rcommands...drop-prob2 (optional)dropprobabilityvalue weight2 (optional)queuelengthweight weight2...

R Commands

• radius-server deadtime, on page 6• radius-server directed-request, on page 7• radius-server host key 0 6 7, on page 8• radius-server host test, on page 10• radius-server key 0 6 7, on page 11• radius-server pss-clean, on page 12• radius-server retransmit, on page 13• radius-server test, on page 14• radius-server timeout, on page 15• random-detect, on page 16• random-detect2 minimum-threshold2 maximum-threshold2, on page 18• random-detect2 non-ecn minimum-threshold2 maximum-threshold2 drop, on page 19• random-detect, on page 20• random-detect cos-based, on page 22• rate-limit, on page 24• rate-limit cpu direction input output both pps action log, on page 25• rate-limit cpu direction input output both pps action log, on page 26• rate-limit packet_in burst, on page 27• rate-limit packet_in burst, on page 28• rate-mode, on page 29• rd, on page 30• rd auto, on page 31• rd auto, on page 32• receiver, on page 33• receiver, on page 34• reconnect-interval, on page 35• record-route, on page 36• record-route, on page 37• record, on page 38• record, on page 39• record, on page 40• record, on page 41• record, on page 42

R Commands1

• record netflow-original, on page 43• record netflow, on page 44• record netflow, on page 45• record netflow, on page 46• record netflow protocol-port, on page 47• redistribute bgp, on page 48• redistribute bgp eigrp isis ospf rip static direct amt lisp route-map, on page 49• redistribute filter route-map, on page 50• redistribute filter route-map, on page 51• redistribute maximum-prefix, on page 52• redistribute maximum-prefix, on page 53• redistribute maximum-prefix, on page 54• redistribute maximum-prefix, on page 55• redistribute maximum-prefix, on page 56• redistribute maximum-prefix, on page 57• redistribute route-map, on page 58• redistribute route-map, on page 59• redistribute route-map, on page 60• redistribute route-map, on page 61• redistribute route-map, on page 62• redistribute route-map, on page 63• redistribute route-map, on page 64• redistribute route-map, on page 65• redistribute route-map, on page 66• redistribute route-map, on page 67• redistribute route-map, on page 68• redownload forwarding state, on page 69• redundancy-group, on page 70• reference-bandwidth, on page 71• reference-bandwidth, on page 72• refresh profile, on page 73• register-database-mapping, on page 74• register-route-notifications, on page 75• reload, on page 76• reload cancel, on page 77• reload in, on page 78• reload module, on page 79• reload module force-dnld, on page 80• reload non-interruptive, on page 81• reload power-cycle, on page 82• reload sync-adjacency, on page 83• reload sync-adjacency, on page 84• reload timer, on page 85• reload vdc, on page 86• reload vdc, on page 87• remark, on page 88

R Commands2

R Commands

• remark, on page 89• remark, on page 90• remote-as, on page 91• remote-span, on page 92• remote, on page 93• remove-private-as, on page 94• reoptimize events link-up, on page 95• replay-protection, on page 96• report, on page 97• report, on page 98• report, on page 99• report, on page 100• report, on page 101• report, on page 102• report, on page 103• report, on page 104• report, on page 105• report, on page 106• report, on page 107• report, on page 108• report, on page 109• report, on page 110• report, on page 111• report, on page 112• request-data-size, on page 113• request-data-size, on page 114• request-data-size, on page 115• resequence access, on page 116• reset, on page 117• reset, on page 118• reset, on page 119• reset, on page 120• reset, on page 121• reset, on page 122• reset, on page 123• reset, on page 124• reset, on page 125• reset, on page 126• reset, on page 127• reset, on page 128• reset, on page 129• reset, on page 130• reset, on page 131• reset, on page 132• restart amt, on page 133• restart bgp, on page 134

R Commands3

R Commands

• restart eigrp, on page 135• restart fabric_mcast, on page 136• restart igmp, on page 137• restart isis, on page 138• restart msdp, on page 139• restart ospf, on page 140• restart ospfv3, on page 141• restart otv-isis, on page 142• restart pim, on page 143• restart pim6, on page 144• restart rip, on page 145• restart rsvp, on page 146• resync-database, on page 147• retain route-target all, on page 148• retain route-target all, on page 149• retransmit-interval, on page 150• retransmit-interval, on page 151• retransmit-interval, on page 152• revision, on page 153• revocation-check crl, on page 154• rewrite-evpn-rt-asn, on page 155• rewrite-rt-asn, on page 156• rfc1583compatibility, on page 157• rip shutdown, on page 158• rmdir, on page 159• rmon alarm absolute rising-threshold falling-threshold, on page 160• rmon event, on page 161• rmon hcalarm absolute startupalarm rising-threshold falling-threshold owner, on page 162• roaming-eid-prefix, on page 163• role feature-group name, on page 164• role name, on page 165• role priority, on page 166• rollback running-config checkpoint, on page 167• root-priority, on page 168• route-map, on page 169• route-map, on page 170• route-map, on page 171• route-map, on page 172• route-map out, on page 173• route-map pbr-statistics, on page 174• route-reflector-client, on page 175• route-reflector-client, on page 176• route-target both, on page 177• route-target both auto, on page 178• route-target both auto, on page 179• route-target export, on page 180

R Commands4

R Commands

• route-target export, on page 181• route-target export auto, on page 182• route-target import, on page 183• route-target import, on page 184• route-target import auto, on page 185• route delete dampen interval, on page 186• router-guard ip multicast, on page 187• router-guard ip multicast switchports, on page 188• router-id, on page 189• router-id, on page 190• router-id, on page 191• router-id, on page 192• router-id, on page 193• router-id, on page 194• router-preference maximum, on page 195• router bgp, on page 196• router eigrp, on page 197• router isis, on page 198• router ospf, on page 199• router ospfv3, on page 200• router rip, on page 201• routing-context vrf, on page 202• rsakeypair, on page 203• rtr etr eid, on page 204• rule, on page 205• rule command, on page 206• rule oid, on page 207• run-script, on page 208• run2 guestshell, on page 209• run bash, on page 210

R Commands5

R Commands

radius-server deadtime[no] radius-server deadtime

Syntax Description

(Optional) Negate a command or set its defaultsno

Configure RADIUS related parametersradius-server

duration for which non-reachable server is skippeddeadtime

Length of time, in minutesi0

Command Mode

• /exec/configure

R Commands6

R Commandsradius-server deadtime

radius-server directed-request[no] radius-server directed-request

Syntax Description



enable direct authentication requests to serverdirected-request

Command Mode

• /exec/configure

R Commands7

R Commandsradius-server directed-request

radius-server host key 0 6 7{ { [ no ] radius-server host { { key { 0 | 6 | 7 | } [ pac ] [ auth-port [ acct-port ] ] } | { [ auth-port1 ] [ acct-port1 ] } } [ { authentication [ accounting [ timeout ] [ retransmit ] ] } | { [ accounting1 ] [ timeout1 ] [ retransmit1 ] } ] } | { no radius-serverhost key } }

