repl profile

For everything in industrial fasteners

RUSHIPRABHA ENGINEERS PVT. LTD.

(an ISO 9001:2008 certified company)

S.NO.83/85, SHIVANE VILLAGE

TELE

Website :

E-mail :

ISO 9001:2008




S.NO.83/85, SHIVANE VILLAGE

OFF WARJE-NDA ROAD

Dangat –Patil Nagar,

PUNE – 411 023

TELEFAX : 020 - 65001252

ebsite : www.rushiprabha.com

mail : [email protected]

ISO 9001:2008




CONTENTS

� ABOUT US

� CONTACT DETAILS

� DNV CERTIFICATION

� CRISIL RATING CERTIFICATE

� OUR ORGANISATION CHART

� OUR MANUFACTURING FACILITIES

� OUR PRODUCT RANGE

� OUR ESTEEMED CUSTOMER LIST

� COMMERCIAL DETAILS OF OUR COMPANY

About Us

Rushiprabha Engineers Pvt. Ltd. (REPL) ranks above amongst the well-established and reputed

fastener manufacturers in and around Pune. Sales of the group exceed Rs.25 Crore, making the

group one of the Pune’s largest fastener and foundation bolt manufacturing company.

REPL, a major manufacturer in the fasteners industry, is a multi product market leader. REPL's

business interests include fasteners, foundation bolts, studs and other special engg. Items. Our

satisfied corporate customers reflect our specialization in MS as well as in the High Tensile

category. The factory is situated, at our own plot of 45000 sq. ft. having a built up shop floor area

of about 22000 sq. ft., at Shivane, and is about 20 km from Pune Railway Station. REPL has also

expanded its arm by venturing into cold forging facility in-house at their Khed Shivapur (near

Pune) factory.

REPL recognizes that motivated people make the difference - between growth and stagnation,

between success and failure. This has ensured that not a single person-hour has been lost due to

any kind of industrial action ever since inception in 1986. At REPL, quality, taken in its wider

sense, is far more than mere conformity to product specifications. It is a discipline, a way of life.

The company constantly strives to achieve excellence in all areas of performance.

This focus on quality has resulted in achieving ISO 9001: 2008 Certification from Det Norske

Veritas (DNV). REPL is today at the threshold of expanding its business. The major initiatives of

growth will be through strategic acquisitions, new advanced machinery set-up and

diversifications into new product areas. It is a vision that will position the company as a vibrant,

dynamic, and truly customer-oriented company.

Standard Fasteners

REPL manufactures Foundation bolts, standard Hex bolts, Head screws,Studs,Washers and nuts

conforming to BS, ISO, DIN, ANSI, SAE, BIS and JIS Standards. The standard fasteners range

includes hexagon head bolts, hexagon head screws, hexagon nuts, hexagon slotted / castle nuts

and weld nuts. Our bolts & nuts are manufactured from Carbon Steel, Alloy Steel, Austenitic

Steel and other Stainless Steel. The size range for hexagon head screws and bolts is M6 to M100

in metric standard and 1/4" to 4" in non-metric standard; all rolled threaded. Length range is

based on diameter and it covers 10 mm to 250 mm or 3/8" to 10" for bolts and screws. Hexagon

nuts are manufactured in diameters M6 to M100 or 1/4 " to 4” The product range also covers

rolled studs and tie-bars from diameter M6 to M100 or 1/4" to 4” up to a length of 10 meters.

Special Fasteners

REPL has over two decades of technical expertise in developing special (made to drawing)

fasteners for a wide range of applications. The special fasteners range includes Thread bolts,

studs, vis-à-vis all type of foundation bolts, and other engineering items as per customer

drawing. Continuous investments in new machinery, state-of-the-art set-up and advanced

manufacturing processes help in development of new range of special fasteners.

Socket Products

REPL also caters to the need of socket products. The socket products range includes socket head

cap screws, flat head screws, button head screws, shoulder screws, socket set screws and

hexagon socket keys.

