readmission form - i. k. gujral punjab technical...

18
Page 1 of 5 Readmission Form (For students enrolled in 2015 and later) I K Gujral Punjab Technical University Distance Education Program (January-2017 Session) Form No……………… (To be allotted by university) Important Instructions 1. Readmission will be made only within the state of Punjab & UT Chandigarh. 2. Student must read the Prospectus (issued in his admission session) carefully before filling this Form. 3. The student must ensure that he is eligible for the readmission to next semester as per maximum permissible duration of the course. The detailed eligibility criteria is given in the Prospectus and also attached at Annexure-I of this Form. 4. Academic Calendar is uploaded at university website. student must follow the schedule/dates of: Readmission, Personal Contact Program, assignments submission, practical exams & viva etc. as notified in Academic Calendar. 5. Student must enter his correct mobile no, email id and postal address carefully as the same will be used by IKGPTU for future correspondence with him. 6. Fee can be submitted in shape of Demand Draft drawn in favour of Registrar IKGPTU and payable at Jalandhar. Kindly attach the fee DD in original with this form. Write your Roll No, Course, Semester, mobile number & email id on backside of the DD. For students visiting IKGPTU campus at Kapurthala fee can also be paid through PoS using Credit/Debit Card/Digital Wallets etc. 7. Applicable fee can be seen from Fee Chart available at university website and also attached at Annexure-II of this form. 8. Keep a photocopy of completely filled Readmission Form and the fee DD with you for future reference. 9. The completely filled and signed Readmission Form along with fee DD shall reach the university on or before the respective last dates, either in person or through Registered/Speed Post only (Don’t send through Courier) at following address: Director DDE 3 rd Floor, IK Gujral Punjab Technical University Jalandhar Kapurthala Highway Kapurthala 144603 10. Helpline for any Readmission related Enquiry: 01822-662502, 9478098108, [email protected] Section 1 Student Details Roll No Category (Gen/SC/ST/OBC/Other) Paste your recent passport size photo here First Name Last Name Father’s Name Mother’s Name Course Semester Gender Male Female Employment Status (Yes/No)

Upload: others

Post on 21-Jul-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Readmission Form - I. K. Gujral Punjab Technical Universitydde.ptu.ac.in/images/announce/Readmission-Form-after-2015.pdf · Education & Industrial Training, Chandigarh or such Examination

Page 1 of 5

Readmission Form (For students enrolled in 2015 and later)

I K Gujral Punjab Technical University Distance Education Program

(January-2017 Session) Form No……………… (To be allotted by university)

Important Instructions

1. Readmission will be made only within the state of Punjab & UT Chandigarh.

2. Student must read the Prospectus (issued in his admission session) carefully before filling this

Form.

3. The student must ensure that he is eligible for the readmission to next semester as per

maximum permissible duration of the course. The detailed eligibility criteria is given in the

Prospectus and also attached at Annexure-I of this Form.

4. Academic Calendar is uploaded at university website. student must follow the schedule/dates

of: Readmission, Personal Contact Program, assignments submission, practical exams & viva

etc. as notified in Academic Calendar.

5. Student must enter his correct mobile no, email id and postal address carefully as the same

will be used by IKGPTU for future correspondence with him.

6. Fee can be submitted in shape of Demand Draft drawn in favour of Registrar IKGPTU and

payable at Jalandhar. Kindly attach the fee DD in original with this form. Write your Roll No,

Course, Semester, mobile number & email id on backside of the DD. For students visiting

IKGPTU campus at Kapurthala fee can also be paid through PoS using Credit/Debit

Card/Digital Wallets etc.

7. Applicable fee can be seen from Fee Chart available at university website and also attached at

Annexure-II of this form.

8. Keep a photocopy of completely filled Readmission Form and the fee DD with you for future

reference.

