ZI C
H
O
60R
5 0
70
FOR
NOT 50
R O C 40
USE
DO
ING
AS
OF TEX
GAU
TE R
G E S 30IN C .
H E S
FILL
DAL
20
20
TEMP.A 80 90F V L
B6287-4
.
.
T A
OSK %
TA
MAX.
AT
N
L IQUID
LEVEL T
NDU O
EVG R
B O
L M
U
E95O
8060
120
100
2 7
5 -
3 3
D IA L
NO.
U.S.A.
LAS TX.
UL105
0
U
UB
B
/ 50
PP R R OO
YL
ZI C
H
O
60R
5 0
70
FOR
NOT 50
R O C 40
USE
DO
ING
AS
OF TEX
GAU
TE R
G E S 30IN C .
H E S
FILL
DAL
20
20
TEMP.A 80 90F V L
B6287-4
STEP 4: INSERT BRASS BEARING,
0109-00495, THROUGH
OTHER SIDE OF GEAR HOUSING
STEP 5: FLOAT ARM TO BE INSERTED FROM
FRONT SIDE SO THAT SINGLE BLACK
MARK ON FLOAT ARM GEAR FITS
BETWEEN TWO WHITE MARKS ON
PINION GEAR.
STEP 6:
INSERT SCREW, 0040-00479,
WITH #1 PHILLIPS SCREWDRIVER
PROPERLY TIGHTENED
AT
STEP 7:
DIAL SHOULD READ AP PROXIMATELY
45-50% WITH FLOAT ARM AT 90
TO SUPPORT. MOVE FLOAT ARM
UP AND DOWN TO CHECK FOR FREE
MOVEMENT
-
7/23/2019 Rochester Gauges
4/20212
ASME Tank & DOT Cylinder Gauges
Rochester Gauge Information
Rochester gauges are the standard of excellence for measur-
ing LPG levels. Stainless steel bearing surfaces and self-align-
ing bevel gears ensure extremely long life.
The one-piece, die-cast plastic gear housing is designed to
protect gear operation. The nitrile float is another exclusive
development of Rochester engineers. This lighter float lets
Rochester use a lighter counter weight which lengthens gauge
life particularly where vibration is a factor. Dial chambers are
hermetically-sealed, moisture-proof and easily replaced with-
out exposing the contents of the tank.
The one-piece gauge head is die cast from a high-tensile
strength aluminum alloy. All Rochester 6200 Series gauges
are UL listed for LP gas service.
Senior, 4-Bolt Gauges
Furnished with gasket, dial, and mounting bolts.
#traP le*criCtloB onitpircseD tloBgnitnuoM
0826
2 1/2"
gnitnuompoT
)4( 5/ 61 42-"3826 ntuomelgnarodne,ediS
0926 Top mounting with 4" dial
3962 Side, end or angle mount
with 4" dial
Junior, Threaded Gauges
#*traP onitpircseD exH
1827 ngitnuompot,daehcniZ
4827 ntuomelgnarodne,ediS"2
Junior, 4-Bolt Gauges
Furnished with gasket, dial, and 4 mounting bolts.
#traP le*crictloB onitpircseD tlobgnitnuoM
18262 1/ 23
gnitnuompoT)4( 1/4 82-"
4826 ntuomelgnarodne,ediS
*Measured diagonally
*Measured diagonally
1-1/4" NPT Threaded
#*traP onitpircseD exH1837 tnuompoT
4837 ntuomdnE"2
1" NPT Threaded
#*traP onitpircseD exH
1898 tnuompoT "2
3/4" NPT Threaded
*Use B prefix for Brass head gauge, ie: B7384 Brass Head Gauge
-
7/23/2019 Rochester Gauges
5/20213
NH3 Gaug
The A6200 series gauges are designed to withstand the corro-
sive rigors of NH3 service. The A6400 series is all-stainless-steel
construction designed to withstand NH3 with chemical addi-
tives. All A prefix gauges are UL listed for NH3 service. These
gauges come standard with direct-reading percentage dials.
A6200 Series Gauge
#traP onitpircseD
84810S3235 orinuJ
20000S2005 orineS
Replacement NH3 Dials
Junior
, 4-Bolt GaugesFurnished with gasket, dial, and 4 mounting bolts.