The size range for socket head screws is M12 to M52 in metric standard and ½” to 2” in non-

metric standard. Length range is based on diameter and it covers 10 mm to 200 mm or 3/8" to 8".

Contact Details

NAME Mr. PRATAP KARVE.

DESIGNATION MANAGING DIRECTOR

MOBILE NO. 0 9373313213

NAME Mrs. RICHA KARVE-JOSHI.

DESIGNATION DIRECTOR

MOBILE NO. 0 88888842962

NAME Mr SANDEEP WAWDE

DESIGNATION Sr. Vice President and Marketing Executive

MOBILE NO. 0 9673700213

NAME Mr Prankur Datar

DESIGNATION Director

MOBILE NO.

NAME Mr .Pandurang Suryawanshi

DESIGNATION Commercial Manager

MOBILE NO.

DNV

CERTIFICATION

CRISIL

CERTIFICATION

OUR ORGANISATION

CHART

Our Manufacturing

Facilities

Manufacturing Facilities

An array of hot & cold forging machines supported by second operations machines such as

thread rolling (flat and cylindrical), drilling, grinding machines, and surface finish equipments

form part of the manufacturing facilities.

Hot Forging Facility

REPL has in house hot forging facility suitable for hot forging of Hex Head Bolts/Screws of size

M20 & above. We also hot forge special type of Bolts/Hex Allen Cap Screws & other round

head, square head type of bolts (in MS grade/High Tensile grade and SS 304/316/316L). Cold

and Hot Bending facility for big size J Type/Pin Type/L Type foundation bolts also done by

special dies.

Cold Forging Facility

REPL also possesses cold forging facility for cold forging of Hex Head Bolts/Screws of size M10

to M16 (in MS grade/High Tensile SA193 B7 Grade at their own Khed-shivapur (near Pune)

factory. We also cold forge special type of bolts/screws suitable for automobile industries at

large

Surface Finish

REPL currently offers a range of surface finish options such as gun barrel (as heat treated and

oiled), zinc phosphating, cadmium plating, zinc plating with white, yellow, green and black

passivation. We also offer super finishing operation like buffing & nitric acid cleaning treatment

for SS materials.

Heat Treatment Facilities

REPL also possesses heat treatment facility in close association with our sister concern M/s K. K.

INDUSTRIES; an ISO: 9001 company. We carry out Hardening & Tempering treatment in

Controlled Atmosphere by Forced Air Circulation method, with the help of Pit Type Gas

Carburising Furnace (4 Nos.) and Pit Type Tempering Furnace (4 Nos.). Quenching facility

comprises a Tube Type 3HP 4500 Ltrs tank. All Furnaces bear Modern Temperature Controllers

to monitor individual & continuous lots.

Apart from detailed above, other facilities include Carburising (up to 2mm case depth),

Carbonitriding (for shallow case depth), Normalizing, Solution Annealing and Surface Finishing

by shot blasting method.

Machinery Set Up

A list detailed machinery set up available at our works is on next page

Details of Machine Set Up in our works

• Lathe machine (Kirloskar / Anil make ) : 30 No.

• Centerless Grinding machine (BHAGWAN SONS) : 4 No.

• Rolling machine (Praga make : 512/513 ) : 10 No.

• Whirling Machine : 1 No.

• Bandsaw cutting machine : 6 No.

• Hacksaw machine : 2 No.

• Automatic Traub Machines : 8 No.

• Drilling machine : 6 No.

• Bradma Component Marking Machine : 2 No.

• Hardness Testing Machine. : 1 No.

• Polishing Machine : 5 No.

• Bench Grinder : 2 No.

• Hand Grinder : 8 No.

• Automatic CO2 Welding machine : 6 No.

• Welding Transformer : 2 No.

• Fly Press : 1 No.

• Job Cleaning Machine : 1 No.

• U Clamp Bending Machine : 2 No.

• Hydraulic Bending Machine : 3 No.

• Milling Machine : 1 No.

• Cold forging machine set. : 1 No.

• Upto 16 mm.

