radio all in one digiplexer 214
DESCRIPTION
RADIO ALL IN ONE DIGIPLEXER 214. The DIGIPLEXER 2/4 is the first multi-feature broadcast equipment that integrates: 2 or 4 bands of Audio Processing for FM, HD, DAB, Internet Dynamic RDS Encoding Embedded Audio Backup I/O Remote Control - PowerPoint PPT PresentationTRANSCRIPT
PAQ4411.1
RADIO ALL IN ONE DIGIPLEXER 214
The DIGIPLEXER 2/4 is the The DIGIPLEXER 2/4 is the first multi-feature broadcast equipment that integrates: first multi-feature broadcast equipment that integrates:
2 or 4 bands of Audio Processing for FM, HD, DAB, Internet
Dynamic RDS Encoding
Embedded Audio Backup
I/O Remote Control
“Designed in partnership with the Audio Gurus from Sound4”
Summary
General architecture
New Digiplexer range
Main features
Hardware features
Communication
Conclusion
PAQ4411.1
GENERAL ARCHITECTURE
General architecture – On the transmitter site Use Digiplexer 2/4 as a backup processor (i.e. 2 band version) or main one (i.e. 4 band).
Guarantee your audio with the Input/Output management and the embedded Audio Backup.
Create high quality signals: Audio, RDS, MPX.
Keep total control of the site with the I/O Remote Control functions and ScriptEasy Software.
General architecture – In the Studio Use the Digiplexer 2/4 as a main Audio
Processor at a Studio.
Process the sound for any format (FM, Web stream, HD radio…)
Encode your RDS data locally.
Configure a Monitor Audio Output for local listening.
General architecture – Studio and Tx sites Use the Digiplexer 2/4 as your main audio Processor at the Studio. (i.e. 4 band version)
Use a 2 band version at each transmitter site to generate consistent high quality signals (MPX, RDS…)
Configure each Digiplexer 2/4 remotely via TCP/IP.
Use various user access levels.
PAQ4411.1
NEW DIGIPLEXER RANGE
Product range
AUDEMAT-AZTEC high end range with innovative features :
DIGIPLEXER 2/4
(2 or 4 band versions - 1 rack unit)
SILVER range (Audio Processing with Stereo Encoding)
Silver Audio Processor 6B-FMSilver Audio Processor 4B-FMSilver Audio Processor 4Bmini-FMSilver Stereo Encoder
Silver Audio Processors are also available in AM and HD versions
The DIGIPLEXER 2/4 can be upgraded:
2-bands version 4-bands version
RDS Encoding BASIC FULL
Easy updates by Patch (TCP/IP)
Product range
PAQ4411.1
MAIN FEATURES
Main Features - Summary
RDS ENCODING
I/O REMOTE CONTROL
AUDIO BACKUP
AUDIO PROCESSING
STEREO ENCODING
skip main description
The Digiplexer 2/4 is an Audio Processor available in 2 or 4 bands
The Digiplexer 2/4 is a Stereo Encoder with very high performance.
The Digiplexer 2/4 is an Audio Backup with many security features.
The Digiplexer 2/4 can monitor and control other equipment thru its I/Os
and ScriptEasy Software.
The Digiplexer 2/4 is an RDS Encoder available in Basic or Full versions.
PAQ4411.1
AUDIO PROCESSING
Friendly and intuitive user interface shows all parameters in 1 page.Diagram of the processing structure shows audio I/O states (In use, fault, back up…)Customizable Bargraph displays
Audio Processing – User Interface
Audio Processing – General features
Digiplexer 2/4: the first processor that operates at :
192 kHz sample rate for main processing stages
1.5 MHz sample rate for the final limiter
Processing delay is non-audible (less than 5ms).
A high pass filter can be set from 1 to 200Hz in order to control sub bass.
Audio Processing – General features
Predictive AGC (Automatic Gain Control):
Corrects large audio level variations (up to 30dB)
Without any pumping effect
With a Gate function The AGC will not increase the level in case of silence
(configurable threshold)
Audio Processing – Automatic Gain Control
With the 4-band* parametric equalizer: Create your own sonic signature.
Control how the bands will work.
Use the Bass FX and the Treble FX
to dynamically enhance your bass and high frequencies.
