rebar - grupo acerero · nmx-b-506-canacero–2011 and usa standard astm-a615m and astm-a706m....
TRANSCRIPT
REBARMEXICAN STANDARD NMX–B-506
Nominal Dimensions
Tensile Requirements
Bar Designation
No.
Tensile Strength, min, psi (kg/cm2)
Yield Strength, min, psi (kg/cm2)
Elongation 8in (200 mm), min, %
3, 4, 5 y 6
7, 8
10 y 12
90000 psi (6,300 kg/cm2)
60000 psi (4,200 kg/cm2)
9
8
7
Bend Teste Requirements
Bar Designation
No.Grade 60 (42)
3, 4, 5
6, 7, 8
10
12
The rebar manufactured by GRUPO ACERERO meets the highest quality, attached to Mexican standard NMX-B-506-CANACERO–2011 and USA standard ASTM-A615M and ASTM-A706M.
Special rod orders to di�erent chemical and physical characteristics (weldability, ductility, diameter and length, among others) based on our markets’ requirements are also manufactured.
For all the steel grades, quality certificate ensuring compliance according to the relevant standard, is issued.
3
4
5
6
8
10
12
Bar Designation No. SizeDiameter
0.375
0.500
0.625
0.750
1.000
1.270
1.500
9.5
12.7
15.9
19.0
25.4
31.8
38.1
0.11
0.20
0.31
0.44
0.79
1.27
1.76
71
127
198
285
507
794
1140
0.376
0.668
1.043
1.502
2.670
4.303
6.464
3/8”
1/2”
5/8”
3/4”
1”
1” 1/4
1” 1/2
0.560
0.994
1.552
2.235
3.973
6.225
8.938
mmin
Cross-Sectional Area
in2 mm2
Nominal Weight Nominal Mass
lb/ft kg/m
G A S A 8 N 4 2
Point of origin Standard NMX-B-506
GradeDesignation No.Marking
GASA Point of origin
3, 4, 5, 6, 8, 10, 12 Designation No.
Type of steel(Standard NMX-B-506-CANACERO-2011)
Yield Strength, min, kg/cm2
N
42
Packaging specifications coil rebar
Diameter(mm) Weight lbs (kg) Internal Diameter External Diameter LengthBar Designation No.
2
3
4
5
7.9
9.5
12.7
15.9
3,174 lbs (1,440 kg)
5,291 lbs (2,400 kg)
3´ to 3´2”
(0.91 m to 0.97 m)
3´9” to 4´
(1.14 m to 1.22 m)4.82 ft - 5.90 ft
(1.47 m - 1.80 m)
These products earn the following LEED® credits thanks to regional, recycled material content
• Prerequisite MRp: Construction and demolition waste management planning.
LEED® v4 • Credit M12: Construction Waste Management.• Building Product disclosure: - Material ingredients - Sourcing of raw materials
• MCr2: Construction Waste Management.• MRc4: Recycled Content.• MRc5: Reegional Materials.
Packaging specifications straight and bent rebar
NOTE: Cut to order based on customer needs (special lengths). Various corrugation types according to end consumer needs available.
Presentation Length Rods/ Package Packages/Bundle Rods/ Bundle Rods per ton (depending on length)
Bent
Straight
Straight
Bent
Straight
Straight
Straight
Straight
Straight
Straight
Straight
15 a 25
15 a 25
200
149 a 154
149 a 154
196 a 202
10 a 15
10 a 15
110
86 a 86
86 a 86
110 a 113
53 53 a 5537 37 a 38
21 21
13 13
Diameter (inches)
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
5/8”3/4”
1”
1” 1/4
1” 1/2
12.0 m
12.0 m
9.15m
12.0 m
12.0 m
9.15m
12.0 m
12.0 m
12.0 m
12.0 m
12.0 m 9
15 a 25
15 a 25
214 a 21
14 a 21
2
22
2
2
2
375
375
400
210
210
220
106
74
42
26
18 9
WIRE ROD
These products earn the following LEED® credits thanks to regional, recycled material content
• Prerequisite MRp:Construction and demolition waste management planning.
LEED® v4 • Credit M12: Construction Waste Management.• Building Product disclosure: - Material ingredients - Sourcing of raw materials
• MCr2: Construction Waste Management.• MRc4: Recycled Content.• MRc5: Reegional Materials.
