ratnagiri gas and power pvt. ltd, - gail (india) … with door frame, all finishing, removing any...

RATNAGIRI GAS AND POWER PVT. LTD,

LNG TERMINAL PROJECT RATNAGIRI

TECHNICAL ADDENDUM NO. 1

TO

BIDDING DOCUMENT FOR

COMPLETION OF BALANCE CIVIL,ARCHTECTURAL, MECHANICAL, ELECTRICAL AND

INSTRUMENTATION WORKS (BIDDING DOCUMENT NO.: 6724/T-005/07-08/AKC/17)

GAIL (INDIA) LIMITED (Owner’s Engineer)

Prepared & Issued by:

Regd. Office : Engineers India Bhawan, 1, Bhikaiji Cama Place, New Delhi - 110066

Sl. No……

TECHNICAL ADDENDUM NO. 1

TO

BIDDING DOCUMENT

FOR COMPLETION OF BALANCE CIVIL,ARCHTECTURAL,

MECHANICAL, ELECTRICAL AND INSTRUMENTATION WORKS

(BIDDING DOCUMENT NO.: 6724/T-005/07-08/AKC/17)

INDEX

Title Document No./Drg. No. Rev. No.

CIVIL WORKS(MARINE) - Addendum-1 6724-00-16-56-ADD1-0016 0 -Price Schedule(Revised) 6724-00-16-56-SOR-0016 1 -Scope of Work(Revised) 6724-00-16-56-DOC-0016 1 MECHANICAL -Addendum-1 to Scope of Packaged Equipment Works

6724-00-16-44-AD1-SP-0020 0

-Price Schedule ( Revised ) 6724-00-16-44SOR-0020 1 ELECTRICAL -Addendum 6724-ELECT-AD-01 - -Price Schedule(Revised) 6724-00-16-50-SOR-0020 2

PROJECT : RGPPL LNG TERMINAL PROJECT CLIENT : GAIL INDIA LTD. PART-B

NAME OF BIDDER: M/S DOC NO. 6724-00-16-56-SOR-0015 (Rev.0)

IN FIG IN WORDSPART- A : CIVIL WORKS

1 Installation of the Access frames on the intermediatewalkway supporting dolphins WD1, WD2, and WD3 &WD4 as per the details shown in the drawing (Accessframes are the interconnection of the walkways to beinstalled on the intermediate walkway supporting dolphinsWD1, WD2, WD3 & WD4: ( Refer drawing no. WDT 106Rev A & Annexure-1) including transportation of the samefrom the construction jetty, welding, bolting, touch uppainting as required, mobilisation of all labour, tools,tackles, equipments, scaffolding etc all complete anddemobilisation of the same after completion of the woksetc all complete. (Fabricated & painted access frames ofapproximate size 1m x 1m x 1m height and approximateweight of 150kg are available at site and the same will beissued free to the contractor for installation.)

NUMBER 4 0

PRICE SCHEDULE NAME OF WORKS: COMPLETION OF BALANCE CIVIL, ARCHITECTURAL, MECHANICAL AND ELECTRICAL WORKS

RATE (In Rupees) AMOUNT (In Rupees)

BIDDING DOC. NO.: 6724/T-005/07-08/AKC/17(CIVIL -- NON MARINE)

UNIT QTYSL.NO

ITEM DESCRIPTION

R-SOR2_Civil (Non-mar).xls PART-B:SOR:Page-1 of 12

IN FIG IN WORDS


UNIT QTYSL.NO

ITEM DESCRIPTION

Supply, fabrication and fixing of tubular hand rail on thetrestle, jetty head and dolphins as per the scope of worksand drawings attached, including galvanising, supply of allmaterial, making pockets / anchor fasteners, providing non-shrink grout as required, mobilisation of labour, tools,tackles, equipments, scaffolding, etc and de mobilisation ofthe same after completion of the works etc. all complete.

a) For Approach Trestle & Jetty head M 150 0

b) For Berthing dolphins, Mooring dolphins &Intermediate walkway supporting dolphins.

M 250 0

Installation and placing of safety chains at the jetty headand dolphins as per the drawings including, anchorfasteners for fixing the plate, transportation to site,mobilization of labour, tool, tackles, equipments,scaffolding, etc and de-mobilisation of the same aftercompletion of the works etc. all complete. (Safety chainswill be issued free to the contractor for installation)

a) For Jetty Head. NUMBER 7 0


NUMBER 29 0

2

3


IN FIG IN WORDS


UNIT QTYSL.NO

ITEM DESCRIPTION

Supply, fabrication, installation and placing of safetychains at the jetty head as per the drawings includingsupply of all material, anchor fasteners for fixing the plate,mobilization of labour, tool, tackles, equipments,scaffolding, etc an de mobilisation of the same aftercompletion of the works etc. all complete. (Safety chainsare approximately 14.5m long. Details as per drawing no.WDT105)

a) For Berthing dolphins, Mooring dolphins &Intermediate walkway supporting dolphins.

NUMBER 19 0

5 Supply and providing Reinforced cement concrete of gradeM30 for the steps on the Jetty head and walkways andother minor works as required including applying epoxypaint for proper bond of the old concrete to the newconcrete, supply of all material, labour, form work,scaffolding, tools tackles, equipments, curing etc allcomplete.

M3 2 0

4


IN FIG IN WORDS


UNIT QTYSL.NO

ITEM DESCRIPTION

Supply and placing in position high strength deformedsteel bars reinforcement (corrosion resistant conforming toIS: 1786 grade Fe415) for RCC works where ever requiredincluding transporting the steel, straightening, cleaning,decoiling, cutting, bending to the required shape, bindingwith 16SWG black soft annealed wire at every intersection,supplying and placing with proper cover blocks, supportschairs, overlaps etc including supply of all material,mobilisation of all labour, tools, tackles, equipments,scaffolding etc. all complete.

MT 0.5 0

Supply and fabrication of the structural steel items foradditional steel works for the stair cases and stair casesupports as required, ‘gap closer’ handrails, steel works forthe supports of access frames, plates, bolts, nuts, washers,connecting bolts and stiffeners for the safety chains andany other structural steel items to be fabricated forcompletion of the job including welding, bolting,painting/galvanising as required, mobilisation of labour,tool tackles, equipments etc all complete.

MT 3 0

6

7


IN FIG IN WORDS


UNIT QTYSL.NO

ITEM DESCRIPTION

8 Installation of the stair cases from the jetty head to berthingdolphins BD2 & BD3, including transportation of the stairsfrom the construction jetty to the jetty head, drilling inconcrete if required, welding, bolting, fixing of thesupports for the stair cases at the jetty head and dolphinsetc , mobilisation of labour, tools, tackles, equipments,scaffolding, cranes as required etc and demobilisation ofthe same after completion of the works etc all complete.(Refer drawing no. JTH102 Rev-B)

NUMBER

2 0

Supply, fabrication and installation of balance steel gratingfor the walkways and for the access frames (Access framesare the interconnection of the walkways on theintermediate walkway supporting dolphins WD1, WD2,WD3 & WD4 as per drawing no.) including supply of allmaterial, welding, galvanizing, mobilisation of labour,tools, tackles, equipments, scaffolding etc and removal ofthe same after completion of the works etc. all complete.

M2 40 09


IN FIG IN WORDS


UNIT QTYSL.NO

ITEM DESCRIPTION

10 Removal of all temporary steel works such as temporarybrackets, handrails including damaged handrails etc on theapproach trestle, jetty head, berthing dolphins, mooringdolphins, intermediate walkway supporting dolphins, etc.including mobilisation of all labour, tools, tackles, cranes,trucks etc and disposal of the same as per the direction ofEngineer in charge de mobilisation of the same aftercompletion of the job etc. all complete.

MT 2 0

PART B: ARCHITECTURAL WORKS

1 Providing and fixing TAC approved Fire Check Door of 60 minutes rating (Opening size 900mm x 2100mm) including stainless steel double riveted frame (16 gauze), 45mm thick fully insulated, asbestos free shutter of 18gauze stainless steel, double riveted facing, conforming to BS-476, part 20,22, IS-3614, part 2, ISO-834 including all hard ware, stainless steel decorative handles, latch/lock panic bar etc. all complete. (“NAVAIR” or approved equivalent make)

Nos. 6 0


IN FIG IN WORDS


UNIT QTYSL.NO

ITEM DESCRIPTION

2 Providing and fixing overall 35mm thick, panelled door shutter (for opening size 800mm x 2100mm as per EIL standard no. 7-75-0066) consisting of 100mm wide second class teakwood stiles and top rails and 150 mm wide lock and 200mm wide bottom rails jointed suitably and 12mm thick Teakwood Particle Board infill panels fixed with 12.5mm square moulded teakwood beading fixed by approved quality neoperene based adhesive and nailing @ max. 300mm c/c including painting the stiles, rails and panel board with two coats of approved shade and quality (ICI or equivalent) synthetic enamel paint over and including approved coat of primer, providing and fixing 11.10mm dia, 150mm long Aluminium butt hinges (max. vertical spacing not exceeding 600mm) for each shutter, fixing with door frame, all finishing, removing any stain etc.; shutter fixed to and including providing and fixing second class teakwood (conforming to IS: 4021) frames (of finished overall size 125 mm x 65 mm) including cutting, shaping, jointing, applying a coat of bituminous paint on concealed surface, wood primer on exposed surface, fixing i

Nos. 1 0


IN FIG IN WORDS


UNIT QTYSL.NO

ITEM DESCRIPTION

by means of 300mm x25mm x6mm thick hold fasts screwed to frame @ 600mm max vertically and grouted with M�15 grade concrete in min. 350mm x 100mm x 100mm sized hole made in masonry/96mm long, 12mm dia M.S. dash fastener, painting with two coats of approved shade and make (ICI or equivalent) synthetic enamel paint over approved quality primer coat, finishing etc. all complete. The item also includes providing and fixing (with brass screws) in position approved make and quality door fittings, fixtures and accessories like pressure die cast zinc alloy, chromium plated door handles 150mm long (2 nos on each door, one on either side), 3mm thick plastic kick/push plate (200 mm wide continuous at bottom of thehat hook etc. complete.

3 Supplying and fixing fully glazed electrostatic powdercoated (25 micron, approved shade) aluminium fixed typewindows/ ventilators etc. including frame with INDAL/JINDAL/ approved make extruded tubular aluminiumheavy duty sections, all complete with 8.38 mm laminatedsafety glass (made of two glass panes one layers ofpolyvinyl butyral (PVB) sandwiched between them andtreated); glass fixed with rubber lining and powder coatedaluminium beading including fixing the frame to masonry/RCC by counter sunk 100mm long brass screw and dashfastener to M-20 grade concrete in minimum 150mm x150mm x 50mm sized block (for brick masonry only)/RCC, finishing, making good of any damaged work etc. allcomplete.

Sq. M 10 0


IN FIG IN WORDS


UNIT QTYSL.NO

ITEM DESCRIPTION

Fixing in position the false flooring metal framework inposition (supplied by the owner) consisting of consisting ofpedestal supports made of galvanised M.S. base plate fullywelded to Galvanised M.S. threaded stud; topheadattachments having checknuts movable up and down toprovide level adjustment, the pedestals with base platesbeing fixed on floor @ 610mm c/c both ways by 6mm diax 40mm long M.S. dash fasteners; galvanised machine cutcold rolled M.S. channels snapped on to the top-headattachments in both directions to form a grid work of610mmx 610mm all complete.

0

Providing and fixing in position false flooring removablepanels (on metal framework) consisting of 35mm thick un-veneered wooden particle board (3 layer flat pressed,bonded with phenol formaldehyde synthetic resinconforming to IS : 848, BWP type, categorised as Class-1for ‘surfaces of very low flame spread as per IS: 1642-1960) conforming to IS: 3087, finished underneath with0.05mm thick Aluminium foil turned up and extended byminimum 12mm along the panel perimeter , finished alongall four edges of panel with hard PVC lipping, includingproviding and fixing 12mm x 12mm x 75mm long 2mmthick aluminium channel cleats at the bottom of the panelsnear the center of each of the four edges, includingproviding and fixing all accessories like screws, bolts,adhesive etc.

0

5

Sq. M

4 Sq. M

105


IN FIG IN WORDS


UNIT QTYSL.NO

ITEM DESCRIPTION

Providing and fixing in position (over false floor panels-existing and new ones) with 2mm thickantistatic type PVCtiles conforming to BS - 2050, table-2 and IS-3462/3461including removing soiled/ damaged PVC finish onexisting, cleaning the same with vigorous sandpaperingetc. all complete.