#traP onitpircseD
1826A .gnitnuompotroF
.slaidgnidaer-tceridevirdottengamdradnatssedulcnI
4826A g.nitnuomelgnarodne,edisroF
#traP onitpircseD
0826A .gnitnuompotroF
.slaidgnidaer-tceridevirdottengamdradnatssedulcnI
3826A g.nitnuomelgnarodne,edisroF
Senior, 4-Bolt Gauges
Furnished with gasket, dial, and 4 mounting bolts.
SeniorN-Serve Gauges
All stainless steel construction.
Furnished with gasket, dial, and 4 mounting bolts.
#traP onitpircseD ertemaiDknaTroF
21000-0846A
eguaGevreS-N
"64
31000-0846A 1"4
For top mounting,
#traP onitpircseD
55800-5100 orinuJ
63800-5100 orineS
Replacement Gaskets - NH3 Compatible
-
7/23/2019 Rochester Gauges
6/20214
Lift Truck Gauges
Junior, 4-Bolt Gauges
#ledoM rednilyC
eziS gnitnuoM l #aiD
23-4826.bl41
.D.I"9
lasrevinU 23810S3435
93-4826 altnoziroH 89710S3235
5-1826 alcitreV 91810S3235
33-4826
.bl02
.D.I"21
lasrevinU 15810S3435
42-4826 altnoziroH 89710S3235
54-1826 alcitreV 81810S3235
43-4826
33 1/2 .bl
.D.I"21
lasrevinU 91710S3435
42-4826 altnoziroH 89710S3235
84-1826 alcitreV 02810S3235
53-4826
34 1/2 .bl
.D.I"21
lasrevinU 24810S3435
42-4826 altnoziroH 89710S3235
94-1826 alcitreV 12810S3235
64-4826
.bl06
.D.I"41
lasrevinU 91710S3435
54-4826 altnoziroH 89710S3235
05-1826 alcitreV 71810S3235
54-4826
.bl001
41 1/2"
latnoziroH 89710S3235
83-1826 alcitreV 31810S3235
93-1826 alcitreV 41810S3235
74-1826 alcitreV 61810S3235
#ledoM rednilyC
eziS gnitnuoM laiD
1204-4837 bl5.34,5.33,02 alsrevinU 91520S4175
This gauge measures the liquid contents of a horizontally mount-
ed lift truck cylinder. The gauge has a second scale for use when
the tank is stored vertically which reads OK or ADD.
The gauge head accepts a snap-on Junior dial and has 1 38"
[35] hex wrenching flats. The gauge support, center shaft and
float arm are constructed of a propane compatible thermoplas-
tic polymer material. This construction reduces the number of
parts and improves reliability and accuracy.
Junior, Polymer Construction Gauge
3/4" NPT Threaded
Perfect for most forklift cylinder replacement.
-
7/23/2019 Rochester Gauges
7/20
-
7/23/2019 Rochester Gauges
8/20216
Motor Fuel Gauges & Farm Tank Gauges
Motor Fuel Gauges
Farm Tank Gauges
For correct float-rod sizing and installation, refer to the figure below.
These lever-action gauges are designed for use in stationary
farm tanks or other tanks with flat heads. They are to be
mounted on the centerline in the middle of the head. The max-
imum recommended float length is 48".