Syntax Description

0key



RADIUS server's DNS name or its IP addresshost

IPV4/IPV6 address or DNS namehostipname

RADIUS shared secretkey

(Optional) Secure Radius Enablepac

RADIUS shared secret(clear text)0

RADIUS shared secret(clear text)s0

(Optional) Use for accountingaccounting

(Optional) RADIUS server retransmit countretransmit

(Optional) RADIUS server retransmit counti5

(Optional) RADIUS server timeout period in secondstimeout

(Optional) RADIUS server timeout period in secondsi4

(Optional) RADIUS server retransmit countretransmit1

(Optional) RADIUS server retransmit counti7

(Optional) RADIUS server's port for authenticationauth-port

(Optional) port numberi0

(Optional) RADIUS server timeout period in secondstimeout1

(Optional) RADIUS server timeout period in secondsi6

(Optional) RADIUS server's port for accountingacct-port


(Optional) Use for accountingaccounting1

R Commands8

R Commandsradius-server host key 0 6 7

(Optional) Use for authenticationauthentication

Radius shared secret(type-6 encrypted)6

Tadius shared secret(encrypted)s6

RADIUS shared secret(encrypted)7

RADIUS shared secret(encrypted)s1

(Optional) RADIUS server's port for authenticationauth-port1


RADIUS shared secret(clear text)s2

(Optional) RADIUS server's port for accountingacct-port1


Command Mode

• /exec/configure

R Commands9

R Commandsradius-server host key 0 6 7

radius-server host test[no] radius-server host { } test { { username { [ password { | 0 | 7 } [idle-time ] ] | [ idle-time ] } } | { password { | 0 | 7 } [ idle-time ] } | { idle-time } }

Syntax Description

username



RADIUS server's DNS name or its IP addresshost

IPV4/IPV6 address or DNS namehostipname

Parameters to send test packetstest

user names0

(Optional) user password in test packetspassword

(Optional) user passwords1

(Optional) RADIUS shared secret(clear text)0

(Optional) RADIUS shared secret(clear text)s2

(Optional) RADIUS shared secret(encrypted)7

(Optional) RADIUS shared secret(encrypted)s7

(Optional) time interval for monitoring the serveridle-time

(Optional) time period in minutesi1

Command Mode

• /exec/configure

R Commands10

R Commandsradius-server host test

radius-server key 0 6 7{ { [ no ] radius-server key { 0 | 6 | 7 | } } | { no radius-server key } }

Syntax Description



Global RADIUS server shared secretkey

default RADIUS shared secret(clear text)0

default RADIUS shared secret(clear text)s0

default RADIUS shared secret(type-6 encrypted)6

default RADIUS shared secret(type-6 encrypted)s6

default RADIUS shared secret(encrypted)7

default RADIUS shared secret(encrypted)s1

default RADIUS shared secret(clear text)s2

Command Mode

• /exec/configure

R Commands11

R Commandsradius-server key 0 6 7

radius-server pss-clean[no] radius-server pss-clean

Syntax Description



Erase PSSpss-clean

Command Mode

• /exec/configure

R Commands12

R Commandsradius-server pss-clean

radius-server retransmit[no] radius-server retransmit

Syntax Description



Global RADIUS server retransmit countretransmit

Global RADIUS server retransmit counti0

Command Mode

• /exec/configure

R Commands13

R Commandsradius-server retransmit

radius-server test[no] radius-server test { { username { [ password { | 0 | 7 } [ idle-time ] ] | [idle-time ] } } | { password { | 0 | 7 } [ idle-time ] } | { idle-time } }

Syntax Description

username



Parameters to send test packetstest

user names0

(Optional) user password in test packetspassword

(Optional) user passwords1

(Optional) RADIUS shared secret(clear text)0

(Optional) RADIUS shared secret(clear text)s2

(Optional) RADIUS shared secret(encrypted)7

(Optional) RADIUS shared secret(encrypted)s7

(Optional) time interval for monitoring the serveridle-time

(Optional) time period in minutesi1

Command Mode

• /exec/configure

R Commands14

R Commandsradius-server test

radius-server timeout[no] radius-server timeout

Syntax Description



Global RADIUS server timeout period in secondstimeout

RADIUS server timeout period in secondsi0

Command Mode

• /exec/configure

R Commands15

R Commandsradius-server timeout

random-detect[no] random-detect { cos [ minimum-threshold ] { [ packets | bytes | kbytes | mbytes| ms | us ] | percent } [ maximum-threshold ] { [ packets1 | bytes1 |kbytes1 | mbytes1 | ms1 | us1 ] | percent1 } }

Syntax Description


Configure WRED parametersrandom-detect

Parameters for each cos valuecos

List of class-of-service valuescos-list

(Optional) Specify minimum threshold for WREDminimum-threshold

(Optional) Specify maximum threshold for WREDmaximum-threshold

Maximum threshold valuemax-thresh

Specify thresholds in percentpercent

Specify thresholds in percentpercent1

Minimum threshold percent of queue sizemin-percent-of-qsize

Maximum threshold percent of queue sizemax-percent-of-qsize

(Optional) Packetspackets

(Optional) Bytesbytes

(Optional) Kilo byteskbytes

(Optional) Mega bytesmbytes

(Optional) Milli second(s)ms

(Optional) Micro second(s)us

(Optional) Packetspackets1

(Optional) Bytesbytes1

(Optional) Kilo Byteskbytes1

(Optional) Mega Bytesmbytes1

(Optional) Milli second(s)ms1

(Optional) Micro second(s)us1

Command Mode

R Commands16

R Commandsrandom-detect

• /exec/configure/policy-map/type/queuing/class

R Commands17


random-detect2 minimum-threshold2 maximum-threshold2[no] random-detect2 minimum-threshold2 { packets2 | bytes2 | kbytes2 | mbytes2 }maximum-threshold2 { packets3 | bytes3 | kbytes3 | mbytes3 } [ drop-probability2 weight2 [ cap-average2 ] ]

Syntax Description


Configure WRED parametersrandom-detect2

Specify minimum threshold for WREDminimum-threshold2

Specify maximum threshold for WREDmaximum-threshold2

Packetspackets2

Bytesbytes2

Kilo Byteskbytes2

Mega Bytesmbytes2

Packetspackets3

Bytesbytes3

Kilo Byteskbytes3

Mega Bytesmbytes3

(Optional) Drop Probability at Maximum Thresholddrop-probability2

(Optional) Drop Probability Valuedrop-prob2

(Optional) Queue length weightweight2

(Optional) Queue length weightweight2

(Optional) If average queue length is more, replace average queue lengthwith current queue length

cap-average2

Command Mode


R Commands18

R Commandsrandom-detect2 minimum-threshold2 maximum-threshold2

random-detect2 non-ecn minimum-threshold2maximum-threshold2 drop

[no] random-detect2 non-ecn minimum-threshold2 { packets2 | bytes2 | kbytes2 | mbytes2 }maximum-threshold2 { packets3 | bytes3 | kbytes3 | mbytes3 } { drop-probability2 }

