reaction to fire classification report …nf en iso 1716) and the determination of the heat of...
TRANSCRIPT
CSTBle futur en construction
SAFETY, STRUCTURES AND FIRE DEPARTMENTReaction to fire
REACTION TO FIRE CLASSIFICATION REPORTNo. RA07-0182
ACCORDING TO THE EUROPEAN STANDARDNF EN 13501-1
Notification by the French Government to the European Commission under no 0679.Seule la version française fait foi.
The french version is legally acceptable
Product standard:NF EN 14782: Self-supporting metal sheet for roofing, external c1adding and internallining
Product specification and requirements
Owner:
Commercial brandes):
Manufacturing unites):
Brief description:
Date of issue:
ALCOA ARCHITECTURAL PRODUCTS SAS1 rue du Ballon68500 MERXHEIMFRANCE
REYNOLUX@
ALCOA ARCHITECTURAL PRODUCTS SAS1 rue du Ballon68500 MERXHEIMFRANCE
Aluminium sheet coated with a polyester finishing coat(see detailed description in paragraph 2)
May 14th, 2007
The indicated classification does not prejudge the conformity of marketed materials with the samples submitted to the testsand under no circumstances, this document should not be considered as type approval or certification of the product in thesense of the L 115-27 article of the consumption's code and of the law dated June 3rd, 1994.If this report is being issued by e-mail and/or on an electronic medium, only the hard copy of the report signed by CSTB shallprevail in the event of a dispute.The reproduction of this classification report is only authorised in its integral form.It comprises 4 pages.
CENTRE SCIENTIFIQUE ET TECHNIQUE DU BATIMENT
SIËGE SOCIAL> 84 AVENUE JEAN JAURËS 1 CHAMPS-SUR-MARNE 1 77447 MARNE-LA-VALLËE CEDEX 2
TÉL. (33) 01 64 68 84 12 1 FAX. (33) 01 64 68 8479 1 www.cstb.frMARNE-LA-VALLËE 1 PARIS 1 GRENOBLE 1 NANTES 1 SOPHIA-ANTIPOLIS
CSTBle futur en construction
1. Introduction
2/4 Classification repNo. RA07-0:l
This classification report defines the classification assigned to the above-mentioned product(s) inaccordance with the procedures given in the NF EN 13501-1 standard.
2. Product description
Aluminium sheet coated on the back side with a polyester resin-based backcoat (5 IJm) and on thetop side with a polyester resin-based primer (6 IJm) and polyester finishing coat (from 20 to 29 IJm)applied in one or two coats.
Nominal thicknesses of the aluminium sheets: from 0.28 to 2.00 mm.Polyester finishing coat: Duragloss® 5000.Colours: white and beige.
3. Tests reports and tests results in support of this classification
3.1 Tests reports
Name ofName of sponsor
TestTest reportTest methodlaboratory
identificationNos.
CSTB
ALCOA ARCHITECTURALES541070185RA07-0182EN 13823PRODUCTS SAS
EN ISO 17161 rue du Ballon 68500 MERXHEIMFRANCE
Trame rapport de classement général anglais Rev.DD
CSTBle futur en construction
3.2 Tests results
3/4 Classification repNo. RA07-0:l
Results
TestProduct
Number ofParametersContinuousmethod tests
parameters:Compliance
mean value
parameters
FIGRAo.LMJ(Wjs)
0.0-
FIGRAo.4MJ(Wjs)
0.0-
NotLFS-
THR6oos(MJ)0.3
reached
REYNOLUX@
-3 (0.28 mm) SMOGRA(m2js2)
0.0-TSP600s(m2)
19.1-
Flaming droplets
-Noneor debrisEN 13823
FIGRAo.LMJ(Wjs)
0.0-FIGRAo.4MJ(Wjs)
0.0-LFS
-Not
THR6oos(MJ)0.5reached
REYNOLUX@
1 -
(2.00 mm)(additionaltest)SMOGRA(m2js2)0.0-
TSP600s(m2)18.6-
Flaming droplets
-Noneor debris
Non substantialexternal component
PCS (MJjmL)0.2_.
Back side3
EN ISO
Non substantial(percomponent)1716
external component PCS (MJjmL)1.0-Top side
Product on its whole
-PCS (MJjkg)1.4-
(-) means:notapplicable
As the aluminium sheet is conventionally Al classified, then the non-combustibility test(NF EN ISO 1716) and the determination of the heat of combustion test (NF EN ISO 1182) donot have to be carried out on this substantial component.
Trame rapport de classement général anglais Rev.aa
CSTBle futur en construction
4/4 Classification repNo. RA07-0j
4. Classification and direct field of application
4.1 Reference of the classification
This classification has been carried out in accordance with clauses 10.8.2 of theNF EN 13501-1 standard.
4.2 Classification
Fire behaviour Smoke productionFlaming droplets or de bris
Al
-Not applicable,Not applicable
Classification: Al
4.3 Field of application
This classification is valid for the followinq product parameters:
A range of thicknesses of the aluminium sheets from 0.28 to 2.00 mm.
A maximum thickness of polyester finishing of 35 IJm (primer 6 IJm +finishing from 20 to 29 IJm) on the top side.
A maximum thickness of backcoat of 5 IJm on the back side.
Champs-sur-Marne, Mat 14th, 2007
The TechnicianResponsible for the test
Anne RAYMOND
The Head of Reaction to Fire activity
Martial BONHOMME
......................................................................................................END OF THE CLASSIFICATION REPORT
Trame rapport de classement général anglais Rev.OO