#traP onitpircseD onitacilppA
3817F -eguaGnoitcA-reveL1 1/2 TPN"
htiwsknatrosknatmrafyranoitatS.sdaehtalf
50600S1005slaidlanoitcarF
s.knatyranoitatS
50600S2005 s.knatelibomrofdenepmadnoitarbiV
12 Tank height minus 2"
14
File notch near end of float rod
Tank Tank Rochester Gauge Head Mounting Dial
Dia.(") Mfg. Part # Stamp Angle Type*
8 H8LN 320Manchester 6244-00600 B** DR
Brunner 6244-605 H8AB Lower 45 DR
Brunner 6244-00032 DRH10AB 315
10 Brunner 6244-00046 DR
Manchester 6244-00353 H10C CENTER
DR
Brunner 6244-00047 DR
Brunner 6244-00094 H12C CENTER TS
Manchester 6244-00354 DR
12
Brunner 6244-00048 DR
Brunner 6244-00097H13C CENTER
TS
Brunner 6244-00054 DR
Manchester 6244-00334H14A 45
DR
Manchester 6244-00599 H14LN 320 DR
Brunner 6244-00049 DR
Brunner 6244-00100H14C CENTER
TS
13
14
Brunner 6244-00055 DR
Brunner 6244-00105 H16A 45 TS
Manchester 6244-00338 DR
Brunner 6244-00050 DR
Brunner 6244-00106 H16C CENTER TS
Manchester 6244-00604 B** DR
Brunner 6244-00056 DR
Manchester 6244-00340H18A 45
DR
Brunner 6244-00051 DR
Brunner 6244-00109 H18C CENTER TS
Manchester 6244-00357 DR
16
18
Brunner 6244-00058 DR
Manchester 6244-00342H20A 45
DR
Brunner 6244-00052 DRH20C CENTER
Manchester 6244-00358 DR
20
Brunner 6244-00074 DR
Manchester 6244-00181 H24A 45
DR
Brunner 6244-00073 DRH24C CENTER
Manchester 6244-00371 DR
24
30 Brunner 6244-00085 DRH30C CENTER
Manchester 6244-00384 DRH13LN 320
Brunner 6244-00344 DR
Brunner 6244-00343
H22A 45
DR
22H22C CENTER
*DR = Direct Read Dial TS = Twinsite Sender
**B = Brass Head
Zinc head gauge with heavy-duty magnet. Ideal with remote
reading replaceable Twinsite Sender.
-
7/23/2019 Rochester Gauges
9/20217
Bulk Storage Gaug
Specify prefix for appropriate dial & mountingDial PrefixC = Combination LPG/NH3.
Mounting PrefixX = When straddle mounting is required.
Y = When ordering gauge for 2" opening.
M = Special mobile.
V = Vertical tank.
When ordering specify: Liquid product and specific gravity.
Type vessel, inside diameter (in inches) & head type
(ellipsoidal, semi elliptical, hemispherical).
Prefix (see chart).
Model # for mounting location (top, side, 8" or 4" dial).
Trim # according to product compatibility requirements.*
Bolt hole location of mounting flange
If other than standard percent of total volume dial is required.
Top-mounted gauges require dimension from mounting flange
face to tank shell plus shell thickness.
Angle-mounted gauges require tank drawings for computing
proper gauge dimensions.
Rochester Magnetel Liquid Level Gauges are available in 4"
and 8" dial sizes. Standard calibration is percent of total tank
volume.
CombinationLPG/NH3
Straddle mounted
Side, end or anglemounted 8" dial
See trim chart
elpmaxerebmuntraP
xiferP l #edoM m #irT ertemaiD
XC 4236 11 8"01
#ledoM ngitnuoM zeislaiD
11-6336 opT"4
11-9336
elgnarodne,ediS11-2436"8
11-0636 opT
Magnetel Gauge Models
Materials Code/Trim # Chart
#mirT epyT
ecivreS
eguaG
egnalF
taolF
ecnalabretnuoC
gniraeB
troppus
kcolb
&taolF
troppus
gnibut
metS
evird
tengam
llA
rehto
strap
11- HNroGPL 3613epyT
leetssselniats
cniz-leetsllor-dloC
detalp
303epyT
leetssselniats IVocinlA
seires003
sselniats
leets
Trim 11 should be used on containers of 3500 WG or more. Gauges for vertical
tanks require drawings for computing proper gauge dimensions & mounting loca-
tions.
More trim levels available for other products.
Common Magnetel Configurations#traP nkaTfOretemaiD
48-11-2436C 4"8
801-11-2436C 8"01
031-11-2436C 0"31
Special calibration dials are available at extra cost.Please state requirements. Special gauges made to order.
-
7/23/2019 Rochester Gauges
10/20218
Transport Gauges
MagnetelRough Rider Gauges
The Rough Rider is designed to withstand the vibration and
shock inherent in mobile service. Their service life in over-the-
road and off-road transports carrying liquids including LP Gas,
NH3, and cryogenic liquids is unsurpassed. These gauges pro-
vide accurate indications of liquid level at a glance, making in-
convenient rotary gauges obsolete.