0

7 Providing and applying two coats of plastic emulsion paintconforming to IS: 5411 of approved shade includingcleaning and preparation of surfaces (stopping all holes anddepressions with plaster of paris, sand papering etc.) allcomplete.

Sq.M 120 0

Providing & applying 2 coats of waterproof decorativecement paint finished to approved make and approvedshade, cleaning, including preparation of surfaces, curingetc. all complete.

0

6 Sq. M 40

8 Sq. M 400


IN FIG IN WORDS


UNIT QTYSL.NO

ITEM DESCRIPTION

Providing and fixing white glazed Earthen ware doubletrap, syphonic pattern wash down water closet conformingto IS: 2556 Part II including white plastic solid seat andcover conforming to IS: 2548, CP brass hinges and rubberbuffers,10 litres capacity glazed earthenware low levelcistern conforming to IS:774 with internal overflow system& fittings, CP brass 40mm dia flush pipe,15 mm dia,450mm long PVC connection pipe, ball valve, painting ofall exposed metallic surfaces with 2 coats of approvedshade and quality synthetic enamel paint (ICI or approvedequivalent) over a priming coat of approved quality redoxide zinc chromate, cutting walls, floors and making goodof same, making inlet and outlet connections, finishingetc., also including providing necessary fixtures/accessories like 1 no. each (15 mm dia) heavy grade bibcock (in the wall at approved location) and stop cocks (asrequired) of spring loaded self closing type conforming toIS : 781, CP Brass Toilet paper holder of approved makewith CP brass brackets including fixing to wall withwooden cleats, CP brass screws, cutting walls and making g

Nos 1 0

finishing etc. all complete.

9


IN FIG IN WORDS


UNIT QTYSL.NO

ITEM DESCRIPTION

10 Providing and fixing white glazed Earthenware HandWash Basin with anti-splash rims on 3 sides, of 550mm x400mm size conforming to IS : 2556 Part�IV, includingapproved M.S./C.I. brackets conforming to IS : 775, one15mm dia CP brass pillar cock, rubber plug with CP brasschain,32mm CP Waste fitting of standard pattern pipe with32mm dia GI pipe, C.P. brass bottle trap, cutting walls,floors and making good the same, painting all exposedmetallic surfaces with 2 coats of approved shade andquality synthetic enamel paint (ICI or approved equivalent)over an approved quality priming coat of red oxide zincchromate making all connections, finishing etc.; alsoincluding providing and fixing fixtures and accessories like15 mm dia stop cock of spring loaded self closing typeconforming to IS: 781, round edged mirror of 5.5mm thick(600 x 450mm) glass with 6mm thick A.C. sheet backingand bevelled edging, fixed on wall with wooden cleats andCP brass screws, 600mm x 120mm x 4mm thick Glassshelf of approved quality with CP brass bracket and guardrails, approved quality chromium plated liquid soap contain

Nos. 1 0

C.P.Brass towel rail 600mm long; all accessories includingfixing to wall with wooden cleats and CP brass screws,cutting walls and making good the same, finishing etc. allcomplete.

SUBTOTAL (PART-B) 0



IN WORDS

IN FIGURES

1 Touch up painting to the structural steel items of the interconnecting walkwaysat the jetty head, access frames (interconnection of walkways on theintermediate supports WD1, WD2, WD3&WD4), stair cases etc. as per thespecification, including preparation of the surface, removal of corrosion, supplyof all material, mobilisation of labour, tools, tackles, all equipments, scaffoldingetc and demobilisation of the same after completion of the works etc allcomplete

M2 50 0

Supply, fabrication and fixing of tubular hand rail on the navigational dolphinsas per the scope of works and drawings attached, including galvanising, removal of old damaged hand rails, supply of all material, making pockets / anchorfasteners, providing non-shrink grout as required, mobilisation of labour, tools,tackles, equipments, Marine spreads as required, scaffolding, etc and demobilisation of the same after completion of the works etc. all complete.

a) Navigational dolphins M 35 0

UNIT QUANTITY

2

RATE AMOUNT

NAME OF WORKS: SCOPE OF WORK FOR INSTALLATION RELATED MARINE WORKS INCLUDING CELL FENDER INSTALLATION

AT RGPPL LNG TERMINAL

SL.NO ITEM DESCRIPTION

PROJECT : RGPPL LNG TERMINAL PROJECT (CLIENT : GAIL INDIA LTD.)

PRICE SCHEDULE

a) For Navigational dolphins ND1, ND2 & ND4. NUMBER 3 0

4 Supply and fabrication of the structural steel items for the clamps on piles,ladders, and other structural steel support members for the additional ladder andtimber fender system if required, at the jetty head and dolphins, (in case there isshortage of clamps, ladders and associated steel works for the ladder & timberfender system), minor platform on the navigational dolphin no. ND4 (Refer Drgno. NDT004- Rev A), plates, bolts, nuts, washers and any other structural itemsto be fabricated for completion of the job including welding, bolting, paintingmobilisation of labour, tool tackles, equipments etc all complete.

MT 3 0

5 Supply, fabrication and installation of steel grating for the minor platform ofND4 including supply of all material, welding, galvanizing, transporting, lifting,mobilisation of labour, tools, tackles, equipments, Marine spreads as required,scaffolding etc and removal of the same after completion of the works etc. allcomplete. (as per drawing no. NDT001-Rev C)

M2 10 0

6 Supply of timber fenders of size and details as per the drawings for the ladderand fender system on the Jetty Head, Berthing dolphins, Mooring dolphins andNavigational dolphins, including transportation to site, labour, cranes,Equipments, Marines spreads, divers etc all complete.

M3 30 0

Installation of safety chains on the navigational dolphins as per the drawings including, anchor fasteners for fixing the plate, mobilization of labour, tool, tackles, equipments, Marine spreads as required scaffolding, etc and de mobilisation of the same after completion o the works etc. all complete. (Safety chains will be issued free to the contractor for installation)

3

Installation of ladder, timber fender, mooring rings and all associated items asper the drawings, including transportation all material from the constructionjetty, assembling, touch up painting as required, fixing clamps on the piles,fixing anchor fasteners, plates etc as required, mobilisation of labour, tools,tackles, equipments, scaffolding, cranes, Marine spreads, divers etc anddemobilisation of the same after completion of the works etc all complete. (Pileclamps, ladders, steel beams that are available at site will issued free to thecontractor. Refer Clause no. 5.1.2 in the scope of work document)

a) Jetty Head SETS 4 0

(Each set consisting of 1 Ladder & 4-timber fender system as per drawing no.JTH104-Rev B & GEG006 –Rev D)

b) Berthing & Mooring dolphins SETS 8 0

(Each set consisting of 1 Ladder & 2 timber fender system as per drawing no.MDT004 for Mooring dolphins & as per drg no. BDC001, 002,003&004 forBerthing dolphins – ie one set per dolphin)

c) Navigational dolphins ND1 & ND2 SETS 2 0

(Each set consisting of 1 Ladder, 2 timber fender system as per drawing no.NDC001 (Rev C). ie one set each for ND1&ND2.)

d) Navigational dolphin ND4 SETS 1 0

(1 set consisting of 1Ladder, 2-timber fender system as per drawing no.NDT001-Rev C).

8 Removal of all temporary steel works such as temporary platforms, brackets,

walkways, handrails etc on the approach trestle, jetty head, berthing dolphins,mooring dolphins, intermediate walkway supports, navigational dolphins etc.including mobilisation of all labour, tools, tackles, cranes, scaffolding etc andde mobilisation of the same after completion of the job etc. all complete.

MT 5 0

BRIDGESTONE FENDER INSTALLATION

7

0

10 Fixing of frontal pads on the existing frontal frame on the berthing dolphinBD3, fixing bolts, washers, including all labour, tools, tackles, scaffolding,equipments, Marine spreads etc and de-mobilisation of the same aftercompletion of the job, all complete

NUMBER

72 0

11 Removal, refixing and realignment of the frontal frame on the berthing dolphinBD3 for installation of the new fender and fixing of the frontal pads includingall labour, tools, tackles, equipments, crane, marine spread etc and demobilisation of the same after completion of the job, all complete.

(The contractor shall carry out the work as per the instruction of theManufacturer’s (Bridgestone) representative and Engineer in charge.)

Ref: Drg no. BDC 003 (Rev C) and Annexures No.1 & 2

9 Installation and fixing of Bridgestone Fender SUC1600H (RE+10) in place ofthe damaged bottom fender at the berthing dolphin BD3, including removal ofthe damaged fender & handing over of the same as per the instruction ofEngineer, placing and fixing of new anchor bolts, washers etc for fixing of thenew fender and all associated works, removal of damaged existing bolts,transportation of the new Fender to the site, mobilisation of all labour, tools,tackles, scaffolding, marines spreads, cranes, all installation aids, de-mobilisation of the same after completion of the job, disposal of the damagedfender etc as per the scope of works, all complete. (New fender SUC1600H-RE+10 along with Anchor bolts & washers will be issued free to the contractor.The contractor shall carry out the installation activities as per the instruction ofthe Manufacturer’s ( Bridgestone) representative and Engineer in charge.)

NUMBER 1

0NUMBER 1

(Frontal pads, fixing bolts& washers will be issued free to the contractor. The contractor shall carry out the pad fixing activities as per the instruction of the Manufacturer’s (Bridgestone) representative and Engineer in charge.)


IN WORDS IN FIGURESELECTRICAL WORKSNote:- All supply material/equipment shall be seaworthy and suitable for installation on a jetty.Contractor to note that all installation works areto be carried on jetty and necessary equipmentincluding safety equipment as required forinstallation works shall be in Contractor’s scope.Make of all supply items shall be subject toEIL/owner approval.

1 Testing and commissioning of existing 415V LS 1switchboard 100 LSW 998 of Merlin Gerin makeincluding rectification/modification works fornecessary cable termination for incoming andoutgoing cables including supply of cable glandsand lugs(as applicable), operating handles/switches and any other rectification/modificationworks as required including necessarycoordination with supplier(if required), supply ofmaterial as required for completion, labour, so asto make the panel operational under thedirections of Engineer-in-Charge.

2 Supply of flameproof flood light fixtures suitablefor gas group IIA,IIB and Temp.Cl.T3 andsuitable for following wattage and lampincluding all mounting accessories as required formounting on existing flood light poles along withinternal associated control gear box, FLP cableglands as required for cable entry but excludinglamps as per enclosed specifications,layoutdrgs.,approved drawings and directions ofEngineer-in-Charge.

(a) 400W HPSV (SON T) Nos. 11(b) 150W HPSV Nos 24

NAME OF WORKS: COMPLETION OF BALANCE ELECTRICAL WORKS OF THE JETTY AT RGPPL LNG TERMINAL

PRICE SCHEDULE

ITEM DESCRIPTIONSL.NO AMOUNTRATEQUANTITYUNIT

PAGE 1 OF 9


IN WORDS IN FIGURES


PRICE SCHEDULE


3 Supply of flameproof bulkhead lighting fixtures Nos. 114suitable for 60W(GLS) lamp suitable for gasgroup IIA,IIB and Temp.Cl.T3 including allmounting accessories as required for mounting onhand rail supported pipes along with FLP cablegland as required for cable entry but excludinglamps as per enclosed specifications,layoutdrgs.,approved drawings and directions ofEngineer-in-Charge.

4 Supply of 60W GLS lamps for item no.3.0 as per Nos. 114enclosed specifications,layout drgs. anddirections of Engineer-in-Charge.

5 Installation of 400W HPSV Flameproof flood Nos. 11light fixtures along with associated control gearbox on 20M & 16M high flood light polesincluding all cable terminations, supply & layingof internal wiring as required, labour, material asrequired, transportation as per specifications,layout drgs. and directions of Engineer-in-Charge.

6 Installation of 150W HPSV Flameproof flood Nos. 24light fixtures along with associated control gearbox on 6M high flood light poles including allcable terminations, supply & laying of internalwiring as required, labour, material as required,transportation as per specifications,layout drgs.and directions of Engineer-in-Charge.