• Forging

• Trimming

• Flat rolling Facility

OUR PRODUCT

GALLERY

OUR PRODUCT

GALLERY

OUR PRODUCT

Our Products

Foundation Bolts

Using A572, GR. 50, IS-2062 Grade A, En

or as per the requirement of the customer.

i. Manufactured as per IS

ii. J Type / L Type Foundation Bolts

iii. Plate Type Foundation Bolts with 1 nut & 1 washer.

iv. Chimney Foundation Bolts.

v. Long length (up to 6000 mm) Rock Bolts in Torr

vi. Rail Track Foundation Bolts with 1 nut, 1 washer, 1 spring

vii. Other Foundation Bolts as per specific requirement & drawing.

ASTM A193, A194,

A490M / ASTM A 325M

Hardware This specification covers the B7, B8, B8M grade

& High Strength Steel Bolts Classes 10.9 and 12.9

for StREPLctural Steel Joints. These are also

called as High Friction Grip Bolts or StREPLctural

Bolts. Sizes range from M12 to M36.

Our Products

Foundation Bolts:

2062 Grade A, En-8, En-19 material as per IS-1367 Class 8.8 / Class 10.9

or as per the requirement of the customer.

Manufactured as per IS-5624, DIN 267, and DIN 529 with 2 nuts & washers Type A, B, C, D.

J Type / L Type Foundation Bolts with Class 8 nut, 1 washer and 1 lock nut.

Plate Type Foundation Bolts with 1 nut & 1 washer.

Chimney Foundation Bolts.

Long length (up to 6000 mm) Rock Bolts in Torr-Steel with 1 nut & 1 washer.

Rail Track Foundation Bolts with 1 nut, 1 washer, 1 spring washer.

Other Foundation Bolts as per specific requirement & drawing.

ASTM A193, A194,

A490M / ASTM A 325M

This specification covers the B7, B8, B8M grade

High Strength Steel Bolts Classes 10.9 and 12.9

for StREPLctural Steel Joints. These are also

called as High Friction Grip Bolts or StREPLctural

Bolts. Sizes range from M12 to M36.

Studs Bolts / Studs: Using IS-2062 Grade A, En-8, En-19, SS

or any other material as per the specification of the

customer. As per IS-1367 Class 5.6, Class 8.8, Class 10.9,

Class12.9, ASTM A193 B7, ASTM A193 B8, B8M, B16, ASTM

A563 L7, L7M. Surface Treatment: Blackodised,

Phosphated, Zinc Plated with yellow, blue, olive green

passivation. Threading sizes from M6 to M100 ISO Metric 6g

as per IS-4218 or equivalent in BSW / UNC, of following

types

i. Full Thread Studs as per DIN 975.

ii. Rods with Threading on one side as per DIN 524.

iii. Studs with Threading on two sides as per DIN 939,

940, IS 1862 Type A, B & C.

iv. Tip-Welding Studs.

v. Tie Rod Studs for Plate Type Heat Exchangers.

vi. Square / ACME Thread Studs (Lead Screws).

vii. Other Studs as per your specific requirement and

drawing.

1367 Class 8.8 / Class 10.9

5624, DIN 267, and DIN 529 with 2 nuts & washers Type A, B, C, D.

with Class 8 nut, 1 washer and 1 lock nut.

Steel with 1 nut & 1 washer.

19, SS-410, SS-304, SS-316

or any other material as per the specification of the

1367 Class 5.6, Class 8.8, Class 10.9,

Class12.9, ASTM A193 B7, ASTM A193 B8, B8M, B16, ASTM

A563 L7, L7M. Surface Treatment: Blackodised,

with yellow, blue, olive green

Threading sizes from M6 to M100 ISO Metric 6g

4218 or equivalent in BSW / UNC, of following

Rods with Threading on one side as per DIN 524.

on two sides as per DIN 939, DIN

Tie Rod Studs for Plate Type Heat Exchangers.

Square / ACME Thread Studs (Lead Screws).