Syntax Description


Configure WRED parametersrandom-detect2

Configure WRED parameters for non-ecnnon-ecn

Specify minimum threshold for WREDminimum-threshold2

Specify maximum threshold for WREDmaximum-threshold2

Packetspackets2

Bytesbytes2

Kilo Byteskbytes2

Mega Bytesmbytes2

Packetspackets3

Bytesbytes3

Kilo Byteskbytes3

Mega Bytesmbytes3

Drop Probability at Maximum Thresholddrop-probability2

Drop Probability Valuedrop-prob2

Command Mode


R Commands19

R Commandsrandom-detect2 non-ecn minimum-threshold2 maximum-threshold2 drop

random-detect[no] random-detect [ { minimum-threshold { packets | bytes | kbytes | mbytes }maximum-threshold { packets1 | bytes1 | kbytes1 | mbytes1 } drop-probability weight [ cap-average ] } | threshold { burst-optimized | mesh-optimized } ] [ ecn ]

Syntax Description



(Optional) Thresholdthreshold

(Optional) Threshold optimized for bursty trafficburst-optimized

(Optional) Threshold optimized for mesh trafficmesh-optimized



(Optional) Maximum threshold valuemax-thresh









(Optional) Drop Probability at Maximum Thresholddrop-probability

(Optional) Drop Probability Valuedrop-prob

(Optional) Queue length weightweight

(Optional) Queue length weightweight

(Optional) If average queue length is more, replace average queue lengthwith current queue length

cap-average

(Optional) ECNecn

Command Mode

R Commands20



R Commands21


random-detect cos-based[no] random-detect cos-based [ aggregate [ minimum-threshold ] { [ packets | bytes | kbytes |mbytes | ms | us ] | percent } [ maximum-threshold ] { [ packets1 |bytes1 | kbytes1 | mbytes1 | ms1 | us1 ] | percent1 } ]

Syntax Description



Configure WRED parameters for cos-based modecos-based

(Optional) ConfigureWREDparameters to same value for all sub-classesaggregate



(Optional) Maximum threshold valuemax-thresh

(Optional) Specify thresholds in percentpercent

(Optional) Specify thresholds in percentpercent1

(Optional) Minimum threshold percent of queue sizemin-percent-of-qsize

(Optional) Maximum threshold percent of queue sizemax-percent-of-qsize





(Optional) Milli second(s)ms

(Optional) Micro second(s)us





(Optional) Milli second(s)ms1

(Optional) Micro second(s)us1

Command Mode

R Commands22

R Commandsrandom-detect cos-based


R Commands23

R Commandsrandom-detect cos-based

rate-limitrate-limit { auto | } | no rate-limit

Syntax Description

Negate a command or set its defaultsno

Set the Rate limit for SPAN packetsrate-limit

Set the Rate limit using auto valueauto

Enter the percentage of the maximum rate for SPAN packetsrate_value

Command Mode

• /exec/configure/monitor-local-src /exec/configure/config-monitor/exec/configure/config-monitor-erspan-src

R Commands24

R Commandsrate-limit

rate-limit cpu direction input output both pps action log{ rate-limit cpu direction { input | output | both } pps action log } | { no rate-limit cpu direction [{ input | output | both } pps action log ] }

Syntax Description


set packet per second rate limitrate-limit

Supervisor CPU limitscpu

input/output directiondirection

set max input packet rateinput

set max output packet rateoutput

set max input and output packet rateboth

packet per secondpps

pps valuepps-val

log actionaction

write a syslog message if PPS hits rate-limitlog

Command Mode

• /exec/configure

R Commands25

R Commandsrate-limit cpu direction input output both pps action log

rate-limit cpu direction input output both pps action log{ rate-limit cpu direction { input | output | both } pps action log } | { no rate-limit cpu direction [{ input | output | both } pps action log ] }

Syntax Description


set packet per second rate limitrate-limit

Supervisor CPU limitscpu

input/output directiondirection

set max input packet rateinput

set max output packet rateoutput

set max input and output packet rateboth

packet per secondpps

pps valuepps-val

log actionaction

write a syslog message if PPS hits rate-limitlog

Command Mode

• /exec/configure/if-eth-base /exec/configure/if-eth-any /exec/configure/if-mgmt-config

R Commands26

R Commandsrate-limit cpu direction input output both pps action log

rate-limit packet_in burstrate-limit packet_in burst | no rate-limit

Syntax Description


OpenFlow rate limit to controllerrate-limit

packet in rate (pps)packet_in

packets per secondpacketin-val

Maximum number of packets to controller (pps)burst

packets per secondburst-val

Command Mode

• /exec/configure/openflow/switch

R Commands27

R Commandsrate-limit packet_in burst

rate-limit packet_in burstrate-limit packet_in burst | no rate-limit

Syntax Description


OpenFlow rate limit to controllerrate-limit

packet in rate (pps)packet_in

packets per secondpacketin-val

Maximum number of packets to controller (pps)burst

packets per secondburst-val

Command Mode

• /exec/configure/openflow/switch/sub-switch

R Commands28

R Commandsrate-limit packet_in burst

rate-moderate-mode [ force ] | no rate-mode [ ] [ force ]

Syntax Description


Enter the rate moderate-mode

(Optional) This option will shutdown all ports in port-groupmomentarilyforce

Interface port speedratemode

Command Mode

• /exec/configure/if-ethernet-all /exec/configure/if-eth-base

R Commands29

R Commandsrate-mode

rd{ rd { | } } | { no rd [ { | } ] }

Syntax Description


VPN Route Distinguisherrd

VPN route distinguisher in aa4:nn or ip:nn formatext-comm-rd-aa4nn2

VPN route distinguisher in aa:nn formatext-comm-rd-aa2nn4

Command Mode

• /exec/configure/evpn/evi-sr

R Commands30

R Commandsrd

rd auto{ rd { auto | | } } | { no rd [ { auto | | } ] }

Syntax Description



Generate RD automaticallyauto



Command Mode

• /exec/configure/vrf

R Commands31

R Commandsrd auto

rd auto{ rd { auto | | } } | { no rd [ { auto | | } ] }

Syntax Description



Generate RD automaticallyauto



Command Mode

• /exec/configure/evpn/evi

R Commands32

R Commandsrd auto

receiver[no] receiver

Syntax Description


Policies for a Local Receiverreceiver

Command Mode

• /exec/configure/nbm-host-policy

R Commands33

R Commandsreceiver

receiver[no] receiver

Syntax Description


Policies for a Local Receiverreceiver

Command Mode

• /exec/configure/nbm-vrf/nbm-host-policy

R Commands34

R Commandsreceiver

reconnect-intervalreconnect-interval | no reconnect-interval [ ]