9. The completely filled and signed Readmission Form along with fee DD shall reach the

university on or before the respective last dates, either in person or through

Registered/Speed Post only (Don’t send through Courier) at following address:

Director DDE

3rd Floor, IK Gujral Punjab Technical University

Jalandhar Kapurthala Highway

Kapurthala 144603

10. Helpline for any Readmission related Enquiry: 01822-662502, 9478098108, [email protected]

Section 1 – Student Details

Roll No Category (Gen/SC/ST/OBC/Other)

Paste your recent passport

size photo

here

First Name Last Name

Father’s

Name Mother’s Name

Course Semester

Gender Male Female Employment Status

(Yes/No)

Page 2: Readmission Form - I. K. Gujral Punjab Technical Universitydde.ptu.ac.in/images/announce/Readmission-Form-after-2015.pdf · Education & Industrial Training, Chandigarh or such Examination

Page 2 of 5

Contact Detail

Student’s Mobile no.

Student’s E-mail ID

(Write in capital letters)

Alternate

Mobile/Landline no.

Aadhar Card No

Section 2- Specialization Subjects

(Only for MCA 3rd sem, MBA 3rd sem, MBA 4th sem & M.Com 3rd sem)

1. Student must opt for specialization subjects as per list given in the Prospectus and fill the applicable

Specialization Form attached at Annexure-III.

2. The filled Specialization Form has to be attached with this Readmission Form.

3. Specialization subjects are applicable only for above mentioned courses. For rest of the courses,

students need not fill any Specialization Form.

4. Students must keep a copy of the completely filled Specialization Form also for future reference.

5. Specialization subjects once selected in the Specialization Form shall be deemed as final and any

request for changing the same at a later stage will not be entertained.

Section 3- Personal Contact Program (PCP)

1. University organizes PCP classes only at its own campuses.

2. PCPs will be held in Regular Mode (continuous two week classes at IKGPTU Main Campus

Kapurthala only as well as Weekend Mode (classes on Saturdays & Sundays at other

campuses of IKGPTU)

3. Student can attend the classes including practicals at the respective PCP location as opted in

his Readmission Form.

4. Conduct of Internal & External Practical Examinations/Viva-voce will be held after the PCP

as per schedule notified in the Academic Calendar at the respective PCP locations only. If the

student fails to appear in Internal & External Practical Examinations/Viva-voce, he will be

marked absent in the concerned paper and will earn reappear for the same.

5. The PCP location once selected in Readmission Form will not be changed later for the current

semester.

6. The selected PCP location is applicable for this admission session only.

7. If the student does not fill any choice of PCP location, university will allot any location as it

deems fit. No claim will be entertained later.

Complete Address

House no.

VPO/Mohalla/

Ward/Street

Village/City

Tehsil

District

PINCODE State/UT

Page 3: Readmission Form - I. K. Gujral Punjab Technical Universitydde.ptu.ac.in/images/announce/Readmission-Form-after-2015.pdf · Education & Industrial Training, Chandigarh or such Examination

Page 3 of 5

Select your PCP Location

Tick only one (√)

1. IKGPTU Kapurthala Campus (Regular Mode Only)

2. IKGPTU Mohali Campus (Weekend Mode)

3. IKGPTU Hoshiarpur Campus (Weekend Mode)

4. IKGPTU Amritsar Campus (Weekend Mode)

Section 4- Examination Centre for semester end theory examinations

1. University conducts the semester end theory examinations at various examination centres

across the state of Punjab. A list of probable examination centre locations is attached at

Annexure-IV.

2. Student must opt for three examination centre locations in order of preference out of the

given list.

3. Although student’s preference will be taken care of, still university reserves the right to

allot a different examination centre if the administrative expediency will so warrant.

4. If the student does not fill any choice of exam centre, university will allot any location as

it deems fit. No claim will be entertained later.

5. University will issue Admit Card to the eligible students for appearing in the semester end

examinations. The allotted examination centre will be reflected on the Admit Card. This

Admit Card will be available online at university website before the commencement of

semester end examinations.

6. No student will be entertained at examination centre without Admit Card.

Preference Write your Examination Centre Location

1

2

3

Section 5- Fee Details

1. Fee can be submitted in shape of Demand Draft drawn in favour of Registrar IKGPTU and

payable at Jalandhar. Kindly attach the fee DD in original with this form. Write your name, course

applied, semester, mobile number & email id on backside of the DD. For Students visiting IKGPTU

campus at Kapurthala fee can also be paid through PoS using Credit/Debit Card/Digital Wallets etc 2. Applicable fee can be seen from Fee Chart available at university website and also attached at

Annexure-II of this form. 3. For SC/ST/other students applying under Post Matric Scholarship scheme, no fee will be charged and

such students will only submit completely filled Admission Form.