PAGE 2 OF 9


IN WORDS IN FIGURES


PRICE SCHEDULE


7 Installation of flameproof bulkhead lighting Nos. 114fixtures suitable for 60W(GLS) lamp suitable forgas group IIA,IIB and Temp.Cl.T3 including allmounting accessories as required for mounting onhand rail supported pipes including supply of 1Mhigh Pipes to be supported on handrails alongwith internal cabling as required from FLPjunction boxes up to lighting fixtures, cableterminations,labour,material as required,transportation as per enclosed specifications,layout drgs.and directions of Engineer-in-Charge.

8 Installation of 6M high flood light pole including Nos. 8touch up paint, rectification of minor defect dueto storage for long time, all labour, material,transportation as per enclosed specifications,layout drgs.and directions of Engineer-in-charge

9 Installation of 20M high flood light pole Nos. 1including touch up paint, rectification of minordefect due to storage for long time, all labour,material, transportation as per enclosedspecifications, layout drgs.and directions ofEngineer-in-charge.

10 Supply of flameproof junction boxes(to be used Nos. 57for circuit wiring of FLP bulkhead light fittingsalong walkways) suitable for gas group IIA/IIBand temp.Cl.T3 along with 4 nos,cable entriesand 4 nos.FLP double compression cable glandsand FLP plugs(to block unused entries) asrequired suitable for wiring 4Cx4mm.sq.YWYcable(Exact cable size to be decided byContrcator during execution) including alllabour,materials as per specifications of thistender,approved drgs.and direction of Engineer-in-Charge.

PAGE 3 OF 9


IN WORDS IN FIGURES


PRICE SCHEDULE


11 Installation of FLP junction boxes on handrails Nos. 57along the walkway including all cableterminations, labour,material,transportation as perspecifications,layout drgs,and directions ofEngineer-in-Charge.

12 Supply of flameproof junction boxes(to be used Nos. 12for circuit wiring of FLP flood light poles ondolphins)suitable for gas group IIA/IIB andtemp.Cl.T3 along with double pole MCBs forindividual flood lights,5 nos.(max.)cable entries,FLP double compression cable glands,terminations, FLP plugs for unsued entries asrequired suitable for wiring 4Cx4mm.sq.YWYcable(Exact cable size to be decided byContrcator during execution) including alllabour,materials as per specifications of thistender,approved drgs.and direction of Engineer-in-Charge.

13 Installation of FLP junction boxes at Sl.no.12.0 at Nos. 12entrance of each dolphin including, labour,material, transportation as perspecifications,layout drgs,and directions ofEngineer-in-Charge.

14 Supply of flameproof 32A TPN isolating Nos. 12switches in flameproof enclosure suitable for gasgroup IIA,IIB and Temp.Cl.T3 at the entrance ofwalkways for individual lighting circuits alongwith FLP double compression cable glands forincoming & outgoing cables of size4Cx4mm.sq(YWY)(Exact cable size to bedecided by Contrcator during execution)including all labour,materials as perspecifications of this tender,approved drgs.anddirection of Engineer-in-Charge.

15 Installation of FLP junction boxes at Sl.no.14.0 at Nos. 5entrance of each dolphin including, labour,material, transportation as perspecifications,layout drgs,and directions ofEngineer-in-Charge.

PAGE 4 OF 9


IN WORDS IN FIGURES


PRICE SCHEDULE


16 Installation, testing and commissioning of Nos. 1lighting panel/auxiliary distribution boards forapproach way lighting 100 LDB 996(on Bent 48)including all terminations as required as perenclosed SLD no.JEE-005(Rev.B)), labour,material, transportation as perspecifications,layout drgs. and directions ofEngineer-in-Charge.

17 Supply of lighting panel/auxiliary distribution Nos. 1boards for approach way lighting 100 LDB997 (on Bent 6) as per enclosed SLD no.JEE-005(Rev.B)), specifications,approved drawingsand directions of Engineer-in-Charge.

18 Installation, testing and commissioning of Nos. 1lighting panel/auxiliary distribution boards forapproach way lighting 100 LDB 997(on Bent 6)including all terminations as required as perenclosed SLD no.JEE-005(Rev.B)), labour,material, transportation as perspecifications,layout drgs. and directions ofEngineer-in-Charge.

19 Supply of 10pair flameproof telephone junction Nos. 1box along with associated flameproof doublecompression cable glands suitable for incomingand outgoing cables as per specifications of thistender,approved drawings and directions ofEngineer-in-Charge.

20 Installation of 10pair flameproof telephone Nos. 1junction box at Sl.no.19.0 along with allhardware,terminations,all material asrequired,labour,transportation as perspecifications,layout drgs. and directions ofEngineer-in-Charge.

21 Supply of flameproof (FLP suitable for IIA/IIB & Nos. 1Temp.Cl.T3)telephone set at junction of jettyapproach way and jetty head including all FLPcable glands as per approved drgs.,specifications& directions of Engineer-in-Charge.

PAGE 5 OF 9


IN WORDS IN FIGURES


PRICE SCHEDULE


22 Installation of flameproof telephone set including Nos. 1all terminations, labour,material,transportation asper specifications,layout drgs.and directions ofEngineer-in-Charge.

23 Supply & installation of lighting arrestor on top LS 1of control tower along with associated downconductor with copper earthing/strip along withall hardware/material,labour asperspecifications,approved drgs. and directions ofEngineer-in-Charge.

24 Supply,installation,testing and commissioning of LS 1balance lighting system including blackenamelled surface conduit(Type of conduit tomatch existing),balance wiring in conduits,othermiscellaneous activities related to permanentcommissioning of lighting system for controltower at jetty head control room including supplyof all balance light fittings including batteryback-up exit lights,material,labour asperspecifications,layout drgs. and directions ofEngineer-in-Charge.

25 Supply of 63Amp, 415V, 3 pole MCB with No. 1ELCB in a weatherproof enclosure for Split ACunit of Control room including supply ofincoming power supply cable and associatedcables as required for the Split AC Unit as perspecifications, layout drgs., approved drgs.&directions of Engineer-in-Charge.

26 Installation, cable termination, connection, No. 1testing and commissioning of 63Amp, 415V, 3pole MCB with ELCB in a weatherproofenclosure for Split AC unit of Control room andall incoming power supply cable and associatedcables as required for the Split AC unit includingall labour, material as per specifications, layoutdrgs, approved drgs. & directions of Engineer-in-Charge.

PAGE 6 OF 9


IN WORDS IN FIGURES


PRICE SCHEDULE


27 Installation, testing and commissioning of LS 1complete electrics for jetty tower pressuriationsystem including supply of all related electricalequipment,power and control cables as requiredoncluding incoming power supply as perspecifications, layout drgs,approved drgs.&directions of Engineer-in-Charge.

28 Installation,testing and commissioning of LS 1complete electrics for jetty tower pressuriationsystem including supply of all related electricalequipment,power and control cables as requiredoncluding incoming power supply, including alllabour,material as per specifications, layoutdrgs,approved drgs.& directions of Engineer-in-Charge.

29 Removal of existing temporary cables from M 1500existing cable trays/conduits for sizes up to4Cx16mm.sq.Cu./Al.conductor,PVC insulatedarmoured, PVC sheathed as provided fortemporarily energising the complete approachway lighting/miscellaneous lighting incoordination with other agency, includinglabour,material as per specifications anddirections of Engineer-in-Charge.

30 Supply of 2x36W FLP (suitable for gas Nos. 15gr.IIA/IIB and temp.Cl.T3) fluoroscent lightfittings for lighting under the lower deckincluding all material/accessories as required asper specifications,approved drgs.and directions of Engineer-in-Charge

31 Installation,testing and commissioning of 2x36W Nos. 15or 1x58W FLP (suitable for gas gr.IIA/IIB andtemp.Cl.T3) fluoroscent light fittings for lightingunder the lower deck including allmaterial/accessories,labour,transportation asrequired as per specifications, approved drgs.anddirections of Engineer-in-Charge

PAGE 7 OF 9


IN WORDS IN FIGURES


PRICE SCHEDULE


32 Supply of cable trays of following sizes as perenclosed specifications, including all accessoriesas required as per approved drgs. and directionsof Engineer-in-charge.

(a) 300x60 two compartments M 40(b) 225x60 two compartments M 50(c) 150x60 two compartments M 250(d) 400x60 two compartments M 4033 Intallation of cable trays of following sizes on

walkways, lower and upper decks of jetty, arounddolphins, including all accessories,labour,material as per enclosed specifications,layoutdrgs.and directions of Engineer-in-charge.

(a) 300x60 two compartments M 40(b) 225x60 two compartments M 50(c) 150x60 two compartments M 250(d) 400x60 two compartments M 4034 Supply & installation of FLP(suitable for gas Nos. 2

gr.IIA/IIB and temp.Cl.T3)12 way lightingpanel with TPN busbars, 40A incoming TPNMCB+ELCB(100mA sensitivity) and 12nos.outgoings with 10A double pole MCBs alongwith flameproof double compression cable glandsalong with all harware,material,labour,transportation, as per enclosedspecifications,layout drgs.and directions ofEngineer-in-charge.

35 Supply of following 1100V(grade), Copperconductor, PVC insulated,aprmoured,PVCsheathes cables as per IS, enclosed specifications,layout drgs. and directions of Engineer-in-Charge.

(a) 3Cx2.5mm.sq. M 500(b) 5Cx4 mm.sq. M 2500(c) 5Cx6 mm.sq. M 450(d) 4Cx10 mm.sq. M 1250(e) 4Cx35mm.sq. M 1350(f) 3.5Cx95mm.sq. M 300

PAGE 8 OF 9


IN WORDS IN FIGURES


PRICE SCHEDULE


36 Supply of following 1100V(grade), Copperconductor, twisted pair cable for telephonesystem as per enclosed specifications, layoutdrgs. and directions of Engineer-in-Charge.

(a) 5 Pair M 75(b) 2 Pair M 2537 Supply of following sizes 1100V(grade), Copper

conductor, single core cables for earthing systemas per enclosed specifications, layout drgs. anddirections of Engineer-in-Charge.

(a) 4mm.sq. M 700(b) 16mm.sq. M 2000(c) 25mm.sq. M 20038 Laying of power,control,earthing and telephne

cables on cable trays, conduits,structuresincluding all labour,material as per specifications,drgs. and directions of Engineer-in-charge

(a) Overall cable diameter upto and including 20mm M 6000(b) Overall cable diameter above 20mm and upto 30mm M 2050(c) Overall cable diameter above 30mm. M 30039 Supply and installation of 150mm wide slotted M 50

channel tray as per specifications, layoutdrgs.material,labour,transportations as perdirections of Engineer-in-Charge

40 Preparation of layout drgs/site sketches as LS 1required for completion of balance electricalactivities and updation of eaxisting electricallayout drgs.to As-Built status as perspecifications and directions of Engineer-in-Charge.

PAGE 9 OF 9

IN WORDS IN FIGURES1 Jetty Control Room A/C and Jetty Tower

PressurisationSupply of HVAC System for Jetty Control Room comprising of 4.0 TR Split A/C Units-3.0 nos. (2W + 1 S) suitably for classified area along with all accessories and fittings, Fresh air arrangement, Filters, inlet louvers, Ducting, 02 nos.Centrifugal fan of 750 m³/ hr capacity. (1w+1s), Motorised Fire Dampers, wall grilles, Door grilles, Pressure relief dampers, Structural Supports, associated Civil , Electrical and Instrumentation works etc. (For details refer Document No. 6724-00-16-44-DOC-0015, Rev. A)

One Lot

PRICE SCHEDULENAME OF WORKS : COMPLETION OF BALANCE CIVIL & ARCHITECTURAL, ELECTRICAL & MECHANICAL WORKS AT RGPPL TERMINAL DEPARTMENT : PACKAGED EQUIPMENT. DOC. NO. : 6724-00-16-44SOR-0020 (Rev-1)

SL.NO. ITEM DESCRIPTION UNIT QUANTITY INDIAN RUPEES

Page 1 of 2

2 Erection worksInstallation, repair & replacement works if any, including touch-up painting testing and commissioning, performance testing of following equipments and as per the doc. No. 6724-00-16-44-SP-0020 enclosed.

a). Quick release mooring hooks One Lot

b). Hydraulic Marine gangway One Lot

c). Centrifugal fans in jetty switch gear room including accessories.