Rough Rider gauges are equipped with an exclusive spring
steel shock absorber on the float arm which substantially reduc-
es the stress that can quickly destroy conventional gauges.
Also available with 8" dials upon request.
Other size supports available by special order.
#traP aliD nkatforetemaiD
27-11-9336MC
"4
"27
97-11-9336MC 9"7
48-11-9336MC 4"8
69-11-9336MC 6"9
Specify prefix for appropriate dial & mountingDial PrefixC = Combination LPG/NH3.
D = Insulated extension for CO2 and other cryogenic liquids.
Mounting PrefixM = Special mobile mounting.
When ordering specify: Liquid product and specific gravity.
Type vessel, inside diameter (in inches) & head type
(ellipsoidal, semi elliptical, hemispherical).
Prefix (see chart).
Model # for mounting location (top, side, 8" or 4" dial).
Trim # according to product compatibility requirements.*
Bolt hole location of mounting flange
If other than standard percent of total volume dial is required.
Top-mounted gauges require dimension from mounting
flangeface to tank shell plus shell thickness.
Angle-mounted gauges require tank drawings for computing
proper gauge dimensions.
Common Rough Rider Configurations
EliminatorRotogauge Replacement
1" NPTA direct-reading float gauge that is a direct replacement for
rotary-type, dip-tube gauges in LP and NH3 storage tanks.
Only intended for use in tanks with fixed, liquid-level gauges.
#traP onitpircseD
0044R-3926P ni"44otpusknatyranoitatsroelibomroF
retemaid
0006R-3926P nahtretaergsknatyranoitatsroelibomroF
retemaiDni"06otpu&"44
0027R-3926P pu&"06nahtretaergsknatyranoitatsroF
retemaiDni"27ot
0048R-3926P pu&"27nahtretaergsknatyranoitatsroF
retemaidni"48ot
Ideal for LPG or NH3 bobtails and transports. Also available for CO2 use.
-
7/23/2019 Rochester Gauges
11/20219
Part Number
For Container Inside Diameter
For Use With For Dip Tube
(Ordered Separately)LPG or NH3
For Mobileor StationaryContainers
For StationaryContainers
Only
Standard
Dip Tube
Length
Standard
Dip Tube
Part No.
SideMounted
EndMounted
SideMounted
EndMounted
A9091R 30" - 45" 30" - 75" 30" - 45"
A9092R 46" - 61" 76" - 108" 46" - 61" 46" - 61"
A9093TS* A9093RS 62" - 79" 109" - 147" 62" - 79" 62" - 79"
A9094TS* A9094RS 80" - 99" 80" - 99" 80" - 99"
A9095TS* A9095RS 100" - 147" 100" - 147" 100" - 147"
Ellipsoidal Heads Hemispherical Heads
30" - 45"24"
36"
48"
60"
72"
A9091-M24.0
A9091-M36.0
A9091-M48.0
A9091-M60.0
A9091-M72.0
Bulk Storage & Transpo
1" Rotogages for Large Mobile and Stationary Containers
Rotogages are designed to provide an accurate determination of LP-Gas or anhydrous ammonia container contents. They mount in a stan-dard 1" NPT coupling on large mobile or stationary containers.
To operate the Rotogages, the vent valve is opened and the dip tuberotated slowly from the container vapor space to the liquid space. Thedifference in appearance of the discharge indicates when the liquid levelis reached. Dial readings then indicate the percentage of product in the
container.
Rotogage Dials
PartNumber Service Container Size
A9091-18L LP-Gas All Sizes
A9091-18LX* LP-Gas Over 1200 U.S. gallons
A9091-18N NH3 All sizes
Rotogage Ordering Information
* Supported Design
NOTE: The dip tube must be cut to the required length ( 12" of container inside diameter minus 534").Custom dip tube lengths available upon request.
3/4 Rotogages for Small Stationary and Mobile LP-Gas Containers
Rotogages are designed to provide accurate determination of LP-Gascontainer contents. They may be end or side mounted in a standard 34"NPT coupling on stationary or mobile containers. To guarantee accuratemeasurement, they should not be used on stationary containers thatexceed 60" I.D. or on mobile containers, subject to vibration, with an I.D.
of more than 24".