4. Keep a photocopy of completely filled Admission Form and the fee DD with you for future

reference.

Page 4: Readmission Form - I. K. Gujral Punjab Technical Universitydde.ptu.ac.in/images/announce/Readmission-Form-after-2015.pdf · Education & Industrial Training, Chandigarh or such Examination

Page 4 of 5

Select your Fee Type

Tick only

one (√)

1. General (Full Fee)

2. SC/ST/ others under Post Matric Scholarship (No Fee)

3. Defence Personnel/Ex-servicemen & their wards

(25% concession only on Tuition Fee)

4. IKGPTU Employee (No Tuition Fee) & their wards (50%

concession on tuition fee)

5. Handicapped (Concession on tuition fee as per %age of

Disability)

Demand Draft Details

DD No Date Bank Branch Location Amount

Write your Roll No, name, course applied, semester, mobile number & email id on backside of the DD.

Keep a photocopy of completely filled Admission Form and the fee DD with you for future

reference.

Section 7- Declaration by Student

I hereby declare that the information furnished by me in this Readmission Form is true to the best of

my knowledge & belief. University may correspond with me through the aforesaid contact details

given by me.

I have read eligibility conditions of university as mentioned in applicable Prospectus.

I declare that I am eligible to take readmission in this course. At any later stage if it is found that I am

not eligible for this course or the information furnished by me is proved wrong/misleading, my

admission may be cancelled & decision of the University shall be final.

I further declare that I shall not pursue two degree programs simultaneously and shall adhere to the

UGC/DEC policy on pursuing two or more programs simultaneously.

Signatures of Student Date Place

*****

Page 5: Readmission Form - I. K. Gujral Punjab Technical Universitydde.ptu.ac.in/images/announce/Readmission-Form-after-2015.pdf · Education & Industrial Training, Chandigarh or such Examination

Page 5 of 5

Deposit Receipt for submitting the Readmission Form

Details to be filled by Student/Depositor

Roll No

Name of Student

Course

Semester

Email ID of Student

Mobile No of Student

Demand Draft Details

DD No Date Bank Branch Location Amount

Mode of submitting the Readmission Form: (Please Tick)

1. By Hand/In person

2. By Speed Post

Name of the Depositor………………………Signatures…………………………Mob. No……………………

For official use only

Received the Readmission Form and original fee Demand Draft as per above given details.

Name of Receiving Official Signatures Allotted Form No Date of Receipt

Note: For Readmission Forms submitted through Speed Post, the scan copy of Deposit Receipt will be

sent at student’s email address as given in the Readmission Form.

*****

Page 6: Readmission Form - I. K. Gujral Punjab Technical Universitydde.ptu.ac.in/images/announce/Readmission-Form-after-2015.pdf · Education & Industrial Training, Chandigarh or such Examination

Page 1 of 3

Annexure-I

Eligibility Criteria for different courses of Distance Education Program of IKGPTU

(Admission Session: January-2017)

Course Duration Max Duration Eligibility

BCA 3 years 6 years

All those candidates who have passed the 10+2 or its

equivalent examination in any stream conducted by a

recognized Board / University / Council.

OR

Those candidates who have passed their Matriculation

examination AND have also passed three year Diploma

in any Trade from Punjab State Board of Technical

Education & Industrial Training, Chandigarh or such

Examination from any other recognized State Board of

Technical Education, or Sant Longowal Institute of

Engineering & Technology, Longowal.

BCA

(Lateral

Entry

Admission

in 3rd

semester)

2 years 4 years

3 Year Polytechnic Diploma in IT/CSE (or equivalent)

Or

10+2 with one year Diploma in Computer

Application/IT (or equivalent) from a recognized

university with Mathematics as course at 10+2 or

DIT/DCA level.

BSC- IT 3 years 6 years

All those candidates who have passed the 10+2 or its

equivalent examination in any stream conducted by a

recognized Board / University / Council.