One Lot

d). Split A/C units including accessories One Lot

Page 2 of 2

PRICE SCHEDULE

NAME OF WORKS: SCOPE OF WORK FOR INSTALLATION RELATED MARINE WORKS

INCLUDING CELL FENDER INSTALLATION AT RGPPL LNG TERMINAL


1 28.09.2007 REVISED AND ISSUED FOR BIDS 0 17.01.2007 ISSUED FOR BIDS BVK BVK VKM

REV DATE PURPOSE BY CHKD APPROVED ENGINEERS INDIA LIMITED

NEW DELHI Project RGPPL LNG TERMINAL PROJECT Client: GAIL (INDIA) LIMITED. SCHEDULE OF RATES REV Division: Engineering Department: OED 6724-00-16-56-SOR-0016

Page 1 of 7 1

EIL

SL.NO

ITEM DESCRIPTION UNIT

QUANTITY RATE AMOUNT IN WORDS IN FIGURES

1 Touch up painting to the structural steel items of the interconnecting walkways at the jetty head, access frames (interconnection of walkways on the intermediate supports WD1, WD2, WD3&WD4), stair cases etc. as per the specification, including preparation of the surface, removal of corrosion, supply of all material, mobilisation of labour, tools, tackles, all equipments, scaffolding etc and demobilisation of the same after completion of the works etc all complete.

M2

50

PRICE SCHEDULE


INCLUDING CELL FENDER INSTALLATIONAT RGPPL LNG TERMINAL


Page 2 of 7

SL.NO



2 Supply, fabrication and fixing of tubular hand rail on the navigational dolphins as per the scope of works and drawings attached, including galvanising, removal of old damaged hand rails, supply of all material, making pockets / anchor fasteners, providing non-shrink grout as required, mobilisation of labour, tools, tackles, equipments, Marine spreads as required, scaffolding, etc and de mobilisation of the same after completion of the works etc. all complete.

a) Navigational dolphins

M

35

3 Installation of safety chains on the navigational dolphins as per the drawings including, anchor fasteners for fixing the plate, mobilization of labour, tool, tackles, equipments, Marine spreads as required scaffolding, etc and de mobilisation of the same after completion o the works etc. all complete. (Safety chains will be issued free to the cont ractor for installation)

a) For Navigational dolphins ND1, ND2 & ND4.

NUMBER

3

PRICE SCHEDULE




Page 3 of 7

SL.NO



4 Supply and fabrication of the structural steel items for the clamps on piles, ladders, and other structural steel support members for the additional ladder and timber fender system if required, at the jetty head and dolphins, (in case there is shortage of clamps, ladders and associated steel works for the ladder & timber fender system), minor platform on the navigational dolphin no. ND4 (Refer Drg no. NDT004- Rev A), plates, bolts, nuts, washers and any other structural items to be fabricated for completion of the job including welding, bolting, painting mobilisation of labour, tool tackles, equipments etc all complete.

MT

3

5 Supply, fabrication and installation of steel grating for the minor platform of ND4 including supply of all material, welding, galvanizing, transporting, lifting, mobilisation of labour, tools, tackles, equipments, Marine spreads as required, scaffolding etc and removal of the same after completion of the works etc. all complete. (as per drawing no. NDT001-Rev C)

M2 10

6 Supply of timber fenders of size and details as per the drawings for the ladder and fender system on the Jetty Head, Berthing dolphins, Mooring dolphins and Navigational dolphins, including transportation to site, labour, cranes, Equipments, Marines spreads, divers etc all complete.

M3

30

PRICE SCHEDULE




Page 4 of 7

SL.NO



7 Installation of ladder, timber fender, mooring rings and all associated items as per the drawings, including transportation all material from the construction jetty, assembling, touch up painting as required, fixing clamps on the piles, fixing anchor fasteners, plates etc as required, mobilisation of labour, tools, tackles, equipments, scaffolding, cranes, Marine spreads, divers etc and demobilisation of the same after completion of the works etc all complete. (Pile clamps, ladders, steel beams that are available at site will issued free to the contractor. Refer Clause no. 5.1.2 in the scope of work document)

a) Jetty Head (Each set consisting of 1 Ladder & 4-timber fender system as per drawing no. JTH104-Rev B & GEG006 –Rev D)

b) Berthing & Mooring dolphins (Each set consisting of 1 Ladder & 2 timber fender system as per drawing no. MDT004 for Mooring dolphins & as per drg no. BDC001, 002,003&004 for Berthing dolphins – ie one set per dolphin) c) Navigational dolphins ND1 & ND2 (Each set consisting of 1 Ladder, 2 timber fender system as per drawing no. NDC001 (Rev C). ie one set each for ND1&ND2.)

SETS SETS SETS

4 8 2

PRICE SCHEDULE




Page 5 of 7

SL.NO



8

d) Navigational dolphin ND4

(1 set consisting of 1Ladder, 2-timber fender system as per drawing no. NDT001-Rev C). Removal of all temporary steel works such as temporary platforms, brackets, walkways, handrails etc on the approach trestle, jetty head, berthing dolphins, mooring dolphins, intermediate walkway supports, navigational dolphins etc. including mobilisation of all labour, tools, tackles, cranes, scaffolding etc and de mobilisation of the same after completion of the job etc. all complete.

SETS MT

1 5

PRICE SCHEDULE




Page 6 of 7

SL.NO



BRIDGESTONE FENDER INSTALLATION 9 Installation and fixing of Bridgestone Fender SUC1600H (RE+10)

in place of the damaged bottom fender at the berthing dolphin BD3, including removal of the damaged fender & handing over of the same as per the instruction of Engineer, placing and fixing of new anchor bolts, washers etc for fixing of the new fender and all associated works, removal of damaged existing bolts, transportation of the new Fender to the site, mobilisation of all labour, tools, tackles, scaffolding, marines spreads, cranes, all installation aids, de-mobilisation of the same after completion of the job, disposal of the damaged fender etc as per the scope of works, all complete. (New fender SUC1600H- RE+10 along with Anchor bolts & washers will be issued free to the contractor. The contractor shall carry out the installation activities as per he instruction of the Manufacturer’s ( Bridgestone ) representative and Engineer in charge.)

NUMBER 1

PRICE SCHEDULE




Page 7 of 7

SL.NO



10 Fixing of frontal pads on the existing frontal frame on the berthing dolphin BD3, fixing bolts, washers, including all labour, tools, tackles, scaffolding, equipments, Marine spreads etc and de-mobilisation of the same after completion of the job, all complete (Frontal pads, fixing bolts& washers will be issued free to the contractor. The contractor shall carry out the pad fixing activities as per the instruction of the Manufacturer’s (Bridgestone) representative and Engineer in charge.)

NUMBER

72

11 Removal, refixing and realignment of the frontal frame on the berthing dolphin BD3 for installation of the new fender and fixing of the frontal pads including all labour, tools, tackles, equipments, crane, marine spread etc and de mobilisation of the same after completion of the job, all complete. (The contractor shall carry out the work as per the instruction of the Manufacturer’s (Bridgestone) representative and Engineer in charge.) Ref: Drg no. BDC 003 (Rev C) and Annexures No.1 & 2

NUMBER 1

1 28.09.2007 TOUCH UP PAINTING OF PILES DELETED &

RE-ISSUED FOR BIDS FOR BIDS

0 17.01.2007 ISSUED FOR BIDS BVK BVK VKM

A 02.01.2007 ISSUED FOR GAIL COMMENTS

Rev. No Date Purpose Prepared by

Reviewed by

Approved by

Template No. 5-0000-0001-T1 Rev. 1 Copyrights EIL – All rights reserved

Document No. 6724-00-16-56-DOC-0016

Rev. No. 1 Page 1 of 11

SCOPE OF WORK FOR INSTALLATION RELATED MARINE WORKS


GAIL (INDIA) Limited

RGPPL LNG TERMINAL PROJECT

SCOPE OF WORK FOR INSTALLATION RELATED MARINE WORKS INCLUDING

CELL FENDER INSTALLATION

PREPARED BY

NEW DELHI


Document No. 6724-00-16-56-DOC-0016

Rev. No. 1 Pa Page 2 of 11



INDEX

1.0 INTRODUCTION

2.0 PROJECT DESCRIPTION

3.0 PROJECT FACILITIES

4.0 PRESENT STATUS

5.0 SCOPE OF WORK

6.0 CONTRACTOR’S RESPONSIBILITY

7.0 SPECIFICATION

8.0 ATTACHMENTS (List of Documents & drawings)


Document No. 6724-00-16-56-DOC-0016




1.0 INTRODUCTION

Government of India had entrusted the revival and restructuring of the Dabhol

Project to GAIL and NTPC (both are Government of India Undertakings). GAIL and

NTPC formed a Joint Venture Company, named Ratnagiri Gas and Power Private

Limited (RGPPL) which has taken over the assets of the Dabhol Project and shall

complete the balance works at the LNG Terminal and Power Plant, commission the

same and thereafter, operate the facilities. The balance works of completion at the

LNG Terminal are being looked after by GAIL as Owner’s Engineer to RGPPL..

GAIL has appointed Engineers India Limited (EIL), a Government of India

undertaking as their primary project management consultant for completion of

balance works of the marine facilities of the LNG terminal.

This document comprises of scope of work and technical specifications for

completion of balance civil, architectural, electrical, and HVAC works of the Jetty.

2.0 PROJECT DESCRIPTION

The configuration of the Dabhol Project consists of a 2,150 MW (net) combined

cycle power plant along with an integrated 5 MMPTA LNG Terminal located at

Anjanwel, about 340 km by road to the south of Mumbai. (India)

3.0 PROJECT FACILITIES

The marine facilities at the LNG terminal include a 2.3 km long offshore

breakwater, approach channel, 1750 m long approach trestle, jetty head

consisting of unloading platform, berthing dolphins, mooring dolphins,

intermediate walkway supports, navigational dolphins, LNG unloading arms, LNG

unloading lines, vapour return line, and other associated infrastructure. Approach

trestles, Jetty head and dolphins are supported by 762 dia steel piles and the

deck is of concrete construction.


Document No. 6724-00-16-56-DOC-0016




4.0 PRESENT STATUS

The Dabhol Project was incomplete when the construction works were stopped in

June 2001. Thereafter, since April 2002 the plant facilities have been kept under

preservation and the revival process envisages putting the facilities into commercial

operations after completing the balance jobs left in the Power Plant and the LNG

Terminal and marine works.

4.1 Marine Facilities

The EPC consortium that had carried out the design & construction of the marine

facilities has recently undertaken a detailed survey of the facilities, material

reconciliation, health audit, etc. including assessment of the balance works for

completion Jetty. Main observations from the assessment survey are as follows:

Installation of the ladders, timber fenders and mooring rings at the jetty head and

mooring dolphins are not carried out. Many of the structural steel items for the same

such as clamps for the piles, ladders, beams and mooring rings are already

fabricated and lying at the construction jetty. These are to be transported to the jetty

head and install. However any additional clamps, beams or ladders if so required

for completion of the works need to be fabricated. Timber fenders are not available

and are to be procured and supplied by the contactor.

In addition to the completion of the balance works temporary facilities provided for

the construction works such as temporary floodlights, temporary access platforms

brackets, temporary handrails, damaged handrails etc are to be removed.

4.2 Cell Fender System

As part of the above assessment survey, M/S Bridgestone, who supplied the fender

system at Jetty head, carried out detailed inspection to establish the present status

of the fender system. Four numbers of Twin fender systems of Bridgestone fenders

SUC1600H (RE+10) are installed at the berthing dolphins of the Jetty head.

( Refer Drg no. BDC 003 (Rev C) and Annexures 1 & 2) The fender systems have

not been in use ever since they were installed due to suspension of the project.

During the assessment survey, it was observed that there is a cut of approximately

5cm long and 1cm deep on the bottom fender on the berthing dolphin BD3. From


Document No. 6724-00-16-56-DOC-0016




the corrosion stain observed at the cut, it is believed that the cut has exposed the

embedded steel plate to the seawater. All fender frames are found to be in

satisfactory condition as per visual inspection except mild corrosion observed

surrounding the edges and at some spots on the back plate.

Under the exposure to direct sunlight, discoloration & surface hairline cracks were

noticed on all pads of the fender frame on BD3. It was also found that these cracks

have developed around the pad fixing bolts at the bolthole area. These cracks were

found to be quite deep which pose a risk of detachment of the bolt.

As per the recommendation by Bridgestone, the damaged rubber fender ( bottom

fender on berthing dolphin BD3 ) need to be replaced with new one, since this can

give better guarantee on the performance in future.

5.0 SCOPE OF WORK

The scope of work includes but is not limited to the following. This shall include

mobilization, de-mobilization of labour, all equipments, tools, tackles, cranes,

scaffolding, marine spreads, divers etc.

