safe access systems - totalsite supplies · • long term piece of mind - 25 year warranty options:...

SAFE ACCESS SYSTEMSwww.totalsitesupplies.co.nz

NZ WIDE

SUPPLY &

INSTALL

Freephone 0508 88 5656

Welcome to

SAFE ACCESSTotalsite Safe Access is all about keeping you safe when working off the ground. Permanently.

You’ll likely have some or all of the following situations –• You need to access the air con units on the roof• The Sky dish needs repairing• Gutters need cleaning

Rather than trying to figure out the best option to access these areas, give us a call. We will run you through the range of options available to you and advise what is best practice currently in NZ.

We look forward to your call.

Best regards,

The Safe Access team at Totalsite

NZ WIDE

SUPPLY &

INSTALL

Walkways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Condenser Mounts . . . . . . . . . . . . . . . . . . . . . . .2

Handrailing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Plant Platforms . . . . . . . . . . . . . . . . . . . . . . . . . . .4/5

Screen Walls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6/7

Permanent Anchors . . . . . . . . . . . . . . . . . . . . . . 8

Permanent Line Systems . . . . . . . . . . . . . . . . .9

Fixed Ladders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Totalsite Supplies is proud to to provide the leading solution

for all roof access requirements

www.totalsitesupplies.co.nz

1

The ProblemRegular foot traffic on roofs causes extensive dam-age to the roof sheeting. On low pitch roofs, dented roofing iron causes puddling, leading to rusting and leakage. In addition, the roofing material is a perfect trip hazard for tradesmen.

The SolutionInstall a Boardwalk Walkway system. This system is ideal because:• Safety – provides 40% better grip than alternative options• No leaks • No debris trap – being raised by 200mm from the roof profile, debris can pass freely underneath• Cost effective – compared to expensive repairs associated with regular roof traffic• Long lasting - all components are non-corrosive• Service – Supply and install service NZ wide• Compliant – In accordance with AS/NZS Industry specifications • Local – designed and manufactured in NZ• Long term peace of mind - 25 Year warranty

Options• Widths – Standard widths are 600mm, 750mm, 1200mm and 1500mm• Can be installed in any direction on most NZ roof profiles• Levelled walkways available for 7°+ roof pitches• Single-sided or double-sided handrails are optional

SpecificationsI-Beam Extrusion: 6061 - T6Nylon roof clamps: GV-3HPolyethylene Grate: HDPE GradeStainless steel fixings: 304 GradeTek screws: Stainless Steel(Materials used are non-corrosive)

InstallationPurlin spacing: 3600 mm maxBottom Support I-Beams: 2000 mm max

Dimension & WeightWalkway grate: 600mm x 750mmHeight above roof profile: 200mm Weight: 4 kg/m installed

Code ComplianceAll componentry has been specifically designed to comply with the following industry standards:• AS 1657:2013. Standards for fixed platforms, walkways, stairways and ladders.• AS/NZS 1170: B1: Structural design requirements with reference to performance & functionality.• AS/NZS 1170: B2: Durability codes and standards• NZ Metal Roof Code of Practice

Warranty - 25 Year Warranty

Boardwalk Walkways

NZ WIDE

SUPPLY &

INSTALL


2

Boardwalk Condenser Mounts

The ProblemThe traditional method of installing Condensers and other roof mounted units on timber blocks or steel rails is almost guaranteed to nullify the roofing ma-terial warranty. Expensive problems down the track include rusting the roofing iron, leaks, or even the unit eventually coming loose from its mountings.