Other Studs as per your specific requirement and

Hex Head Bolts: Using IS-2062 Grade A, En-8, En

316 or any other material as per customer

Specification. As per IS-1367 Class 5.6, Class 8.8, Class

10.9, ASTM A 193 B7, B8, B8M, A2

Surface Treatment: Blackodised, Phosphated, Zinc

Plated with yellow, blue, olive green passivation.

Threading Sizes M6 to M100 ISO, Metric 6g, as per IS

4218 or equivalent in BSW / UNC of following types,

i. Full Thread Hex Bolts.

ii. Half Thread Hex Bolts.

iii. Hex Bolts for Steel StREPLctures as per IS

iv. Special Hex Bolts as per DIN 561, DIN 933.

Other Hex Bolts as per your specific requirement and

drawing.

Allen Socket Set ScrewsUsing IS-2062 Grade A, En-8, En

316 or any other material as per your specification.

per IS-1367 Class 4.6, Class 5.6, Class 8.8, Class 10.9, A2

70, A4-80. Surface Treatment: Blackodised,


passivation. Threading Sizes M6 to M24 ISO, Metric 6g, as

per IS-4218 or equivalent in BSW / UNC of following

types,

i. Cup Point with Knurling as per IS

ii. Dog Point as per IS-6094

iii. Pointed as per IS-2064.

iv. Other GREPLb Screws as per customer’s

specifications.

: 8, En-19, SS-410, SS-304, SS-

316 or any other material as per customer

1367 Class 5.6, Class 8.8, Class

10.9, ASTM A 193 B7, B8, B8M, A2-70, A4-70, A4-80,

Surface Treatment: Blackodised, Phosphated, Zinc

Plated with yellow, blue, olive green passivation.

Threading Sizes M6 to M100 ISO, Metric 6g, as per IS-


Hex Bolts for Steel StREPLctures as per IS-6639.

Special Hex Bolts as per DIN 561, DIN 933.

Other Hex Bolts as per your specific requirement and

Allen Head / Socket Head

Bolts: Using IS-2062, Grade A, En-8, En-19,

316 or any other material specified by customer. As per

IS-1367 Class 5.6, Class 8.8, Class 10.9,

B8, B8M, A2-70,A4-70,A4-80.

Blackodised, Phosphated, Zinc Plated with yellow, blue,

olive green passivation. Threading Sizes M6 to M100 ISO,

Metric 6g, as per IS-4218 or equivalent in BSW / UNC of

following types,

i. Full / Half Thread Allen Bolts as per IS

ii. Other Allen Bolts as per customer’s requirement.

.

Allen Socket Set Screws: 8, En-19, SS-410, SS-304, SS-

316 or any other material as per your specification. As

1367 Class 4.6, Class 5.6, Class 8.8, Class 10.9, A2-

80. Surface Treatment: Blackodised,


ssivation. Threading Sizes M6 to M24 ISO, Metric 6g, as

4218 or equivalent in BSW / UNC of following

Cup Point with Knurling as per IS – 6094.

Other GREPLb Screws as per customer’s

Allen Head / Socket Head

19, SS-410, SS-304, SS-

or any other material specified by customer. As per

1367 Class 5.6, Class 8.8, Class 10.9, ASTM A 193 B7,

SurfaceTreatment:

Blackodised, Phosphated, Zinc Plated with yellow, blue,

n. Threading Sizes M6 to M100 ISO,

4218 or equivalent in BSW / UNC of

Full / Half Thread Allen Bolts as per IS-2269.

Other Allen Bolts as per customer’s requirement.

Eye Bolts / Lifting Eye BoltsUsing IS-2062 Grade A, En-8, En-

or any other material as per customer’s specification. As

per IS-1367 Class 4.6, Class 8.8, Class 10.9, A2

A4-80

Surface Treatment: Blackodised, Phosphated, Zinc Plated

with yellow, blue, olive green passivation. Threading Sizes

M12 to M64 ISO, Metric 6g, as per IS

BSW / UNC of following types,Manufacturing as per IS

/ DIN 580.