5.1.1 Installation of ladders, timber fenders and mooring rings and its

supporting steelwork at Jetty head, Berthing dolphins (BD1, BD2, BD3

& BD4), Mooring dolphins (MD1, MD2, MD3 & MD4) and Navigational

dolphins (ND1, ND2 & ND4). Including assembling, transportation to

site etc. (Steel items such as clamps for piles, beams, ladders,

mooring rings etc are lying in the construction jetty and the same shall

be used. However in case any additional clamps, beams, ladders etc

are required, the contractor shall supply the material and fabricate the

same in accordance with the drawings and the same is covered under

item no. 5 in SOR. All timber fenders, shall be supplied by the

contractor and the same is covers under SOR item no. 7)

Refer drawing numbers JHT104- Rev B,GEG006- Rev D,

BDC001,002,003&004, MDT004, NDC001- Rev C.


Document No. 6724-00-16-56-DOC-0016




5.1.2 Supply and provide touch up painting to the corroded portions of

structural steel members of the walkways, staircases, clamps, beams

etc. excluding handrails & grating. (Walkways are presently lying at

the customs jetty, which will be installed prior to start of this job

through a separate contract. Touch up painting to the walkways to be

carried after the installation of the walkways)

.

5.1.3 Supply, fabrication, transportation and erection of the minor platform,

grating and hand railing on the navigational ND4 including painting to

the structural steel members and galvanizing of grating and hand

railing. (Refer drawing no. NDT004 (Rev A)

5.1.4 Removal and disposal of damaged handrails on the approach trestle,

Jetty head, Berthing dolphins, Mooring dolphins and navigational

dolphins.

5.1.5 Supply and install new handrail as per the drawings on the

navigational dolphins including galvanizing.

5.1.6 Removal and disposal of all temporary access platforms, temporary

handrails, brackets etc from approach trestle, je tty head, berthing

dolphins, mooring dolphins, intermediate walkway supporting

dolphins, navigational dolphins etc.(Excluding the temporary walkways

presently connected between jetty head and berthing dolphins,

removal of which is included in another contract.)

5.1.7 Removal & disposal of temporary brackets and bracing from jetty

head piles..

5.1.8 Removal & disposal of temporary brackets from piles.

5.1.9 Installation of new fender & associated works.

a) Installation of one no. SUC1600H (RE+10) fender at the designated

location on berthing dolphin BD3, all complete. ( Replacement of the

existing lower fender on BD3)

b) Removal of damaged fender (Lower one of the twin fender system)

from the berthing dolphin BD3 and handing over the same to the

owner as per the instruction of Engineer-in-Charge.


Document No. 6724-00-16-56-DOC-0016




c) Fixing of new Anchor bolts for fixing the new fender at Berthing

dolphin BD3 and all associated works.

d) Fixing of new frontal pads on the existing frontal frame on the

berthing dolphin BD3 including fixing of bolts, washers etc including

removal of the frontal frame, if so required, etc all complete.

e) Re-fixing and realignment of the frontal frame to its original position, if

the same is removed for fixing of the frontal pads, all complete.

New fender SUC1600H (RE+10), Anchor bolts, Frontal pads, Pad

fixing bolts & washers will be issued free to the contractor. The scope

of installation of the above items include transportation of all material

to site, all labour, tools, tackles, equipments, scaffolding, cranes,

marine spreads as required etc all complete. Bridgestone personnel

will supervise the fender installation activities and the contractor shall

carry out the works in accordance with his instruction.

5.1.10 Any other item / work associated with the above scope of works

required to complete the job in all respects whether specifically

mentioned here or not, but required to fulfill the intended purpose of

this tender

6.0 CONTRACTOR’S RESPONSIBILITIES

6.1 Supply of all material required for completion of the works shall be in the

contractor’s scope.

6.2 Mobilization of labour, tools, tackles, equipments, all installation aids,

scaffolding, cranes, divers, marine spreads etc shall be in the contractors’

scope. Contractor shall furnish details of the same along with the offer.

6.3 Contractor shall visit the site and satisfy himself of the prevailing site

condition, nature and the magnitude of work before submitting the bid.

6.4 Steel items such as steel clamps for piles, steel beams, steel ladders,

mooring rings etc that are to be installed at the Jetty head & Dolphins are lying

in the construction jetty and the same shall be used. Contractor shall assess

the condition of the same and carry out repair works and any additional works

if required. In case any additional clamps, beams, ladders and any other


Document No. 6724-00-16-56-DOC-0016




structural steel items are required for the completion of the works, the

contractor shall supply the material and fabricate the same in accordance with

that available at site and drawings.

6.5 The contractor shall submit his methodology for the installation of new

Bridgestone fender and frontal pads on Berthing dolphin BD3 and details of

equipments, marine spread etc that will be deployed for the same.

6.6 Contractor shall furnish the details and duration of marine spread deployment,

and details of equipments, cranes, installation aids etc for completion of the job

along with the offer.

6.7 Contractor shall carry out pre-construction / pre-installation survey at site prior to

the execution of the works.

6.8 Location of the Construction Jetty / Customs Jetty, location of the Jetty head,

water depth etc, are given in the layout drawings and Elcome survey reports.

The contractor shall plan transportation of the walkways accordingly. How ever

the following details may be considered.

Water Depth at the Construction Jetty (within the River Vashishti) : Around 8m Minimum Water Depth between the Construction Jetty and the river mouth: 3.4m* (* at the mouth of River Vashishti within the channel) Water depth between River Mouth and LNG Jetty : Refer NHO Chart No. 256 Minimum Water Depth at the LNG Jetty: between 11 m to 12m Distance between the Construction Jetty and the LNG terminal: 12km. (aprox.) Contractor shall verify distance during the pre-bid survey.

6.9 As built drawings are not available. Drawings attached are of original

construction of the Jetty received form agencies that carried out the work.

These drawings may not be the latest revisions and there may be changes

at site. The contractor shall verify the details

6.10 Contractor shall take maximum care not to damage any parts of the

structures while carrying out job. In case of any damage occurred, it is

contractor’s responsibility to rectify the same to the full satisfaction of the

Engineer- in- charge without any extra cost and time.


Document No. 6724-00-16-56-DOC-0016




7.0 SPECIFICATION.

7.1.1 Structural steel shall be as mentioned in the drawings attached with

this.

7.1.2 In case of non- availability of the structural steel items specified in the

drawings, equivalent Indian sections shall be used with prior written

approval form the Engineer in charge. In such cases the contractor

shall submit data / calculations showing comparison of size and

properties of the sections for review and approval.

7.1.3 For new handrails, if the tubular members shown in the drawings are

not available, nearest equivalent available section shall be used with

prior approval by the Engineer-in-charge. In such cases the contractor

shall submit data / calculations showing comparison of size and

properties of the sections for review and approval. New handrails shall

conform to IS: 1239 / API - 5L Gr.B or equivalent.

7.1.4 For any additional structural steel works required for minor works,

structural steel shall conform to ASTM A36 or IS2062 grade A.

7.1.5 All gratings, handrails, ladders, chains, anchor bolts, bolts for

connection of timber accessories shall be hot dip galvanised as per

ASTM A123 & A153. Galvanising shall preferably be done after

cutting, shaping and welding has been done. The weight of zinc

coating shall average 915 gms per square meter (3 ounces per

square foot) and no specimen shall show less than 710 gms (2.5

ounces). The galvanised surface shall be free from bare spots, Drass

pimples, Lumpiness and runs, flux inclusions and Ash inclusions. The

composition of the zinc used in the galvanizing path shall not be less

than 98% zinc.

7.1.6 Galvanized members excluding gratings which are to be permanently

fixed to the structure by welding shall be attached after the support

members are primed but before top coats are applied. The heat-

affected areas shall be cleaned of all welding flux, blasted, and spot

primed with:


Document No. 6724-00-16-56-DOC-0016




- 1 coat of (F-8) Self priming type epoxy mastic coating

cured with polyamine hardener @ 125 Microns DFT/coat

Minimum (maximum DFT 150 microns)

- Top Coat - 2 coats of (F-2) Two-component Acrylic

Polyurethane finish paint @40 microns

DFT/coat=2x40=80 microns

Total DFT = 205 Microns minimum: Maximum 260 Microns

7.1.7 Painting to structural steel works shall be in accordance with the

specification attached with this.

7.1.8 Timber used for timber fenders shall be as per the specification

enclosed.

7 ATTACHMENTS.

a) Document

1) Price Schedule: Doc NO. 6724-00-16-56-SOR-0016 (Rev.0)

b) Civil Drawings / Documents

1) General layout: GEG 001 (RevA)

2) Dock-General lay out GEG 005 ( Rev B)

3) Break water and Dock lay out GEG 004 ( Rev A)

4) Berthing dolphins BD1 BDC 001 (Rev C)

5) Berthing dolphins BD2 BDC 002 ( Rev C)

6) Berthing dolphins BD3 BDC 003 ( Rev C)

7) Berthing dolphins BD4 BDC 004 (Rev C)

8) Mooring Dolphins Ladder + Timber fender MDT 004

9) Safety Chain MDT 005

10) Jetty approach Piling Layout JEP 005 (Rev B)

11) ESPL survey drawing : ESPL/662/RGPPL/Dabhol/397/App channel/1

12) ESPL survey drawing : ESPL/662/RGPPL/Dabhol/397/control/11

13) ESPL survey drawing : ESPL/662/RGPPL/Dabhol/397/Trestle/03

14) Ladder + Timber fender on ND4 NDT004 (Rev A)

15) Jetty approach Hand railing JET002

(Same details for Navigational dolphin handrail)

14) Navigational Dolphin Lay out and details NDC001 (Rev C)


Document No. 6724-00-16-56-DOC-0016




16) Jetty head ladder & timber fender JHT104 (Rev B)

17) Jetty Head General Lay out GEG006(Rev D)

18) Navigational Dolphin (Layout& Details) NDC001 (Rev C)

19) Navigational Dolphins – Hand rails NDT003 ( Rev A)

20) Painting Specs 6724-06-42-MPT-J06

21) Specification for timber fenders. 6724-00 16-56-Tim-001

22) Annexure –1 : Bridge stone Fender Details at jetty head

23) Annexure 2 : Bridgestone frontal frame & pad details

c) Survey

1) Bridgestone Inspection report on site survey – MF06-010-IR-RO ( For reference only)

2) Elcome survey report: ESPL/662/RGPPL/Dabhol/397 **

** Will be issued to the successful bidder

PROJECT : RGPPL LNG TERMINAL PROJECT CLIENT : GAIL INDIA LTD. PART-B


IN FIG IN WORDSPART- A : CIVIL WORKS

1 Installation of the Access frames on the intermediatewalkway supporting dolphins WD1, WD2, and WD3 &WD4 as per the details shown in the drawing (Access

NUMBER 4 0

PRICE SCHEDULE NAME OF WORKS: COMPLETION OF BALANCE CIVIL, ARCHITECTURAL, MECHANICAL AND ELECTRICAL WORKS

BIDDING DOC. NO.: 6724/T-005/07-08/AKC/17(CIVIL -- NON MARINE)

UNIT QTYSL.NO

ITEM DESCRIPTION RATE (In Rupees) AMOUNT (In Rupees)

WD4 as per the details shown in the drawing (Accessframes are the interconnection of the walkways to beinstalled on the intermediate walkway supporting dolphinsWD1, WD2, WD3 & WD4: ( Refer drawing no. WDT 106Rev A & Annexure-1) including transportation of the samefrom the construction jetty, welding, bolting, touch uppainting as required, mobilisation of all labour, tools,tackles, equipments, scaffolding etc all complete anddemobilisation of the same after completion of the woksetc all complete. (Fabricated & painted access frames ofapproximate size 1m x 1m x 1m height and approximateweight of 150kg are available at site and the same will beissued free to the contractor for installation.)

