reverse lockout valve 55211-11k
TRANSCRIPT
![Page 1: Reverse Lockout Valve 55211-11K](https://reader036.vdocuments.us/reader036/viewer/2022082510/577d2fc91a28ab4e1eb2ac26/html5/thumbnails/1.jpg)
8/8/2019 Reverse Lockout Valve 55211-11K
http://slidepdf.com/reader/full/reverse-lockout-valve-55211-11k 1/1
Wear at the reverse lockout valve canallow TCC Signal and reverse oil tocross leak or leak to exhaust.
This kit includes a wear-resistant sleeve, modified valve and spring toestablish proper pressure, and prevent leakage of TCC signal or reverse oil at the worn bore.
Reverse
Lockout Kit
55211-11K
1 Reverse Lockout Valve1 Reverse Lockout Sleeve1 Reverse Lockout Spring
F-55211-TL
1 Reamer Jig1 Guide Pin1 Roughing Reamer1 Finish Reamer
Note: This tool kit is used for installing
both 55211-11K & 55211-01K.
Also available
55211-01K
AFL Valve & Sleeve Kit
Note: Use tool kit above F-55211-TL.
55211-04K
TCC Regulator Valveand Sleeve Kit
F-55211-TL4
Tool Kit for 55211-04K
COrrection
C ause
D i s t r i b u t o r
D a t a S h e e t 5L40-EPART NUMBER 55211-11K, F-55211-
©2008 Sonnax Industries, Inc. 55211-11K Rev:-, 55211-11K 11-18-08
800-843-2600 • 802-463-9722 • F: 802-463-4059 • www.sonnax.com • [email protected]
COMPLAINT Loss of reverse, TCC overheat, Burned reverse clutchSECONDARY COMPLAINTs • Burned low and reverse clutch • Transmission damage
Retaining Clip
R E Q U I R E
D
T OO L
R E Q U I R E
D
T OO L
R E Q U I R E
D
T OO L
R E Q U I R E
D
T OO L
R E Q U I R E
D
T OO L
R E Q U I R E
D
T OO L
Part Summary:
When in reverse gear, the reverse lockout valve directs reverse fluid into the reverse lockout flui(RLO) circuit to apply the reverse clutch and low/reverse clutch. Wear at the inboard spool borcan allow reverse fluid pressure to enter the TCC signal circuit and partially stroke the TCCregulator valve. This can result in TCC overheat and loss of reverse. The reverse lockout valve alsresponds to TCC signal fluid pressure to block fluid from entering the reverse lockout circuit, thupreventing the reverse clutch and low/reverse clutch from applying while the vehicle is movinforward. If there is excessive bore leakage, TCC signal can cross leak into the RLO circuit, anbegin to apply and burn the reverse clutches or cause transmission damage. This Sonnax sleevevalve and spring kit eliminates bore wear, and reestablishes the correct hydraulic pressures to preventhese problems.
Features & Benefits:
• Highly wear-resistant sleeve provides significantly more valve support to reduce leakage andprevent wear.
• Anodized aluminum valve resists wear to prevent leakage.
• F-55211-TL tool kit already available and also services the 55211-01K AFL Valve and Sleeve Kit
Guide Pin
Roughing Reamer
Finish Reamer
Reamer Jig
Reverse Lockout Valve
Reverse Lockout Sleeve
ReverseLockout Spring
Must holdminimum
18" vacuum
Rear Control Valve Body