Part Number For Containerswith InsideDiameter
TankConnection
ValveSeat
Orifice
2070CO2071-L25.7 Up to 40"
34" M. NPTNo. 54
Drill Size2071-L39.7 Up to 60"
Rotogage Dip Tube
NOTE: The dip tube must be cut to the required length ( 12 of container inside diameter minus12"), when mounted on center line of tank.
* Dial permits higher filling level, as per NFPA 58, (1983) Par. 4-5.2.1, Table 4-5.2.1
-
7/23/2019 Rochester Gauges
12/20
R3D Dials - Remote Ready
220
Gauge Dials Junior & Senior
Part # Description
5844S01749 Senior Dial for LPG - For Above ground use
5002S00002 Senior Dial for NH3 - For Above ground use
Part # Description
5364S01951 Junior Snap-On Dial for 8981 Series Gauges5364S02383 Junior Snap-On Dial for 8944 Series Gauges
Part # Description
5343S01992 Junior Universal Dial 33.5# Cylinders
5343S01993 Junior Universal Dial 43# Cylinders
5374S02445 Junior Snap-On Dial 20 & 33.5# Duel Use Cylinders
5714S02591 Junior Snap-On Dial for 7384-4021
Part # Description
5323S01789 Junior Mobile Dial - Fractional
5323S01835 Junior Dial 10-82% for Vertical Cylinders
5323S01852 Junior Dial 5-88% for Vertical Cylinders
5343S01791 Junior Universal Dial 33.5# Cylinders
5323S01824 Junior Universal Dial 43# Cylinders
Part # Description
5323S01749 Replaced by R3D Dial # 5909S02733
5323S01813 Junior Dial for LPG ASME Underground Tanks 5-95%
5323S01848 Junior Dial for NH3 ASME Underground Tanks 5-95%
Part # Description
5909S02733 Rochester Junior Dial / ASME Above ground
5909S02799 Rochester Junior Dial / ASME Under ground
5986S02733 Rochester Senior Dial / ASME Above ground
5987S02787 JY Taylor Style A Dial
5988S02788 JY Taylor Style B Dial
Hermetically-sealed, moisture-proof, replaceable dial chambers are easily and safely removable under tank pressure. UV stabilized Jr.
plastic case will not corrode.
JuniorDirect Read Dials for ASME Tanks
JuniorDirect Read Dials for Mobile 4-Bolt Gauges
Junior
Direct Read Dials for 3/4 NPT Gauges
JuniorDirect Read Dials for 1 NPT Gauges
SeniorDirect Read Dials
5909S02733 5986S02733 5987S02787
5323S01789 5323S01835 5323S01791
5343S01992
5364S01951
5844S01749
5323S01813
5714S02591
-
7/23/2019 Rochester Gauges
13/20
-
7/23/2019 Rochester Gauges
14/20222
Gauge Accessories
#trPa onitpircseD
50000-3000 alid"8roflatsyrcssalG
80400-3000 alid"4roflatsyrcssalgderepmeT
01000-5100 edriuqerowt,latsyrc"8rednuteksaG
15400-5100 altsyrc"4rofteksaglennahC
91000-5100 dellifnolfeT,leetssselniatsdnuow-laripSteksagegnalfgnitnuoM
31400-0400 for 4" dialwercslaidleetssselniatS
10000S3900 etkcarbgnitnuomrebmahclaiD"4
30400-3900 etkcarbgnitnuomrebmahclaiD"8
Replacement Magnetel
Parts
#traP onitpircseD
21000-5136R erttimsnarTam02-4
Magnetel Transmitter
MagnetelMounting Flanges
Center LineBolt holes on center line
StraddleBolt holes span center line
Tank-mounting flanges are not included with Magnetel Gauges
and should be ordered separately.
NOTE: Flanges welded to tank with top and bottom holes on
the vertical centerline are standard with Rochester Gauges.
When the flange is attached so that the bolt holes span the cen-
terline (see drawing at the right), add the prefix X to the
Magnetel gauge model number.