Syntax Description


Configure connection reconnect intervalreconnect-interval

Interval in secondsinterval

Command Mode

• /exec/configure/router-bgp/vrf-cmds

R Commands35

R Commandsreconnect-interval

record-route[no] record-route

Syntax Description


Record the route used by the LSPrecord-route

Command Mode

• /exec/configure/te/lsp-attr

R Commands36

R Commandsrecord-route

record-route[no] record-route

Syntax Description


record the route used by the tunnelrecord-route

Command Mode

• /exec/configure/if-te /exec/configure/tunnel-te/cbts-member

R Commands37

R Commandsrecord-route

record[no] record

Syntax Description

Record to be monitoredrecord

Record name to be configuredrecordname

Command Mode

• /exec/configure/config-ssx-monitor

R Commands38

R Commandsrecord

record[no] record

Syntax Description

Specify INT Record to userecord

Name of recordrecordname

Command Mode

• /exec/configure/config-int-monitor

R Commands39

R Commandsrecord

record[no] record

Syntax Description

Specify FTE Record to userecord


Command Mode

• /exec/configure/config-fte-monitor

R Commands40

R Commandsrecord

record[no] record

Syntax Description

Specify Flow Record to userecord


Command Mode

• /exec/configure/nfm-monitor

R Commands41

R Commandsrecord

record[no] record

Syntax Description



Command Mode


R Commands42

R Commandsrecord

record netflow-original[no] record netflow-original

Syntax Description


Traditional IPv4 input NetFlow with origin ASsnetflow-original

Command Mode


R Commands43

R Commandsrecord netflow-original

record netflow[no] record netflow { ipv6 { original-input } }

Syntax Description


Traditional NetFlow collection schemesnetflow

IPv6 collection schemesipv6

Input NetFloworiginal-input

Command Mode


R Commands44

R Commandsrecord netflow

record netflow[no] record netflow { ipv4 { original-input } }

Syntax Description



Traditional IPv4 NetFlow collection schemesipv4

Traditional IPv4 input NetFloworiginal-input

Command Mode


R Commands45


record netflow[no] record netflow { layer2-switched { input } }

Syntax Description



Traditional L2 NetFlow collection schemeslayer2-switched

Input NetFlowinput

Command Mode


R Commands46


record netflow protocol-port[no] record netflow protocol-port

Syntax Description



Protocol and Ports aggregation schemeprotocol-port

Command Mode


R Commands47

R Commandsrecord netflow protocol-port

redistribute bgp{ redistribute { { bgp } | { eigrp | isis | ospfv3 | rip } | static | direct | amt | lisp } route-map { | } } | { no redistribute { { bgp } | { eigrp | isis | ospfv3 | rip } |static | direct | amt | lisp } [ route-map { | } ] }

Syntax Description


Redistribute information from another routing protocolredistribute

Border Gateway Protocol (BGP)bgp

Autonomous system numberas

Enhanced Interior Gateway Protocol (EIGRP)eigrp

ISO Intermediate-to-Intermediate (IS-IS)isis

Open Shortest Path First (OSPFv3)ospfv3

Routing Information Protocol (RIP)rip

Process Tagptag

Staticstatic

Directly connecteddirect

AMT anycast prefixamt

LISP EID-prefixeslisp

Policy to constrain redistributionroute-map

Route-map namepolicy-name

An existing routing-rules policyrtr_pol_name

Command Mode

• /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

R Commands48

R Commandsredistribute bgp

redistribute bgp eigrp isis ospf rip static direct amt lisproute-map

{ redistribute { bgp | { eigrp | isis | ospf | rip } | static | direct | amt | lisp } route-map { | } } | { no redistribute { bgp | { eigrp | isis | ospf | rip } | static| direct | amt | lisp } [ route-map { | } ] }

Syntax Description





ISO Intermediate-to-Intermediate (IS-IS)isis

Open Shortest Path First (OSPFv2)ospf

Enhanced Interior Gateway Protocol (EIGRP)eigrp


Protocol Tagptag

Staticstatic





Route-map namepolicy-name


Command Mode

• /exec/configure/router-ospf /exec/configure/router-ospf/vrf

R Commands49

R Commandsredistribute bgp eigrp isis ospf rip static direct amt lisp route-map

redistribute filter route-map[no] redistribute filter route-map { | }

Syntax Description



Filter redistributed routesfilter

Route-map to constrain redistributionroute-map

A 'routing-rules' route-map namemap-name


Command Mode

• /exec/configure/l2mp-isis/l2mp-isis-vrf-common

R Commands50

R Commandsredistribute filter route-map

redistribute filter route-map[no] redistribute filter route-map { | }

Syntax Description



Filter redistributed routesfilter




Command Mode

• /exec/configure/otv-isis/otv-isis-vrf-common

R Commands51

R Commandsredistribute filter route-map

redistribute maximum-prefixredistribute maximum-prefix [ ] [ warning-only | withdraw [ ] ] | no redistribute maximum-prefix [ [ ] [ warning-only | withdraw [ ] ] ]

Syntax Description



Max number of prefixes redistributedmaximum-prefix

max numbermaximum

(Optional) Threshold in %, at which message is generatedthreshold

(Optional) Warning msg is logged when max is reachedwarning-only

(Optional) Withdraw all redistributed routeswithdraw

(Optional) No of times to retry to get redist routes againretries

(Optional) Time between the retriestimeout

Command Mode

• /exec/configure/router-isis/router-isis-af-ipv6

R Commands52

R Commandsredistribute maximum-prefix


Syntax Description




max numbermaximum






Command Mode


R Commands53



Syntax Description




max numbermaximum






Command Mode

• /exec/configure/router-isis/router-isis-vrf-common

R Commands54


redistribute maximum-prefix{ redistribute maximum-prefix [ ] [ warning-only | withdraw [ ] ] } | { no redistribute maximum-prefix }

Syntax Description



Maximum number of prefixes redistributed to protocolmaximum-prefix

Maximum number of IP prefixes redistributedmaximum

(Optional) Threshold value (%) at which to generate a warning messagethreshold

(Optional) Log a warning message when limit is exceededwarning-only


(Optional) Number of times to retry to get the redistributed routes againretries

(Optional) Timeout between each retriestimeout

Command Mode

• /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

R Commands55



Syntax Description




max numbermaximum


(Optional) Warning msg is logged when threshold is reachedwarning-only


(Optional) Number of attempts to receive redistributed routes after maxis reached

retries

(Optional) Retry intervaltimeout

Command Mode

• /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

R Commands56


redistribute maximum-prefix{ redistribute maximum-prefix [ ] [ warning-only | withdraw [ ] ] } | { no redistribute maximum-prefix [ ] [ warning-only | withdraw [ ] ] }

Syntax Description



Maximum number of prefixes redistributed to protocolmaximum-prefix

Maximum number of IP prefixes redistributedmaximum

(Optional) Threshold value (%) at which to generate a warning messagethreshold

(Optional) Log a warning message when limit is exceededwarning-only


(Optional) Number of times to retry to get the redistributed routes againretries

(Optional) Timeout between each retriestimeout

Command Mode


R Commands57


redistribute route-map[no] redistribute { bgp | { eigrp | isis | ospfv3 | rip } | static | direct | amt } route-map { | }

Syntax Description





IS-IS Routing for IPv6isis

Open Shortest Path First (OSPF) V3ospfv3

Enhanced Interior Gateway Protocoleigrp

RIP for IPv6 (RIPNG)rip

Process tagtag

Static routesstatic






Command Mode


R Commands58

R Commandsredistribute route-map

redistribute route-map[no] redistribute { bgp | { eigrp | isis | ospfv3 | rip } | static | direct | amt | lisp } route-map