OR

Those candidates who have passed their Matriculation

examination AND have also passed three year Diploma

in any Trade from Punjab State Board of Technical

Education & Industrial Training, Chandigarh or such

Examination from any other recognized State Board of

Technical Education, or Sant Longowal Institute of

Engineering & Technology, Longowal.

BSC-IT

(Lateral

Entry

Admission

in 3rd

semester)

2 years 4 years

3 Year Polytechnic Diploma in IT/CSE (or equivalent)

Or

10+2 with one year Diploma in Computer

Application/IT (or equivalent) from a recognized

university with Mathematics as course at 10+2 or

DIT/DCA level.

MCA 3 years 6 years

All those candidates who have passed any recognized

Bachelor’s degree of minimum three years duration with

Mathematics/ Statistics /Business Mathematics /

Business Statistics / Quantitative Techniques as

Compulsory/ Optional/ Additional Paper as one of the

subjects either at 10+2 or at graduation level.

Or

Have passed BCA course of minimum three years

duration from any recognized University.

Page 7: Readmission Form - I. K. Gujral Punjab Technical Universitydde.ptu.ac.in/images/announce/Readmission-Form-after-2015.pdf · Education & Industrial Training, Chandigarh or such Examination

Page 2 of 3

Course Duration Max Duration Eligibility

MCA

(Lateral

Entry

Admission

in 3rd

semester)

2 years 4 years

All those candidates who have passed any recognized

Bachelor’s degree of minimum three years duration in

BCA, B.Sc. (IT/Computer Science) with Mathematics

as a course at 10+2 level or at Graduation level.

Obtained at least 50% (45% in case of candidates

belonging to reserved category) at the qualifying

examination.

MSC-IT 2 years 4 years

All those candidates who have passed any recognized

bachelor’s degree of minimum three years duration with

Mathematics / Statistics / Business Mathematics /

Business Statistics / Quantitative Techniques /

Computer Science/ Information Technology as

compulsory / Optional / additional paper as one of the

subjects either at 10+2 or at graduation level. OR

PGDCA / BCA / B.Sc.(IT)

PGDCA 1 year 2 years Graduation in any discipline.

BBA 3 years 6 years

All those candidates who have passed the 10+2 or its

equivalent examination in any stream conducted by a

recognized Board / University / Council.

OR

Those candidates who have passed their Matriculation

examination AND have also passed three year Diploma

in any Trade from Punjab State Board of Technical

Education & Industrial Training, Chandigarh or such

Examination from any other recognized State Board of

Technical Education, or Sant Longowal Institute of

Engineering & Technology, Longowal.

BCOM 3 years 6 years

Having passed at least +2 examination of Punjab School

Education Board or any other examination recognized

as equivalent thereto with at least:33% marks in the

aggregate in case of commerce students who have

passed 10+2 examination and 40% for the students who

have opted for two of the following commerce subjects

in 10+2 a. Accountancy b. Business Studies c.

Economics d. Mathematics e. Office Management and

Secretarial Practice. f. Principle and Practice of

Insurance. g. Tax Procedure and Practice. and 45% for

other candidates

MBA

Only

Readmission 2 years 4 years

1.All those candidates who have any recognised

Bachelor’s degree of minimum 3 years duration in any

discipline.

2.Candidate has to qualify MBA Entrance Test DEMET

conducted by IKGPTU or should have qualified any

national level MBA Entrance Test.

Page 8: Readmission Form - I. K. Gujral Punjab Technical Universitydde.ptu.ac.in/images/announce/Readmission-Form-after-2015.pdf · Education & Industrial Training, Chandigarh or such Examination

Page 3 of 3

Course Duration Max Duration Eligibility

MCOM

Only

Readmission 2 years 4 years

Graduation Degree in Commerce/Business

Administration from any recognized university.

