purica system...the purica is a commerical/industrial water system value designed to produce up to...
TRANSCRIPT
PURICA SystemHigh Purity Water System750 to 8,800 GPD Generation &
5 to 20 GPM Delivery
The PURICA is a commerical/industrial water system value designed to
produce up to 6.0 US gpm (22.7 lpm) of pure water to a storage and
delivery system that can pump up to 20 US gpm (75.7 lpm) of high
quality water to various points of use. The systems are designed to be
customizable in order to deliver maximum flexibility and value to the end
user. With a wide variety of flow rates, storage tank sizes, and available
optional components, the PURICA is desgined to meet almost any cost
sensitive water treatment application.
Typical Applications
• Commercial Applications
• Industrial Processes
• Central Laboratory
• Boiler Feed Water
• Humidification Systems
• Process Ingredient Water
• Rinse Water
• Cosmetic Applications
Operating Parameters
Reverse Osmosis System
• Feed Water: Potable
• Feed Pressure Range: 60 psig (4.1 bar)
• Operating Pressure: 220 psig (15 bar)
• Operating Temperature: 55-85°F (13-30°C)
• Production Design Temperature: 77°F (25°C)
• Recovery Range: 33-75%
• Nominal Rejection: 95-98%
Standard Features
Make-up Water System
• Automatic Carbon Filter System
• Automatic Water Softening System
• Fleck Control Valves with SXT controller
• 1.0 Micron Graded Density Pre-Filter
• Automatic Inlet Shut-Off Valve
• Flow Control Center, Including Concentrate and Recycle Valves
• Low Inlet Pressure Switch
• Conductivity Meter
• Stainless Steel Pump
• Permeate & Concentrate Flow Meters
Customizable Storage and Distribution System
• Flat or Conical Bottom Tank
• Tank Level Float
• Multi-Stage 316 SS Centrifugal Pump, TEFC
• 0.2 Micron Vent Filter & Optional Final Filter
Typical Applications
• Variable Speed Drive Distribution Pump(s)
• 254nm Distribution Disinfection Ultraviolet System
• Loop Service Exchange DI Polishing
• Water By-pass System
• 0.2 micron Final FIlter
• Myron L Digital Resistivity Monitor
WATERSMART™
Commercial & Industrial Water Assurance Program
MAR COR
©2017 Mar Cor Purification. All rights reserved. P/N: 3031913 Rev. AVisit www.mcpur.com for more information or call 1-800-633-3080
Mar Cor Purification4450 Township Line RoadSkippack, PA 19474-1429Tel: (484) 991-0220 Toll Free: (800) 346-0365Fax: (484) 991-0230
Mar Cor Purification14550 28th Avenue NorthPlymouth, MN 55447Tel: (484) 991-0220 Toll Free: (800) 633-3080Fax: (763) 210-3868
Mar Cor Purification1119 Paulsun StreetSan Antonio, TX 78219Tel: (210) 227-3601Toll Free: (800) 268-5035Fax: (210) 227-0735
Mar Cor Purification160 Stedman StreetLowell, MA 01851Tel: (978) 453-9600 Toll Free: (800) 633-3080Fax: (978) 453-1223
Mar Cor Purification 6351 Orangethorpe Ave.Buena Park, CA 90620Tel: (714) 736-9990 Toll Free: (800) 633-3080Fax: (714) 736-9402
Technical Data
Process Flow Diagram
Product Specifications
PURICA High Purity Water System
Model Number PURICA 750 PURICA 1690 PURICA 2535 PURICA 4400 PURICA 6600 PURICA 8800
Product Flow Rate at 77°F (25°C) 0.5 US gpm (1.9 lpm)
1.2 US gpm (4.5 lpm)
1.8 US gpm (6.8 lpm)
3.0 US gpm (11.4 lpm)
4.5 US gpm (17.0 lpm)
6.0 US gpm (22.7 lpm)
Recovery Range 30-50% 50-75%
Dimensions & Weight Dependent on model and options selected
Customer RequirementsModel Number PURICA 750 PURICA 1690 PURICA 2535 PURICA 4400 PURICA 6600 PURICA 8800
Feed Water - Operation 1.0 US gpm (3.7 lpm)
2.5 US gpm (9.5 lpm)
4.0 US gpm (15.1 lpm)
4.0 US gpm (15.1 lpm)
6.0 US gpm (22.7 lpm)
8.0 US gpm (30.2 lpm)
Feed Water - Filter Backwash 7.0 US gpm (26.5 lpm) 8.0 US gpm (30.2 lpm)
Drain 8.0 US gpm (30.2 lpm)
Electrical - Pretreatment Duplex Rec, 115V 10 Amp Circuit (2 Amp Draw)
Electrical - RO Unit Controls N/A 115 V, 10 Amp
Electrical - RO Unit 115 V, 20 Amp 208-230/460V, 3-phase, 10 Amp
LoopSDI
LoopSDI
Flow
WaterSoftener
CarbonTank
ColdWater
LoopReturn
Point of Use
BoosterPump
Reverse OsmosisSystem
0.2/1 MicronFilter
Polyethylene Storage
Tank
Prefilter
DisinfectionDistribution
Pump
TotalizingMeter
TotalizingMeter