Syntax Description


RIP redistribute routes from other routing protocolredistribute



Enhanced Interior Gateway Routing Protocol (EIGRP)eigrp

Intermediate-to-intermediate (ISIS)isis


Open Shortest Path First (OSPFv3)ospfv3

Process tagtag

Static routesstatic

Directly connected routesdirect




Route-map namemap-name

Command Mode

• /exec/configure/router-rip/router-rip-af-ipv6 /exec/configure/router-rip/router-rip-vrf-af-ipv6

R Commands59


redistribute route-map[no] redistribute { bgp | { eigrp | isis | ospf | rip } | static | direct | amt | lisp } route-map

Syntax Description


RIP redistribute routes from other routing protocolredistribute




Intermediate-to-intermediate (ISIS)isis


Open Shortest Path First (OSPFv2)ospf

Process tagtag

Static routesstatic

Directly connected routesdirect





Command Mode

• /exec/configure/router-rip/router-rip-af-ipv4 /exec/configure/router-rip/router-rip-vrf-af-ipv4

R Commands60


redistribute route-map[no] redistribute { bgp | { eigrp | isis | ospf | rip } | static | direct | amt } route-map { | }

Syntax Description






Open Shortest Path First (OSPF)ospf


RIP for IPv4rip

Process tagtag

Static routesstatic






Command Mode


R Commands61



Syntax Description








RIP for IPv4rip

Process tagtag

Static routesstatic






Command Mode


R Commands62


redistribute route-map[no] redistribute { bgp | { eigrp | isis | ospf | rip } | static | direct | amt | lisp } route-map { | }

Syntax Description









Process tagtag

Static routesstatic



AMT Anycast prefixamt




Command Mode

• /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-ipv4

R Commands63


redistribute route-map[no] redistribute { bgp | { eigrp | isis | ospfv3 | rip } | static | direct | amt | lisp } route-map { | }

Syntax Description









Process tagtag

Static routesstatic


AMT Anycast prefixamt





Command Mode

• /exec/configure/router-eigrp/router-eigrp-af-ipv6

R Commands64


redistribute route-map[no] redistribute { static | direct | amt | lisp | am | hmm | { { eigrp | isis | ospf | rip } } } route-map

Syntax Description


Configure redistributionredistribute

Static routesstatic


ISO IS-ISisis





LISP EID-prefixes in the non-default VRFlisp

AM routes (learned via ARP)am

HMM prefixhmm

Route-map applied to redistributed routesroute-map

Route-map namermap-name

Source protocol tagtag

Command Mode

• /exec/configure/router-bgp/router-bgp-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-af-ipv4

R Commands65


redistribute route-map[no] redistribute { static | direct | amt | lisp | am | hmm | { { eigrp | isis | ospfv3 | rip } } } route-map

Syntax Description


Configure redistributionredistribute

Static routesstatic


ISO IS-ISisis

Open Shortest Path First, version 3 (OSPFv3)ospfv3




LISP EID-prefixes in the non-default VRFlisp

HMM prefixhmm

AM routes (learned via ARP)am

Route-map applied to redistributed routesroute-map


Source protocol tagtag

Command Mode

• /exec/configure/router-bgp/router-bgp-af-ipv6 /exec/configure/router-bgp/router-bgp-vrf-af-ipv6

R Commands66



Syntax Description








RIP for IPv4rip

Process tagtag

Static routesstatic






Command Mode

• /exec/configure/l2mp-isis/l2mp-isis-af-ipv4

R Commands67


redistribute route-map[no] redistribute { bgp | { eigrp | isis | ospfv3 | rip } | static | direct | amt } route-map { | }

Syntax Description








RIP for IPv6 (RIPNG)rip

Process tagtag

Static routesstatic






Command Mode

• /exec/configure/l2mp-isis/l2mp-isis-af-ipv6

R Commands68


redownload forwarding stateredownload forwarding [ ipv4 | ipv6 | all ] state

Syntax Description

redownloadredownload

forwardingforwarding

(Optional) ipv4ipv4

(Optional) ipv6ipv6

(Optional) both ipv4 and ipv6all

statestate

Command Mode

• /exec

R Commands69

R Commandsredownload forwarding state

redundancy-group[no] redundancy-group

Syntax Description


Configure a redundancy-group noderedundancy-group

Command Mode

• /exec/configure/if-nve

R Commands70

R Commandsredundancy-group

reference-bandwidth[no] reference-bandwidth { [ Mbps ] | Gbps }

Syntax Description


Change reference bandwidth used for setting interface metricreference-bandwidth

Bandwidth in Mbps (Default)ref-bw-mbps

(Optional) Specify in MbpsMbps

Bandwidth in Gbpsref-bw-gbps

Specify in GbpsGbps

Command Mode


R Commands71

R Commandsreference-bandwidth

reference-bandwidth[no] reference-bandwidth { [ Mbps ] | Gbps }

Syntax Description


Change reference bandwidth used for setting interface metricreference-bandwidth

Bandwidth in Mbps (Default)ref-bw-mbps

(Optional) Specify in MbpsMbps

Bandwidth in Gbpsref-bw-gbps

Specify in GbpsGbps

Command Mode

• /exec/configure/l2mp-isis/l2mp-isis-vrf-common /exec/configure/l2mp-isis/l2mp-isis-l2-topo

R Commands72

R Commandsreference-bandwidth

refresh profile[no] refresh profile [ overwrite ]