BA-JMC 3 years 6 years 10+2 in any stream or equivalent

MA-JMC 2 years 4 years Graduation in any stream or Equivalent

*****

Page 9: Readmission Form - I. K. Gujral Punjab Technical Universitydde.ptu.ac.in/images/announce/Readmission-Form-after-2015.pdf · Education & Industrial Training, Chandigarh or such Examination

Annexure-II Fee Chart of courses under Distance Education Program of IKGPTU

(January-2017)

Course Semester Admission Fee Exam Fee Total Fee

BCA

1 9000 700 9700

2 9000 700 9700

3 9000 700 9700

4 9000 700 9700

5 9000 700 9700

6 9000 700 9700

BCA-LE

3 9500 700 10200

4 9500 700 10200

5 9500 700 10200

6 9500 700 10200

BSC-IT

1 7500 700 8200

2 7500 700 8200

3 9500 700 10200

4 9500 700 10200

5 9500 700 10200

6 9500 700 10200

BSC-IT-LE

3 10000 700 10700

4 10000 700 10700

5 10000 700 10700

6 10000 700 10700

MCA

1 10000 700 10700

2 10000 700 10700

3 10000 700 10700

4 10000 700 10700

5 10000 700 10700

6 10000 700 10700

MCA-LE

3 10500 700 11200

4 10500 700 11200

5 10500 700 11200

6 10500 700 11200

MSC-IT

1 8000 700 8700

2 8000 700 8700

3 9000 700 9700

4 9000 700 9700

Page 10: Readmission Form - I. K. Gujral Punjab Technical Universitydde.ptu.ac.in/images/announce/Readmission-Form-after-2015.pdf · Education & Industrial Training, Chandigarh or such Examination

Annexure-II Fee Chart of courses under Distance Education Program of IKGPTU

(January-2017)

Course Semester Admission Fee Exam Fee Total Fee

PGDCA 1 8000 700 8700

2 8000 700 8700

BBA

1 9000 700 9700

2 9000 700 9700

3 9000 700 9700

4 9000 700 9700

5 9000 700 9700

6 9000 700 9700

BCOM

1 6000 700 6700

2 6000 700 6700

3 6000 700 6700

4 6000 700 6700

5 6000 700 6700

6 6000 700 6700

MBA (Readmission Only)

1 10500 700 11200

2 10500 700 11200

3 10500 700 11200

4 10500 700 11200

MCOM (Readmission Only)

1 7000 700 7700

2 7000 700 7700

3 7000 700 7700

4 7000 700 7700

BA-JMC

1 7500 700 8200

2 7500 700 8200

3 8500 700 9200

4 8500 700 9200

5 8500 700 9200

6 8500 700 9200

MA-JMC

1 8500 700 9200

2 8500 700 9200

3 8500 700 9200

4 8500 700 9200

Page 11: Readmission Form - I. K. Gujral Punjab Technical Universitydde.ptu.ac.in/images/announce/Readmission-Form-after-2015.pdf · Education & Industrial Training, Chandigarh or such Examination

Guidelines for choosing specialization in MBA Semester 3 & 4

Dear Student

As per the course scheme of MBA (refer Prospectus), we offer five areas of specialization in 3rd & 4th

semester. List of specializations is given below:

Sr. no. Specialization

1. Human Resource Management (HRM)

2. Marketing

3. Finance

4. Operations

5. Information Technology (IT)

In 3rd sem, MBA student has to study 4 specialization subjects along with two general subjects.

Similarly in 4th sem he will study 4 specialization subjects along with two general subjects

There are two modes of choosing specializations. Student has to choose any one from following

modes:

1. Dual Specialization

In this mode, student will opt for two different specializations from above table. For

example say Marketing & Finance.

Now for the 4 specialization subjects in 3rd sem, student will study two compulsory

subjects from Marketing pool & two compulsory subjects from Finance pool.

Similarly for the 4 specialization subjects in 4th sem, student will study two

compulsory subjects from Marketing pool & two compulsory subjects from Finance

pool.

In this way, dual specialization student will study total 4 subjects of Marketing and 4

subjects of Finance in 3rd & 4th sem

2. Super Specialization

In this mode, student will opt for only one specialization out of the given five

specializations. For example, say the student opts for super specialization in

Marketing stream.

Now for the 4 specialization subjects in 3rd sem, student will study two compulsory

subjects from Marketing pool & two optional subjects from Marketing pool.

