properites of carbon steels 1018 plus related metals
TRANSCRIPT
6/10/12 Properites of Carbon Steels 1018 plus related metals
1/4www.suppliersonline.com/Research/Property/metals/816.asp
Home properites of 1018 Search:
Find below the search results for the material you've specified. Please note here this
information is NOT to be used for design purposes, and in no event shall MSO be liable for any
damages arising from the misuse of this information
Carbon Steels 1018
Related Metals: StarDOM 1018(tm) Get Quotes
Specifications: AMS 5069
ASTM A29 (1018)
ASTM A510 (1018)
ASTM A512 (1018)
ASTM A513
ASTM A519 (1018)
ASTM A544 (1018)
ASTM A545 (1018)
ASTM A548 (1018)
ASTM A549 (1018)
ASTM A576 (1018)
ASTM A611 (D-1)
ASTM A635 (1018)
ASTM A659 (1018)
ASTM A794 (1018)
ASTM A830
MIL J-1397 (1018)
MIL J-403 (1018)
MIL J-412 (1018)
MIL S-11310 (CS 1018)
SAE J1397
SAE J403
SAE J412
UNS G10180
Chemistry Data
Carbon 0.14 - 0.2
Iron Balance
Manganese 0.6 - 0.9
Phosphorus 0.04 max
Sulphur 0.05 max
General Information
Principal Design Features
6/10/12 Properites of Carbon Steels 1018 plus related metals
2/4www.suppliersonline.com/Research/Property/metals/816.asp
1018 is among the most commonly available grades available in the world. It is widely available
in cold finished rounds, squares, flat bar and hexagons. Despite its unimpressive mechanical
properties, the alloy is easily formed, machined, welded and fabricated. Due to its higher Mn
content, it can, in thin sections, be hardened to Rc 42.
Applications
The alloy is a free machining grade that is often employed in high volume screw machine parts
applications. It is commonly employed in shafts, spindles, pins, rods, sprocket assemblies and
an incredibly wide variety of component parts.
Machinability
1018 is rated at 62% of 1112 carbon steel. The alloy can be easily brought to a fine finish, its
chips are continuous and hard and it can be machined in all conditions.
Forming
1018 can be easily formed in the annealed condition.
Welding
1018 has been successfully welded using most all the common practices including gas,
resistance, oxyacetylene, and submerged melt welding.
Heat Treatment
1018 can, in thin sections be case hardened to Rc 42. In thicker sections, over 4", Rc 28-30 can
be obtained.
Forging
Forge this alloy in the range of 1825-2300 F.
Hot Working
1018 can easily be hot worked.
Cold Working
Cold working 1018 will have a significant affect on hardness and mechanical properties.
Intermediate annealing is required to overcome its tendency to work harden.
Annealing
A full anneal can be achieved by soaking at 1650 F followed by furnace cooling. Process
annealing can be done at 1200 F.
Hardening
See heat treatment and cold working notes.
6/10/12 Properites of Carbon Steels 1018 plus related metals
3/4www.suppliersonline.com/Research/Property/metals/816.asp
Physical Data
Density (lb / cu. in.) 0.283
Specific Gravity 7.82
Specific Heat (Btu/lb/Deg
F - [32-212 Deg F])
0.116
Mean Coeff Thermal
Expansion
6.7
Mechanical Data
Form Round Bar
Condition Annealed
Temper 68
Tensile Strength 60
Yield Strength 44
Elongation 35
Reduction of Area 67
Brinnell 127
Form Round Bar
Condition Hot Rolled
Temper 68
Tensile Strength 68
Yield Strength 50
Elongation 36
Reduction of Area 65
Brinnell 143
Form Round Bar
Condition Normalized
Temper 68
Tensile Strength 66
Yield Strength 50
Elongation 36
Reduction of Area 68
Brinnell 135
Disclaimer
This information is provided "as is" and Metal Suppliers Online, LLC makes no warranty of any kind with respect to the subject
matter or accuracy of the information contained herein. Metal Suppliers Online, Inc. specifically disclaims all warranties,
expressed, implied or otherwise, including without limitation, all warranties of merchantability and fitness for a particular
6/10/12 Properites of Carbon Steels 1018 plus related metals
4/4www.suppliersonline.com/Research/Property/metals/816.asp
purpose.
In no event shall Metal Suppliers Online, Inc. be liable for any special, incidental, indirect or consequential damages of any kind
or any damages whatsoever resulting from loss of use, data, profits, whether or not advised of the possibility of damage, and
on any theory of liability, ar ising out of or in connection with the use of the information contained herein.
This publication may include technical inaccuracies or typographical errors. Changes may be per iodically made to the
information herein.
Use of this Web Site constitutes acceptance of the Metal Suppliers Online User Agreement.
Copyr ight © 1995-2012 Metal Suppliers Online, LLC. All Rights Reserved.
Metal Suppliers Online Pr ivacy Policy | Contact Us