Coil Specifications
a) Industrial wire rod (T) b) Construction wire rod (C)
Carbon steel wire it is used to manufacture other wires with finishes and specific uses within a particular industrial process.Uses: Wire drawing thinner wires, component finished products.The ability to manufacture special wire rod have: chemical composition with or without treatment, presentation, diameter, etc.
It is produced in diameters from 0.219 in to 0.866 in (5.5 mm to 22 mm), in three di�erent carbon contents: low, medium and high. According to customer requirements
Carbon steel wire used in the construction industry to form figures of reinforcing steel (stirrups and ties).
NMX-B-365
Weight lbs (kg) Internal Diameter External Diameter Length
3,150 lbs to 5,159 lbs
(1,430 kg to 2,340 kg)
Presentation
3´ to 3´2”
0.91 m to 0.97 m
3´9” to 4´
1.14 m to 1.22 m
3´11” to 6´4”
1.19 m to 1.93 m1.4t to 2.4t
• Prerequisite MRp: Construction and demolition waste management planning.
LEED® v4 • Credit M12: Construction Waste Management.• Building Product disclosure: - Material ingredients - Sourcing of raw materials
• MCr2: Construction Waste Management.• MRc4: Recycled Content.• MRc5: Reegional Materials.
Specifications
REINFORCING WELDED MESH
These products earn the following LEED® credits thanks to regional, recycled material content
The reinforcing mesh is a welded mesh formed with steel rods arranged perpendicularly and joined by a process of electrical resistance welding. It is used as reinforcement of concrete floors, walls and slabs, and other special applications such as concrete pipes, canals and roads among others.
2.50 m x 6.0 m sheet
2.50 m x 40.0 m roll
6x6 10/10
6x6 8/8
6x6 6/6
6x6 4/4
Sizes Presentation
NMX-B-290, NMX-B-253, NMX-B-072
NOTE: Di�erent sizes can be manufactured, based on customer needs.
Specifications
PREFABRICATED REINFORCING WELDED ELEMENT ARMACERO
Is a reinforcement consisting of longitudinal and transverse wires welded together through resistance. Often it used as steel reinforcement in beams and columns.
It is supplied in sheets to wholesalers, who assemble the columns and distribute them through sub-wholesalers and retailers.
These products earn the following LEED® credits thanks to regional, recycled material content
• Prerequisite MRp:Construction and demolition waste management planning.
LEED® v4 • Credit M12: Construction Waste Management.• Building Product disclosure: - Material ingredients - Sourcing of raw materials
• MCr2: Construction Waste Management.• MRc4: Recycled Content.• MRc5: Reegional Materials.
NMX-B-456
10x10-3
12x12-3
15x15-3
12x 12-4
15x 15-4
12x 20-4
15x 20-4
15x 25-4
15x 30-4
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
DesingIN 2R
Type
3R
5.72 mm
7.25 mm
7.94 mm
IN
2R
3R
3.60 mm
4.88 mm
4.88 mm
DiameterType
longitudinal G-60 transversal G-50
Specifications
PREFABRICATED LATTICE RIB ARMAGASA
Electrically armor in a product, used to manufacture semi-prefabricated concrete beams, consisting of three longitudinal rebars forming a triangular section, the lower are welded to the upper lattice stirrups smooth wire.
10-36
10-64
12-36
12-99
19.68, 22.97 and 29.52 ft
(6.0, 7.0 and 9.0m) sections
Availability to make other lengths
Size Presentation
14-36
14-64
14-99
• Prerequisite MRp: Construction and demolition waste management planning.
LEED® v4 • Credit M12: Construction Waste Management.• Building Product disclosure: - Material ingredients - Sourcing of raw materials
• MCr2: Construction Waste Management.• MRc4: Recycled Content.• MRc5: Reegional Materials.
These products earn the following LEED® credits thanks to regional, recycled material content
NMX-B-455
Specifications
ANNEALED WIRE
The characteristic of our annealed wire is its ductility, making them optimal for moorings in work and in various industrial processes
These products earn the following LEED® credits thanks to regional, recycled material content
• Prerequisite MRp:Construction and demolition waste management planning.