Similarly for the 4 specialization subjects in 4th sem, student will study two

compulsory subjects from Marketing pool & two optional subjects from Marketing

pool.

In this way, Super Specialization student will study total 8 subjects of Marketing in

3rd & 4th sem

Note: Specialization mode and area of specialization once chosen in 3rd semester

cannot be changed at any later stage. So the students are advised to

carefully decide their specialization mode and area of specialization while

entering the 3rd semester.

Typewritten text
Annexure-III
Page 12: Readmission Form - I. K. Gujral Punjab Technical Universitydde.ptu.ac.in/images/announce/Readmission-Form-after-2015.pdf · Education & Industrial Training, Chandigarh or such Examination

Page 1 of 3

IKG Punjab Technical University Jalandhar

Directorate of Distance Education

Specialization Form for MBA

1. Student is advised to carefully study the Prospectus and Guidelines for choosing specialization of MBA

before filling this form. Specializations once chosen will be final and no request for change will be

entertained later.

2. Specialization chosen in 3rd semester will remain same in 4th sem. So student must be very careful before

choosing his specialization in 3rd semester.

Roll Number………………………Course…………. …………….Semester………………

Student Name…………………… …………….Date of Birth……..……………………....

Father’s Name……………………………………Mother’s Name………………………….

Email ID…………………………..Mobile No………………………………………………

S. No. Area of Specialization

1. Human Resource Management (HRM)

2. Marketing

3. Finance

4. Operations

5. Information Technology (IT)

Select the mode of specialization and area of specialization: (‘√’ mark desired mode); 1. Dual Specialization

(Tick) Specialization-I Specialization-II

2. Super Specialization (Tick) Super Specialization

Signature of Student……………………….Place………………………Date……………….

Page 13: Readmission Form - I. K. Gujral Punjab Technical Universitydde.ptu.ac.in/images/announce/Readmission-Form-after-2015.pdf · Education & Industrial Training, Chandigarh or such Examination

Page 2 of 3

Select your specialization subjects by tick (√) marking against the chosen subjects:

3rd Semester MBA Specialization Subjects Sr.

no. Specializations Subjects

‘√’

only

1 Marketing

Compulsory Subjects

MBA 901 (M) Consumer Behaviour

MBA 902 (M) Advertising Management

Optional Subjects

MBA 903 Products and Brand Management

MBA 904 Retail and Franchising

MBA 905 Rural and Industrial Marketing

2 Finance

Compulsory Subjects

MBA 921 Security Analysis and Portfolio Management

MBA 922 Management of Financial Services

Optional Subjects

MBA 923 Direct Tax Planning

MBA 924 Strategic Financial Management

MBA 925 Treasury and Credit risk Management

3 Operations

Compulsory Subjects

MBA 941 Project Management

MBA 942 Total Quality Management

Optional Subjects

MBA 943 Materials Management

MBA 944 Production Planning and Control

MBA 945 Managing ERP

4 Human Resource

Management

Compulsory Subjects

MBA 961 Social Security & Labour Welfare

MBA962 Training & Development

Optional Subjects

MBA963 Industrial Psychology

MBA 964 Manpower planning

MBA 965 Conflict and Negotiations

5 Information Technology

Compulsory Subjects

MBA 981 Programming in C

MBA 982 Relational Database Management System

Optional Subjects

MBA 983 Software Engineering

MBA 984 Enterprise Recourse Planning

MBA 985 Data Mining and Pattern Recognition

Certified that I have carefully read all the terms and conditions related to choosing specializations in

MBA as mentioned in my prospectus as well as concerned guidelines. All the details furnished above

are correct to the best of my knowledge and belief. If at any later stage, I am found to be

ineligible, university can cancel my admission and decision of the university shall be final.

Signature of Student……………………….Place………………………Date………………………..