Counter Sunk Screws / Slotted / AllenUsing IS-2062 Grade A, En-8, En

specification. As per Class 4.6, Class 5.6, Class 8.8, Class 10.9, A2

Blackodised, Phosphated, Zinc Plated with yellow, blue, olive green passivation Threading Sizes M6 to

M64 ISO, Metric 6g, as per IS-4218 or equivalen

i. Dimensions as per ISO

U-Clamps: Using IS-2062 Grade A, En-8, En-19, SS

or any other material as per customer’s specification

IS-1367 Class 4.6, Class 8.8, Class 10.9, A2



M6 to M24 ISO, Metric 6g, as per IS

BSW / UNC of following types,

� Suitable for 15NB (1/2”) up to 800 NB

� Suitable for 12.5 (1/2”) up to 800 (12”) OD Pipes.

� Available in Rod Sizes 6mm to 16mm with 2 Nuts & 2

Washers.

� Available in Flat (Patti) for above sizes.

� Any other sizes as per customer’s drawing &

requirement.

Slotted GREPLb ScrewsUsing IS-2062 Grade A, En-8, En-19, SS-410, SS

other material as per your specification. As per IS1367 Class 4.6,

Class 5.6, Class 8.8, Class 10.9, A2-70, A4

Treatment: Blackodised, Phosphated, Zinc Plated with yellow,

blue, olive green passivation. Threading Sizes M6 to M64 ISO,

Metric 6g, as per IS-4218 or equivalent in BSW / UNC of following

types,

i. As per IS-2388 Type A (Flat End)

ii. Type B & C (Conical End)

iii. Type E (Cylindrical Dog Point)

iv. Type G (Taper Dog Point)

v. Type J (Cup Point)

vi. Type K (Oval Point)

Other GREPLb Screws as per your specific requirement and

drawing.

Eye Bolts / Lifting Eye Bolts: -19, SS-410, SS-304, SS-316

er material as per customer’s specification. As

1367 Class 4.6, Class 8.8, Class 10.9, A2-70, A4-70,



, as per IS-4218 or equivalent in

BSW / UNC of following types,Manufacturing as per IS-4190

Counter Sunk Screws / Slotted / Allen:

8, En-19, SS-410, SS-304, SS-316 or any other material as per customer’s

specification. As per Class 4.6, Class 5.6, Class 8.8, Class 10.9, A2-70, A4-70, A4-80. Surface Treatment:



Dimensions as per ISO-898/1.

19, SS-410, SS-304, SS-316

or any other material as per customer’s specification . As per

1367 Class 4.6, Class 8.8, Class 10.9, A2-70, A4-70, A4-80



M6 to M24 ISO, Metric 6g, as per IS-4218 or equivalent in

Suitable for 15NB (1/2”) up to 800 NB (12”) Pipes.

Suitable for 12.5 (1/2”) up to 800 (12”) OD Pipes.

Available in Rod Sizes 6mm to 16mm with 2 Nuts & 2

Available in Flat (Patti) for above sizes.

Any other sizes as per customer’s drawing &

Slotted GREPLb Screws: 410, SS-304, SS-316 or any

other material as per your specification. As per IS1367 Class 4.6,

70, A4-70, A4-80. Surface

Blackodised, Phosphated, Zinc Plated with yellow,

Threading Sizes M6 to M64 ISO,

4218 or equivalent in BSW / UNC of following

Other GREPLb Screws as per your specific requirement and

ther material as per customer’s

80. Surface Treatment:


t in BSW / UNC of following types,

J Clamps & L ClampsUsing IS-2062 Grade A material or in SS

any other material as per customer’s specification. As

per IS-1367 Class 4.6, Class 5.6, Class 8.8, Class 10.9, A2

70-, A4-70, A4-80.