R-SOR2_Civil (Non-mar) PART-B:SOR:Page-1 of 12

IN FIG IN WORDS

UNIT QTYSL.NO


Supply, fabrication and fixing of tubular hand rail on thetrestle, jetty head and dolphins as per the scope of worksand drawings attached, including galvanising, supply of allmaterial, making pockets / anchor fasteners, providing non-shrink grout as required, mobilisation of labour, tools,tackles, equipments, scaffolding, etc and de mobilisation ofthe same after completion of the works etc. all complete.

a) For Approach Trestle & Jetty head M 150 0


M 250 0

Installation and placing of safety chains at the jetty headand dolphins as per the drawings including, anchor

3

2

and dolphins as per the drawings including, anchorfasteners for fixing the plate, transportation to site,mobilization of labour, tool, tackles, equipments,scaffolding, etc and de-mobilisation of the same aftercompletion of the works etc. all complete. (Safety chainswill be issued free to the contractor for installation)

a) For Jetty Head. NUMBER 7 0


NUMBER 29 0


IN FIG IN WORDS

UNIT QTYSL.NO


Supply, fabrication, installation and placing of safetychains at the jetty head as per the drawings includingsupply of all material, anchor fasteners for fixing the plate,mobilization of labour, tool, tackles, equipments,scaffolding, etc an de mobilisation of the same aftercompletion of the works etc. all complete. (Safety chainsare approximately 14.5m long. Details as per drawing no.WDT105)

a) For Berthing dolphins, Mooring dolphins &Intermediate walkway supporting dolphins.

NUMBER 19 0

5 Supply and providing Reinforced cement concrete of gradeM30 for the steps on the Jetty head and walkways andother minor works as required including applying epoxy

M3 2 0

4

other minor works as required including applying epoxypaint for proper bond of the old concrete to the newconcrete, supply of all material, labour, form work,scaffolding, tools tackles, equipments, curing etc allcomplete.


IN FIG IN WORDS

UNIT QTYSL.NO


Supply and placing in position high strength deformedsteel bars reinforcement (corrosion resistant conforming toIS: 1786 grade Fe415) for RCC works where ever requiredincluding transporting the steel, straightening, cleaning,decoiling, cutting, bending to the required shape, bindingwith 16SWG black soft annealed wire at everyintersection, supplying and placing with proper coverblocks, supports chairs, overlaps etc including supply of allmaterial, mobilisation of all labour, tools, tackles,equipments, scaffolding etc. all complete.

MT 0.5 0

Supply and fabrication of the structural steel items foradditional steel works for the stair cases and stair casesupports as required, ‘gap closer’ handrails, steel works for

MT 3 0

6

7

the supports of access frames, plates, bolts, nuts, washers,connecting bolts and stiffeners for the safety chains andany other structural steel items to be fabricated forcompletion of the job including welding, bolting,painting/galvanising as required, mobilisation of labour,tool tackles, equipments etc all complete.


IN FIG IN WORDS

UNIT QTYSL.NO


8 Installation of the stair cases from the jetty head to berthingdolphins BD2 & BD3, including transportation of the stairsfrom the construction jetty to the jetty head, drilling inconcrete if required, welding, bolting, fixing of thesupports for the stair cases at the jetty head and dolphinsetc , mobilisation of labour, tools, tackles, equipments,scaffolding, cranes as required etc and demobilisation ofthe same after completion of the works etc all complete.(Refer drawing no. JTH102 Rev-B)

NUMBER

2 0

Supply, fabrication and installation of balance steel gratingfor the walkways and for the access frames (Access framesare the interconnection of the walkways on theintermediate walkway supporting dolphins WD1, WD2,

M2 40 09

intermediate walkway supporting dolphins WD1, WD2,WD3 & WD4 as per drawing no.) including supply of allmaterial, welding, galvanizing, mobilisation of labour,tools, tackles, equipments, scaffolding etc and removal ofthe same after completion of the works etc. all complete.


IN FIG IN WORDS

UNIT QTYSL.NO


10 Removal of all temporary steel works such as temporarybrackets, handrails including damaged handrails etc on theapproach trestle, jetty head, berthing dolphins, mooringdolphins, intermediate walkway supporting dolphins, etc.including mobilisation of all labour, tools, tackles, cranes,trucks etc and disposal of the same as per the direction ofEngineer in charge de mobilisation of the same aftercompletion of the job etc. all complete.

MT 2 0

PART B: ARCHITECTURAL WORKS

1 Providing and fixing TAC approved Fire Check Door of 60 minutes rating (Opening size 900mm x 2100mm) including stainless steel double riveted frame (16 gauze),

Nos. 6 0

including stainless steel double riveted frame (16 gauze), 45mm thick fully insulated, asbestos free shutter of 18gauze stainless steel, double riveted facing, conforming to BS-476, part 20,22, IS-3614, part 2, ISO-834 including all hard ware, stainless steel decorative handles, latch/lock panic bar etc. all complete. (“NAVAIR” or approved equivalent make)


IN FIG IN WORDS

UNIT QTYSL.NO


2 Providing and fixing overall 35mm thick, panelled door shutter (for opening size 800mm x 2100mm as per EIL standard no. 7-75-0066) consisting of 100mm wide second class teakwood stiles and top rails and 150 mm wide lock and 200mm wide bottom rails jointed suitably and 12mm thick Teakwood Particle Board infill panels fixed with 12.5mm square moulded teakwood beading fixed by approved quality neoperene based adhesive and nailing @ max. 300mm c/c including painting the stiles, rails and panel board with two coats of approved shade and quality (ICI or equivalent) synthetic enamel paint over and including approved coat of primer, providing and fixing 11.10mm dia, 150mm long Aluminium butt hinges (max. vertical spacing not exceeding 600mm) for each shutter, fixing with door frame, all finishing, removing any stain

Nos. 1 0

fixing with door frame, all finishing, removing any stain etc.; shutter fixed to and including providing and fixing second class teakwood (conforming to IS: 4021) frames (of finished overall size 125 mm x 65 mm) including cutting, shaping, jointing, applying a coat of bituminous paint on concealed surface, wood primer on exposed surface, fixing in masonry/RCC


IN FIG IN WORDS

UNIT QTYSL.NO


by means of 300mm x25mm x6mm thick hold fasts screwed to frame @ 600mm max vertically and grouted with M-15 grade concrete in min. 350mm x 100mm x 100mm sized hole made in masonry/96mm long, 12mm dia M.S. dash fastener, painting with two coats of approved shade and make (ICI or equivalent) synthetic enamel paint over approved quality primer coat, finishing etc. all complete. The item also includes providing and fixing (with brass screws) in position approved make and quality door fittings, fixtures and accessories like pressure die cast zinc alloy, chromium plated door handles 150mm long (2 nos on each door, one on either side), 3mm thick plastic kick/push plate (200 mm wide continuous at bottom of the hat hook etc. complete.

3 Supplying and fixing fully glazed electrostatic powder Sq. M 10 03 Supplying and fixing fully glazed electrostatic powdercoated (25 micron, approved shade) aluminium fixed typewindows/ ventilators etc. including frame with INDAL/JINDAL/ approved make extruded tubular aluminiumheavy duty sections, all complete with 8.38 mm laminatedsafety glass (made of two glass panes one layers ofpolyvinyl butyral (PVB) sandwiched between them andtreated); glass fixed with rubber lining and powder coatedaluminium beading including fixing the frame to masonry/RCC by counter sunk 100mm long brass screw and dashfastener to M-20 grade concrete in minimum 150mm x150mm x 50mm sized block (for brick masonry only)/RCC, finishing, making good of any damaged work etc. allcomplete.

Sq. M 10 0


IN FIG IN WORDS

UNIT QTYSL.NO


Fixing in position the false flooring metal framework inposition (supplied by the owner) consisting of consisting ofpedestal supports made of galvanised M.S. base plate fullywelded to Galvanised M.S. threaded stud; topheadattachments having checknuts movable up and down toprovide level adjustment, the pedestals with base platesbeing fixed on floor @ 610mm c/c both ways by 6mm diax 40mm long M.S. dash fasteners; galvanised machine cutcold rolled M.S. channels snapped on to the top-headattachments in both directions to form a grid work of610mmx 610mm all complete.

0

Providing and fixing in position false flooring removablepanels (on metal framework) consisting of 35mm thick un-

0

5

Sq. M

4 Sq. M

5 10panels (on metal framework) consisting of 35mm thick un-veneered wooden particle board (3 layer flat pressed,bonded with phenol formaldehyde synthetic resinconforming to IS : 848, BWP type, categorised as Class-1for ‘surfaces of very low flame spread as per IS: 1642-1960 ) conforming to IS: 3087, finished underneath with0.05mm thick Aluminium foil turned up and extended byminimum 12mm along the panel perimeter , finished alongall four edges of panel with hard PVC lipping, includingproviding and fixing 12mm x 12mm x 75mm long 2mmthick aluminium channel cleats at the bottom of the panelsnear the center of each of the four edges, includingproviding and fixing all accessories like screws, bolts,adhesive etc.


IN FIG IN WORDS

UNIT QTYSL.NO


Providing and fixing in position (over false floor panels-existing and new ones) with 2mm thickantistatic type PVCtiles conforming to BS - 2050, table-2 and IS-3462/3461including removing soiled/ damaged PVC finish onexisting, cleaning the same with vigorous sandpaperingetc. all complete.

0

7 Providing and applying two coats of plastic emulsion paintconforming to IS: 5411 of approved shade includingcleaning and preparation of surfaces (stopping all holes anddepressions with plaster of paris, sand papering etc.) allcomplete.

Sq.M 120 0

Providing & applying 2 coats of waterproof decorativecement paint finished to approved make and approved

0

6 Sq. M 40

8 Sq. M 400cement paint finished to approved make and approvedshade, cleaning, including preparation of surfaces, curingetc. all complete.


IN FIG IN WORDS

UNIT QTYSL.NO


Providing and fixing white glazed Earthen ware doubletrap, syphonic pattern wash down water closet conformingto IS: 2556 Part II including white plastic solid seat andcover conforming to IS: 2548, CP brass hinges and rubberbuffers,10 litres capacity glazed earthenware low levelcistern conforming to IS:774 with internal overflow system& fittings, CP brass 40mm dia flush pipe,15 mm dia,450mm long PVC connection pipe, ball valve, painting ofall exposed metallic surfaces with 2 coats of approvedshade and quality synthetic enamel paint (ICI or approvedequivalent) over a priming coat of approved quality redoxide zinc chromate, cutting walls, floors and making goodof same, making inlet and outlet connections, finishingetc., also including providing necessary fixtures/accessories like 1 no. each (15 mm dia) heavy grade bib

Nos 1 09

accessories like 1 no. each (15 mm dia) heavy grade bibcock (in the wall at approved location) and stop cocks (asrequired) of spring loaded self closing type conforming toIS : 781, CP Brass Toilet paper holder of approved makewith CP hromium plated spring loaded round door stopperwith double heavy duty rubber shoes, 75mm longaluminium toilet door latch with vacant/ occup

finishing etc. all complete.


IN FIG IN WORDS

UNIT QTYSL.NO


10 Providing and fixing white glazed Earthenware HandWash Basin with anti-splash rims on 3 sides, of 550mm x400mm size conforming to IS : 2556 Part-IV, includingapproved M.S./C.I. brackets conforming to IS : 775, one15mm dia CP brass pillar cock, rubber plug with CP brasschain,32mm CP Waste fitting of standard pattern pipe with32mm dia GI pipe, C.P. brass bottle trap, cutting walls,floors and making good the same, painting all exposedmetallic surfaces with 2 coats of approved shade andquality synthetic enamel paint (ICI or approved equivalent)over an approved quality priming coat of red oxide zincchromate making all connections, finishing etc.; alsoincluding providing and fixing fixtures and accessories like15 mm dia stop cock of spring loaded self closing typeconforming to IS: 781, round edged mirror of 5.5mm thick

Nos. 1 0

conforming to IS: 781, round edged mirror of 5.5mm thick(600 x 450mm) glass with 6mm thick A.C. sheet backingand bevelled edging, fixed on wall with wooden cleats andCP brass screws, 600mm x 120mm x 4mm thick Glassshelf of approved quality with CP brass bracket and guardrails, approved quality chromium plated liquid soapcontainer; one no.

C.P.Brass towel rail 600mm long; all accessories includingfixing to wall with wooden cleats and CP brass screws,cutting walls and making good the same, finishing etc. allcomplete.

SUBTOTAL (PART-B) 0


TECHNICAL ADDENDUM No. 6724-ELECT-AD-01 DISCIPLINE : ELECTRICAL

Page 1 of 1

TECHNICAL ADDENDUM No. 6724-ELECT-AD-01 TO

BIDDING DOCUMENT FOR

COMPLETION OF BALANCE ELECTRICAL WORKS AT RGPPL LNG TERMINAL BIDDING DOCUMENT NO. 6724/T-005/07-08/AKC/17

RGPPL LNG TERMINAL PROJECT The terms, conditions, specification and stipulation of Bidding Document shall stand modified to the extent indicated under column “MODIFICATIONS / ADDITIONS/DELETIONS here below. All other terms and conditions, stipulations and specifications of Bidding Document shall remain unaltered :

SL. No.