Full mode allows access to more parameters. (on/off, frequency, filter quality, gain)
Audio Processing – Equalization and Audio Enhancement
* Even on 2-Band version
Stereo FX
Enhance your audio’s stereo effect.
A Stereo Limiter insures reception stability by controlling the L-R MPX signal – minimal multipath effects.
Audio Processing – Stereo Enhancement
Multi-Band ProcessingA unique algorithm controls the gain for each band.
‘Fidelity’ parameter enables control of audio coloration. (Purist / Processed)
Sound Impact System - a revolutionary algorithm
to preserve dynamic and peak attack perception.
Use easy mode, or full mode to access more parameters.
Audio Processing – 2 or 4 Bands Process
Multi-band Limiter
Predictive function guarantees perfect peak control without the weaknesses of standard limiters.
Mix function enables control of the balance between each band.
Use easy mode, or full mode to access to more parameters
Audio Processing – 2 or 4 Bands Limiter
HF limiter controls HF energy
FM limiter is a revolutionary 1.5 MHz clipper (older processors work at 768kHz)
A clipper that works at 1.5MHz, a sampling rate never reached before!
Virtual Composite Clipper
HD limiter for high quality digital applications (HD, DAB, DRM, Webstream...) Look ahead limiter
Low processing delay (5 ms)
Audio Processing – Final Limiters
Both peak processing paths can be used at the same time:
FM limiter for FM applications
HD limiter for digital radio applications
Audio Processing – Final Limiters
Compare Function Compare instantly current settings with other presets.
Factory and User Preset managementKeeps a complete history of your changes!Your old settings will never be lost…
Undo / Redo functionCancel any modification Compare quickly how any new setting impacts the sound.
Each processing stage or parameter can be switched on/off for easy audio comparisons
Audio Processing – Additional Features
ON/OFF
User Level (Easy/Full)
Access Controlled by Password
Various user access levelsSuper Administrator (full access)Broadcasters (no access to preset parameters)Users (no access to output levels)…
Basic mode
(easy configuration)
Full mode
(all parameters available)
Audio Processing – Additional Features
Audio Processing – Conclusion
DIGIPLEXER 2/4
Wide band gated AGC X
Tone FX 4 point parametric equalizer
Bass and Treble enhancer
X
Stereo FXStereo Enhancer
L-R Limiter
X
Multi-band ProcessMultiband Compression
Fidelity Parameter
Sound Impact System
2 or 4 bands(depending on version)
Multi-band Limiter 2 or 4 bands(depending on version)
Final Limiter (1.5MHz)HF and FM Limiter
Virtual Composite Clipper
MPX Power Limiter
HD Limiter
X
Main Features - Summary
RDS ENCODING
I/O REMOTE CONTROL
AUDIO BACKUP
AUDIO PROCESSING
STEREO ENCODING
skip main description
The Digiplexer 2/4 is an Audio Processor available in 2 or 4 bands
The Digiplexer 2/4 is a Stereo Encoder with very high performance.
The Digiplexer 2/4 is an Audio Backup with many security features.
The Digiplexer 2/4 can monitor and control other equipment thru its I/Os
and ScriptEasy Software.
The Digiplexer 2/4 is an RDS Encoder available in Basic or Full versions.
