robotics – 8. plates (2-sizes) plate with holes on 0.500" increments and 1/8" diamonds...
TRANSCRIPT
Robotics – 8
• Plates (2-sizes)• Plate with holes on
0.500" increments and 1/8" diamonds in between. Can be cut on 0.500" increments.
• Available in two sizes.
• Made from cold rolled steel, 0.046" thick, zinc plated.
• Base Plate 30x15 (2-pack)
• VEX Base Plates are designed to serve as a foundation for a variety of robotics applications.
• (2) Base Plates included
• 15-holes wide x 30-holes long
• Made from cold rolled steel, 0.046" thick, zinc plated.
• Angles (3-sizes)• VEX angle without
slots. Typically used for structural framing. Good strength on two axis.
• Can be cut on 0.500" increments.
• Made from cold rolled steel, 0.046" thick, zinc plated
• All items are (4) to a package.
• Rails (3-choices)• The Chassis Rails are part
of the larger VEX Chassis Kits. This rail has holes on 0.500" increments and another row in-between. This part is a versatile angle with one narrow side and one taller side.
• Made from cold rolled steel, 0.046" thick, zinc plated.
• All items are (4) to a package.
• C-Channels (3-sizes)• VEX C-channel has holes on
0.500" increments. This structural member is perfect for building bigger robots. Excellent strength and twist resistance.
• Six sizes available.• Made from cold rolled
steel, 0.046" thick, zinc plated.
• Each channel is segmented into cuttable 2.5" pieces
• Segmented Angle, 1x1x35 (4-pack)
• VEX angle without slots. Typically used for structural framing. Good strength on two axis.
• Can be cut on 0.500" increments.
• Made from cold rolled steel, 0.046" thick, zinc plated.
• All items are (4) to a package.
• Slotted Angles (2-sizes)• VEX angle with holes and
slots identical to the standard VEX kit. Can be cut to 5, 10, 15, 20 or 25 hole lengths. A mirror "Inverted" part is available.
• Length is 30 holes.• Made from cold rolled
steel, 0.046" thick, zinc plated.
• All items are (4) to a package.
• Bar 1x25 (8-pack)• VEX bar with holes
on 0.500" increments. Can be cut on 0.500" increments.
• Made from cold rolled steel, 0.046" thick, zinc plated.
• The item is (8) to a package.
• Pivot Gusset (6-pack)• Bracket allows parts
to be connected at any angle from 0 to 90 degrees. Can also be used as a corner gusset.
• Made from cold rolled steel, 0.046" thick, zinc plated.
• Sold in packs of 6.
• Angle Gussets (2-choices)
• Bent gusset for strengthening "T" joints. Slots on both main flanges allow for adjustment on two axis.
• Can also be used as a motor mount.
• Made from cold rolled steel, 0.046" thick, zinc plated.
• Sold in packs of 4 or 8.
• Plus Gussets (2-choices)
• Generic gusset for strengthening flat joints. Can be easily cut into a "T" gusset or an "L" gusset.
• Made from cold rolled steel, 0.046" thick, zinc plated.
• Sold in packs of 4 or 8.
• Bearing Pop Rivet (50-pack)
• Bearing Pop Rivets make mounting the Flats Bearing onto VEX structural component easy. Reusable; simply push the pin out from the back side.
• Speed up robot assembly.
• 50 ea of the Bearing Pop Rivets.
• Reusable.
• Screws 6-32 (2-choices)
• 6-32 Screw with Button Head. 5/64" VEX Allen Drive. High Strength Stainless Steel. Various lengths.
• Use for Motors and Servos only.
• High Strength Stainless Steel.
• Screws 8-32 (11-choices)
• 8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths.
• Standard Allen Drive VEX screw type.
• High Strength Stainless Steel.
• 8-32 x 0.125" Setscrew (32-pack)
• These 8-32 x 0.125" setscrews fit in VEX Shaft Collars. Use them as replacements or spare parts.
• 8-32 thread.• Use 5/64 Allen to
tighten.
• Nuts 8-32 (3-choices)• A nut is a type of
hardware fastener with a threaded hole. All VEX nuts are 8-32 threads.
• Keps Nuts have integral external tooth lock washer.
• Nylock nuts have internal nylon lock.
• Hex nuts are non-locking.
• 4" Zip Ties (100-pack)• Black Tie Wraps used to
hold together and manage cables, band rubber chords, or attach to rollers or tank tread to assist an intake mechanism.
• Tie together cables or rubber chords.
• Attach to rollers or tank tread to assist an intake mechanism.
• Rating of 18lbs.
• 11" Zip Ties (100-pack)
• Black Zip Ties used to tie larger objects like a pneumatic cylinder to metal or attach to rollers to assist an intake.
• Tie larger objects to metal.
• Attach to rollers to assist an intake.
• Rating of 30lbs.