QwikSEER+

WattSaverWattSaverWattSaverQwikSEER+

WattSaverWattSaverWattSaver™

™

MKTG000130 / 202200304_2-1-2013

Solutions Through Advanced Technology™, Qwik™, QwikSEER+ WattSaver™, and QwikProducts™ are trademarks. of Mainstream Engineering Corporation, 200 Yellow Place, Rockledge, FL 32955

1-800-866-3550 / 321-213-3550

For more product information, please visit

www.Qwik.com/QwikSEER/or your local distributor Solutions Through Advanced Technology™

©2012 Mainstream Engineering Corporation

Scan with your SmartPhone for Info...

U.S. Patents Pending

The Affordable Solutionto Enhancing A/C orHeat PumpSystems

MADE IN THE USA

Hum

idit

y Re

mov

al

I n c re a s e d H u m i d i t y R e m ova l R ate *

82°F 97°F 112°F% Faster Humidity Removal with QwikSEER+ WattSaver™

Up to

566%Faster

HumidityRemoval

withQwikSeer+

WattSaver™

157%Faster

52%Faster

Increase Humidity Removal Rate up to 566%Indoor air quality (IAQ) is a vital factor in maintaining a healthy life. By reducing the humidity in a home, mold growth is avoided. According to the EPA (http://www.epa.gov/mold/preventionandcontrol.html), to prevent mold relative humidity should be maintained below 60%.QwikSEER+ WattSaver™ has been shown to improve humidity removal rates by up to 566%. This increased moisture removal can significantly improve indoor comfort while also inhibiting the formation of mold, thus improving IAQ.By connecting the optional humidity sensor (QT6001), the QwikSEER+ control board will also optimize the system for fastest humidity removal during high-humidity situations.

Additional Features of QwikSEER+ WattSaver™

` Added Blower Motor Protection QwikSEER+ WattSaver’s™ patented design incorporates high-voltage electrical protection for voltage spikes.

` 1 Year Limited WarrantyContact Mainstream Engineering Corporation for details.

*Based on Independent Laboratory Testing at Intertek (Plano, Texas) of a 14 SEER system. For complete test results, go to www.qwik.com.

4

SIMPLE INSTALLATIONDisconnect 2 Wires from Blower Motor

Connect 2 Wires from Control Board/Relayto QwikSEER+™ Board

AConnect 4 Wires between QwikSEER+™ Board and Blower Motor

B CConnect 2 Wires from Control Board/Relayto QwikSEER+™ Board

1MOUNT BRACKETTO CABINET

A

B

2THERMISTOR TO A-COIL

FUSE: 250VAC, 20ATIME DELAY

OUTPUTS TO BLOWER MOTOR

LINEINPUT(FROM CONTROLBOARD OR RELAY)90-240VAC50-60Hz16A MAX

5VD

C Si

de90

-240

VAC

Side

COOLL2

COML1

P7 P4 P3 P8

K3

K2

K1

GREENto Ground

BLWR LOWL2 - LOW

BLWR MEDL2 - MED

BLWR HIGHL2 - HIGH

From Control Board or Relay

Cool Mode (Motor Speed Tap)

From Control Board or Relay Cool Mode(Common Wire)

BLWRL1/COM

REDto BlowerLow Speed Tap

Thermistor

BLUEto BlowerMed Speed Tap

BLACKto BlowerHigh Speed Tap

PURPLEto Blower Common

BRAC

KET

SIDE

QT6001Humidity Sensor (if equipped)

QwikSEER+ WattSaver™P/N QT6000MADE IN THE USAPATENTS PENDING

CONNECT WIRESSEE SIMPLIFIED WIRING DIAGRAM

3ATTACH PCB TO BRACKET

For PSC (Permanent-Split Capacitor) Motors Only 90VAC-240VAC / 1Phase - 16 amp maximum

*Read Complete Instruction Manual Before Installing!

7-13%*EER IMPROVEMENT.7-13%

*EER IMPROVEMENT.

EER

Impr

ovem

ent (

%)

97°F

1 4 S E E R U N I T T E S TE n e rg y E� c i e n c y R at i o I m p rove m e nt

82°FOutdoor Temperature

SEER14 Furnace with A/CSEER14 A/C

14

0

2

4

6

8

10

12 12.9

10.9 10.5

7.4

MAINSTREAM ENGINEERING CORPORATION200 Yellow Place • Rockledge, Florida 32955

321-631-3550

Compatible with A/C or heat pump systems

that either use PSC blower motors or can be fitted with PSC motors.

*Based on Independent Laboratory Testing at Intertek (Plano, Texas) of a 14 SEER systems. For complete test results, go to www.qwik.com.

QwikSEER+ WattSaver™ Specifications

Input Voltage Range 90 - 240VAC

Maximum Steady-State Current 16 Amps

Maximum Blower Hp ¾ Hp

Frequency 50 - 60 Hz

Fuse Rating 20 Amps Time Delay

Surge Suppression 6,000 Amps, 100 Joules

Size / Dimensions 4.3” x 5.3”

Supported Accessories QT6001 QwikSEER+ Humidity Sensor™

QwikSEER+

WattSaverWattSaverWattSaver `Automatic Operation

`Proven Performance

`Simple Installation

™

A Qwik Performance Upgrade to New or Existing Systems.What does this all mean…?QwikSEER+™ can save save homeowners as much as 7-13%* annually on their air conditioning operating costs. Finally, you can provide a low-cost alternative to expensive deluxe systems. Although deluxe systems can provide these savings and possibly more, they can cost thousands more than a standard system.

Here’s how it works…QwikSEER+™ is an innovative and cost-effective electronic control that operatesin the cooling mode of an existing airconditioner or heat pump. By using the existing speeds taps of a PSC motor, the QwikSEER+ control board selects the best possible airflow based on conditions in the home. This enhances system performance while providing energy savings and improved humidity removal.

Fast InstallationBecause of the QwikSEER+’s™ exclusive “plug & play” design, you won’t need to change any of the system controls or the current thermostats. QwikSEER+™ handles everything automatically and is compatible with your existing system.

The choice is simple...Now you can offer your homeowners an affordable solution that will lower the energy costs of their existing systems (by about 10%) and increase the rate of humidity removal.

*Independent Laboratory Testing at Intertek (Plano, Texas) following ANSI/ASHRAE 37 test protocol and using a residential 14 SEER air handler and condensing unit (80°F indoor, 97°F outdoor temperatures) resulted in an EER improvement of 7.4%. Using the same condensing unit and temperature conditions with a residential furnace unit resulted in an EER improvement of 10.5%. On cooler days, (82°F outdoor temperature), the EER improve-ments for air conditioning and furnace units increased to 10.9% and 12.9%, respectively. For complete test results, go to www.qwik.com.