Surface Treatment: Zinc Plated with Yellow, Blue, Olive

Green passivation.Threading sizes from M6 to M 24 ISO

Metric 6 g as per IS 4218 or equivalent in BSW / UNC of

following types.

i. Suitable for Angle Fitment (J Clamp) of GI / Asbestos

Cement CorREPLgated and non

With 1 sq. nut, 1 MS Washer & 1 Tar

ii. Suitable for pipe fitment (J Clamp) of GI / Asbestos

Cement CorREPLgated and non

With 1 sq. nut, 1 MS Washer & 1 Tar Washer.

iii. Suitable for channel fitment (L Clamp) of GI /

Asbestos Cement CorREPLgated and non

corREPLgated sheets. With 1 Sq. Nut, 1 MS Washer & 1

Tar Washer.

Any other size as per customer’s requirement.

Anchor Bolts: Using IS-2062 Grade A, material or in SS

304, SS-316 or any other material as per

customer’s specification. Surface Treatment:

Zinc Plated with Yellow, Blue, Olive

passivation.Threading sizes from M6 to

M30 with Nuts & Washers.

J Clamps & L Clamps: 2062 Grade A material or in SS-304, SS-316 or

any other material as per customer’s specification. As

1367 Class 4.6, Class 5.6, Class 8.8, Class 10.9, A2-

Surface Treatment: Zinc Plated with Yellow, Blue, Olive-

ivation.Threading sizes from M6 to M 24 ISO

Metric 6 g as per IS 4218 or equivalent in BSW / UNC of

Suitable for Angle Fitment (J Clamp) of GI / Asbestos

Cement CorREPLgated and non-corREPLgated sheets.


Suitable for pipe fitment (J Clamp) of GI / Asbestos

Cement CorREPLgated and non-corREPLgated sheets.


Suitable for channel fitment (L Clamp) of GI /

Asbestos Cement CorREPLgated and non-

sheets. With 1 Sq. Nut, 1 MS Washer & 1

Any other size as per customer’s requirement.

Nuts: Using IS-2062 Grade A, En


customer’s requirement. As per IS

Class 8, Class 10, A2-70, A4

2H/B8A Surface Treatment: Blackodised,

Phosphated, Zinc Plated with yellow, blue, olive

green passivation.

Threading Sizes M6 to M100 ISO, Metric 6g, as

per IS-4218 or equivalent i

following types,

i. Standard Nuts as per IS

6623.

ii. Lock Nuts

iii. Nylock Nuts

iv. Heavy Nuts

v. Long / Double Nuts

vi. Castle Nuts as per IS-2232

vii. Round Nuts

viii. Any other nut as per customer’s drawing &

requirement

2062 Grade A, material or in SS-

316 or any other material as per

customer’s specification. Surface Treatment:

Zinc Plated with Yellow, Blue, Olive-Green

passivation.Threading sizes from M6 to

M30 with Nuts & Washers.

2062 Grade A, En-8, En-19, SS-410, SS-


As per IS-1367 Class 4,

70, A4-70, A4-80, SA194 Gr

2H/B8A Surface Treatment: Blackodised,

Phosphated, Zinc Plated with yellow, blue, olive


4218 or equivalent in BSW / UNC of

Standard Nuts as per IS-1364, ISO 4032, IS

2232

Any other nut as per customer’s drawing &

Washers: Using IS-2016 Grade A, En-8, En


customer’s requirement.

Surface Treatment: Blackodised, Phosphated,

Zinc Plated with yellow, blue, olive green

passivation.


per IS-4218 or equivalent in BSW / UNC of

following types,

i. As per IS-2016 Type A Punched Washers for

Hex Bolts & Screws.

ii. As per IS 2016 Type B Punched Washers for

Round & Cheese Head Screws.

iii. Any other Washers as per customer’s

requirement.

Machined Components: We manufacture machined components, spare parts & special fasteners as per customer’s requirement.

We also undertake Job Working as per customer’s requirement.

Readymade Hardware We are also stockiest and supply hardware of reputed brands such as LPS, PFL, TVS etc with proper

surface treatment and ensure gauge fitment after surface treatment as per customer’s requirement &

drawing.

Quality Assurance

We have quality control inspection for incoming material, process contro

trained engineer. We are also endeavoring to set up quality systems for achieving ISO certification.

