roads and bridges research institute page (ibdim ... · roads and bridges research institute...
TRANSCRIPT
ROADS AND BRIDGES RESEARCH INSTITUTE
(IBDIM)
DEPARTMENT OF BRIDGES
TEAM FOR ANTI-CORROSION PROTECTION
OF BRIDGES
ul. Instytutowa 1, 03-302 Warsaw
IBDiM TEST ACCOUNT No TM-4/29/2017
TM-4
IBDiM
Page1
Pages3
DEPARTMENT:LABORATORY / TEAM:
Address:
Test venue:
Department of BridgesTeam for anti-corrosion protection of bridges TM-4
ul. Instytutowa 1, 03-302 WarsawPhone: +48 22 /39 00 268, Fax: +48 22/ 814 13 06
Laboratory of the TM-4 team for anti-corrosionprotection of bridgesRoom 20, Building: TM
ACCOUNT TITLE:
ORDERING PARTY:
ORDER NUMBER:
TEST SUBJECT:Samples obtained and delivered by:Samples received by:Samples received on:Samples tested on:
RESEARCH METHOD / PROCEDURE:
1. Determining the property of covering scratches according to PN-EN 1062-7-20052. Resistance to impact according to PN-EN ISO 6272:2011
TM-4 Team for anti-corrosion protection of bridges announces that the present test results refer exclusively to the test subject.The account shall only be copied as an entire document. Otherwise, it requires a written consent from the TM-4 team.
Determining the properties of KTX 07 anti-graffiticoating for covering scratches and its resistance toimpact.
PHSC Chemicals Sp.z o.o.ul. Droga Dębińska 2961-492 Poznań, Poland
email of 12 Oct 2017th
KTX 07 anti-graffiti coatingcourier serviceDamian Wojda20th Oct 201720th - 30th Oct 2017
Compiled by: Deputy Head of the teamauthorising the test
Deputy Head of Departmentof Bridges
Account compiled on 30th Oct 2017
ROADS AND BRIDGES RESEARCH INSTITUTE
(IBDIM)
DEPARTMENT OF BRIDGES
TEAM FOR ANTI-CORROSION PROTECTION
OF BRIDGES
ul. Instytutowa 1, 03-302 Warsaw
IBDiM TEST ACCOUNT No TM-4/29/2017
TM-4
IBDiM
Page2
Pages3
1. The grounds for performing the tests
The tests have been conducted on the grounds of the order issued by PHSC Chemicals Sp z o.o. on
12th Oct 2017 to determine the properties of KTX 07 system for covering scratches and its
resistance to impact.
2. Description of samples and conditions during the test
Samples were prepared according to the instructions in the technical data sheet. The tests were
conducted in the temperature of 23°C. A concrete substrate was covered with two layers of KTX 07
coating.
3. Measurements of the property for covering scratches.
The measurements were taken according to the PN-EN 1062-7:2005 standard in the temperature of
-10°C. Three measurements were performed for each sample. Table 1 compiles the results of
determining scratch covering property while table 2 presents scratch covering class according to the
guidelines of PN-EN 1062-7:2005, method A.
Table 1. Scratch covering – test results
Table 2. Scratch covering class according to PN-EN 1062-7:2005
SampleScratch covering property (µm.)
AverageMeasurement 1 Measurement 2 Measurement 3
1 286 285 290 287
2 245 265 298 269
3 276 284 274 278
Scratch covering – average value (µm) Class according to PN-EN 1062-7
1 287 A2
2 269 A2
3 278 A2
ROADS AND BRIDGES RESEARCH INSTITUTE
(IBDIM)
DEPARTMENT OF BRIDGES
TEAM FOR ANTI-CORROSION PROTECTION
OF BRIDGES
ul. Instytutowa 1, 03-302 Warsaw
IBDiM TEST ACCOUNT No TM-4/29/2017
TM-4
IBDiM
Page3
Pages3
4. Resistance to impact
The impact test was conducted according to the PN-EN ISO 6272-1:2011. A weight of 1 kg and 20
mm in diameter was applied. Resilience was tested by the weight being dropped onto the sample
surface from the height of 0.4 m. The test did not involve a dent depth control of the falling weight.
The measurements were taken on 30th Oct 2017. The results of the test are presented in table 3.
Table 3. Resistance to impact - test results
The End
No Coating thickness of 200± 40 (µm) Resistance to impact
1 Sample 1 Class I resilience > 4 Nm
2 Sample 2 Class I resilience > 4 Nm
3 Sample 3 Class I resilience > 4 Nm