PAQ4411.1
RDS ENCODING
RDS Parameters can be configured remotely using a friendly and intuitive JAVA Interface
RDS Encoding – User Interface
General configurationEnable RDS, Level, Phase, CT,6 Reference tables (Phase / Level)UECP Address
RDS Data Configuration10 DSN / 10 PSN
PSN & EON list
Group sequence
Radiotext
RDS Encoding – Main Features
RDS Encoding – Main Features
Scrolling PS by character
Scrolling PS by Word
Up to 10 messages with specific # of repetitions
PS and RT strings can be automatically built by the Digiplexer 2/4
(using the information delivered by automation software)
If the song played is “Yellow Submarine” by “the Beatles”, the receiver display will looks like this:
“NOW PLAYING YELLOW SUBMARINE BY THE BEATLES”
RDS Encoding – Main Features
Title= Yellow Submarine
Artist= The Beatles
RDS Encoding – RDS Rebroadcasting
Re-broadcasting of any RDS data or GroupsData bridge application - any RDS information received at the MPX Input can be rebroadcast or modified
RDS data over IP (TCP/UDP)
Open Data Application can be configured for:
RT+: ODA AID = 4BD7
TMC: ODA AID = CD46
Settings available for any ODA
RDS Encoding – Open Data Application
Full RDS Encoder Parameters
PI: Program Identification codes PS: Program Service name (Scrolling PS) TP – TA: Traffic Program and Traffic Announcement flags MS: Music Speech flag DI : Decoder Identification PTY – PTYN : Program Type & Type Name AF: Alternative Frequencies list
Method A (up to 25 Frequencies) Method B (up to 900 frequencies)
RT: Radio Text (Scrolling RT) EON, CT, PTYN, SLC, PIN, LINK, Paging, IH, TDC, TMC, ODA,
EWS, Group Sequence control (up to 252 elements) 10 DSN / 10 PSN
RDS Encoding
RDS Encoding – Conclusion
DIGIPLEXER 2/4
Basic RDS EncoderAll basic RDS parameters
2 DSN/PSN
Scrolling PS and RT
Basic UECP
X
Full RDS Encoder All RDS parameters available (EON, TMC, ODA…)
10 DSN/PSN
Scrolling PS and RT
UECP
Rebroadcasting of any RDS data or group
Optional
Main Features - Summary
RDS ENCODING
I/O REMOTE CONTROL
AUDIO BACKUP
AUDIO PROCESSING
STEREO ENCODING
skip main description
The Digiplexer 2/4 is an Audio Processor available in 2 or 4 bands
The Digiplexer 2/4 is a Stereo Encoder with very high performance.
The Digiplexer 2/4 is an Audio Backup with many security features.
The Digiplexer 2/4 can monitor and control other equipment thru its I/Os
and ScriptEasy Software.
The Digiplexer 2/4 is an RDS Encoder available in Basic or Full versions.
PAQ4411.1
STEREO ENCODING
Stereo EncodingControl your modulation precisely (+/-75kHz):
1.5Mhz FM Clipper (High sampling rate never reached before!)
Use the Virtual Composite Clipper to keep a high quality MPX signal.
Control your MPX Power (ITU-R412):MPX Power Limiter that operates on the audio processing stages for better results.
Predictive Power calculation (for instantaneous MPX power display and limitation)
MPX Power Limiter and Virtual Composite Clipper are also active on any audio output configured in FM mode.
DSP technology and perfect synchronization of all subcarriers.
Audio, Pilot and RDS signals are produced in the same unit.
Stereo Encoder, highly over-sampled for amazing stereo performance.
High Quality Composite Signal
means higher audio quality for listeners Digital 15kHz filter offers very high
performance (better 19kHz stability, L-R quality…)
Stereo encoder performance that enables the audio bandwidth to be extended to 17kHz without affecting the 19kHz or L-R signals.
Stereo Encoding
Stereo Encoding – Conclusion
DIGIPLEXER 2/4
High Quality Composite Signal X
1.5MHz Final Limiter HF Limiter and FM Limiter
X
Virtual Composite Clipper X
MPX Power Limiter X
Main Features - Summary
RDS ENCODING
I/O REMOTE CONTROL
AUDIO BACKUP
AUDIO PROCESSING
STEREO ENCODING
skip main description
The Digiplexer 2/4 is an Audio Processor available in 2 or 4 bands
The Digiplexer 2/4 is a Stereo Encoder with very high performance.
The Digiplexer 2/4 is an Audio Backup with many security features.
The Digiplexer 2/4 can monitor and control other equipment thru its I/Os
and ScriptEasy Software.
The Digiplexer 2/4 is an RDS Encoder available in Basic or Full versions.
PAQ4411.1
AUDIO BACK UP & SECURITY
The Digiplexer 2/4 is an Audio Backup device that can play an audio file in case of silence on other inputs.
Play audio files previously uploaded (remotely via FTP).
Use the Backup as a 3rd audio input.
Stream the audio from a remote source
Use standard audio formats. MP3
Wave
Auto-switch between 3 audio inputs (analog, digital and backup audio)
Configure delay and threshold for silence detection.
Choose the order of priority between the 3 inputs
Configure crossfades for audio input switchovers. Fade in / fade out, for smoother audio transitions
Audio Backup
Reliability and Security:With the Digiplexer, you will always stay on the air!