The Solution: Use Totalsite Condenser Mounts which are ideal because of -• Leak prevention – using leak proof mounting brackets• No debris trap – being raised off the roof profile, debris can pass freely underneath• Cost effective – due to quick installation and modular design• Looks after the unit – holind it level and firm• Weight allocation – the weight of the units as distributed to the purlins• Quietness – minimising vibration noise• Long lasting - all components are non-corrosive• Compliant – In accordance with AS/NZS industry specifications • Local – designed and manufactured in NZ• Long term peace of mind - 25 Year warranty

Options• Multiple Sizes • Single/multiple unit width• Can be installed in any direction • Angle adjustment (levelled)

SpecificationsI-Beam Extrusion: 6061 - T6Nylon roof clamps: GV-3HStainless steel fixings: 304 GradeTek screws: Stainless Steel(Materials used are non-corrosive)

InstallationPurlin spacing: 600 mm maxBottom Support I-Beams: 2000 mm max

Load Bearing CapabilitiesLoading capacity of Boardwalk condenser mounts are determined by Purlin Spacing


Warranty - 25 Years


The ProblemWhen you have services on the roof (such as air con units) which are within 2m of the edge, you are required to install some form of fall protection. Also when tradesmen must work near clearlite roofing material, or access a ladder to the roof, they’re often within 2m of a significant fall distance.

The SolutionBoardwalk Handrailing is the ideal form of Fall Protection, because it prevents a fall, rather than saving you once you have fallen.

This system is ideal because-• Safety – no catch points (such as tex screws) on the handrails.• Lightweight – minimal extra weight on the roof compared with steel systems• Simple installation – lowering the time required to be on the roof• Modular – can be fitted to almost any situation with very little customisation• Cost effective• Long lasting - all components are non-corrosive• Service – Supply and install service NZ wide• Compliant – In accordance with AS/NZS industry specifications • Local – designed and manufactured in NZ• No need for annual recerts• Long term peace of mind - 25 Year warranty

Options• Single/double sided handrails• 2-3 handrails• Toeboards• Walkway mounted• Free standing, mounting on: Iron roofing/Membrane roofing/ Concrete tilt panel/Poly panel

SpecificationsI-Beam Extrusion 6061 - T6Aluminium Pipe 6061-T6Nylon Componentry GV-6HStainless steel fixings: 304 GradeTek screws: Stainless Steel(Materials used are non-corrosive)

Dimension & WeightHeight: 1100mm Top Rail: 50mm diameterMid Rails: 8mm diameterWeight: 3kg/m installed (excl. walkway)

InstallationMax purlin spacing: 3600 mmBottom Support I-Beams: 2000 mm apart

Code ComplianceAll componentry have been specifically designed to comply with the following industry standards:• AS 1657:2013. Standards for fixed platforms, walkways, stairways and ladders.• AS/NZS 1170: B1: Structural design requirements with reference to performance & functionality.• AS/NZS 1170: B2: Durability codes and standards

Warranty - 25 Years

3

Boardwalk Handrailing

NZ WIDE

SUPPLY &

INSTALL


4

Con-Form Plant Platforms - Series 1

The Problem:Traditional steel plant platforms are prone to leaks, and are time consuming to design, manufacture and install.

The Solution:Con-form Series 1 plant platforms are surface mounted, quick design and install and other benefits include-• Lightweight - 14kg/m2

• Less stress structure - distributes load across structure

• No leaks - surface mounted on the ribs• Cost effective• Long lasting - all materials are non corrosive• Service - supply and install service NZ wide• Compliant - in a accordance with AS/NZS Industry

specifications• Long term piece of mind - 25 year warranty

Options:• Sizes - any size possible from 1200 x 1200mm to

100mL (in 600mm increments)• Heights - Min 138mmH up to max 500mmH

SpecificationsLoad Ratings 2.5kPa, 5.0kPa and greaterHeight Min 138mmH up to Max 500mmHDimensions 200mm x 1200mm up to 100 x 12mLMaterials Aluminium X 3mm Sheet 304 Stainless Steel Fixings

Code Compliance• AS 1657:2013. Standards for fixed platforms, walkways, stairways and ladders.

Warranty - 25 Years

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

A A

B B

C C

D D

E E

F F

Con-form Group1300 882 49062 Corporation Ave Bathurst NSW [email protected]

Con-form GroupDesigned by Approved by Company

Sheet Size

© This Drawing is issued on the understanding that it is Copyright and is to beregarded as confidential property of Con-formGroup Pty Ltd. It must not be reproduced without the consent of Con-form Group.