Syntax Description


Refresh config-profilerefresh

Refresh an applied config-profileprofile

Enter the name of an applied profile as the source profileprofile

Enter the name of an unapplied profile as the destination profiledest-profile

(Optional) Override the source profile with the destination profileoverwrite

Command Mode

• /exec

R Commands73

R Commandsrefresh profile

register-database-mapping{ [ no ] register-database-mapping }

Syntax Description


Register database-mapping EID-prefix to Map-Serverregister-database-mapping

Command Mode

• /exec/configure/lisp-dynamic-eid /exec/configure/vrf/lisp-dynamic-eid

R Commands74

R Commandsregister-database-mapping

register-route-notifications{ [ no ] register-route-notifications }

Syntax Description


Register more-specific routes of the database-mapping EID-prefix toMap-Server

register-route-notifications

Command Mode


R Commands75

R Commandsregister-route-notifications

reloadreload

Syntax Description

reboot the entire boxreload

Command Mode

• /exec

R Commands76

R Commandsreload

reload cancelreload cancel

Syntax Description


Cancel scheduling of the reloadcancel

Command Mode

• /exec

R Commands77

R Commandsreload cancel

reload inreload in

Syntax Description


Schedule a reload after some timein

Reload after n secondssecs

Command Mode

• /exec

R Commands78

R Commandsreload in

reload modulereload module

Syntax Description


reboot a specific modulemodule

please enter the module numbermodule

Command Mode

• /exec

R Commands79

R Commandsreload module

reload module force-dnldreload module force-dnld

Syntax Description


reboot a specific modulemodule

please enter the module numbermodule

reboot a specific module to force NetBoot and image downloadforce-dnld

Command Mode

• /exec

R Commands80

R Commandsreload module force-dnld

reload non-interruptivereload non-interruptive

Syntax Description


Reboot without interruptionnon-interruptive

Command Mode

• /exec

R Commands81

R Commandsreload non-interruptive

reload power-cyclereload power-cycle

Syntax Description


Power cycle ADMpower-cycle

Command Mode

• /exec

R Commands82

R Commandsreload power-cycle

reload sync-adjacencyreload sync-adjacency

Syntax Description

reload with sync adjacencyreload

Reload with ARP/ND sync adjacencysync-adjacency

Command Mode

• /exec

R Commands83

R Commandsreload sync-adjacency

reload sync-adjacencyreload sync-adjacency

Syntax Description


Reload with sync adjacencysync-adjacency

Command Mode

• /exec

R Commands84

R Commandsreload sync-adjacency

reload timerreload timer

Syntax Description


reboot after a delay secondstimer

delay in secondssecs

Command Mode

• /exec

R Commands85

R Commandsreload timer

reload vdcreload vdc

Syntax Description

Restart the current vdcvdc

Power cyclereload

Command Mode

• /exec

R Commands86

R Commandsreload vdc

reload vdcreload vdc

Syntax Description

Restart the current vdcvdc

Power cyclereload

Enter Virtual Device Context d-vdc

Command Mode

• /exec

R Commands87

R Commandsreload vdc

remark{ [ ] | no } remark

Syntax Description


(Optional) Sequence numberseqno

Access list entry commentremark

Comment, up to 100 characterscomment

Command Mode

• /exec/configure/arpacl /exec/configure/timerange

R Commands88

R Commandsremark


Syntax Description





Command Mode

• /exec/configure/ipacl /exec/configure/ipv6acl

R Commands89

R Commandsremark


Syntax Description





Command Mode

• /exec/configure/macacl

R Commands90

R Commandsremark

remote-as{ remote-as } | { { no | default } remote-as [ ] }

Syntax Description


Inherit values from a peer templatedefault

Specify Autonomous System Number of the neighborremote-as

Autonomous System Numberasn

Command Mode

• /exec/configure/router-bgp/router-bgp-neighbor-sess

R Commands91

R Commandsremote-as

remote-span[no] remote-span

Syntax Description


Enable remote span VLANremote-span

Command Mode

• /exec/configure/vlan

R Commands92

R Commandsremote-span

remoteremote { { ip address { } | hostname } [ port ] [ vrf { | } ] | port | vrf { | } } | no remote { ip address| hostname | port }

Syntax Description


Configure remote machine informationremote

Configure IP featuresip

Configure IP addressaddress

Enter ipv4 address informationipaddress

Configure remote host namehostname

Enter name of the remote hosthost_name

(Optional) Configure remote host tcp portport

(Optional) Configure the host tcp port numberport_no

(Optional) vrf via which the vCenter Server is reachablevrf

(Optional) Specify the vrf-namevrf-name

(Optional) Known VRF namevrf-known-name

Command Mode

• /exec/configure/vmt-conn

R Commands93

R Commandsremote

remove-private-as[ no | default ] remove-private-as [ all | replace-as ]

Syntax Description


(Optional) Inherit values from a peer templatedefault

Remove private AS number from outbound updatesremove-private-as

(Optional) Allall

(Optional) Replacereplace-as

Command Mode

• /exec/configure/router-bgp/router-bgp-neighbor-sess

R Commands94

R Commandsremove-private-as

reoptimize events link-up[no] reoptimize events link-up | no reoptimize timers { delay { cleanup | installation } | frequency } | reoptimizetimers { delay { cleanup | installation } | frequency }

Syntax Description


Reoptimization parametersreoptimize

Reoptimization triggersevents

Reoptimize tunnels on link up eventslink-up

Reoptimization timerstimers

Delay reoptimization actiondelay

Delay cleanup of reoptimized LSPcleanup

seconds to delay cleanup of replaced tunnel LSPclean_sec

Delay replacement of current LSP by reoptimized LSPinstallation

seconds to delay replacement of tunnel LSPinst_sec

Interval between reoptimization scansfrequency

seconds between reoptimizations (0 disables reoptimization)freq_sec

Command Mode

• /exec/configure/te

R Commands95

R Commandsreoptimize events link-up

replay-protection[no] replay-protection

Syntax Description

Enable replay-protection (the default use the no form to disable)replay-protection

Command Mode

• /exec/configure/cts-dot1x /exec/configure/cts-manual

R Commands96

R Commandsreplay-protection

reportreport

Syntax Description

Show trigger reportreport

Command Mode

• /exec/elamns/sel5

R Commands97

R Commandsreport

reportreport [ detail ]