#traP onitpircseD A"" B"" C""
92000-2200
leetSdegroF
21/2 dedaerhTTPN"
egnalFkceN
21/2" 1/2 TPN" 5/ 61"
03000-2200 leetSdegroF
ylnOegnalFgnidleW
00500-2200 leetSdegroF
ylnOegnalFgnidleW 13/ 61 dleW 5/ 61"
52500-2200
08dehcSTPN"2
.egnalFkceNdedaerhT
nodellatsniebtsuM(
.gfmybeguag
21/2" PTN"2 1/ 61"
"
2
2
2
434"
1"
A
BC
This transmitter is designed to fit Rochester model 6342 and 6360
Magnetel Float gauges with 8" dials. The transmitter provides a
current output of 4-20 mA proportional to the liquid volume in a
horizontal storage tank.
Magnetel Mounting
01250-2200 leetSdegroF
ylnOegnalFgnidleW
11250-2200 leetSdegroF
ylnOegnalFgnidleW 1" 21/ 23"1
1"
PTN"2
21/ 23"1dleW
#traP onitpircseD A"" B"" C""
Senior Gauge Mounting
-
7/23/2019 Rochester Gauges
15/20223
Gauge Accessori
Gaskets, LP Gas
Flat Buna N
Screws
#traP onitpircseD
41400-0400 daeHeguaGroinuJrofwercS
spillihProdettolSnoitanibmoC
51400-0400 daeHeguaGroineSrofwercS
spillihProdettolSnoitanibmoC
31400-0400 daeHeguaGroineSrofwercS
Stainless Steel for 4" Dial
61400-0400 JR & SeniorrofwercS
Dial Mounting
87400-0400 daeHeguaGroineSrofwercS
N-Serv A6480 Series
#traP onitpircseD
40000-5100 etksageguagroineS
70000-5100 etksageguagroinuJ
91000-5100
,teksagdnuowlaripS
daehSSrofdellifnolfet
22000-5100 O-ringeguagroineS
12000-5100 O-ringeguagroinuJ
Weather Cover For8" Dial
Weather Guard for8" Dial
Weather Guard for4" Dial
Weather Guards For Dials
#traP onitpircseD
10000S3200 aliD"8roFrevoCrehtaeW
20000S3200 aliD"4roFdrauGrehtaeW
30000S3200 aliD"8roFdrauGrehtaeW
-
7/23/2019 Rochester Gauges
16/20224
Pressure Gauges
Pressure Gauges
Especially designed in a variety of sizes and construction for the LP Gas & anhydrous ammonia industry.
Liquid Filled Pressure Gauges
NH3 Pressure Gauges
rebmuNtraP
erusserP
egnaR
laiD
eziS
esaC
lairetaM onitcennoC
003-LA8001 0#03-0
"2
leetS
1/4 mottob"004-LA8001
#004-0004-BS8001
1/4 kcab"004-BSS8001
sselniatS
leetS
rebmuNtraP
erusserP
egnaR
laiD
eziS
esaC
lairetaM onitcennoC
0610W 0#6-0
21/2" sselniatS
leetS1/4 mottob"2610W 0#51-0
4610W 0#04-0
948
J1446
J1458
W0164
1008AL-400
Part NumberPressure
RangeDial Size Case Material Connection
2411
0-30# 2
Brass 1/4 M. NPT3226A-3
J1442
Steel
1/4 Bottom
J2042 1/4 Back
2434-2 35 w.c. &
20 oz. (dual) 2-1/2
1/8 hose
2434A-2 1/4 hose
29276 0-35 w.c.Brass 1/4 M. NPT
55750-60#
2J1446
Steel 1/4 BottomJ1448
0-100#5576Brass 1/4 M. NPT
1178 2-1/2
J1458
0-300# 2
Steel 1/4 Bottom
948Brass
1/4 M. NPTJ2058 1/4 Back
J5563 4-1/2 1/4 Bottom
Part
Number
Pressure
RangeAccuracy Overpressure
Temperature
Limits
Dial
Size
Case
Material
Mounting
OrientationConnection
20200 - 20
of Water
+/- 2%
of full scale25 psig 20 to 140 4
Die Cast
AluminumVertical 1/8 F. NPT
MagnehelicDifferential Pressure Gauge
Magnehelic gauge is highly accurate with a guarantee within 2% of full scale. Using simple,
frictionless Magnehelic movement, it quickly indicates low air or non-corrosive gas pressures
either, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No
manometer fluid to evaporate, freeze or cause toxic or leveling problems.Portable Unit Includes: Carrying case, Magnehelic Gauge, 9 ft fo 3/16 I.D. rubber tubing,
standhang bracket and terminal tube with holder.