8, En-19, SS-410, SS-


Surface Treatment: Blackodised, Phosphated,

Zinc Plated with yellow, blue, olive green


equivalent in BSW / UNC of

2016 Type A Punched Washers for

As per IS 2016 Type B Punched Washers for

Round & Cheese Head Screws.

Any other Washers as per customer’s

Machined Components:

We manufacture machined components, spare parts & special fasteners as per customer’s requirement.

We also undertake Job Working as per customer’s requirement.

Readymade Hardware:

We are also stockiest and supply hardware of reputed brands such as LPS, PFL, TVS etc with proper


Quality Assurance:

inspection for incoming material, process control & delivery managed by

engineer. We are also endeavoring to set up quality systems for achieving ISO certification.

We manufacture machined components, spare parts & special fasteners as per customer’s requirement.

We are also stockiest and supply hardware of reputed brands such as LPS, PFL, TVS etc with proper


l & delivery managed by

engineer. We are also endeavoring to set up quality systems for achieving ISO certification.

OUR ESTEEMED

CUSTOMER LIST

OUR ESTEEMED

CUSTOMER LIST

OUR ESTEEMED

CUSTOMER LIST

OUR ESTEEMED CUSTOMERS

� THERMAX INDIA LTD.

� ALFA LAVAL INDIA LTD.

� RELIANCE PETROLIUM LTD.

� RELIANCE INDUSTRIES LTD.

� RELIANCE ENGINEERING ASSOCIATION LTD.

� GODREJ & BOYCE MFG CO.LTD

� ZAMIL STEEL BUILDINGS INDIA PVT. LTD

� PRAJ INDUSTRIES LTD.

� TATA BLUE SCOPE LTD.

� CRANE PROCESS FLOW TECHNOLOIES.

� THYSSEN-KREPLPP INDUSTRIES INDIA PVT. LTD.

� BGR ENERGY SYSTEM LIMITED.

� FINOLEX CABLES LTD.

� KIRLOSKAR POWER EQUPIMENTS LTD.

� KRONHE MARSHALL PVT LTD.

� ADOR WELDING LTD.

� UNIVERSAL CONSTREPLCTION LTD.

� LARSEN & TOUBRO LTD., DIV: CEMENT, PAWAI

� MATHER & PLATT PUMPS LTD.

� KUMAR MOTORS

� TATA AUTOMATION LTD.

COMMERCIAL

DETAILS

COMMERCIAL

DETAILS

COMMERCIAL

Registration & Commercial Details

Name of the company: RUSHIPRABHA ENGINEERS PVT. LTD.

Regd. Office & Works Address: S. No.83/85, Shivane Village, Off Warje-

NDA Road, Behind Dangat Patil Eastate,

Shivane Pune-411023(MAHARASHTRA )

TeleFax No.: 020-65001252

E-mail: [email protected]

[email protected]

Website:

www.rushiprabha.com

Maharashtra TIN No.:

27600132702V wef 01/04/2006

Central TIN No.:

27600132702C wef 01/04/2006

MSME Permanent Registration No.: 270251103260

PAN No.: AACCR9232Q

IEC NO : 3108018311

Service Tax No. : AACCR9232QST002

Bank Name : Bank of India – Uttam Nagar Branch

Bank A/c no. : 061330100003018

IFSC CODE : BKID0000613

Excise Details:

Range: Kothrud Range – I Division: Pune VI

ICE House, Opp. Wadia College

Sasoon Road, Pune

ICE House, Opp. Wadia College Sasoon

Road, Pune

Commissionerate: Pune III PLA No.: 05/7/2005

C.E Registration:

AACCR9232QEM002 Location Code No.: 710102

Tariff Heading No.: 73181500 ECC No.: 7105040968

Rate of Duty: 12.50%

Assuring you our best services at all times, we remain.

Yours faithfully,

For Rushiprabha Engineers Pvt. Ltd.,

Mr. Pratap Karve

Managing Director

repl profile

Documents