Syntax Description

Show trigger report summaryreport

(Optional) Show detailed trigger reportdetail

Command Mode

• /exec/elamtah/insel6

R Commands98

R Commandsreport


Syntax Description



Command Mode


R Commands99

R Commandsreport


Syntax Description



Command Mode


R Commands100

R Commandsreport


Syntax Description



Command Mode


R Commands101

R Commandsreport


Syntax Description



Command Mode


R Commands102

R Commandsreport


Syntax Description



Command Mode


R Commands103

R Commandsreport


Syntax Description



Command Mode

• /exec/elamtah/outsel0

R Commands104

R Commandsreport


Syntax Description



Command Mode


R Commands105

R Commandsreport


Syntax Description



Command Mode


R Commands106

R Commandsreport

reportreport

Syntax Description


Command Mode


R Commands107

R Commandsreport

reportreport

Syntax Description


Command Mode


R Commands108

R Commandsreport

reportreport

Syntax Description


Command Mode


R Commands109

R Commandsreport

reportreport

Syntax Description


Command Mode


R Commands110

R Commandsreport

reportreport

Syntax Description


Command Mode

• /exec/elamns/outsel0

R Commands111

R Commandsreport

reportreport

Syntax Description


Command Mode


R Commands112

R Commandsreport

request-data-size{ { no | default } request-data-size | request-data-size }

Syntax Description

no

Set a command to its defaultsdefault

Request data sizerequest-data-size

Number of bytes in payloadbytes-in-payload

Command Mode

• /exec/configure/ip-sla/icmpEcho

R Commands113

R Commandsrequest-data-size


Syntax Description

no




Command Mode

• /exec/configure/ip-sla/udp

R Commands114



Syntax Description

no




Command Mode

• /exec/configure/ip-sla/jitter

R Commands115


resequence accessresequence { { access-list } | time-range }

Syntax Description

Resequence a list with sequence numbersresequence

IP/IPv6/MAC/ARPip_ipv6_mac_arp

Resequence an access listaccess-list

Resequence a time-rangetime-range

List namename

Starting sequence numbernumber

Step to increment the sequence numberincrement

Command Mode

• /exec/configure

R Commands116

R Commandsresequence access

resetreset

Syntax Description

Reset Trigger Filtersreset

Command Mode


R Commands117

R Commandsreset

resetreset

Syntax Description


Command Mode


R Commands118

R Commandsreset

resetreset

Syntax Description


Command Mode


R Commands119

R Commandsreset

resetreset

Syntax Description


Command Mode


R Commands120

R Commandsreset

resetreset

Syntax Description


Command Mode


R Commands121

R Commandsreset

resetreset

Syntax Description


Command Mode


R Commands122

R Commandsreset

resetreset

Syntax Description

Reset Trigger conditionsreset

Command Mode


R Commands123

R Commandsreset

resetreset

Syntax Description


Command Mode


R Commands124

R Commandsreset

resetreset

Syntax Description


Command Mode


R Commands125

R Commandsreset

resetreset

Syntax Description


Command Mode


R Commands126

R Commandsreset

resetreset

Syntax Description


Command Mode


R Commands127

R Commandsreset

resetreset

Syntax Description


Command Mode


R Commands128

R Commandsreset

resetreset

Syntax Description


Command Mode


R Commands129

R Commandsreset

resetreset

Syntax Description


Command Mode


R Commands130

R Commandsreset

resetreset

Syntax Description


Command Mode


R Commands131

R Commandsreset

resetreset

Syntax Description


Command Mode


R Commands132

R Commandsreset

restart amtrestart amt

Syntax Description

Manually restart a componentrestart

Restart the AMT multicast routing protocolamt

Command Mode

• /exec

R Commands133

R Commandsrestart amt

restart bgprestart bgp

Syntax Description



Autonomousas

Command Mode

• /exec

R Commands134

R Commandsrestart bgp

restart eigrprestart eigrp

Syntax Description



Process tageigrp-ptag

Command Mode

• /exec

R Commands135

R Commandsrestart eigrp

restart fabric_mcastrestart { fabric_mcast | ngmvpn }

Syntax Description


Restart NGMVPNfabric_mcast

Restart NGMVPNngmvpn

Command Mode

• /exec

R Commands136

R Commandsrestart fabric_mcast

restart igmprestart igmp

Syntax Description


Restart the IGMP multicast routing protocoligmp

Command Mode

• /exec

R Commands137

R Commandsrestart igmp

restart isisrestart isis

Syntax Description


Intermediate System to Intermediate System (IS-IS)isis

Routing process tagtag

Command Mode

• /exec

R Commands138

R Commandsrestart isis

restart msdprestart msdp

Syntax Description


Restart the MSDP multicast routing protocolmsdp

Command Mode

• /exec

R Commands139

R Commandsrestart msdp

restart ospfrestart ospf

Syntax Description



Process tagtag

Command Mode

• /exec

R Commands140

R Commandsrestart ospf

restart ospfv3restart ospfv3

Syntax Description


Open Shortest Path First (OSPF) (Version 3)ospfv3

Process tagtag

Command Mode

• /exec

R Commands141

R Commandsrestart ospfv3

restart otv-isisrestart otv-isis

Syntax Description


Intermediate System to Intermediate System (IS-IS)otv-isis

Routing process tagtag

Command Mode

• /exec

R Commands142

R Commandsrestart otv-isis

restart pimrestart pim

Syntax Description


Restart the PIM multicast routing protocolpim

Command Mode

• /exec

R Commands143

R Commandsrestart pim

restart pim6restart pim6

Syntax Description


Restart the PIM6 multicast routing protocolpim6

Command Mode

• /exec

R Commands144

R Commandsrestart pim6

restart riprestart rip

Syntax Description



Process IDtag

Command Mode

• /exec

R Commands145

R Commandsrestart rip

restart rsvprestart rsvp

Syntax Description

Manually restart a processrestart

RSVP processrsvp

Command Mode

• /exec

R Commands146

R Commandsrestart rsvp

resync-databaseresync-database

Syntax Description

Re-synchronize switch-profile databaseresync-database

Command Mode

• /exec/configure

R Commands147

R Commandsresync-database

retain route-target all[no] retain route-target { all | route-map }

Syntax Description


Retain the routes based on Target VPN Extended Communitiesretain

Specify Target VPN Extended Communitiesroute-target

All the routes regardless of Target-VPN communityall

Apply route-map to filter routesroute-map


Command Mode

• /exec/configure/router-bgp/router-bgp-af-l2vpn-vpls

R Commands148

R Commandsretain route-target all

retain route-target all[no] retain route-target { all | route-map }

Syntax Description


Retain the routes based on Target VPN Extended Communitiesretain


All the routes regardless of Target-VPN communityall

Apply route-map to filter routesroute-map


Command Mode

• /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6/exec/configure/router-bgp/router-bgp-af-link-state /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn/exec/configure/router-bgp/router-bgp-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-af-ipv6-mvpn

R Commands149

R Commandsretain route-target all

retransmit-interval{ { retransmit-interval } | { no retransmit-interval [ ] } }

Syntax Description


Packet retransmission intervalretransmit-interval

(seconds)interval

Command Mode

• /exec/configure/router-ospf/router-ospf-vlink /exec/configure/router-ospf/vrf/router-ospf-vlink

R Commands150

R Commandsretransmit-interval


Syntax Description



(seconds)interval

Command Mode

• /exec/configure/router-ospf3/router-ospf3-vlink /exec/configure/router-ospf3/vrf/router-ospf3-vlink

R Commands151



Syntax Description



(seconds)interval

Command Mode

• /exec/configure/router-ospf/vrf/router-ospf-slink

R Commands152


revisionrevision | no revision [ ]

Syntax Description


Set configuration revision numberrevision

Configuration revision numberrev-id

Command Mode

• /exec/configure/spanning-tree/mst/configuration

R Commands153

R Commandsrevision

revocation-check crl[no] revocation-check { crl [ none ] | none }

Syntax Description


Configure trustpoint revocation check methodsrevocation-check

Configure revocation check using crlcrl

(Optional) Configure revocation check using nonenone

Configure revocation check using nonenone

Command Mode

• /exec/configure/trustpoint

R Commands154

R Commandsrevocation-check crl

rewrite-evpn-rt-asn[ no | default ] rewrite-evpn-rt-asn

Syntax Description



Auto generate RTs for EBGP neighborrewrite-evpn-rt-asn

Command Mode

• /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn

R Commands155

R Commandsrewrite-evpn-rt-asn

rewrite-rt-asn[ no | default ] rewrite-rt-asn

Syntax Description



Auto generate RTs for EBGP neighborrewrite-rt-asn

Command Mode

• /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn

R Commands156

R Commandsrewrite-rt-asn

rfc1583compatibility[no] rfc1583compatibility

Syntax Description


Configure 1583 compatibility for external path preferencesrfc1583compatibility

Command Mode


R Commands157

R Commandsrfc1583compatibility

rip shutdown[no] rip shutdown

Syntax Description


RIP configuration commandsrip

Shutdown RIP on this interfaceshutdown

Command Mode

• /exec/configure/if-igp

R Commands158

R Commandsrip shutdown

rmdirrmdir { | }

Syntax Description

Delete a directoryrmdir

Delete a directoryuri0

Delete a directory on expansion flashuri1

Command Mode

• /exec

R Commands159

R Commandsrmdir

rmon alarm absolute rising-threshold falling-thresholdrmon alarm { absolute | delta } rising-threshold [ ] falling-threshold [ ][ owner ] | no rmon alarm