Standard Accessories: Two 1/8 NPT plugs for duplicate pressure taps, two 1/8 pipe thread to rub-
ber tubing adapter and three flush mounting adapters with screws.
Note: Do Not use with Hydrogen gas. Dangerous reactions will occur.
-
7/23/2019 Rochester Gauges
17/20225
Pressure Gauge Accessori
Pressure Gauge Snubbers
Protects pressure gauge from shocks and pulsations.
1449
Part # Description Size
1449 Stainless Steel 1/4 FNPT x 1/4 MNPT
Needle Valves
These valves are high quality, true throttling valves. Unlike most so-called needle valves,
both the body seat and stem are tapered to provide fine, precise control over a wide range
of adjustment without stem galling.
The 1224 may be used as a small, inexpensive shut-off valve between a pressure gauge
and bulk storage container to allow for convenient gauge replacement.
The 1314, 1316 and 1318 provide taper pipe thread by left hand hose connection threads
and are useful in a wide range of torch and fuel burner applications where an accurate throt-
tling action is required.
Part
Number
Inlet
Connection
Outle t
Connection Height Length
1224WA 14" M. NPT 14" M. NPT
1 916" 134"1314WA
916"-18 L.H.18" M. NPT
1316WA 14" M. NPT
1318WA 14" M. NPT 916"-18 L.H.
#traP dnetelnI dneteltuO
233-V 1/4 epipelamef" 1/4 epipelamef"
333-V 1/4 epipelam" 1/4 epipelam"
433-V 1/4 epipelamef" 1/4 epipelam"
533-V 1/4 epipelam" 1/4 epipelamef"
P5503-V 1/4 epipelamef" 1/4 epipelam"
P088-V otlipelbatsujda/wevlavezeeuqS
Rego Water Manometer Kit
The water manometer kit is especially suited for use with low pressureLP-Gas systems. It is ideal for pressure checks downstream of the lowpressure regulator and at the appliances.
PartNumber Description
1212 KIT Flexible Tube Water Manometer Kit
-
7/23/2019 Rochester Gauges
18/20226
Thermometers & Flow Indicator
The distance from the top of the mounting adapter to the end of the vane is the
A dimension. This dimension is dependent on the tee size, as shown above.
Indicates direction of flow of compatible liquids in pipelines at
working pressures up to 600 psig up to 160F. The indicator
must be installed in pipeline tees.
Specify Part Number and A Dimension
Flow Indicator
Other lengths available on special order.
eziSeeT A
noisnemiD
1 1/4 1x" 1/4 1x" 1/4" 1/4"
2" x 2" x 2" 1/4"
2 1/2 2x" 1/2" x 2" 1/4"
3" x 3" x 2" 3/4"
2 1/2 2x" 1/2 2x" 1/2"
2/w 1/2 gnihsub2"x" 43/4"
3" x 3" x 3"
gnihsub"2x"3/w 4 3/4"
3
3
3
4
#traP thgneL
52300-6826 1/4"
57400-6826 3/4"
3
4
#traP
84000S3105
Replacement Dial
A
LP & NH3Bimetal Thermometers
These 2", bimetallic thermometers are commonly used on LP-Gas & NH3 storage tanks, bobtails, and transports. They are rec-ommended for use only with thermowells.
The thermometer is made of type 304 stainless steel, and the
crystal is made out of extra-heavy, curved glass. The aluminum
dial has a white face with large black numbers for easy readabil-
ity. Actuation is by means of a highly sensitive bimetal element,
dampened to minimize vibration, attached to a pointer. The unit
is hermetically sealed.
