renault store - technical specifications tour of vehicle area...100 18 30 30 112 100 30 285 100 18...

Renault Store - Technical specifications

Tour of vehicle area

© Renault Brand Stores - July 2015


2Renault Store / Technical specifications for Tour of vehicle area / General

Contents

General

Introduction 4

Colours & materials 5

Technical principles

General presentation 7

Wall markings 8

Suspended markings 14

Adaptations

Technical specifications 32

General



Introduction

Clearly defined by floor markings, the Tour of vehicle area is a standardised zone in the workshop on which the customer’s vehicle is parked.This is the space in which the Service advisor, accompanied by the customer, carries out the tour of the vehicle and establishes the nature of the work to be done.The area must be covered, spacious and well lit so that the tour of the vehicle can be performed easily and the vehicle inspected with precision.The Tour of vehicle area must be directly accessible from the After-Sales Reception, whether this is integral with or separate from the showroom.This area comprises several components which are combined according to the available surface area:- The grey wall or suspended panel- The communications message- The floor markings



RAL 9010 white

White adhesive

Pantone 7408 C yellow

Yellow adhesive

Pantone grey 432C(RAL7024)- MDF panel

(suspended markings)- Wall paint

(wall markings)- Floor

Colours & materials

Technical principles


7

1

2

Renault Store / Technical specifications for Tour of vehicle area / Technical principles

PrincipleDepending on the configuration and the space available in the workshop, two systems for identifying the Tour of vehicle area are available:

1 A wall marking system

2 A suspended marking system

The constant elements of the area are:

- The floor painting

- The floor markings

- The vertical markings on a wall or a suspended panel

The space must always be well lit.

General presentation

NOTE:The 3D images shown are provided for illustration purposes and to simulate layout principles.


8

12

3


DescriptionThe vehicle reception area offers various options depending on the available surface area, location and number of vehicles.The area comprises the following components: floor painting and markings, adhesive message (on wall).The area must be well lit.

Key1 Floor painting2 Floor markings

If the floor is already dark grey, only use floor markings

3 Wall markings

Wall markings

INCOMING VEHICLES

INCOMING VEHICLES

TO SHOWROOM

TO SHOWROOM

VERSION SIDE-ON TO WALL

VERSION FACING THE WALL


9

212

70180

250

2

1


DescriptionIf the vehicle reception area is located near a wall, the wall should be painted so it can feature the vertical markings.

The grey wall paint should cover the entire wall (full height and width).

The area to paint can be reduced if necessary where other components already present so require.

The communications message shall be at least 0.5 m away from the edge of the painted wall.

Accent lighting on the message is recommended.

Wall markingsZone parallel to wall - Standard format

paint full width

pain

t ful

l hei

ght


10

50 min

250

180

70

2

1


Wall markingsZone parallel to wall - Minimum format

DescriptionThe area to paint can be reduced if necessary where other components already present so require.

A minimum of 3 x 6 m must be complied with.



min

imum

pai

ntin

g 30

0


11

212

70180

250

2

1


Wall markingsZone parallel to wall - Minimum format

DescriptionIf the vehicle reception area is located near a wall, the wall should be painted so it can feature the vertical markings.

The grey wall paint should cover the entire wall (full height and width).

The area to paint can be reduced if necessary where other components already present so require.



paint full width

pain

t ful

l hei

ght


12

50 min 50 min212

250

18070

1

2


Wall markingsZone facing wall - Minimum format

DescriptionThe area to paint can be reduced if necessary where other components already present so require.

A minimum of 3 x 3.12 m must be complied with.



minimum painting 312

minim

um painting 300


13

1849221

221

100138

138700

98

170

34211

267

69

175


DescriptionFond : Couleur : Gris Pantone 432 U (C31 M8 J0 N81)

Typeface“Leave your car[...],we will take good“Font: Renault Life LightPoint size: 550 ptsColour: White“here“ Font: Renault Life BoldPoint size: 550 ptsColour: White“care of it!“Font: Renault Life BoldPoint size: 985 ptsColour: Pantone yellow 7408C.(C0 M32 J100 N0)

NOTE: the message shall be translated and adapted by each country.