Syntax Description


Remote Monitoringrmon

Configure an RMON alarmalarm

Alarm numberi0

MIB object to monitors0

Sample intervali1

Test each sample directlyabsolute

Test delta between samplesdelta

Configure the rising thresholdrising-threshold

Rising threshold valuei2

(Optional) Event to fire on rising threshold crossingi3

Configure the falling thresholdfalling-threshold

Falling threshold valuei4

(Optional) Event to fire on falling threshold crossingi5

(Optional) Specify an owner for the alarmowner

(Optional) Alarm owners1

Command Mode

• /exec/configure

R Commands160

R Commandsrmon alarm absolute rising-threshold falling-threshold

rmon eventrmon event [ log ] [ trap ] [ description ] [ owner ] | no rmon event

Syntax Description



Configure an RMON eventevent

Event numberi0

(Optional) Generate RMON log when the event fireslog

(Optional) Generate SNMP trap when event firestrap

(Optional) SNMP community strings0

(Optional) Specify a description of the eventdescription

(Optional) Event descriptions1

(Optional) Specify an owner for the eventowner

(Optional) Event owners2

Command Mode

• /exec/configure

R Commands161

R Commandsrmon event

rmon hcalarm absolute startupalarm rising-thresholdfalling-threshold owner

rmon hcalarm { absolute | delta } startupalarm rising-threshold falling-threshold owner | no rmon hcalarm

Syntax Description



Configure an High Capacity RMON alarmhcalarm

Alarm numberi0

MIB object to monitors0

Sample intervali1

Test each sample directlyabsolute

Test delta between samplesdelta

Configure alarm typestartupalarm

Startup alarm type, rising(1) falling(2) risingorfalling(3)i2

Configure the rising thresholdrising-threshold

Rising threshold value in bytesi3

Event to fire on rising threshold crossingi4

Configure the falling thresholdfalling-threshold

Falling threshold value in bytesi5

Event to fire on falling threshold crossingi6

Specify an owner for the alarmowner

Alarm owners1

Command Mode

• /exec/configure

R Commands162

R Commandsrmon hcalarm absolute startupalarm rising-threshold falling-threshold owner

roaming-eid-prefix{ [ no ] roaming-eid-prefix { | } }

Syntax Description


Configures what EID-prefixes allowed to roamroaming-eid-prefix

IPv4 roaming EID-prefixeid-prefix

Command Mode


R Commands163

R Commandsroaming-eid-prefix

role feature-group name[no] role feature-group name

Syntax Description


Configure rolesrole

Configure role feature-groupfeature-group

Feature-group namename

Enter feature-group namearg6

Command Mode

• /exec/configure

R Commands164

R Commandsrole feature-group name

role name[no] role name

Syntax Description


Configure rolesrole

Enter the role namename

Enter the role namearg2

Command Mode

• /exec/configure

R Commands165

R Commandsrole name

role priorityrole priority | no role priority

Syntax Description


Role related configurationrole

Configure priority to be used during vPC role (primary/secondary)election

priority

specify priority valuepriority_value

Command Mode

• /exec/configure/vpc-domain

R Commands166

R Commandsrole priority

rollback running-config checkpointrollback running-config { checkpoint | file } [ best-effort | stop-at-first-failure |atomic ] [ verbose ]

Syntax Description

Rollback configurationrollback

Rollback running configurationrunning-config

Rollback running configuration to checkpointcheckpoint

Checkpoint namechkpoint_name

Rollback running configuration to configuration filefile

Checkpoint file pathfile_uri

(Optional) Skip errors and proceed with rollbackbest-effort

(Optional) Stop rollback at the first errorstop-at-first-failure

(Optional) Stop rollback and revert to original configuration (default)atomic

(Optional) Show the execution logverbose

Command Mode

• /exec

R Commands167

R Commandsrollback running-config checkpoint

root-priority[no] root-priority

Syntax Description


Set priority with which nodes becomes rootroot-priority

Root priority value per topologyroot-pri

Command Mode

• /exec/configure/l2mp-isis/l2mp-isis-vrf-common /exec/configure/l2mp-isis/l2mp-isis-l2-topo

R Commands168

R Commandsroot-priority

route-maproute-map [ permit | deny ]

Syntax Description

Create route-map or enter route-map command moderoute-map

Route-map namertmap-name

(Optional) Route map permits set operationspermit

(Optional) Route map denies set operationsdeny

Sequence to insert to/delete from existing route-map entryseq

Command Mode

• /exec/configure

R Commands169

R Commandsroute-map

route-maproute-map [ permit | deny ]

Syntax Description





Command Mode

• /exec/configure

R Commands170

R Commandsroute-map

route-map[no] route-map { | } [ permit | deny ]

Syntax Description




Known route-map namertmap-name



Command Mode

• /exec/configure

R Commands171

R Commandsroute-map

route-map[no] route-map { | } [ permit | deny ]

Syntax Description




Known route-map namertmap-name



Sequence to insert to/delete from existing route-map entryseq

Command Mode

• /exec/configure

R Commands172

R Commandsroute-map

route-map out[ no | default ] route-map { out | in }

Syntax Description



Apply route-map to neighborroute-map


Apply policy to outgoing routesout

Apply policy to incoming routesin

Command Mode

• /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

R Commands173

R Commandsroute-map out

route-map pbr-statisticsroute-map pbr-statistics | no route-map { | }pbr-statistics

Syntax Description



Route-map nameroute-map-name

Route-map nameroute-map-name

Known route-map nameroute-map-name

Statistics for policy based routingpbr-statistics

Command Mode

• /exec/configure

R Commands174

R Commandsroute-map pbr-statistics

route-reflector-client[ no | default ] route-reflector-client

Syntax Description



Configure a neighbor as Route reflector clientroute-reflector-client

Command Mode

• /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls

R Commands175

R Commandsroute-reflector-client

route-reflector-client[ no | default ] route-reflector-client

Syntax Description



Configure a neighbor as Route reflector clientroute-reflector-client

Command Mode

• /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-link-state/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

R Commands176

R Commandsroute-reflector-client

route-target both{ route-target both { | } } | { no route-target both { | } }

Syntax Description



Export and Import Target-VPN communityboth

RT extcommunity in aa4:nn or ip:nn formatext-comm-rt-aa4nn2

RT extcommunity in aa:nn formatext-comm-rt-aa2nn4

Command Mode

• /exec/configure/evpn/evi-sr

R Commands177

R Commandsroute-target both

route-target both auto{ route-target both { auto | | } } | { no route-target both { auto| | } }

Syntax Description



Generate RT automaticallyauto

Export and Import Target-VPN communityboth

RT extcommunity in aa4:nn or ip:nn formatext-comm-rt-aa4nn2

RT extcommunity in aa:nn formatext-comm-rt-aa2nn4

Command Mode

• /exec/configure/evpn/evi

R Commands178

R Commandsroute-target both auto

route-target both auto{ route-target both { auto | | } [ evpn | mvpn ] } | { no route-targetboth [ auto [ evpn | mvpn ] | [ evpn | mvpn ] | [ evpn | mvpn] ] }

Syntax Description



Export And Import Target-VPN communityboth

Generate route target automaticallyauto

(Optional) Specify Target for EVPN routesevpn

rcommands...drop-prob2 (optional)dropprobabilityvalue weight2 (optional)queuelengthweight weight2...

Documents