In case of Audio Signal Loss:
Auto-Switch (analog, digital and internal backup audio inputs):Backup mode switches to a secondary input if silence is detected on the primary (configurable threshold and delay)Priority mode switches to a main input when audio is detected. (configurable threshold and delay – useful for local programs)
Embedded Audio Backup Play audio files previously uploaded (remotely via FTP). Stream the audio from a remote server via TCP/IPUse the Backup as a 3rd audio input.
Audio Backup – Security
Reliability and security:
With the Digiplexer, you will always stay on the air!
In case of Power Loss:
Hardware Audio Bypass (AES-AES and analog-analog)
2 second Reboot! (from power on to on air with active audio processing)
In case of system crash:
You stay On the Air: An Internal controller will automatically reboot the system, but the audio card continues to run!
The Sound4 DSP audio card is independent of the system: Plug in the Digiplexer: you are On the Air in only 2 seconds!
Audio Backup – Security
Audio Backup – Conclusion
DIGIPLEXER 2/4
Built-in Audio Backup Upload/Download 1 audio file on Hard Drive
Optional
Auto-switch Audio Inputs Silence detection, Backup/Priority modes, crossfades…
X
Hardware Audio Bypass X
Reboot in 2s X
Main Features - Summary
RDS ENCODING
I/O REMOTE CONTROL
AUDIO BACKUP
AUDIO PROCESSING
STEREO ENCODING
skip main description
The Digiplexer 2/4 is an Audio Processor available in 2 or 4 bands
The Digiplexer 2/4 is a Stereo Encoder with very high performance.
The Digiplexer 2/4 is an Audio Backup with many security features.
The Digiplexer 2/4 can monitor and control other equipment thru its I/Os
and ScriptEasy Software.
The Digiplexer 2/4 is an RDS Encoder available in Basic or Full versions.
PAQ4411.1
I/O REMOTE CONTROL
The Digiplexer 2/4 has 2 slots for I/O cards:1 Digital (status) Input Card (16 inputs)1 Relay Output Card (8 SPDT relay outputs)4 USB ports and 1 RS232 port
I/O enables control and monitoringControl RDS Parameters using the 16 digital inputs:
TA, TP, DSN, PTY, etc.
Monitor other equipment at the siteTX status, door alarms…..
Control other equipment at the site manuallyReset satellite receiver, turn on cooling fan….
Send alarms or activate relays on Digiplexer events:(i.e. reboot a faulty codec if input audio is lost….)
I/O Remote Control
ScriptEasy software to configure I/O Software tools for writing a script and programming specific actions.
Graphic interface
Based on Java Sun environment
Simulation and Real-Time play modes
I/O Remote Control – ScriptEasy Software
2 Scripting methods are available:
Tabular ScriptingEach available input on the site appears in the chartSet commands for any inputSend alarms, muting…Configure a schedule for any I/O function.
Graphic ScriptingDrag and drop any I/O into a graphic interface. Establish relationships between objectsMany objects available (action buttons, timers, logic gates…)Simulate your script for testingPlay Mode for real-time user control
I/O Remote Control – ScriptEasy Software
Many objects to create your own script. Inputs and Outputs
Math expressions
Logic elements (AND, OR, Inverter…)
Scheduler, Timer and Counter
Alarms
Action Buttons for live control
ScriptEasy can monitor Digiplexer 2/4 events:TA, TP, DSN, PTY
Switch to 1st audio Backup
Switch to 2nd Audio Backup
Fault on any audio input(analog, digital or internal audio backup)
I/O Remote Control – ScriptEasy Software – Objects Available
I/O Remote Control – Conclusion
DIGIPLEXER 2/4
ScriptEasy Software X
SNMP traps and email sending X
1 Digital Input board (16 inputs) Optional
1 Relay Output board (8 relays) Optional
Main Features - Summary
RDS ENCODING
I/O REMOTE CONTROL
AUDIO BACKUP
AUDIO PROCESSING
STEREO ENCODING
skip main description
The Digiplexer 2/4 is an Audio Processor available in 2 or 4 bands
The Digiplexer 2/4 is a Stereo Encoder with very high performance.
The Digiplexer 2/4 is an Audio Backup with many security features.