Standard Features 12" MNPT
Dual Scale Calibration:
-90 to +130F, -70C to +50C, other ranges available
#traP onitpircseD "A"
Dimension
41100-0571
cillatemiB"2
retemomrehT
"4
51100-0571 6"
9-0571 9"
12-0571 12"
.08"
12" NPT Pipe Thread
A
-
7/23/2019 Rochester Gauges
19/20227
Tank Monitoring Equipme
The Centeron transmitter is attached to the tank gauge and accurate-ly measures tank levels and then sends the data to the Centeron con-troller (located inside the house) using robust DSSS wireless technolo-gy. The Centeron tank level monitor (TLM) includes sensing and FCClicense-free RF telemetry capabilities. The sensor head screws on the
existing float level gauge. Low cost installation and no maintenance.Centeron Tranmitter features:1. Magnetically adheres to the tank2. No field calibration3. Applies to domestic and bulk storage tanks4. Reports tank level and outside temperature5. No hard wiring required, wireless
Streamline Distribution With Robertshaw CenteronUsing non-intrusive, wireless tank-level monitors and advanced software, the Centeron system provides accurate, daily listings of tanks ready and
near-ready for fills, making unnecessary trips and emergency fills an expensive thing of the past. Fact is, Centeron can cut your refill trips by up to
50 percent. These unprecedented cost efficiencies make the economical Centeron system an ideal, profit-building solution for both non-degree-
day and degree-day sensitive operations. Its the convenient, money-saving way to streamline your entire LPG distribution process.
The Centeron controller receives wireless signals from Centeron moni-tor and then sends the data to the district host center or to our secure datacenter for use in operations management.Centeron Controller features:1. Uses DSSS broadband technology which is far superior to any other available
2. Easily attaches to any phone3. Will not interrupt a conversation in progress4. Can be remotely programmed for tank level thresholds, call windows
and telephone numbers.5. Unique phase and diverse antenna arrangement eliminates noise, fading
and signal blocking commonly found when using narrow band technolo-gy
Part # Description
5909S02733 Rochester R3D JR Dial
5986S02733 Rochester R3D SR Dial
5987S02787 JY Taylor R3D Style A Dial
5988S02788 JY Taylor R3D Style B Dial
Part # Temperature Sensor Inputs
TM-TC1T Yes 1:1
TM-TC1NT No 1:1
TM-TC4NT No 4:1
TM-TC20NT No 20:1
Part # Intervals in Minutes
TM-GM60 60
TM-GM120 120
TM-GM240 240
Part # Description
TM-MG8-10 Rochester Gauge with 10 ft. cable
TM-JY10-10 J Y Taylor Dial with 10 ft. cable
Gauge Dials
Domestic
Bulk Storage
Controller/Receiver
Transmitters (includes 5 ft. cable)
Part # Description
TM-RES-R Pkg. includes: TM-GM60, TM-TC1NT, 5909S02733
TM-RES-T Pkg. includes: TM-GM60, TM-TC1NT, 5987S02787
Domestic Tank Monitoring Package
Part # Description
TM-RS-228 Pkg. includes: Base Station, Remote Monitor (Dial NOT included)
Consumer Monitor Package
For Domestic applications
Select: 1. Transmitter & specify signal intervals.
2. Controller with or without Temperature sensor.
3. Appropiate type of domestic gauge dial(s).
The data center operates with a Call Block plan. This plan will allow all of your controllers to collectively draw from one block of prepaid calls. A
wide variety of Call Blocks will be offered in order to satisfy all Centeron customers. Inherent benefits of this plan include:
One simple invoice for all of your data center fees Current data for Call Block usage available online
Multiple controllers collectively draw from the same Call Block Reduction in price you pay per call
Refunds available for unused calls upon cancellation of service
Part # Description
TM-PC CABLE Serial interface cable- Controller to PC RS232 port
TM-GMCABLE-5R Additional 5 ft. cable for AG/UG GM monitors available
Accessories5909S02733 5323S02787/88
For Bulk Plant applications
Select: 1. Transmitter & specify signal intervals.
2. Controller without Temperature sensor and for appropi-
ate number of tanks (inputs).3. Appropiate type of bulk storage gauge dial(s).
TM-TC1NT
TM-RS-228
TM-GM60
-
7/23/2019 Rochester Gauges
20/20