request form custom magnetic pogo pin cable assemblyadam-tech.com/testnew/upload/files/adam...
TRANSCRIPT
Indicate the shape of the board connector and mating cable plug. Examples:
REQUEST FORM
Custom Magnetic Pogo Pin Cable Assembly
• Custom Magnetic Pogo Pin Cable Assemblies are designed on a case by case basis and specifically tailored to meet individual customer requirements.
• Non Recurring Engineering Charges will be a part of each and every project and will vary depending on complexity and design time. Minimum order quantities may be applied.
• All Magnetic Pogo Pin Cable Assemblies and Connectors are made on a custom basis and are Non-Cancellable Non-Returnable.
USB Termination P2: Customer’s Connector of
Choice
Blunt CutP1: Magnetic Connector
P1: Magnetic Connector
P1: Magnetic Connector
Square Shape
A magnetic pogo pin cable assembly has two ends. One end (we will call it P1) will be the magnetic connection side. Typically, the other end will have a connector termination (USB, or any other connector of choice). Indicate the type of termination you would like for P2. Examples:
Rectangle Shape Circular Shape Custom Keyed Shape
Wire To Wire Setup Wire To Board Setup
Male Pogo Pins on “Board Side” ConnectorMale Pogo Pins on “Cable Side” Female Landing Pads
A magnetic pogo pin cable assembly consists of “Male Pogo Pins” and “Female Landing Pads”. Indicate if you want the male pogo pins on the “Board Side Connector” or “Cable Assembly”. (Please disregard if your interest is a wire to wire setup.) Examples:
Indicate “Wire to Board” setup or a “Wire to Wire”. Examples:
Adam Tech • USA 909 Rahway Ave Union, NJ 07083 Tel: 908.687.5000 Fax: 908.687.5710Email: [email protected]
Adam Tech • TAIWAN5F-17, No.14, Lane 609, Sec. 5, Chongsin Rd. New Taipei City, Taiwan (R.O.C.) Tel: 886-2 2999 8028Fax: 886-2 2999 8062Email: [email protected] www.adam-tech.com
Adam Tech • CHINAFulai Road, Liuwa Lane Liaobu, Dongguan City,Guangdong Province, ChinaTel. 886-2 2999 8028Fax. 886-2 2999 8062Email: [email protected]
Straight Plug Right Angle PlugStraight Plug
If choosing a Wired to Board Setup, indicate the Board Connector Body Style, Termination, and Mounting Orientation. Examples:
Indicate Straight or Right Angle orientation for the magnetic plug side. Examples:
Snap In Panel Mount with Wire Termination
Bracket Mount with Panel Stops
Through Hole PCB Terminals
Panel Mount with Screw Holes
Adam Tech • USA 909 Rahway Ave Union, NJ 07083 Tel: 908.687.5000 Fax: 908.687.5710Email: [email protected]
Adam Tech • TAIWAN5F-17, No.14, Lane 609, Sec. 5, Chongsin Rd. New Taipei City, Taiwan (R.O.C.) Tel: 886-2 2999 8028Fax: 886-2 2999 8062Email: [email protected] www.adam-tech.com
Adam Tech • CHINAFulai Road, Liuwa Lane Liaobu, Dongguan City,Guangdong Province, ChinaTel. 886-2 2999 8028Fax. 886-2 2999 8062Email: [email protected]
Indicate the following:
• Wire Gauge and Cable Specs
• Cable Assembly Length
• Color • Pin Count
Please provide information:
NameTitle
CompanyAddress
Phone NumberEmail
Estimated Annual VolumeIndustry
ApplicationExpected Project Launch Date
Company Type (OEM, EMS, ODM)How did you hear about
Adam Tech and its capabilities?