The Digiplexer 2/4 can monitor and control other equipment thru its I/Os
and ScriptEasy Software.
The Digiplexer 2/4 is an RDS Encoder available in Basic or Full versions.
PAQ4411.1
HARDWARE DESCRIPTION
Independent Sound4 audio card provides:
2.8 GIGA-FLOPS for 4-band version
1.6 GIGA-FLOPS for 2-band version
80GB Hard Drive (also used for Audio Backup)
Compact lightweight unit (1U)All in one unit
Reduced waste and electrical consumption
Hardware description
Hardware description – Front Panel
FRONT PANEL
Screen + Buttons
Status LEDs (Audio, RDS, Status, Remote)
Headphone Jack
USB Port
REAR PANELStereo Analog input
Stereo Digital input (AES/EBU / 32 - 96 kHz)
Stereo Analog output (flat or pre-emphasized)
Stereo Digital output (AES/EBU / 32 - 96 kHz – flat or pre-emphasized)
SCA Input
2 Independent TX outputs: (selectable - MPX or Pilot)
RS232 port
2 Ethernet ports
4 USB ports
2 slots for I/O cards
Hardware description – Rear Panel
PAQ4411.1
COMMUNICATION
Embedded Web Server for management and system maintenance:
IP ConfigurationsFTP and Web AccountsApplication Downloads…
Communication – Embedded Web Server
Event LogSystem eventsScriptEasy eventsI/O status changesExport to CSV
Notifications By mail By SNMP Traps
(Heartbeat, config changes, faults, alarms…)
Communication – Embedded Web Server
Configuration via:Front Panel: Main configuration and monitoring PC Software/Embedded website: Full control
Remote control via Ethernet port (TCP/IP) Embedded Web SitePC Software
I/O 16 inputs / 8 outputs (for remote control or switching TP/TA, PTYN, DSN…)
Protocols:TCP/IP HTTP, SNMP, SMTP, FTP, TelnetRDS : UECP…
Communication
PAQ4411.1
CONCLUSION
ADVANCED MULTI-BAND SOUND PROCESSORHigh processing power and sampling ratesRevolutionary Processing Features (Sound Impact System, 1.5Mhz Clipper, Stereo FX…)AGC, parametric equalization, process and limiter…
STEREO ENCODERMPX power limiter and Virtual composite clipper (DSP)High quality Digital Stereo Encoding
DYNAMIC RDS ENCODER (Scrolling, Scheduler, advanced RDS data…)
BUILT-IN BACKUP AUDIO
REMOTE CONTROL I/O ScriptEasy Software16 Digital inputs / 8 relay outputs
STANDARD INTERFACES & PROTOCOLSUSB, RS232, TCP/IP, HTTP, UECP…
USER FRIENDLYIntuitive PC software with multiple user levelsRemote access by TCP/IPSpecific access levels
EASY UPGRADESUpdates, Plug-ins, New capabilities…
Conclusion
PAQ4411.1
APPENDIX
DIGIPLEXER 2/4VS
Digiplexer FMX480
Additional features: A real broadcast sound processor based on revolutionary technology. The best clipper on the marketSpecific presets like FMX480 (for compatibility)User friendly software interfacesBuilt-in backup audio systemEasy to upgrade equipment
Hardware evolutions:Headphone jack, Screen, buttons, touch pad…Optional I/O remote control with ScriptEasy software
Comparison versus Digiplexer FMX480
PAQ4411.1
ROAD MAP
Audio over IP input Streaming output
DIGIPLEXER 2463U Rack unit with 12” touchscreen2/4/6 bands of processing FM/HD/DABRDS encoderStereo generatorAudio BackupAudio over IPDual power supplyLinux Based OS on CF Card1W/20W/100W FM exciter
Road Map
Any questions ?
AUDEMAT SATel. : +33 (0)5 57 928 928
E-mail : [email protected] site : www.audemat.com
Head office : Parc d'activités J.F Kennedy 20, avenue Neil Amstrong
F-33700 Bordeaux - Mérignac - FRANCE
AUDEMAT INCTel. : +1 305 249 3110
E-mail : [email protected] site : www.audemat.com
19595 NE 10th Av. Suite AMiami, FL 33179 - USA
Audemat contacts