DOCUMENT No. PAGE No. SUBJECT MODIFICATIONS/ ADDITIONS/ DELETIONS

1. 6724-00-16-50-SP-0020 Rev. No. B

8 of 14 B.4 : Installation testing and commissioning of Navigation Aid system and associated equipment (as per SOR item description) to be mounted on dolphins and jetty head of LNG jetty

DELETION : Item B.4 stands deleted from the scope of this tender. That is, Installation testing and commissioning of Navigation Aid system and associated equipment has been deleted from the scope of this tender.

2. 6724-00-16-50-SOR-0020 (Rev.1)

Sheet 13 of 16

Item 41 and its sub items a) to j) : Installation, testing and commissioning of Navigation aid items.

DELETION : Item 41 and all the sub items a) to j) stand deleted from the scope of this tender.

Attachments :

1. Revised SOR (Doc. No. 6724-00-16-50-SOR-0020 (Rev.2) No. of sheets 13)

PRICE SCHEDULE


AT DABHOL


Sheet 1 of 13

SL.NO


QUANTITY INDIAN RUPEES IN WORDS IN FIGURES

ELECTRICAL WORKS Note:- All supply material/equipment shall be sea worthy and suitable for installation on a jetty. Contractor to note that all installation works are to be carried on jetty and necessary equipment including safety equipment as required for installation works shall be in Contractor’s scope. Make of all supply items shall be subject to EIL/owner approval.

1 Testing and commissioning of existing 415V switchboard 100 LSW 998 of Merlin Gerin make including rectification/modification works for necessary cable termination for incoming and outgoing cables including supply of cable glands and lugs(as applicable), operating handles/ switches and any other rectification/modification works as required including necessary coordination with supplier(if required), supply of material as required for completion, labour, so as to make the panel operational under the directions of Engineer-in-Charge.

LS 1

PRICE SCHEDULE


AT DABHOL


Sheet 2 of 13

SL.NO



2 Supply of flameproof flood light fixtures suitable for gas group IIA,IIB and Temp.Cl.T3 and suitable for following wattage and lamp including all mounting accessories as required for mounting on existing flood light poles along with internal associated control gear box, FLP cable glands as required for cable entry but excluding lamps as per enclosed specifications,layout drgs.,approved drawings and directions of Engineer-in-Charge.

(a) 400W HPSV (SON T) Nos. 11 (b) 150W HPSV Nos. 24 3 Supply of flameproof bulkhead lighting fixtures

suitable for 60W(GLS) lamp suitable for gas group IIA,IIB and Temp.Cl.T3 including all mounting accessories as required for mounting on hand rail supported pipes along with FLP cable gland as required for cable entry but excluding lamps as per enclosed specifications,layout drgs.,approved drawings and directions of Engineer-in-Charge.

Nos. 114

4 Supply of 60W GLS lamps for item no.3.0 as per enclosed specifications,layout drgs. and directions of Engineer-in-Charge.

Nos. 114

PRICE SCHEDULE


AT DABHOL


Sheet 3 of 13

SL.NO



5 Installation of 400W HPSV Flameproof flood light fixtures along with associated control gear box on 20M & 16M high flood light poles including all cable terminations, supply & laying of internal wiring as required, labour, material as required, transportation as per specifications, layout drgs. and directions of Engineer-in-Charge.

Nos. 11

6 Installation of 150W HPSV Flameproof flood light fixtures along with associated control gear box on 6M high flood light poles including all cable terminations, supply & laying of internal wiring as required, labour, material as required, transportation as per specifications,layout drgs. and directions of Engineer-in-Charge.

Nos. 24

7 Installation of flameproof bulkhead lighting fixtures suitable for 60W(GLS) lamp suitable for gas group IIA,IIB and Temp.Cl.T3 including all mounting accessories as required for mounting on hand rail supported pipes including supply of 1M high Pipes to be supported on handrails along with internal cabling as required from FLP junction boxes up to lighting fixtures, cable terminations,labour,material as required, transportation as per enclosed specifications, layout drgs.and directions of Engineer-in-Charge.

Nos. 114

PRICE SCHEDULE


AT DABHOL


Sheet 4 of 13

SL.NO



8 Installation of 6M high flood light pole including touch up paint, rectification of minor defect due to storage for long time, all labour, material, transportation as per enclosed specifications, layout drgs.and directions of Engineer-in-charge.

Nos. 8

9 Installation of 20M high flood light pole including touch up paint, rectification of minor defect due to storage for long time, all labour, material, transportation as per enclosed specifications, layout drgs.and directions of Engineer-in-charge.

Nos. 1

10 Supply of flameproof junction boxes(to be used for circuit wiring of FLP bulkhead light fittings along walkways) suitable for gas group IIA/IIB and temp.Cl.T3 along with 4 nos,cable entries and 4 nos.FLP double compression cable glands and FLP plugs(to block unused entries) as required suitable for wiring 4Cx4mm.sq.YWY cable(Exact cable size to be decided by Contrcator during execution) including all labour,materials as per specifications of this tender,approved drgs.and direction of Engineer-in-Charge.

Nos. 57

PRICE SCHEDULE


AT DABHOL


Sheet 5 of 13

SL.NO



11 Installation of FLP junction boxes on handrails along the walkway including all cable terminations, labour,material,transportation as per specifications,layout drgs,and directions of Engineer-in-Charge.

Nos. 57

12 Supply of flameproof junction boxes(to be used for circuit wiring of FLP flood light poles on dolphins)suitable for gas group IIA/IIB and temp.Cl.T3 along with double pole MCBs for individual flood lights,5 nos.(max.)cable entries, FLP double compression cable glands, terminations, FLP plugs for unsued entries as required suitable for wiring 4Cx4mm.sq.YWY cable(Exact cable size to be decided by Contrcator during execution) including all labour,materials as per specifications of this tender,approved drgs.and direction of Engineer-in-Charge.

Nos. 12

13 Installation of FLP junction boxes at Sl.no.12.0 at entrance of each dolphin including, labour, material, transportation as per specifications,layout drgs,and directions of Engineer-in-Charge.

Nos. 12

PRICE SCHEDULE


AT DABHOL


Sheet 6 of 13

SL.NO



14 Supply of flameproof 32A TPN isolating switches in flameproof enclosure suitable for gas group IIA,IIB and Temp.Cl.T3 at the entrance of walkways for individual lighting circuits along with FLP double compression cable glands for incoming & outgoing cables of size 4Cx4mm.sq(YWY)(Exact cable size to be decided by Contrcator during execution) including all labour,materials as per specifications of this tender,approved drgs.and direction of Engineer-in-Charge.

Nos. 12

15 Installation of FLP junction boxes at Sl.no.14.0 at entrance of each dolphin including, labour, material, transportation as per specifications,layout drgs,and directions of Engineer-in-Charge.

Nos. 5

16 Installation, testing and commissioning of lighting panel/auxiliary distribution boards for approach way lighting 100 LDB 996(on Bent 48) including all terminations as required as per enclosed SLD no.JEE-005(Rev.B)), labour, material, transportation as per specifications,layout drgs. and directions of Engineer-in-Charge.

Nos. 1

PRICE SCHEDULE


AT DABHOL


Sheet 7 of 13

SL.NO



17 Supply of lighting panel/auxiliary distribution boards for approach way lighting 100 LDB 997(on Bent 6) as per enclosed SLD no.JEE-005(Rev.B)), specifications,approved drawings and directions of Engineer-in-Charge.

Nos. 1

18 Installation, testing and commissioning of lighting panel/auxiliary distribution boards for approach way lighting 100 LDB 997(on Bent 6) including all terminations as required as per enclosed SLD no.JEE-005(Rev.B)), labour, material, transportation as per specifications,layout drgs. and directions of Engineer-in-Charge.

Nos. 1

19 Supply of 10pair flameproof telephone junction box along with associated flameproof double compression cable glands suitable for incoming and outgoing cables as per specifications of this tender,approved drawings and directions of Engineer-in-Charge.

Nos. 1

20 Installation of 10pair flameproof telephone junction box at Sl.no.19.0 along with all hardware,terminations,all material as required,labour,transportation as per specifications,layout drgs. and directions of Engineer-in-Charge.

Nos. 1

PRICE SCHEDULE


AT DABHOL


Sheet 8 of 13

SL.NO



21 Supply of flameproof (FLP suitable for IIA/IIB & Temp.Cl.T3)telephone set at junction of jetty approach way and jetty head including all FLP cable glands as per approved drgs.,specifications & directions of Engineer-in-Charge.

Nos. 1

22 Installation of flameproof telephone set including all terminations, labour,material,transportation as per specifications,layout drgs.and directions of Engineer-in-Charge.

Nos. 1

23 Supply & installation of lighting arrestor on top of control tower along with associated down conductor with copper earthing/strip along with all hardware/material,labour asper specifications,approved drgs. and directions of Engineer-in-Charge.

LS 1

24 Supply,installation,testing and commissioning of balance lighting system including black enamelled surface conduit(Type of conduit to match existing),balance wiring in conduits,other miscellaneous activities related to permanent commissioning of lighting system for control tower at jetty head control room including supply of all balance light fittings including battery back-up exit lights,material,labour asper specifications,layout drgs. and directions of Engineer-in-Charge.

LS 1

PRICE SCHEDULE


AT DABHOL


Sheet 9 of 13

SL.NO



25 Supply of 63Amp, 415V, 3 pole MCB with ELCB in a weatherproof enclosure for Split AC unit of Control room including supply of incoming power supply cable and associated cables as required for the Split AC Unit as per specifications, layout drgs., approved drgs.& directions of Engineer-in-Charge.

No. 1

26 Installation, cable termination, connection, testing and commissioning of 63Amp, 415V, 3 pole MCB with ELCB in a weatherproof enclosure for Split AC unit of Control room and all incoming power supply cable and associated cables as required for the Split AC unit including all labour, material as per specifications, layout drgs, approved drgs. & directions of Engineer-in-Charge.

No. 1

27 Installation, testing and commissioning of complete electrics for jetty tower pressuriation system including supply of all related electrical equipment,power and control cables as required oncluding incoming power supply as per specifications, layout drgs,approved drgs.& directions of Engineer-in-Charge.

LS 1

PRICE SCHEDULE


AT DABHOL


Sheet 10 of 13

SL.NO



28 Installation,testing and commissioning of complete electrics for jetty tower pressuriation system including supply of all related electrical equipment,power and control cables as required oncluding incoming power supply, including all labour,material as per specifications, layout drgs,approved drgs.& directions of Engineer-in-Charge.

LS 1

29 Removal of existing temporary cables from existing cable trays/conduits for sizes up to 4Cx16mm.sq.Cu./Al.conductor,PVC insulated armoured, PVC sheathed as provided for temporarily energising the complete approachway lighting/miscellaneous lighting in coordination with other agency, including labour,material as per specifications and directions of Engineer-in-Charge.

M

1500

30 Supply of 2x36W FLP (suitable for gas gr.IIA/IIB and temp.Cl.T3) fluoroscent light fittings for lighting under the lower deck including all material/accessories as required as per specifications,approved drgs.and directions of Engineer-in-Charge

Nos.

15

PRICE SCHEDULE


AT DABHOL


Sheet 11 of 13

SL.NO



31 Installation,testing and commissioning of 2x36W or 1x58W FLP (suitable for gas gr.IIA/IIB and temp.Cl.T3) fluoroscent light fittings for lighting under the lower deck including all material/accessories,labour,transportation as required as per specifications, approved drgs.and directions of Engineer-in-Charge

Nos.

15

32 Supply of cable trays of following sizes as per enclosed specifications, including all accessories as required as per approved drgs. and directions of Engineer-in-charge.

(a) 300x60 two compartments M 40 (b) 225x60 two compartments M 50 (c) 150x60 two compartments M 250 (d) 400x60 two compartments M 40 33 Intallation of cable trays of following sizes on

walkways, lower and upper decks of jetty, around dolphins, including all accessories,labour, material as per enclosed specifications,layout drgs.and directions of Engineer-in-charge.