Date

Series 1 Surface Mounted Platform System

Sign

Dimensions & Pitch

Scale

0.0.00mm x 0.0.00mm @ 0.0°

1 : 50

A2

138

1200 max

6000

6000

663

5.0 °

NZ WIDE

SUPPLY &

INSTALL


5

Con-Form Plant Platforms - Series 3

The Problem:Often a plant platform is required to be 1m+ above the roof surface to allow air flow, which increased the size and cost of the platform, and increases the stress on the sub structure.

The Solution:Con-form Series 2 plant platforms are surface mounted, allow for superior air flow and can be designed to fit any roof. Other benefits include-• Lightweight - 20kg/m2

• Less stress on structure - distributes load across structure

• Suits any roof - including high pitch and saw tooth roofs

• No leak - surface mounted on the ribs• Cost effective • Long lasting - all materials are non-corrosive• Service - supply and install service NZ

wide• Compliant - in accordance with AS/NZS

Industry specifications• Long term peace of mind - 25 Year WarrantyOptions:• Sizes - any size possible from 1200 x

1200mm to 100mL (in 600mm increments)• Heights - Min 1000mmH up to max

2510mmH

SpecificationsLoad Ratings 2.5kPa, 5.0kPa and greaterHeight Min 1000mmH up to Max 2510mmHDimensions 1200mm x 1200mm up to 100mLMaterials 3mm Sheet Aluminium 304 Stainless Steel Fixings


Warranty - 25 Years

NZ WIDE

SUPPLY &

INSTALL


6

The Problem:Unsightly condenser units and other machinery on the roof often detract from an otherwise well designed building.

The Solution:The ScreenWall integrates aesthetically with the sur-rounding architecture, and has the following benefits - • Lightweight - 7.5 kg/m2

• Suits any roof or plant platform• Cost effective• Long lasting - all materials are non-corrosive• Service - supply and install service NZ wide• Compliant - in accordance with AS/NZS Industry

specifications• Long term peace of mind - 25 Year Warranty

Options:• Heights - 1200, 1600, 2000 and 2400mmH• Colours - any coloursteel/powder coat colour• Can be mounted on an existing platform, or be free

standing on a roof

SpecificationsHeights 1200, 1600, 2000 and 2400mmHOpen Space 18.75%Wind Zones A, B and C, TC 2.5Materials Aluminium 304 Stainless Steel Fixings


Warranty - 25 Years

Con-Form ScreenWall

NZ WIDE

SUPPLY &

INSTALL


Con-Form PeaceMaker Screenwall

The Problem:The noises from roof top machinery are a major issue, with residents in the surrounding houses often complaining abour excessive noise.

The Solution:The PeaceMaker screen wall provides exceptional noise control through absorption, as well as being very pleasing to the eye. Other benefits include -• Lightweight - 7.25 kg/m2

• Suits any roof or plant platform• Cost effective• Long lasting - all materials are non-corrosive• Service - supply and install service NZ wide• Compliant - in accordance with AS/NZS Industry specifications• Long term peace of mind - 25 year warranty

PeaceMaker aluminium slats are backed with a sound absorbing polyethylene foam, that effectively traps noise within its cell structure.Sound absorption testing indicates a perfect Noise Reduction Coefficient (NRC) of 1.

Options:• Heights - 1200, 1600, 2000 and 2400mmH• Colours - any coloursteel/powder coat colour

SpecificationsHeights 1200, 1600, 2000 and 2400mmHOpen Space 18.75%Wind Zones A, B and C, TC 2.5Materials Aluminium 304 Stainless Steel Fixings


Warranty - 25 Years

7

NZ WIDE

SUPPLY &

INSTALL


Froglink Anchors

The ProblemIn many situations, handrailing doesn’t suit, and you need a simple anchor point near the work area. Permanent anchors have always been expensive and difficult to install, requiring roofing iron to be removed, extra framing installed etc.

