removing mold by removing humidity
DESCRIPTION
Every extreme temperature is only amplified by the amount of humidity in the air. Natives of Arizona do not know hot until they have been to the Bahamas during the dry season.TRANSCRIPT
Removing Mold by Removing Humidity
Every extreme temperature is only amplified by the amount of humidity in the air. Natives of Arizona do
not know hot until they have been to the Bahamas during the dry season.
Humidity makes temperatures more extreme
One hundred and ten dry degrees can be a
relief from ninety-seven wet ones. One
hundred percent humidity becomes stifling in
these situations, making it harder to believe
and harder to stay dry.
On the flip side, the coldest nights in the
Sahara pale in comparison to bone chilling
cold of Wisconsin in the winter time. Living
near a lake strengthens the bite of negative
twenty degree weather by making every
single nerve ending feel the intense cold.
Humidity penetrates through even the thickest coats, leaving you exposed to the worst at extremely low
temperatures. It is more bone chilling than the scariest ghost story you have ever heard.
Humans have learned to adapt to these extreme temperatures. In fact, a large portion of them actually
seek these environments out, calling them home for generations.
We’ve built technologies to help us survive in these difficult circumstances. We have also created
ingenious ways of fighting off humidity, so mold removal in Indianapolis becomes unnecessary.
Clean up water
Here are a few things you can do to keep your home dry. The easiest thing to do is to clean up all visible
water.
Any water left out will automatically add humidity to your air. In the summer months the speed at which
it the water enters the air increases drastically, so the sooner you clean it up, the better.
Make sure your pipes are clean as well. Your pipes will
often clog up with some of the nastiest things.
In the sink’s pipes you can find left over potato peels
that catch and gather water. Shower drains often
gather gross hair and soap scum that keep water from
draining properly.
These are the worst kinds of humidifiers because you
often have no idea they are there. They start growing
mildew.
Next thing you know you’re working on mold removal
in Indianapolis and can’t figure out where it’s coming
from. Clean out your pipes regularly to keep this travesty from occurring.
Turn on the fan while showering. This is an easy way to dehumidify your house.
You often bath in a relatively small room for the amount hot water you use. When you leave the shower
on for fifteen minutes and not let it have a way to escape, it only builds up and seeps into all the cracks,
getting everything wet.
When you do this on a daily basis, the water doesn’t have time to air out. The moisture keeps building
up until you have a lot of mold.
Mold removal in Indianapolis is always more difficult when you let thrive for a while. Just turn on the fan
for every shower and then leave it on after you leave to air out.
Doing this for 20 minutes a day can really help improve the dehumidification of your home. Mold
removal in Indianapolis is a lot harder than mold prevention.
Photo credit: B.Monginoux, Jenny Dawning