(a) 300x60 two compartments M 40 (b) 225x60 two compartments M 50 (c) 150x60 two compartments M 250 (d) 400x60 two compartments M 40

PRICE SCHEDULE


AT DABHOL


Sheet 12 of 13

SL.NO



34 Supply & installation of FLP(suitable for gas gr.IIA/IIB and temp.Cl.T3) 12 way lighting panel with TPN busbars, 40A incoming TPN MCB+ELCB(100mA sensitivity) and 12 nos.outgoings with 10A double pole MCBs along with flameproof double compression cable glands along with all harware, material,labour,transportation, as per enclosed specifications,layout drgs.and directions of Engineer-in-charge.

Nos. 2

35 Supply of following 1100V(grade), Copper conductor, PVC insulated,aprmoured,PVC sheathes cables as per IS, enclosed specifications, layout drgs. and directions of Engineer-in-Charge.

(a) 3Cx2.5mm.sq. M 500 (b) 5Cx4 mm.sq. M 2500 (c) 5Cx6 mm.sq. M 450 (d) 4Cx10 mm.sq. M 1250 (e) 4Cx35mm.sq. M 1350 (f) 3.5Cx95mm.sq. M 300 36 Supply of following 1100V(grade), Copper

conductor, twisted pair cable for telephone system as per enclosed specifications, layout drgs. and directions of Engineer-in-Charge.

(a) 5 Pair M 75 (b) 2 Pair M 25

PRICE SCHEDULE


AT DABHOL


Sheet 13 of 13

SL.NO



37 Supply of following sizes 1100V(grade), Copper conductor, single core cables for earthing system as per enclosed specifications, layout drgs. and directions of Engineer-in-Charge.

(a) 4mm.sq. M 700 (b) 16mm.sq. M 2000 (c) 25mm.sq. M 200 38 Laying of power,control,earthing and telephne

cables on cable trays, conduits,structures including all labour,material as per specifications, drgs. and directions of Engineer-in-charge

(a) Overall cable diameter upto and including 20mm M 6000 (b) Overall cable diameter above 20mm and upto

30mm. M 2050

(c) Overall cable diameter above 30mm. M 300 39 Supply and installation of 150mm wide slotted

channel tray as per specifications, layout drgs.material,labour,transportations as per directions of Engineer-in-Charge.

M 50

40 Preparation of layout drgs/site sketches as required for completion of balance electrical activities and updation of eaxisting electrical layout drgs.to As-Built status as per specifications and directions of Engineer-in-Charge.

LS 1

COMMERCIAL ADDENDUM NO. 1

TO

Bidding Document

VOLUME-I OF II (COMMERCIAL)

Page 1 of 1 SIGNATURE & STAMP OF BIDDER

NAME OF WORK NAME OF PROJECT

: :

COMPLETION OF BALANCE CIVIL, ARCHITECTURAL,MECHANICAL & ELECTRICAL WORKS. RGPPL LNG TERMINAL PROJECT

BIDDING DOCUMENT NO. : 6724/T-005/07-08/AKC/17 NAME OF BIDDER :

The terms, conditions, specifications and stipulations of the Bidding document and corrigendum no. 1 to NIT shall stand modified to the extent indicated herein below and subject to these modifications, all other terms, conditions, specifications and stipulations of the Bidding document shall remain unchanged.

Sl. No.

Bidding Document Reference Subject Addition/Deletion/Modification/Confirmation

Page No. Clause No.

1. Schedule of Rates

The Schedule of Rates (S.O.R.) included in the Bidding Document stand replaced with the Revised Schedule.Of.Rates (R.S.O.R). enclosed with this Commercial Addendum No. 1. Bidders are requested to submit their price strictly as per R.S.O.R. enclosed herewith. The soft copy of short description of Schedule of Rates in excel format issued in floppy earlier shall also stand replaced by the floppy enclosed herewith.

The S.O.R. enclosed with the Bidding Document shall stand superseded by the R.S.O.R enclosed with this Addendum .

We accept the above addition/modification/clarification in totality without any condition and our quoted price is inclusive of above terms and conditions.

0 28.09.2007 ISSUED AS ADDENDUM-1

Rev. No Date Purpose Prepared by

Reviewed by

Approved by


Document No. 6724-00-16-56-ADD1-0016

Rev. No. 0 Page 1 of 2

ADDENDUM-1 TO THE SCOPE OF WORK FOR INSTALLATION RELATED MARINE WORKS


GAIL (INDIA) Limited

RGPPL LNG TERMINAL PROJECT

ADDENDUM-1

TO SCOPE OF WORK FOR

INSTALLATION RELATED MARINE

WORKS INCLUDING CELL FENDER

INSTALLATION

PREPARED BY


Document No. 6724-00-16-56-ADD1-0016


ADDENDUM-1 TO THE SCOPE OF WORK FOR INSTALLATION RELATED MARINE WORKS


NEW DELHI

ADDENDUM-1

Ref. document no. 6724-00-16-56-DOC-0016 (Rev 0) dated 17/01/2007. (Scope of

work; touch up painting of piles & other installation related marine

works including cell fender installation) and document no. 6724-00-

16-56-SOR (REV 0) dated 17/01/2007 (Price Schedule)

1) Touch up painting of piles is deleted from the scope of works. Accordingly the scope of works document no. 6724-00-16-56-DOC-0016 (Rev 0) dated 17/01/2007 is revised as 6724-00-16-56-DOC-0016 (Rev 1) and enclosed with this addendum.

2) Price schedule document no. DOC No. 6724-00-16-56-SOR-0016 (Rev 0) dated 17/01/2007 is revised as 6724-00-16-56-SOR-0016 (Rev 1) and the same is attached with this addendum. Bidder shall quote prices in the revised document.

Encl: (i) Revised scope of works : Doc No. 6724-00-16-56- DOC-0016 (Rev 1) (ii) Revised Price Sehedule: Doc No.6724-00-16-56-SOR -0016 (Rev1)

DOCUMENT No. 6724-00-16-44-AD1- SP-0020

Rev 0

ADDENDUM-1 TO CIVIL & ARCHITECTURAL, ELECTRICAL & MECHANICAL WORKS AT RGPPL

LNG TERMINAL Page 1 of 4

0 05.10.2007 ISSUED AS ADDENDUM-1 TO TENDER INPUT AAN AKRC SMA

Rev. No Date Purpose Prepared

by Checked

by Approved

by Format No. EIL 1641-1924 Rev. 1 Copyright EIL – All rights reserved

ADDENDUM - 1 TO

SCOPE OF PACKAGED EQUIPMENT WORKS (MECHANICAL)

DOCUMENT No. 6724-00-16-44-AD1-SP-0020

Rev 0



Format No. EIL 1641-1924 Rev. 1 Copyright EIL – All rights reserved

The “Scope of Packaged Equipment Works” for “Balance Civil & Architectural, Electrical & Mechanical works at RGPPL LNG Terminal” ( 6724-00-16-44-SP-0020, Rev. 0) stands revised to the extent as indicated below. All other terms, conditions and specifications of the Composite Tender shall remain unaltered. Legend :- A : Add; D : Delete; M : Modify. A)Document No. : 6724-00-16-44-SP-0020 Rev. 0 (Scope of Packaged Equip. Works)

S.No.

Clause / Page no. A / D /M

DESCRIPTION

1.

2.

2.2 / 2 of 4 4.0 / 4 of 4

D

D

A

a). Refer the clause 2.2.a) Delete the word “QRMHs” b). At the end of sub-clause of 2.2 .b), i.e in the table. Delete the following items:- i).“Quick Release mooring Hook - 04 nos.( Quadriple type, 4x 150 Ton cap.each.) Capstan motors alongwith Gear box and associated items”. ii).“Quick Release mooring Hook - 04 nos.(Triple type, 3x 150 Ton cap. each.)Capstan motors alongwith Gear box and associated items”. Add the following clauses in the “ Special Instructions to the Bidder” at the end:- 4.9. Items as indicated in Annexure- 1 are available at site as per M/s Besix and M/s Strainstall AMTS survey report which are part of Hydraulic Marine Gangway. Bidder shall arrange on his own for the inspection of the Hydraulic Marine Gangway from the OEM / Specialist and arrange all the items required for the completion and commissioning of Hydraulic Marine Gangway and Control system in totality. Bidder shall be responsible for the erection, replacement and repair works on the parts which had been erected already, fabrication of structural members, painting, initial filling of lubricants, testing, commissioning of the Hydraulic Marine Gangway and its Control system, Performance testing and hand-over of the Hydraulic Marine Gangway in operating condition.

2. 4.0 / 4 of 4

A 4.10. Any item as required for commissioning of the Hydraulic Marine Gangway equipment shall be informed to Owner/Site-In-Charge. After necessary approval from Owner / Site-In-Charge, bidder shall arrange the component from Original Equipment Manufacturer. The cost of missing or replaced item / component including cost of OEM / Specialist’s service charges shall be paid as per the agreed commercial terms and conditions of the contract.

B. Document No. : 6724-00-16-44-SOR-0020 Rev. 0 (Price Schedule) 3. 2.a) D Delete the clause 2.a) under “Erection works”

“Quick release Mooring Hooks” - Lot

DOCUMENT No. 6724-00-16-44-AD1-SP-0020

Rev 0




ANNEXURE-1

1.0 Hydraulic Marine gangway is available at site in non-assembled condition and shall be handed over to Bidder on as is where is basis.

The items indicated below are available for hydraulic marine gangway erection and assembly works at site as per the report submitted by M/s BESIX and M/s STRAINSTALL AMTS. Bidder shall procure / include all other items (including any missing component) required for the complete erection and commissioning of the hydraulic marine gangway.

S.NO.

QUANTITY

DESCRIPTION

1) 01 Short Hydraulic Cylinders 2) 01 Long Hydraulic Cylinders 3) 01 Telescopic gangway ladder 4) 01 Hydraulic Power pack 5) 01 Mounting column 6) 01 Motor Mounting Swivel tube 7) 01 Bulwark ladder 8) 01 Main step ladder 9) 01 Hydraulic swivel motor 10) 01 Lower Swivel motor mounting plate 11) 01 Swivel cover plate 12) 05 Removable handrail posts 13) 01 Small plate 14) 01 Hydraulic Limit switch and cable 15) Lot Plastic Insulation washers for installation 16) 01 Remote control Panel

2.0 Following items are also available at site and in the container which shall be required

for the hydraulic marine gangway unit. It is bidder’s responsibility to carry out health check of the available parts and to use the same in their relevant area. If it can be used as a future two years spare, same shall be handed over to site in-charge in the proper packing condition.

1) As required Gangway mounting pins, brackets, nuts & bolts with washers for

assembly 2) As required Mounting pins and securing devices to install the hydraulic

Rams. 3) As required Electrical junction box with horn and operating lamp. 4) As required Anchor bolts for the gangway stanchion. 5) As required Grating mounting bolts and clips. 6) As required Hydraulic power pack operating label for the control levers. 7) As required Mounting kit for the power pack on to the platform.

DOCUMENT No. 6724-00-16-44-AD1-SP-0020

Rev 0




8) As required all seals for Hydraulic ram 9) As required Hydraulic power pack motor bearings 10) As required Hydraulic pump bearings, seals. 11) As required Operating valves 12) As required Hydraulic hoses 13) As required Hydraulic turning motor bearings, seals. 14) 01 Emergency Release switch 15) 01 Cabinet Heater to control panel 16) 01 Gangway Limit switch cable 17) 01 Gangway alarm 18) 01 Gangway flashing light 19) 08 Insulating Spacers 20) 04 Large insulating Spacers 21) 04 Very large insulating spacers 22) 1 bag Hydraulic fittings 90 degree 23) 01 Hydraulic hoses 2.60 metres 24) 01 Hydraulic hoses 4.40 metres 25) 01 Hydraulic hoses 7.80 metres 26) 02 Hydraulic hoses 0.60 metres 27) 01 Hydraulic hoses 4.85 metres 28) 01 Hydraulic hoses 1.60 metres 29) 01 Hydraulic hoses 3.15 metres 30) 01 Hydraulic hoses 3.10 metres 31) 01 Hydraulic hoses 2.40 metres 32) 01 Hydraulic hoses 3.20 metres 33) 01 Hydraulic hoses 2.25 metres 34) 01 Hydraulic hoses 2.40 metres 35) 01 Hydraulic hoses 2.50 metres 36) 02 Hydraulic Limit Switches 37) 1 bottle Hydraulic connection sealer 38) 1 box Hydraulic mounting caps 39) 01 Hydraulic oiI filter