Wall markingsOutline


14

2

3

1


DescriptionThe vehicle reception area offers various options depending on the available surface area, location and number of vehicles.The area comprises the following components:floor painting and markings, double-sided adhesive message (on suspended panel positioned in front of vehicle).The area must be well lit.

Key1 Floor painting2 Floor markings

If the floor is already dark grey, only use floor markings.

3 Suspended markings

NOTE:The 3D images displayed are provided for illustration purposes and to simulate layout principles.

Suspended markings

HANGING PANEL VERSION

INCOMING VEHICLES

TO SHOWROOM


15

50240

150

150

50240


PrincipleThis option is suitable when no refurbishable walls are available in the vicinity of the vehicle reception area.

A double-sided panel is then hung from the ceiling to replace the communications message on the wall.

The panel is positioned at the front of the vehicle in the single or multiple space zone.

Dimensions of the hanging panel: 150 x 50 cm.


Suspended markings

SINGLE SPACE VERSION

MULTIPLE SPACE VERSION


16

1849221

221

100138

138700

98

170

34211

267

69

175


Suspended markingsOutline

Description Fond : Couleur : Gris Pantone 432 U (C31 M8 J0 N81)

Typographie“Leave your car[...],we will take good“Font: Renault Life LightPoint size: 550 ptsColour: White“here“ Font: Renault Life BoldPoint size: 550 ptsColour: White“care of it!“Font: Renault Life BoldPoint size: 985 ptsColour: Pantone yellow 7408C.(C0 M32 J100 N0)



17

600

100 18 30

30112

100

10028530

18 18

30100

400

18


DescriptionFloor markings must be placed on Pantone 432C grey paint.The vehicle must be centred on the painted zone on the floor.If the floor is already dark grey, only use floor markings.

TypefaceFloor markings must be placed on Pantone 432C grey paint.The vehicle must be centred on the painted zone on the floor.If the floor is already dark grey, only use floor mar-kings.


Floor markingsOutline

Adaptations


19

400 120 min

600

Renault Store / Technical specifications for Tour of vehicle area / Adaptations

DescriptionIf the area is close to a wall and a pathway passes between the wall and the area, this pedestrian pathway must be at least 120 cm wide.

1 Vehicle Parallel - option 1With a passage between the wall and the area

grey wall = 600 m

inimum


20

460

370 90

600


DescriptionIf the area is close to a wall and no pathway is planned or set out, the grey floor paint must be extended to the wall.

1 Vehicle Parallel - option 2Area against a wall

grey wall = 600 m

inimum


21

120 min840

100 (min 60)

600



2 Vehicles Side-by-Side - option 1With a passage between the wall and the area

grey wall = 600 m

inimum


22

90810

100 (min 60)

600



2 Vehicles Side-by-Side - option 2Area against a wall

grey wall = 600 m

inimum


23

400

120

min

1200



2 Vehicles one behind the other - option 1With a passage between the wall and the area

mur gris = 1200 minimum


24

370

90

1200



2 Vehicles one behind the other - option 2Area against the wall

grey wall = 1200 minimum


25

120 min720

760

160160



2 Vehicles in Offset layout - option 1With a passage between the wall and the area

grey wall = 600 m

inimum


26

90690

760

160160



2 Vehicles in Offset layout - option 2Area against the wall

grey wall = 600 m

inimum


27

707120 m

in

1160

45°



2 Vehicles in 45° Diagonal layoutgrey w

all = 600 minim

um


28

600

1280

100 (min 60) 100 (min 60)

120 min



3 Vehicles Parallel - option 1With a passage between the wall and the area

grey wall = 600 m

inimum


29

600

1250

100 (min 60) 100 (min 60)