Page 14: Readmission Form - I. K. Gujral Punjab Technical Universitydde.ptu.ac.in/images/announce/Readmission-Form-after-2015.pdf · Education & Industrial Training, Chandigarh or such Examination

Page 3 of 3

Select your specialization subjects by tick (√) marking against the chosen subjects:

4th Semester MBA Specialization Subjects Sr.

no. Specializations Subjects

‘√’

only

1 Marketing

Compulsory Subjects

MBA 906 (M) Service Marketing

MBA 907 (M) International Marketing

Optional Subjects

MBA 908 Sales and Distribution Management

MBA 909 Logistics Management

MBA 910 Customer Relationship Management

2 Finance

Compulsory Subjects

MBA 926 International Finance

MBA 927 Banking and Insurance Operations

Optional Subjects

MBA 928 Global Capital Market

MBA 929 Management Control System

MBA 930 Financial Engineering

3 Operations

Compulsory Subjects

MBA 945 Supply Chain Management

MBA 946 Technology Management

Optional Subjects

MBA 947 Knowledge Management

MBA 948 Manufacturing Policy and Implementation

MBA 949 Lean Manufacturing

4 Human Resource

Management

Compulsory Subjects

MBA 966 Organization Developments

MBA967 International Human Resource Management

Optional Subjects

MBA968 Industrial Relations and Labour Laws

MBA 969 People Management and Leadership

MBA 970 Stress Management

5 Information Technology

Compulsory Subjects

MBA 986 Programming in C++

MBA 987 E-commerce and Cyber Securities

Optional Subjects

MBA 988 System Analyses and Design

MBA 989 Visual Programming

MBA 990 Introductions to Computer Networks

Certified that I have carefully read all the terms and conditions related to choosing specializations in

MBA as mentioned in my prospectus as well as concerned guidelines. All the details furnished above

are correct to the best of my knowledge and belief. If at any later stage, I am found to be

ineligible, university can cancel my admission and decision of the university shall be final.

Signature of Student……………………….Place………………………Date………………………..

Page 15: Readmission Form - I. K. Gujral Punjab Technical Universitydde.ptu.ac.in/images/announce/Readmission-Form-after-2015.pdf · Education & Industrial Training, Chandigarh or such Examination

IKGPTU Distance Education Program

Annexure-III

Form for Elective Subject MCA 3rd semester

Note: Student is advised to carefully decide his Elective subject of MCA before filling this form. Elective Subject

once chosen will be final and no request for change will be entertained later.

Roll Number………………………Course…………. …………….Semester………………

Student Name…………………… …………….Date of Birth……..……………………....

Father’s Name……………………………………Mother’s Name………………………….

Email ID…………………………..Mobile No………………………………………………

Student will opt for only one elective subject out of given three elective subjects. Select your Elective

subject by tick (√) marking against the chosen subject:

3rd Semester MCA Elective Subjects

Sr. No. Subjects ‘√’ only

1 MCA 305 A System Programming

2 MCA 305 B Theory of Computation

3 MCA 305 C Embedded Systems

Certified that I have carefully read all the terms and conditions related to choosing elective subject in

MCA as mentioned in my prospectus as well as concerned guidelines. All the details furnished above

are correct to the best of my knowledge and belief.

Signature of Student……………………….Place………………………Date………………………..

Page 16: Readmission Form - I. K. Gujral Punjab Technical Universitydde.ptu.ac.in/images/announce/Readmission-Form-after-2015.pdf · Education & Industrial Training, Chandigarh or such Examination

IKG Punjab Technical University Jalandhar

Distance Education Program

Specialization Form for M.Com. (To be filled only by 3rd Sem students)

Note: Student is advised to carefully study the Prospectus and Guidelines for choosing specialization of M.Com

before filling this form. Specializations once chosen shall be final and no request for change will be

entertained later.

Roll Number…………………………………..Course…………. ………..Semester………………...

Student Name…………………… …………...Email ID……..…………..Mobile No………………

Each M.Com. student shall choose an area of specialization in 3rd semester. The same specialization

shall continue in 4th semester also. Following two specializations are offered:

1. Finance and Accounting

2. Banking & Insurance

In each of these specializations, there will be SIX papers in total. Three papers will have to be

studied in 3rd Semester & remaining three papers will be studied in 4th semester.