LEED® v4 • Credit M12: Construction Waste Management.• Building Product disclosure: - Material ingredients - Sourcing of raw materials
• MCr2: Construction Waste Management.• MRc4: Recycled Content.• MRc5: Reegional Materials.
Size Presentation
110 lbs to 661 lbs coil 10 to 18 gauge
( 0.135 in to .048 in)
NMX-B-072
2”
2 ½”
3 ½”
4”
55.12 lbs (25 kg) box
Size Presentation
Specifications
NAIL
Nail standard steel for construction. It is manufactured in measures 2 to 4 inches and is generally used for assembling wooden falsework.
• Prerequisite MRp: Construction and demolition waste management planning.
LEED® v4 • Credit M12: Construction Waste Management.• Building Product disclosure: - Material ingredients - Sourcing of raw materials
• MCr2: Construction Waste Management.• MRc4: Recycled Content.• MRc5: Reegional Materials.
These products earn the following LEED® credits thanks to regional, recycled material content
NMX-B-505
5/32”
3/16”
¼”
5/16”
60
Size Grade Presentation
Specifications
COLD ROLLED REBAR MS-60
The Cold-Drawn Rebar MS-60 is highly resistant to stress, by its manufacturing process of cold rolling.
With this rebar you save up to 30% of the steel used in construction; compared to traditional hot rolled rebar.
Length 20´and 40´
Availability to make other lengths 6.5 ft to 40 ft
These products earn the following LEED® credits thanks to regional, recycled material content
• Prerequisite MRp:Construction and demolition waste management planning.
LEED® v4 • Credit M12: Construction Waste Management.• Building Product disclosure: - Material ingredients - Sourcing of raw materials
• MCr2: Construction Waste Management.• MRc4: Recycled Content.• MRc5: Reegional Materials.
NMX-B-072
STIRRUP
The stirrup are steel wire rods bent into a di�erent shapes, which are placed perpendicular to the longitudinal reinforcement. They serve to position bars in the assembly of reinforcing elements. They are responsible to resist shear forces and diagonal tension that may a�ect an item.
Specifications
• Prerequisite MRp: Construction and demolition waste management planning.
LEED® v4 • Credit M12: Construction Waste Management.• Building Product disclosure: - Material ingredients - Sourcing of raw materials
• MCr2: Construction Waste Management.• MRc4: Recycled Content.• MRc5: Reegional Materials.
These products earn the following LEED® credits thanks to regional, recycled material content
NMX-B-072
6.35 mm
Size Type of wire rod Presentation in packages of 100 pz. (kg)
13.4
15.5
18
20.4
15×15
15×20
15×25
15×30
STEEL ROUND BAR
Grupo Acerero commercial steel round bars are manufactured with the highest quality standards (ASTM-A-706, ASTM-A-36).
Additionally, special product orders, are manufactured with di�erent physical and chemical characteristics as required.
The Round Bar Product is a hot Rolled Carbon Steel Produced Commercial Quality.
Nominal Dimensions
Cross-Sectional Area Nominal WeightDiameterSize
in mm
Bar Designation
No. in2 mm2 lb/ft Kg/m
3
4
5
6
8
10
12
3/8”
1/2”
5/8”
3/4”
1”
1” 1/4
1” 1/2
Presentation
0.375
0.500
0.625
0.750
1.000
1.270
1.500
9.5
12.7
15.9
19.1
25.4
32.3
38.1
0.11
0.20
0.31
0.44
0.79
1.27
1.76
71
129
199
284
510
819
1140
0.376
0.668
1.043
1.502
2.670
4.303
6.464
0.560
0.994
1.552
2.235
3.973
6.404
8.938
20 ft or 45 ft- 3in, Bundle whit 1, 2 or 4 ton.
These products earn the following LEED® credits thanks to regional, recycled material content
• Prerequisite MRp: Construction and demolition waste management planning.
LEED® v4 • Credit M12: Construction Waste Management.• Building Product disclosure: - Material ingredients - Sourcing of raw materials
• MCr2: Construction Waste Management.• MRc4: Recycled Content.• MRc5: Reegional Materials.
ASTM-A-706, ASTM-A-36
NOTE: Cut to lenght based on customer needs (special lengths).