90



3 Vehicles Parallel - option 2Area against the wall

grey wall = 600 m

inimum


30

840

100

(min

60)

120

1200



4 Vehicles Parallel - Option 1With a passage between the wall and the area grey wall = 1200 minimum


31

810

100

(min

60)

90

1200



4 Vehicles Parallel - Option 2Area against a wall

grey wall = 1200 minimum


32Renault Store / Technical specifications for Tour of vehicle area / Technical principles

Technical specifications

Prerequisites:- The area must be directly accessible from the

Showroom

Standard rules:- At least 1 location per Service Advisor, adjacent

to the customer reception area- Dimensions of 4x6 m, covered, lit- The «vehicle protection» display module must be

present in this area

Bonus features:- 1 Lift to carry out additional checks - 1 Shock absorber test bench

Reuirement detailsThe purpose of the descriptive information provided below is to define the various aesthetic and technical parameters to be taken into account by the supplier in the design and implementation of the structures.This technical analysis is necessary due to the numerous requirements relating to raw materials, manufacturing methodology, as well as logistics and fitting.DISCLAIMER: requirements are specified for

information purposes only, the production of the structures remains the responsibility of suppliers.The communications messageThis component indicates the area to the driver and invites them to park.Depending on the layout of the site, this communications message shall be stuck to a painted wall or a panel hung over the area.

The floor markingsThe area will be marked out by floor paint and floor markings.These markings are required to:- Set out a spot for the customer’s vehicle (yellow

setsquare markings)- Welcome customers («Welcome» message) - Invite customers to do a tour of the vehicle with

the service advisor (message: «Tour of vehicle area»).

Compliance of visuals and coloursAll shades have a satin finish with 40% gloss. Particular attention should be paid to complying with the colour code. Colour and material samples shall be provided for approval before production launch. The rendering of each of the shades in day and night-time conditions shall be assessed, in

particular when used on two different materials.

Production principleVisuals must comply with the official images of these technical requirement specifications (CCTP). The supplier must submit production drawings for approval, accompanied by all descriptions of sub-assemblies integrated into the components. Based on the main principles defined in these specifications, the supplier is expected to provide recommendations regarding the choice of materials and the means implemented to comply with the dimensions and aesthetic aspects defined in this document.

VariantsThe supplier is required to provide a definition of components as described in the drawings document.Nevertheless, the submission of low-cost variants is desired and expected.When the supplier deems it appropriate, they may submit variants to RENAULT to the procedures or methods described in the definition document, as long as these variants correspond to the aesthetic requirements set out and can be used homogeneously on various families of components


33Renault Store / Technical specifications for Tour of vehicle area / Technical principles

to ensure in particular a comparable ageing of colours, along with the expected guarantees.By way of example, any reshaping of component surfaces, different ways of connecting the sub-assemblies, or changes in materials, decoration or painting procedures, must be reported.

Protection of goods and personsIn particular, the supplier is responsible for the calculation, sizing and operational implementation of structural components, such that they offer good resistance over time, and that the safety of the public who come into direct contact with these components is not placed at risk (in particular for free-standing components).

Technical studyThe supplier shall analyze this definition file, draft a technical summary and produce a folder of production drawings to submit to RENAULT for approval. The samples of materials and colours shall be attached to this folder. A specific schedule for the project shall be established, identifying the passage and validation points expected by Renault.

First batch production

Following validation of the production folder, the supplier shall proceed with industrial launch, in particular for tools used for implementation. The first batch for each component shall be assembled by the supplier for presentation to Renault and validation where appropriate.

Mass productionFollowing first-batch validation and the potential communication of desired changes, the supplier will receive agreement for the launch of the series production of the components. The supplier shall then produce the components in full compliance with the production folder submitted and the accepted pre-production components.

WarrantyA one-year warranty against any production and installation defects is requested.

Technical specifications

renault store - technical specifications tour of vehicle area...100 18 30 30 112 100 30 285 100 18...

Documents