The Solution: Install a Totalsite Froglink anchor, which is ideal for many roofs because:• No leaks – fixes to the ridge of the roofing profile• Full range – Provides anchorage for 360*• Fall arrest – rated to 15 kN• Suits all metal roof types• Quick installation – 60% faster than other similar anchors• Long lasting - all components are non-corrosive• Compliant – In accordance with AS/NZS industry specifications • Service – Supply and install service NZ wide• Long term peace of mind - 25 Year warranty

Specifications:• 316 Stainless steel construction• Multi directional fall protection• Single person anchor rated at 15kN• Designed to suit all roof profiles witha single row of holes

for the rivets• Install using 7x Gespia Bulbtite Rivets• Spacing must be no greater than the rafter length

Code ComplianceAll componentry has been specifically designed to comply with the following industry standards:• AS/NZS 1891.4 Industrial fall-arrest systems and devices Part 4• EN 795:2012, CEN/TS 16415:2013• AS/NZS 5532-2013 Manufacturing requirements for

single point anchor device used for harness-based work at height

Warranty - 25 Years

8

NZ WIDE

SUPPLY &

INSTALL


MULTI DIRECTIONAL

360°

FrogLine Permanent Line System

The ProblemIn many situations, handrailing doesn’t suit, and you need a simple anchor point near the work area. Permanent anchors have always been expensive and difficult to install, requiring roofing iron to be removed, extra framing installed etc.

The Solution: Install a Totalsite Froglink anchor, which is ideal for many roofs because:• No leaks – fixes to the ridge of the roofing profile• Full range – Provides anchorage for 360*• Fall arrest – rated to 15 kN• Suits all metal roof types• Long lasting - all components are non-corrosive• Compliant – In accordance with AS/NZS industry specifications • Service – Supply and install service NZ wide• Long term peace of mind - 25 Year warranty

Specifications:• 316 Stainless steel construction• Multi directional fall protection• Single person anchor rated at 15kN• Designed to suit all roof profiles witha single row of holes

for the rivets• Install using 7x Gespia Bulbtite Rivets• Suits pitches no greater than 25 degress on a multitude of

roof profiles.

Code ComplianceThe FrogLine has been rigorously tested and manufactured in accordance with AS/NZS 1891.2 & EN795:2012, CEN/TS 16415:2013

Warranty - 25 Years

9

NZ WIDE

SUPPLY &

INSTALL


Ultrasafe Fixed Ladders

10

The ProblemAccessing a roof from off a ladder makes for multiple issues. Stabilising the ladder while climbing it is difficult, and getting off the ladder safely at top is almost impossible.

The Solution: Installing an Ultrasafe fixed ladder provides tradesmen with the ideal method to access the roof safely. Available in standard sizes, they can also be customised to fit any situation. The Total-site Ultrasafe Fixed Ladder is ideal because:• Safety – high grip rungs• Bolt together design - swarf left on site• Long lasting - all components are non-corrosive• Lightweight• Customised• Low maintenance• Service – Supply and install service wide• Compliant – In accordance with AS/NZS industry specifications • Local – designed and manufactured in NZ• Long term peace of mind - 25 year warranty

Options• Standard width is 600mm, other options available.• Standard and Adjustable fixing brackets• Roof to ground, or roof to 2m from ground• Caged or non-caged• Safety gate hatch

SpecificationsExtrusions 6061-T6 AluminiumFixings 304 Stainless Steel


Warranty - 25 Years

NZ WIDE

SUPPLY &

INSTALL


Other Safe Access


Options Available


Safe Access Team:

Johnny 021 228 6133

Marcus021 280 2322

Hyrum022 159 2599

Jason021 228 3503

AUCKLANDCOMING SOON

CHRISTCHURCH72 Treffers Road WigramFreephone 0508 447 348

TIMARU35 Leckie StreetFreephone 0508 88 5656


safe access systems - totalsite supplies · • long term piece of mind - 25 year warranty options:...

Documents