Select your specialization by tick (√) marking against ONLY ONE chosen specialization:

Specialization Sem Subjects ‘√’

only

Finance & Accounting

3

1.International Accounting (MCOP-FA-303)

2.International Financial Management (MCOP-FA-304)

3.Indian Financial System(MCOP-FA-305)

4

4.Security Analysis & Portfolio Management (MCOP-FA-403)

5.Management of Financial Services(MCOP-FA-404)

6.Securities Market Operations(MCOP-FA-405)

Specialization Sem Subjects ‘√’

only

Banking & Insurance

3

1.Principles and Practices of Banking (MCOP-BI-303)

2.Banking Laws (MCOP-BI-304)

3.Funds Management in Banks & Insurance Companies(MCOP-

BI-305)

4

4.Insurance & Risk Management (MCOP-BI-403)

5.Principles & Practices of Life Insurance (MCOP-BI-404)

6.Principles & Practices of General Insurance (MCOP-BI-405)

Certified that I have carefully read all the terms and conditions related to choosing specializations in

M.Com as mentioned in my Prospectus as well as concerned guidelines. All the details furnished

above are correct to the best of my knowledge and belief.

Signature of Student……………………….Place………………………Date………………………..

Typewritten text
Annexure-III
Page 17: Readmission Form - I. K. Gujral Punjab Technical Universitydde.ptu.ac.in/images/announce/Readmission-Form-after-2015.pdf · Education & Industrial Training, Chandigarh or such Examination

Note: Actually established Examination Centers may vary from this list as per administrative requirements.

Annexure-IV

Tentative List of Examination Center Locations for April-2017 Examinations of IKGPTU DEP

S.No Location State

1 Abhipur Punjab

2 Amritsar Punjab

3 Baddowal Punjab

4 Badhani Punjab

5 Barnala Punjab

6 Bathinda Punjab

7 Bela(Ropar) Punjab

8 Bhaddal Punjab

9 BhawaniGarh Punjab

10 Bhedpura Punjab

11 Budhlada Punjab

12 Chhokran(Nawahshahr) Punjab

13 Dakha Punjab

14 Dalewal Punjab

15 DASUYA Punjab

16 Derabassi Punjab

17 Dhariwal Punjab

18 Dinanagar Punjab

19 FarehgarhSahib Punjab

20 Ferozepur Punjab

21 Gharuan Punjab

22 GholuMajra Punjab

23 Giddabaha Punjab

24 Gurdaspur Punjab

25 GurusarSadhar Punjab

26 GurusarSatlaniSahib Punjab

27 Hoshiarpur Punjab

28 Jagraon Punjab

29 Jalandhar Punjab

30 Jhanjeri Punjab

31 Kapurthala Punjab

32 Kariam(Nawanshahar) Punjab

33 KataniKalan Punjab

34 Khanna Punjab

35 Kharar Punjab

36 KilliChahdan Punjab

37 KotlaDoom Punjab

38 Lalru Punjab

39 Landran Punjab

40 LeheraBega Punjab

41 Lehragaga Punjab

42 Loharan(Jalandhar) Punjab

43 Ludhiana Punjab

44 Malout Punjab

45 Manawal Punjab

46 MandiGobindgarh Punjab

47 MandiKillianwali Punjab

48 Mastuana Punjab

49 Moga Punjab

Page 1 of 2

Page 18: Readmission Form - I. K. Gujral Punjab Technical Universitydde.ptu.ac.in/images/announce/Readmission-Form-after-2015.pdf · Education & Industrial Training, Chandigarh or such Examination

Note: Actually established Examination Centers may vary from this list as per administrative requirements.

Annexure-IV

Tentative List of Examination Center Locations for April-2017 Examinations of IKGPTU DEP

S.No Location State

50 Mohali Punjab

51 Mukerian Punjab

52 Muktsar Punjab

53 Nakodar Punjab

54 Nepra Punjab

55 Padhiana Punjab

56 Pathankot Punjab

57 Patiala Punjab

58 Patti Punjab

59 Phagwara Punjab

60 Raikot Punjab

61 Railmajra Punjab

62 Rakhra Punjab

63 RamNagar(Banur) Punjab

64 Sangrur Punjab

65 Sardulgarh Punjab

66 ShahpurJalandhar Punjab

67 ShahpurKandi Punjab

68 Tangori Punjab

Page 2 of 2